a 15000kg locomotive is moving at 12 m/s what is it’s kinetic energy

 Adding an additional lamp to a series circuit will increase the brightness of all the lamps in the circuit, and increase the current as well.

A series circuit comprises a path along which the whole current flows through each component. A parallel circuit comprises branches so that the current divides and only part of it flows through any branch.A circuit is said to be connected in series when the same current flows through all the components in the circuit. In such circuits, the current has only one path. Let us consider the household decorative string lights as an example of a series circuit.So, series circuits are also called Voltage dividers. For parallel circuits, it's the opposite, as voltage will flow the same in each path, the current get's dropped/separated for each path. For that very behaviour, these circuits are also called as Current dividers.

For such more questions on series circuit:

brainly.com/question/19865219

#SPJ11

Answer:

The sentence can be completed as:

The two elements in this model may or may not bond into one ratio, depending on their electronegativities and the specific conditions of the reaction.

Answer: Kinetic Energy

Side Note: this may not be what you were looking for but, different forces on a object depends on what kind of energy it is, say or if it is moving that means kinetic energy

This means that the rocket will not reach the same height as it would at a higher launch angle, and it will also cover less horizontal distance before hitting the ground.

What is Trajectory angle?

Trajectory angle refers to the angle at which an object is launched or thrown relative to the horizontal plane. It is the angle between the initial velocity vector of the object and the horizontal plane. In physics and engineering, the trajectory angle is an important parameter that determines the trajectory of a projectile or a moving object.

Lowering the angle of launch of a rocket to 45 degrees will result in a shorter and lower trajectory compared to launching the rocket at a higher angle. When the rocket is launched at a lower angle, it will have less vertical velocity and more horizontal velocity compared to a rocket launched at a higher angle.

However, launching the rocket at a lower angle can be useful in certain situations where the goal is to cover a shorter distance or to maintain a lower altitude, such as in a low-altitude reconnaissance mission or in a missile attack where the target is closer.

Learn more about Trajectory angle from given link

https://brainly.com/question/29148039

#SPJ1

The diagram and information in the section "Stages of Photosynthesis" provide a coherent understanding of the light and dark reactions of photosynthesis.

The light-dependent reactions occur in the thylakoid membranes of the chloroplasts and are driven by light energy. The light energy is absorbed by pigments such as chlorophyll and converted into chemical energy in the form of ATP and NADPH. The light-dependent reactions also produce oxygen gas as a byproduct.

The ATP and NADPH produced in the light-dependent reactions are then used in the light-independent reactions, which occur in the stroma of the chloroplasts. The light-independent reactions, also known as the Calvin cycle, use carbon dioxide and the energy from ATP and NADPH to synthesize glucose and other organic compounds. The Calvin cycle does not directly require light, but it is dependent on the products of the light-dependent reactions.

Together, the light-dependent and light-independent reactions of photosynthesis form a coherent cycle that allows plants and other photosynthetic organisms to convert light energy into chemical energy in the form of glucose and other organic compounds. The diagram and information in the section "Stages of Photosynthesis" provide a clear visual and textual representation of this process, helping to develop a coherent understanding of the overall process of photosynthesis.

Learn more about light and dark reactions, here:

https://brainly.com/question/12995206

#SPJ1

The guilty batter will often be removed from the game after charging the mound, though depending on the situation, there may also be a fine or suspension. Discipline for throwing a beanball may also be applied to the pitcher.

For more information on MLB pitchers kindly visit to

https://brainly.com/question/29843528

#SPJ1

An unexpected result is examined a lot more closely, since it must disagree with some currently accepted theory to be accepted as unexpected.

A scientist may develop the hypothesis that a given type of tomato will be red if it carries the gene for the colour red. The scientist then discovers that every tomato of this variety is red during investigation.

Hypotheses are frequently employed to promote scientific research and enhance knowledge. These clear declarations serve as the cornerstone for all research experiments.

Therefore, a problem in the creation of a hypothesis may lead to errors in the design of a whole experiment.

Learn more about  experiments on:

https://brainly.com/question/30055326

#SPJ1

The ratio of the speed that maximizes the distance and the speed that minimizes the required power is 1.

