calcium electron configuration
Answer:
1s2 2s2 2p6 3s2 3p6 4s2
shorthand: [Ar] 4s2
Explanation:
the end number values are exponents, so 1s^2
why do you think the experimenter conducted this experiment in a lab rather than in the natural world, where this phenomenon was first observed?
Answer:
The experimenter observed this experiment in a lab rather than natural world because it might be dangerous to the atmosphere if he does the experiment in the natural world and it was still an hypothesis so that's why he did it in the lab.
How can one kg of iron melt more ice than 1 kg lead at 100 °C
Answer:
Due to the specific heat capacity of iron, 0.444 J/(g·°C), is more than the specific heat capacity for lead, 0.160 J/(g·°C)
Explanation:
The given parameters are;
The metals provided to melt the ice and their temperature includes;
One kg (1000 g) of iron;
Specific heat capacity = 0.444 J/(g·°C)
Temperature = 100°C
1 kg (1000 g) of lead
Specific heat capacity = 0.160 J/(g·°C)
Temperature = 100°C
Therefore, the heat provided to the ice of mass m, and latent heat of 334 J/g at 0°C by the metals are as follows;
For iron, we have;
ΔQ = Mass × Specific heat capacity × Temperature change
ΔQ[tex]_{iron}[/tex] = Heat obtained from the iron by the ice
ΔQ[tex]_{iron}[/tex] = 0.444 m × 1000 × (100 - 0) = 44400 J
Heat absorbed by the ice for melting, H[tex]_l[/tex] = Heat obtained from the iron
∴ Heat absorbed by the ice for melting, H[tex]_l[/tex] = Mass of ice × Latent heat of ice
H[tex]_l[/tex] = Mass of ice × 334 J/g = 44400 J
Mass of ice melted by the iron = 44400 J/334 (J/g) ≈ 132.9 g
Mass of ice melted by the iron ≈ 132.9 g
For lead, we have;
ΔQ = Mass × Specific heat capacity × Temperature change
ΔQ[tex]_{lead}[/tex] = Heat obtained from the iron by the ice
ΔQ[tex]_{lead}[/tex] = 0.160 m × 1000 × (100 - 0) = 16000 J
Heat absorbed by the ice for melting, H[tex]_l[/tex] = Heat obtained from the iron
∴ Heat absorbed by the ice for melting, H[tex]_l[/tex] = Mass of ice × Latent heat of ice
H[tex]_l[/tex] = Mass of ice × 334 J/g = 16000 J
Mass of ice melted by the lead = 16000 J/334 (J/g) ≈ 47.9 g
Mass of ice melted by the lead ≈ 47.9 g
Therefore, mass of ice melted by the iron, approximately 132.9 g, is more than mass of ice melted by the lead, approximately 47.9 g.
how would it affect your results if you use a wet Erlenmeyer flask instead of a dry one when transferring your acid solution from a volumetric pipette? pls someone answer pls
Explanation:
Your results would be effected because there is a possibility that the water and chemical substance added into the flask will combine, possibly creating a reaction, either making the solution stronger or weaker, or possibly just messing up your experiment in one go.
For example:
If I paint a picture, and I have a cup that I use in order to put paint in, but the cup is wet and I put my paint in it, my paint will become more liquefied due to the fact water has been added to it, messing the paint up.
How does the Nervous System control the
Circulatory System?
Some household cleaners come in concentrations stronger than necessary for basic cleaning jobs. Jeremy followed the instructions on a cleaning bottle and mixed enough cleaner with 4.0 L of water to form a 1.0 M cleaning solution. After testing his cleaning solution, he decided he should double to concentration for a tough stain. Jeremy added the same amount of cleaner and then added another 4.0 L of water to his bucket. Did Jeremy succeed in making a more concentrated solution? Explain why or why not. *
Answer:
no he just repeated the steps and made more of the same cleaner my guy
Explanation:
The ______,
who loved knowledge and built schools to help their people learn, were
foundational in the study of science.
A.French
B.Chinese
C.Romans
D.Greeks
During which change of state would the volume of a substance increase the most?
deposition
melting
vaporization
sublimation
Answer:
Correct option d = Sublimation
Explanation:
We know that gases occupy more volume as compared to the solid and liquid. Gases occupy all the available space.
In given option option D is correct because,
Sublimation is the process in which solid is directly converted into the gaseous phase without passing through liquid phase. So when substances under goes sublimation they are converted into gaseous form and occupy more space.
Oher options are incorrect because,
Deposition involve the conversion of gas into solid. Thus volume decreased. This option is incorrect.
Option B is also incorrect because,
Melting involve the conversion of solid into liquid. Volume increased as compared to solid state but not as much like in case of gases.
Option C is also incorrect because,
Vaporization involve the conversion of liquid into gaseous form. Volume also increase in this case but the volume increase in case of sublimation is higher than in case of vaporization that's why this is also incorrect.
Answer:
The correct answer is D. Sublimation
Explanation:
Edge 2020
the density of sulfuric acid is 1.84 g/mL. the mass of the sample is 25.0 what is the volume of L?
Answer:
Volume=46mL
Explanation:
density=1.84g/mL
mass=25.0g
volume=1.84×25
volume=46mL
What codes for the characteristics of an organism?
A None of the above
B) DNA in cells
The brain
D) The skin of an organism.
What volume of a popsicle will have a mass of 45g if the density is 10g/cm3 I NEED THE ANSWER ASAP
Answer:
The answer is 4.50 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question
mass = 45 g
density = 10 g/cm³
We have
[tex]volume = \frac{45}{10} = \frac{9}{2} \\ [/tex]
We have the final answer as
4.50 cm³Hope this helps you
A student designed an experiment to determine the effect of increasing the temperature of the solvent on the amount of
solute that could be dissolved. Which of the following would be the dependent variable?
