lock of mass m2 is attached to a spring of force constant k and m1 . m2. If the system is released from rest, and the spring is initially not stretched or com- pressed, find an expres- sion for the maximum displacement d of m2

The work done by tensional force of the rope is 2.25 J and the work done by gravity is 36.75 J.

The given parameters;

The work done by the tension is calculated as follows;

W = Fd

W = 15 x 0.15

W = 2.25 J

The work done by gravity is calculated as;

W = (25 x 9.8) x 0.15

W = 36.75 J

Thus, the work done by tensional force of the rope is 2.25 J and the work done by gravity is 36.75 J.

Learn more here: https://brainly.com/question/19498865

Answer:

Explanation:

The volume of the spherical balloon is expressed as V = 4/3πr³ where r is the radius of the spherical balloon. If the spherical balloon is inflated with gas at the rate of 500 cubic centimetres per minute then dV/dt = 500cm³.

Using chain rule to express dV/dt;

dV/dt = dV/dr*dr/dt

dr/dt is the rate at which the radius of the gallon is increasing.

From the formula, dV/dr = 3(4/3πr^3-1))

dV/dr = 4πr²

dV/dt = 4πr² *dr/dt

500 =  4πr² *dr/dt

If radius r = 40;

500 = 4π(40)² *dr/dt

500 = 6400π*dr/dt

dr/dt = 500/6400π

dr/dt = 5/64π

dr/dt  = 0.245cm/min

Hence, the radius of the balloon is increasing at the rate of 0.245cm/min

Answer:

6.8%

Explanation:

According to Stefan-Boltzmann law, radiation is directly proportional with temperature raised to the fourth power:

P ∝ T⁴

Writing a proportion:

P₁ / P₂ = T₁⁴ / T₂⁴

1.3P / P = (T₁ / T₂)⁴

T₁ / T₂ = ∜1.3

T₁ = 1.068 T₂

The temperature increased by 6.8%.

Answer:

The moment of inertia of a slender uniform rod of length L about an axis at one end perpendicular to the rod is [tex]I = \frac{1}{3}\cdot m \cdot L^{2}[/tex].

Explanation:

Let be an uniform rod of length L whose origin is located at one one end and axis is perpendicular to the rod, such that:

[tex]\lambda = \frac{dm}{dr}[/tex]

Where:

[tex]\lambda[/tex] - Linear density, measured in kilograms per meter.

[tex]m[/tex] - Mass of the rod, measured in kilograms.

[tex]r[/tex] - Distance of a point of the rod with respect to origin.

Mass differential can translated as:

[tex]dm = \lambda \cdot dr[/tex]

The equation of the moment of inertia is represented by the integral below:

[tex]I = \int\limits^{L}_{0} {r^{2}} \, dm[/tex]

[tex]I = \lambda \int\limits^{L}_{0} {r^{2}} \, dr[/tex]

[tex]I = \lambda \cdot \left(\frac{1}{3}\cdot L^{3} \right)[/tex]

[tex]I = \frac{1}{3}\cdot m \cdot L^{2}[/tex] (as [tex]m = \lambda \cdot L[/tex])

The moment of inertia of a slender uniform rod of length L about an axis at one end perpendicular to the rod is [tex]I = \frac{1}{3}\cdot m \cdot L^{2}[/tex].

Answer:

The dimension of mass can be represented as:  [tex][F^{1} T^{1} V^{-1} ][/tex]

Explanation:

We have  Force = Mass X Acceleration

                           = Mass X [tex]\frac{Change in Velocity}{Time Taken}[/tex]

                or, Mass  = Force x [tex]\frac {Time Taken } { Change in Velocity }[/tex]

                             So, dimensions of mass  = [tex]\frac{[F][T]}{[V]}[/tex]

                                                                       = [tex][F^{1} T^{1} V^{-1} ][/tex]

Answer:

Vf = 14.7 m/s

Explanation:

Vf² = Vi² + 2 * a * Δy

given:

a = 9.81 m/s²

Δy = 11m

Vi = 0 when upon release

Vf² = 0 + 2 (9.81) 11

Vf = 14.7 m/s

The velocity of the ball when it hits the ground will be 14.7 m/s.

The change of displacement with respect to time is defined as the velocity.  Velocity is a vector quantity. it is a time-based component. Velocity at any angle is resolved to get its component of x and y-direction.

given:

a(gravitational acceleration) = 9.81 m/s²

s (distance)= 11m

v is final velocity

u is the initial velocity

From Newton's second equation of motion;

[tex]\rm v^2 = u^2+2as \\\\ v^2=2 \times 9.81 \times 11 \\\\ v= 14.7 \ m/sec[/tex]

Hence, the velocity of the ball when it hits the ground will be 14.7 m/s.

