One H2SO4 molecule has a 98 Atomic Weight Unit atomic mass. H2SO4 has an atomic mass of 98 grams per mole. One mole of H2SO4 is therefore present in 98 grams of H2SO4.
In chemistry, how is H2SO4 referred to?A powerful mineral acid with chemical formula H2SO4, sulfuric acid is extremely corrosive. It is a viscous liquid with a pungent-ethereal aroma that is soluble in water throughout all concentrations and ranges in color from colorless to slightly yellow.
Is H2SO4 an effective basic or acid?An extremely potent acid is sulfuric acid (H2SO4). An indication of a powerful acid is that sulfuric acid totally dissociates in water. Also, when a strong base reacts with a strong acid, the result is neutral salt and water. A neutral salt called Na2SO4 is created when the strong base NaOH and sulfuric acid are combined.
To know more about H2SO4 visit:
https://brainly.com/question/1120298
#SPJ1
What is the main idea of climates
Answer:What is the main idea of climates
Explanation:
The main idea of climates is that they are long-term patterns of weather conditions in a particular region. Climate is determined by various factors such as latitude, altitude, topography, ocean currents, and prevailing winds. These factors influence the amount of solar radiation received by a region, the distribution of temperature and precipitation, and the types of vegetation and animal life that can thrive in that area.
Climate is typically classified into different types based on temperature and precipitation patterns. The most commonly used classification system is the Köppen climate classification system, which divides climates into five major groups: tropical, dry, temperate, continental, and polar. Each group is further subdivided into more specific climate types based on additional factors such as seasonality and humidity.
Understanding climate is important for a variety of reasons. It helps us predict weather patterns and natural disasters such as hurricanes and droughts. It also plays a critical role in agriculture, water management, and energy production. Additionally, climate change has become an increasingly important topic in recent years as human activities have led to significant changes in global climate patterns.
The ozone hole over ________ is created in the ________ where there is more ________.
The ozone hole over Antarctica is created in the spring where there are more polar stratospheric clouds.
What is an ozone hole and how is it caused?
The ozone hole refers to a thinning of the protective layer of ozone in the Earth's stratosphere, which can lead to increased levels of harmful ultraviolet radiation reaching the Earth's surface. Ozone depletion is caused by the release of man-made chemicals called chlorofluorocarbons (CFCs), which are commonly used in refrigerants, air conditioners, and aerosol sprays. When CFCs are released into the atmosphere, they rise into the stratosphere, where they are broken down by the sun's ultraviolet radiation. This process releases chlorine and other chemicals, which can react with ozone molecules, breaking them apart and depleting the ozone layer.
The ozone hole over Antarctica is created in the spring (August to October) where there are more polar stratospheric clouds (PSCs) formed due to extremely cold temperatures. These clouds provide a surface for chemical reactions involving human-made chlorine and bromine gases, which destroy ozone molecules in the stratosphere.
Therefore, The ozone hole over Antarctica is created in the spring where there are more polar stratospheric clouds.
To learn more about ozone hole the link
https://brainly.com/question/520639
#SPJ1
A sealed flask contains
3.6 atm H2 gas and
1.8 atm O2 gas.
What is the total pressure in the
flask in atm?
Total Pressure, atm
Considering the Dalton's partial pressure, the total pressure in the flask is 5.4 atm.
Definition of Dalton's partial pressureThe pressure exerted by a particular gas in a mixture is known as its partial pressure.
Dalton establishes that, at a stable temperature, the total pressure of a mixture of gases that do not chemically react with each other is equal to the sum of the partial pressures that each of its components would exert:
[tex]P_{T}[/tex]=P₁ + P₂ + ... + Pₙ
where n is the amount of gases present in the mixture.
This relationship is due to the assumption that there are no attractive forces between the gases.
