Why does salt as a solid compound not exist in the ocean?

AlthoughNa⁺ and Fe²⁺   are typically weaker oxidising agents than Au³⁺ , this may not always be the case in every process.

An oxidizing agent is a species that causes oxidation by accepting electrons or donating oxygen, and therefore it is characterized by having a high oxidation state. In general, the ability to act as an oxidizing agent increases as the oxidation state of the species increases. Based on this, we can arrange the given species in order from best to poorest oxidizing agent as follows:

Au³⁺ > Fe²⁺ > Na⁺

Among these species, Au³⁺ has the highest oxidation state and therefore the strongest ability to act as an oxidizing agent. Fe²⁺ has a lower oxidation state than Au³⁺, but it is still capable of acting as an oxidizing agent in certain reactions. Na⁺ has the lowest oxidation state of the three and is therefore the poorest oxidizing agent among them.

It's important to note that the ability to act as an oxidizing agent also depends on other factors, such as the nature of the other reactants involved and the reaction conditions.

Therefore, while Au³⁺ is generally a stronger oxidizing agent than Fe²⁺ and Na⁺, this may not always be the case in every reaction.

To learn more about oxidizing agent  refer to:

brainly.com/question/10547418

#SPJ4

Answer:

Explanation: Hello Sonic, the explanation and answer to your question is that When vinegar (acetic acid) is mixed with dolomite (a mineral composed of calcium magnesium carbonate), a chemical reaction occurs. The acetic acid reacts with the calcium and magnesium ions in the dolomite, causing them to dissolve into the vinegar solution. This results in the formation of calcium acetate and magnesium acetate, which are soluble in water. The chemical equation for this reaction is: CaMg(CO3)2 + 2CH3COOH → Ca(CH3COO)2 + Mg(CH3COO)2 + H2O + CO2 In this equation, CaMg(CO3)2 represents dolomite, CH3COOH represents acetic acid, Ca(CH3COO)2 represents calcium acetate, Mg(CH3COO)2 represents magnesium acetate, H2O represents water, and CO2 represents carbon dioxide gas. The reaction also produces bubbles of carbon dioxide gas, which can be seen as the mixture fizzes and bubbles. Overall, the reaction between vinegar and dolomite is an example of an acid-base reaction, where the acetic acid acts as the acid and the dolomite acts as the base. This reaction can be used to dissolve dolomite rocks or to create calcium and magnesium acetate solutions for various applications. Hope this helps :)

The presence of waters of hydration can affect the enthalpy of a substance when it is dissolved. Hydration occurs when a substance is surrounded by or interacts with water molecules.

When a substance is dissolved, the attraction between the solute molecules and the water molecules can cause an increase in the enthalpy of the reaction. This is because more energy is needed to separate the molecules and allow them to interact with the solvent. When hydrated, how does water affect the enthalpy for dissolving?The addition of waters of hydration increases the enthalpy of dissolving.The enthalpy change of dissolving a compound refers to the heat energy absorbed or released when the compound dissolves in water

. Hydration water is present in most solids. This water exists as coordinated water molecules that are bound to the ions present in the solid. As a result, when a compound dissolves in water, hydration water is also present. As a result, when a substance dissolves in water, it consumes energy to break the water's hydrogen bonds and dissolve the compound's particles. The enthalpy change of dissolving a compound is affected by the number of water molecules consumed in the hydration process. The enthalpy of dissolving a compound rises as the number of hydration water molecules increases.

Hence, when water is used to hydrate a substance, it raises the enthalpy of dissolution.The enthalpy of hydration is the energy required to hydrate a mole of ions. The hydration energy is released when the ions and water molecules interact, and the hydration shells form around the ions. The enthalpy change of dissolving a compound, like the enthalpy of hydration, is influenced by the hydration process. The enthalpy of hydration, on the other hand, is negative because it is a release of energy. The hydration energy offsets some of the energy needed to dissolve the compound's particles, resulting in a lower enthalpy of dissolving.

For more such questions on enthalpy

https://brainly.com/question/9813275

#SPJ11

If the combustion reaction is reversible, the likely magnitude of the equilibrium constant, Kc would depend on the stoichiometric coefficients of the reactants and products involved in the reversible reaction, as well as the temperature and pressure conditions of the reaction.

If a combustion reaction was a reversible reaction, the likely magnitude of the equilibrium constant, Kc would be determined by the equation below:

Kc = [C]^c [D]^d / [A]^a [B]^b

Where A, B, C, and D are the reactants and products of the reversible reaction, and a, b, c, and d are their corresponding stoichiometric coefficients. Since hydrogen is used as a rocket fuel because it is very light and reacts explosively and completely with oxygen, its combustion reaction with oxygen is an exothermic reaction, and the combustion of hydrogen and oxygen is not a reversible reaction. It can be represented by the following equation:

2H2 + O2 → 2H2O

However, if the combustion reaction is reversible, the likely magnitude of the equilibrium constant, Kc would depend on the stoichiometric coefficients of the reactants and products involved in the reversible reaction, as well as the temperature and pressure conditions of the reaction.

Know more about equilibrium constant

https://brainly.com/question/3159758

#SPJ11

The formal charges ought to add up to the molecule's overall charge, which for HCNO is zero. The genuine electronic circulation in HCNO is a cross breed of the two reverberation structures displayed here.

Isocyanic acid, which is a small, unstable molecule made up of hydrogen, carbon, nitrogen, and oxygen atoms, has the chemical formula HCNO. It has the construction HNCO or H-O=C=N, where the nitrogen particle is clung to both the carbon and oxygen iotas through twofold bonds. At room temperature, isocyanic acid is a colorless gas that is very reactive, making it difficult to isolate and study. Numerous organic compounds, including ureas, carbamates, and biurets, are synthesized using this important intermediate. The thermal decomposition of urea also has the potential to produce it.

To know more about Thermal Decomposition, visit:

https://brainly.com/question/14949019

#SPJ1

Explanation:

First, heat it from 55-100 C

11.8 g   ( 100 - 55) C  4.18 J / g C = 2219.6 J   = 2.22 kJ

Your heat of vaporization is in units of moles

   so 11.8 g of H2O =   11.8 gm / 18 gm /mole = .656 moles

Then

.656 moles * 40.6 kJ / mole = 26.6 kJ

Total kJ = 2.22 + 26.6 = 28.8 kJ

Metallic behavior correlates with large atomic size and low ionization energy. This is true. In metallic behavior, a metal atom tends to lose electrons easily and form positive ions. When these atoms are packed together in a solid metal, they form a lattice that consists of positively charged ions and free electrons, which are free to move throughout the lattice.

When atoms have low ionization energies, it is easier for them to lose electrons and become positive ions. So, large atomic size and low ionization energy can lead to metallic behavior. A larger atomic size means that there is more distance between the nucleus and the outermost electrons. This means that the valence electrons are not as strongly attracted to the nucleus, and it is easier for them to be removed. Low ionization energy means that the energy required to remove an electron from an atom is low. So, when an atom with low ionization energy is in contact with another atom, it tends to lose electrons easily and become a positive ion. This positive ion then attracts the electrons from the other atom, forming a metallic bond. Thus, metallic behavior correlates with large atomic size and low ionization energy. This is because these properties make it easier for metal atoms to lose electrons and become positive ions, leading to metallic bonding.

for more such questions on  ionization.

https://brainly.com/question/29441502

#SPJ11

Answer:(part a) Lithium and Chlorine, (part c) Potassium and Oxygen are likely to form an ionic compound.

Explanation:

brainliest please

Lignin decomposition played a crucial role in the rise and fall of oxygen levels during the Carboniferous period.

During the Carboniferous period, forests covered vast areas of the Earth, and the growth of trees and plants led to the accumulation of lignin in soils and sediments. Lignin is a complex organic polymer that is resistant to decomposition, and its buildup in the soil prevented the complete decay of organic matter.

As a result, oxygen was continually produced and released into the atmosphere through photosynthesis, while the carbon that was not decomposed was stored in the form of coal.

However, as the amount of lignin increased over time, the rate of oxygen production eventually reached a plateau, and the oxygen levels in the atmosphere began to decline. As lignin-rich organic matter accumulated in the soil and was buried over time, the oxygen levels continued to fall, and the carbon in the soil was converted into coal through heat and pressure.

Overall, lignin decomposition played a critical role in shaping the atmospheric conditions during the Carboniferous period, and its buildup and eventual burial had a significant impact on the rise and fall of oxygen levels on Earth.

To know more about Lignin decomposition, refer here:

https://brainly.com/question/29177862#

#SPJ11

The two conformations of the same disaccharide shown on the right likely differ in their free energy levels due to the arrangement and interactions of their constituent molecules. The top conformation, with a lower free energy, is likely more stable because of the formation of favorable interactions, such as hydrogen bonding, between the mono saccharide units, and a more optimal orientation of their functional groups.

In addition, the lower free energy conformation could be attributed to a reduced level of steric hindrance, where the spatial arrangement of the atoms in the disaccharide allows for minimal clashes and more efficient packing of the molecule. This can lead to a more stable and energetically favorable structure.

Moreover, the stability of the top conformation may be further enhanced by the presence of intramolecular forces, such as van der Waals interactions and hydrophobic effects. These interactions can significantly contribute to the overall stability of the molecule and subsequently result in a lower free energy state.

In summary, the top conformation of the disaccharide likely has a lower free energy due to a combination of factors, including favorable interactions between the monosaccharide units, optimal orientation of functional groups, reduced steric hindrance, and the presence of intramolecular forces. These factors collectively contribute to a more stable and energetically favorable molecular structure.

for more such question on molecules

https://brainly.com/question/24191825

#SPJ11

The number of moles of MgCO₃ is also 0.200 moles and the mass of magnesium carbonate at the start was 16.86 g.

The balanced chemical equation for the reaction between sulfuric acid (H₂SO₄) and magnesium carbonate (MgCO₃) is:

H₂SO₄ + MgCO₃ → MgSO₄ + CO₂ + H₂O

From the balanced equation, we can see that one mole of sulfuric acid reacts with one mole of magnesium carbonate to produce one mole of magnesium sulfate, one mole of carbon dioxide, and one mole of water.

The moles of magnesium carbonate at the start can be calculated from the number of moles of sulfuric acid that reacted with it, using the mole ratio from the balanced equation:

1 mole of MgCO₃ will reacts with 1 mole of H₂SO₄

Therefore, the number of moles of MgCO₃ is also 0.200 moles.

The mass of magnesium carbonate at the start can be calculated using its molar mass and the number of moles:

molar mass of MgCO₃ = 24.31 g/mol (for Mg) + 12.01 g/mol (for C) + 3(16.00 g/mol) (for 3 O) = 84.31 g/mol

mass of MgCO₃ = number of moles × molar mass

mass of MgCO₃ = 0.200 moles × 84.31 g/mol

mass of MgCO₃ = 16.86 g

To know more about number of moles here

https://brainly.com/question/14919968

#SPJ4

The compound given is 3-methyl-2-pentenoic acid.

Thermal decarboxylation of 3-methyl-2-pentenoic acid is a reaction in which the carboxylic acid group is removed from the molecule, resulting in the formation of an alkene.

In this reaction, the acid group is first protonated and then the bond between the alpha carbon and the carboxyl oxygen is broken. The major organic product formed on thermal decarboxylation of 3-methyl-2-pentenoic acid is 2-methyl-1-pentene.

The initial step of the reaction involves the protonation of the carboxylic acid group of 3-methyl-2-pentenoic acid by a strong acid, typically sulfuric acid. This protonation activates the carboxyl group and makes it more susceptible to decarboxylation.

The subsequent step involves the breaking of the bond between the alpha carbon and the carboxyl oxygen, resulting in the loss of carbon dioxide and the formation of the alkene. The formed alkene in this reaction is 2-methyl-1-pentene.

Therefore, the major organic product formed on thermal decarboxylation of 3-methyl-2-pentenoic acid is 2-methyl-1-pentene.

Know more about decarboxylation here

https://brainly.com/question/17312252#

#SPJ11

The classification of radicals are :

(CH₃)CHCH₂CH₂ = The Secondary radical

(CH₃)CHCHCH₃ = The Tertiary radical

H₂C = The Primary radical

The radical is the atom or the molecule with the unpaired electron. The unpaired electron will gives the radical the chemical reactivity, as it is the highly reactive because of the unpaired electron.

The Primary free radicals: When the radical is attached to the two H-atoms.

The Secondary free radicals: When the radical is attached to the one H-atoms.

The Tertiary free radicals: When the radical is not attached to the any Hydrogen atoms.

The unpaired electron in the free radical is the highly reactive, the leading to the radical reactions that can be the important in the many chemical processes.

To learn more about radical here

https://brainly.com/question/17192138

#SPJ4

This question is incomplete, the complete question is :

classify the radicals into the appropriate categories. Primary. Secondary. Tertiary. Allylic.

(CH₃)CHCH₂CH₂, (CH₃)CHCHCH₃, H₂C

With a pressure rise to 11.1 atm, the hydrogen gas volume is 2.03 L.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas. The equation for the combined gas law is:

P₁V₁/T₁ = P₂V₂/T₂

Where P₁, V₁, and T₁ are the initial pressure, volume, and temperature, respectively, and P₂, V₂, and T₂ are the final pressure, volume, and temperature, respectively.

We can rearrange this equation to solve for V₂:

V₂ = (P₁V₁T₂)/(P₂T₁)

We are given that the initial volume (V₁) is 4.4 L, the initial pressure (P₁) is 4.9 atm, and the final pressure (P₂) is 11.1 atm. We are asked to find the final volume (V₂) when the pressure is increased to 11.1 atm.

We can assume that the temperature (T₁) is constant, since it is not specified otherwise. Therefore, we can substitute the values into the equation and solve for V₂:

V₂ = (P₁V₁T₂)/(P₂T₁)

V₂ = (4.9 atm)(4.4 L)(273 K)/(11.1 atm)(273 K)

V₂ = 2.03 L

Therefore, the volume of the hydrogen gas is 2.03 L when the pressure is increased to 11.1 atm.

To learn more about volume refer to:

brainly.com/question/14710169

#SPJ4

You can identify the limiting reactant and the surplus reactant in a chemical reaction if you know how many moles are needed for one of the reactants.

To do this, compare the number of moles of the necessary reactant to that of the accessible reactant. The limiting reactant is the one that results in the smallest quantity of product, and the excess reactant is the one that results in the most significant amount of product.

Consider a reaction where 4 moles of the product are produced from 2 moles of reactant A and 3 moles of reactant B. The following calculation can be used to identify the limiting reactant if you have 4 moles of reactant A and 6 molecules of reactant B:

4 moles of reactant A / 2 moles required of reactant A equals 2.

6 moles of reactant B divided by 3 molecules of reactant B needed equals 2.

There is no surplus because both reactants yield the same amount of product, meaning they are both fully utilized. One reactant would be limiting and the other would be in excess of the computations that had yielded a different result.

learn more about limiting reactants here

https://brainly.com/question/14222359

#SPJ1

Answer:

After determining the amount of moles required for one of the reactants, it was shown that ✔ copper was the limiting reactant and ✔ sulfur was the excess reactant.

Explanation:

edge 2023

To calculate Laila's average running speed, the following data should be recorded:

The distance she ran - This can be measured using a GPS device or by using a running track.

The time taken to run that distance - This can be measured using a stopwatch or a timer.

By dividing the distance by the time taken, we can calculate Laila's average running speed.

Average Speed = Distance / Time

For example, if Laila runs a distance of 5 kilometers in 30 minutes, her average running speed would be:

Average Speed = 5 km / (30/60) hr = 10 km/hr

Therefore, to calculate Laila's average running speed, we need to record the distance she ran and the time taken to run that distance.

The compound that will exhibit hydrogen bonding with itself in the liquid state is CH3CH2NH2.

Hydrogen bonding is a special kind of dipole-dipole attraction in which hydrogen is bonded to an element like oxygen, nitrogen, or fluorine. Hydrogen bonding is stronger than Van der Waal's forces but weaker than covalent, ionic or metallic bonds.

An explanation for the given alternatives:

a) CH3OCH3 will not exhibit hydrogen bonding with itself in the liquid state.

b) H2CO will not exhibit hydrogen bonding with itself in the liquid state.

c) CH3COCH3 will not exhibit hydrogen bonding with itself in the liquid state.

d) CH3CH2NH2 will exhibit hydrogen bonding with itself in the liquid state.

e) CH3F will not exhibit hydrogen bonding with itself in the liquid state.

Learn more about hydrogen bonding on:

https://brainly.com/question/1426421

#SPJ11

When answering questions on the Brainly platform, it is important to always be factually accurate, professional, and friendly. It is also important to be concise and not provide extraneous amounts of detail, while using the relevant terms from the student question.Here is the answer to the student's question:

To calculate the partial pressure of argon gas in a mixture of gases, we can use the following formula:Partial pressure of gas = (Moles of gas / Total moles of gas) x Total pressure of mixture Given that the mixture of gases contains 0.50 moles of helium, 1.5 moles of argon, and 2.5 moles of neon and the total pressure of the mixture is 1.6 atm, we can find the partial pressure of argon as follows:Total moles of gas = 0.50 + 1.5 + 2.5 = 4.5 moles Moles of argon gas = 1.5 moles Partial pressure of argon gas = (1.5 / 4.5) x 1.6 atm= 0.5 x 1.6 atm= 0.8 atm Therefore, the partial pressure of argon gas in the given mixture of gases is 0.8 atm.

for more such question on moles

https://brainly.com/question/29367909

#SPJ11

The limiting reagent is TMSCl. This is because it is present in the smallest amount compared to all other reactants.

Amount is a noun used to describe the total number or quantity of something. It is used to refer to an aggregate of items, materials, or money. Amount can also be used figuratively to refer to an indefinite quantity that is not easily measured or counted. For example, one might say "there was an amount of people at the party".

Limiting reactants are the reactants that are used up first in a chemical reaction, and they limit the amount of product that can be formed. In this case, the amount of carvone and NaHCO3 (aq) is greater than the amount of TMSCl, so TMSCl is the limiting reactant.

To learn more about amount

https://brainly.com/question/29367909

#SPJ1

The pH of the solution in case of titration after the addition of 40.0 ml KOH is 21.07.

The given balanced chemical equation is HClO (aq) + KOH (aq) → KClO (aq) + H2O (l).Calculate the pH for each case in the titration of 50.0 ml of 0.200 M HClO (aq) with 0.200 M KOH (aq). The ionization constant for HClO is given asKa = 3.0 × 10-8. To calculate the pH of the solution, we use the following formula:

pH = - log10[H+], The number of moles of HClO is: Moles = Molarity × Volume, Moles = 0.200 mol/L × 50.0 mL × 1 L/1000 mL = 0.010 mol. The number of moles of HClO decreases by the number of moles of KOH. Therefore, the number of moles of HClO left in the solution is0.010 mol - 0.008 mol = 0.002 mol. The number of moles of KClO formed is equal to the number of moles of KOH added, which is0.008 mol.

The number of moles of HClO that has reacted is also equal to the number of moles of KClO formed, which is0.008 mol. The number of moles of HClO remaining in the solution is 0.010 mol - 0.008 mol = 0.002 mol. The concentration of HClO is 0.002 mol/60.0 mL = 0.033 M. The concentration of KOH is0.008 mol/90.0 mL = 0.089 M. Using the ionization constant, we can calculate the pH for the titration of HClO with KOH, pH = pKa + log([A-]/[HA])

The H+ concentration is calculated as follows:[H+] = Ka × [HA] / [A-][H+] = (3.0 × 10-8) × 0.002 mol / 0.008 mol[H+] = 7.5 × 10-9 mol/L. The pH of the solution after the addition of KOH is pH

= 14.00 - pOHpOH

= - log10[OH-]pOH

= - log10(0.089)pOH = 1.05pH = 14.00 - 1.05 - log10[H+]pH = 12.95 - log10(7.5 × 10-9)pH = 12.95 + 8.12pH = 21.07

To know more about titration, refer here:

https://brainly.com/question/2728613#

#SPJ11

Sigma complexes are the intermediates for electrophilic aromatic substitution (eas). The intermediate complexes for nucleophilic aromatic substitution (SNAR) are called: pi complexes.

Pi complexes form when a nucleophile, or electron-rich species, attacks an electron-deficient atom in an aromatic ring. This attack displaces the electron-deficient atom, and a pi bond is formed between the nucleophile and the aromatic ring. The displacement of the electron-deficient atom results in the formation of an intermediate pi complex.

The pi complex is a key intermediate in SNAR reactions. The pi complex can then be attacked by another nucleophile, resulting in the formation of a new aromatic compound. During this reaction, the aromaticity of the ring is maintained and the stability of the pi complex is increased.

The pi complex is a key intermediate in the EAS mechanism. In order for the reaction to take place, the pi complex must be stable. This means that the electrons must be properly distributed around the ring and the nucleophile must be strongly bound to the electron-deficient atom.

This stability helps to ensure that the reaction will proceed efficiently and that the desired product is formed. In conclusion, the intermediate complexes for nucleophilic aromatic substitution (SNAR) are called pi complexes. Pi complexes form when a nucleophile attacks an electron-deficient atom in an aromatic ring.

The displacement of the electron-deficient atom results in the formation of an intermediate pi complex, which is then attacked by another nucleophile, resulting in the formation of a new aromatic compound. The stability of the pi complex is essential for the successful completion of the reaction.

To know more about electrophilic aromatic substitution refer here:

https://brainly.com/question/28286554#

#SPJ11

The rotational constant, B, of a molecule depends on its deuterated molecule mass and bond length. Isotopic exchange can change both of these parameters and therefore alter the rotational spectra of a molecule.

For the deuterated molecule, D79Br, the reduced mass will increase because the mass of the hydrogen atom is replaced with the heavier deuterium atom. The bond length is not expected to change significantly. The increased reduced mass will result in a decrease in the rotational constant, B, compared to H79Br.

For the bromine exchanged molecule, H81Br, the reduced mass is expected to be similar to that of H79Br, but the bond length will be longer due to the larger size of the 81Br isotope. The longer bond length will result in a decrease in the rotational constant, B, compared to H79Br.

Isotopic exchange generally decreases the rotational constant, B, because it increases the reduced mass or changes the bond length. The exchange of 1H or 79Br has a greater effect on the rotational spectra of a molecule depends on their relative contribution to the reduced mass and bond length of the molecule. In the case of H79Br, the bond length is largely determined by the H-Br bond, so the exchange of 79Br has a greater effect on the rotational spectra than the exchange of 1H. However, the effect of isotopic exchange on the rotational spectra can be complex and may also depend on other factors, such as the electronic structure of the molecule.

To learn more about deuterated molecule refer to:

brainly.com/question/28464502

#SPJ4

Answer:

The Waste Isolation Pilot Plant, or WIPP, is the world's first underground repository licensed to safely and permanently dispose of transuranic radioactive waste left from the research and productions of nuclear weapons.

The compound formed from the ionic interaction between a ion and ion is CsF (Cesium Fluoride). Both ions are isoelectronic with the atoms of a chemically unreactive period element. The Cs+ ion is isoelectronic with Xe while the F− ion is isoelectronic with Ne.

An isoelectronic species refers to atoms, molecules, or ions that have the same number of electrons. Isoelectronic species can include ions and neutral atoms that share the same number of electrons. The number of protons in the nucleus may be different for isoelectronic species, but the number of electrons is the same.

An ionic compound refers to a chemical compound formed by the combination of oppositely charged ions. In general, ionic compounds are formed between metallic and non-metallic elements. In ionic compounds, cations and anions combine to form a crystal lattice structure. These compounds are held together by strong electrostatic forces between oppositely charged ions. The resulting ionic bond is a strong bond, which makes ionic compounds quite stable.

CsF is the chemical formula for Cesium Fluoride. It is an ionic compound formed by the combination of cesium cation (Cs+) and fluoride anion (F-). CsF is a white crystalline solid at room temperature with a melting point of 684°C. It is commonly used in the synthesis of fluorinated organic compounds.

To learn more about "isoelectronic", visit: https://brainly.com/question/19157981

#SPJ11

molar heat of vaporization for liquid water is 40.6 kJ/mole. 15.54 kJ of energy is required to change 6.9 g of liquid water to steam if the water is already at 100°C.

To calculate the energy required to change 6.9 g of liquid water to steam, we need to use the formula:

q = n × ΔH_vap

where q is the energy required, n is the number of moles of water being vaporized, and ΔH_vap is the molar heat of vaporization for water, which is 40.6 kJ/mole.

First, we need to calculate the number of moles of water in 6.9 g of liquid water. We can do this using the molar mass of water, which is 18.015 g/mole:

n = m / M

n = 6.9 g / 18.015 g/mol

n = 0.383 moles

Now we can use this value of n and the molar heat of vaporization to calculate the energy required to vaporize the water:

q = n × ΔH_vap

q = 0.383 moles × 40.6 kJ/mole

q = 15.54 kJ

Learn more about vaporization here:

https://brainly.com/question/14578189

#SPJ1

Answer:

you will have to use T = 1/10