What would be its orbital velocity if Ingenuity is on the surface of Mars?
For the answer, type in your answer (in standard notation, not scientific
notation). Do not write units.
Include two numbers after the decimal (the hundredths place).
Answers
The orbital velocity, if Ingenuity is on the surface of Mars is 3549.67 m/s
What is Orbital Velocity ?Orbital velocity is also called as critical velocity. It is minimum velocity must be given to the satellite or the body, so that it can revolve around the planet. i.e. orbital velocity is minimum velocity of body to revolve in stable orbit around a planet.
Orbital velocity is given by,
[tex]v_{c} =\sqrt{\frac{GM}{R+h}}[/tex] where G = Gravitational constant (6.673×10⁻¹¹ Nm²/kg²)
M = Mass of the planet
R = Radius of the planet
h = height of the object(satellite)
Orbital velocity depends on mass of the planet, radius of the planet and height of the object(satellite). It is independent of mass of the body(satellite).
Given,
M = 6.42×10²³ kg
R= 3.4×10⁶ m
h= 0 m (our body is on surface of the mars so)
Putting these values in the equation.
[tex]v_{c} =\sqrt{\frac{GM}{R}}[/tex] = [tex]\sqrt{\frac{(6.673*10^{-11}) (6.42*10^{23}) }{3.4*10^{6}}}[/tex]
[tex]V_{c}[/tex]= 3549.67 m/s
Hence Orbital velocity of Ingenuity on the surface of Mars 3549.67 m/s
To know more about orbital velocity, click:
https://brainly.com/question/15886625
#SPJ1
Related Questions
A 1,400-kilogram car is also traveling in a straight line. Its momentum is equal to that of the truck in the previous question. What is the velocity of the car?
Answers
The velocity of the car is v = 28.6 m/s.
Solution:
v = p/m
v = 40,000 kg x m/s
1,400 kg
v = 28.6 m/s
Average velocity is a measure of total displacement divided by total time. The total displacement is the distance between the start and endpoints. Since the car moves from point A at both the start and end points the total displacement is zero and the average velocity is also zero.
Velocity is the distance traveled per unit of time, the speed of movement. The speed of a car traveling on a smooth, flat section of a highway without traffic congestion is constant and not zero. Acceleration is the rate of change of velocity. The reason is simple. Velocity is the percentage of time an object moves along a path and Velocity is the speed and direction of an object's movement.
Learn more about Velocity here:
https://brainly.com/question/25749514
What is the rate law for the reaction a → b if the rate constant, k, is 0. 25 m⁻¹ s⁻¹ at 75 °c?
Answers
If the rate constant, k, for the reaction A + B is 0.25 M-1 s-1 at 75 °C, Which of the following claims is true in light of the rate law, rate = k[A]2[B] The rate law for a reaction is Rate = (1.25 M2s1)[A][B]2.
rate=k[A]m[B]n[C]p…
In which k is the rate constant, which is unique to a certain reaction at a specific temperature, and [A], [B], and [C] indicate the molar concentrations of reactants. M, N, and P are typically positive integer exponents (although it is possible for them to be fractions or negative numbers).
The rate of a reaction must be tracked experimentally when the reactant concentrations are varied in order to calculate the rate constant k and the exponents m, n, and p. The rate constant k varies with temperature and surface area but is independent of the concentration of A, B, or C.
Learn more about rate law here:
brainly.com/question/30379408
For a reaction, a → b, the rate law for the reaction is (0.25) [A] with the rate constant,k is 0.25 m⁻¹ s⁻¹.
What is rate law?The rate of the reaction defines the reactant concentration. It gives the relation between reactant and product. It gives the concentration of the reactant involved in the reaction.
The rate law is directly proportional to the rate constant of the reaction. The rate constant (k) gives the relation between the molar concentration of the reactant and the rate of the reaction.
The rate law is defined as, R= k [A]ᵃ[B]ᵇ, where R represents the rate law, k represents the rate constant, and [A], [B] represents the concentration of the reactant. a,b represents the order of reaction with respect to A and B.
From the given,
The rate law,
R= k [A]
= 0.25 [A]
Thus, the rate law of the reaction is 0.25[A].
To learn more about the rate law of the reaction :
https://brainly.com/question/31365410
#SPJ2
How is Schwartz's behavior of saying "uncle" beign negatively reinforcement
Answers
Answer:
is being negatively reinforced. The unpleasant stimulus that Schwartz is experiencing is the electric shock, and by yelling "Uncle!" he is reducing that stimulation and making himself feel better. As a result, he is receiving unfavorable reinforcement for his behavior.
