what is the work done by the electric force to move a 1 c charge from a to b? express your answer in joules.

We can solve this problem using the conservation of energy principle:

Initial potential energy = Final kinetic energy

The initial potential energy is equal to the potential energy at the top of the tower:

PE = mgh

where m is the mass of the ball, g is the acceleration due to gravity (9.81 m/s^2), and h is the height of the tower (46.6 m).

PE = (0.1557 kg)(9.81 m/s^2)(46.6 m) = 71.9 J

The final kinetic energy of the ball just before impact can be calculated using the formula:

KE = 1/2 mv^2

where m is the mass of the ball and v is its velocity.

Since the ball was dropped from rest, its initial velocity was zero. Therefore, all of the potential energy at the top of the tower is converted to kinetic energy just before impact.

PE = KE

71.9 J = 1/2 (0.1557 kg) v^2

v^2 = (2 × 71.9 J) / 0.1557 kg = 828.6

v = sqrt(828.6) = 28.8 m/s (rounded to one decimal place)

The velocity of the ball just before impact is 28.8 m/s.

The kinetic energy of the ball just before impact can be calculated using the formula:

KE = 1/2 mv^2

where m is the mass of the ball and v is its velocity.

KE = 1/2 (0.1557 kg) (28.8 m/s)^2 = 61.7 J (rounded to one decimal place)

Therefore, the ball has 61.7 J of kinetic energy just before impact.

.How far objects are clearly visible by the eyes is known as the far point. The point where objects appear clearly without strain is known as the near point. In the question, the near point is 20 cm from the eye and the far point is at infinity, which means it can see up to infinity distance. Hence, the range of Anna's vision is 1.

To calculate the power of the eye lens, we use the following formula:

The refractive power of the eye = 1/f

where f is the focal length of the eye lens.2. Far point of the eye, the image is formed at the retina, therefore,

f = 20 mm = 0.02 m  = 1/f = 1/0.02 m = 50 D3.

Near the point, the image is formed at a distance of 20 cm from the eye lens.

To calculate the focal length:

f = 20 cm = 0.2 mf = 1/f = 1/0.2 m = 5 D4.

Range of Anna's vision = Refractive power of eye at the near point - Refractive power of eye at the far point

= 5 D - 50 D= -45

Thus, the range of Anna's vision is -45 D.

#SPJ11

to learn more about refractive power : https://brainly.com/question/25164545

The final speed of a baseball thrown at 48 m/s with a mass of 0.16 kg after being hit by a bat with an average force of 8300 N for 2.6 ms is 58.58 m/s.

The initial velocity of the baseball is given as 48 m/s. We have to find the final velocity of the baseball after it is hit by a bat. The mass of the baseball is given as 0.16 kg, and the force exerted by the bat is given as 8300 N for 2.6 ms. The formula for calculating the final velocity of an object is as follows:

v = u + (Ft/m)

Here, v is the final velocity of the baseball, u is the initial velocity of the baseball, F is the force exerted on the baseball, t is the time for which the force is exerted, and m is the mass of the baseball.

Now, let us substitute the given values in the above formula to find the final velocity of the baseball:

v = 48 + (8300 × 2.6 × 10^-3 / 0.16) = 58.58 m/s

Therefore, the final velocity of the baseball is 58.58 m/s.

Learn more about Force:

https://brainly.com/question/13370981

#SPJ11

Assuming the given atom to be a negatively charged ion of oxygen, it would be classified as an oxide ion (O2-), while a neutral oxygen atom would be simply called oxygen (O), and a positively charged ion of oxygen would be an oxygen cation or oxonium ion (O+).

The given configuration of an atom with 8 protons and 7 electrons is not that of an oxygen atom, as oxygen atoms have 8 electrons and 8 protons in their nuclei. However, if we assume that the atom is a negatively charged ion of oxygen, it would be classified as an oxide ion (O2-), which is a stable anion of oxygen.

