why is it less likely that water is contaminating the product (based on what you did and the appearance of the product that you submit)

Because of the addition of one electron, the effective nuclear charge falls and repulsion rises, causing electrons to be further apart and therefore increasing atomic size. We also know that anion has a bigger size than the parent atom, therefore Br- will have the highest atomic size.

The radius of the bromide ion Br- is greater.

Anions are more massive than their parent atoms. The anion's extra electron increases electron-electron repulsion. Since electrons spread out further in space, an anion has a wider radius than its parent atom.

Bromine belongs to the halogen group, which also contains fluorine, chlorine, iodine, and astatine.

learn more about bromide

https://brainly.com/question/29228517

#SPJ1

Answer:

C

Explanation: Your welcome

The pH of a solution is 3.94 (option 2).

The pH of a solution that is 0.410 m in HOCI and 0.050 m in NaOCI can be determined by the following steps. The equation for the ionization of HOCI is given as follows:

HOCI + H2O ↔ H3O+ + OCI-The acid dissociation constant, Ka for the above equation is 1.2 × 10-8. We assume that the reaction is at equilibrium.

The equilibrium expression for the given equation is given below:Ka = [H3O+][OCI-]/ [HOCI]Initially, the concentration of HOCI and NaOCI is the same. Therefore, [HOCI] = 0.410 M and [OCI-] = 0.050 M.

The HClO is the acid and the ClO is the base. HClO is converted into ClO-.Consequently, the initial [H3O+] = 0 and the initial [ClO-] = 0. The equilibrium concentration of [H3O+] will be equal to [ClO-].

Let x be the change in concentration for H3O+ and OCI-. Therefore, we can write the expression for equilibrium concentrations as follows: [HOCI] = 0.410 - x [OCI-] = 0.050 - x [H3O+] = x [ClO-] = x

The equilibrium expression can be written as follows:Ka = [x][x]/ [0.410 - x] [0.050 - x]Ka = x²/ [0.410 - x] [0.050 - x]We can simplify the above equation by ignoring the x terms as it is less than 5% of the initial concentration.

Therefore, x = [H3O+] = [ClO-] = 1.95 × 10-3Thus, the pH of the solution can be determined as follows:pH = -log[H3O+]pH = -log[1.95 × 10-3]pH = 2.71Thus, the correct option is 2. 3.94.

to know more about solution refer here:

https://brainly.com/question/30665317#

#SPJ11

The process in which an atom of uranium-235 splits into smaller nuclei and produces a great amount of energy when bombarded with neutrons is called nuclear fission.

What is nuclear fission?

Nuclear fission is a process in which a large nucleus is split into smaller nuclei by bombarding it with slow neutrons.

The slow-moving neutrons have a greater likelihood of being absorbed by the nucleus and initiating the fission process. In nuclear fission, an enormous amount of energy is released.

The splitting of uranium-235 (U-235) produces a lot of energy, and the reaction is used in nuclear power plants to generate electricity.

The process of nuclear fission occurs when a neutron is fired at the nucleus of a heavy atom, such as uranium-235.

The resulting nucleus is very unstable and breaks into two smaller nuclei, releasing a large amount of energy in the process. This energy is used to generate electricity in a nuclear power plant.

To know more about uranium-235, refer here:

https://brainly.com/question/9099776#

#SPJ4

The spectator ions in  [tex]Na^{+}[/tex] + [tex]OH^{-}[/tex] + [tex]H^{+}[/tex] + [tex]Cl^{-}[/tex]  → [tex]H_{2} O[/tex] +  [tex]Na^{+}[/tex] +  [tex]Cl^{-}[/tex] is sodium ions and chloride ions.

The spectator ion are defined as the ions which do not participate in chemical reactions and present the same on both sides of the reactions. If we write a net chemical reaction the spectator ions are cancelled from both sides of the equation.

