Why does LiH have the largest hydrogen? ( here's the image) http://imgur.com/a/dAVX7
A)A potential map marks the edges of the molecules electron cloud. The electron cloud is smallest around the H in LiH, because that H has less electrons around it than the Hs in the other molecules.
B)A potential map marks the edges of the molecules electron cloud. The electron cloud is smallest around the H in LiH, because that H has more electrons around it than the Hs in the other molecules.
C)A potential map marks the edges of the molecules electron cloud. The electron cloud is largest around the H in LiH, because that H has more electrons around it than the Hs in the other molecules.
D)A potential map marks the edges of the molecules electron cloud. The electron cloud is largest around the H in LiH, because that H has less electrons around it than the Hs in the other molecules.
Part B) Which compound has the hydrogen that would be most apt to attract a negatively charged molecule?
H2
LiH
HF

The substance described in the question is most likely a base or an alkali. Bases have a bitter taste, feel slippery or soapy to the touch, conduct electricity in solution, and have a pH above 7.

The slipperiness is due to the ability of bases to react with oils and fats to form soaps, which have a slippery texture.

The ability to conduct electricity is due to the presence of ions in the solution. In the case of bases, these are usually hydroxide ions (OH-) which can conduct electric current when dissolved in water.

The high pH is also characteristic of bases, as pH is a measure of the concentration of hydrogen ions (H+) in solution. In the case of bases, the concentration of OH- ions is higher than the concentration of H+ ions, leading to a pH above 7.

Examples of common bases include "sodium hydroxide (NaOH), potassium hydroxide (KOH), and calcium hydroxide (Ca(OH)2)".

to know more about alkali refer here:

https://brainly.com/question/30607576#

#SPJ11

Ionization energy for the neutral Li atom in its ground state is approximately 520.9 kJ/mol.

The energy required to remove an electron from an atom in its ground state is the ionization energy. In this problem, we are given the wavelengths of various transitions of neutral Li atoms. From these wavelengths, we can calculate the energy of each transition using the equation E=hc/λ,

where h is Planck's constant,

c is the speed of light

λ is the wavelength.

Using the given wavelengths, we can calculate the energy of each transition and determine the difference in energy between the ground state and the excited state. The ionization energy is the energy required to remove an electron from the ground state, which is equal to the energy difference between the ground state and the ionized state.

In this case, the transition from the ground-state configuration 1s²2s¹ to the 2P term occurs at 670.78 nm. From this, we can calculate the energy difference between the ground state and the 2P term. Then, by adding the energy differences between the 2P and 2D terms, and the 2D and 2S terms, we can calculate the ionization energy of the ground-state atom. As a result, when the temperature lowers to 8.5°C in the evening, the volume of the vessel is roughly 2.64 L.

To know more about the Ionization energy, here

https://brainly.com/question/13088843

#SPJ4

A brick with dimensions 1.00 m x 0.200 m x 0.500 m exerts different pressures on the floor when placed in different ways. The force exerted on the floor is 20.0 N.

To calculate the force exerted on the floor by the brick, we need to first calculate the area of the face of the brick that is in contact with the floor. The minimum pressure exerted by the brick on the floor is given as 100.0 Pa. Therefore, the force exerted on the floor by the brick can be calculated as:

Force = Pressure x Area

The area of the face of the brick in contact with the floor is given by 1.00 m x 0.200 m = 0.200 m². Therefore, the force exerted on the floor by the brick is:

Force = 100.0 Pa x 0.200 m² = 20.0 N

Since 20.0 N is not listed in the given options, it seems there may be an error or discrepancy in the provided answer choices.

To know more about the force exerted refer here :

https://brainly.com/question/18315231#

#SPJ11

The pressure will be 139.92 kPa at a volume of 27.5 mL.

To answer this question, we will use Boyle's Law formula, which states that the product of the initial pressure (P1) and volume (V1) of a gas is equal to the product of the final pressure (P2) and volume (V2) when the temperature remains constant.


Step 1: Identify the initial pressure (P1), initial volume (V1), and final volume (V2).

P1 = 102.3 kPa
V1 = 37.5 mL
V2 = 27.5 mL

Step 2: Apply Boyle's Law formula, which is P1 * V1 = P2 * V2. We need to find the final pressure (P2).

