your car (mass 1500 kg) has broken down, and you're pushing it to the side of the road. how much work do you have to do to get the car moving 0.5 m/s, if it starts from rest? give your answer in j.

Answers

Answer 1

Answer:

the answer is 0.5

Explanation:


Related Questions

object a is a conductor. it is neutral. it is touched by a negatively-charged, conducting sphere. when the sphere is pulled away, what charge does object a have?

Answers

Object A will have a negative charge when it is touched by a negatively charged, conducting sphere.

We need to first understand the properties of conductors and charges.

What is a conductor?

A conductor is a material that allows electric charges to flow freely through it. In other words, it has low resistance to electric current. Most metals, such as copper and aluminum, are good conductors.

What is a charge?

An electric charge is a fundamental property of matter. It is an electrical property of the atomic particles (such as electrons and protons) that make up matter. Charges can be either positive or negative.

What happens when a conductor is touched by a charged object?

When a charged object touches a conductor, the charge spreads out evenly over the surface of the conductor. This is called electrostatic induction. If the conductor is neutral, it will become charged. If the conductor is already charged, the charge will distribute itself evenly over the conductor's surface.

This happens because charges of the same type repel each other and charges of the opposite type attract each other. When the charged object is pulled away, the charge on the conductor remains.

What charge does object a have?

In this scenario, object A is a neutral conductor. When it is touched by a negatively charged sphere, the negative charge spreads out evenly over the surface of the conductor. This means that object A becomes negatively charged. When the sphere is pulled away, the negative charge on object A remains.

Therefore, the charge on object A is negative.

To know more about charges, refer here:

https://brainly.com/question/11944606#

#SPJ11

A softball has kinetic energy of 81 j as it flies across home plate at a velocity of 30 m/s. calculate the mass of the softball.

Answers

A softball weighs 0.18427 kg. Its average rebound height on concrete, grass, and wood is 80.8 cm, 75.3 cm, or 87.6 cm, respectively. Kinetic energy 81 multiplied by a speed of 30 m/s and mass equals 2430.

What is mass, for instance?

The amount of matter inside an item is referred to as mass in mathematics. The most common way to determine mass is to weigh something. Anything will weigh more the more matter it contains. For instance, a mouse will have a higher mass than an ant since it contains more stuff.

Of what mass?

The quantity of substance contained within an item is expressed in terms of mass. Typically, mass is expressed in kilogrammes (kg) or grammes (g) (kg). No matter where in the cosmos it is or how much gravitational force is exerted on it, mass is a measure of how much matter there is.

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ1

a 70-cm-diameter wheel rotating at 1200 rpm is brought to rest in 15 s. calculate its angular acceleration

Answers

The angular acceleration is -1.33 revolutions per second.

The angular acceleration can be calculated using the following formula:
Angular acceleration (α) = (Final angular velocity - Initial angular velocity) / Time


Initial angular velocity = 1200 revolutions per minute (rpm) = 20 revolutions per second (rps)
Final angular velocity = 0 revolutions per second (rps)
Time = 15 seconds
Angular acceleration (α) = (0 - 20) / 15 = -1.33 revolutions per second squared (rps2)

Moreover, the temporal rate at which angular velocity changes is known as angular acceleration. The standard unit of measurement is radians per second per second. Therefore, = d d t. Rotational acceleration is another name for angular acceleration. A rigid body's points all share the rotating velocity and acceleration. Here, The rotation is in the clockwise direction and the angular acceleration is negative.

To know more about angular acceleration, refer here:

https://brainly.com/question/29428475#

#SPJ11

a spherical shell and a solid sphere (both of the same total mass) are rotating about a diameter at the same angular frequency and with the same rotational kinetic energy. what is the ratio of the spherical shell radius to the solid sphere (i.e., rspherical shell/rsolid sphere)?

Answers

Answer:

I (shell) = 2/3 M R^2

I(sphere) = 2/5 M R^2

I(shell) / I(sphere) = (2/3) / (2/5) = 5/3

R(shell) / R(sphere) = (5/3)^1/2 = (15)^1/2 / 3

As you found in Part A, your weight will be greater than normal when the elevator is moving upward with increasing speed. For what other motion would your weight also be greater than your normal weight?
The elevator moves downward while slowing in speed.

Answers

In the other motion,  your weight also be greater than your normal weight if the elevator moves downward while slowing in speed, then the weight of the person would also be greater than the normal weight.

What is the normal force of an object?

The normаl force is the perpendiculаr force thаt opposes the weight of аn object in contаct with а surfаce. The normаl force equаls the object's weight only in situаtions where the object is directly on а horizontаl surfаce or the incline аngle is 0 degrees.

The force exerted by аn object perpendiculаr to а surfаce thаt prevents the object from sinking into the surfаce is referred to аs the normаl force. When аn object is plаced on а surfаce, the surfаce responds by exerting а force thаt is perpendiculаr to the object's weight. Аnother motion thаt would аlso result in your weight being greаter thаn your normаl weight is when the elevаtor moves downwаrd while slowing in speed. This occurs due to the аccelerаtion of the person within the elevаtor.