Total pressure in the flaskIn this case , you know:
[tex]P_{H_{2} }[/tex]= 3.6 atm[tex]P_{O_{2} }[/tex]= 1.8 atmThe total pressure in the flask is calculated as:
[tex]P_{T}[/tex]=[tex]P_{H_{2} }[/tex] + [tex]P_{O_{2} }[/tex]
Substituting the corresponding values:
[tex]P_{T}[/tex]=3.6 atm + 1.8 atm
Solving:
[tex]P_{T}[/tex]=5.4 atm
Finally, the total pressure is 5.4 atm.
Learn more about Dalton's partial pressure:
brainly.com/question/30263250
#SPJ1
Please someone explain me this
1 and 2 are oxidation reactions.
What is an oxidation reaction?
An oxidation reaction is a type of chemical reaction that involves the transfer of electrons from one substance to another. Oxidation reactions are characterized by an increase in the oxidation state of a molecule, atom, or ion, resulting in a loss of electrons.
The substance that loses electrons is said to be oxidized, while the substance that gains electrons is said to be reduced.
Oxidation reactions play important roles in many chemical and biological processes, including energy production, metabolism, and corrosion.
Learn more about oxidation reaction:https://brainly.com/question/19528268
#SPJ1
In a laboratory 24 grams of propane (C3H8) is combusted in a sealed container with 55 grams of oxygen. 19.65 mL of water is collected. What is the percent yield for this reaction?
***you must write a balanced equation first
****density of water is 1g/1mL
PLEASE HELP
Answer:
25.0 grams of propane (C3H8) reacts with 25.0 grams of oxygen according to the following equation: C3H8 (g) + 5O2 (g) arrow 3CO2 (g) +...
Explanation:
Find the number of moles in 450 grams of copper (Cu)
Answer:
7.08 moles
Explanation:
To find the number of moles of copper in 450 grams, we need to divide the given mass by the molar mass of copper.
The molar mass of copper can be found on the periodic table, and it is approximately 63.55 grams per mole.
So, the number of moles of copper in 450 grams is:
450 grams / 63.55 grams per mole = 7.08 moles
Sometimes during PCR, the forward and reverse primers stick to each other forming a 'primer-dimer" which is then copied in subsequent cycles and may appear as an extra band on your gel. Is primer-dimer
more or less likely to happen in a PCR reaction that uses long primers? Why?
Optimizing the PCR annealing temperature and MgCl2 concentration can also help minimize primer-dimer formation.
What is PCR?
PCR stands for Polymerase Chain Reaction, which is a laboratory technique used to amplify specific DNA sequences. PCR enables the amplification of a small amount of DNA into millions or billions of copies, allowing researchers to study DNA samples even when only a small amount of starting material is available.
PCR works by using a heat-stable DNA polymerase enzyme to copy a targeted DNA sequence in a series of repeated cycles of heating and cooling. The process involves three main steps: denaturation, annealing, and extension.
Primer-dimer formation is more likely to occur in a PCR reaction that uses long primers.
Longer primers have a higher likelihood of binding to each other through complementary base pairing, forming a primer-dimer. This can occur when the primers anneal to each other rather than to the template DNA. The resulting primer-dimer complex can then be extended by the DNA polymerase during subsequent PCR cycles, leading to the amplification of an unintended product that appears as a smaller band on the gel.
Learn more about PCR from given link
https://brainly.com/question/7177771
#SPJ1
A student is making a solution of NaCl in water. If the student uses 6.72 grams of NaCl and enough water to make 2.14 liters of solution, what is the molarity of the student's salt solution?
Molarity of the solution with 6.72 g of NaCl dissolved in 2.14 liters is 0.051 mol per liter.
