in a collision, a 25.0kg mass moving at 3.0m/s transfers all of its momentum to a 5.0kg mass. What is the velocity of the 5.0kg mass after the collision?
Answer:
Explanation:
The 25.0 kg mass has momentum before the collision of
p = 25.0(3.0) = 75 kg•m/s
If all this momentum gets transferred into a 5.0 kg mass, the velocity of the 25.0 kg mass will be zero and the velocity of the 5.0 kg mass will be
75 / 5.0 = 15.0 m/s
Getting this to occur will require an addition of a significant amount of energy via an internal explosion or release of spring potential energy. This can be shown by looking at kinetic energies.
Initial system kinetic energy is ½(25.0)3.0² = 112.5 Joules
After the collision, system kinetic energy is ½(5.0)25² = 1,562.5 Joules
so 1562.5 - 112.5 = 1450 Joules of energy must be released during the collision to complete this scenario.
The most efficient energy transfer without energy release is an ideal elastic collision. Had these two masses been in such a collision with the given initial conditions, the 5 kg mass would have moved away at 5.0 m/s taking with it 5(5) = 25 kg•m/s of momentum leaving the 25 kg mass with 75 - 25 = 50 kg•m/s of momentum and a velocity of 50/25 = 2.0 m/s. Both masses are now traveling in the same direction as the original velocity, but at different speeds. Notice kinetic energy is conserved in elastic collisions
½(25)2² + ½(5.0)5² = 112.5 Joules.
The only time one mass can transfer its entire momentum to another mass without additional energy addition or subtraction is when the two colliding masses are identical in magnitude. Think pool balls colliding on a table.
what is the distance between a(-6,3),b(-2,4),c(-8,3)
Answer:
Explanation:
Appears to be the vertexes of a triangle.
AB = √(-6 - (-2))² + (3 - 4)²) = √17
AC = √(-6 - (-8))² + (3 - 3)²) = 2
BC = √(-2 - (-8))² + (4 - 3)²) = √37
A 3000 kg car stops at a red light, and is rear-ended by a 5000 kg truck traveling at 20m/s. In the collision, the two cars stick together. What is the final speed of the two cars just after the collision in m/s (Numeric Answers only)
Explanation:
this is actually not as simple as it sounds here.
quite some energy is lost in the deformation of the bodies of car and truck, and it also needs more energy to get a standing object going than to accelerate an already moving object.
but assuming the simple described circumstances, then the energy and impulse of the moving truck of 5000 kg is transferred to a new combined system of car and truck of now 5000 + 3000 = 8000 kg.
so, the 20m/s inertia energy of the truck is now distributed to the truck/car combination.
since the same energy has to move now more mass, it is clear that the combined speed will be lower.
20×5000 = x×8000
20×5 = x×8
x = 100/8 = 12.5 m/s
that is the resulting speed of the combined truck/car object.
Fossils show that some animals _____.
are extinct
had not seen rain
liked the cold
made noise
Answer:I think Fossils show that some animals are extinct
Explanation:
Please mark as brainliest for me.Thanks
The displacement of an object in SHM is described by the equation
[tex] x = cos\binom{2\pi}{3}t[/tex]
where x is in meters and t in seconds. Determine the velocity of the object at t = 0.6 s.
Answer:
[tex]-1.99\:\mathrm{m/s}[/tex]
Explanation:
Assuming that the equation is intended to be [tex]\displaystyle x=\cos\left(\frac{2\pi}{3}t\right)[/tex], we can find the velocity vs. time equation by taking the first derivative with respect to [tex]t[/tex]:
[tex]\displaystyle \frac{dx}{dt}=\frac{d}{dt}\left(\cos\left(\frac{2\pi}{3}t\right)\right)[/tex]
Recall the chain rule:
[tex]\displaystyle f(g(x))'=f'(g(x))\cdot g'(x)[/tex]
Therefore,
[tex]\displaystyle \frac{d}{dt}\left(\cos\left(\frac{2\pi}{3}t\right)\right)=-\sin\left(\frac{2\pi}{3}t\right)\cdot \frac{2\pi}{3}[/tex]
Therefore, the velocity vs. time equation of the object is [tex]\displaystyle v=-\sin\left(\frac{2\pi}{3}t\right)\cdot \frac{2\pi}{3}[/tex].
Substitute [tex]t=0.6\text{ s}[/tex] into this equation to find the velocity at that given time:
[tex]\displaystyle v=-\sin\left(\frac{2\pi}{3}(0.6)\right)\cdot \frac{2\pi}{3}\approx \boxed{-1.99\text{ m/s}}[/tex]
What is the intensity level for a sound of Intensity 10-⁶w/m²
Iron and nickel are examples of _______ materials
Content From May net
Answer:an iron-nickel alloy or nickel -iron alloy abbreviated FeNi or NiFe is a group of alloys consisting primarliy of the elemtns nickel and iron.
