which of the following reactions of alkenes takes place with syn stereospecificity? question 10 options: addition of bromine (treatment with br2) hydrogenation (treatment with h2/pt) addition of hbr (treatment with hbr) acid-catalyzed hydration (treatment with aqueous h2so4)

The sample prepared by dissolving 10.0 grams of NaCl in 1.0 liter of H₂O is a homogeneous mixture, which is described by option (2).

A homogeneous mixture is a mixture that has a uniform composition and properties throughout the sample. In this case, the NaCl molecules have been completely dissolved in the water molecules, resulting in a clear, colorless solution.

The NaCl and water molecules are distributed evenly throughout the sample, and the composition and properties of the solution are uniform in all parts of the sample. As a result, the sample is a homogeneous mixture.

Option (1) cannot be correct because NaCl and H₂O are two distinct compounds that have different properties and characteristics. Therefore, they cannot form a single homogeneous compound.

Option (3) cannot be correct because a compound is a substance composed of two or more different elements that are chemically combined in a fixed ratio. NaCl is a compound, but H₂O is also a compound, and they cannot chemically combine to form a heterogeneous compound.

Option (4) cannot be correct because a heterogeneous mixture is a mixture that is not uniform in composition and properties throughout the sample. This is not the case for the NaCl and H₂O solution, which is a homogeneous mixture.

To learn more about NaCl refer to:

brainly.com/question/1550455

#SPJ4

To identify a Lewis acid and base in a reaction, we might want to consider the steps below: :

In any chemical reaction, a Lewis acid is described a specie that can accept a pair of electrons, while a Lewis base is a species that can donate a pair of electrons.

In conclusion, in order  to identify a Lewis acid and base in a reaction, we will need to identify the species that can accept or donate a pair of electrons and go ahead to determine which one is the electron-pair donor and acceptor.

Learn more about lewis acid at: https://brainly.com/question/22126064

#SPJ1

The following will be more soluble in an acidic solution than in pure water is e. AgCl.

AgCl (silver chloride) would be more soluble in an acidic solution than in pure water. The solubility of AgCl in water is 0.00013 g/100 mL of water at 25 degrees Celsius, according to the solubility rules. Silver chloride solubility is influenced by the ion concentration in the solution, with higher ion concentrations resulting in greater solubility.

The solubility product constant, Ksp, of AgCl is very low, indicating that it is a sparingly soluble compound. When silver chloride is exposed to light, it decomposes into metallic silver and chlorine. The equation for the reaction is as follows:2 AgCl → 2 Ag + Cl2The other options that were given are not applicable to the given statement.

Learn more about solubility at:

https://brainly.com/question/14366471

#SPJ11

A compound that can convert a mixture of two enantiomers and diastereomers by reacting with them is called a resolving agent.

Resolving agents are typically chiral compounds that have the ability to selectively interact with one enantiomer or diastereomer in a mixture, leading to the formation of a product that can be separated from the remaining unreacted enantiomer or diastereomer.

Resolving agents can be used in a variety of applications, such as in the synthesis of chiral compounds, the separation of racemic mixtures into their individual enantiomers, and the determination of the absolute configuration of chiral compounds. Common examples of resolving agents include enzymes, chiral metal complexes, and chiral organic molecules such as tartaric acid and its derivatives.

Overall, the use of resolving agents is an important tool in the field of stereochemistry, allowing for the manipulation and separation of chiral compounds in a wide range of applications.

To learn more about enantiomers refer to:

brainly.com/question/21506956

#SPJ4

It is important to keep NaOH solution stoppered at all times when it is not in use because NaOH is a strong base that readily reacts with carbon dioxide (CO2) in air to form sodium carbonate (Na2CO3).

This reaction is exothermic, meaning that it releases heat, and it can also cause the solution to lose its concentration over time. By keeping the NaOH solution stoppered, exposure to air and carbon dioxide is minimized, which helps to maintain the purity and concentration of solution. In addition, the presence of sodium carbonate can interfere with many chemical reactions, so it is important to minimize its formation in the NaOH solution. Therefore, proper storage of NaOH solution is essential to maintain its quality.

To know more about sodium carbonate, here

brainly.com/question/13565765

#SPJ4

1 atom Au multiplied by 196.96655g/mol x 1mol/6.022 x 1023 atoms equals 3 x 10-22g Au  

An element's molar mass equals its atomic weight. In the instance of gold, Au, the molecular mass per mole is 196.967 grams.

Au molar mass = 196.96655 g/mol Convert ounces au to moles or moles to au gold to grams Composition percentage by ingredient Determine an organic compound's molecular weight.

As per the given details, the mass of one atom of gold (Au) is approximately 3.27 x [tex]10^_{-22[/tex] grams.

We may use the molar mass of gold and Avogadro's number to calculate the mass of one gold atom (Au). The particle density of Avogadro's number, abbreviated "NA," is roughly 6.022 x [tex]10^{23[/tex] particles per mole.

It is given that,

Molar mass of gold (Au) = 196.97 g/mol

Mass of one atom of gold = (Molar mass of gold) / (Avogadro's number)

Mass of one atom of gold = (196.97 g/mol) / (6.022 x [tex]10^{23[/tex] particles/mol)

Mass of one atom of gold ≈ 3.27 x [tex]10^_{-22[/tex] grams

Thus, the molar mass is 3.27 x [tex]10^_{-22[/tex] grams.

For more details regarding molar mass, visit:

https://brainly.com/question/31545539

#SPJ6

Heating a solution containing an enzyme usually decreases the enzyme's activity. The reason for this might be: heating the solution will denature the enzyme. The correct option is D.

This may be due to the fact that: heating increases the enzyme's temperature, which may have a variety of effects on the reaction. Enzyme reactions are catalyzed by proteins, which are sensitive to temperature changes. Temperature can cause the enzyme to denature, which causes a structural change in the protein, resulting in a loss of function.

The enzyme's substrate ability to bind will decline as the temperature rises. As a result, raising the temperature of the reaction will reduce the amount of available free energy due to the increased entropy of the reaction. The elevated temperature may also raise the activation energy of the catalyzed reaction.

Enzyme activity is influenced by the temperature and pH of the environment in which they are located. It is important to keep the enzymes at the appropriate temperature and pH level to avoid denaturation and maintain enzyme activity. Enzyme function can be adversely affected by environmental factors such as temperature, pH, and salt concentration.

To know more about enzymes refer here:

https://brainly.com/question/13050632#

#SPJ11

Complete Question:

It is usually the case that heating a solution containing an enzyme markedly decreases the enzyme's activity. What might be the reason for this?

a. The ability of a substrate to bind to its enzyme will decrease as temperature increases.

b. Increasing the temperature of a reaction will decrease the available free energy due to the increased entropy of the reaction.

c. The elevated temperature will increase the activation energy of the catalyzed reaction.

d. Heating the solution will denature the enzyme.

The expected chemical shift of an aliphatic ketone in a proton NMR spectrum is around δ 2.0-2.3 ppm.

The chemical shift is the location on the ppm scale that indicates the magnetic environment of a proton in a molecule. It is dependent on several factors, such as electron density, hybridization state, and neighboring atoms. In aliphatic ketones, the carbonyl group (C=O) usually appears in the region of δ 2.0-2.3 ppm.

This chemical shift results from the deshielding effect of the carbonyl group, which withdraws electron density from the carbon and its attached protons. The deshielding effect dominates over any shielding effect from the alkyl groups attached to the carbonyl carbon. As a result, the carbonyl proton has a higher chemical shift compared to other protons in the molecule.

Other protons in the molecule may have different chemical shifts, depending on their environment. The actual chemical shift value of the carbonyl proton may vary slightly, depending on the specific compound's structure and the experimental conditions.

To know more about NMR spectrum, refer here:

https://brainly.com/question/30465030#

#SPJ11

Reference table F lists the solubility of various compounds in water at 25°C. According to the table, the solubility of silver iodide in water is 1.5 x 10⁻³ grams per 100 grams of water.

This means that at 25°C, 1.5 x 10⁻³ grams of silver iodide will dissolve in 100 grams of water.