Explanation:
Two inflated balloons are of identical size and shape, but one is filled with hydrogen, the other helium. Which has the larger buoyant force on it?
Answers
Buoyancy is the upward force wielded on an object that's wholly or incompletely immersed in a liquid. Also, the buoyancy forces of the two balloons don't have to be the same
Buoyancy doesn't depend on the substance present in the body. thus, both balloons will witness the same lift forces.
balloons float because the air pushes them. But the air does not know what is in the ball.
presses on everything unevenly, so the buoyant force is the same for all balloons of the same size. where ρ is the thickness of the air, g is the acceleration due to graveness, and V is the volume of the balloon.
Buoyancy or buoyancy is the upward force wielded by a liquid opposing the weight of a incompletely or completely submerged object. In a column of liquid, the pressure increases with depth due to the weight of the liquid over.
To know more about Buoyant force,
brainly.com/question/28239922
#SPJ4
Part A Assume the elevator is at rest: Rank the magnitude of the forces. Rank from largest to smallest: To rank items as equivalent; overlap them. View Available Hint(s) Reset Help Fon 2 by 3 Fon 3 by 2 Fon 1 by 3 Fon 3 by Fon 1 by 2 Fon 2 by Fon floor by Fon by floor largest smallest The cnrrect rAnking cAnnnt he determined Submit Previous Answers
Answers
Rank from largest to smallest for an elevator at rest is:
Fon floor by 1Fon 3 by 1Fon 2 by 3Fon 3 by 2Fon 2 by 1Fon 1 by 3Fon 1 by 2Fon 1 by floorHow to determine the rank of force magnitude?Assuming that "Fon" refers to the force applied on the elevator by different objects, the ranking of the forces from largest to smallest would be:
Fon floor by 1 (This is the weight of the elevator and is equal to the force applied by the floor on the elevator.)
Fon 3 by 1 (This is the force applied by an object outside the elevator, which could be a person or an object pushing or leaning against the elevator wall.)
Fon 2 by 3 (This is the force applied by an object inside the elevator on the back wall of the elevator.)
Fon 3 by 2 (This is the force applied by an object inside the elevator on the side wall of the elevator.)
Fon 2 by 1 (This is the force applied by an object inside the elevator on the front wall of the elevator.)
Fon 1 by 3 (This is the force applied by an object inside the elevator on the right wall of the elevator.)
Fon 1 by 2 (This is the force applied by an object inside the elevator on the left wall of the elevator.)
Fon 1 by floor (This is the force applied by the elevator on the floor and is equal in magnitude and opposite in direction to Fon floor by 1.)
Note that the weight of the elevator (Fon floor by 1) is by far the largest force acting on the elevator when it is at rest, and all other forces are much smaller in magnitude.
Learn more on force magnitude here: https://brainly.com/question/30015989
#SPJ1
Which data set, a or b , is for the uniform line of charge and which set is for the uniformly charged sphere? select the correct answer and explanation
Answers
Data set A corresponds to the uniform line of charge and data set B corresponds to the uniformly charged sphere ar e correct . So, option A is the correct answer.
Data set A corresponds to the uniform line of charge because it shows a linear relationship between the electric field strength and the distance from the center of the object. This is characteristic of a uniform line of charge, where the electric field strength is directly proportional to the distance from the center of the line.
Data set B corresponds to the uniformly charged sphere because it shows a non-linear relationship between the electric field strength and the distance from the center of the object. This is characteristic of a uniformly charged sphere, where the electric field strength decreases as the distance from the center of the sphere increases.
Therefore, as per the above explanaions, option A is correct.
Learn more about electric field :
https://brainly.com/question/28561944
#SPJ4
The question is :
Which of the following options correctly identifies which data set corresponds to the uniform line of charge and which one corresponds to the uniformly charged sphere, and provides an explanation for the answer?
A) Data set A corresponds to the uniform line of charge because it shows a linear relationship between the electric field strength and the distance from the center of the object, while data set B corresponds to the uniformly charged sphere because it shows a non-linear relationship between the electric field strength and the distance from the center of the object.
B) Data set A corresponds to the uniformly charged sphere because it shows a non-linear relationship between the electric field strength and the distance from the center of the object, while data set B corresponds to the uniform line of charge because it shows a linear relationship between the electric field strength and the distance from the center of the object.
