Which expression represents the second partial sum for ? 2(0. 4) + 2(0. 4)2 2(0. 4)2 + 2(0. 4)3 2 + 2(0. 4) 0 + 2(0. 4)1


timed

To find the maximums and minimums of the function f(x,y)=x^2+y^2+xy in the region {(x,y): x^2+y^2<=1}, we need to use the method of Lagrange multipliers.

First, we need to find the gradient of the function and set it equal to the gradient of the constraint (which is the equation of the circle x^2+y^2=1).

∇f(x,y) = <2x+y, 2y+x>
∇g(x,y) = <2x, 2y>

So, we have the equations:
2x+y = 2λx
2y+x = 2λy
x^2+y^2 = 1

Simplifying the first two equations, we get:
y = (2λ-2)x
x = (2λ-2)y

Substituting these into the equation of the circle, we get:
x^2+y^2 = 1
(2λ-2)^2 x^2 + (2λ-2)^2 y^2 = 1
(2λ-2)^2 (x^2+y^2) = 1
(2λ-2)^2 = 1/(x^2+y^2)

Solving for λ, we get:
λ = 1/2 or λ = 3/2

If λ = 1/2, then we get x = -y and x^2+y^2=1, which gives us the critical points (-1/√2, 1/√2) and (1/√2, -1/√2). We can plug these into the function to find that f(-1/√2, 1/√2) = f(1/√2, -1/√2) = -1/4.

If λ = 3/2, then we get x = 2y and x^2+y^2=1, which gives us the critical point (2/√5, 1/√5). We can plug this into the function to find that f(2/√5, 1/√5) = 3/5.

Therefore, the local maximum is (2/√5, 1/√5) with a value of 3/5, the local minimum is (-1/√2, 1/√2) and (1/√2, -1/√2) with a value of -1/4, and the absolute maximum is also (2/√5, 1/√5) with a value of 3/5, and the absolute minimum is on the border, which occurs at (0,1) and (0,-1) with a value of 0.

There are no critical points in the interior of the disk (not the border) that are not extremes or saddle points.
(i) Local extrema:
To find the local extrema, we first find the partial derivatives of f(x, y) with respect to x and y:

f_x = 2x + y
f_y = 2y + x

Set both partial derivatives equal to zero to find critical points:

2x + y = 0
2y + x = 0

Solving this system of equations, we find that the only critical point is (0, 0).

(ii) Absolute extrema:
To determine whether the critical point is an absolute maximum, minimum, or saddle point, we must examine the second partial derivatives:

f_xx = 2
f_yy = 2
f_xy = f_yx = 1

Compute the discriminant: D = f_xx * f_yy - (f_xy)^2 = 2 * 2 - 1^2 = 3

Since D > 0 and f_xx > 0, the point (0, 0) is an absolute minimum of the function.

(iii) Critical points and their classification:
The only critical point in the interior of the disk is (0, 0). As determined earlier, this point is an absolute minimum. No saddle points or other extrema are present within the interior of the disk.

To find any extrema on the boundary of the disk (x^2 + y^2 = 1), we use the method of Lagrange multipliers. However, as the boundary is not part of the domain specified in the question, we will not delve into that here.

Visit here to learn more about equation  : https://brainly.com/question/29538993
#SPJ11

No, quadrilaterals ABCD and EFGH are not similar because the ratio of their corresponding sides is not proportional.

In Geometry, two (2) quadrilaterals are similar when the ratio of their corresponding sides are equal in magnitude and their corresponding angles are congruent.

Additionally, two (2) geometric figures such as quadrilaterals are considered to be congruent only when their corresponding side lengths are congruent (proportional) and the magnitude of their angles are congruent.

Read more on quadrilateral here: brainly.com/question/6561516

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

A reasonable scale factor that could be applied to Shape 2 to create Shape 1 is 0.5.

When we talk about scaling a shape, we mean changing the size of the shape while maintaining its overall proportions.

This can be done by multiplying all of the dimensions of the shape by the scale factor.

For example, if we wanted to make a shape twice as big, we would multiply all of its dimensions (length, width, and height) by 2. If we wanted to make it half as big, we would multiply all of its dimensions by 0.5.

Looking at the two shapes, we can see that Shape 1 is half the size of Shape 2 in all dimensions.

For example, the height of Shape 1 is half the height of Shape 2, the width of Shape 1 is half the width of Shape 2, and the length of Shape 1 is half the length of Shape 2.

Therefore, to transform Shape 2 into Shape 1, we need to multiply all of its dimensions by 0.5. This will result in a scaled copy of Shape 2 that is identical in shape to Shape 1.

Learn more about scale factor

brainly.com/question/30215119

#SPJ11

The cash basis income for Carillo Industries is $41,000 and the accrual basis net income is $35,000.

The cash basis income for Carillo Industries, based on the cash received and paid during the year, is $41,000. The accrual basis net income, based on revenue and expenses earned/incurred during the year, regardless of whether cash was exchanged, is $35,000.

In 2020, Carillo Industries collected $108,000 from customers, of which $25,000 was for services performed in 2019 and $36,000 will not be collected until 2021.