Silver iodide is a sparingly soluble compound, which means that it has low solubility in water. This is due to the ionic nature of silver iodide, which results in strong attractive forces between the ions in the solid form.

As a result, only a small amount of silver iodide can dissolve in water, even at high temperatures. This low solubility has important implications for the use of silver iodide in various applications, including photography and cloud seeding.

To know more about silver iodide, visit:

https://brainly.com/question/30010042

#SPJ1

A and B Did an acid donate a hydrogen ion to become a conjugate acid? Did a base accept a hydrogen ion to become a conjugate base? should be asked to determine if the reaction supports the Brønsted-Lowry model of acids and bases.

In the Bronsted-Lowry hypothesis, proton transport between chemical species is used to characterize acid-base interactions. Any species that can transfer a proton, H, is a Bronsted-Lowry acid and a base is any species that can accept a proton. Based on whether a species receives or donates protons or H+, the Bronstad-Lowry acid-base theory (also known as the Bronsted Lowry theory) distinguishes between strong and weak acids and bases. The hypothesis states that when an acid and base interact, the acid forms its conjugate base and the base forms its conjugate acid by exchanging a proton.

Learn more about Brønsted-Lowry model here:

https://brainly.com/question/28145336

#SPJ4

Answer: 63.92%

Explanation:

159.62 / 249.72 * 100 = 63.92. This means that a 100-gram sample of copper sulfate pentahydrate will contain 63.92 grams of copper sulfate. I hope this helps!

Molecular compounds are compounds that generally contain non-metals and are often gases or liquids. These compounds usually have low melting points, which is due to their molecular nature. This type of compound is characterized by the use of covalent bonds to hold the atoms together.

Covalent bonds are formed when two atoms share the same electron, whereas ionic bonds are formed when one atom transfers electrons to another atom. This type of compound does not contain any metals, so the atoms form a molecular lattice structure instead of an ionic lattice structure.

The molecules created from covalent bonds are much more stable than those formed from ionic bonds, making them more likely to remain as gases or liquids. Molecular compounds are important components of many everyday materials, such as plastics and fabrics, and they play an important role in the chemical industry.

Know more about Molecular compounds here

https://brainly.com/question/20920787#
#SPJ11

One potential source of error could be a measurement error, either in the volume of water added or in the temperature of the water. Another potential source of error could be a problem with the calibration of the thermometer used to measure the temperature of the water.

However, one of the most likely sources of error in this case is the presence of air bubbles in the erlenmeyer flask during the experiment. Air bubbles can act as an insulator, trapping heat and preventing the water from reaching the same temperature as the rest of the water in the flask. This can result in an inaccurate measurement of the water's temperature and ultimately affect the calculation of the experimental data.

To reduce the impact of air bubbles in future experiments, it is recommended to ensure that the erlenmeyer flask is thoroughly cleaned and free of any debris or contaminants that may trap air bubbles. Additionally, carefully swirling the flask during the heating process can help to dislodge any trapped air bubbles and ensure that the water is evenly heated.

To learn more about flask refer to:

brainly.com/question/15175183

#SPJ4

The silver ion concentration [Ag] for a saturated solution of Ag2CO3, if the Ksp for Ag2CO3 is 8.44 10-12, is 7.30 10-6 M.

What is Ag2CO3?

Ag2CO3, or silver carbonate, is a chemical compound made up of silver, carbon, and oxygen. This inorganic compound is an important precursor for the production of silver-based materials. It is utilized in the creation of mirrors, glass coatings, and catalysts.

A chemical equation is used to describe the dissolution of Ag2CO3 in water, which leads to the creation of Ag+ ions and CO32- ions:

Ag2CO3(s) ⇌ 2Ag+(aq) + CO32−(aq)

What is Ksp?

The equilibrium constant for the solubility product, known as Ksp, is a measure of the tendency of a substance to dissolve in water. Ksp is the product of the concentrations of the dissolved ion powers in a solution, each raised to the power of their stoichiometric coefficients at the solubility equilibrium.

It is a temperature-dependent variable.

