Answer:
Replace /* Your code goes here */ with
for(i =0; i<NUM_VALS; i++) {
printf("%d", origList[i]*offsetAmount[i]);
printf(";");
}
Explanation:
The first line is an iteration statement iterates from 0 till the last element in origList and offsetAmount
for(i =0; i<NUM_VALS; i++) {
This line calculates and print the product of element in origList and its corresponding element in offsetAmount
printf("%d", origList[i]*offsetAmount[i]);
This line prints a semicolon after the product has been calculated and printed
printf(";");
Iteration ends here
}
How many times will the while loop that follows be executed? var months = 5; var i = 1; while (i < months) { futureValue = futureValue * (1 + monthlyInterestRate); i = i+1; }
Answer:
4 times
Explanation:
It will be executed for values 1,2,3 and 4 for i.
You turn on your Windows computer and see the system display POST messages. Then the screen goes blank with no text. Which of the following items could be the source of the problem?
1. The video card
2. The monitor
3. Windows
4. Microsoft word software installed on the system.
Similar to Wi-Fi, ____ is designed to provide internet access to fixed locations (sometimes called hot zones), but the coverage is significantly larger
Answer:
WiMAX.
Explanation:
WiMAX is an acronym for Worldwide Interoperability for Microwave Access, it is a wireless communications which is primarily based on the IEEE 802.16 standards for creating Metropolitan Area Network (MAN) for the internet users.
Similar to Wi-Fi, WiMAX is designed to provide internet access to fixed locations (sometimes called hot zones), but the coverage is significantly larger.
WiMAX is capable of covering large metropolitan distance of several kilometers while Wi-Fi covers just a local (short) area measured in meters.
Generally, WiMAX was invented by the WiMAX forum and is a telecommunications standard protocol that provides fixed and fully mobile internet access services over a wide range.
Use the following cell phone airport data speeds (Mbps) from a particular network. Find P10. 0.1 0.1 0.3 0.3 0.3 0.4 0.4 0.4 0.6 0.7 0.7 0.7 0.8 0.8
Answer:
[tex]P_{10} =0.1[/tex]
Explanation:
Given
[tex]0.1, 0.1, 0.3, 0.3, 0.3, 0.4, 0.4, 0.4, 0.6, 0.7, 0.7, 0.7, 0.8, 0.8[/tex]
Required
Determine [tex]P_{10}[/tex]
[tex]P_{10}[/tex] implies 10th percentile and this is calculated as thus
[tex]P_{10} = \frac{10(n+1)}{100}[/tex]
Where n is the number of data; n = 14
[tex]P_{10} = \frac{10(n+1)}{100}[/tex]
Substitute 14 for n
[tex]P_{10} = \frac{10(14+1)}{100}[/tex]
[tex]P_{10} = \frac{10(15)}{100}[/tex]
Open the bracket
[tex]P_{10} = \frac{10 * 15}{100}[/tex]
[tex]P_{10} = \frac{150}{100}[/tex]
[tex]P_{10} = 1.5th\ item[/tex]
This means that the 1.5th item is [tex]P_{10}[/tex]
And this falls between the 1st and 2nd item and is calculated as thus;
[tex]P_{10} = 1.5th\ item[/tex]
Express 1.5 as 1 + 0.5
[tex]P_{10} = (1 +0.5)\ th\ item[/tex]
[tex]P_{10} = 1^{st}\ item +0.5(2^{nd} - 1^{st}) item[/tex]
From the given data; [tex]1st\ item = 0.1[/tex] and [tex]2nd\ item = 0.1[/tex]
[tex]P_{10} = 1^{st}\ item +0.5(2^{nd} - 1^{st}) item[/tex] becomes
[tex]P_{10} =0.1 +0.5(0.1 - 0.1)[/tex]
[tex]P_{10} =0.1 +0.5(0)[/tex]
[tex]P_{10} =0.1 +0[/tex]
[tex]P_{10} =0.1[/tex]
1. Railroad tracks present no problems for a motorcyclist.
A. O TRUE
B. O FALSE
2. Which of the following is considered to be a vulnerable road user?
A. Bicyclists
B. Motorcyclists
C. Pedestrians
D. all of the above
Answer: 1 is A
2 is D
Explanation:
Explain ways that computer-related errors are associated with the people using those computers. Contrast that with errors made by the computer systems directly.