To learn more about the velocity refer to the link ;

https://brainly.com/question/862972

#SPJ2

Answer:

one with only gravity acting upon it

Explanation:

Edgenuity :)

Answer:

Explanation:

The rod will act as pendulum for small oscillation .

Time period of oscillation

[tex]T=2\pi\sqrt{\frac{l}{g} }[/tex]

angular frequency ω = 2π / T

= [tex]\omega=\sqrt{\frac{g}{l} }[/tex]

b )

ω = 20( given )

velocity = ω r = ω l

Let the maximum angular displacement in terms of degree be θ .

1/2 m v ² = mgl ( 1 - cosθ ) ,

[ l-lcosθ is loss of height . we have applied law of conservation of mechanical energy .]

.5 (  ω l )² = gl( 1 - cos θ )

.5 ω² l = g ( 1 - cosθ )

1 - cosθ  = .5 ω² l /g

cosθ = 1 - .5 ω² l /g

θ can be calculated , if value of l is given .

Answer:

53.3micro meters

Explanation:

See attached file

Answer:

7.91 m/s

Explanation:

Speed: This can be defined as the ratio of this to time. Speed can also be the magnitude of a velocity or speed is velocity without direction.

The S.I unit of speed is m/s.

From the question,

K.E = 1/2(mv²)................ Equation 1

Where K.E = Kinetic Energy, m = mass of the runner, v = velocity of the runner.

make  v the subject of the equation

v = √(2K.E/m).................Equation 2

Given: K.E = 1.09×10³ J, m = 34.8 kg.

Substitute into equation 2

v = √(2× 1.09×10³/34.8)

v = √(62.64)

v = 7.91 m/s.

Hence the speed of the runner = 7.91 m/s

Answer:

you need momentum in order to release energy. For example, if you need to push something heavy and you get a running head start, then it will be easier.

Explanation:

Answer:

a) h = 13,205.4 m

b)  r_f = 2.12 106 m

c)        e% = 0.68%

Explanation:

a) This is an exercise we are asked to use energy conservation,

Starting point. On the surface of Mimas

        Em₀ = K = ½ m v²

Final point. Where the ball stops

       [tex]Em_{f}[/tex] = U = m g h

        Em₀ = Em_{f}

        ½ m v² = m g h

         h = ½ v² / g

let's calculate

         h = ½ 41² / 0.0636

         h = 13,205.4 m

b) For this part we are asked to use the law of universal gravitation, write the energy

starting point. Satellite surface

           Em₀ = K + U = ½ m v² - GmM / r_o

final point. Where the ball stops

            [tex]Em_{f}[/tex]= U = - G mM / r_f

          Em₀ = Em_{f}

          ½ m v² - G m M / r_o = - G mM / r_f

In this case all distances are measured from the center of the satellite

         1 / rf = 1 / GM (-½ v² + G M / r_o)

let's calculate

         1 / rf = 1 / (6.67 10⁻¹¹ 3.75 10¹⁹) (- ½ 41 2 + 6.67 10⁻¹¹ 3.75 10¹⁹ / 1.98 105)

         1 / r_f = 3,998 10⁻¹¹(-840.5 + 12.63 10³)

          1 / r_f = 4,714 10⁻⁷

          r_f = 1 / 4,715 10⁻⁷

          r_f = 2.12 106 m

to measure this distance from the satellite surface

          r_f ’= r_f - r_o

          r_f ’= 2.12 106 - 1.98 105

         r_f ’= 1,922 106 m

c) the percentage difference is

          e% = 13 205.4 / 1,922 106 100

          e% = 0.68%

The estimate of part a is a little low

Answer:effective

Explanation:

Answer:

f1 / f2 = n2 / n1  

Explanation:

To solve this problem, we should remember that the formula for index of refraction is defined as:

n = c / v

or

n v = c

Where,

n = index of refraction

c = speed of light

v = speed of light in the medium

Since speed of light is constant, then we can simply equate the materials 1 and 2:

n1 v1 = n2 v2

Where the speed of light in the medium (v) can be expressed as:

v = w * f

Where,

w = wavelength of light

f = frequency of light

Therefore substituting this back into the relating equation:

n1  w1 f1 = n1  w2 f1

Since it is given that the light is monochromatic, w1 = w2, this further simplifies the equation to:

n1 f1 = n2 f2

f1 / f2 = n2 / n1                  (ANSWER)

Answer:

Explanation:

know that there is no external force on skater and the stone so the total momentum of the system will remains constant

so we will have

here we have

so the skater will move back with above speed

now the deceleration of the skater is due to friction given as

Answer:

(a) 3.553 m/s

(b) 21.46 m

Explanation:

(a) Applying the law of of momentum,

Total momentum before collision = Total momentum after collision

mu+m'u'  = mv+m'v'.................. Equation 1

Where m and m' are the mass of skater and stone respectively,  u and u' are the initial velocity of skater and stone respectively, v and v' are the final velocity of the skater and the stone respectively.