If it were a neutral oxygen atom, it would simply be classified as oxygen (O), while a positively charged ion of oxygen would be called an oxygen cation or oxonium ion (O+).

To know more about protons, here

brainly.com/question/19361294

#SPJ4

The maximum acceleration of the car so the mug does not slide off is 6.861 m/s².

To find the maximum acceleration of the car so the mug does not slide off, follow these steps:

1. Determine the maximum static friction force between the mug and the roof using the formula:

static friction force = coefficient of static friction * normal force.

In this case, the normal force is equal to the weight of the mug (mass * gravity), so the formula becomes:

static friction force = 0.7 * (0.3 kg * 9.81 m/s²).

2. Calculate the static friction force: 0.7 * (0.3 kg * 9.81 m/s²) = 2.0583 N.

3. Determine the maximum acceleration by dividing the static friction force by the mass of the mug: maximum acceleration = static friction force / mass of the mug = 2.0583 N / 0.3 kg.

4. Calculate the maximum acceleration: 2.0583 N / 0.3 kg = 6.861 m/s².

For more details about acceleration click here:

https://brainly.com/question/12550364#

#SPJ11

The minimum amount of energy required for an 80-kg climber carrying a 20-kg pack to climb Mt. Everest, which is 8,850 meters high is  8,673,550 Joules. It can be calculated using the formula for gravitational potential energy.

Gravitational potential energy= PE = m ×g×h, where:
PE = potential energy
m = mass (total mass of the climber and the pack)
g = acceleration due to gravity (approximately 9.81 m/s²)
h = height (the altitude of Mt. Everest)

First, determine the total mass of the climber and the pack:
m = 80 kg (climber) + 20 kg (pack) = 100 kg
Next, find the gravitational potential energy:
PE = 100 kg ×9.81 m/s² × 8,850 m
PE = 100 kg × 9.81 m/s²× 8,850 m = 8,673,550 Joules

Therefore, the minimum amount of energy required is 8,673,550 Joules. Keep in mind that this calculation assumes no energy loss due to factors such as friction, air resistance, or the climber's physical exertion beyond lifting their body and the pack vertically. In reality, the energy required would likely be higher due to these factors.

To know more about potential energy click here

brainly.com/question/22938609

#SPJ11

Indeed, the limited range of wavelengths between infrared and ultraviolet light constitutes visible light. The wavelength of visible light falls between 400 and 700 nanometers.

The wavelength range of UV "light" is about between 10 and 400 nanometers. Violet light has a wavelength of about 400 nanometers (or 4,000 ). The frequency range of ultraviolet light is between 800 terahertz (THz, or 1012 hertz), and 30,000 THz.

The visible light spectrum has a wavelength range of 400 to 700 nanometers, and in this section, we learn what each color's wavelength is. The visible light spectrum has multiple distinct colours with various wavelengths.

To know more about wavelengths visit:-

https://brainly.com/question/13533093

#SPJ1

The colors that we see in objects, including flowers like roses and violets, depend on the pigments they contain and the way that those pigments interact with light.

When light shines on an object, some of the light is absorbed by the object, while the rest is reflected. The color that we perceive is the color of the light that is reflected by the object.

In the case of roses, the petals contain pigments called anthocyanins, which absorb light in the green to yellow range of the spectrum and reflect light in the red to purple range. This is why we perceive roses as being red or purple.

Violets, on the other hand, contain pigments called violaxanthin and anthocyanins, which absorb light in the blue and violet range of the spectrum and reflect some light in the blue range. This is why we perceive violets as being blue.

Learn more about color here:

https://brainly.com/question/30186758

#SPJ11

The wavelength of the carrier wave of a campus radio station broadcasting at a frequency of 102.2 MHz is approximately 2.94 meters, calculated using the formula wavelength = speed of light/frequency.

The wavelength of the carrier wave of a radio station can be calculated using the formula:

wavelength = speed of light/frequency

where the speed of light is approximately [tex]3 x 10^8 m/s[/tex].

Plugging in the frequency of the campus radio station, which is 102.2 MHz or [tex]102.2 x 10^6 Hz[/tex], we get:

wavelength [tex]= 3 x 10^8 m/s / 102.2 x 10^6 Hz = 2.93[/tex] meters

Therefore, the wavelength of the carrier wave of the campus radio station is 2.93 meters.

It's important to note that the wavelength of a radio wave is inversely proportional to its frequency. This means that as the frequency of the wave increases, its wavelength decreases, and vice versa.

learn more about  radio station here:

https://brainly.com/question/29803733

#SPJ4

The total momentum of the child and the bike together is 282.66 kg m/s to the northwest.

The momentum of the child can be calculated as:

p_child = m_child * v_child

where m_child = 78.30 kg is the mass of the child, and v_child = 3.39 m/s is the velocity of the child.

p_child = 78.30 kg * 3.39 m/s = 265.35 kg m/s to the northwest

The momentum of the bike can be calculated as:

p_bike = m_bike * v_bike

where m_bike = 5.1 kg is the mass of the bike, and v_bike = 3.39 m/s is the velocity of the bike.

p_bike = 5.1 kg * 3.39 m/s = 17.31 kg m/s to the northwest

To find the total momentum of the child and the bike together, we simply add the individual momenta together:

p_total = p_child + p_bike

p_total = 265.35 kg m/s + 17.31 kg m/s

p_total = 282.66 kg m/s to the northwest

The total momentum of the child and the bike together is 282.66 kg m/s to the northwest.

learn more about momentum here

https://brainly.com/question/7538238

#SPJ1

The magnitude of the force that each wire exerts on a 1.20 -m length of the other is 0.

Using the Biot-Savart law, the formula for the magnitude of the force is

F = BIL sinθ

Given:  i1 = 10.0 A and i2 = 4.00 A.

Distance r1 and  r2.

r1 = √(2² + 1.2²) = 2.44 m

r2 = √(2² + 1.2²) = 2.44 m

where, r1 is the distance from i1 to i2 and  r2 is the distance from i2 to i1

The magnetic field at the location of the other wire for each wire is,

B1 = (μ₀ / 2π) i1 / r1 = (4π × 10-7 T m/A / 2π) × 10.0 A / 2.44 m = 6.49 × 10-6 T

B2 = (μ₀ / 2π) i2 / r2 = (4π × 10-7 T m/A / 2π) × 4.00 A / 2.44 m = 2.60 × 10-6 T

Calculating force on each wire.

For F1, I = 4.00 A, L = 1.20 m, θ = 90°

F1 = B2IL1 sinθ1 = 0

For F2, I = 10.0 A, L = 1.20 m, θ = 90°

F2 = B1IL2 sinθ2 = 0

Therefore, there is no magnetic force between the two wires.

Know more about force here:

https://brainly.com/question/25239010

#SPJ11

It is D. It is 3 times bigger. The light-gathering power of a telescope is proportional to the area of its primary mirror or lens. The area of a circle is proportional to the square of its diameter, so the area of the 1-m telescope is π/4 square meters, while the area of the 3-m telescope is 9π/4 square meters.

Therefore, the light-gathering power of the 3-m telescope is 9/4 times greater than that of the 1-m telescope, or 2.25 times greater if we compare the ratios directly.

This means that the 3-m telescope can collect 2.25 times more light than the 1-m telescope. This increased light-gathering power translates to a significant advantage in observing fainter objects and detecting finer details in objects. The larger telescope can also resolve objects that are closer together, enabling astronomers to observe celestial bodies.

The 3-m telescope would also have a better angular resolution, meaning it can discern finer details in the objects it observes. This is because the angular resolution of a telescope is determined by the ratio of the wavelength of the observed light to the diameter of the telescope's primary mirror or lens.

Overall, the larger 3-m telescope has a much greater light-gathering power and resolving power, making it a much more powerful tool for astronomers than the 1-m telescope.