The solubility of a substance in water can be calculated using Ksp.

The formula for calculating the Ag2CO3 equilibrium constant is given below:

Ag2CO3(s) ⇌ 2Ag+(aq) + CO32−(aq)Ksp = [Ag+]^2 [CO32-]

Concentration of [Ag+] is 7.30 × 10^-6 M

The concentration of [CO32-] is 4.36  106 M since 2 moles of Ag+ ions are formed for every 1 mole of Ag2CO3 dissolved, and one mole of carbonate ions is produced.

Thus, [CO32-] = 0.5 × [Ag2CO3] = 0.5 × [Ag+]^2

The Ksp of Ag2CO3 is [tex]8.44 * 10^{12}[/tex]

The values can be substituted into the Ksp formula:

[Ag+]^2 × 0.5[Ag+]^2 = Ksp[Ag+]^4 = Ksp × 2/0.5[Ag+]^4 = 8.44 × 10^-12 × 2/0.5[Ag+]^4 = 3.38 × 10^-11[Ag+] = √(3.38 × 10^-11)[Ag+] = 7.30 × 10^-6 M

The silver ion concentration [Ag] for a saturated solution of Ag2CO3, if the Ksp for Ag2CO3 is 8.44  * 10^{12}, is 7.30  [tex]10^{6}[/tex] M

To know  more about the Ksp https://brainly.com/question/27132799

#SPJ11

6.53 1026 formula units of  [tex]\rm Cr_3(PO_4)_2[/tex] are contained in roughly 32.45 moles of  [tex]\rm Cr_3(PO_4)_2[/tex].

We may use the following procedures to determine how many atoms make up the 32.45 moles of [tex]\rm Cr_3(PO_4)_2[/tex]:

Using Avogadro's number, which is the number of particles (atoms, molecules, or ions) per mole of a substance, we may convert from moles to the number of particles. There are roughly [tex]6.022 \times 10^{23[/tex] particles per mole according to Avogadro's number.

Hence, we can perform the following computation to convert 32.45 moles of  [tex]\rm Cr_3(PO_4)_2[/tex] to the quantity of  [tex]\rm Cr_3(PO_4)_2[/tex]'s formula units (ions):

32.45 mol [tex]\rm Cr_3(PO_4)_2\times 6.022 \times 10^{23[/tex] formula units/mol = [tex]1.955 \times 10^{25[/tex] formula units [tex]\rm Cr_3(PO_4)_2[/tex]

to know more about moles here:

brainly.com/question/26416088

#SPJ1

The correct option among the following is (c) it includes the balanced chemical reaction and the change in enthalpy value is true of a thermochemical equation.

A thermochemical equation is a chemical equation that depicts the complete thermochemical reaction. It contains the balanced equation and a written interpretation of the net energy change.

The term "enthalpy of reaction" refers to the heat energy released or absorbed in a chemical reaction at a constant pressure.

Thermochemical equations are written in the same way as chemical equations, with the exception that they also include the change in enthalpy value (ΔH) for the reaction.

The change in enthalpy value reflects the energy absorbed or released by the reaction in the form of heat.

To know more about enthalpy, refer here:

https://brainly.com/question/13996238#

#SPJ11

A halogen molecule's molecular weight, which is defined by the number of electrons and other atomic characteristics, is closely connected to the boiling point of the molecule. The boiling point of a molecule rises with molecular mass.

Going down group 7, the halogens' melting and boiling points rise. This is due to the bigger molecules as you move down to group 7. Stronger intermolecular forces develop.

Fluorine's boiling point of -188°C, Chlorine's of -34.6°C, Bromine's of 58.8°C, and iodine's of 184°C, as well as the trend in melting temperatures, are explained by the strengthening intermolecular interactions that bind the halogen molecules together.

To know more about molecular weight visit:-

https://brainly.com/question/27988184

#SPJ1

The final temperature of the mixed water after heat transfer is 46.9°C.

We can use the formula that gives the final temperature after mixing two different temperatures of water.