C) Both data sets correspond to the uniformly charged sphere because they both show a non-linear relationship between the electric field strength and the distance from the center of the object.
D) Both data sets correspond to the uniform line of charge because they both show a linear relationship between the electric field strength and the distance from the center of the object.
Not having to worry about your health, job, or being attacked are related to this level
of needs.
Answers
Answer:
This level of needs is known as safety needs. Safety needs are the need for security, stability, and protection from physical and emotional harm. These needs include physical safety, financial security, health and well-being, and protection from discrimination and harassment.
Explanation:
Sergio is performing 30 joules of work by pushing an object 25 meters. How much force did he put on the object?
Answers
Sergio put a force of 1.2 newtons on the object to perform 30 joules of work by pushing it 25
What is force?
Force is a physical quantity that describes the interaction between two objects, causing a change in their motion. It is measured in units of newtons (N) and is defined as the product of an object's mass and acceleration, as described by Newton's second law of motion.
The force exerted by Sergio on the object can be calculated using the formula:
Work = Force × Distance × cos(theta)
where Work is the work done (in joules), Force is the force applied (in newtons), Distance is the distance moved (in meters), and cos(theta) is the cosine of the angle between the force and the direction of motion (assuming the force is applied parallel to the direction of motion, cos(theta) = 1).
Rearranging the formula, we get:
Force = Work / (Distance × cos(theta))
Substituting the given values, we get:
Force = 30 J / (25 m × cos(0°))
Since cos(0°) = 1, we can simplify the expression to:
Force = 30 J / 25 m
Force = 1.2 N
Therefore, Sergio put a force of 1.2 newtons on the object to perform 30 joules of work by pushing it 25
To know more about Force visit :-
https://brainly.com/question/12785175
#SPJ9
Dotermine how much elastic potential energy a spring has stored in it it the
spring constant is 50 M/m and the spring is stretched a distance of 2 m
Answers
Answer:
The elastic potential energy (U) stored in a spring is given by the formula:
U = (1/2)kx²
where k is the spring constant and x is the displacement from the equilibrium position.
In this case, k = 50 M/m (assuming M/m represents the unit of the spring constant) and x = 2 m. Substituting these values into the formula, we get:
U = (1/2)(50 M/m)(2 m)²
= (1/2)(50 M/m)(4 m²)
= 100 M
Therefore, the spring has 100 M (units of energy) of elastic potential energy stored in it when it is stretched a distance of 2 m.
Explanation:
Can someone help please
Answers
Answer:
D . All of the above
i hope you understand
Determine how much gravitational potential energy a 0.5 kg ball has if it is lifted
to a height of 2 m above Earth's surface.
Answers
Answer:
PE = 9.8 J
Explanation:
PE = mgh
PE = (0.5 kg) x (9.8 m/s^2) x (2 m)
PE = 9.8 J
What is the frequency of a wave that has a speed of 240 m/s and a wavelength of 0.20 m?
Answers
Answer:
Frequency of the wave = 1200 HertzExplanation:
Given :-
Wavelength = 0.20 m Wave speed = 240 m/sSolution :-
Frequency of a wave is given by :
[tex]\sf F = \dfrac{v}{\lambda} [/tex]where,
F is frequency,v is wavespeed ,[tex]\sf\lambda[/tex] is wavelengthOn substituting the values we get :
[tex]\dashrightarrow \sf F = \dfrac{240}{0.20} \\ \\ \dashrightarrow \rm F = 1200 \: Hz \\[/tex]
Hence, Frequency of the wave is 1200 HertzWhen two materials that are in contact have the same temperature, the materials are said to be in thermal
Answers
When two materials that are in contact have the same temperature, the materials are said to be in thermal equilibrium.
Thermal equilibrium is a state in which there is no net flow of heat between two objects in contact. In this state, the temperature of the objects does not change over time, as there is no temperature gradient between them. This is a fundamental principle of thermodynamics, and it is the basis for the design and operation of many thermal systems.
The concept of thermal equilibrium is also important in fields such as materials science, engineering, and physics, where it is used to describe the behavior of materials and their interactions with the environment.
To know more about temperature, here
brainly.com/question/15094067
#SPJ4
--The complete question is, When two materials that are in contact have the same temperature, the materials are said to be in ______.--
Which of the following accurately describes the energy stored on a parallel plate capacitor?A) The energy is inversely proportional to the charge stored on the capacitor.
B) The energy is directly proportional to the potential across the capacitor.