For more details about telescope click here:

https://brainly.com/question/19349900#

#SPJ11

The total work done on the elevator after 18.0 m is 28.75 kJ.

To find the work done on the elevator, we first need to determine the net force acting on it. We can do this by subtracting the frictional force from the force applied by the elevator cable:

Net force = applied force - frictional force

Net force = (mass of elevator) x (acceleration)

Net force = (1550 kg) x (0.750 m/s^2) - (200 N)

Net force = 1050 N

Now that we have the net force, we can calculate the work done on the elevator using the work-energy principle, which states that the work done on an object is equal to its change in kinetic energy:

Work done = (change in kinetic energy)

Work done = (final kinetic energy) - (initial kinetic energy)

Work done = (1/2)(mass)(final velocity)^2 - (1/2)(mass)(initial velocity)^2

To find the final velocity, we can use the kinematic equation:

final velocity^2 = initial velocity^2 + 2(acceleration)(distance)

final velocity^2 = 0 + 2(0.750 m/s^2)(18.0 m)

final velocity = 6.06 m/s

Now we can plug in the values to calculate the work done:

Work done = (1/2)(1550 kg)(6.06 m/s)^2 - (1/2)(1550 kg)(0)^2

Work done = 28,746 J

Work done in kJ = 28,746 J / 1000 = 28.75 kJ

Therefore, the total work done on the elevator after 18.0 m is 28.75 kJ.

To know more about frictional force, visit:

https://brainly.com/question/30280752

#SPJ1

1.  you have gained 367,500 J of potential energy atop of the hill.

The potential energy gained atop the hill can be calculated using the formula:

potential energy = mass x gravity x height.

mass = 75 kg

gravity = 9.8 m/s^2 (acceleration due to gravity)

height = 500 m

Potential energy gained = 75 kg x 9.8 m/s^2 x 500 m = 367,500 J

Therefore, you have gained 367,500 J of potential energy atop of the hill.

2.  you will be traveling at approximately 34.26 m/s (or about 123.3 km/h) at the bottom of the hill.

The potential energy lost due to air resistance can be calculated by multiplying the initial potential energy gained by 0.5, since half of it is lost.

Potential energy lost = 0.5 x 367,500 J = 183,750 J

The kinetic energy gained by you and your bike at the bottom of the hill will be equal to the initial potential energy gained minus the potential energy lost due to air resistance.

Kinetic energy gained = (potential energy gained - potential energy lost)

Kinetic energy gained = (367,500 J - 183,750 J) = 183,750 J

The kinetic energy gained can be expressed as:

kinetic energy = 1/2 x mass x velocity^2

mass = 75 kg (combined mass of you and your bike)

velocity = unknown

Solving for velocity, we get:

velocity = sqrt((2 x kinetic energy) / mass)

velocity = sqrt((2 x 183,750 J) / 75 kg)

velocity ≈ 34.26 m/s

Therefore, you will be traveling at approximately 34.26 m/s (or about 123.3 km/h) at the bottom of the hill.

3. The final temperature of the bath water is approximately 9.68°C.

The specific heat capacity of water is 4.18 J/g°C. To calculate the final temperature of the bath water, we can use the equation:

heat gained by cold water = heat lost by hot water

The heat gained by the cold water (20.0 kg at 27.0°C) can be expressed as:

heat gained = mass x specific heat capacity x change in temperature

mass = 20.0 kg

specific heat capacity = 4.18 J/g°C

change in temperature = final temperature - initial temperature = final temperature - 27.0°C

The heat lost by the hot water (2.00 kg at 80.0°C) can be expressed as:

heat lost = mass x specific heat capacity x change in temperature

mass = 2.00 kg

specific heat capacity = 4.18 J/g°C

change in temperature = 80.0°C - final temperature

Since the heat gained and lost are equal, we can equate the two expressions and solve for the final temperature:

mass x specific heat capacity x (final temperature - 27.0°C) = mass x specific heat capacity x (80.0°C - final temperature)

20.0 kg x 4.18 J/g°C x (final temperature - 27.0°C) = 2.00 kg x 4.18 J/g°C x (80.0°C - final temperature)

83.6 x (final temperature - 27.0) = 8.36 x (80.0 - final temperature)

83.6 x final temperature - 83.6 x 27.0 = 668.8 - 8.36 x final temperature

91.96 x final temperature = 891.2

final temperature = 9.68°C

Therefore, the final temperature of the bath water is approximately 9.68°C.