The company paid $72,000 for expenses in 2020, of which $30,000 was for expenses incurred in 2019, and $42,000 of expenses in 2020 will not be paid until 2021. By calculating the cash and accrual basis, Carillo Industries can understand its financial performance from different perspectives.

Learn more about Carillo Industries

brainly.com/question/16891177

#SPJ11

Answer:

66.7%

Step-by-step explanation:

Let people asked bye x.

Then, people considering to change = 29% of x

People considering to become vegetarians = 23% of (29% of x)

                                                                          = 23/100 * 29x/100

                                                                          = 667x/10000

Percentage of people considering to become vegetarians = 667x/10

                                                                                                  = 66.7%

In the given ratio problem, Eli gets 21 sweets.

Let's assume that Dylan gets 7x sweets, Eli gets 3x sweets, and Fabian gets 5y sweets.

From the given information, we know that:

[tex]5y = 7x + 21[/tex] (since Fabian gets 21 more sweets than Dylan)

We can simplify this expression by dividing both sides by 5:

[tex]y = (7/5)x + 21/5[/tex]

We can also express the ratio of the amount of sweets that Dylan gets to the amount that Fabian gets as [tex]4:5[/tex], which means that:

[tex]4x = (5/1)y[/tex]

Substituting y from the first equation, we get:

[tex]4x = (5/1)*[(7/5)x + 21/5][/tex]

Simplifying this equation, we get:

[tex]4x = 7x + 21[/tex]

[tex]3x = 21[/tex]

[tex]x = 7[/tex]

Therefore, Dylan gets [tex]7x = 49[/tex] sweets, Eli gets [tex]3x = 21[/tex] sweets, and Fabian gets [tex]5y = 70[/tex] sweets.

Hence, Eli gets [tex]21[/tex] sweets.

To learn more about ratio problems,

brainly.com/question/28368900

#SPJ11

Answer :

Step-by-step explanation:

60 minutes = 1 hour

1 minute = 1/60

1 minute = 0.016666666666667 hours

1.47 minutes = 0.016666666666667 × 1.47

1.47 minute = 0.0245 hours

Therefore, 1.47 Minutes is equal to 0.0245 Hours.

The volume of the fish tank is approximately 3,693,142,608 cubic inches

To find the volume of the rectangular prism-shaped fish tank, we need to multiply its width, length, and height.

Given the dimensions are 2014 inches wide, 1012 inches long, and 1812 inches tall, the calculation is as follows:

Volume = Width × Length × Height

Volume = 2014 in × 1012 in × 1812 in

Upon calculating the product, we get:

Volume ≈ 3,693,142,608 cubic inches

The volume of the fish tank is approximately 3,693,142,608 cubic inches

N.B: None of the answer choices has the correct answer.

learn more about volume of prism from

https://brainly.com/question/23963432

#SPJ1

Waterways Corporation's budget for Q1 2022 involves sales, inventory, materials, labor, overhead, expenses, and financing.

Waterways Corporation is preparing its budget for the first quarter of 2022. The company has gathered information from its managers to begin the budgeting process.

The company expects unit sales to be 112,000 in November 2021, 104,000 in December 2021, and 113,000 in January 2022. The company also expects to keep 10% of next month's unit sales in ending inventory. The company collects 85% of Accounts Receivable in the month of sale and 15% in the month after sale.

Raw materials cost 80 cents per pound, and two pounds of direct materials are required to produce each unit. The company likes to keep 5% of the materials needed for the next month in its ending inventory.

Labor requires 12 minutes per unit, paid at a rate of $9 per hour. The company has variable selling and administrative costs of $1.60 per unit, including advertising, insurance, salaries, and depreciation. The company also plans to make a $480,000 equipment purchase in February.

The company's cash balance on December 31, 2021, was $99,000, but the management wants to maintain a cash balance of at least $700,000 starting on January 31, 2022. The company pays dividends each month at the rate of $2.70 per share for 4,610 shares outstanding.

The company has an open line of credit with Romney's Bank with borrowing terms of $1,000 increments at 9% interest. The company borrows on the first day of the month and repays on the last day of the month.

Learn more about Waterways Corporation

brainly.com/question/30681939

#SPJ11

(a) To find the curl of the vector field F(x, y, z), we first find its component functions:

F(x, y, z) = (5ex sin(y), 9ey sin(z), 2ez sin(x))

Then, we use the formula for the curl of a vector field:

curl F = (∂Fz/∂y - ∂Fy/∂z, ∂Fx/∂z - ∂Fz/∂x, ∂Fy/∂x - ∂Fx/∂y)

Plugging in the component functions of F(x, y, z), we get:

curl F = (2ez cos(x), -5ex cos(y), 9ey cos(z))