Answer and Explanation:
Computer related errors associated with people that use these computers are errors that are made by human beings in instructing(or programming) the computer to do or complete a certain task. This could involve such things as moving paper based data to the computer(electronic data) where the human could enter incorrect data or inconsistent programs or code.
Computer related errors which directly have to do with the computer consist of error thrown by the system as a result of ineffective code or software related issues or faulty hardware. In either case all computer related errors are inherently caused by humans since a computer would only take instruction given to it.
A cache has been designed such that it has 512 lines, with each line or block containing 8 words. Identify the line number, tag, and word position for the 20-bit address 94EA616 using the direct mapping method.
Answer:
Given address = 94EA6[tex]_{16}[/tex]
tag = 0 * 94 ( 10010100 )
line = 0 * 1 D 4 ( 111010100 )
word position = 0*6 ( 110 )
Explanation:
using the direct mapping method
Number of lines = 512
block size = 8 words
word offset = [tex]log ^{8} _{2}[/tex] = 3 bit
index bit = [tex]log^{512}_{2}[/tex] = 9 bit
Tag = 20 - ( index bit + word offset ) = 20 - ( 3+9) = 8 bit
Given address = 94EA6[tex]_{16}[/tex]
tag = 0 * 94 ( 10010100 )
line = 0 * 1 D 4 ( 111010100 )
word position = 0*6 ( 110 )
Write a method named removeDuplicates that accepts a string parameter and returns a new string with all consecutive occurrences of the same character in the string replaced by a single occurrence of that character. For example, the call of removeDuplicates("bookkeeeeeper") should return "bokeper" .
Answer:
//Method definition
//Method receives a String argument and returns a String value
public static String removeDuplicates(String str){
//Create a new string to hold the unique characters
String newString = "";
//Create a loop to cycle through each of the characters in the
//original string.
for(int i=0; i<str.length(); i++){
// For each of the cycles, using the indexOf() method,
// check if the character at that position
// already exists in the new string.
if(newString.indexOf(str.charAt(i)) == -1){
//if it does not exist, add it to the new string
newString += str.charAt(i);
} //End of if statement
} //End of for statement
return newString; // return the new string
} //End of method definition
Sample Output:
removeDuplicates("bookkeeeeeper") => "bokeper"
Explanation:
The above code has been written in Java. It contains comments explaining every line of the code. Please go through the comments.
The actual lines of codes are written in bold-face to distinguish them from comments. The program has been re-written without comments as follows:
public static String removeDuplicates(String str){
String newString = "";
for(int i=0; i<str.length(); i++){
if(newString.indexOf(str.charAt(i)) == -1){
newString += str.charAt(i);
}
}
return newString;
}
From the sample output, when tested in a main application, a call to removeDuplicates("bookkeeeeeper") would return "bokeper"
Use the loop invariant (I) to show that the code below correctly computes the product of all elements in an array A of n integers for any n ≥ 1. First use induction to show that (I) is indeed a loop invariant, and then draw conclusions for the termination of the while loop.
Algorithm 1 computeProduct(int[ ] A, int n)
p = a[0]
i = 0
while i < n − 1 do
//(I) p = a[0] · a[1] · · · a[i] (Loop Invariant)
i + +
p = p · a[i]
end while
return p
Answer:
Given Loop Variant P = a[0], a[1] ... a[i]
It is product of n terms in array
Explanation:
The Basic Step: i = 0, loop invariant p=a[0], it is true because of 'p' initialized as a[0].
Induction Step: Assume that for i = n - 3, loop invariant p is product of a[0], a[1], a[2] .... a[n - 3].
So, after that multiply a[n - 2] with p, i.e P = a[0], a[1], a[2] .... a[n - 3].a[n - 2].