Explanation:
Answer:
Iron and nikel are example of "Metal" materials.
A block slides down an incline plane that makes a 30 degree angle with the
horizontal. If the coefficient of kinetic friction is 0.3. Calculate the acceleration of the block.
Hi there!
We know that:
Force due to gravity = Mgsinθ
Force due to friction = μMgcosθ
Let the positive direction be directed in the direction of the block's acceleration, which is downward.
Thus:
ΣF = Mgsinθ - μMgcosθ
Solving for acceleration requires diving all terms by the mass, so:
a = gsinθ - μgcosθ
Substitute in given values. (g = 9.8 m/s²)
a = 9.8sin(30) - 0.3(9.8)cos(30) = 2.354 m/s²
A football is kicked with a velocity of 5 m/s at an angle of 53° above the horizontal. What is its speed at the
maximum height?
A) 3 m/s
B) 6 m/s
C) 9 m/s
D) 12 m/s
E) 15 m/s
An object starts from rest and uniformly accelerates at a rate of 1.25 m/s2 for 7.0 seconds.
(a) What is the object's displacement during this 7-second time period?
(b) What is the object's final velocity?
(c) How many seconds does it take the object to have a displacement of 22 meters?
Explanation:
Since its accelerating, the velocity vs time graph is linear
For displacement we need initial velocity (which is zero because it starts from rest) and final velocity (which is calculatee thro acceleration formula
A= (vf - vi)/t
a= vf-0/t
1.25=vf / 7
1.25*7=vf
8.75 = vf
Now for displacement plug all the values in
X = 1/2(vf-vi)/t formula
The displacement (x) is 30.625 m
For part 3, we know new displacement that is 22m , the final and initial velocities are the same so just plug in the values for same formula above
The answer is t = 5.02
Im pretty sure all the answers are correct
find charge and charge density on the surface of a conducting sphere of radius 15.2cm where potential at 215 v
this is the correct answer
A 10 kg box initially at a speed of 10 m/s accelerates uniformly to a speed of 20 m/s in 2
seconds. Determine the
A. energy gained by the block
Answer:
What Um Sorry Where's The Answer?....
How do I do these three parts ?what are the answers I’ve been trying for days
Answer:
Explanation:
ASSUMING the clay is moving horizontally and friction is negligible.
momentum is mass times velocity
9a)
m₁v + m₂(0) = m₁vf + m₂vf
m₁v = (m₁ + m₂)vf
vf = m₁v / (m₁ + m₂)
9b)
ASSUMING the positive direction is also the original direction of the clay ball
m₁v + m₂vb = (m₁ + m₂)vf
vf = (m₁v + m₂vb) / (m₁ + m₂)
9c)
vf = (0.37(25) + 4.6(3.4)) / (0.37 +4.6)
vf = (9.25 + 15.64) / 4.97
vf = 5.0080482897...
vf = 5.0 m/s
Select the correct answer.
The motion of a car on a position-time graph is represented with a horizontal line. What does this indicate about the car's motion?
OA
It's not moving
ОВ.
It's moving at a constant speed.
OC. It's moving at a constant velocity.
OD. It's speeding up.
Reset
Next
Answer:
A.It’s not moving.
Explanation:
Position-Time graphs display the motion of a object by showing the changes of velocity with respect to time.
The motion of a car on a position-time graph that is represented with a horizontal line indicates that the car has stopped moving.
A straight line with a positive slope indicates that the car is moving at a constant velocity, and thus the slope is constant. On the other hand, a curve with a changing slope, shows that the velocity is changing.
A player kicks a soccer ball.
What is the reaction force?
A. The ball pushes back on the player's
foot.
B. The ground pushes back on the player.
C. The ground pushes back on the ball.
Answer:
the ground pushes back on the player
Answer:
c
Explanation:
force is every where so anything that goes up must come down
There are 6 foundation of sports and which one you think is the most important?
I just need the points
Explanation:
But just pick any and say something like "it stans out to me most/more" or "it sounds/looks more intristing to me"
Câu 1. Trong dao động điều hoà, phát biểu nào sau đây là không đúng ?
A.Cứ sau một khoảng thời gian T (chu kì) thì vật lại trở về vị trí ban đầu.
B.Cứ sau một khoảng thời gian T thì vận tốc của vật lại trở về giá trị ban đầu.
C.Cứ sau một khoảng thời gian T thì gia tốc của vật lại trở về giá trị ban đầu.
Cứ sau một khoảng thời gian T thì biên độ của vật lại trở về giá trị ban đầu
Answer:
whatttttttttttt
Explanation:
the ಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠಠᴥಠ
A man with a mass of 60 kg rides a bike with a mass of 13 kg. What is the force needed by the man to accelerate the bike at 0.90 m/s2?
Which of the following formulas describes the change in momentum of an
object?