C) The energy is directly proportional to the capacitance of the capacitor.
F) The energy in proportional to the square the charge stored on the capacitor.
Answers
The energy is directly proportional to the capacitance of the capacitor, accurately describes the energy stored on a parallel plate capacitor.
What is capacitor?
A capacitor is an electronic component that stores electrical energy in an electric field. It consists of two conductive plates separated by an insulating material known as a dielectric. When a voltage is applied across the plates, it creates an electric field between them, which causes opposite charges to accumulate on the plates. The amount of charge that a capacitor can store is determined by its capacitance, which is a measure of the capacitor's ability to store charge for a given voltage. Capacitors are used in a variety of electronic circuits to filter out unwanted frequencies, smooth out power supplies, and store electrical energy for later use. They come in many different sizes and shapes, including ceramic, electrolytic, and tantalum capacitors.C) The energy is directly proportional to the capacitance of the capacitor.
The energy stored on a parallel plate capacitor is given by the formula:
E = 1/2 * C * V^2
where E is the energy stored, C is the capacitance of the capacitor, and V is the potential difference across the capacitor.
This formula shows that the energy stored on a parallel plate capacitor is directly proportional to the capacitance of the capacitor. Therefore, option C accurately describes the energy stored on a parallel plate capacitor.
Option A is incorrect because the energy stored is directly proportional to the potential difference across the capacitor, not inversely proportional to the charge stored.
Option B is incorrect because although the energy stored is related to the potential difference across the capacitor, it is not directly proportional to it.
Option F is also incorrect because the energy stored is proportional to the square of the potential difference across the capacitor, not the square of the charge stored.
Learn more about capacitor click here:
https://brainly.com/question/30529897
#SPJ1
Can you please help me with this question?
Answers
The impedance is 17587 ohm
The current is 0.00085 A
What is the impedance?Impedance is a measure of the opposition that an electrical circuit or component offers to the flow of an alternating current (AC) at a specific frequency. It is similar to resistance, which is the opposition offered to the flow of a direct current (DC). However, impedance takes into account not only the resistance but also the capacitance and inductance of the circuit or component.
The Capacitive reactance is;
1/2πfC
= 1/2 * 3.142 * 500 * 0.022 * 10^-6
= 14467 ohms
Then the impedance is;
Z = √(10000)^2 + (14467 )^2
Z = 17587 ohm
The current = Vrms/Z
= 15 V/ 17587 ohm
= 0.00085 A
Learn more about impedance:https://brainly.com/question/30040649
#SPJ1
A wheel rolls a distance of 24 meters and rotates through an angle of 12 radians. What is the radius of the wheel?
Answers
A circular wheel has a radius of 24 cm, a diameter of 48 cm, and a circumference of 3.14159 cm, or 150.8 cm, rounded to the nearest centimeter.
What exactly are circumference and diameter?Definition. The circumference of a circle is the length measured around its edge. The diameter of a circle is the distance from the center to the outside. The radius of a circle is the distance between any two points on its edge.
Does diameter include radius?A ring's diameter is equal to half of its diameter, or vice versa, meaning that the diameter of a circle is twice as long as the radius.
To know more about diameter visit:
https://brainly.com/question/11489296
#SPJ1
It takes Ann 3 minutes to run 800 meters without sandbags. If Ann runs 800 metes with sandbags it will take 2 more minutes. Whats the speed for running with sandbags
Answers
According to question, If Ann runs 800 metes with sandbags it will take 2 more minutes then Ann's speed for running with sandbags is 160 meters per minute.
What is a speed?A scalar quantity, speed is defined as the size of the change in an object's location over time or the size of the change in the position of an object per unit of time.
Use formula
speed = distance / time
speed without sandbags = 800 meters / 3 min.
speed without sandbags = 266.67 meters per min.
Now, let's find Ann's time to run 800 meters with sandbags:
time with sandbags = 3 minutes + 2 minutes = 5 minutes
speed with sandbags = 800 meters / 5 minutes
speed with sandbags = 160 meters per minute
Therefore, Ann's speed for running with sandbags is 160 meters per minute.
To know more about speed visit :
https://brainly.com/question/13263542
#SPJ1
In a gas experiment, the pressure of the gas is plotted against the reciprocal of the volume of the gas at a constant temperature.
Answers
The experiment would have the graph of the Boyle's law. The slope is work (N/m). Option C
What is the graph of Boyles law?Boyle's law is a gas law that describes the relationship between the pressure and volume of a gas at a constant temperature. The law states that the pressure of a gas is inversely proportional to its volume, or P ∝ 1/V, where P is the pressure and V is the volume.