MolarityM stands for moles of solute per liter of solution.The source of the NaCl moles isMoles = grams of sodium chloride / molecular weight.NaCl has a 58.5 g molecular weight.Moles= 6.72/ 58.5A mole of NaCl equals 0.11 moles. the value in the molatity formula being substitutedNaCl molarity is equal to moles of NaCl per liter of solution.Molarity is 0.051 mol per liter.In terms of the amount of material per unit volume of solution, molar concentration is a measurement of the concentration of a chemical species, specifically a solute in a solution. The most frequent measure of molarity in chemistry is the number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units.For more information on molarity kindly visit to
https://brainly.com/question/8732513
#SPJ1
TASK 1 Metals A, B and B are given. Metal A is a stronger reducing agent than B. Metal B can displace metal 5 from solutions of its salts, but does not react with solutions of salts of A. Arrange metals A, B and In reducing their reduction capacity. We select om POAM two triplets meta- Au, koumo meet these conditions.
Here, the metal A displaces metal B from its solution. Hence, the metal A has lower positive reduction than B. Hence, the reduction potential of B is higher and it is less strong reducing agent.
What is reduction potential ?The reduction potential of a metal electrode is the measure of the tendency of it to lose or gain electrons and is the equilibrium potential difference developed due to separation of charges at the metal - solution interface when a metal is kept in contact with solution of its own.
The higher the negative reduction potential, greater the reducing capacity of the metal. Hence, metals with higher positive potential are easily reducing or they are strong oxidizing agents.
The metals with strong reducing power displaces other metals with lower reducing power from their solution. Here, A is strong reducing agent. Hence, it can displace B from its salt solution and B reduces to its metallic form.
Therefore, the order of A and B in reducing their reduction capacity is A>B.
Find more on reduction potential:
https://brainly.com/question/23881200
#SPJ1
How would you name this?
*Grade 12 organic chemistry*
According to IUPAC nomenclature, the longest chain of this compound contains 7 carbons. Hence, the name of this compound is 4 -propyl-5-ethyl-5-phenyl heptane.
What is IUPAC nomenclature?IUPAC rules are used to name the organic compounds. As per this rule, the compound is named based on the chain containing highest number of carbon atoms. The substituents are named with their prefix or suffix.
For the given compound, the longest chain contains 7 carbon atoms. Hence, the chain is named as heptane. The substituents are numbered in such a way that, they have the least possible number.
The 4th carbon contains a propyl group and a phenyl group and ethyl groups are attached on the 5th position in the longest chain. Therefore, the name of the compound is 4 -propyl-5-ethyl-5-phenyl heptane.
Find more on IUPAC rules:
https://brainly.com/question/27915542
#SPJ1
what is the molarity of a solution that contains 6.71 moles of solute in 23.5 L of solution
M=6.71mol2L=2. 5mol/L. 23.5 m o l / L . Hence, the correct that is 2.5M is the molarity of a solution that contains 6.71 moles of solute in 23.5 L of solution
What is the solute's molality in the solution?A solution's molality (m) is defined as the moles of solute divided by the kilograms of solvent. A "one-molal" solution of sodium chloride is one that comprises 1.0mol of NaCl dissolved in 1.0kg of water. Molality is represented by an italicized lower-case m.
A solution's molality equals the moles of solute divided by the mass of solvent in kilograms, whereas its molarity equals the moles of solute divided by the volume of solution in liters.
learn more about solution's molality
https://brainly.com/question/24065939
#SPJ1
Indicate whether the compound is binary ionic (BI), binary covalent (BC), multivalent (MM) or acid (A). Then name the compound.
The compound is an acid
Why is H2SO4 and acid?
H2SO4, or sulfuric acid, is an acid because it donates protons (H+ ions) in aqueous solution. When H2SO4 is dissolved in water, it dissociates into hydrogen ions (H+) and sulfate ions (SO4 2-).
The hydrogen ions are the source of the acidity in the solution, as they can react with water molecules to form hydronium ions (H3O+). The hydronium ions are responsible for the characteristic sour taste and corrosive properties of acids.
Sulfuric acid is used in a wide range of industrial processes, including the production of fertilizers, detergents, and chemicals.
Learn more about acid:https://brainly.com/question/14072179
#SPJ1
What type of chemical reaction is ammonia + oxygen -> nitric acid + water?
The type of chemical reaction of ammonia + oxygen -> nitric acid + water is a combustion reaction.
What is the chemical reaction?The chemical reaction between ammonia (NH₃) and oxygen (O₂) to form nitric acid (HNO₃) and water (H₂O) is an oxidation-reduction reaction, specifically a combustion reaction.
The balanced chemical equation for this reaction is:
4NH₃ + 5O₂ → 4NO + 6H₂O
followed by the oxidation of NO to form NO₂ and then the formation of nitric acid by the reaction of NO₂ with water:
2NO + O₂ → 2NO₂
3NO₂ + H₂O → 2HNO₃ + NO
So, while the overall reaction involves oxidation and reduction, the formation of nitric acid involves an acid-base reaction.
Learn more about chemical reaction here: https://brainly.com/question/25769000
#SPJ1
(PLEASE HELP) You push really hard against a round rock, but you cannot make it roll. Which statement best explains why you cannot move the rock? A Gravity pulls the rock toward the center of Earth. B The forces between you and the rock are balanced. c The force of your push is greater than the opposing force. d There is no friction to help you move the object.
Answer: The forces between you and the rock are balanced
Explanation:
Answer: your answer is A.)
Explanation:
Classify the minerals into the different types of silicates.
a. Pyrope.
b. Tourmaline.
c. Actinolite.
d. Zoisite.
e. Enstatite.
f. Natrolite.
g. Talc.
Answer:
Silicate minerals are the most common of Earth's minerals and include quartz, feldspar, mica, amphibole, pyroxene, and olivine. Silica tetrahedra made up of silicon and oxygen, form chains, sheets, and frameworks, and bond with other cations to form silicate minerals.
Explanation:n
2 moles of NO, was placed in an empty I dm' bottle and allowed to reach equilibrium according to the equation:
At equilibrium, 1.2 moles of N,O, dissociated. Calculate the value of the equilibrium constant for the reaction at that
temperature.
The following equation represents a laboratory preparation for oxygen gas: 2KClO3 (s) —------> 2KCl (s) + 3O2 (g)
If 4 moles of oxygen are produced how many moles of potassium chloride are produced?
Answer: 2.67 moles KCl.
Explanation:
4 moles O2 X 2 moles KCl / 3 moles O2 =2.67
Explain solubility of sugar and carbon dioxide in water
Answer:
Sugar and carbon dioxide have different solubilities in water due to their different chemical properties and intermolecular forces.
Sugar (sucrose) is a polar molecule that can form hydrogen bonds with water molecules. This allows sugar to dissolve readily in water, as the water molecules surround the sugar molecules and form a solution. However, the solubility of sugar in water is limited, as the water molecules can only form a certain number of hydrogen bonds with the sugar molecules. This is why, for example, if you add too much sugar to a cup of water, the excess sugar will not dissolve and will settle at the bottom of the cup.
Carbon dioxide (CO2), on the other hand, is a nonpolar molecule that does not have a charge distribution that allows it to interact strongly with water molecules through hydrogen bonding. Instead, carbon dioxide dissolves in water through weak intermolecular forces, such as van der Waals forces, which arise from temporary dipoles that form as the molecules move and interact with each other. These weak interactions make carbon dioxide only moderately soluble in water, and the solubility decreases as the temperature increases or the pressure decreases.
In summary, the solubility of sugar and carbon dioxide in water depends on the chemical properties and intermolecular forces of the substances, with sugar being more soluble due to its polar nature and ability to form hydrogen bonds with water, and carbon dioxide being less soluble due to its nonpolar nature and weak intermolecular interactions with water.
Explanation:
islare a component of food that your body requires large amounts of to support your survival.
If Jake have type 1 diabetes then he needs insulin cells because his body cannot make insulin protein.
What is diabetes?
Diabetes is a chronic, metabolic disease characterized by elevated levels of blood glucose (or blood sugar), which leads over time to serious damage to the heart, blood vessels, eyes, kidneys and nerves.