          [tex]Na^{+}[/tex] + [tex]OH^{-}[/tex] + [tex]H^{+}[/tex] + [tex]Cl^{-}[/tex]  → [tex]H_{2} O[/tex] +  [tex]Na^{+}[/tex] +  [tex]Cl^{-}[/tex]

If we compare the chemical solutions before and after the reaction, sodium and chloride ions are present in both solutions but they do not undergo any chemical change at all. These ions present in the solution are called spectator ions since they don't participate in the chemical reaction at all.

To learn more about spectator ion

https://brainly.com/question/16033391

#SPJ4

The correct question is,

What are the spectator ions in

 [tex]Na^{+}[/tex] + [tex]OH^{-}[/tex] + [tex]H^{+}[/tex] + [tex]Cl^{-}[/tex]  → [tex]H_{2} O[/tex] +  [tex]Na^{+}[/tex] +  [tex]Cl^{-}[/tex] ?

Number of moles of H+ ions = 2 x 0.048 moles = 0.096 moles. Therefore, 16 ml of 3.0 M sulfuric acid solution contains 0.096 moles of H+ ions.

Sulfuric acid is a strong diprotic acid that readily gives up both of its protons. Assuming it completely dissociates. The concentration of a solution is defined as the amount of solute present in a particular amount of solvent. Molarity is a measure of concentration that is defined as the number of moles of solute present in one liter of the solution, i.e. mol/L.So, the given sulfuric acid solution has a concentration of 3.0 M.

It means that in every liter of the solution, there are 3.0 moles of sulfuric acid. To find out how many moles of H+ ions are present in 16 ml of 3.0 M sulfuric acid solution, we can follow these steps: 1. Convert the volume of the solution from milliliters to liters.1 ml = 1/1000 L16 ml = 16/1000 L = 0.016 L2. Calculate the number of moles of sulfuric acid present in 16 ml of 3.0 M sulfuric acid solution.

Number of moles = Molarity x Volume in liters Number of moles of H2SO4 = 3.0 M x 0.016 L = 0.048 moles3. Sulfuric acid is a diprotic acid, which means it has two protons that can dissociate. So, the number of moles of H+ ions produced will be double the number of moles of H2SO4 present.

Know more about Sulfuric acid here:

https://brainly.com/question/30039513

#SPJ11

It is a nucleophilic reducing agent that works best on polar multiple bonds such as C=O. Aldehydes can be converted to primary alcohols, ketones to secondary alcohols, carboxylic acids and esters to primary alcohols, amides and nitriles to amines using the LiAlH₄ reagent.

Any of a class of organic compounds characterized by one or more hydroxyl (OH) groups attached to an alkyl group's carbon atom (hydrocarbon chain). Alcohols are organic derivatives of water in which one of the hydrogen atoms has been replaced by an alkyl group, which is typically represented by the letter R in organic structures.

Ketones are a type of chemical produced by your liver when it breaks down fats. When you fast, exercise for long periods of time, or don't eat as many carbohydrates, your body uses ketones for energy. Low levels of ketones in the blood are not necessarily harmful.

to know more about alcohols , visit ;

brainly.com/question/10688734

#SPJ1

To plot a theoretical distillation curve please follow the steps while we continue our discussion. Since their boiling point difference is higher it is easier to separate Cyclohexane and toluene by distillation than 1-propanol and 2-propanol.

Plot a theoretical distillation curve of temperature (y-axis) vs. volume in ml (x-axis) for a 15 ml mixture containing 60% 1-propanol and 40% 2-propanol, follow these steps:

1. Determine the boiling points of 1-propanol and 2-propanol. 1-propanol has a boiling point of 97°C, while 2-propanol has a boiling point of 82°C.

2. Calculate the volumes of each compound in the mixture. 60% of 15 ml is 9 ml (1-propanol) and 40% of 15 ml is 6 ml (2-propanol).