102.3 kPa * 37.5 mL = P2 * 27.5 mL

Step 3: Solve for P2.

P2 = (102.3 kPa * 37.5 mL) / 27.5 mL

Step 4: Calculate the value of P2.

P2 ≈ 139.64 kPa

At 27.5 mL, the pressure of the gas will be approximately 139.64 kPa.

Learn more about pressure at https://brainly.com/question/28012687

#SPJ11

The acid strength increases with increasing acidity, which is the tendency to donate a proton (H+). H2Te < H2Se < H2S

The acidity of an acid is related to its acid dissociation constant (Ka). The higher the Ka, the stronger the acid.

The Ka values for the given acids are:

H2S: Ka = [tex]9.0 × 10^-8[/tex]

H2Se: Ka = [tex]1.3 × 10^-8[/tex]

H2Te: Ka = [tex]3.3 × 10^-9[/tex]

Therefore, the order of increasing acid strength is:

H2Te < H2Se < H2S

This is because H2Te has the lowest Ka value, indicating that it is the weakest acid of the three. Conversely, H2S has the highest Ka value, indicating that it is the strongest acid of the three.

To know more about acid dissociation constant refer to-

https://brainly.com/question/31386094

#SPJ11

The primary alcohol required for the synthesis of heptanoic acid is heptanol, which has the chemical formula C₇H₁₆O. The aldehyde required for this synthesis is heptanal, which has the chemical formula C₇H₁₄O.

Heptanoic acid is a carboxylic acid with seven carbon atoms. It can be synthesized from primary alcohol and an aldehyde via oxidation.

To synthesize heptanoic acid, heptanol, and heptanal are reacted in the presence of an oxidizing agent, such as potassium permanganate (KMnO₄) or chromium trioxide (CrO₃). The oxidation of heptanol produces heptanal, which is further oxidized to heptanoic acid. The chemical equation for the synthesis of heptanoic acid is as follows:

C₇H₁₆O + O → C₇H₁₄O + H₂O

C₇H₁₄O + O → C₇H₁₂O₂ + H₂O

The resulting product, heptanoic acid, is a colorless liquid with a pungent odor and is commonly used as a flavoring agent and in the production of esters for fragrances and plastics.

To learn more about heptanoic follow the link:

brainly.com/question/30885566

#SPJ4

The correct answer is therefore A, -1.66 V.

The given information includes the standard reduction potential of the half-reaction:

Ag(aq) + e- → Ag(s) E° = +0.80 V

We can use this information along with the standard cell potential equation to find the standard reduction potential of the half-reaction:

E°cell = E°reduction + E°oxidation

where E°cell is the standard cell potential, E°reduction is the reduction potential for the half-reaction being reduced, and E°oxidation is the oxidation potential for the half-reaction being oxidized.

In this case, the two half-reactions involved are:

M3+(aq) + 3e- → M(s) (reduction)

3Ag(aq) → 3Ag+(aq) + 3e- (oxidation)

The reduction half-reaction needs to be flipped and its potential sign changed to obtain the oxidation potential:

M(s) → M3+(aq) + 3e- (oxidation)

The standard cell potential is the difference between the reduction and oxidation potentials:

E°cell = E°reduction + E°oxidation

E°cell = E°(M3+(aq) + 3e- → M(s)) + E°(M(s) → M3+(aq) + 3e-)

E°cell = E°(M(s) → M3+(aq) + 3e-) + (-E°(3Ag(aq) → 3Ag+(aq) + 3e-))

E°cell = E°(M(s) → M3+(aq) + 3e-) - E°(Ag(aq) → Ag(s))

E°cell = E°(M3+(aq) + 3e- → M(s)) - E°(Ag(aq) → Ag(s))

E°cell = -2.46 V - 0.80 V = -3.26 V

Therefore, the standard reduction potential for the half-reaction M3+(aq) + 3e- → M(s) is:

E°(M3+(aq) + 3e- → M(s)) = E°cell + E°(Ag(aq) → Ag(s))

E°(M3+(aq) + 3e- → M(s)) = -3.26 V + 0.80 V = -2.46 V

The correct answer is therefore A, -1.66 V.

learn more about reduction potential here

https://brainly.com/question/20040177

#SPJ1

Ans.1

blank 1 =1

blank 2 = 3

blank 3 = 2

Ans.2

blank 1 = 6

blank 2 = 4

blank 3 = 5

Ans.

blank 1 = 11

blank 2 =  7

blank 3 = 8

The mass of dissolved solids in 1 m³ of the water sample is 16 g.