The most common diabetes symptoms experienced by many people with diabetes are increased thirst, increased urination, feeling tired and losing weight. In Type 1 diabetes, body cannot make insulin whereas in type 2 diabetes, body can make insulin but can't use it properly.
Therefore, if Jake have type 1 diabetes then he needs insulin cells because his body cannot make insulin protein.
Learn more about diabetes, here:
https://brainly.com/question/30770821
#SPJ9
Answer the following questions thoroughly.
1. The atmosphere is composed of four different layers: the troposphere, the
stratosphere, the mesosphere, and the thermosphere. (12 points)
A. What are the temperatures (cold, warm, or hot) found in each layer of the
atmosphere? (8 points)
B. Where is the ozone layer and what is its function? (2 points)
C. Where is the ionosphere and what is its function? (2 points)
1) The troposphere is cool while the stratosphere, mesosphere and the thermosphere are hot.
2) The ozone layer is in the stratosphere
3) The ionosphere is in the thermosphere.
What are the layers of the atmosphere?This is the lowest layer of the atmosphere, extending from the Earth's surface up to about 7-20 kilometers (4-12 miles) depending on the location. This is where weather occurs, and it is where we live and breathe. Temperature decreases with height in the troposphere.
The thermosphere is the fourth layer of the atmosphere, extending from about 85-600 kilometers (53-373 miles) above the Earth's surface. This layer is characterized by high temperatures due to absorption of solar radiation, and it is also where the auroras occur.
Learn more about atmosphere:https://brainly.com/question/26767532
#SPJ1
1. Are chromosomes bigger or smaller than proteins?
2.How would you describe the sizes Proteins and chromosomes to a friend
Answer:by brig correct
Explanation:
Pls I need help urgently pls. Search the Lewis dot structure for water and ethanol and examine the structures and identify which part is partial negative and partial positive.
Answer:
The oxygen atom in water is partially negative and the hydrogen atoms are partially positive. In ethanol, the oxygen atom is partially negative and the carbon and hydrogen atoms are partially positive.
2. math! At 3 P.M., a dry-bulb thermometer
reading is 66°F. The wet-bulb reading is 66°F.
What is the relative humidity? Explain.
Answer:
In order to determine the relative humidity from dry-bulb and wet-bulb thermometer readings, we need to use a psychrometric chart or a calculation based on the difference between the two temperatures.
In this case, the dry-bulb temperature and the wet-bulb temperature are the same (66°F). This indicates that the air is fully saturated with water vapor, meaning that the relative humidity is 100%.
When the dry-bulb and wet-bulb temperatures are the same, the air is said to be at its dew point temperature. At this temperature, the air is holding as much moisture as it can, and any additional cooling will cause condensation to occur. This is why surfaces can become covered in dew when the temperature drops at night.
In summary, when the dry-bulb temperature and the wet-bulb temperature are the same, the air is fully saturated with water vapor and the relative humidity is 100%.
PLEASE HELP
You perform an electrolysis of NaCl and collect one of the products in a test tube. You realize later you did not label the test tube. You dip a strip of pH paper into the test tube and get no reaction. You dip a dry strip of damp pH paper into the tube and it turns white. You hold a lit match near the mouth of the test tube and get no reaction. Which product is in the test tube?
