an independent variable (IV) that you can change. • Typical IV's might be number of fins, length of rocket, type of material, mass of the rocket. • Choose one dependent variable (DV) and make three launches per DV for each IV for a total of. six launches..
Explanation:
A driver in a car is driving 65 m/s when she sees a
police car. Over 10 seconds, the driver slows down
to a velocity of 22 m/s to avoid getting a ticket.
What is the deceleration of the car over that 10
seconds? (Include units in your answer.)
Answer:
43 m\s in the 10 seconds?
Explanation:
A car is traveling with an initial velocity of 15 m/s when the driver decides to go faster by accelerating at 5 m/s squared for 10 seconds. How far did the car travel during this time?
Answer:
x = 400 [m]
Explanation:
To solve this problem we must use the following kinematics equations, first, we find the final speed, and then we proceed to find the distance traveled.
[tex]v_{f}=v_{i} +(a*t)\\[/tex]
where:
Vf = final velocity [m/s]
Vi = initial velocity = 15 [m/s]
a = acceleration = 5 [m/s^2]
t = time = 10 [s]
Note: the positive sign in the Equation indicates that the car is accelerating, i.e. its speed is increasing.
Now replacing
Vf = 15 + (5*10)
Vf = 65 [m/s]
Now using the second equation:
[tex]v_{f} ^{2}= v_{i} ^{2}+(2*a*x)[/tex]
where:
x = distance traveled [m]
x = (65^2 - 15^2)/ (2*5)
x = 400 [m]
The most popular throw in ultimate frisbee is the what?
Answer:
The hammer.
Explanation:
The most practiced throw in Ultimate. A hammer is an overhead throw held with the forehand grip
Answer:
HAMMER.
Explanation:
Ah, the hammer. The most practiced throw in Ultimate. A hammer is an overhead throw held with the forehand grip
What is the pressure exerted by a column of water 80 cm high ?
Answer:
[tex]P=7,840\ Pa[/tex]
Explanation:
Pressure Exerted by a Column of Liquid
The pressure P exerted by a column of liquid of height h and density ρ is given by the hydrostatic pressure equation:
P = ρgh
Where ρ is the density of the liquid, g is the acceleration of gravity g=9.8m/s^2, and h is the height of the column of liquid.
The data provided is as follows:
[tex]\rho=1000\ Kg/m^3[/tex]
[tex]g=9.8m/s^2[/tex]
[tex]h=80\ cm = 0.8\ m[/tex]
The pressure is:
[tex]P = 1000\ Kg/m^3\cdot 9.8\ m/s^2 \cdot 0.8\ m[/tex]
[tex]\boxed{P=7,840\ Pa}[/tex]
Saturn is 1,200,000,000 kilometers from earth. What is the distance in standard form using meters?
Answer:
That would be 1,200,000,000,000Explanation:
Hope this helpsWhich sentence describes the direction in which heat flows between any two objects?
A.
Heat flows from the object with less internal energy to the object with more internal energy.
B.
Heat flows from the object with a higher specific heat to the object with a lower specific heat.
C.
Heat flows from the object with a lower specific heat to the object with a higher specific heat.
D.
Heat flows from the object at a higher temperature to the object at a lower temperature.
Answer: D just took the test
Explanation:
Answer:
D
Explanation:
A sprinter running a 100 m race starts at rest, accelerates at constant acceleration of magnitude A for 2 seconds, then runs at a constant speed until the end. Find the position (relative to the start) and speed of the runner at the end of the 2 seconds, in terms of A.
Answer:
The distance ran by the runner in the 2 seconds is 2·A
The speed of the runner at the end of the 2 seconds is 2·A
Explanation:
The given information are;
The distance the sprinter is running = 100 m
The initial constant acceleration of the sprinter, a = A
The duration of the initial acceleration, t = 2 s
The initial speed of the printer, u = 0 (The sprinter starts from rest)
The rate with which the sprinter then runs with to the end = Constant speed
Therefor, we have, from the equation of motion;
s = u × t + 1/2 × a × t²
Where;
s = The distance ran by the sprinter
∴ at t = 2 seconds, we have;
s = 0 × 2 + 1/2 × A × 2² = 1/2 × A × 4 = 2·A
The distance ran by the runner in the 2 seconds = 2·A
The speed, v, of the runner at the end of the 2 seconds is given as follows;
v = u + a × t
When t = 2 seconds, we have;
v = 0 + A × 2 = 2·A
The speed of the runner at the end of the 2 seconds = 2·A.