To convert from cm³ to m³, we divide by 1,000,000 (10^6) since there are 1,000,000 cm³ in 1 m³.

First, we need to find the mass of dissolved solids in 1 cm³ of the water sample:

Next, we can find the mass of dissolved solids in 1 m³ of the water sample:

However, the answer should be given in standard form, so we convert 640 to scientific notation:

To learn more about mass of dissolved solids, here

https://brainly.com/question/14906002

#SPJ4

Answer:

1000m/s^2

Explanation:

since F=ma

:a=m/F

Yo convert ur m from kg to g

20×1000

20000

a=20000\20

a=1000m/s^2

Milk is commonly packaged in different types of containers, such as cartons, plastic bottles, and glass bottles. Each packaging type has its physical and chemical properties, which can affect the quality, shelf-life, and safety of the product.

Cartons are commonly used for shelf-stable milk products, such as UHT (ultra-high temperature) milk, and are made of paperboard, plastic, and aluminum layers. These materials provide a barrier against light, oxygen, and moisture, which helps to preserve the milk's freshness and flavor. Moreover, cartons are lightweight and stackable, which makes them easy to store and transport.

Plastic bottles are widely used for packaging fresh milk, and the choice of plastic depends on the application. For example, high-density polyethylene (HDPE) is commonly used for milk jugs due to its high strength and stiffness, while low-density polyethylene (LDPE) is used for milk bags due to its flexibility and durability.

Plastic bottles are lightweight, shatter-resistant, and provide a good barrier against oxygen and water vapor.

Glass bottles are another popular choice for milk packaging, and they provide an airtight and inert container for milk. Glass is impermeable to gases and does not interact chemically with the milk, which helps to maintain the milk's freshness and flavor.

However, glass is relatively heavy, fragile, and requires more energy to manufacture and transport compared to other packaging materials.

The choice of packaging material depends on various factors, such as the product's properties, manufacturing cost, consumer preference, and environmental impact. The reactivity of a material depends on its position in the periodic table, with metals being more reactive than nonmetals.

Aluminum is a highly reactive metal, but it forms a protective oxide layer that prevents further reaction with the environment. Therefore, it is commonly used for making cooking utensils as it is lightweight, durable, and has good thermal conductivity.

The packaging plays an essential role in protecting the product from contamination, physical damage, and deterioration. The use of improper packaging materials or techniques can lead to the growth of microorganisms, loss of nutrients, off-flavors, and potential health hazards.

For example, the migration of harmful chemicals from plastic packaging into food can cause health problems such as endocrine disruption, cancer, and reproductive disorders.

To know more about chemical properties refer to-

https://brainly.com/question/1935242

#SPJ11

It is not enough to just know the mass of each reactant to determine the limiting reagent in a chemical reaction. The limiting reagent is the reactant that gets completely consumed during a chemical reaction, which limits the amount of product that can be formed.

To determine the limiting reagent, you need to compare the amount (in moles) of each reactant present, rather than just the mass. This is because different reactants have different molar masses, and therefore the same mass of two different reactants would have different numbers of moles.

Once you have determined the amount (in moles) of each reactant present, you can use stoichiometry to calculate how much product can be formed from each reactant. The reactant that produces the smallest amount of product is the limiting reagent.

To know more about the Reaction, here

https://brainly.com/question/30324543

#SPJ1

The Michaelis-Menten equation is used to describe the relationship between the rate of an enzymatic reaction and the substrate concentration. The equation is as follows:

v = (Vmax [S]) / (Km + [S])

where v is the initial velocity of the reaction, Vmax is the maximum velocity of the reaction, [S] is the substrate concentration, and Km is the Michaelis constant.

Km represents the substrate concentration at which the enzyme reaction rate is half of its maximum rate (Vmax). It is a measure of the affinity of the enzyme for its substrate. The units of Km depend on the units used for [S] and Vmax in the equation.