Using the formula for mixing different temperatures of water:

Q = mC∆T, where m is the mass of water, C is the specific heat of water,  ∆T is the temperature difference between the initial and final temperature of the water after mixing, and Q is the heat transferred.

Then, Q₁ = Q₂ using the formula above.

The final temperature of the mixed water is determined by the equation:

T = (m₁*T₁ + m₂*T₂)/(m₁ + m₂).

In this case, the mass of the first water is 100.0 g and its temperature is 24.9°C, and the mass of the second water is 75.0 g and its temperature is 76.4°C. Therefore, the final temperature is calculated as follows:

T = (100.0 g * 24.9°C + 75.0 g * 76.4°C) / (100.0 g + 75.0 g)

T = (2490 g * °C + 5730 g * °C) / (175.0 g)

T = (8220 g * °C) / (175.0 g)

T = 46.9°C


Therefore, the temperature is 46.9°C.

To know more about heat, refer here:

https://brainly.com/question/13433948#

#SPJ11

ask

ask the question bro, i will be ready to assist.

maths/ch3m/physics/bio

Answer:

True

Explanation:

(with a manganese dioxide catalyst)

So the number of moles of H₂SO₄ produced is also 5.0 moles. Therefore, the answer is 5.0 moles of sulfuric acid.

To find the number of moles of sulfuric acid produced, we must first identify the chemical equation for the reaction between sulfur dioxide and oxygen to produce sulfuric acid.A balanced chemical equation for the reaction between sulfur dioxide and oxygen to produce sulfuric acid is as follows:

2SO₂(g) + O₂(g) + 2H₂O(l) → 2H₂SO₄(l)

From the equation above, we can see that the mole ratio of SO₂ to H₂SO₄ is 2:2 or 1:1, which means that for every mole of SO₂ that reacts, we produce one mole of H₂SO₄.

We are given that 5.0 moles of SO₂2 react, so the number of moles of H₂SO₄ produced is also 5.0 moles. Therefore, the answer is 5.0 moles of sulfuric acid.

Learn more about moles on:

https://brainly.com/question/29367909

#SPJ11

The pH of the 0.079 M NH4Cl solution at 25°C is approximately 5.54.

To find the pH of a 0.079 M NH4Cl solution at 25°C, we will first find the H3O+ concentration using the weak acid dissociation constant (Ka) for NH4+.

1. Write the dissociation equation for NH4+:

NH4+ (aq) ↔ NH3 (aq) + H3O+ (aq)

2. Determine the Ka for NH4+ using the relationship between Kb (1.8 × 10⁻⁵) and Kw (1.0 × 10⁻¹⁴):

Ka = Kw / Kb = (1.0 × 10⁻¹⁴) / (1.8 × 10⁻⁵) ≈ 5.56 × 10⁻¹⁰

3. Set up an ICE table to find the equilibrium concentrations of the species:

  NH4+    NH3   H3O+
I: 0.079    0     0
C: -x       +x    +x
E: 0.079-x  x     x

4. Write the Ka expression and substitute equilibrium concentrations:

Ka = (x × x) / (0.079 - x)

5. Since Ka is very small (5.56 × 10⁻¹⁰), we can assume that x is much smaller than 0.079, so we can simplify the expression:

Ka ≈ (x × x) / 0.079

6. Solve for x, which represents the H3O+ concentration:

x = √(Ka × 0.079) = √(5.56 × 10⁻¹⁰ × 0.079) ≈ 2.90 × 10⁻⁶

7. Calculate the pH using the formula pH = -log[H3O+]:

pH = -log(2.90 × 10⁻⁶) ≈ 5.54

You can learn more about pH at: brainly.com/question/3050355

#SPJ11

The initial pH of the buffer solution is 4.76, the pH after the addition of 0.0050 mol of HCl is 4.63, and the pH after the addition of 0.0050 mol of NaOH is 4.89.

A buffer solution contains a weak acid and its corresponding salt, or a weak base and its corresponding salt. A buffer solution maintains a stable pH when an acid or a base is added to it. The following are the steps to solve the given problem.

The initial pH of a buffer solution can be calculated by the Henderson-Hasselbalch equation.