3. Plot the boiling points of each compound on the y-axis, and their respective volumes on the x-axis.

4. Draw a curve connecting the two points to represent the theoretical distillation curve.

To determine if 1-propanol and 2-propanol are easier to separate by distillation than cyclohexane and toluene, compare the boiling point differences between the compounds. The boiling point difference between 1-propanol and 2-propanol is 15°C (97°C - 82°C). The boiling point difference between cyclohexane and toluene is 34°C (110°C - 76°C).

Since the boiling point difference between cyclohexane and toluene is greater than that of 1-propanol and 2-propanol, it can be concluded that cyclohexane and toluene are easier to separate by distillation than 1-propanol and 2-propanol.

To know more Distillation:

https://brainly.com/question/24178852

#SPJ11

For a case with 200% theoretical air, 33.3 kmol of air would be required per kmol of fuel. It is given that the stoichiometric combustion of ethane isC2H6 + 3.5(O2 + 3.76N2) → 2CO2 + 3H2O + 13.16N2As per the equation, it takes 3.5 kmol of (O2 + 3.76N2) to burn 1 kmol of ethane, and for 200% theoretical air, 7 kmol of (O2 + 3.76N2) would be used. Hence, option (d) is correct.

Therefore, 2 kmol of ethane would require 7 kmol of (O2 + 3.76N2). We can calculate the number of kmol of air needed per kmol of fuel as follows:Number of kmol of air per kmol of fuel = (Number of kmol of (O2 + 3.76N2) per kmol

of fuel) / 0.21Number of kmol of air per kmol of fuel = (7/2) / 0.21Number of kmol of air per kmol of fuel = 16.67 / 0.21 = 79.29 ≈ 33.3 kmol of airHence, option (d) is correct.

For more similar questions on topic stoichiometric combustion

brainly.com/question/14077954

#SPJ11

The compound(s) that can be used at high concentrations to dampen out electrostatic interactions among amino acid residues are usually small neutral molecules such as glycerol, acetic acid, and ethylene glycol.

Electrostatic interactions between amino acid residues are often stabilized by hydrogen bonds and other covalent interactions. These interactions are sensitive to the surrounding environment and can be disrupted or dampened when exposed to compounds at high concentrations. Small neutral molecules, such as glycerol, acetic acid, and ethylene glycol, can effectively dampen out electrostatic interactions between amino acid residues, allowing them to retain their native conformation.

To know more about electrostatic interactions click on below link :

https://brainly.com/question/29158172#

#SPJ11

The concentration of [F-] in the buffer solution is 1.42 M. It is important to note that the pH scale is logarithmic, so a change of one pH unit represents a tenfold change in the concentration of H+ ions.

What is pH?

The pH scale ranges from 0 to 14, with 0 being the most acidic, 14 being the most basic, and 7 being neutral. A solution with a pH of 7 has an equal concentration of H+ and OH- ions, while a solution with a pH less than 7 has a higher concentration of H+ ions, making it acidic, and a solution with a pH greater than 7 has a lower concentration of H+ ions, making it basic.

To calculate the concentration of [F-] in a buffer solution, we can use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

where pH is the pH of the buffer solution, pKa is the dissociation constant of the weak acid, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the weak acid.

In this case, the weak acid is HF, and its conjugate base is F-. The pKa of HF is 3.20, and the pH of the buffer solution is 3.05. Therefore:

3.05 = 3.20 + log([F-]/[HF])

Simplifying:

log([F-]/[HF]) = -0.15

Taking the antilog of both sides:

[F-]/[HF] = 10^(-0.15)

[F-]/[HF] = 0.71

Now we know the ratio of [F-]/[HF] in the buffer solution. We also know the concentration of HF, which is 2.00 M. Therefore:

[F-] = [HF] x [F-]/[HF]

[F-] = 2.00 M x 0.71

[F-] = 1.42 M

Learn more about pH from given link

https://brainly.com/question/172153

#SPJ1

The molecular formula of the carbohydrate is C12H20O10.