The graph of Boyle's law can be used to predict the behavior of gases under different conditions, such as changes in temperature or the addition of other gases.
Learn more about Boyle's law:https://brainly.com/question/30367133
#SPJ1
Missing parts;
In a gas experiment, the pressure of the gas is plotted against the reciprocal of the volume of the gas at a constant temperature. the unit of the slope of the resulting curve is
A.
force
B.
force/m
C.
work
D.
force/m
3
E.
energy/m
Another pitcher throws the same baseball in a straight line. Its momentum is 2.1 kg times m/sec. What is the velocity of the ball?
Answers
v=p/m
v=2.1 kg x m/s
0.14 kg
v=15 m/s
A 2 kg cue ball is moving at a velocity of 2 m/s when it collides with another 3 kg billiard ball at rest.
What is the total momentum of the system?
Answers
A 2 kg cue ball is moving at a velocity of 2 m/s when it collides with another 3 kg billiard ball at rest. The total momentum is 4 kg m/ s.
Elaborating the problem:
Before the collision, the momentum of the 2 kg cue ball is:
p₁ = m₁ × v₁
p₁ = 4 kg m/s
The 3 kg billiard ball is at rest, so its momentum is: p₂ = 0 kg m/s
The total momentum of the system before the collision is:
p_total = p₁ + p₂
p_total = 4 kg m/s
The total momentum of the system after the collision is:
p_total = M × [tex]V_{f}[/tex]
p_total = p₁ + p₂
M × [tex]V_{f}[/tex] = p₁ + p₂
5 kg × [tex]V_{f}[/tex] = 4 kg m/s + 0 kg m/s
5 kg * [tex]V_{f}[/tex] = 4 kg m/s
Therefore, [tex]V_{f}[/tex] = 0.8 m/s
So, the total momentum of the system is:
p_total = M × [tex]V_{f}[/tex]
p_total = 5 kg × 0.8 m/s
p_total = 4 kg m/s
What is any system's total momentum?
A system's total momentum is the sum of the momentum of all its components. To put it another way, it is the total amount of motion experienced by the system's objects. The total momentum of an isolated system remains constant when there are no external forces acting on it, as stated by the law of conservation of momentum.
Learn more about total momentum:
brainly.com/question/7973509
#SPJ1
What is the period of the microwaves with a frequency of 30,000,000,000 Hz?
a.cannot be calculated
b.0
c.a really big number
d.a really small number
Answers
Answer:
The period of a wave is the time it takes for one complete cycle of the wave to occur. It is given by the formula:
Period = 1 / Frequency
where frequency is the number of cycles per second.
Using this formula, we can calculate the period of the microwaves with a frequency of 30,000,000,000 Hz as:
Period = 1 / 30,000,000,000 Hz
Period = 3.33 x 10^-11 seconds
Therefore, the period of the microwaves with a frequency of 30,000,000,000 Hz is a really small number, which is approximately 3.33 x 10^-11 seconds. The answer is (d) a really small number.
Explanation:
An object is moving at a velocity of 11.5 m/s to the left. How far does it move in
312.24 seconds?
Answers
Answer:
[tex]\huge\boxed{\sf d = 3590.76\ m}[/tex]
Explanation:
Given data:Velocity = v = 11.5 m/s
Time = t = 312.24 s
Required:Displacement = d = ?
Formula:d = v × t
Solution:d = 11.5 × 312.24
d = 3590.76 m[tex]\rule[225]{225}{2}[/tex]
The right hand rule states that you should always hold a compass in your right
hand.
Answers
False. The rule does not necessarily involve holding a compass in your right-hand.
The right-hand ruleThe right-hand rule is a general principle used in physics and engineering to determine the direction of various vectors.
There are different variations of the right-hand rule, but the basic idea is to use your right hand to orient your fingers or thumb in a particular direction to determine the direction of a magnetic field, force, or other vector quantity.
Thus, the rule does not necessarily involve holding a compass in your right hand.
More on the right-hand rule can be found here: https://brainly.com/question/9750730
#SPJ1
Determine if the following statement is true or false. The right-hand rule states that you should always hold a compass in your right hand.
Emma created a table to describe the weather conditions in her area on a specific day. Which of the following descriptions correctly completes the table?