To know more about thepotential energy, visit:

https://brainly.com/question/12807194

#SPJ1

Modest evidence suggests that young people who commit crimes deserve to service their entire lives in prison. Modicum demonstrates that despite the fact that children commit crimes, they do not merit the harsh punishment Dutton received while incarcerated.

The court stated that because of their youth, they are more impulsive, more susceptible to social pressure, and less able to see the repercussions of their actions. Their brains are also reportedly less developed. There are 79 of these juvenile killers alive today; they will all perish in jail.
Context is crucial when discussing juvenile punishment instances. The juvenile death sentence was abolished by the Supreme Court in 2005 on the grounds that children are not the same as adults. Younger people, according to the court, have brains that are actually less developed, are more impulsive, are more susceptible to social pressure, and are less able to see the effects of their actions.
To know more about Dutton go through:-

https://brainly.com/question/21463976

#SPJ4

to investigate the issue of juvenile offenders in the United States receiving life sentences without the possibility of release.

The article's primary goal is to draw attention to the problem of juvenile offenders in the United States receiving life sentences without the possibility of release. In this article, the impact of this sentencing strategy on juvenile offenders is examined, and the fairness of such sentences is questioned. The author's claim that these punishments are ineffectual and unjust is supported by data and evidence. The paper also urges a shift in strategy and offers substitutes that give young offenders priority in rehabilitation and restorative justice.

learn more about juvenile offenders here;

https://brainly.com/question/15245008

#SPJ4

The cycle of carbon and energy occurs in the food chain when the grass fixes atmospheric carbon through photosynthesis, the rabbit consumes the grass to obtain energy and organic carbon, and the rabbit's excrement decomposes and is buried in the ground.

Primary consumers are animals that only consume plant matter. Like cows, sheep, deer, and caterpillars, they are herbivores. Animals that eat main consumers are considered secondary consumers (herbivores).

For instance, grass generates its own nutrition from sunlight. A bunny consumes some grass. Eaten by a fox, the rabbit. As a fox dies, microbes decompose its remains and return it to the soil, where it feeds grass-like plants.

To know more about energy visit:-

https://brainly.com/question/11399976

#SPJ1

The object in the image is called an electromagnet

The strength of the magnetic field can be increased by increasing the number of turns.

An electromagnet is a type of magnet that is created by the flow of electric current through a coil of wire. Unlike a permanent magnet, which produces a magnetic field at all times, an electromagnet's magnetic field is created and maintained by the flow of current.

The strength of the magnetic field produced by an electromagnet depends on several factors, including the number of turns in the coil, the current flowing through the wire, and the material of the core (if one is used).

Learn more about electromagnet:https://brainly.com/question/3427992

#SPJ1

a) To find the capacitance needed to produce a resonant frequency of 1.00 GHz when using an 8.00 n-H inductor, you can use the formula for the resonant frequency:

f = 1 / (2 * pi * sqrt(L * C))

Where f is the resonant frequency, L is the inductance, and C is the capacitance. Rearranging the formula to find C:

C = 1 / (4 * pi^2 * f^2 * L)

Plugging in the values:

C = 1 / (4 * pi^2 * (1.00 * 10^9)^2 * (8.00 * 10^-9))
C ≈ 3.18 * 10^-15 F

So, you need a capacitance of approximately 3.18 pF to produce a resonant frequency of 1.00 GHz when using an 8.00 nH inductor.

b) To find the inductance needed to produce a resonant frequency of 60.0 Hz when using a 2.00 µF capacitor, you can use the same formula for the resonant frequency and rearrange it to find L:
L = 1 / (4 * pi^2 * f^2 * C)

Plugging in the values:
L = 1 / (4 * pi^2 * (60.0)^2 * (2.00 * 10^-6))
L ≈ 1.77 * 10^-3 H

So, you need an inductance of approximately 1.77 m-H to produce a resonant frequency of 60.0 Hz when using a 2.00 µF capacitor.

To know more about resonant frequency here :

https://brainly.com/question/13040523

#SPJ11

If the mass of the bob of a pendulum is increased by a factor of 2, then the period of pendulum motion will increase.

This can be explained by the formula for the period of a simple pendulum, which is T=2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity. We can see that the mass of the bob does not appear in this formula.

However, when we increase the mass of the bob, the pendulum will have a greater inertia, which means that it will require more time to swing back and forth between its two extreme positions. Therefore, the period of the pendulum will increase when the mass of the bob is increased by a factor of 2.

To know more about pendulum, here

brainly.com/question/30491687

#SPJ4

21 turns are required to generate a peak voltage of 160 V for a  coil with an area of 2.0 m² that rotates in a 0.010T magnetic field at a frequency of 60 Hz.

In order to determine the number of turns needed to generate a peak voltage of 160 V, we need to use the formula for the peak voltage of an alternating current (AC) generator. The formula is given as follows:

Vp = 2 * π * f * N * A * B

Where: Vp is the peak voltage, f is the frequency of rotation, N is the number of turns, A is the area of the coil, and B is the magnetic field strength.

The area of the coil is 2.0 m², the magnetic field strength is 0.010 T, the frequency of rotation is 60 Hz, and the peak voltage is 160 V.

We can substitute these values into the above formula to find the number of turns:

160 = 2 * π * 60 * N * 2.0 * 0.010

Simplifying:

160 = 7.54 N

Therefore:

N = 160 / 7.54

N ≈ 21.22

Thus, approximately 21 turns are needed to generate a peak voltage of 160 V.

To know more about peak voltage, refer here:

https://brainly.com/question/11629192#

#SPJ11

satellite is spinning at 6.0 rev/s. the satellite consists of a main body in the shape of a sphere of radius 2.0 m and mass 9725 kg, and two antennas projecting out from the center of mass of the main body that can be approximated with rods of length 3.0 m each and mass 10 kg. the antennas lie in the plane of rotation. 1,174,254.4 kg [tex]m^2[/tex]/s is the angular momentum of the satellite

To find the angular momentum of the satellite, first, you need to calculate the moment of inertia of each component (main body and antennas) and then multiply it by the angular speed.
Calculate the moment of inertia of the main body (sphere).
The moment of inertia of a sphere is given by the formula:

I = (2/5) x M x [tex]R^2[/tex]
Where M is the mass (9725 kg) and

R is the radius (2.0 m).
[tex]I_{main}[/tex] = (2/5) x 9725 x [tex]2^2[/tex] = 31120 kg [tex]m^2[/tex]

Calculate the moment of inertia of one antenna (rod).
The moment of inertia of a rod rotating about its end is given by the formula:

I = (1/3) x m x [tex]L^2[/tex]
Where m is the mass (10 kg) and L is the length (3.0 m).
[tex]I_{antenna}[/tex] = (1/3) x 10 x [tex]3^2[/tex] = 30 kg [tex]m^2[/tex]
Since there are two antennas, calculate the total moment of inertia of the antennas.
I_total_antennas = 2 x [tex]I_{antenna}[/tex]  = 2 x 30 = 60 kg [tex]m^2[/tex]
Find the total moment of inertia of the satellite by adding the main body and antennas' moment of inertia.
[tex]I_{total}[/tex] = [tex]I_{main}[/tex] + [tex]I_{antenna}[/tex]

[tex]I_{total}[/tex]  = 31120 + 60 = 31180 kg [tex]m^2[/tex]
Calculate the angular momentum (L) using the formula:

L = [tex]I_{total}[/tex]  x ω
Where ω is the angular speed (6.0 rev/s), and to convert it to radians per second, multiply by 2π:

ω = 6.0 x 2π = 37.68 rad/s
L = 31180 x 37.68 = 1174254.4 kg [tex]m^2[/tex]/s
The angular momentum of the satellite is 1,174,254.4 kg [tex]m^2[/tex]/s.