The molecular formula of this carbohydrate can be determined by calculating the molecular mass of the compound.

The molecular mass of the compound is calculated using the following equation: Molecular mass = %C x 12 + %H x 1 + %O x 16.

In this case, we can calculate the molecular mass of the compound to be approximately 180 amu.

Since the molecular mass of the carbohydrate is between 140 and 160 amu, the molecular formula of the compound is C12H20O10.

This molecular formula consists of 12 carbon atoms, 20 hydrogen atoms, and 10 oxygen atoms.

The mass percentages of these elements match the molecular formula of the carbohydrate: 40.0 % carbon, 6.71 % hydrogen, and 53.3 % oxygen.

To conclude, the molecular formula of the carbohydrate is C12H20O10. This is calculated by first determining the molecular mass of the compound, then dividing the mass of each element by the molecular mass of the compound.

The molecular mass of the compound is calculated by multiplying the mass percentage of each element by the molar mass of each element.

In this case, the molecular mass of the compound is between 140 and 160 amu, so the molecular formula of the carbohydrate is C12H20O10.

to know more about carbohydrate  refer here:

https://brainly.com/question/29775112#

#SPJ11

The increased electron density around a carbon affects the chemical shift of attached hydrogen by causing it to experience an upfield shift or a lower chemical shift value.

This occurs because the increased electron density surrounding the carbon atom shields the attached hydrogen nucleus from the applied magnetic field, resulting in a decreased resonance frequency and a smaller chemical shift value.

When there is increased electron density around a carbon atom, the electrons act as a shield for the attached hydrogen nucleus. The shielding effect reduces the influence of the external magnetic field on the hydrogen nucleus. As a result, the resonance frequency of the hydrogen nucleus decreases.

This decrease in resonance frequency corresponds to an upfield shift in the chemical shift value.

Therefore, increased electron density around a carbon atom leads to a lower chemical shift value for an attached hydrogen nucleus.

To learn more about spectroscopy refer: https://brainly.com/question/28543039

#SPJ11

The amount of water remaining after the reaction of a 5.50-g sample of CaO is reacted with 5.31 g of [tex]H_{2}O[/tex] is complete is 3.546 g.

From the case above, we are given the reaction:  

CaO + [tex]H_{2}O[/tex] → [tex]Ca(OH)_{2}[/tex]  

To solve this question, we can use the law of conservation of mass. This states that the total mass before and after a chemical reaction is equal.

The equation is

v = m ÷ M

v(CaO) = m ÷ M

= 5.5 g ÷ 56 g/mol

= 0.098 mol

v([tex]H_{2}O[/tex]) = 5.31 g ÷18 g/mol

= 0.295 mol

According to the equation:

v(CaO) : n([tex]H_{2}O[/tex])) = 1 : 1

CaO reacts completely, (tex]H_{2}O[/tex]) is in excess.

0.098 mol H2O reacts with CaO.

v([tex]H_{2}O[/tex]) = 0.295 - 0.098 = 0.197 mol of water will remain after the reaction is complete.

m([tex]H_{2}O[/tex]) = 0.197mol * 18g/mol = 3.546 g

Thus, the amount of water remaining after the reaction is complete is 3.546 g.

For more information about law of conservation of mass refers to the link: https://brainly.com/question/28711001

#SPJ11

Answer: Yes, the direction of the electron flow is important in the observed behavior.

Electrons are negatively charged particles, so their flow direction can affect their behavior in a variety of ways. Electrons flow from areas of high to low potential energy, which means that they will move from a negatively charged electrode to a positively charged one.

To answer this scientific question, we can also discuss the behavior of electrons in different situations. For example, the flow of electrons is critical to the function of many electrical devices. The flow of electrons in a circuit must be directed in a particular manner to ensure that the device operates correctly.