A. Oxygen gas
B. Hydrogen gas
C. Sodium hydroxide (NaOH)
D. Chlorine gas
Answer:
Answer = 'A' => Sodium Hydroxide (NaOH)
Explanation:
Aqueous electrolysis of salt solutions finds the salt ions in competition with electrolysis of water at the respective electrodes. That is, water can undergo reduction at the cathode as can the cation of the salt; while at the anode water can undergo oxidation as can the anion of the salt. The competing reactions are as follows:
Cathode:
Cation + electrons => Reduced form of metal in Basic Standard State
H₂O(l) + 2e⁻ ⇄ 2OH⁻(aq) + H₂(g)
Anode:
Anion ⇄ Basic Standard State element + electrons
2H₂O(l) ⇄ O₂(g) + 4H⁺(aq) + 4e⁻
Na⁺ + e⁻ => Na⁰(s); εo = -2.71v
2H₂O(l) + 2e⁻ ⇄ 2OH⁻(aq) + H₂(g); εo = -0.83v (Dominant Rxn at cathode – more positive value)
At the Anode:
Cl⁻(aq) => Cl₂(g) + 2e⁻; εo = 1.36v
2H₂O(l) => O₂(g) + 4H⁺ + 4e⁻; εo = 1.23v (Dominant Rxn at anode – more positive value)
Since the more dominant reaction at the cathode produces hydroxide ions, the solution would become alkaline with Na⁺ ions already present. NaOH will effect the change in color of red litmus to blue. The gases produced in the half-reactions would have evaporated and not be present for flame test.
The distinction can be determined by comparing the 'Standard Reduction Potentials' of the half-reactions. At the cathode (site of reduction), the more positive electrode potential will dominate while at the anode (site of oxidation) the more negative electrode potential will dominate.
For NaCl(s) => Na⁺(aq) + Cl⁻(aq) finds the ions in competition with the oxidation and reduction reactions of water.
At the Cathode:
In terms of the enviornment-what do you think? Which one worse, releasing HCI, CO, and phogene gas into the air or releasing vinyl chloride? Think about what you learned in environmental science about how things in the atmosphere move through the other spheres, and how toxins can spread though the environment. a about whether you think the EPA made the right decision, and back up your answer with data.
Both releasing HCl, CO, and phosgene gas into the air and releasing vinyl chloride can have harmful effects on the environment and human health.
What is high concentration ?
High concentration refers to a large amount or a high proportion of a substance in a given mixture or environment. The specific threshold for what constitutes a high concentration depends on the context and the particular substance involved.
What is EPA ?
The Environmental Protection Agency (EPA) is an independent agency of the United States federal government, established in 1970 to protect human health and the environment. The EPA is responsible for setting and enforcing regulations related to air and water quality, waste management, hazardous materials, and other environmental issues.
To know more about phosgene gas visit:-
https://brainly.com/question/14887665
#SPJ1
How many moles of iron (II) chloride will be formed upon the complete reaction of 28.5 of iron with excess hydrochloric acid?
It should be 0.789 moles because we started with 28.8 g x 1 mol/36.5 g = 0.789 moles
The elementary gas-phase reaction
(CH3)3COOC(CH3)3 → C2H6 + 2CH3COCH3
A → B + 2C
is carried out isothermally at 400 K in a flow reactor with no pressure drop. The specific reaction rate at 50°C is 10–4 min–1 (from pericosity data) and the activation energy is 85 kJ/mol. Pure di-tert-butyl peroxide enters the reactor at 10 atm and 127°C and a molar flow rate of 2. 5 mol/min, i. E. , FA = 2. 5 mol/min.
(a) Use the algorithm for molar flow rates to formulate and solve the problem. Plot FA, FB, FC, and then X as a function of plug-flow reactor volume and space time to achieve 90% conversion.