Learn more about normаl force:

https://brainly.com/question/15000546

#SPJ11

Two balls, each with a mass of 0. 5 kg, collide on a pool table. Is the law of conservation of momentum satisfied in this collision? Explain why or why not

Answers

In the given collision scenario, the law of conservation of momentum is not satisfied, indicating the idealized nature of perfectly elastic collisions.

To determine whether the law of conservation of momentum is satisfied in this collision, we need to calculate the total momentum of the system before and after the collision and see if they are equal.

If we assume that the two balls are moving in opposite directions with the same speed, then their momenta before the collision are:

p₁ = m₁v₁ = (0.5 kg)(v) and p₂ = m₂v₂ = -(0.5 kg)(v)

where v is the speed of the balls, and the negative sign for p₂ indicates that it is in the opposite direction.

The total momentum before the collision is:

p_before = p₁ + p₂ = (0.5 kg)(v) - (0.5 kg)(v) = 0

This means that the total momentum of the system before the collision is zero.

After the collision, the two balls will stick together and move with a common speed. Let's assume that their final speed is v_f.

The total momentum after the collision is:

p_after = (m₁ + m₂)*v_f = (0.5 kg + 0.5 kg)v_f = 1 kgv_f

Since the two balls stick together and move with a common speed, the momentum is conserved and the total momentum after the collision is equal to the total momentum before the collision:

p_before = p_after = 0 = 1 kg*v_f

This is a contradiction, as there is no value of v_f that satisfies this equation. Therefore, the law of conservation of momentum is not satisfied in this collision.

In reality, the collision between the two balls would not be perfectly elastic, and some energy would be lost to friction and other factors. This would result in a partial loss of momentum, and the law of conservation of momentum would be approximately satisfied, but not exactly.

Learn more about mass here: brainly.com/question/19694949

#SPJ4

what physics factor contributes to the accuracy of a fired bullet

Answers

Answer:
The bullet accuracy is influenced by a combination of factors, including bullet spin, shape, design, muzzle velocity, air resistance, and the shooter's skill and technique.

Explanation:
Several physics factors contribute to the accuracy of a fired bullet, but one of the most important factors is the bullet's stability in flight. This stability is primarily determined by the following aspects:

Bullet spin: When a bullet is fired, it is spun by the rifling (spiral grooves) inside the barrel of the gun. This spin imparts a gyroscopic stability to the bullet, helping it maintain a stable and consistent trajectory in flight.

Bullet shape and design: The shape and design of the bullet also play a significant role in its accuracy. Aerodynamic bullets with a streamlined shape are more stable in flight, as they reduce air resistance and minimize the effects of crosswinds.

Muzzle velocity: The speed at which the bullet leaves the barrel, known as muzzle velocity, can also impact accuracy. Higher muzzle velocities generally lead to flatter trajectories, which can make it easier to hit targets at longer distances. However, too high a muzzle velocity may cause instability and reduced accuracy.

Air resistance and drag: As the bullet travels through the air, it experiences air resistance and drag, which can cause it to slow down, lose stability, and deviate from its intended path. Factors such as altitude, humidity, and wind can influence air resistance and, consequently, bullet accuracy.

Shooter's skill and technique: The skill and technique of the person firing the bullet also play a crucial role in the accuracy of a fired bullet. Proper trigger control, sight alignment, and breath control can significantly impact the accuracy of the shot.

The physics factor that contributes to the accuracy of a fired bullet is its stability in flight, which depends on several factors including its velocity, spin, and shape.

What is the difference between velocity and spin?

Velocity and spin are two different concepts that are related to the motion of an object.

Velocity refers to the rate at which an object changes its position in a particular direction over time. In other words, velocity is a vector quantity that has both magnitude (speed) and direction, and it is often expressed in units of meters per second (m/s) or kilometers per hour (km/h). Velocity can be positive or negative, depending on the direction of the object's motion.

Spin, on the other hand, refers to the rotation of an object around its axis. When an object spins, it rotates around a fixed point or axis, and it can have a variety of different spin rates or angular velocities. Spin is often measured in units of revolutions per minute (RPM) or radians per second (rad/s).

In some cases, velocity and spin can be related. For example, in sports like baseball, the spin of a ball can affect its trajectory and the way it moves through the air. A baseball pitcher can throw a pitch with backspin or topspin, which will cause the ball to curve or drop in a particular way as it travels towards the batter. In this case, the spin of the ball can be used to control its velocity and direction, and to deceive the opposing team.

Here in the Question,

The velocity of the bullet, or its speed, is important for accuracy because it determines the distance that the bullet will travel in a given amount of time. A faster bullet will cover more distance in a shorter amount of time, which can make it more difficult to aim accurately. On the other hand, a bullet that is too slow may not have enough momentum to travel a long distance or penetrate a target effectively.