In the given scenario, V (initial) = 0.5 (Vmax), which means the initial reaction rate is half of the maximum reaction rate. Therefore, the substrate concentration at this point is equal to Km. As Km is a measure of substrate concentration, its units will be the same as the units of the substrate concentration, which can vary depending on the context.

Visit here to learn more about Michaelis-Menten equation brainly.com/question/30756012

#SPJ11

Hi! Element "t" does not exist in the periodic table.  

The known chemical elements are listed in the periodic chart in increasing atomic number order. Elements that have comparable chemical and physical properties are grouped together in columns referred to as "groups" in the table's rows and columns. The periodic table has 18 groups, numbered from 1 to 18.

In chemical equations and formulas, each element in the periodic table is represented by a distinct symbol made up of one or two letters. For instance, the letters "H" and "He" stand for hydrogen, "C" stands for carbon, and so on.

If you could provide me with more information about the element you are referring to, such as its full name or its atomic number, I would be happy to help you locate it on the periodic table and tell you which group it belongs to.

To know more about the periodic table, click here;

https://brainly.com/question/31672126

#SPJ11

we need 5.65 mL of a 6.00 M HCl solution to react with excess Fe2O3 to produce 16.5 g of FeCl3.

The balanced chemical equation for the reaction between Fe2O3 and HCl is:

Fe2O3 + 6 HCl → 2 FeCl3 + 3 H2O

We can use the given mass of FeCl3 to calculate the number of moles of FeCl3 produced:

mass of FeCl3 = 16.5 g
molar mass of FeCl3 = 162.2 g/mol
moles of FeCl3 = mass/molar mass = 16.5 g / 162.2 g/mol = 0.1017 mol

From the balanced chemical equation, we see that the stoichiometry between HCl and FeCl3 is 6:2, which simplifies to 3:1:

3 HCl → 1 FeCl3

Therefore, we need one-third as many moles of HCl as moles of FeCl3:

moles of HCl = 1/3 × moles of FeCl3 = 0.0339 mol

Now we can use the definition of molarity to calculate the volume of 6.00 M HCl solution needed:

moles of HCl = M × V
V = moles of HCl / M

V = 0.0339 mol / 6.00 mol/L = 0.00565 L

Finally, we can convert the volume to milliliters:

0.00565 L × 1000 mL/L = 5.65 mL

Therefore, we need 5.65 mL of a 6.00 M HCl solution to react with excess Fe2O3 to produce 16.5 g of FeCl3.
Visit to know more about HCl solution:-

https://brainly.com/question/27576431

#SPJ11

Yes, two magnets can create magnetic force fields that allows them to interact without touching.

Magnetic forces are non contact forces; they pull or push on objects without touching them. Magnets are only attracted to a few 'magnetic' metals and not all matter. Yes, the investigation did answer the question about whether two magnets create magnetic force fields that allow them to interact without touching.

The investigation provided enough evidence to support the idea that invisible magnetic force fields exist:

The investigation involved observing how two magnets interact with each other without touching. The magnets were brought closer together until they interacted, and then they were moved further apart. This process was repeated several times, and the results were observed and recorded. During the investigation, it was observed that the magnets interacted with each other even when they were not touching. This interaction occurred because the magnets created magnetic force fields that allowed them to interact with each other even when they were not in direct contact. This is because the interaction between the magnets could not be explained by any other means except through the existence of magnetic force fields.

To know more about magnetic force here

https://brainly.com/question/27949286

#SPJ4

From the calculations, we can see that the mass of the acetic acid that is produced is 28.2 g.

In a chemical reaction involving two or more reactants, the limiting reactant is the reactant that is consumed completely, thereby limiting the amount of product that can be formed. The other reactant(s) that remain after the limiting reactant is completely consumed are called excess reactants.

Number of moles of CH3CHO = 20.8g/44 g/mol

= 0.47 moles

Number of moles of O2 = 14.5 g/32 g/mol

= 0.45 moles

If 2 moles of CH3CHO reacts with 1 mole of O2

0.47 moles of CH3CHO would react with 0.47 * 1/2

= 0.24 moles

Thus CH3CHO is the limiting reactant

Mass of the acetic acid produced = 0.47 moles * 60 g/mol

= 28.2 g

Learn more about acetic acid:https://brainly.com/question/15202177

#SPJ1

Answer:

yes

Explanation:

yes, avalanches a big part in the shaping of the earths surface.