Distance is the measurement of space between two objects or points. It is an important concept in mathematics, physics, and many other scientific fields. Distance can be measured in linear units such as meters, kilometers, feet, or miles. It can also be measured in angular units such as degrees, radians, or arcminutes. Distance can be calculated by using various formulas and calculations, such as the Pythagorean theorem or the distance formula.

The choice of w that will minimize the power required to keep moving at speed v is w = √(d/c). The speed u that will maximize the range is u = √(d/c) × v. The ratio of the speed that maximizes the distance and the speed that minimizes the required power is 1.

To learn more about distance

https://brainly.com/question/26550516

#SPJ1

Answer: I believe the frequency of a wave is 66.6667 Hz :)

Explanation:

Cassie's displacement vector from the statue is 0.30 miles (which is the magnitude of the vector formed by the x and y components) and it points 34.6° east of south.

So the correct answer is option d: 0.30 miles, 34.6 east of south.

What is Displacement Vector?

In physics, displacement vector is a vector that describes the change in position of an object, relative to its starting point, and it's defined as the vector that points from the initial position of the object to its final position.

o find Cassie's displacement vector from the statue, we need to determine the distance and direction from the statue to Cassie's final position. We can use vector addition to add up the individual displacement vectors for each leg of her journey:

The first leg is 0.25 miles north, which can be represented by a vector pointing straight up.

The second leg is 0.18 miles west, which can be represented by a vector pointing straight left.

The third leg is 0.28 miles north, which can be represented by a vector pointing straight up.

The fourth leg is 0.33 miles east, which can be represented by a vector pointing straight right.

The fifth leg is 0.78 miles south, which can be represented by a vector pointing straight down.

We can add these vectors together by breaking them down into their x and y components, then adding the x components separately and the y components separately. The resulting vector will have an x component and a y component that give us the total distance and direction from the statue to Cassie's final position.

The x components of the vectors are:

0 (no x component for the first leg)

-0.18 miles (negative because it's pointing left)

0 (no x component for the third leg)

0.33 miles

0 (no x component for the fifth leg)

Adding these together gives us a total x displacement of:

0 + (-0.18) + 0 + 0.33 + 0 = 0.15 miles east

The y components of the vectors are:

0.25 miles

0 (no y component for the second leg)

0.28 miles

0 (no y component for the fourth leg)

-0.78 miles (negative because it's pointing down)

Adding these together gives us a total y displacement of:

0.25 + 0 + 0.28 + 0 + (-0.78) = -0.25 miles south

Therefore, Cassie's displacement vector from the statue is 0.30 miles (which is the magnitude of the vector formed by the x and y components) and it points 34.6° east of south.

So the correct answer is option d: 0.30 miles, 34.6 east of south.

Learn more about  Displacement Vector from given link

https://brainly.com/question/12006588

#SPJ1

To calculate the work done by the pulley and the power required to lift a 25 kg mass to a height of 12 m using the pulley, we need to consider the potential energy gained by the mass and the work done by the pulley.

The potential energy gained by the mass is given by the equation mgh, where m is the mass, g is the acceleration due to gravity (9.81 m/s^2), and h is the height. Substituting the given values, we get: Potential energy gained = 25 kg × 9.81 m/s^2 × 12 m = 2943.6 J. To calculate the work done by the pulley, we need to consider the force required to lift the mass and the distance over which the force is applied. The force required to lift the mass is given by the equation F = mg, where m is the mass and g is the acceleration due to gravity. Substituting the given values, we get: Force required = 25 kg × 9.81 m/s^2 = 245.25 N. The distance over which the force is applied is equal to the distance the mass is lifted, which is 12 m. The work done by the pulley is therefore: Work done by pulley = force × distance = 245.25 N × 12 m = 2943 J. To calculate the power required, we can use the equation power = work/time. The time taken to lift the mass can be calculated using the equation h = ut + 0.5at^2, where u is the initial velocity (zero in this case), a is the acceleration due to gravity, and t is the time taken. Rearranging the equation, we get: Time taken = sqrt(2h/g) = sqrt(2 × 12 m/9.81 m/s^2) = 1.71 s. Substituting the values for work and time, we get: Power required = work/time = 2943 J/1.71 s = 1717.54 W. Therefore, the work done by the pulley is 2943 J and the power required is 1717.54 W to lift a 25 kg mass to a height of 12 m using a pulley with a radius of 20 cm and a mass of 6 kg

To learn more about Pulley click the link below

brainly.com/question/13752440

#SPJ4

The car's momentum change is 4000 kg/m/s because momentum change equals impulse.