What is the acceleration of the car from 0 to 2 s ? - What is the magnitude of the net force exerted on the car from 0 - 2s ? - What is the acceleration of the car from 2 s to 4s - What is the magnitude of the force exerted in stopping the car ? What is the instantaneous velocity at 1 ?
Answer:
a) a = 0 m / s²
, b) a = 0 ==> F = 0
, c) a = - 2 m / s²
,d) v = 4 m/s
Explanation:
a) It is asked to find the acceleration in the interval from 0 to 2s, from the graph we see that in this interval the velocity is constant with a value of 4 me / s, therefore the average eceleration is
a = (V₂ - V₁) / t
a = (4 -4) / 2
a = 0 m / s²
b) Newton's second law establishes a relationship between force and acceleration
F = m a
as acceleration is zero
a = 0 ==> F = 0
c) the acceleration in interval 2 a4 S
a = (0 - 4) / (4-2) = -4 / 2
a = - 2 m / s²
The negative sign iniquity the acceleration is slowing the movement
d) the force is
F = m a
F = 2 m
e) from the graph we can read the speed of the vehicle for time
v = 4 m / s
What is the density of a 36 g object with a volume of 15 cm3? (Density: D = )
0.42 g/cm3
0.54 g/cm3
2.4 g/cm3
5.4 g/cm
Answer:
The answer is 2.4 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 36 g
volume = 15 cm³
We have
[tex]density = \frac{36}{15} = \frac{12}{5} \\ [/tex]
We have the final answer as
2.4 g/cm³Hope this helps you
(BRAINLIEST AND 13 POINTS) Which two variables have an effect on the momentum of an object?
a. mass and position b. mass and velocity c. position and velocity
Answer:
B mass and velocity......................
explain the types of motion
Answer:
there are three type of notion
Pete rides his horse 64 km in 4 hours.
What is his average speed in kilometers
per hour?
Given:
D=64 km
T=4 hour
Answer:
His average speed is
[tex] \frac{64km}{4h} = {16kmh}^{ - 1} [/tex]
The part of a longitudinal wave where the particles are spread apart is called a______?
Here are the choose of answers: A- Top Wave has the highest pitch because it has the highest amplitude.
B - Bottom Wave has the highest pitch because it has the lowest frequency.
C- Bottom Wave has the highest pitch because it has the highest frequency.
D- Both waves have the same pitch because they both have the same frequency
A car is driving at a velocity of 24 m/s. If its brakes can supply an acceleration of -5.0 m/s2, how much time will be required to bring the car to a stop?
10.2 s
-29 s
0 s
4.8 s
how will you place the coin inside the glass without touching it?
hmmmmmmmmmmmmmmmmmmmmm
The sound of frequency greater than 20,000 Hz is called ....
20,000 112 से अधिक आवृति की ध्वनि
कहा जाता है।
Positive electrode is called
घनात्मक इलेक्ट्रोड को
कहते हैं।
d.
Answer:
ultra sound... follow me
A materials density is the same , no matter how large or small the sample is or what it’s shape is as long as it is solid uniform piece of the material explain how this is possible and give an example
Answer:
See the explanation below
Explanation:
Density is defined as the relationship between mass and volume, i.e. the following equation can be used:
density = m/v
where:
density [kg/m^3]
m = mass [kg]
v = volume [m^3]
If we change the volume of a body by reducing its size, its mass will also decrease proportionally with a density as seen in the equation.
m = density*v
To understand this concept more clearly, let's use the following example:
We know that the density of water is equal to 1000 [kg/m^3], that is, 1 cubic meter of water contains 1000 kilograms of water, using the equation.
1000 = m /1
m = 1000*1 = 1000 [kg]
Now if we have 500 kilograms of water, that would pass with the volume so that the density remains constant.
1000 = 500/v
v = 500/1000
v = 0.5 [m^3]
We can see that the volume of water has halved. Since the mass of water was reduced by half. That is, the relationship between mass and volume is proportional to the density of the material or substance.
A car is traveling on a level road at a constant rate of speed. What additional force is necessary to bring the car into equilibrium? zero. greater than the normal force times the coefficient of static friction. the normal force times the coefficient of kinetic friction. equal to the normal force times the coefficient of static friction.
Answer: Zero.
Explanation:
By the first Newton's law, we know that:
every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force.
Now, we know that the car is moving with constant speed, then there is no net force acting on the car, which means that the car is already in equilibrium.
Then if we add one force to the situation, the car will not be anymore in equilibrium.
The correct option is zero.
From the moment a 40 m/s fastball touches the catcher’s mitt until it is completely stopped takes 0.012 s. Calculate the average acceleration of the ball as it is being caught.