The addition of HCl will consume the acetate ions and increase the concentration of H+. The new buffer concentration will have a lesser concentration of acetate ion than the acetic acid, and the pH will decrease. Let x be the change in concentration of acetate ion, and 0.0050 - x be the new concentration of acetate ion.

The concentration of acetic acid is 0.250 M. After calculating x, the new pH can be calculated.

pH = pKa + log [A-]/[HA]x = 0.0050 mol/L of acetate ion consumed.

The concentration of the remaining acetate ion

= 0.250 - x0.250 - x = 0.2450 mol/L of acetate ion remaining [H+] = 0.0050 mol/L HCl added.

initial pH = 4.76

New pH = pKa + log [A-]/[HA] = 4.76 + log [0.2450]/[0.250] + log [0.0050]/[0.2450]

New pH = 4.63

The addition of NaOH will consume H+ ions and generate acetate ions. The new buffer concentration will have a greater concentration of acetate ion than the acetic acid, and the pH will increase.

Let y be the change in concentration of H+ ion, and 0.0050-y be the new concentration of H+ ion. The concentration of acetate ion is 0.250 M. After calculating y, the new pH can be calculated.

pH = pKa + log [A-]/[HA]y = 0.0050 mol/L of H+ ion consumed.

The concentration of the remaining H+ ion = 0.0050 - y0.250 + y = 0.2550 mol/L of acetate ion remaining[OH-] = 0.0050 mol/L NaOH added

initial pH = 4.76

New pH = pKa + log [A-]/[HA] = 4.76 + log [0.2550]/[0.250] - log [0.0050]/[0.2550]

New pH = 4.89

Therefore, the initial pH of the buffer solution is 4.76, the pH after the addition of 0.0050 mol of HCl is 4.63, and the pH after the addition of 0.0050 mol of NaOH is 4.89.

Learn more about pH on:

https://brainly.com/question/172153

#SPJ11

The two common regenerated fibers are viscose rayon and lyocell. Both viscose rayon and lyocell have similar properties to natural fibers such as cotton and silk, but with the added benefit of being more affordable and easier to produce in large quantities.

Viscose rayon is a regenerated cellulose fiber made from wood pulp or cotton linters, and it has been used in the textile industry since the early 1900s. The manufacturing process involves dissolving the wood pulp or cotton linters in a chemical solution to form a viscous solution, which is then extruded through a spinneret and solidified into fibers.

Lyocell, also known as Tencel, is a newer type of regenerated cellulose fiber made from wood pulp, usually from eucalyptus trees. The manufacturing process for lyocell is more environmentally friendly than that of viscose rayon, as it uses a closed-loop process that recycles the solvent used in the production process. The resulting fibers are strong, durable, and moisture-absorbent, making them popular for use in clothing and textiles.

to know more about natural fibers, visit: brainly.com/question/9318560

#SPJ4

In X-ray photoelectron spectroscopy (XPS), the energy of the emitted photoelectron is dependent on the binding energy of the sample. However, this is not necessarily true for an Auger electron.

In Auger electron spectroscopy (AES), an atom is ionized by an incident X-ray photon, and the resulting core hole is filled by an outer-shell electron. This process releases energy, which can be detected as an Auger electron. The energy of the Auger electron is dependent on the energy released in the filling of the core hole, rather than the binding energy of the sample.

The energy released in the filling of the core hole depends on the specific electronic configuration of the atom, rather than the binding energy of the sample. Therefore, the energy of an Auger electron is not necessarily dependent on the binding energy of the sample, but rather on the specific electronic transitions that occur during the Auger process.

To learn more about electrons refer to:

brainly.com/question/28977387

#SPJ4

Answer:

1. chlorine

2. hydrogen sulfide

3. phosphorus pentoxide

4. Oxygen difluoride

5. Phosphorus trichloride

6.Phosphorus pentoxide

7.Carbon disulfide

8.Nitrogen dioxide

9. Carbon monoxide

Explanation:

From periodic table:  

Zn = 65.38    gm/mole         X 3 =196.14  

P= 30.974

O = 15.999                           X 4 =63.996

Total mole wt = 291.11  gm     of which  196.14 is Zn

196.14 / 291.11 x 100% = 67% Zn

(NOTE that the sample mass of 25.5 g is irrelevant)

C. Acacia bush. The diagram shows that the acacia bush is only connected to the impala, so the loss of the acacia bush would only affect the impala consumer.