Yes, avalanches can play a significant role in shaping the Earth's surface, particularly in mountainous areas.

The movements of snow, ice, and debris down a slope known as avalanches can significantly impact the Earth's surface, especially in mountainous regions. These natural occurrences can cause various landscape changes, erosion, and deposition.

DNA analysis has revolutionized forensic science in the past few decades. It has become an indispensable tool for crime scene investigations, identifying suspects, and exonerating the innocent.

The history of DNA analysis dates back to 1984, when British geneticist Alec Jeffreys developed the technique of DNA fingerprinting. He used variable number tandem repeats (VNTRs) to create a unique DNA profile for each individual.

In 1986, DNA analysis was first used in a cri-minal case, where it was used to exonerate a man who had been wrongly convicted of ra-pe and mu-rder. Since then, DNA analysis has been used in several high-profile cases, such as the OJ Simpson trial in 1995 and the identification of 9/11 victims in 2001.

The technique of DNA fingerprinting evolved over the years, with the development of polymerase chain reaction (PCR) and short tandem repeats (STRs) in the 1990s. PCR enabled amplification of DNA samples, while STRs provided greater discrimination power in creating unique DNA profiles.

The first DNA database was established in the UK in 1995, followed by the US in 1998. Today, DNA databases are used worldwide for identifying suspects and matching DNA samples to cri-me scenes.

The latest advancements in DNA analysis include next-generation sequencing (NGS), which can analyze entire genomes, and mitochondrial DNA analysis, which can identify maternal lineage.

In conclusion, DNA analysis has come a long way since its inception in the 1980s. It has become an essential tool for forensic investigations and has contributed significantly to the justice system. The technique continues to evolve, and future advancements in DNA analysis will undoubtedly improve its effectiveness and accuracy.

To know more about DNA analysis, visit:

https://brainly.com/question/19340987#

#SPJ11

To determine the number of carbon atoms in 0.008 moles of C3H7OH, we first need to find the molar mass of the compound.

The molar mass of C3H7OH can be calculated by adding the atomic masses of all the atoms in the molecule:

3(12.011) + 8(1.008) + 1(15.999) = 60.096 g/mol

This means that 1 mole of C3H7OH has a mass of 60.096 g.

To calculate the number of moles of carbon atoms in 0.008 moles of C3H7OH, we need to multiply the number of moles of C3H7OH by the number of carbon atoms in one mole of C3H7OH.

One mole of C3H7OH contains 3 carbon atoms, so 0.008 moles of C3H7OH contains:

0.008 moles x 3 = 0.024 moles of carbon atoms

Finally, we can convert moles of carbon atoms to the number of carbon atoms using Avogadro's number, which is 6.022 x 10^23 atoms per mole:

0.024 moles x 6.022 x 10^23 atoms/mole = 1.445 x 10^22 atoms of carbon

Therefore, 0.008 moles of C3H7OH contains 1.445 x 10^22 atoms of carbon.

To learn more about propanol, click here:  https://brainly.com/question/30909638

#SPJ11

Answer: B. Energy

Explanation: The matter is converted into energy, which is released in the form of radiation, this is due to the fact that the mass of the products of the reaction is less than the mass of the reactants, and this difference in mass is converted into energy. Aka ([tex]E=mc^{2}[/tex]).

Baking soda is actually a compound known as sodium bicarbonate, which is water-soluble. Sugar, on the other hand, is also soluble in water and other liquids that contain water.

This means that it dissolves in water and can also dissolve in other liquids that contain water, such as soda. Therefore, baking soda is indeed soluble in soda.

Sugar, on the other hand, is also soluble in water and other liquids that contain water. This includes soda, which is a carbonated beverage that typically contains a high amount of dissolved sugar.

However, the solubility of sugar in soda can depend on various factors such as the temperature of the soda, the amount of sugar present, and the type of sugar used.

In general, both baking soda and sugar are soluble in soda and can dissolve to some extent. However, the exact degree of solubility can vary depending on various factors. It is worth noting that excessive consumption of sugary soda can have negative impacts on health, so it is important to consume such beverages in moderation.

To know more about sodium bicarbonate, visit:

https://brainly.com/question/8560563#

#SPJ11

The value of costant K at 234 K is 0.13.