The spin of the bullet is also crucial for stability in flight. Most bullets are designed with a spiral groove pattern on the inside of the barrel, which causes the bullet to spin as it travels through the air. This spin stabilizes the bullet by causing it to rotate around its longitudinal axis, which helps to counteract any irregularities or disturbances in the air. A bullet that is not spinning or is spinning too slowly can be more prone to wobbling or tumbling in flight, which can reduce accuracy.

Finally, the shape of the bullet can also affect its stability in flight. Bullets that are streamlined and have a high ballistic coefficient, or resistance to air resistance, will maintain their velocity and trajectory better than bullets with a more irregular shape. Additionally, a bullet that is too long or too short for its caliber can be unstable in flight and can affect accuracy.

Therefore, the accuracy of a fired bullet depends on a combination of factors, including its velocity, spin, and shape, which must be carefully optimized to ensure consistent and reliable performance.

To learn more about Kinetic Energy click:

brainly.com/question/26472013

#SPJ2

if a 100.0 g object needs 1145 joule to increase temperature by 10.0 what's it's specific heat capacity

Answers

The specific heat capacity of the object is 1.145 J/(g°C)

The specific heat capacity of the object can be calculated using the formula:

specific heat capacity = (energy required)/(mass x change in temperature)

In this case, the energy required to increase the temperature of the object by 10.0 degrees Celsius is 1145 J, the mass of the object is 100.0 g, and the change in temperature is 10.0 degrees Celsius.

specific heat capacity = (1145 J)/(100.0 g x 10.0 °C)

specific heat capacity = 1.145 J/(g°C)

Therefore, the specific heat capacity of the object is 1.145 J/(g°C). This means that it takes 1.145 joules of energy to raise the temperature of 1 gram of the object by 1 degree Celsius.

To know more about specific heat , here

brainly.com/question/11297584

#SPJ4

What is responsible for the weather changes on Earth?

Answers

Answer: Geological records show that there have been a number of large variations in the Earth's climate. These have been caused by many natural factors, including changes in the sun, emissions from volcanoes, variations in Earth's orbit and levels of carbon dioxide (CO2).

For a shorter answer: changes in the sun, emissions from volcanoes, variations in Earth's orbit and levels of carbon dioxide (CO2).

assume ω = 13.0 rad/s . what is the magnitude v of the velocity of the particle in m/s ?

Answers

Given Angular velocity ω = 13.0 rad/s, magnitude v of the velocity of the particle in m/s = 13 m/s.

Explanation:

The formula used to calculate the linear velocity of a particle that is rotating at a distance from a fixed point at an angular velocity of ω radians per second is given as, v = r * ω.

Where, v = Linear velocity of a particle that is rotating at a distance r from a fixed point, r = Distance from the fixed point, ω = Angular velocity of the particle. Substituting the given values in the formula, v = r * ω= 1 * 13= 13 m/s. Therefore, the magnitude v of the velocity of the particle in m/s is 13 m/s.

To know more about circular motion, visit:

https://brainly.com/question/2285236

#SPJ11

Use a 10mH inductor to design a low-pass passive filter with a cutoff frequency of 1600rad/s. a) Specify the cutoff frequency in hertz. b) Specify the value of the filter resistor. c) Assume the cutoff frequency cannot decrease by more than 10%. What is the smallest value of load resistance that can be connected across the output terminals of the filter? d) If the resistor found in (c) is connected across the output terminals, what is the magnitude of H(jω) when ω=0 ?

Answers

Use a 10mH inductor to design a low-pass passive filter with a cutoff frequency of 1600rad/s.

a) To specify the cutoff frequency in hertz, you can use the formula:
f = ω / 2π
where f is the frequency in hertz, and ω is the frequency in radians per second.

Given the cutoff frequency of 1600 rad/s, you can calculate the frequency in hertz as follows:
f = 1600 / (2 * π) ≈ 254.65 Hz

b) To specify the value of the filter resistor, use the formula:
R = 1 / (ω * L)
where R is the resistor value, ω is the cutoff frequency in rad/s, and L is the inductor value.

Given the cutoff frequency of 1600 rad/s and an inductor value of 10mH (0.01 H), the resistor value can be calculated as follows:
R = 1 / (1600 * 0.01) ≈ 0.0625 Ω

c) To find the smallest value of load resistance that can be connected across the output terminals of the filter without decreasing the cutoff frequency by more than 10%, you can use the following formula:

R_ load_ min = R / ((1 - 0.9) * (1 + 0.9))
Given the resistor value calculated in (b) is 0.0625 Ω:
R_ load_ min = 0.0625 / ((1 - 0.9) * (1 + 0.9)) ≈ 3.125 Ω

d) If the resistor found in (c) is connected across the output terminals, the magnitude of H(jω) when ω=0 can be calculated using the formula:
H(jω) = R_ load / (R + R_ load)

Given the resistor values calculated in (b) and (c):
H(jω) = 3.125 / (0.0625 + 3.125) ≈ 0.9804

So, the magnitude of H(jω) when ω=0 is approximately 0.9804.