A. change in momentum = force x time over which force is applied
B. change in momentum = acceleration distance over which
acceleration is applied
C. change in momentum = force x distance over which force is
applied
O D. change in momentum = acceleration time over which
acceleration is applied
Which of the following is the current best hypothesis for the formation of the solar system?
A. Formed by an exploding super nova star which then collapsed and coalesced into a spinning
disk forming Sun and planets
B. Our solar system has always been here and has never changed
C. Formed from the Sun’s explosion releasing particles into space forming planets and other
objects
D. Our solar system was formed by a great collision of other stars with one another
Answer:
A
Explanation:
all galaxies exploded in order to create the sun/stars
The first motor abilities a new born exhibits are
Answer:
here your answer
i am sorry if wrong
Give two examples of contact and non-contact forces and explain why they are contact and non-contact forces respectively.
The Two examples of contact forces are:
frictional force Contact force.The two examples of non contact forces are:
Gravitational forcemagnetic force.Contact forces happens due to the contact between two objects
Non Contact forces happens because there is no contact between two objects. There is no attraction.
Shearing is done in case of Processing of __________ ( Silk / Wool / Jute ).
Answer:
wool maybe, I was a bit confused in silk and wool but wool
What forces act on an airplane to keep it in the air? If the airplane is traveling at a constant velocity, what could be said about the magnitudes of the forces?
Let's see
[tex]\\ \sf\longmapsto \overrightarrow{drag}[/tex]
[tex]\\ \sf\longmapsto \overleftarrow{Thrust}[/tex]
[tex]\\ \sf\longmapsto Lift\:Force\uparrow[/tex]
[tex]\\ \sf\longmapsto Acceleration\:due\:to\: gravity\downarrow[/tex]
Net force is 0
How can stretching affect the range of motion of the neck? Hypothesis
Answer:
reduce passive stiffness and increase range of movement during exercise.
Explanation:
stretching performed as part of a warm up prior to exercise is thought to reduce passive stiffness and increase range of movement during exercise. in general it appears that is static stretching is most beneficial for athletes requiring flexibility for their sports.
Once you start pulling your object with less force than friction, what should you expect your object to do? What about when your object is pulled with more force than friction?
NO LINK S
#Case -1
If Pulling force is less than frictional force the object won't move .
#Case-2
If Pulling force is greater than frictional force then object will be .
In order to calculate friction force you need Limiting friction first .
[tex]\\ \sf\longmapsto F_L=\mu sN[/tex]
u s is coefficient of static friction and N is normal reaction
Or
[tex]\\ \sf\longmapsto F_L=\mu smg[/tex]
As N=mgThe volume of an ideal gas is increased from 0.6 m3 to 2.4 m3 while maintaining a constant pressure of 1000 Pa (1000 N/m2). Determine, in J, the amount of work done by the gas in this expansion.
The amount of work done by the gas in the given expansion is 1800 J.
The given parameters;
initial volume of the ideal gas, V₁ = 0.6 m³final volume of the ideal gas, V₂ = 2.4 m³constant pressure of the gas, P = 1000 PaThe amount of work done by the gas in the given expansion is calculated as follows;
W = PΔV
where;
ΔV is the change in volume of the gasSubstitute the given parameters and solve for the work done;
W = 1000(2.4 - 0.6
W = 1800 J
Thus, the amount of work done by the gas in the given expansion is 1800 J.
Learn more here:https://brainly.com/question/14978695
Which of the following is the least important factor of a personal fitness program? A. the individual's personal conditions B. the availability of resources C. the level of motivation D. the time of day physical activity will be performed Please select the best answer from the choices provided. A B C D Mark this and return
Answer:
I think it's B
Explanation:
I think its trying to tell you that no matter who you are you could still do regular fitness but I don't know♀️
Ano ang mangyayari kung hindi mo gagamitin ang iyong talento?
Answer:
mas lalo kang tinatamaran magaral
a person on a bike (m=90 kg) is traveling 4 m/s at the top of a 2 m hill. what is the bikers total energy?
A) 1,944 J
B) 2,484 J
C) 1,764 J
D) 720 J
Answer:
720 J
Explanation:
Kinetic Energy = 1/2 * m *(v*v)
M= 90 kg
V=4 m/s
KE=1/2 * 90 * (4*4)
KE= 45*16= 720 J
[tex]\frac{m}{s}[/tex]Answer: D) 720 J
Explanation:
Given : m=90kg
Total Energy = K. E. + P. E. =[tex]\frac{1}{2}[/tex][tex]mv^{2}[/tex]+mgh
Since bike is present over a surface of Earth (top of hill) hence h=0m.
Therefore,
Total Energy= [tex]\frac{1}{2}[/tex]*90kg*[tex](4m/s)^{2}[/tex]+(90kg)*(9.81[tex]\frac{m}{s}^2[/tex])x(0)
= 720 J
Hence total energy of bike is equal to 720 J