Impulse can be summed up as follows: In this case, the car experienced an impulse of 4000 kg/s. Impulse = force x time.

The following formula can be used to determine the car's change in momentum using this information: The car's momentum change is 4000 kg/m/s because momentum change equals impulse.

The change in an object's momentum caused by a force acting on it for a certain amount of time is equal to impulse. An object's momentum change is measured by its impulse, which is defined as the sum of the object's acting force and time. Calculating impulse can be done by: Force x time is the impulse.

Learn more about momentum:

brainly.com/question/402617

#SPJ1

Demarius has gained an elevation of 233 m. Option D.

To solve this problem, we can use trigonometry. Let's call the elevation Demarius has gained "h". Then, we can use the following trigonometric relationship:

tan θ = h / d

where θ is the angle of the slope (13.5°), and d is the distance Demarius has walked along the slope (955 m).

Rearranging this equation to solve for h, we get:

h = d * tan θ

Substituting the values we know, we get:

h = 955 m * tan 13.5°

h ≈ 223 m

Therefore, Demarius has gained approximately 223 meters in elevation.

More on elevation can be found here: https://brainly.com/question/29477960

#SPJ1

Answer:

43.3 m/s.

Explanation:

Assuming the potential energy is due to the gravitational potential energy, we can use the conservation of energy to find the kinetic energy:

Total energy = Potential energy + Kinetic energy

Kinetic energy = Total energy - Potential energy

Kinetic energy = 300 J - 40 J = 260 J

However, we need to know the mass of the object to convert the kinetic energy to velocity. We can use the potential energy to find the mass:

Potential energy = mgh

40 J = m(9.81 m/s^2)(300 m)

m = 0.137 kg

Now we can use the kinetic energy to find the velocity:

Kinetic energy = (1/2)mv^2

260 J = (1/2)(0.137 kg)v^2

v^2 = (2*260 J) / 0.137 kg

v = 43.3 m/s (rounded to one decimal place)

Therefore, the kinetic energy is 260 J and the velocity of the object when it reaches the ground is 43.3 m/s.

[tex] \boxed{\boxed{ \rm \: Velocity = \dfrac{Displacement}{Time} }}[/tex]

The kinetic energy of an object is the energy that is associated with its motion. The average kinetic energy of the particles that make up an object is a measure of the temperature of the object.

What is kinetic energy?

Kinetic energy is the energy that an object possesses due to its motion. Any object that is moving has kinetic energy. The amount of kinetic energy that an object has depends on its mass and its velocity. The equation for calculating the kinetic energy of an object is KE = 0.5 * m * v^2, where KE is the kinetic energy, m is the mass of the object, and v is the velocity (speed) of the object.

The correct answer is A: the average kinetic energy of the particles that make up an object.

The kinetic energy of an object is the energy that is associated with its motion. The average kinetic energy of the particles that make up an object is a measure of the temperature of the object. The higher the temperature of an object, the greater the average kinetic energy of its particles.

Option B describes potential energy, which is the energy stored in an object due to the position of its particles. This energy can be converted into kinetic energy if the object is allowed to move.

Option C describes thermal energy, which is the total energy of all the particles within an object, including both kinetic and potential energy.

Option D describes heat transfer, which is the transfer of thermal energy from one object to another due to a temperature difference.

Learn more about kinetic energy click here:

#SPJ1

The velocity of the dodgeball after the collision is approximately 352.8 m/s.

Using the conservation of momentum principle, we can write:

m_child * 0 + m_dodgeball * v = m_child * (-4.2) + m_dodgeball * v'

Substituting the given values, we get:

0.25 kg * v = 52 kg * (-4.2 m/s) + 0.25 kg * v'

Simplifying and solving for v', we get:

v' = (0.25 kg * v + 52 kg * 4.2 m/s) / 0.25 kg

v' = 352.8 m/s

velocity is a vector quantity that describes the rate of change of an object's position over time. It is defined as the displacement (change in position) of an object divided by the time interval over which the displacement occurred. Velocity is often expressed in units of meters per second (m/s).