To know more about frequency in hertz  here :

https://brainly.com/question/19614632

#SPJ11

A planet whose mass is half of the mass of Earth and radius equal to the radius of the Earth, the acceleration due to gravity on the surface of the planet would be-

Answers

A planet whose mass is half of the mass of Earth and radius equal to the radius of the Earth, the acceleration due to gravity on the surface of the planet would be  19.6m/s².

Large, circular celestial objects that are neither stars nor their remnants are known as planets. The nebular hypothesis, which states that an interstellar cloud collapses out of a nebula to create a young protostar orbited by a protoplanetary disc, is currently the best theory for planet formation. The formula for the acceleration caused by gravity on earth's surface is,

g = GM/R

Now, Mp = M/2

Rp = R/2

The planet's gravitational acceleration is,

gp =  GMp/Rp

gp = (GM/2)/(R²/4) = 2g

gp = 2 × 9.8 = 19.6m/s²

Therefore, the acceleration due to gravity on the surface of the planet will be 19.6m/s².

To know more about  planet

https://brainly.com/question/13598381

#SPJ4

In which part of the wave are the particles of the medium closer together?A.rarefactionsB.compressionsC.solidsD.liquids

Answers

In the wave, the particles of the medium are closer together in B. compressions.

Particles in a compressional wave compress and expand in the direction of wave propagation. In a compressional wave, when a force is exerted on one end of the chain of particles, it is transferred from one particle to the next, resulting in a disturbance in the medium that spreads outward. As a result, compressions and rarefactions travel through the medium, causing the particles to be either close together or far apart.

In a compressional wave, the particles in the medium vibrate parallel to the direction of wave propagation. This is due to the fact that the direction of particle movement in a compressional wave is in the same direction as the wave's motion. The particles in the medium are closer together in compressions, whereas they are further apart in rarefactions. The reason for this is that the particles in a medium are pushed together by the wave's pressure and then pushed apart as the wave continues. Therefore, the correct option is B.

Know more about Particles here:

https://brainly.com/question/30670889

#SPJ11

How is communication important in a science experiment?
(simple but detailed answer)

Answers

In order to ensure that everyone on the team is aware of the goals, rules, and steps involved in the science experiment, communication is crucial. It permits the transparent exchange of information and thoughts.

Why is dialogue crucial in experiments?

The chance to get input from stakeholders, experts, and other people with a professional or academic interest in the topic is provided by the presentation of your research findings.

Why is dialogue a crucial component of the science process?

Science gains support, understanding of its broader relevance to society is promoted, and it encourages more informed decision-making at all levels, from government to communities to individuals, when scientists are able to effectively communicate outside of their peer group.

To know more about science experiment visit:-

https://brainly.com/question/23064221

#SPJ1

Electron diffraction
21.
a) The table below shows four statements that may or may not be true about the wave nature
of the electron. Place a tick next to the statement if it is correct and cross if it is incorrect.
Electron can be diffracted by matter. This confirms their wave nature.
The wavelength of the electron is given by the de Broglie equation
The wave associated with a moving electron is an electromagnetic wave
The kinetic energy of the electron is given by the equation E = hf
b) Calculate the speed of a carbon atom of mass 2.0 x 10-26 kg travelling in space with a de
Broglie wavelength of 6.8 x 10-26 m.

Answers

a) The correct statements are: Electron can be diffracted by matter. This confirms their wave nature.

The wavelength of the electron is given by the de Broglie equation.

The incorrect statements are:

The wave associated with a moving electron is an electromagnetic wave.

The kinetic energy of the electron is given by the equation E = hf.

b) The de Broglie wavelength of a particle is given by the equation:

λ = h / p

where λ is the wavelength, h is Planck’s constant, and p is the momentum of the particle. The momentum of the carbon atom is given by:

p = mv

where m is the mass of the carbon atom and v is its velocity. Substituting the given values, we get:

p = (2.0 x 10⁻²⁶kg) v

λ = h / p

λ = h / (2.0 x 10⁻²⁶ kg) v

Substituting the given value of λ, we get:

6.8 x 10⁻²⁶ m = (6.626 x 10⁻³⁴ J s) / (2.0 x 10⁻²⁶kg) v

Solving for v, we get:

v = (6.626 x 10⁻³⁴ J s) / (2.0 x 10⁻²⁶ kg) (6.8 x 10⁻²⁶ m)

v = 1.62 x 10³ m/s

Therefore, the speed of the carbon atom is 1.62 x 10³ m/s.

To know more about wave nature, visit :

https://brainly.com/question/29469813

#SPJ1

What is a common rock that can be dissolved by water and weak acids? A. quartzite. B. quartz-rich sandstone. C. limestone. D. all of these

Answers

The common rock that can be dissolved by water and weak acids is limestone. Hence, the correct option is (C) limestone.

Limestone is a sedimentary rock that is made up primarily of calcium carbonate (CaCO3) mineral. It is composed of calcite mineral and often contains fossils of marine organisms like shells, coral, and mollusks, making it an important rock type in the construction of buildings.Limestone is easily dissolved by water and weak acids. Because of its calcite content, it is very susceptible to acid rain's erosive effects. When dissolved in water or acid, limestone can be transformed into the chemical compound calcium bicarbonate. Calcium bicarbonate is a soluble material that can be transported by water.