The direction of electron flow is also important in the behavior of magnetic fields. The motion of electrons in a magnetic field creates a magnetic field around the conductor, which affects the behavior of other materials nearby.

Overall, the direction of electron flow is important in many different areas of science and technology. Understanding the behavior of electrons can help us design better electronic devices, improve our understanding of magnetism and electromagnetism, and advance our knowledge of many other fields.

Learn more about electron flow here:
https://brainly.com/question/17642965#


#SPJ11

(a) We would need 7 pies to serve a slice of pie with each cup of hot chocolate.

(b) There would be 6 slices of pie left over.

From item 6, we know that there are 50 cups of hot chocolate to be served.

Since each pie can be cut into 8 slices, we would need to serve 50/8 = 6.25 pies.

Since we cannot serve a fractional pie, we would need to round up to the next whole number of pies, which is 7.

To find out how many slices of pie would be left over, we need to calculate the total number of slices of pie and subtract the number of slices used to serve the hot chocolate.

Total number of slices of pie = 7 pies x 8 slices per pie = 56 slices

Number of slices used to serve the hot chocolate = 50 slices

Therefore, the number of slices of pie left over would be:

56 slices - 50 slices = 6 slices

Learn more about pieces of pie here: https://brainly.com/question/11694372

#SPJ1

Answer:

The boiling point of water depends on the pressure exerted on its surface. At standard atmospheric pressure, which is about 101.3 kPa, water boils at 100°C (212°F).

However, in this case, the pressure on the surface of water is 30 kPa, which is lower than standard atmospheric pressure. As the pressure decreases, the boiling point of water also decreases.

To determine the boiling point of water at 30 kPa, we can use a steam table or a phase diagram of water. According to a steam table, at 30 kPa, the boiling point of water is approximately 35.3°C (95.5°F).

Therefore, if the pressure on the surface of the water is 30 kPa, the water will boil at approximately 30°C

The total volume you have to dilute the portion of the stock solution is 106.67 mL.

To make a solution of hydrochloric acid (HCl) with a concentration of 6.0 M from 80.0 mL of a 8.0 M stock solution, you would need to dilute the portion of stock solution.

To calculate that volume, you need to use the dilution formula:

C₁V₁ = C₂V₂

where C₁ is the original concentration of the stock solution (8.0 M), V₁ is the volume of stock solution used (80.0 mL), C₂ is the desired concentration of the final solution (6.0 M), and V₂ is the total volume of the final solution.

Thus, when you solve for V₂, you get:

V₂ = C₁V₁ / C₂

V₂ = 8.0 M x 80.0 mL/6.0 M

V₂ = 106.67 mL

Therefore, the total volume of the solution after dilution is 106.67 mL.

Learn more about dilution here: https://brainly.com/question/24881505.

#SPJ11

12.5 mmol/L is the molar concentration of the sample having 0.5 M solution dissolved in water.

To answer this question, we need to calculate the molar concentration of the sample.
First, we need to find the amount of ammonium in the 500 mL of the 0.5 m solution.

We can calculate this by multiplying the molarity by the volume, which gives us 500 mL x 0.5 mol/L = 250 mmol.
Now, to find the molarity of the 20 mL sample, we need to divide the amount of ammonium by the volume of the sample: 250 mmol / 20 mL = 12.5 mmol/L.

Therefore, the molar concentration of the sample is 12.5 mmol/L.

Learn more about molar concentration: https://brainly.com/question/26255204

#SPJ11

Explaination :

Negative ion -

Electrons may be taken out of or added to an atom with far more ease than protons or neutrons. The process of adding or removing electrons from an atom results in the formation of ions. An atom obtains one electron and becomes an anion when the number of electrons in the atom is greater than the number of protons.

A cation is a positively charged ion that resulted from electron loss; these ions have fewer electrons than protons. Atoms do this to increase their energy stability by filling their outer electron shell.

The negatively charged ions that balance the net positive charge from metal ions such as k, na, and ca2 are anions.