Note, u = 0 m/s, u' = 0 m/s

Therefore,

0 = mv+m'v'

-mv = m'v'................ Equation 2

make v the subject of the equation

v = -m'v'/m............. Equation 3

Given: m = 45 kg, m' = 7.65 kg, v' = 20.9 m/s

Substitute into equation 3

v = 7.65(20.9)/45

v = -3.553 m/s

Hence the speed of the skater = 3.553 m/s

(b) F = mgμ..............Equation 4

But F = ma

Therefore,

ma = mgμ

a = gμ............... Equation 5

Where a = acceleration of the skater, g = acceleration due to gravity, μ = coefficient of kinetic friction

Given: μ = 0.03, g = 9.8 m/s²

Substitute into equation 5

a = 0.03(9.8)

a = 0.294 m/s²

Using the equation of motion,

v² = u²+2as............. Equation 6

Where s = distance moved by the skater.

note that u = 0 m/s.

therefore,

v² = 2as

s = v²/2a................ Equation 7

Given: v = 3.553 m/s, a = 0.294

Substitute into equation 7

s = 3.553²/(2×0.294)

s = 12.62/0.588

s = 21.46 m

Answer:

The glider’s speed after the skydiver lets go is 26 m/s

Explanation:

To calculate the glider’s speed just after the skydiver lets go, we will need to use the conservation of momentum

Mathematically;

mv = mv + mv

so 680 * 26 = (680-60)v + 60 * 26

17680 = 620v + 1560

17680-1560 = 620v

16120 = 620v

v = 16120/620

v = 26 m/s

Answer:

F = 213.75 N

Explanation:

First we need to calculate the angular acceleration of merry-go-round. For that purpose we use 1st equation of motion in angular form.

ωf = ωi + αt

where,

ωf=final angular velocity=(5.5 rev/min)(2π rad/1 rev)(1 min/60 s)=0.58 rad/s

ωi =initial angular velocity = 0 rad/s

t = time = 12 s

α = angular acceleration = ?

Therefore,

0.58 rad/s = 0 rad/s + α(12 s)

α = (0.58 rad/s)/(12 s)

α = 0.05 rad/s²

Now, we shall find the linear acceleration of the merry-go-round:

a = rα

where,

a = linear acceleration = ?

r = radius = 4.5 m

Therefore,

a = (4.5 m)(0.05 rad/s²)

a = 0.225 m/s²

Now, the force is given by Newton;s 2nd Law:

F = ma

where,

F = Force = ?

m = mass pf merry-go-round = 950 kg

Therefore,

F = (950 kg)(0.225 m/s²)

F = 213.75 N

induced emf value is missing..

please correct the question

Answer:

A.ENERGY: Radio<microwaves<infrared<visible light<ultraviolet<xrays<gammarays

B. WAVELENGTH: Radio>microwaves> infrared>visible light>ultraviolet>xray> gammarays

C. FREQUENCY: Radio<microwaves<infrared<visible light<ultraviolet<xray< gammarays

Explanation:

THIS IS BECAUSE OF THE FOLLOWING EQUATIONS

1.ENERGY (E)= hX freqency

So as energy of radiation increases frequency also increases

2. Velocity (v) = wavelength x frequency

So as wavelength increases frequency decreases and vice versa

Answer:

the expression is False

Explanation:

From the kinematics equations we can find the speed of a body in a clean fall

        v = v₀ - g t

         v² = V₀² - 2 g y

If the body starts from rest, the initial speed is zero (vo = 0)

            v= √ (2g y)

In the first equation it gives us the relationship between speed and time.

With the second equation we can find the speed in which the distance works, this is the expression, see that speed is promotional at the height of a delicate body.

Therefore the expression is False

Answer:

Q = -3280J

Explanation:

From the First Law of Thermodynamics, energy cannot be created nor destroyed but it can be converted from one form to another with the interaction of heat. Mathematically, this can be expressed as:

ΔU = Q + W        ----------(i)

Where;

ΔU = total change in internal energy of a system.

Q = heat exchanged between the system and the surrounding

W = work done by or on the system.