More on rocks: https://brainly.com/question/5396842

#SPJ11

How is the force of attraction dependent on the masses of objects and distance between them?

Answers

The force of attraction between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between them.

The force of attraction between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers. This is known as the inverse-square law of gravitational attraction. Mathematically, this can be expressed as F = G(m1m2)/d^2, where F is the force of attraction between the two objects, G is the gravitational constant, m1, and m2 are the masses of the two objects, and d is the distance between their centers. Therefore, the greater the masses of the objects, the stronger the force of attraction between them. Similarly, the farther apart the objects are, the weaker the force of attraction between them. This fundamental relationship is what governs the behavior of celestial bodies in space and is crucial for understanding many natural phenomena in our universe.

learn more about inverse-square law here:

https://brainly.com/question/31104318

#SPJ4

A motor moves a belt that is attach to an axle of a solid flywheel. The radius of the axle r = 3.25 cm and the radius of the larger solid flywheel is R = 27.4 cm. What is the tangential velocity of the outer edge of the fly wheel assuming the belt has linear velocity of 45.0 m/s?​

Answers

Explanation:

We can start by using the fact that the linear velocity of the belt is equal to the tangential velocity of the flywheel at the point where the belt contacts it. We can use this to find the tangential velocity of the outer edge of the flywheel using the ratio of the radii.

Let's call the tangential velocity of the outer edge of the flywheel "v". Then we have:

v / 45.0 m/s = R / r

where R is the radius of the flywheel and r is the radius of the axle. We can rearrange this to solve for v:

v = (45.0 m/s) * (R / r)

Substituting in the given values for R and r, we get:

v = (45.0 m/s) * (27.4 cm / 3.25 cm)

Converting the radius to meters:

v = (45.0 m/s) * (0.274 m / 0.0325 m)

Simplifying:

v = 379.6 m/s

Therefore, the tangential velocity of the outer edge of the flywheel is approximately 379.6 m/s

a 5.0 gram piano wire spans 44.0 cm. to what tension must this wire be stretched to ensure that its fundamental mode vibrates at the d4 note (f = 293.7 hz)? (enter your answer in in n.)

Answers

Tension required to make the 5.0 gram piano wire vibrate at the D4 note is approximately 268,679.21 N.

Let's discuss it further below.

To find the tension required to make a 5.0 gram piano wire with a length of 44.0 cm vibrate at the D4 note (f = 293.7 Hz), follow these steps:

1. Convert the given mass and length to SI units.
Mass (m) = 5.0 g = 0.005 kg
Length (L) = 44.0 cm = 0.44 m

2. Use the formula for the fundamental frequency of a vibrating string:
f = (1/2L) * sqrt(T/μ), where T is the tension and μ is the linear mass density.

3. Calculate the linear mass density (μ) using the given mass and length:
μ = m / L = 0.005 kg / 0.44 m = 0.01136 kg/m

4. Rearrange the formula for the fundamental frequency to solve for tension (T):
T = (2L * f)² * μ

5. Plug in the values and calculate the tension:
T = (2 * 0.44 m * 293.7 Hz)² * 0.01136 kg/m
T = (517.968)² * 0.01136 kg/m
T = 268679.21 N

Therefore, the tension required to make the 5.0 gram piano wire vibrate at the D4 note is approximately 268,679.21 N.

Learn more about mass density (μ).

brainly.com/question/14485913

#SPJ11

What two things must be present for a wave to form ?

Answers

Waves come in two kinds, longitudinal and transverse. Transverse waves are like those on water, with the surface going up and down, and longitudinal waves are like of those of sound, consisting of alternating compressions and rarefactions in a medium.
Waves come in two different kinds, longitudinal and transverse. Longitudinal waves are like of those sounds, consisting of alternating compressions and rarefactions in a medium. Transverse waves are like those on water with the surface going up and down

A student moves a 222.0 newton table by lifting it above their head in
7.0 seconds, the student is 2 meters tall. How many joules of work did
the student do?

Answers

Work = 222 cm x 2. The joule 444(J), sometimes known as the newton metre (N m), is the Si derived unit for work. The work required to move an item 2 metres with 1 N much force is measured in joules.

How much work does one joule equal?

The work performed by a force from one newton acting via one metre is equivalent to one joule, a unit of work of energy in the Internacional System of Units (SI). Its name honours English physicist William Prescott Joule and its equivalent in ergs is 107, or around 0.7377 foot-pounds.

How many newtons is one joule?

The work (or heat expended) by the a force with one newton (N) operating more than a distance of 1 m is equivalent to one joule (m). A force of one newton causes a mass of one kilogramme (kg) to accelerate by one m per second (s) every second. Thus, one joule is equivalent to one newton metre.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ1

work function of the metal.
10. Photons of electromagnetic radiation having energies of 1.0 eV, 2.0 eV and 4.0 eV are incident on a
metal surface having a work function of 1.7 eV.
a) Which of these photons will cause photoemission from the metal surface?
b) Calculate the maximum kinetic energies (in eV and J) of the liberated electrons in each of
those cases where photoemission occurs.