For similar question on angular momentum

https://brainly.com/question/4126751

#SPJ11

A helium burst is a very brief exergonic nuclear fusion of enormous quantities of helium into carbon using the triple-alpha mechanism that occurs inside the core of low mass stars (between 0.8 and 2.0 M).

The helium flash Helium fusion starts when the helium-rich core at the RGB's tip ignites. The star moves quickly to the Horizontal Branches region of the H-R diagram as a result of the core's ignition.

Helium flash refers to the sudden commencement of helium fission in a low-mass star's core. The star then stabilises and momentarily shrinks in size and brilliance. Fusion comes to an end when the core's supply of helium is depleted in planets with masses of up to twice that of the Moon or less.

To know more about nuclear visit:

https://brainly.com/question/18187269

#SPJ1

The current from the secondary coil when a step-down transform produces a voltage of 3 V across the secondary coil when the voltage across the primary coil is 120 with a current of 16 mA is 0.0004 A.

The step-down trаnsformer is defined аs а trаnsformer thаt converts high voltаge into low voltаge. Therefore, in the step-down trаnsformer, the voltаge in the secondаry coil is less thаn the voltаge in the primаry coil.

The trаnsformer formulа is given by,

Vp/Vs = Np/Ns

Where, Vp is the voltаge in the primаry coil, Vs is the voltаge in the secondаry coil, Np is the number of turns in the primаry coil, аnd Ns is the number of turns in the secondаry coil.

Reаrrаnging the formulа, we get

Is/Ip = Np/Ns = Vs/Vp

We know the voltаge аcross the secondаry coil is 3 V аnd the voltаge аcross the primаry coil is 120 V. Therefore,

Vs/Vp = 3/120 = 1/40

Current in the primаry coil = 16 mА = 0.016 А

Therefore,

Is/Ip = 1/40Is

= (1/40) × 0.016= 0.0004 А

Therefore, the current from the secondаry coil is 0.0004 А.

For more information about the current form refers to the link: https://brainly.com/question/10226193

#SPJ11

Answer:

To calculate the pressure exerted by water at the bottom of the tank, we need to use the formula:

Pressure = Density x Gravity x Height

where:

Density = 1000 kg/m³ (density of water)

Gravity = 9.81 m/s² (acceleration due to gravity)

Height = 12 m (height of the tank)

Substituting the values in the formula, we get:

Pressure = 1000 kg/m³ x 9.81 m/s² x 12 m

Pressure = 117,720 Pa (Pascals)

Answer:

6970 N

Explanation:

To calculate the average force exerted on the ball, we can use the impulse-momentum theorem, which states that the impulse on an object is equal to its change in momentum. In equation form:

Impulse = Δp

where Impulse is the force applied over a given time, and Δp is the change in momentum of the object.

We can calculate the momentum of the ball before the hit as:

p1 = m * v1

where m is the mass of the ball and v1 is its initial velocity (which we assume to be zero). Substituting the given values, we get:

p1 = (0.85 kg) * 0 m/s = 0 kg m/s

The momentum of the ball after the hit is:

p2 = m * v2

where v2 is the final velocity of the ball (82 m/s). Substituting the given values, we get:

p2 = (0.85 kg) * 82 m/s = 69.7 kg m/s

The change in momentum (Δp) is therefore:

Δp = p2 - p1 = 69.7 kg m/s - 0 kg m/s = 69.7 kg m/s

The impulse on the ball is equal to the change in momentum, so we have:

Impulse = Δp = 69.7 kg m/s

Finally, we can calculate the average force exerted on the ball using the formula:

Impulse = Force * time

Substituting the given values, we get:

69.7 kg m/s = Force * 0.01 s

Solving for Force, we get:

Force = 6970 N

Therefore, the average force exerted on the ball by the bat is 6970 Newtons.