If heat is lost into the surrounding, then Q = -ve, else Q = +ve

If work is done on the system, then W = -ve, else W = -ve

=> From the question, Rick is the system and does a work of

W = +1090J  [since Rick does the work, W = +ve]

=>Also, the internal energy decreases by 2190J, therefore,

ΔU = -2190J   [since there is a decrease in internal energy]

Substitute the values of W and ΔU into equation (i) as follows;

-2190 = Q + 1090

=> Q = -2190 - 1090

=> Q = -3280J

Therefore, the value of Q = -3280J

Answer:

The  total energy is  [tex]T = 169.02 \ J[/tex]

Explanation:

From the question we are told that

    The  Poynting vector (energy flux ) is  [tex]k = 0.939 \ W/m^2[/tex]

    The length of the rectangle is  [tex]l = 1.5 \ m[/tex]

    The  width of the rectangle is  [tex]w = 2.0 \ m[/tex]

    The time taken is [tex]t = 1 \ minute = 60 \ s[/tex]

The total electromagnetic energy falls on the area is mathematically represented as

      [tex]T = k * A * t[/tex]

Where A  is the area of the rectangle which is mathematically represented as

           [tex]A= l * w[/tex]

 substituting values

         [tex]A= 2 * 1.5[/tex]

        [tex]A= 3 \ m^2[/tex]

substituting values

        [tex]T = 0.939 * 3 * 60[/tex]

        [tex]T = 169.02 \ J[/tex]

Answer:

Maybe

Explanation:

Tbh it’s different for every women. Most women would say yes because having a bush is a bit disturbing for some and/or could be in return for a women shaving down there (if they do)

Answer:

The answer is 40 N for APX

Explanation:

..........................................................

The radiation pressure due to a bulb that emits 25 W of EM radiation at a distance of 6.5 cm from the center of the bulb and the light is completely absorbed is 1.5707x10⁻⁶ N/m².

Radiation pressure was defined as the mechanical pressure exerted upon any surface due to the exchange of momentum between the object and the electromagnetic field.

Radiation pressure always includes the Momentum of light or electromagnetic radiation of any wavelength that can be absorbed, reflected, or otherwise emitted by matter on any scale.

E.g: Black-body radiation

Given the values are,

Wattage of bulb = W = 25 W

distance = d = 6.5 cm = 0.065 m

To know the Radiation Pressure,

It can be given by

P = I/c

Where, c = 299792458 m/s is the speed of light,

I is the intensity of radiation and given by

I = W/4πd²

Where W is the Wattage of bulb and d is the distance

I = 25/4π*0.065²

I = 470.872 w/m²

so, the radiation pressure becomes

P = 470.872/299792458

P = 1.5707x10⁻⁶ N/m²

Therefore, the radiation pressure due to a 25 W bulb at a distance of 6.5 cm is 1.5707x10⁻⁶ N/m²

To know more about the radiation pressure,

https://brainly.com/question/23972862

#SPJ5

Answer:

the rate that the energy of a system is transformed

Explanation:

We can define energy as the capacity or ability to do work. Power is defined as the rate of doing work or the rate at which energy is transformed. It can also be regarded as the time rate of energy transfer. In older physics literature, power is sometimes referred to as activity.

Power is given by energy/time. Its unit is watt which is defined as joule per second. Another popular unit of power is horsepower. 1 horsepower = 746 watts.

Very large magnitude of power is measured in killowats and megawatts.

Answer:

  n = 2.0686

Explanation:

When an unpolarized ray of light is reflected on a surface, the reflected ray is partially polarized, complete polarization occurs when it is true that between the transmitted and reflected ray one has 90, the relationship is

        n = so tea

 let's calculate

        n = tan 64.2

        n = 2.0686

Answer:

The maximum  emf generated in the coil is 60527.49 V

Explanation:

Given;

area of coil, A = 0.320 m²

angular frequency, f = 100 rev/s

magnetic field, B = 0.43 T

number of turns, N = 700 turns

The maximum emf generated in the coil is calculated as,

E = NBAω

where;

ω is the angular speed = 2πf

E = NBA(2πf)

Substitute in the given values and solve for E

E = 700 x 0.43 x 0.32 x 2π x 100

E = 60527.49 V

Therefore, the maximum  emf generated in the coil is 60527.49 V

Answer:

Explanation:

According to first law of thermodynamics:

∆U= q + w

= 10kj+(-70kJ)

-60kJ

, w = + 70 kJ

(work done on the system is positive)

q = -10kJ ( heat is given out, so negative)

∆U = -10 + (+70) = +60 kJ

Thus, the internal energy of the system decreases by 60 kJ.