Precipitation Air Temperature
25 °C
Sunny
a
7 mm and 25 kg
b
24 mph and 5 mm
c
West and 20 mph
d
10 inches and 50%
Answers
Well to be honest i probably could answer this if I had the thing to look at to solve it but if not i saw try lucky C. although that doesn't seem like the answer to be honest, either A. or B. seem like reasonable answers to Since D. Does not make sense for this specific question stated, inches for Celsius? Seems a bit off. I say maybe 1. or b. But if your daring choose D. It is really up to you to decide, After all I really do not have anything to base this off of.
A model shows a machine that works using electrical fields. What would this machine
need for the electrical field to function properly? (1 point)
A. at least two charged, interacting parts
B. all neutral components
C. Moving parts, for kinetic energy
D. springs, to store potential energy
Answers
Answer:
c
Explanation:
A 500-lb. pile driver is raised to a height of 12 feet, then dropped.
____ ft-lbs of work is done on the pile driver in raising it.
The increase in the pile driver's potential energy is
____ ft-lbs.
What is the maximum kinetic energy the pile driver will have after it is released is
______ ft-lbs.
Answers
Answer:
1 = The answers are 6, 60, 600, or 6
Explanation:
An object of mass 80kg was placed in a lift ascending at 1.25ms * -2. Calculate its weight in the lift. [g=10ms]
Answers
The apparent weight of the object in the lift is 900 N.
What is meant by apparent weight in an elevator ?When a man is travelling in an elevator, his weight appears to change. His changed weight is known as apparent weight.
Here,
The elevator is ascending. So the apparent weight,
R = mg + ma
R = m(g + a)
R = 80(10 + 1.25) = 80x 11.25
R = 900 N
Hence,
The apparent weight in the lift is 900 N.
To learn more about apparent weight, click:
https://brainly.com/question/7030391
#SPJ1
A certain material has a critical angle of 52.0 degrees. What is its index of refraction?
Answers
A given substance's index of refraction will be ni 1.27 if its critical angle is 52.0. The critical angle refers to the point of contact that determines that the refraction angle is 90 degrees in optics.
Refractive index is characterized by the variance between the speed of a light beam in atmosphere and the provided medium. As a result, it is possible to determine how the angle of inclination and index of refraction are related because they are inversely proportional.
Angle of Criticality and Refractive Index
Mathematics may be used to express the following relationship among critical angle & refractive indices:
[tex]sin C =[/tex] μ [tex]\frac{1}{ \\\frac{a}{b} }[/tex]
Where,
The crucial angle is called C.
The medium's refractive index is represented by μ .
Two media for light waves are represented by letters a and b.
To know more about speed click here
brainly.com/question/28224010
#SPJ1
Compare the cost of both natural gas and hydropower.
Which is more expensive to create?
Which is more expensive to use?
Answers
Answer:
The cost of natural gas and hydropower can vary depending on factors such as location, technology used, and market conditions. However, in general:
~ Creating natural gas infrastructure can be more expensive than hydropower infrastructure. This is because natural gas requires drilling wells, building pipelines, and constructing processing facilities. Hydropower, on the other hand, requires building dams and installing turbines, which can also be expensive but typically have a longer lifespan than natural gas infrastructure.
~ Using natural gas can be more expensive than hydropower in terms of fuel costs. Natural gas is a fossil fuel and its price can be volatile, depending on factors such as supply and demand, geopolitical events, and weather. In contrast, hydropower relies on the flow of water, which is a renewable resource and typically has a lower cost.
However, it's worth noting that the cost of natural gas and hydropower also depends on how they are used. For example, natural gas is often used to generate electricity, heat buildings, and power vehicles, while hydropower is mainly used to generate electricity. The cost-effectiveness of each option will depend on the specific context in which they are used.
help please I don't understand
Answers
The force line which shows the force of gravity that the Earth exerts on the Moon is line A.
The reason Line A is thicker than arrow B is because the Earth exerts a greater force of gravity on the Moon.
How to describe the gravity exerted ?According to Newton's Third Law of Motion, for every action, there is an equal and opposite reaction. Therefore, the gravitational force exerted by the Earth on the moon is equal in magnitude and opposite in direction to the gravitational force exerted by the moon on the Earth.
The force of gravity between two objects depends on their masses and the distance between them, so the force of gravity between the Earth and moon is proportional to their masses and the distance between them. While the moon's gravity does have an impact on the Earth, such as causing ocean tides, it is not a greater force than the Earth's gravity.
Find out more on gravity at https://brainly.com/question/13086036
#SPJ1