After execution of while loop, loop variant p becomes: P = a[0], a[1], a[2] .... a[n -3].a[n -2].
for the case i = n-2, invariant p is product of a[0], a[1], a[2] .... a[n-3].a[n-2]. It is the product of (n-1) terms. In while loop, incrementing the value of i, so i=n-1
And multiply a[n-1] with p, i.e P = a[0].a[1].a[2].... a[n-2].
a[n-1]. i.e. P=P.a[n-1]
By the assumption for i=n-3 loop invariant is true, therefore for i=n-2 also it is true.
By induction method proved that for all n > = 1 Code will return product of n array elements.
While loop check the condition i < n - 1. therefore the conditional statement is n - i > 1
If i = n , n - i = 0 , it will violate condition of while loop, so, the while loop will terminate at i = n at this time loop invariant P = a[0].a[1].a[2]....a[n-2].a[n-1]
A brand of shame .. from infancy " is a brand on Jocasta
Answer: DIDN'T UNDERSTAND
in an agile team who is responsible for tracking the tasks
Answer:
All team members
Explanation:
In respect of the question, the or those responsible for tracking the tasks in an agile team comprises of all the team members.
Agile in relation to task or project management, can be refer to an act of of division of project or breaking down of project or tasks into smaller unit. In my opinion, these is carried out so that all team members can be duly involved in the tasks or project.
What is the value of the variable named myNum after the statements that follow are executed? var myNum = 14; var yourNum = 4; myNum++; yourNum-- myNum = myNum * yourNum;
Answer:
45
Explanation:
Initially, myNum is equal to 14 and yourNum is equal to 4
Then, myNum is incremented by 1 and becomes 15
Also, yourNum is decremented by 1 and becomes 3
Finally, myNum is set to myNum x yourNum, 15 x 3 = 45
Explain why it is not necessary to create an inbound rule on the internal 192.168.12.10 Windows server so that it can receive the response (ICMP echo reply) from the internal 192.168.12.11 Windows server.
Answer:
The file and printer sharing (Echo Request - ICMPv4-In) rule option should be listed for all profile.
Explanation:
The main reason why it is not compulsory or obligatory to design an inbound rule on the internal 192.168.12.10 Windows server in other to be able to accept the response (ICMP echo reply) generated from the internal 192.168.12.11 Windows server is that the file and printer sharing (Echo Request - ICMPv4-In) rule option or alternative needed to be listed for all profile.
Inbound rules filter or sieve traffic advancing from the network to the local computer based on the filtering conditions set out in the rule.
in terms of computer what does mie mean
Answer:
Microsoft Internet explorer
What is industry 4.0 -automation revolution-, what is your opinion about the direction this revolution is taking the industry in, and discuss the fate of unskilled and semi-skilled workers affected by industry 4.0.
Answer:
Find the explanation below.
Explanation:
1. Industry 4.0 -automation revolution is a term first used in Germany in 2011 to describe the fourth generation of the industrial revolution. It is the incorporation of digitalized procedures that use smart technology that can work in real-time to industrial production. This means that the machines used in production can independently interact between themselves to accomplish tasks that would otherwise have needed human involvement.
2. My opinion regarding this industrial revolution is that it is a welcome development for businesses because it will help them execute projects at faster rates and limit some working expenses.
3. Unskilled and Semi-skilled workers will be badly affected by this revolution because tasks ordinarily performed by them would be mostly taken over by these machines. This means that companies would most likely lay off these workers whose jobs would now be performed by machines. Job regulation agencies would do well to seek ways to intervene for this group of workers. They may also have to improve their skills if they want to remain relevant to their jobs.
The revolution, however, would be favorable for high-skilled workers because they would be needed to perform jobs such as the maintenance and programming of these machines.
A developer writes a SOQL query to find child records for a specific parent. How many levels can be returned in a single query?
Answer:
One.
Explanation:
In this case, when a developer writes a SOQL query in order to find to find child records for a specific parent, one search will return only one child. One level down i.e., from parent to child, or five levels up i.e., from child to parent. Note that SOQL statements will not return relationships that are greater than one level apart from the root entity object.