Velocity includes both speed and direction, so two objects can have the same speed but different velocities if they are moving in different directions. In addition to describing the motion of objects, velocity is also used to calculate other important quantities in physics, such as acceleration and momentum. It plays a crucial role in many areas of physics, from classical mechanics to relativity, and is a fundamental concept in understanding the behavior of the physical world.

To learn more about Velocity visit here:

brainly.com/question/17127206

#SPJ4

Answer: about half of the sea ice area in the Arctic has been lost.

Explanation: The shrinking summer sea ice cover is a visible manifestation of global warming, and affects marine ecosystems, ocean circulation, and potentially weather events further south of the Arctic.

Explanation:

The current flow created by the strobe's capacitor can be calculated using the formula:

I = C * (ΔV / Δt)

where I is the current flow, C is the capacitance, ΔV is the potential difference, and Δt is the time interval between flashes.

Substituting the given values, we get:

I = 200 * 10^-6 F * (1000 V / 1 s) * 4

Simplifying this expression, we get:

I = 0.8 A

Therefore, the current flow created by the strobe's capacitor is 0.8 amperes

Because you are testing temperature, it is the independent variable. You must calculate each player's score because you're aiming to gauge how effectively football players perform in various environments.

Hypothesis The amount of happiness increases with daily sun exposure. The assumed cause in this example and the explanatory variables is sun exposure. The assumed impact, or dependent variable, is the degree of happiness.

A hypothesis is a statement about the physical world that can be verified by observations or tests. Hypotheses must be falsifiable and subject to scientific scrutiny in order to qualify as scientific.

To know more about Hypothesis visit:

https://brainly.com/question/29519577

#SPJ9

Explanation:

As the distance increases, the absolute value of the force decreases. Therefore, the correct answer is "increases; decreases". This is in accordance with Coulomb's Law, which states that the force between two charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. As the distance between the charges increases, the force between them decreases because the inverse square relationship causes the force to weaken rapidly with distance.

The potential energy of an object is the product of its mass, acceleration due to gravity and height of the object from the surface. Here, the potential energy of the object is 3118.2 J.

Potential energy of an object is the energy generated by virtue of its position. It is the energy stored on the object when it is at rest. When the object starts moving its potential energy starts to convert to kinetic energy.

the potential energy of an object is related to its mass, acceleration due to gravity g and height from the surface h as:

P = mgh.

then, m = 26.21 Kg

h = 12.14 m

g = 9.8 m/s²

p = 26.21 Kg × 9.8 m/s² × 12.14 m = 3118.2 J.

Therefore, the potential energy of the object is 3118.2 J.

Find more on potential energy:

https://brainly.com/question/24284560

#SPJ1

The heat needed for the air to change from 27°C to 400°C is 291 J.

First, calculate the final volume of the air using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Assuming that the pressure remains constant, rearrange the ideal gas law to solve for the final volume:

V₂ = (nRT₂) / P

where T₂ is the final temperature.

Calculate the initial number of moles of air using the ideal gas law with the original conditions:

n = (PV) / RT₁

where T₁ is the initial temperature.

Substituting the given values:

n = (3.0 atm x 5860 cm3) / (0.0821 L atm/mol K x 300 K)

n = 0.72 mol

Now calculate the final volume:

V₂ = (0.72 mol x 0.0821 L atm/mol K x 673 K) / (3.0 atm)

V₂ = 13.47 L

The change in volume is therefore:

ΔV = V₂ - V₁

ΔV = 13.47 L - 5.86 L

ΔV = 7.61 L

To calculate the heat required, use the equation:

q = nCvΔT

where ΔT is the change in temperature.

Substituting the given values:

q = (0.72 mol x 0.177 cal/g °C x (400°C - 27°C))

q = 69.7 cal

Finally, convert this to joules:

q = 69.7 cal x 4.184 J/cal

q = 291 J

Therefore, the amount of heat that must be added to the air is 291 J.