Answer:
3333.33 m/s²
Explanation:
From the question given above, the following data were obtained:
Total Velocity (v) = 40 m/s
Total Time (t) = 0.012 s.
Average acceleration (a) =..?
Average acceleration can be defined as follow:
Average acceleration (a) = Total velocity (v) / total time (t)
a = v / t
With the above formula, we can obtain the average acceleration of the ball as shown below:
Total Velocity (v) = 40 m/s
Total Time (t) = 0.012 s.
Average acceleration (a) =..?
a = v / t
a = 40 / 0.012
a = 3333.33 m/s²
Therefore, the average acceleration of the ball is 3333.33 m/s².
A wave traveling at 100 m/s has a frequency of 200Hz. What is the wavelength of this wave?
Can two vectors of an unequal magnitude add up to give a vector with a magnitude of zero?
When does air become turbulent around a thrown ball?
A. On the smooth side of a ball
B. On the rough side of a ball
C. On the right side of a ball
Answer: B (on the rough side)
Thanks for using Brainly! Vote Biden 2020
Hope we influenced your vote!
Air will become turbulent around a thrown ball on the rough side of the ball because it will cause the air waves to be irregular. Option B is the right answer.
When an object is moving in air, it moves smoothly if the shape is streamlined and the body of the object is smooth.
An object will experience turbulence when the air waves are violent and are irregular.
Therefore, air will become turbulent around a thrown ball on the rough side of the ball because it will cause the air waves to be irregular.
The correct answer is option B.
Learn more about turbulence here: https://brainly.com/question/4853035
12. The resistivity of a given wire of cross-sectional
area 0.7mm 4.9 x 10raised to the power of -4ohm mm. Calculate the
resistance of a 2ohm length of the wire
R = resistivity × (l/A), A = πr^2= πd^2/4
2 =( 4.9 × 10^ -4) * (l/π0.7^2/4)
make l the subject and calculate.
i assumed we are looking for the length if the wire.
1.
What is a force? What changes can be produced by a force?(AS)
Answer:
the pull or push which changes or tends to change the position of an object from rest to motion or motion to rest is called force.
Changes of force that can be produced:
Force can change the shape of a body.Force can change the position of a body.Force can stop the moving body.Force can change the speed of a moving body.Force can change the direction of a moving body.2. _____ - changes in appearances of the Moon as viewed from Earth, due to the relative positions of the Moon, Earth, and the Sun.
A. Maria
B. Moon phase
C. Solar eclipse
D. Lunar eclipse
Answer:
Moon Phase
Explanation:
hello what is quantum physics
Answer:
It is a fundamental theory in physics that provides a description of the physical properties of nature at the scale of atoms and subatomic particles.
Which of the following examples shows that a chemical reaction has occurred?
O A solid is formed when heat is removed from a sample of water.
A rock breaks into smaller pieces when it is struck with a hammer.
O A cup of water turns pink when a few drops of red food coloring are added.
Bubbles form when baking soda is added to vinegar and mixed.
Formation of bubbles when baking soda and vinegar are mixed is an example showing a chemical reaction has occurred as these two substances on mixing form sodium acetate.
What are chemical reactions?
Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.
There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical reactions:
1) inorganic reactions
2)organic reactions
3) biochemical reactions
During chemical reactions atoms are rearranged and reactions are accompanied by an energy change as new substances are formed.
Learn more about chemical reactions,here:
https://brainly.com/question/14929452
#SPJ2
What is the displacement when t =2s to 3s
Answer:
t=5s
Explanation:
t=2 + t= 3s = t= 5s
A 2.50-mL sample of ammonia gas (NH3) is heated from 325 kelvin to 425 kelvin. What is the new volume of the sample?
Answer:
The new volume of the [tex] NH_{3}[/tex] sample is 3.27mL.
Explanation:
Given the following data;
Original Volume, V1 = 2.50-mL
Original Temperature, T1 = 325K
New Temperature, T2 = 425K
To find new volume V2, we would use Charles' law.
Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Charles is given by;
[tex] VT = K[/tex]
[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]
Making V2 as the subject formula, we have;
[tex] V_{2}= \frac{V1}{T1} * T_{2}[/tex]
[tex] V_{2}= \frac{2.50}{325} * 425[/tex]
[tex] V_{2}= 0.0077 * 425[/tex]
V2 = 3.27mL
Therefore, new volume of the [tex] NH_{3}[/tex] sample is 3.27mL.
Which of the following statement is not true regarding liquid pressure?
liquid pressure increases as the height of liquid column increases.
liquid pressure increases with increase in density of the liquid
liquid pressure at same depth is same
liquid pressure is not affected by acceleration due to gravity