The most abundant anion outside the cell is Chloride (Cl-) and it neutralizes sodium ions (Na+) most often.

Chloride (Cl-) is one of the major anions in the extracellular fluid, responsible for maintaining the osmotic balance and electrical neutrality of the extracellular fluid.

Sodium ions (Na+) are one of the most common positively charged metal ions, that are balanced by negatively charged ions like Cl-.

Chloride ions are important in the body for helping maintain the acid-base balance in the body and regulating the pH of the blood.

They are also involved in the production of stomach acid by the parietal cells in the stomach.

To know more about the negative ion https://brainly.com/question/11829359

#SPJ11

The final pressure and temperature are 1.131 atm and (0.9786 mol/ 0.8546 mol).

A chemical equation serves as a metaphor for the transformation of reactants into products. Iron sulfide, for instance, is created when iron (Fe) and sulfur (S) mix (FeS). Fe(s) + S(s) = FeS (s) Iron reacts with sulfur, as indicated by the + sign.

For the complete combustion of butane, the following chemical equation is balanced:

2C4H10 + 13O2 → 8CO2 + 10H2O

mass of butane = (number of moles of butane) x (molar mass of butane)

= (number of moles of oxygen) x (molar mass of oxygen)

= (mass of oxygen) / (molar mass of oxygen) x (molar mass of butane)

The mass of oxygen can be calculated from the ideal gas law:

PV = nRT

n = PV / RT

The amount of moles of oxygen can be determined using this equation with P = 1 atm, V = 5 L, and T = 500 K:

n = (1 atm) x (5 L) / [(0.08206 L atm mol⁻¹ K⁻¹) x (500 K)]

= 0.1222 mol

The mass of butane is:

mass of butane = (0.1222 mol) x (58.12 g/mol)

= 7.11 g

Before the reaction, there were n = 0.1222 mol (butane) + (13/2) x 0.1222 mol moles of gas in the vessel (oxygen)

= 0.8546 mol

The balanced equation:

n = (8/2) x 0.1222 mol (carbon dioxide) + (10/2) x 0.1222 mol (water vapor)

= 0.9786 mol

Solving for P2, we get:

P2 = (n2 / n1) x (T1 / T2) x P1

= (0.9786 mol / 0.8546 mol) x (500 K / T2) x (1 atm)

= 1.131 atm

Solving for T2, we get:

T2 = (n2 / n1) x (P1 / P2) x T1

= (0.9786 mol / 0.8546 mol)

To know more about final pressure visit:-

https://brainly.com/question/30862968

#SPJ1

Question:

A vessel contains a stoichiometric mixture of butane and air. The vessel is at a temperature of 500 K, a pressure of 1 atm, and has a volume of 5 L. If the reaction goes to completion, what volume of gas will be present in the vessel after the reaction and what will be the final pressure and temperature? Assume ideal gas behavior and that the reaction occurs with complete combustion.

The given statement that "the color of a basic dye is in the positive ion, and the color of an acidic dye is in the negative ion" is: true.

Basic Dye: It is a type of dye that is cationic in nature. It contains the positive ion, which is responsible for the color. It works best for staining acidic components in the sample.

As it contains a positive ion, it attracts the negatively charged components of the cell walls of bacteria or the tissues of the organism. This makes it easier to visualize the structures of the organism under the microscope.

Acidic Dye: Acidic Dye is anionic in nature, meaning that it contains a negative ion that is responsible for color. It works best for staining basic components in the sample.

As it contains a negative ion, it repels the negatively charged components of the cell walls of bacteria or the tissues of the organism. This makes it easier to visualize the structures of the organism under the microscope.

Therefore, it can be concluded that the given statement is true.

To know more about Acidic Dye refer here:

https://brainly.com/question/30902645#

#SPJ11

Answer: In summary, a primary amine should show between one and three signals in the IR spectrum between 3350 cm-1 and 3500 cm-1.