Answers

Answer:

a) A photon with energy greater than or equal to the work function of the metal will cause photoemission.

From the given data, the work function of the metal is 1.7 eV. Therefore, photons with energies of 2.0 eV and 4.0 eV will cause photoemission, but the photon with an energy of 1.0 eV will not.

b) The maximum kinetic energy (KEmax) of a liberated electron is given by:

KEmax = E(photon) - work function

where E(photon) is the energy of the incident photon.

For the photon with an energy of 2.0 eV:

KEmax = 2.0 eV - 1.7 eV

KEmax = 0.3 eV

In joules:

KEmax = (0.3 eV)(1.602 x 10^-19 J/eV)

KEmax = 4.81 x 10^-20 J

For the photon with an energy of 4.0 eV:

KEmax = 4.0 eV - 1.7 eV

KEmax = 2.3 eV

In joules:

KEmax = (2.3 eV)(1.602 x 10^-19 J/eV)

KEmax = 3.69 x 10^-19 J

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

a tank, shaped like a cone has height meter and base radius meter. it is placed so that the circular part is upward. it is full of water, and we have to pump it all out by a pipe that is always leveled at the surface of the water. assume that a cubic meter of water weighs , i.e. the density of water is . how much work does it require to pump all water out of the tank? enter the exact value of your answer.

Answers

The work required to pump all the water out of the tank is [tex](1000/3)\pi g[/tex] J.

The volume of a cone can be calculated using the formula:

[tex]V = (1/3)\pi r^2h[/tex]

where r is the base radius, h is the height, and π is the mathematical constant pi.

Assuming the base radius of the cone is 1 meter and the height is 1 m.

In this case, the tank is full of water, so its volume is:

[tex]V = (1/3)\pi (1^2)(1) = (1/3)\pi[/tex]

The mass of the water in the tank is its volume times its density:

[tex]m = V\rho = (1/3)\pi (1000) = (1000/3)\pi[/tex]

To pump out the water, we need to lift it to the top of the tank, which has a height of 2 meters. So the work required is:

[tex]W = mgh = (1000/3)\pi g\ J[/tex]

Where g is the acceleration due to gravity.

Therefore, it requires approximately [tex](1000/3)\pi g[/tex] Joules of work to pump all the water out of the tank.

Learn more about work:

https://brainly.com/question/28356414

#SPJ11

which of the following factors change when a sound gets louder? which change when a pitch gets higher? a. intensity b. speed of the sound waves c. frequency d. decibel level e. wavelength f. amplitude

Answers

When a sound gets louder, the following factors change:

a. Intensity

d. Decibel level

f. Amplitude

When a pitch gets higher, the following factors change:

c. Frequency

e. Wavelength

Sound is a type of energy that is transmitted through the vibration of the particles in a medium. When sound is produced, it has characteristics such as frequency, intensity, and amplitude. Changes in these characteristics can result in a different perception of sound by our ears.

When a sound gets louder, the intensity, decibel level, and amplitude of the sound waves increase. Intensity is the amount of energy per unit area that a sound wave carries while the amplitude is the maximum displacement of particles from their equilibrium position. The decibel level also increases with an increase in sound intensity.

When the pitch of a sound gets higher, the frequency of the sound waves increases. Frequency is the number of complete cycles of a wave that occur per second. The wavelength of the sound waves also decreases with an increase in frequency. The speed of sound waves does not change when the pitch of a sound gets higher.

Learn more about frequency:

https://brainly.com/question/254161

#SPJ11

Define coefficient of cubical expansion of solid and hence write an expression for the variation of its density with temperature.​

Answers

Answer:

The coefficient of cubical expansion of a solid is defined as the increase in volume of a solid per unit volume per degree Celsius rise in temperature. It is denoted by the symbol α.

Mathematically, we can express the coefficient of cubical expansion as:

α = (1/V) x (dV/dT)

where V is the volume of the solid and dV/dT is the rate of change of volume with respect to temperature.

The variation of density with temperature can be expressed using the coefficient of cubical expansion as follows:

ρ = m/V, where ρ is the density of the solid and m is its mass.

Differentiating this expression with respect to temperature, we get:

dρ/dT = (1/V) x (dm/dT) - (m/V^2) x (dV/dT)

Using the relationship between the coefficient of cubical expansion and the rate of change of volume with respect to temperature, we can substitute (dV/dT) = αV into the above expression to obtain:

dρ/dT = (1/V) x (dm/dT) - αρ

This equation shows that the variation of density with temperature is directly proportional to the coefficient of cubical expansion of the solid.

(Please could you kindly mark my answer as brainliest you could also follow me so that you could easily reach out to me for any other questions)

What is the output voltage of a 3.0000 V lithium cell in a digital wristwatch that draws 0.280 mA, if the cell's internal resistance is 2.15?