What will be displayed if code corresponding to the following pseudocode is executed? Set Number = 4 Repeat Write 2 * Number Set Number = Number + 2 Until Number = 8
Answer:
8
12
Explanation:
I made the code a bit easier to understand then worked out how it would go. Here's what I did.
number = 4
repeat until number = 8:
write 2 * number
number = number + 2
Following this itenary, we have, the system first writes "8" as it multipled 4 by 2. Number is now equal to 6.
Next repetition, the system writes "12" as it multipled 6 by 2. Now, number = 8. The proccess now stops as number is now equal to 8.
Lily is in her first year of undergraduate coursework and has not yet declared a major. She has attended a lot of career fairs and undergraduate major "open house" events to investigate her options. Marcia's theory of identity status suggests that the dimension Lily is most concerned with is the_____of 1 dimension.
Answer:
exploration
Explanation:
According to Marcia's theory of identity, the status suggests that the dimension Lily is most concerned with is the exploration dimension.
James E. Marcia who came up with the Marcia's theory of identity is a clinical and developmental psychologist. He also once taught at Simon Fraser University which is located in British Columbia, Canada and also in the State University of New York at Buffalo in Upstate, New York City.
James E. Marcia is also very much involved in clinical private practice, community consultation, clinical psychology supervision, and also in international clinical-developmental research and teaching.
How many times does the following loop execute? double d; Random generator = new Random(); double x = generator.nextDouble() * 100; do { d = Math.sqrt(x) * Math.sqrt(x) - x; System.out.println(d); x = generator.nextDouble() * 10001; } while (d != 0); exactly once exactly twice can't be determined always infinite loop
Answer:
The number of execution can't always be determines
Explanation:
The following points should be noted
Variable d relies on variable x (both of double data type) for its value
d is calculated as
[tex]d = \sqrt{x}^2 - x[/tex]
Mere looking at the above expression, the value of d should be 0;
However, it doesn't work that way.
The variable x can assume two categories of values
Small Floating Point ValuesLarge Floating Point ValuesThe range of the above values depend on the system running the application;
When variable x assumes a small value,
[tex]d = \sqrt{x}^2 - x[/tex] will definitely result in 0 and the loop will terminate immediately because [tex]\sqrt{x}^2 = x[/tex]
When variable x assumes a large value,
[tex]d = \sqrt{x}^2 - x[/tex] will not result in 0 because their will be [tex]\sqrt{x}^2 \neq x[/tex]
The reason for this that, the compiler will approximate the value of [tex]\sqrt{x}^2[/tex] and this approximation will not be equal to [tex]x[/tex]
Hence, the loop will be executed again.
Since, the range of values variable x can assume can not be predetermined, then we can conclude that the number of times the loop will be executed can't be determined.
Oops, we made a mistake: we created a key "short" and gave it the value "tall", but we wanted to give it the value "long" instead. Write the line of code that will change the value associated with the key "short" to "long". Be consistent in whether you use single or double quotes to declare your strings: our autograder assumes you'll be consistent.
Answer:
Using java
//assuming that hashmap object name is ChangeMap
ChangeMap. replace("short", "long");
System.out.println("New HashMap: "
+ ChangeMap.toString());
Explanation:
From the above we have used the replace method to replace the value of the "short" key in the hashtable with "long" instead of the previous value "tall". We have used the printed the hashtable to the console using println and the ".toString()" method that we added to the function's parameter.
A systems analyst attended a week-long workshop on Agile software development. When she returned to her job, she told her boss that agile practices were not worth the time to learn and use on the job. Her view was that it was too academic and idealistic to be useful. Do you agree or disagree?Defend your position.
Answer:
The answer is "disagree"
Explanation:
The system analyst is responsible, who uses research and methods of solving industrial problems with IT. He or she may act as representatives of change that identify, that process improvements needed design systems for such improvements, or inspire us to use systems.
Analysts testing and diagnosing issues in operating systems for QA applications and the programmer analyst design and write custom software, that satisfy the requirements of their employers or customers. For the system analysis, the analyst uses all types of techniques, which may be old's, that's why we disagree with the analyst.Some systems analysts maintain that source documents are unnecessary. They say that an input can be entered directly into the system, without wasting time in an intermediate step.
Do you agree? Can you think of any situations where source documents are essential?