What is the costant (K)?

To solve this problem, we can use the van 't Hoff equation:

ln(K2/K1) = -(ΔH°/R) * (1/T2 - 1/T1)

where K1 is the equilibrium constant at temperature T1, K2 is the equilibrium constant at temperature T2, ΔH° is the standard enthalpy change for the reaction, R is the gas constant, and T is the temperature in Kelvin.

We can rearrange this equation to solve for K2:

K2 = K1 * [tex]e^{(-(ΔH°/R)}[/tex] * (1/T2 - 1/T1))

Plugging in the given values, we get:

K1 = 10.5

T1 = 350 K

T2 = 234 K

ΔH° = -18.8 kJ/mol (be careful with the units!)

R = 8.314 J/(mol*K)

K2 = 10.5 * [tex]e^{(-(-18.810^3 J/mol)/(8.314 J/(molK)) * (1/234 K - 1/350 K))}[/tex]

K2 = 0.13

Therefore, the value of K at 234 K is 0.13.

What is equilibrium constant?

Equilibrium constant (K) is a thermodynamic constant that describes the ratio of the concentrations or pressures of reactants and products in a chemical reaction that has reached equilibrium at a given temperature and pressure. The value of K provides important information about the position of equilibrium and the relative amounts of reactants and products at equilibrium. If K is greater than 1, the reaction favors the products at equilibrium, whereas if K is less than 1, the reaction favors the reactants at equilibrium. If K is equal to 1, the reaction is at equilibrium and the concentrations or pressures of the reactants and products are equal.

To know more about equilibrium constant, visit:

https://brainly.com/question/14932239

#SPJ9

The molar mass of [tex]CHOCH[/tex] is 64.05 g/mol, which means that one mole of [tex]CHOCH[/tex] has a mass of 64.05 grams.

The molar mass of a compound is the mass in grams of one mole of the substance. To calculate the molar mass of [tex]CHOCH[/tex], we need to determine the atomic masses of all the atoms in one molecule of the compound and add them together.

[tex]CHOCH[/tex] has one carbon (C) atom, three oxygen (O) atoms, and four hydrogen (H) atoms. The atomic mass of C is 12.01 g/mol, O is 16.00 g/mol, and H is 1.01 g/mol. Therefore, we can calculate the molar mass of [tex]CHOCH[/tex] as follows:

Molar mass = (1 x atomic mass of C) + (3 x atomic mass of O) + (4 x atomic mass of H)

Molar mass = (1 x 12.01) + (3 x 16.00) + (4 x 1.01)

Molar mass = 64.05 g/mol

Therefore, the molar mass of [tex]CHOCH[/tex] is 64.05 g/mol, which means that one mole of [tex]CHOCH[/tex] has a mass of 64.05 grams.

To know more about molar mass refer to-

https://brainly.com/question/22997914

#SPJ11

B. Zn (s) + H2SO4 (aq) ZnSO4 (aq) + H2 (l) of the following chemical reactions is a single replacement reaction

A single-displacement reaction occurs when a more reactive ingredient in a compound replaces a less reactive member. Metal displacement, hydrogen displacement, and halogen displacement are the three different categories of displacement processes.

Chlorine takes the place of bromine when it is introduced to a solution of sodium bromide in gaseous form (or as a gas dissolved in water). Chlorine, which is more reactive than bromine, causes sodium bromide to lose bromine, which causes the solutions to become blue.

learn more about single-displacement

https://brainly.com/question/7959057

#SPJ1

The solubility of the magnesium fluoride, MgF₂, in the water is 1.5 × 10⁻² g/l. The solubility  of magnesium fluoride in 0.13 M of the sodium fluoride, NaF is 0.88 M.

The solubility, Ksp = 1.5 × 10⁻² g/L

The concentration , NaF = 0.13 M

The solubility of the magnesium fluoride that is MgF₂ is expressed as :

The solubility of the magnesium fluoride = Ksp / NaF²

The solubility of the magnesium fluoride = 1.5 × 10⁻² / (0.13 )²

The solubility of the magnesium fluoride = 0.88 M

Therefore, the solubility of the magnesium fluoride  in 0.13 M of the sodium fluoride is 0.88 M.