This type of soil occur in temperate climates where rainfall is moderate to high (c)  pedalfer soil is correct option.

Thus (c ) is correct answer.

To know more about soil

https://brainly.com/question/12936553

#SPJ4

The gravitational field strength where the experiment was conducted is most nearly  0.30 N/kg.The coorect option is (c).To determine the gravitational field strength where the experiment was conducted, we can use the formula for the period of a pendulum:

T = 2π√(L/g),where T is the period of oscillation, L is the length of the pendulum, and g is the gravitational field strength. In this case, we are given the information that it took 81 seconds for the pendulum to oscillate 10 times, so the period T is 81/10 = 8.1 seconds. The length L of the pendulum is given as 0.5 meters.

We can rearrange the formula to solve for g:
g = L/(T^2/(4π^2))
Now, we can plug in the given values for T and L:
g = 0.5/(8.1^2/(4π^2))
g ≈ 0.5/(65.61/(4π^2))
g ≈ 0.5/(65.61/39.4784)
g ≈ 0.5/1.6611
g ≈ 0.3009 N/kg, Therefore, the gravitational field strength is most nearly 0.30 N/kg.

To know more about gravitational field click here

brainly.com/question/14906359

#SPJ11

When the magnitude of the magnetic field in an EM wave is doubled, the intensity of the wave doubles. The correct option is B.

Magnetic fields are a type of field that surrounds magnetic materials or charged particles in motion. When a charged particle moves, it generates a magnetic field, which can then exert force on other charged particles in the vicinity. The intensity of the wave is determined by the amplitude of the electric and magnetic fields in the electromagnetic wave.

Since intensity is proportional to the square of the electric and magnetic field's amplitude, doubling the amplitude of the magnetic field will result in a quadrupling of the intensity. However, in this case, only the magnitude of the magnetic field has been doubled.

As a result, the intensity of the wave would only double, not quadruple. When the magnetic field's magnitude is doubled, the electric field's amplitude remains constant, resulting in the intensity doubling as well. The correct answer is thus option B.

To know more about magnetic fields refer here:

https://brainly.com/question/3160109#

#SPJ11

The ideal mechanical advantage of the screw is 8.08.

The ideal mechanical advantage of a screw is determined by dividing the circumference of the screw by the thread width.

Circumference of screw = π × diameter of head = π × 0.812 cm

Thread width = 0.318 cm

Ideal mechanical advantage = Circumference of screw / Thread width

Ideal mechanical advantage = (π × 0.812 cm) / 0.318 cm

Ideal mechanical advantage = 8.08

Thus, the screw's ideal mechanical advantage is 8.08.

This means that for every rotation of the screw, it will move a distance of 8.08 times the thread width, making it easier to lift or move a heavy load. Ideal mechanical advantage is a theoretical concept, and the actual mechanical advantage may differ from it due to various factors such as friction and wear and tear of the screw.

To know more about mechanical advantage, refer here:

https://brainly.com/question/16617083#

#SPJ11

Venus rotates in a clockwise direction when viewed from above the north pole of the sun, which is unusual compared to most planets in our solar system.

Venus is unique among the planets in our solar system in that it rotates in the opposite direction of most planets. While most planets, including Earth, rotate counterclockwise when viewed from above the north pole of the sun, Venus rotates clockwise. In addition, Venus rotates very slowly, taking about 243 Earth days to complete one rotation.

This slow, retrograde rotation is thought to be the result of a collision with a massive object in the past, which caused the planet to flip over and start rotating in the opposite direction. Venus's unusual rotation is one of the many factors that make it a fascinating subject for scientific study.

To know more about Venus, here

brainly.com/question/18452664

#SPJ4