The exact number of signals depends on the structure and chemical environment of the molecule.

The infrared (IR) spectrum of a primary amine should show signals between 3350 cm-1 and 3500 cm-1, with the exact number depending on the structure and chemical environment of the molecule. Generally, primary amines should exhibit signals at 3300 cm-1, 3350 cm-1, 3420 cm-1 and 3500 cm-1. These signals correspond to the stretching vibrations of the N-H bond, C-N bond, C-H bond and the N-H out of plane bend, respectively.

To determine the number of signals expected between 3350 cm-1 and 3500 cm-1, one needs to consider the structure and environment of the molecule in question. In an unmodified primary amine, a total of two signals should be seen, namely the C-H bond at 3350 cm-1 and the N-H out of plane bend at 3500 cm-1.

However, if the primary amine has a ring structure or is part of a larger, more complex molecule, additional signals may appear, including the C-N bond at 3420 cm-1.

In summary, a primary amine should show between one and three signals in the IR spectrum between 3350 cm-1 and 3500 cm-1. The exact number of signals depends on the structure and chemical environment of the molecule.

Learn more about signals on spectrums here:

https://brainly.com/question/30509950#


#SPJ11

The correct answer is: the movement of a large number of potassium ions out of the cell causes the repolarization phase of the action potential. (It was not listed among the options)

During the depolarization phase, sodium ions move into the cell, causing the membrane potential to become more positive. During the repolarization phase, potassium ions move out of the cell, causing the membrane potential to become more negative again.

This movement of potassium ions out of the cell is what restores the resting membrane potential and prepares the cell for the next action potential.

Learn more about action potential:https://brainly.com/question/30634467

#SPJ1

The equation for the production of sulfur trioxide gas from sulfur dioxide (57.50 g) and oxygen (20.0 L) using the ideal gas law indicates;

The volume of sulfur trioxide that will be formed at STP is 20.1 L

The volume of sulfur trioxide formed at 15.0°C and 98920 Pa is 21.7 L

The ideal gas law is an equation of state that describes an ideal gas behavior. It relates the pressure (P), volume (V), and temperature (T) of a gas to the number of moles (n) of the gas and the universal gas constant. The equation is written as P·V = n·R·T

The balanced chemical equation for the reaction is: 2SO₂ (g) + O₂ (g) --> 2SO₃ (g)

First, we need to convert the given amounts of reactants to moles. We can do this by using the molar mass of SO₂ (64.07 g/mol) and the ideal gas law for O₂ (P·V = n·R·T). At STP (Standard Temperature and Pressure), the temperature is 0°C (273.15 K) and the pressure is 1 atm (101325 Pa). The gas constant R is 8.314 J/Kmol.

The number of moles of SO₂ is: 57.50 g/(64.07 g/mol) = 0.897 moles

The number of moles of O₂ is; (101325 Pa)·(20.0 L)/(8.314 J/K.mol)·(273.15 K) = 0.892 moles

Since the ratio of SO₂ to O₂ in the balanced equation is 2:1, SO₂ is the limiting reactant and will determine the amount of product formed.

The number of moles of SO₃ produced is; (0.897 mol SO₂)·(2 mol SO₃/2 mol SO₂) = 0.897 mol (Which is based on the number of moles of SO₂ in the reactant side of the equation)

To find the volume of SO₃ at 15°C and 98920 Pa, we can use the ideal gas law again; P·V = n·R·T

Therefore, the volume of sulfur trioxide formed at STP is 20.1 L and at 15°C and 98920 Pa is 21.7 L

Learn more on the ideal gas law here: https://brainly.com/question/29588640

#SPJ1

The total pressure in a 2 L flask that contains 5.33 g of Ne and 13.40 g of Ar at 38°C is 5.20 atm.


To calculate the total pressure, you must use the ideal gas law equation: PV = nRT, where P is pressure, V is volume, n is the amount of gas (in moles), R is the gas constant, and T is temperature in Kelvin.