To learn more about solubility here

https://brainly.com/question/14524193

#SPJ4

The pH of the buffered solution is 4.374.

A buffered solution is a solution that resists changes in pH when small amounts of acid or base are added to it.

In order to calculate the pH of a buffered solution, we need to use the Henderson-Hasselbalch equation, which is pH = pKa + log([A-]/[HA]). In this equation, pKa is the dissociation constant of the weak acid (benzoic acid in this case), [A-] is the concentration of the conjugate base (sodium benzoate), and [HA] is the concentration of the weak acid.

First, we need to find the concentrations of benzoic acid and sodium benzoate in the solution. We can use the equation n = cV, where n is the number of moles, c is the concentration, and V is the volume.

For benzoic acid:
n = (21.5 g / 122.12 g/mol) = 0.176 mol
c = 0.176 mol / 0.2 L = 0.88 M
[HA] = 0.88 M

For sodium benzoate:
n = (37.7 g / 144.11 g/mol) = 0.262 mol
c = 0.262 mol / 0.2 L = 1.31 M
[A-] = 1.31 M

Next, we need to find the pKa of benzoic acid. The pKa of benzoic acid is 4.20.

Now we can plug in the values into the Henderson-Hasselbalch equation:
pH = 4.20 + log([1.31]/[0.88])
pH = 4.20 + log(1.49)
pH = 4.20 + 0.174
pH = 4.374

Therefore, the pH of the buffered solution is 4.374.

To know more about pH, visit:

https://brainly.com/question/15289741#

#SPJ11

Answer: polypeptide chain

Explanation:

The percent yield for the given reaction is 85.29%.

The percent yield for this reaction can be calculated using the formula:

percent yield = (actual yield / theoretical yield) x 100

The theoretical yield can be calculated based on the stoichiometry of the reaction. From the equation given, we know that 1 mole of (E)-stilbene reacts with 1 mole of pyridinium bromide perbromide to produce 1 mole of meso-stilbene dibromide.

First, let's calculate the number of moles of (E)-stilbene:

213 mg (E)-stilbene x 1 g/1000 mg x 1 mol/180.25 g = 0.00118 mol (E)-stilbene

Next, let's calculate the number of moles of pyridinium bromide perbromide:

435 mg pyridinium bromide perbromide x 1 g/1000 mg x 1 mol/319.82 g = 0.00136 mol pyridinium bromide perbromide

Since the stoichiometry is 1:1, the number of moles of meso-stilbene dibromide produced is also 0.00118 mol.

Finally, let's calculate the theoretical yield in grams:

theoretical yield = 0.00118 mol x 340.05 g/mol = 0.401 g

Now we can calculate the percent yield:

percent yield = (0.342 mg / 0.401 g) x 100 = 85.29%

Therefore, the percent yield for this reaction is 85.29%.

Learn more about percent yield at https://brainly.com/question/14714924

#SPJ11

The standard deviation for Zn is 0.05528%, and for Sn is 0.000336%. The coefficients of variation are 0.1658% for Zn and 1.379% for Sn.

To calculate the standard deviation and coefficient of variation, we need to first find the mean and variance of the data.

For Zn;

Mean = (33.27 + 33.37 + 33.34) / 3 = 33.3267%

Variance = [(33.27 - 33.3267)² + (33.37 - 33.3267)² + (33.34 - 33.3267)²] / 2

= 0.00305627

For Sn;

Mean =(0.022 + 0.025 + 0.026) / 3

= 0.0243%

Variance = [(0.022 - 0.0243)² + (0.025 - 0.0243)² + (0.026 - 0.0243)²] / 2

= 1.13E-07

Now we calculate the standard deviation and coefficient of variation;

Standard deviation (Zn) = √(0.00305627)

= 0.05528%

Standard deviation (Sn) = √(1.13E-07)

= 0.000336%

Coefficient of variation (Zn) = (0.05528 / 33.3267) x 100%

= 0.1658%

Coefficient of variation (Sn) = (0.000336 / 0.0243) x 100%

= 1.379%

Therefore, the standard deviation for Zn and Sn is 0.05528% and 0.000336%. The coefficients of variation for Zn and Sn is  0.1658% and  1.379%.

To know more about coefficient of variation here

https://brainly.com/question/13293164

#SPJ4