The other producers (star grass, red oat grass) are connected to multiple consumers, so the loss of these producers would affect more types of consumers.A huge genus of trees and shrubs of the pea family Fabaceae's subfamily Mimosoideae is known as Acacia bush, sometimes known as Wattles or Acacias. It originally consisted of a collection of plants with natural ranges across Africa and Australia. In food chains, consumers can be found alongside producers and decomposers, two additional groups. All plants are producers because they generate their own energy through photosynthesis using sunshine and nutrients. On the top trophic level of the food chain, plants are present.

learn more about nutrients Refer:brainly.com/question/15077704

#SPJ1

When a diprotic acid is titrated with a strong base, and the Ka1 and Ka2 are significantly different, then the pH vs. volume plot of the titration will have two distinct equivalence points. Thus, the correct answer is option C. For diprotic acids, the two acidic hydrogens (H+) are not lost at the same pH value.

The titration of a diprotic acid with a strong base yields two distinct pH curves as shown in the figure. The plot is also called a two-stage titration graph. The plot is divided into two stages because of the two dissociation steps of the diprotic acid. Titration curve for a diprotic acid. The curve has two equivalence points.

The first equivalence point corresponds to the reaction of the first hydrogen ion (H+) from the diprotic acid with the strong base. The pH at the first equivalence point is generally less than 7 because the salt of the weak acid is an acidic solution.

The second equivalence point occurs when all of the hydrogens have been neutralized. The pH at the second equivalence point is greater than 7 because the salt of the weak acid is a basic solution.

For more details about diprotic click here:

https://brainly.com/question/9434046#

#SPJ11

The balanced equation is NaI  → Na⁺ + I⁻, the entropy change is greater for the dissolution of NaI compared to the dissolution of NaBr is iodide has weaker ion-dipole interactions with water than bromide. Option D is correct, the change in free energy is  -16.4 kJ/mol, and  the dissolution of 1.00 mol of NaBr at 298.15 K is -4.07 kJ/mol.

The Balanced equilibrium equation for the dissolution of NaI in water:

NaI (s) → Na⁺ (aq) + I⁻ (aq)

Iodide having a weaker ion-dipole interactions with water than bromide. This is because the larger size of iodide ion causes weaker electrostatic interactions with water molecules compared to bromide ion. Thus, it requires more disorder or randomness to offset the loss of organization and ordering of water molecules. This results in a higher entropy change for the dissolution of NaI compared to NaBr.

ΔG° = ΔH° - TΔS°

ΔG° = (-7.50 kJ/mol) - (298.15 K)(74.0 J/mol.K)(1.02 mol)

ΔG° = -16.4 kJ/mol

The dissolution of 1.00 mol of NaBr at 298.15 K can be calculated using the following equation:

ΔG° = -RT ln(K)

where R is the gas constant, T is the temperature in Kelvin, and K is the equilibrium constant for the dissolution of NaBr in water.

Since NaBr is a strong electrolyte, it will dissociate completely in water:

NaBr (s) → Na⁺ (aq) + Br- (aq)

The equilibrium constant expression is:

K = [Na⁺][Br⁻]

At equilibrium, the concentration of Na⁺ and Br⁻ will be equal, so:

K = [Na⁺]²

The solubility of NaBr at 298.15 K is 90.7 g/L, which can be converted to mol/L:

90.7 g/L x (1 mol/102.89 g) = 0.881 mol/L

Therefore, [Na+] = [Br-] = 0.881 mol/L, and K = (0.881 mol/L)^2 = 0.775 mol/L.

Plugging in the values:

ΔG° = -8.314 J/mol.K x 298.15 K x ln(0.775 mol/L)

= -4.07 kJ/mol

To know more about entropy change here

https://brainly.com/question/4526346

#SPJ4