A Temperature of the solute
Answer: A Temperature of the solute
Explanation:
(PLS HELP WORTH 50 POINTS)
Click or tap the storage container to transfer the displaced water to the 500 mL graduated cylinders, and determine
how much water was displaced by the football. Record this volume in Table B.
Answer:
there would be 4,300mL of diplaced water
for this all your expected to do is to add all of the volume in the containers together.
Bob rides his motorcycle with a constant speed of 116 km/h. How far can he travel in 1 hour?
Answer:
116 km/h
Explanation:
We know that km/h means Kilometers an hour. And if this is constant, then he will travel 116 km/h.
pls helppp
Calculate the frequency for a wavelength of 485 nm.
Answer:
299792458/(485x10^-9)=6.181x10^14Hz = 618.1THz
Frequency x Wavelength = Speed of Light
therefore
Speed of light / Wavelength = Frequency
View the model of the rover Curiosity.
Which classification best applies to this model?
very large
very small
very mathematical
very complex
Answer: very complex .
Explanation:
Answer:
very complex
Explanation: just took the test
are all metals magnetic?
✅Magnetic materials are always made of metal, but not all metals are magnetic. Iron is magnetic, so any metal with iron in it will be attracted to a magnet. Steel contains iron, so a steel paperclip will be attracted to a magnet too. Most other metals, for example aluminium, copper and gold, are NOT magnetic.
IamSugarBee
13. Based on the type of elements in the compound, are there ionic or covalent?
a. KCI
b. NO2
C. Cao
d AIF3
e. HF
f. NBr3
g. MgBr2
Answer:
c
Explanation:
Answer:
《●《HOPE IT HELPS YOU 》●》
ANS--> (C)
The Law of Conservation of Mass says that mass
can neither be
nor
A .Gained, lost
B. Created, destroyed
C. Started, ended
D. Opened, closed
Answer:
B
Explanation:
The Law of Conservation of Mass dates from Antoine Lavoisier's 1789 discovery that mass is neither created nor destroyed in chemical reactions. If we account for all reactants and products in a chemical reaction, the total mass will be the same at any point in time in any closed system.
6) Andy has left a bucket of smelly cheese porridge to cool down in the
Kitchen
a) Claire and Dagmar are sitting in the next room. Explain how the smell spreads to Claire's nose by diffusion.
hello!can anyone help?
Explanation:
the air particales are always moving so it also takes the smell of the chesse with it and sreads everywhere in the house.
1. CuCO^3------>CuO+CO^2 (g)
Word equation
State the characteristics or indications occurring in the above reaction
Answer:
A ----> A+B
Explanation:
CuCO3 is undergoing a decomposition reaction into the products copper(II) oxide and carbon dioxide gas.
what does a fusion reaction always create?
Answer:
In fusion reactions, two light atomic nuclei fuse together to form a heavier nucleus and release a large amount of energy.
Alt. Answer:
Fusion is the process that powers the sun and the stars. It is the reaction in which two atoms of hydrogen combine together, or fuse, to form an atom of helium. In the process some of the mass of the hydrogen is converted into energy.
Explanation:
lol the internet
Answer:
A fusion reaction creates two light atomic nuclei that fuse together to form heavier nucleaus and realease a large amount of energy.
Explanation:
Describe how the composition of gases changes as you travel up through Earth’s atmosphere
Explanation:
The composition of the gases never changes until the mesosphere and the thermosphere. -carbon dioxide, oxygen, and methane are only found in the troposphere. -Permanent gases stay the same until you reach the thermosphere.
1. Which of the following substances are elements? Explain
how you determined your answer.
(a) bronze
(b) tin
(C) chromium
(d) solder
(e) propane
(f) arsenic
(g) nickel
Substances that can be regarded as elements are;
Tin
Chromium
Arsenic
Nickel .
Chemical elements can be regarded as substance that are required to form compounds in chemical reactions.The elements in this question are Tin ,Chromium ,Arsenic ,Nickel, i can know this by checking the periodic table which gives the arrangements of all elements.Solder, Bronze can be regarded as alloy because it contains more than one metal element. Propane is a compound.Therefore, periodic table contains all the elements.
Learn more at:
https://brainly.com/question/18757696?referrer=searchResults
Coastal regions are often affected by abrasion what process would cause increased abrasion along a coastal region ?explain
Answer:
Coastal regions are often affected by abrasion. What process would cause increased abrasion along a costalregion? Abrasion is physical weathering caused by water, wind and gravity. The coastal regions areaffected by abrasion due to large volumes of water and increasedwinds.
Answer:
Hydraulic action of waves
Explanation: Coastal abrasion occurs as breaking ocean waves containing a sand and larger fragments erode the shoreline or headland. The hydraulic action of waves contributes heavily.
Mercury has a density of 13.6 g/mL. What is the volume occupied by 112.0 grams of mercury?
Answer:
The answer is 8.24 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass = 112 g
density of mercury = 13.6 g/mL
We have
[tex]volume = \frac{112}{13.6} \\ = 8.23529411...[/tex]
We have the final answer as
8.24 mLHope this helps you
How many atoms are in 32.84 g of B?
what is the molecular mass of Au
Answer:
196.96657 u
Explanation:
A change that produces matter with a different composition is a _______ change.
A change that produce matter with a different composition is a chemical change.
The element calcium forms the ion Ca2+. How many protons, Neutrons, and electrons does it have?
Answer:
18 electrons
20 neutrons
20 protons
Explanation: