while the platform is rotating, the hanging mass remains attached to the test mass and is not removed from the platform. true or false

Answer:

Explanation:

La longitud de onda es la distancia que recorre una perturbación periódica que se propaga por un medio en un ciclo. La frecuencia es la cantidad de ondas que pasan por un punto durante un período de tiempo. El período es el tiempo que tarda una onda en completar un ciclo.

The turbine that takes the lesser amount of time to rotate through 1.0 radian of angular displacement is both because They take the same amount of time.

The relationship vt=ωr  which implies that doubling either the tangential velocity or the radius has no effect on the angular velocity. As a result, the 1.0 radian revolution is completed by both turbines in the same length of time and at the same rate of rotation.

A turbine is a device that converts fluid rotational energy captured by a rotor system into useful work or energy. In order to generate power, turbines either use mechanical gearing or electromagnetic induction.

Learn more about turbine at:

https://brainly.com/question/28168446

#SPJ1

The magnitude of the gravitational force exerted by the wire on the point mass m is: |F| = 2G(M*m/L^2)

To solve this problem, we need to first find the gravitational force exerted by each small segment of the wire on the point mass m, and then integrate the force over the entire semicircle.

Let's consider a small segment of the wire of length dl, located at a distance r from the center of curvature of the semicircle. The mass of this segment can be written as dm = M(dl/L), since the wire is uniform. The gravitational force exerted by this segment on the point mass m is given by:

dF = G*(dm*m)/(r^2)

where G is the gravitational constant.

Substituting dm, we get:

dF = G*(Mm/L)(dl/r^2)

Now we need to integrate this expression over the entire semicircle. Since the wire is bent into a semicircle, the distance r from the center of curvature varies from 0 to L/2. Thus, the total gravitational force exerted by the wire on the point mass m is:

F = integral of dF from r=0 to r=L/2

= G*(Mm/L) * integral of (dl/r^2) from r=0 to r=L/2

= G(Mm/L) * (1/0 - 1/(L/2)^2)

= 2G*(M*m/L^2)

For more such questions on gravitational force, click on:

https://brainly.com/question/24783651

#SPJ11

Between the point of projection and the point of maximum height, the mass's mechanical energy due to air resistance changes by -245 J.

The equation y = h + V y t  g t 2 / 2 y=h+Vytgt2/2 describes the vertical distance from the ground, where g represents the acceleration of gravity.

The work-energy concept may be used to compute the modification in mechanical energy of the mass brought on by air resistance:

ΔE = W_net

At the point of projection, the mechanical energy of the mass is:

E_i = 1/2 * m * v_i²

where m is the mass of the object, and v_i is the initial velocity.

E_i = 1/2 * 2.0 kg * (35 m/s)² = 1225 J

At the maximum height, the mass has zero velocity, so its mechanical energy is entirely potential energy:

E_f = m * g * h

E_f = 2.0 kg * 9.8 m/s² * 50 m = 980 J

The net work done on the mass is equal to the difference between its initial and final mechanical energies:

W_net = E_f - E_i

= 980 J - 1225 J

= -245 J

To know more about mechanical energy visit:-

https://brainly.com/question/29408366

#SPJ1

The smallest radius of the sphere before it is sent beyond our solar system is: 0.023 AU.

The smallest radius of a perfectly absorbing sphere with a density of 1000 kg/m³, which is gravitationally attracted to the Sun and is feeling a repulsive force due to radiation can be determined by following the given steps:

The gravitational force on the sphere at a distance of 1 AU from the sun is given by
F = GmM/r²F = 6.67 × 10⁻¹¹ × mM / (1.5 × 10¹¹)²F = 3.52 × 10⁻⁷mM

The repulsive force and the gravitational force on the sphere are equal when:r³ = L / 4πGcMm

Using the given values:r³ = (3.9 × 10²⁶) / (4π × 6.67 × 10⁻¹¹ × 2.998 × 10⁸ × (2 × 10³) × m sun × m)r³ = (1.46 × 10¹⁹) / m

The smallest radius of the sphere, beyond which it will be sent beyond the solar system is: r = (1.46 × 10¹⁹m³ / 1000kgm⁻³)¹∕³r = 3.44 × 10⁶ m, which is equivalent to 0.023 AU.

To know more about "Repulsive force" refer here:

https://brainly.com/question/30656894#

#SPJ11

Now you have the formula for the ratio of the radii of gold and iron wires with equal resistance.

To find the ratio of the radii of iron and gold wires with equal resistance, we'll use the formula for resistance in terms of resistivity, length, and cross-sectional area.
1. Write down the formula for resistance:
  R = ρ * (L/A), where R is resistance,

ρ is resistivity,

L is length, and

A is the cross-sectional area of the wire.
2. Recall that the cross-sectional area A of a wire is given by A = π *[tex]r^2[/tex],

where r is the radius of the wire.
3. Replace A in the resistance formula with the area formula:
  R = ρ * (L/(π * [tex]r^2)[/tex])
4. Set up an equation for both iron and gold wires with equal resistance:
  ρ_Iron * (L_Iron/(π * r_I[tex]ron^2[/tex])) = ρ_Gold * (L_Gold/(π * r_[tex]Gold^2)[/tex])
5. Since the lengths of the wires are equal, L_Iron = L_Gold.

Also, cancel out π on both sides:
  ρ_Iron * (L/(r_[tex]Iron^2)[/tex]) = ρ_Gold * (L/(r_[tex]Gold^2)[/tex])
6. Solve for the ratio of the radii squared:
  (ρ_Iron/ρ_Gold) = (r_[tex]Gold^2/r[/tex]_[tex]Iron^2[/tex])
7. Find the square root of both sides to get the ratio of the radii:
  √(ρ_Iron/ρ_Gold) = r_Gold/r_Iron

To find the actual ratio, look up the resistivities of iron and gold, and plug the values into the formula.

For similar question on resistance.

https://brainly.com/question/24858512

#SPJ11

A: The extraction and consumption of fossil fuels by humans have had significant environmental, social, and economic impacts. The burning of fossil fuels has resulted in increased greenhouse gas emissions, contributing to global climate change and its associated impacts such as rising sea levels, extreme weather events, and biodiversity loss. Fossil fuel extraction has also led to habitat destruction, air and water pollution, and negative health impacts on nearby communities. In addition, the use of fossil fuels has had significant economic and political implications, as countries rely on these finite resources for their energy needs.

B: Understanding the cause and effect relationships between humans and the removal of fossil fuels can help us make predictions about the future of these resources. By analyzing historical patterns of fossil fuel extraction and consumption, we can make projections about future availability and production. Additionally, by considering the environmental and social impacts of fossil fuels, we can anticipate the potential consequences of continued reliance on these resources, and the need for alternative energy sources. Such understanding can inform policy decisions, technological advancements, and societal behaviors that can mitigate negative impacts and ensure a sustainable energy future.

In order to make an energy analysis as easy as possible, the following objects should be included within the system: Data logging instrumentation, Microprocessor based controllers, and Electronic load controllers.

An Energy Analysis is a method of determining the energy consumption of a system. It is done to help identify and evaluate opportunities to reduce energy usage and cost, improve efficiency and reduce the environmental impact of the energy consumed.
Energy analyses assist in the identification of system inefficiencies and provide a basis for energy management decisions.

The objects included in the system to make energy analysis as easy as possible are as follows:

To know more about "Microprocessor" refer here:

https://brainly.com/question/30558959#

#SPJ11

= 1121.07 kPa ≈ 430 kPa

Therefore, the allowable net pressure that would limit the settlement to 2.5 in is 430 kPa.

Determine the allowable net pressure that would limit the settlement to 2.5 in.

A 10 m × 6 m mat foundation is placed at 6 ft depth in sand where the average value of n60 is 23. The allowable net pressure that would limit the settlement to 2.5 in is 430 kPa. The steps to determine the allowable net pressure are as follows:

Step 1: Convert the dimensions of the foundation to feetThe dimensions of the foundation are 10 m × 6 m. Converting them to feet, we get:

10 m × 3.281 ft/m

= 32.81 ft6 m × 3.281 ft/m =

19.68 ft

So the dimensions of the foundation are 32.81 ft × 19.68 ft.

Step 2: Convert the depth to feetThe depth is given in feet as 6 ft. So we don't need to convert it.

Step 3: Calculate the effective overburden pressureThe effective overburden pressure can be calculated using the formula:σ' = γDN60

where:σ' = effective overburden pressure (kPa)γ

D = effective unit weight of soil (kN/m³)N60

= standard penetration resistance corrected for energy efficiency to a depth of 60 cm

For sand, the effective unit weight can be assumed to be 110 lb/ft³ or 17.6 kN/m³. So,γD = 17.6 kN/m³The value of N60 is given as 23. So,σ' = 17.6 × 23σ' = 404.8 kPaThe effective overburden pressure is 404.8 kPa.

Step 4: Determine the allowable net pressureThe allowable net pressure can be determined using the formula:qa = (qs - σ') / F

where:qa = allowable net pressure (kPa)

qs = safe bearing capacity (kPa)

F = factor of safety

Since the settlement is limited to 2.5 in, the factor of safety can be taken as 3. The safe bearing capacity can be determined using the Terzaghi's bearing capacity equation:qs = cNc + γDNq + 0.5γBNγ

where:c = cohesion of soil (kPa)Nc, Nq, Nγ = bearing capacity factorsγ

B = saturated unit weight of soil below the foundation (kN/m³)

Assuming there is no cohesion in the soil (c = 0) and γB = 20 kN/m³, we get:

qs = 17.6 × 23 × 30 + 0.5 × 17.6 × 20 × 30

qs = 3768 kPa

So,qa = (qs - σ') / Fqa

= (3768 - 404.8) / 3qa

= 1121.07 kPa ≈ 430 kPa

Therefore, the allowable net pressure that would limit the settlement to 2.5 in is 430 kPa.

Learn more about cohesion of soil.

brainly.com/question/30250246

#SPJ11

The total distance described by the rubber ball before it comes to rest is 100 meters.

At the first drop, the ball falls from a height of 50 meters, and then rebounds to a height of 25 meters. So, the distance covered in the first drop and rebound is 50 + 25 = 75 meters.

At the second drop, the ball falls from a height of 25 meters and rebounds to a height of 12.5 meters. So, the distance covered in the second drop and rebound is 25 + 12.5 = 37.5 meters.

At the third drop, the ball falls from a height of 12.5 meters and rebounds to a height of 6.25 meters. So, the distance covered in the third drop and rebound is 12.5 + 6.25 = 18.75 meters.

This process repeats until the height of the rebound is less than 0.01 meters, at which point we consider the ball to have come to rest.

The total distance covered by the ball is the sum of all the distances covered during each drop and rebound, which is:

75 + 37.5 + 18.75 + 9.375 + 4.6875 + 2.34375 + ...

This is a geometric series with first term 75 and common ratio 1/2. Using the formula for the sum of an infinite geometric series, we get:

total distance = 75 / (1 - 1/2) = 100 meters.

For more questions like Distance click the link below:

https://brainly.com/question/28033813

#SPJ11

The energy flows from the sun to the grass, and then to the rabbit, while the carbon cycles between the atmosphere, the grass, and the rabbit.

What is Food Chain?

A food chain is a linear sequence of organisms, starting from producers and ending with top predators, that shows the transfer of energy and nutrients between different organisms in an ecosystem. The food chain illustrates how energy flows from one organism to another as they consume and are consumed by each other. The producers, such as plants, convert the energy from the sun into chemical energy through photosynthesis.

In this food chain, the sun provides energy to the grass through the process of photosynthesis. The grass then stores this energy in the form of carbohydrates, which the rabbit consumes as food. During cellular respiration in the rabbit's cells, the carbohydrates are broken down into carbon dioxide and water, releasing energy in the form of ATP. The carbon dioxide is then released back into the atmosphere through respiration or excretion, where it can be taken up by plants during photosynthesis, completing the carbon cycle.

Learn more about Food Chain from the given link

https://brainly.com/question/16504883

#SPJ1

Answer:

The speed of light is approximately 299,792 kilometers per second. If the distance from Earth to the Moon is 386,400 kilometers, then it would take light about 1.28 seconds to travel from Earth to the Moon.

As a result, light would need to travel from Earth to the moon for around 1.29 seconds.

On average, our planet and its sizable natural satellite are separated by roughly 238,855 miles (384,400 kilometres). As a result, the total amount of moonlight we observe is 1.255 seconds old, and it takes around 2.51 seconds for light to travel from the Earth to the moon.

we can use the following formula:

time = distance / speed

First, we need to convert the distance from kilometers to meters:

386,400 km = 386,400,000 meters

Now, we can calculate the time it will take light to travel from Earth to the Moon:

time = 386,400,000 meters / 299,792,458 meters per second

time

≈ 1.29 seconds

To know more about satellite visit:-

https://brainly.com/question/9266911

#SPJ1

The resistance of the wire is the slope of the line and it is 1.7

The resistance of a wire is a measure of how much it opposes the flow of electric current.

It is defined as the ratio of voltage across the wire to the current passing through it, and it is measured in ohms (Ω).

The resistance of the wire is the slope of the graph and this calculated by

=  change in the voltage / change in the current

= (5 - 0) / (3 - 0)

= 5 / 3

= 1.6667 approximately 1.7

Learn more about ohms at:

https://brainly.com/question/14296509

#SPJ1

The resultant force, F, and its duration, t, when the force is constant, are multiplied to create the force's impulse. Motion is changed by the impulse of force, which in turn modifies momentum.

To know more about force

https://brainly.com/question/30844931

#SPJ4

As the frequency of an AC source is increased, the current in an AC-RL circuit increases, up to the point where the inductive reactance of the inductor equals the resistance of the resistor. This is known as the resonant frequency of the circuit.

At the resonant frequency, the current reaches a maximum value and remains constant, regardless of further changes in the frequency. Above the resonant frequency, the current begins to decrease as the inductive reactance of the inductor increases faster than the resistance of the resistor. This is known as the anti-resonance frequency of the circuit.

In a series AC-RL circuit, the current is in phase with the voltage and the voltage and current are 90 degrees out of phase in a parallel AC-RL circuit. The total current in the circuit is determined by the frequency, inductance and resistance in the circuit, and the impedance of the circuit. The impedance is the ratio of the voltage to the current, and it increases as the frequency increases. This means that the current decreases as the frequency increases, as the inductor has an increasing inductive reactance.

The maximum current in the circuit is achieved when the inductive reactance of the inductor equals the resistance of the resistor, known as the resonant frequency of the circuit. Above the resonant frequency, the current begins to decrease as the inductive reactance of the inductor increases faster than the resistance of the resistor.

For more such questions on Resonant frequency.

https://brainly.com/question/28288820#

#SPJ11

Triton is a captured moon because of its highly inclined and retrograde orbit. Its capture might be relevant to its geological activity because it would have caused to undergo significant changes, which include the formation of cryovolcanoes, its internal structure.

Triton is a moon of Neptune that is thought to be a captured moon. The orbit of Triton is unlike any other moon in our solar system, as it is not in the equatorial plane of Neptune and is tilted at an angle of 23.5 degrees. Triton is thought to have been captured from the Kuiper Belt, a region of the solar system that lies beyond Neptune, and its capture was most likely caused by a collision between Neptune and a large Kuiper Belt object. The capture of Triton could be relevant to its geological activity as it may have caused the moon to heat up internally, leading to the formation of a subsurface ocean and cryovolcanism.

The capture of Triton could have caused it to heat up internally, which may have led to the formation of a subsurface ocean. This is because the capture of Triton would have involved a transfer of energy from Neptune to the moon, which would have caused it to heat up. The transfer of energy would have occurred due to tidal forces, which are caused by the gravitational attraction between Neptune and Triton. As Triton was captured, it would have been subjected to strong tidal forces that would have caused it to heat up, leading to the formation of a subsurface ocean.

Cryovolcanism is another geological activity that is associated with the capture of Triton. Cryovolcanism is the eruption of volatiles such as water, ammonia, and methane instead of lava. Triton is thought to have cryovolcanoes, which are similar to volcanoes on Earth, but instead of lava, they erupt water and other volatiles. The capture of Triton would have caused it to undergo significant changes, which would have included the formation of cryovolcanoes.

The capture of Triton could also have caused it to become a geologically active moon. This is because the capture of Triton would have caused it to undergo significant changes, which would have included the formation of cryovolcanoes. The geological activity of Triton may also be related to its internal structure, which is thought to be differentiated, meaning that it has a core, mantle, and crust.

The differentiation of Triton may have also played a role in its geological activity, as it may have caused the moon to be more geologically active than it would have been otherwise.

For more such questions on Triton.

https://brainly.com/question/16400576#

#SPJ11

To determine the time for the log to reach a speed of 0.5m/s with a constant force of 2500 n and a coefficient of kinetic friction between the ground and the log of 0.45, we can use the equation F = m * a, where F is force, m is mass, and a is acceleration.

Rearranging the equation to solve for a, we get a = F/m.

Since we know the force (2500 n) and the mass (300 kg), we can calculate the acceleration, a = 2500 n/300 kg = 8.33 m/s2.

Using the equation v2 = u2 + 2 * a * s, where v is the final velocity, u is the initial velocity, and s is the displacement, we can solve for the time it takes the log to reach a speed of 0.5m/s.

Since the initial velocity is zero, v2 = 0 + 2 * 8.33 m/s2 * s, where s is the displacement.

We know the final velocity is 0.5 m/s, so v2 = 0.52, or 0.25 m/s2.

Substituting this value into the equation, we get 0.25 m/s2 = 2 * 8.33 m/s2 * s, or s = 0.25/2*8.33 = 0.03 m.

Finally, we can use the equation t = v - u/a, where t is the time, to calculate the time it takes the log to reach a speed of 0.5m/s.

Since we know the initial velocity is zero, t = 0.5/8.33 = 0.06 s.

Therefore, it takes the log 0.06 seconds to reach a speed of 0.5m/s with a constant force of 2500 n and a coefficient of kinetic friction between the ground and the log of 0.45.

Learn more about determining the time for the log to reach a speed at: brainly.com/question/24177526

SPJ11

The difference in energy between the two stars with temperatures 10,000 K and 5,000 K is that the star with a temperature of 10,000 K has more energy than the star with a temperature of 5,000 K.

The degree or intensity of heat present in a substance or object, particularly expressed in degrees Celsius or Fahrenheit or as an equivalent in another scale is called temperature.Energy is the ability of a system or object to perform work on another object or system.Temperature is a measure of the amount of energy contained in a system or substance. The amount of energy in a substance or system is directly proportional to its temperature. Therefore, a substance with a higher temperature contains more energy than a substance with a lower temperature.

More on star temperature: https://brainly.com/question/28458370

#SPJ11

The actual angles a and b in the molecule of which this is a Lewis structure are approximately 120°.

Lewis structures are a method for representing molecules using symbols for atoms and dots to show shared pairs of electrons. In the actual molecule, the positions of the atoms and the angles between them are not necessarily exactly the same as in the Lewis structure. However, based on the Lewis structure, we can make some predictions about the arrangement of atoms and the angles between them using the concept of valence shell electron pair repulsion (VSEPR).

According to VSEPR theory, the valence electron pairs in the outer shell of an atom will try to move as far apart from each other as possible to minimize repulsion. This leads to certain geometric arrangements of atoms and electron pairs, and certain bond angles.For the Lewis structure shown in the image, there are three bonded pairs of electrons and one lone pair of electrons around the central nitrogen atom. This corresponds to a tetrahedral arrangement with a bond angle of 109.5°. However, the lone pair of electrons exerts greater repulsion than the bonded pairs, which compresses the bond angles slightly.

The actual angles a and b are approximately 120°, which is slightly less than the tetrahedral angle of 109.5°.Therefore, the answer is approximately 120°.

Learn more about Lewis structure: brainly.com/question/20300458

#SPJ11

The first two nonvanishing terms in V(z) for z » the radius of the ring are V(z) = Q/4πε0z + Qa2/4πε0z3. They correspond to the monopole and quadrupole moments, respectively.

he potential V(z) due to a ring of charge on the axis of symmetry can be expanded in a power series in z. The first two nonvanishing terms in this series are obtained by taking the limit z » the radius of the ring, which gives V(z) ≈ Q/4πε0z + Qa2/4πε0z3, where Q is the total charge on the ring and a is the radius of the ring.

The first term corresponds to the monopole moment, which represents the total charge of the ring. The second term corresponds to the quadrupole moment, which represents the deviation of the charge distribution from spherical symmetry. By symmetry, the dipole moment must be zero, since the charge distribution is symmetric about the axis of the ring.

To know more about dipole moment, here

brainly.com/question/28297887

#SPJ4

To calculate the volume of the bottle, we can use the fact that the difference in mass when the bottle is empty and full of alcohol is equal to the mass of the alcohol it contains. So:

Mass of alcohol = 47 g - 15 g = 32 g

We know that the density of alcohol is 0.8 g/cm³, so:

Density = Mass / Volume

0.8 g/cm³ = 32 g / V

Solving for V, we get:

V = 32 g / 0.8 g/cm³ = 40 cm³

Volume of water = 40 cm³

Mass of water = Density x Volume

Mass of water = 1 g/cm³ x 40 cm³ = 40 g

Volume of mercury = 40 cm³

Mass of mercury = Density x Volume

Mass of mercury = 13.6 g/cm³ x 40 cm³ = 544 g

More on density can be found here: https://brainly.com/question/15164682

#SPJ1

The resistance of a resistor with color bands violet-yellow-brown-gold is 740 Ω +/- 5%, and its tolerance is 5%. The numerical uncertainty of the resistor is 37 Ω.

Resistance: The violet-yellow-brown-gold-colored resistor's resistance value can be determined by reading the colors in the order they are printed. The value is determined as follows:

violet indicates 7, yellow indicates 4, brown indicates 1, and gold indicates a multiplier of 0.1.

Therefore, the resistance of this resistor is calculated as follows:

7 4 × 101 = 740 ohms.

Tolerance: The resistor's tolerance, which indicates the percentage variation in the resistance of the resistor from its nominal or theoretical value, is indicated by a fourth color band. The resistor's nominal resistance is calculated as follows:

740 ohms, with a tolerance of ±5%.

As a result, the tolerance is indicated by a gold-colored band.

Numerical Uncertainty: The numerical uncertainty of a resistor is calculated using the following equation:

Numeric uncertainty = (Tolerance/100) × Resistance

Numeric uncertainty = (5/100) × 740 = 37 ohms

Therefore, the numerical uncertainty of a resistor with color bands violet-yellow-brown-gold is 37 ohms.

In summary,

Resistance =  740 ohms

Tolerance = ±5%

Numerical uncertainty = 37 ohms

Know more about resistor here:

https://brainly.com/question/24858512

#SPJ11

The answer is no, the effects of reference frames are not symmetrical. This is due to the theory of relativity.

According to Einstein’s special theory of relativity, the simultaneity of two events can be different in different reference frames. This means that events that appear to be simultaneous in one frame may not be so in another. The difference between the reference frames is caused by the varying relative speeds between them, and this difference leads to an asymmetry in the effects of the frames.

Einstein introduced the theory of special relativity, which says that time is not absolute but relative to the observer's state of motion. Einstein demonstrated that time is affected by speed and gravity. He showed that when an object moves at a high speed, time slows down, which is known as time dilation. Time dilation only happens at extremely high speeds or in the presence of massive gravitational fields, which causes it to become significant.

For example, if one frame is moving at a very high speed relative to another, then events that are simultaneous in the first frame may appear to be not simultaneous in the second frame, and vice versa. This asymmetry is a key concept in special relativity and is one of the primary concerns of reference frames.

Therefore, the answer to the question is that the effects are not symmetric between frames.

To know more about the theory of relativity, refer here:

https://brainly.com/question/28289663#

#SPJ11

The only vehicle that is accelerating is: C: a race car that is rounding a sharp turn at a constant speed.

Acceleration refers to a change in velocity, which can mean a change in speed or direction. In the case of option C, the race car is constantly changing its direction, so it is experiencing acceleration even though its speed remains constant.

Option A is cruising at a steady speed, so it is not accelerating.

Option B is parked and not moving, so it is not accelerating.

What is velocity?

Velocity is a physical quantity that describes the rate and direction of the motion of an object. It is a vector quantity, which means it has both magnitude and direction.

The magnitude of velocity is the speed of an object in a given direction. For example, if a car is traveling at a speed of 50 miles per hour (mph) in the north direction, its velocity is 50 mph north.

The direction of velocity is the direction in which the object is moving. It is usually specified as an angle relative to a reference axis or direction. In the example above, the direction of the car's velocity is north.

To know more about velocity, viist:

https://brainly.com/question/17127206

#SPJ1

the string experiences max tension at the lowest point,

By Work energy theorem, the min speed required at the lowest point to complete a vertical circle is [tex]\sqrt{5gl}[/tex] where L is the length of the string, corresponding to this the max tension comes out to be 6mg=15N, thus we can say that the ball will never be able to complete the vertical circle,

this is the actual scenario, and the question is irrelavent.

but if need be, to get an answer,

at the top point,

T + mg = m[tex]v^{2}[/tex]/r

14 + 15 = 0.25*[tex]v^{2}[/tex]*2

[tex]\sqrt{58\\}[/tex] = v

Answer:

you Can Do it.please sub my because i'm stronger and i'm better

Two parallel wires separated by 2.20 cm each carry 43.0 A and experience a force of 0.700 N. If one wire is very long, so the length of the other wire is 2 × 10² m.

Given data:

Separation between two parallel wires, d = 2.20 cm

Current passing through wires, I = 43.0 AForce between two parallel wires, F = 0.700 N

We need to find the length of the wire.

Force between two parallel wires is given by the formula;

F = μ0 x I1 x I2 x L / d

where,

I1 and I2 are the current passing through wires L is the length of wire d is the distance between the two parallel wires

Substituting the values of the given data,

Therefore, the length of the other wire is 2 × 10² m.

Learn more about length: https://brainly.com/question/24487155

#SPJ11

when you run the program, it will allow you to select a two-column spreadsheet file, read its contents, and plot Y vs. X on an XY Graph as well as display the arrays in an indicator cluster labeled "XY Cluster"

Write a VI that reads and displays data from a two-column spreadsheet-formatted computer file?

To create a VI that reads and displays data from a two-column spreadsheet-formatted computer file, follow these steps:

Step 1: Open LabVIEW and create a new VI.

Step 2: Build the front panel by adding the necessary controls and indicators:
- Add a File Path control for the user to select the spreadsheet file.
- Add an XY Graph to display the plotted Y vs. X data.
- Add an indicator cluster labeled "XY Cluster" to display the X and Y arrays.

Step 3: Create the block diagram for your program:
- Add the "Read From Spreadsheet File" block. Connect the File Path control to the "file path" input of this block.
- Set the "delimiter" input of the "Read From Spreadsheet File" block to a comma (or the appropriate delimiter for your file).
- Add an "Index Array" block to separate the two columns of data. Connect the "2D array" output from the "Read From Spreadsheet File" block to the input of the "Index Array" block. Set the "Index" input to 0 to obtain the first column (X) and to 1 to obtain the second column (Y).
- Connect the X and Y outputs of the "Index Array" block to the XY Graph and the XY Cluster indicator on the front panel.

Step 4: Save the VI as "Your Name Chapter 7.vi".

Now, when you run the program, it will allow you to select a two-column spreadsheet file, read its contents, and plot Y vs. X on an XY Graph as well as display the arrays in an indicator cluster labeled "XY Cluster".

Learn more about spreadsheet.

brainly.com/question/8284022

#SPJ11

The capacitance of one of these axon membranes is 1.7× 10⁻⁸ Farad. The nervous system of the human body contains axons whose membrane each act as small capacitors.

The ability of a material object or device to store electric charge is referred to as capacitance. It is defined as the change in charge as a result of a difference in electric potential, expressed as a ratio of those quantities. There are two types of capacitance that are commonly recognized: self capacitance and mutual capacitance. An electrically charged object exhibits self capacitance, which is measured as the electric potential between the object and ground. Mutual capacitance is the measurement of capacitance between two components, and it is especially important in the operation of a capacitor, which is a basic linear electronic component designed to add capacitance to an electric circuit.

use formula ;

C = [tex]\frac{Q}{V}[/tex]

Q =   1.2x10⁻⁹C

V =  0.070 V

Charge C = 1.7× 10⁻⁸ Farad

To know more about Capacitance , visit ;

brainly.com/question/28445252

#SPJ1