Answers

The output voltage of a 3.0000 V lithium cell in a digital wristwatch that draws 0.280 mA, with the cell's internal resistance of 2.15 ohms can be calculated using Ohm's Law.

Step 1: Convert the current to Amperes (A)
0.280 mA = 0.000280 A

Step 2: Calculate the voltage drop across the internal resistance
Voltage drop = Current (I) × Resistance (R)
Voltage drop = 0.000280 A × 2.15 ohms ≈ 0.000602 V

Step 3: Calculate the output voltage
Output voltage = Cell voltage - Voltage drop
Output voltage = 3.0000 V - 0.000602 V ≈ 2.9994 V

The output voltage of the lithium cell in the digital wristwatch is approximately 2.9994 V.

To know more about Ohm's Law :

https://brainly.com/question/1247379

#SPJ11

an empty parallel plate capacitor is connected between the terminals of a 6.33-v battery and charges up. the capacitor is then disconnected from the battery, and the spacing between the capacitor plates is doubled. as a result of this change, what is the new voltage between the plates of the capacitor?

Answers

The new voltage between the plates of the capacitor in the terminals of a 6.33-V battery is 6.33-V.


The voltage between the plates of the capacitor will remain the same after the spacing between the plates is doubled. This is because the voltage of a capacitor is determined solely by the amount of charge stored in the capacitor. Increasing the spacing between the plates does not change the charge stored on the capacitor, so the voltage between the plates stays the same.

In this case, the new voltage between the plates of the capacitor would remain at 6.33-V.

Learn more about voltage at https://brainly.com/question/24858512

#SPJ11

Given that the population standard deviation is 6.8, what sample size is required to be 90%
confident that the estimated mean has an error less than 0.02?

Answers

The sample size required to be 90% confident that the estimated mean has an error less than 0.02 is 5534.

The formula used to calculate the required sample size is given by:

n = ((zα/2 × σ) / E)²

where:

n = sample size

zα/2 = z-value for the level of confidence (α/2

)σ = population standard deviation

E = maximum error

Population standard deviation, σ = 6.8

Maximum error, E = 0.02

Confidence level, α = 0.9

Therefore, α/2 = 0.45 (since the confidence interval is symmetric)

The z-value for 0.45 level of confidence is 1.645.

Thus:

n = ((1.645 × 6.8) / 0.02)²

n = (11.066 / 0.02)²

n = 5533.0256

Rounding up, the required sample size is n = 5534.

You can learn more about  standard deviation at

https://brainly.com/question/475676

#SPJ11

Which considerations are used to calculate a windchill factor? Select two options.wind speedair pressurewind directionair temperatureatmospheric heating

Answers

Wind speed and Air temperature considerations are used to calculate a windchill factor. Option a and option b are correct.

The considerations used to calculate a windchill factor are,

Wind speed: The faster the wind blows, the faster the body loses heat, and therefore, the colder the air feels.

Air temperature: The lower the air temperature, the colder the air feels, and the greater the effect of the wind on the body.

Therefore, the windchill factor takes into account the air temperature and wind speed to calculate how cold the air feels on exposed skin. Other factors such as humidity and sun angle can also affect the windchill factor. However, air pressure, wind direction, and atmospheric heating are not directly used in the calculation of the windchill factor. Hence, option a and b are correct.

To know more about windchill factor, here

brainly.com/question/12781329

#SPJ4

4. how many kwh of energy could be generated by a coal burning power plant that burned 250 tons of coal and was 40% efficient?

Answers

A coal-burning power station that burned 250 tonnes of coal and also was 40% efficient could produce 7.3E5 kWh of energy. 0.89 kWh/pound for coal. 0.14 kWh/cubic foot for natural gas.

How is one kWh produced?

A power over 1 kW in use for 1 hour is equal to 1 kWh, as are powers of 05 kW used for two h, 2 kW used for 05 hours, etc. 1 k W h is equal to 1 kilowatt multiplied by 1 hour, 1000 watts, 3600 seconds, or 3,600,000 watt-seconds, or joules.

1 kilogramme of coal equals how many kWh?

The calorific value for hard coal, which varies depending on the type, is somewhere between 29.3 MJ/kg (fuel coal) and 33.5 MJ/kg. One kilogramme of coal is equal to 7,000 kilocalories (7,000 kwh 29.3 MJ 8.141 kWh) (anthracite).

To know more about natural gas visit:

https://brainly.com/question/230927

#SPJ1

The coal-burning power plant could generate 667 kWh of energy.

What is Energy?

Energy is the ability to do work, and it comes in many different forms. It can be in the form of mechanical energy, thermal energy, electrical energy, electromagnetic radiation, or nuclear energy, among others. Energy can be converted from one form to another, but it cannot be created or destroyed, only transferred or transformed.