(b) Calculate the plug-flow volume and space time for a CSTR for 90% conversion
The molar flow rate of feed Fao = 2.5 mol/min
Performance equation for cstr gas phase first order reaction with conversion Xa = 0.9
A --> B + 2C
Volume expansion factor E =( 3-1)/1 = 2
Reaction rate constant at 50 C, k1 = 10-4 min-1
Activation energy Ea = 85 kj/mol
Entering pressure P= 10 atm
Temperature T2 = 127 C = 400k
Cao = P2/RT2 = 10 atm/(0.0821L.atm/mol.k)*400k = 0.3045 mol/L
By Arrhenius equation
Ln(k2/k1) = Ea/R *(1/T1 - 1/T2)
Ln(k2/10-4) = 85000/8.314*(1/323 - 1/400)
k2 = 1.77*10-4 min-1
The molar flow rate of feed Fao = 2.5 mol/min
Performance equation for cstr gas phase first order reaction with conversion Xa = 0.9
V/Fao = *Xa/(-rA) = Xa(1+EXa)/kCao(1-Xa)
V = Fao*Xa(1+EXa)/k2Cao(1-Xa)
V = 2.5*0.9(1+2*0.9)/1.77*10-4*0.3045(1-0.9)
V = 1168881 L = 1168.88 m3
volume of the reactor V = 1168.88m3
space time of the reactor,
Tou = V/vo = VCao/Fao= 1168881L*(0.3045mol/L)/(2.5mol/min) = 142369.74 min
b) reaction is reversible then,
Kc = [B][C]2/[A]
Kc = 0.025 mol2/dm6
Kc = CaoXae * (2*CaoXae)2/Cao(1-Xae)
0.025 = 4*0.30452Xae3/(1-Xae)
Xae3/(1-Xae) = 0.066
Put Xae = 0.35then it satisfies above equation
0.353/(1-0.35) = 0.0659
equilibrium conversion Xae = 0.35
Read more about molar flow rates here:
https://brainly.com/question/13348162
#SPJ1
How are advancements in chemistry related to technology?
PLEASE BE ACCURATE! Thank you very much!:)
Advancements in chemistry have played a critical role in advancing technology in a number of ways such as ;
PharmaceuticalsEnergyNanotechnologyWhat is the relationship of advancements in chemistry to technology?Overall, advancements in chemistry are essential for developing new technologies and improving existing ones. By understanding the fundamental properties of materials and substances, chemists can create new materials with unique properties and develop new technologies that can improve our lives.
In term of Energy, Chemistry is crucial for developing new forms of energy, including renewable energy sources like solar, wind, and biofuels. Chemistry also plays a vital role in energy storage, such as the development of high-capacity batteries and fuel cells.
In term of Pharmaceuticals, Chemistry is essential for developing new drugs and improving existing ones. For example, the development of new cancer drugs has revolutionized cancer treatment, and new antibiotics have been developed to combat drug-resistant bacteria.
In term of Nanotechnology, Chemistry is critical for the development of nanotechnology, which involves working with materials at the nanoscale. Nanotechnology has many potential applications, including in electronics, medicine, and energy storage.
Learn more about technology at:
https://brainly.com/question/25110079
#SPJ1
Halley's comet takes 5 years to complete an orbit
The given statement is false . Halley's comet takes 5 years to complete an orbit.
A comet that shines especially brightly is a superb comet. Big comets typically arrive once every ten years, at random, erratic periods.
This translates to a circumference of the solar orbit of around 7.6 billion miles. The gravitational pull of the planets causes the period to change from appearance to appearance.
Because Halley was the first comet to show astronomers that comets might return to our night skies repeatedly, it is frequently referred to as the most famous comet. The comet's appearances have now been connected by astronomers to observations made more than 2,000 years ago.
To know more about comet
https://brainly.com/question/12443607
#SPJ4
The complete question is
Halley's comet takes 5 years to complete an orbit. true or false.
math! A 5-liter container of crude oil spills in
the ocean. It has a mass of 4.10 kg. What is its
density? If 1 liter of ocean water has a density
of 1.03 kg, does the crude oil sink or float?
Explain.
Answer: The crude oil will float on the surface of the ocean water.
Explanation:
The density of the crude oil can be calculated by dividing its mass by its volume:
Density = mass / volume
Since the crude oil spilled from a 5-liter container and has a mass of 4.10 kg, its density can be calculated as:
Density = 4.10 kg / 5 L
Density = 0.82 kg/L
The density of ocean water is given as 1.03 kg/L. Since the density of crude oil is less than that of ocean water, the crude oil will float on the surface of the water. This is because less dense substances float on top of denser substances. Therefore, the crude oil will float on the surface of the ocean water.