Answer:
The summary including its given subject is mentioned in the portion here below explanatory.
Explanation:
No, I disagree with the argument made by 'system analyst' whether it is needless to preserve source records, rather, therefore, the details provided input would be fed immediately into the machine. Different source document possibilities can be considered may play a significant role in accessing data.Assumed a person experiences a problem when collecting and analyzing data that has no complete access or that individual is not happy with the system or that may want comprehensive data search. However, a need arises to keep data both sequentially and fed further into the desktop system that would help us through tracking purposes.Even with all the documentation that has been held is essentially for the user to do anything efficiently and conveniently without even any issues and 'device analyst' would guarantee that it has been applied in a very well-defined way.You are a project manager for Laredo Pioneer's Traveling Rodeo Show. You're heading up a project to promote a new line of souvenirs to be sold at the shows. You are getting ready to write the project management plan and know you need to consider elements such as policies, rules, systems, relationships, and norms in the organization. Which of the following is not true? A These describe the authority level of workers, fair payment practices, communication channels, and the like. B This describes organizational governance framework. C This describes management elements. D This is part of the EEF input to this process.
Answer:
A. These describe the authority level of workers, fair payment practices, communication channels, and the like.
Explanation:
As seen in the question above, you have been asked to write the project management plan and know that you need to consider elements such as policies, rules, systems, relationships and standards in the organization. These elements are part of EEF's entry into this process, in addition they are fundamental and indispensable for the description not only of the organizational governance structure, but also describe the management elements that will be adopted and used.
However, there is no way to use them to describe the level of authority of workers, fair payment practices, communication channels and the like, as this is not the function of this.
Teachers in most school districts are paid on a schedule that provides a salary based on their number of years of teaching experience. For example, a beginning teacher in the Lexington School District might be paid $30,000 the first year. For each year of experience after this first year, up to 10 years, the teacher receives a 2% increase over the preceding value. Write a program that displays a salary schedule, in tabular format, for teachers in a school district. The inputs are:
Answer:
Here is the python code:
StartingSal = int(input("Enter the starting salary: "))
AnnualIncrease = (int(input("Enter the annual % increase: ")) / 100)
Years = int(input("Enter the number of years: "))
for count in range(1,Years+1):
print("Year ", count, " Salary: ", StartingSal*((1+AnnualIncrease)**(count-1)))
Explanation:
This program prompts the user to enter starting salary, percentage increase in salary per year and number of years.
The for loop has range function which is used to specify how many times the salaries are going to be calculated for the number of years entered. It starts from 1 and ends after Years+1 means one value more than the year to display 10 too when user inputs 10 days.
The year and corresponding salary is displayed in output. At every iteration the starting salary is multiplied by annual percentage increase input by user. Here count is used to count the number of salaries per year, count-1 means it will start from 30000.
A Fast Critter moves twice as fast as a regular critter. When asked to move by n steps, it actually moves by 2 * n steps. Implement a Fast Critter subclass of Critter whose move method behaves as described.
Answer and Explanation:
The code:
FastCritter.java
Public class FastCritter
{
public static void main(string[]args)
{
Critter DoubleFast = new FastCritter();
DoubleFast.move(10);
System.out.println(DoubleFast.getHistory());
system.out.println(" the critter object will move to 20]");
}
}
in the above, the critter class is assumed to have been defined and the the object DoubleFast which moves twice the distance of the Critter was achieved by using the move method which was defined in the critter class. The move method takes the position of the Critter and adds the steps given to its parameter to the object's move thus getting twice the distance. The get history is assumed to get the history of positions and moves made by the object in an array as defined in the class
Alcatel-Lucent’s High Leverage Network (HLN) increases bandwidth and network capabilities while reducing the negative impact on the environment. HLN can handle large amounts of traffic more efficiently because __________.
Answer:
The networks are intelligent and send packets at the highest speed and most efficiently.
Explanation:
Alcatel-Lucent was founded in 1919, it was a French global telecommunications equipment manufacturing company with its headquarter in Paris, France. Alcatel-Lucent provide services such as telecommunications and hybrid networking solutions deployed both in the cloud and on properties.