To calculate the energy generated by the coal-burning power plant, we need to use the following formula:

Energy Generated = Efficiency x Energy Content x Amount of Coal Burned

Efficiency is given as 40%, which can be converted to a decimal by dividing by 100:

Efficiency = 40% = 0.40

The energy content of coal varies depending on the type of coal, but a reasonable estimate is around 24 megajoules per kilogram (MJ/kg). To convert this to kilowatt-hours (kWh), we need to divide by 3.6 million (the number of joules in a kWh):

Energy Content = 24 MJ/kg / 3.6 million = 0.00667 kWh/kg

The amount of coal burned is given as 250 tons, which can be converted to kilograms by multiplying by 1000:

Amount of Coal Burned = 250 tons x 1000 kg/ton = 250,000 kg

Now we can substitute these values into the formula:

Energy Generated = 0.40 x 0.00667 kWh/kg x 250,000 kg

Energy Generated = 667 kWh

Learn more about Energy from the given link

https://brainly.com/question/13881533

#SPJ1

Other Questions
Solve for x. Type your answer as a number 65 POINTS, NEED HELP ASAP!!! Match these items. Match the items in the left column to the items in the right column.Left column: 1.CH3OH 2. CH 3COOH 3.CH 2CH 2 4. CH 2O 5.H 3CNH 2 6.C 3H 8 Right column: 1. Amine 2.alcohol3.aldehyde4. acid5. alkane 6.alkene What did gandhi do before becoming a leader for indian independence a stockroom worker pushes a box with mass 11.6 kg on a horizontal surface with a constant speed of 3.00 m/s . the coefficient of kinetic friction between the box and the surface is 0.22.if the force calculated in the previous part is removed, how far does the box slide before coming to rest? you and a friend frequently play a trombone duet in a jazz band. during such performances it is critical that the two instruments be perfectly tuned. since you take better care of your trombone, you decide to use your instrument as the standard. when you produce a tone that is known to be 350 hz and your friend attempts to play the same note, you hear 3 beats every 3.00 seconds. your ear is good enough to detect that your trombone is at a higher frequency. determine the frequency of your friend's trombone. (enter your answer to at least 1 decimal place. Directions: Select the correct text in the passage.In the passage, the characters arrive at Skeleton Island. Which sentence from the passage best shows how the new setting changes thecharacters?from Treasure Island.by Robert Louis StevensonPLEASE HURRYY What did the international tribunal think of hermann goering Identify the slope and y-intercept of the following equation:y = 4x + 1 a blow to the head may cause a person with dissociative amnesia to recall their repressed memories true or false 9. The Star Point Ranger Station and the Twin Pines Ranger Station are 30 miles apart along a straight, mountain road. Each station gets word of a cabin fire in a remote area known as Ben's Hideout. A straight path from Star Point to the fire makes an angle of 34 with the road, while a straight path from Twin Pines makes an angle of 14 with the road. Find the distance, d, of the fire from the road. 34 Star Point Ben's Hideout D d 30 mi 14 Twin Pines 10. In problem 9 we had two expressions that were both equal to d. Use both of your expressions and the value you found for d in problem 7 to check your answers. Explain why they were not exactly equal. Does it matter if this application were real life? Why or why not? What role does alleles play in evolution? what is the smallest value of v sufficient to cause the pendulum (with embedded mass m ) to swing clear over the top of its arc? mike has a mastercard with an annual fee of $25, an 18% interest rate, and a $1,000 credit limit. he always pays the total outstanding balance monthly. his most recent monthly statement lists the previous month's payment, new charges in the current month totaling $1,500, and a $30 fee. the fee is most likely the result of: A chemist wants to prepare a stock solution of H2SO4 so that samples of 20.00mL will produce a solution with a concentration of 0.50 M when added to100.0 mL of water.a. What should the molarity of the stock solution be?b. If the chemist wants to prepare 5.00 L of the stock solution from concentratedH2SO4 , which is 18.0 M, what volume of concentrated acid should beused? How are history, homeplace, and shapeshifting reflected in the four waves of Filipino immigration and Yellow Rose? A chemical manufacturer is setting up capacity in Europe and North America for the next three years. Annual demand in each market is 2 million kilograms (kg) and is likely to stay at that level. The two choices under consideration are building 4 million units of capacity in North America or building 2 million units of capacity in each of the two loca-tions. Building two plants will incur an additional one-time cost of $2 million. The variable cost of production in North America (for either a large or a small plant) is currently $10/kg, whereas the cost in Europe is 9 euro/kg. The cur-rent exchange rate is 1 euro for U.S. $1.33. Over each of the next three years, the dollar is expected to strengthen by 10 percent, with a probability of 0.5, or weaken by 5 per-cent, with a probability of 0.5. Assume a discount factor of 10 percent. What should the chemical manufacturer do? At what initial cost differential from building the two plants will the chemical manufacturer be indifferent between the two options? 18. (5) two conducting plates have charge /- 0.0000470 mc and each has area 0.138 m2. what is the strength of the electric field between the plates? m = milli b. Use ratio language to write two different sentences that compare the amountof ribbon and the number of bouquets. a) He rarely call me,.......? (Add tag question)