Learn more on specific heat capacity here: https://brainly.com/question/27991746

#SPJ1

The complete question is:

For air, Cv= 0.177 cal/g.°C. Suppose that air is confined to a cylinder by a movable piston under a constant pressure of 3.0 atm. How much heat must be added to the air if its temperature is to be changed from 27°C to 400°C? The mass of air in the cylinder is 20 g, and its original volume is 5860 cm.

The Young's modulus for polythene is 0.3-0.5 GPa (3000-5000 N/m2).

The Young's modulus (E) is a property of the material that tells us how easily it can stretch and deform and is defined as the ratio of tensile stress (σ) to tensile strain (ε). Where stress is the amount of force applied per unit area (σ = F/A) and strain is extension per unit length (ε = dl/l).Young's modulus E, the Young modulus, or the modulus of elasticity in tension or compression, is a mechanical property that measures the tensile or compressive stiffness of a solid material when the force is applied lengthwise.The higher the modulus, the more stress is needed to create the same amount of strain; an idealized rigid body would have an infinite Young's modulus. Conversely, a very soft material (such as a fluid) would deform without force, and would have zero Young's modulus.

For such more questions on Young's modulus:

brainly.com/question/30730491

#SPJ11

The period of the wave is the inverse of the frequency. The distance between the two successive crest or troughs is known as the wavelength. The period of the wave is 0.020 s.

The time taken by the particle of the medium to complete one vibration is defined as the period of the wave. The number of oscillations per second is known as the frequency. The equation used to calculate the period of a wave is:

T = 1 / f

The frequency of a wave is:

f = ν / λ

f = 129 m/s / 2.6 m

f = 49.6 Hz

Then the period of a wave is:

T = 1 / f

T = 1 /  49.6

T = 0.020 s

Thus the period of a wave is 0.020 s.

To know more about period, visit;

https://brainly.com/question/29199104

#SPJ9

The main differences between air and water and air and glass are their density, viscosity, compressibility, refractive index, and transparency.

Air and water fluctuate in density, viscosity, and compressibility. Air is lots much less dense than water and has a decreased viscosity, which means that it flows greater without difficulty.

Air is also a lot more compressible than water, which means that it may be compressed to a miles smaller volume than water. On the subject of air and glass, there are numerous variations as properly. Glass is stable, whilst air is gasoline.

Glass is also an awful lot denser than air and has a higher refractive index, which means that it bends mild more than air does. This is why lenses manufactured from a glass are frequently used in cameras and telescopes for consciousness mild.

Any other essential distinction between air and glass is their transparency. Air is completely obvious to see light, while glass can both be transparent or opaque depending on its composition and any impurities it may comprise.

Learn more about air:

brainly.com/question/19368011

#SPJ4

If the same force is applied to an object with a small mass, it will experience a greater acceleration due to less inertia and the ease with which it can be accelerated. In contrast, an object with a larger mass will require more force to achieve the same acceleration.

According to Newton's Second Law of Motion, the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass. Mathematically, we can express this relationship as:

acceleration = force / mass

Therefore, if the same force is applied to an object with a small mass, it will experience a greater acceleration compared to an object with a larger mass. This is because the smaller mass results in less inertia, meaning it requires less force to cause a given acceleration. In other words, a smaller mass will accelerate more easily when the same force is applied to it. For example, if you apply the same force to a baseball and a bowling ball, the baseball will accelerate much more quickly because it has a smaller mass than the bowling ball. Conversely, if you apply the same force to a truck and a car, the car will accelerate more quickly because it has a smaller mass than the truck.

To know more about acceleration please refer: https://brainly.com/question/12550364

#SPJ4

The sister of 10 N should be seated at a distance of 2 m from the pivot to balance the see-saw.

The total weight on the left side is 60 N, and on the right side is 50 N (40 N + 10 N). The two sides must be equal for the see-saw to balance, so 10 N needs to be added to the left side. The sister of 10 N should be placed 2 m away from the pivot on the left side to balance the see-saw.To balance the seesaw it is important that both forces pulling down on each side of the beam are exactly equal. This is only true if the needle is placed exactly in the middle of the candle beam. If one side is slightly longer, this would also make it heavier and it would drop down, as you might have observed.

For such more questions on  see-saw balance:

brainly.com/question/30016871

#SPJ11