You must first convert the temperature from Celsius to Kelvin (38°C = 311.15 K). Next, you must convert the mass of each gas into moles (5.33 g Ne = 0.01502 mol, 13.40 g Ar = 0.2225 mol).

Finally, you can calculate the total pressure (P = (0.01502 mol Ne + 0.2225 mol Ar) * 0.08206 L atm K⁻¹ mol⁻¹ * 311.15 K/ (2 L) = 5.20 atm).

To know more about ideal gas law click on below link:

https://brainly.com/question/28257995#

#SPJ11

Answer: The equation that summarizes the reaction being measured in the experiment examining catalase activity is  2H2O2 → 2H2O + O2.

What is Catalase?

Catalase is a type of enzyme that aids in the decomposition of hydrogen peroxide into water and oxygen. It is present in most living organisms exposed to oxygen, including plants and animals such as humans. Catalase is one of the body's most active enzymes.

Catalase is responsible for breaking down hydrogen peroxide, a toxic byproduct of cell metabolism, into harmless water and oxygen. Catalase has one of the highest turnover rates of any known enzyme, meaning that it can process millions of molecules of hydrogen peroxide per second.

The reaction being measured in the experiment examining catalase activity is the breakdown of hydrogen peroxide into water and oxygen by the enzyme catalase. The equation for this reaction is: 2H2O2 → 2H2O + O2

The reaction is a decomposition reaction, in which hydrogen peroxide breaks down into water and oxygen. The oxygen is released as a gas, which can be measured to determine the rate of the reaction. The experiment examining catalase activity is often used to study enzyme kinetics, which is the study of the rate and mechanism of enzyme-catalyzed reactions.



Learn more about catalase here:

https://brainly.com/question/12905174#



#SPJ11

The three-step synthesis of the product from 1-methylcyclohexene is as follows: converted into 1-bromo-1-methylcyclohexane with HBr, use NaNH2 (sodium amide) with the product obtained from step 1 and treat the obtained intermediate from step 2 with D2O (heavy water)

It will convert the lithium (Li) atom on the cyclohexyl ring's tertiary carbon atom to a deuterium (D) atom. Here's the answer to the question: Select reagent 1: Hydrobromic acid (HBr)Select reagent 2: Sodium amide (NaNH2)Select reagent 3: Heavy water (D2O). To synthesize the desired product from 1-methylcyclohexene, follow these three steps with the corresponding reagents:

1. Reagent 1: Osmium tetroxide (OsO4)
2. Reagent 2: Sodium periodate (NaIO4)
3. Reagent 3: Sodium borohydride (NaBH4)


Add osmium tetroxide (OsO4) to the 1-methylcyclohexene. This will form a diol via dihydroxylation of the double bond. Add sodium periodate (NaIO4) to the resulting diol. This will cleave the diol into two aldehyde groups through oxidative cleavage. Add sodium borohydride (NaBH4) to the aldehydes formed in step 2. This will reduce the aldehyde groups to the corresponding alcohol groups, resulting in the desired product.

To know more about 1-methylcyclohexene, refer here:

https://brainly.com/question/25587674#

#SPJ11

Student question: You have a 100 mL solution of 0.02 M sodium carbonate (Na2 CO3 ). You are given the following information:

Your answer: To work with this 0.02 M sodium carbonate (Na2CO3) solution, you can follow these steps:

Step 1: Calculate the moles of Na2CO3 in the solution.
To do this, use the formula:

Moles = Molarity × Volume (in L)
Moles = 0.02 M × 0.100 L (since 100 mL = 0.100 L)
Moles = 0.002 mol Na2CO3

Step 2: Utilize the information given in the problem.
As you haven't provided any additional information, you can now use the 0.002 moles of Na2CO3 in the 100 mL solution for your further calculations or reactions, depending on the context of your problem.

molecules

B.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~`