Alcatel-Lucent’s High Leverage Network (HLN) increases bandwidth and network capabilities while reducing the negative impact on the environment. This high leverage network can handle large amounts of traffic more efficiently because the networks are intelligent and send packets at the highest speed and most efficiently. HLN are intelligent such that it delivers increased bandwidth using fewer devices and energy.
Generally, when the High Leverage Network (HLN) is successfully implemented, it helps telecommunications companies to improve their maintenance costs, operational efficiency, enhance network performance and capacity to meet the bandwidth demands of their end users.
Assume userName equals "Tom" and userAge equals 22. What is displayed in a dialog box when the following statement is executed? alert(userAge + " \nis " + userName + "'s age.");
Answer:
22
is Tom's age.
Explanation:
Since userAge is initialized as 22, 22 will be displayed in a line. Then, since there is a "\n" which means go the new line, the program will display in the new line. is will be displayed. Since userName is initialized as Tom, Tom will be displayed. Then 's age. will be displayed in the same line.
Availability is an essential part of ________ security, and user behavior analysis and application analysis provide the data needed to ensure that systems are available. baseline infrastructure applications network
Answer:
Network.
Explanation:
Availability is an essential part of network security, and user behavior analysis and application analysis provide the data needed to ensure that systems are available.
Availability in computer technology ensures that systems, applications, network connectivity and data are freely available to all authorized users when they need them to perform their daily routines or tasks. In order to make network systems available regularly, it is very essential and important to ensure that all software and hardware technical conflicts are always resolved as well as regular maintenance of the systems.
A network administrator can monitor the network traffics and unusual or unknown activities on the network through the user behavior analysis and data gathered from the application analysis to ensure the effective and efficient availability of systems.
A large population of ALOHA users manages to generate 50 requests/sec, including both originals and retransmissions. Time is slotted in units of 40 msec.
Required:
a. What is the chance of success on the first attempt?
b. What is the probability of exactly k collisions and then a success?
c. What is the expected number of transmission attempts needed?
Answer:
The answer is below
Explanation:
Given that:
Frame transmission time (X) = 40 ms
Requests = 50 requests/sec, Therefore the arrival rate for frame (G) = 50 request * 40 ms = 2 request
a) Probability that there is success on the first attempt = [tex]e^{-G}G^k[/tex] but k = 0, therefore Probability that there is success on the first attempt = [tex]e^{-G}=e^{-2}=0.135[/tex]
b) probability of exactly k collisions and then a success = P(collisions in k attempts) × P(success in k+1 attempt)
P(collisions in k attempts) = [1-Probability that there is success on the first attempt]^k = [tex][1-e^{-G}]^k=[1-0.135]^k=0.865^k[/tex]
P(success in k+1 attempt) = [tex]e^{-G}=e^{-2}=0.135[/tex]
Probability of exactly k collisions and then a success = [tex]0.865^k0.135[/tex]
c) Expected number of transmission attempts needed = probability of success in k transmission = [tex]e^{G}=e^{2}=7.389[/tex]
A byte addressable direct-mapped cache has 1024 blocks/lines, with each block having eight 32-bit words. How many bits are required for block offset, assuming a 32-bit address
Answer and Explanation:
"The inquiry as presented is not necessarily responsible. A word has been states as 32-bit. We need to ask if the frame is "byte-addressable" (From this we can access to get an 8-bit piece of information) or "text-addressable" (the smallest open lump is 32-bit) or maybe "half-word-addressable" (the tiny bundle of information it could reach to 16-bit).
To understand what the smallest request bit of a position is to let anyone know, you have to remember this.
You operate from base up at that stage. We will agree with the byte-addressable structure. Every reserved square at a certain point contains 8 words * (4 bytes/word) = 32 = 25 bytes, so the counterbalance seems to be 5 bits.
The history in a direct-mapped stored is the squares in reserves (12 bits for this position due to 212 = 4096). at a certain point, as you have seen, the tag is also one of the bits left behind.
As the reserve becomes increasingly cooperative. And a similar size remains. These are lesser bits on the list and more bits on the mark.'