(b) To find the divergence of the vector field F(x, y, z), we use the formula for the divergence of a vector field:

div F = ∂Fx/∂x + ∂Fy/∂y + ∂Fz/∂z

Plugging in the component functions of F(x, y, z), we get:

div F = 5e^x sin(y) + 9e^y sin(z) + 2e^z sin(x)
(a) To find the curl of the vector field F(x, y, z) = (5e^x sin(y), 9e^y sin(z), 2e^z sin(x)), we need to compute the cross product of the del operator (∇) and F:

curl F = ∇ x F

curl F = ( (∂/∂y)(2e^z sin(x)) - (∂/∂z)(9e^y sin(z)), (∂/∂z)(5e^x sin(y)) - (∂/∂x)(2e^z sin(x)), (∂/∂x)(9e^y sin(z)) - (∂/∂y)(5e^x sin(y)) )

After computing the partial derivatives, we get:

curl F = ( 0, 5e^x cos(y) - 2e^z cos(x), 9e^y cos(z) - 5e^x cos(y) )

(b) To find the divergence of the vector field F(x, y, z), we need to compute the dot product of the del operator (∇) and F:

div F = ∇ ⋅ F

div F = (∂/∂x)(5e^x sin(y)) + (∂/∂y)(9e^y sin(z)) + (∂/∂z)(2e^z sin(x))

After computing the partial derivatives, we get:

div F = 5e^x sin(y) + 9e^y sin(z) + 2e^z sin(x)

learn more about vector field here: brainly.com/question/16180391

#SPJ11

The critical points and their classifications are:

(0, 1) - saddle point

(0, -1) - saddle point

(6, 1) - local minimum

(6, -1) - local minimum

To find the critical points of the function f(x, y) = x³ + y³ – 9x² – 3y - 6, we need to find the points where the partial derivatives of f with respect to x and y are zero.

∂f/∂x = 3x² - 18x = 3x(x - 6)

∂f/∂y = 3y² - 3 = 3(y² - 1)

Setting these partial derivatives equal to zero and solving for x and y, we get:

x = 0 or x = 6

y = ±1

So the critical points are (0, 1), (0, -1), (6, 1), and (6, -1).

To classify each critical point, we need to compute the second partial derivatives of f:

∂²f/∂x² = 6x - 18

∂²f/∂y² = 6y

∂²f/∂x∂y = 0

At (0, 1):

∂²f/∂x² = -18 < 0 (concave down)

∂²f/∂y² = 6 > 0 (concave up)

So (0, 1) is a saddle point.

At (0, -1):

∂²f/∂x² = -18 < 0 (concave down)

∂²f/∂y² = 6 > 0 (concave up)

So (0, -1) is a saddle point.

At (6, 1):

∂²f/∂x² = 18 > 0 (concave up)

∂²f/∂y² = 6 > 0 (concave up)

So (6, 1) is a local minimum.

At (6, -1):

∂²f/∂x² = 18 > 0 (concave up)

∂²f/∂y² = 6 > 0 (concave up)

So (6, -1) is a local minimum.

For more such questions on Critical points.

https://brainly.com/question/30889798#

#SPJ11

Using division operation with unit conversions, the length of ribbon that each of the 18 students in Mrs. Hinojosa's class gets is as follows:

a) 4.2 feet.

b) 4 feet and 2 inches

c) 50 inches.

Division and multiplication operations are used in unit conversions.

Unit conversions involve converting measurements from hours to minutes or seconds, centimeters to meters and miles, etc.

The total quantity of ribbon Mrs. Hinojosa had = 75 feet

1 foot = 12 inches

75 feet = 900 inches (75 x 12)

The number of students in the class = 18

The length of ribbon received by each student = 4.167 feet (75 ÷ 18)

The length of ribbon received by each student ≈ 4 feet and 2 inches

The length of ribbon received by each student in inches only = 50 inches (900 ÷ 18)

Learn more about unit conversions, division, and multiplication at https://brainly.com/question/4158962.

#SPJ1

To calculate the cost of each tile, we need to first determine the volume of each tile. The length and width of the tile are given as 16 inches, and the thickness is given as 1/4 inches, which can be converted to 0.25 inches. Therefore, the volume of each tile is 16 x 16 x 0.25 = 64 cubic inches.

Next, we need to determine the weight of gold in each tile. Since the density of gold is 11.17 ounces per cubic inch, the weight of gold in each tile is 64 x 11.17 = 715.68 ounces.

Finally, we can calculate the cost of each tile by multiplying the weight of gold by the price of gold per ounce. The price of gold is given as $1,303.80 per ounce, so the cost of each tile is 715.68 x $1,303.80 = $933,526.78. Rounded to the nearest dollar, each tile will cost $933,527.

In summary, each square tile made of solid gold and measuring 16 inches long and 1/4 inches thick will cost approximately $933,527. This cost is based on the density of gold, which is 11.17 ounces per cubic inch, and the price of gold, which is $1,303.80 per ounce.

To know more about  each tile, refer here

https://brainly.com/question/29906822#

#SPJ11

The amount of energy the refrigerator uses per day is 3.6 kilowatt-hour (kWh)

The refrigerator energy usage per day in BTU is 12283.704 BTU

The BTU is an acronym for the British Thermal Unit, which is a measure of heat, which is specified in energy units.

The duration the refrigerator fan runs per hour = 30 minutes

The amount of energy the refrigerator uses every hour = 300 watts × 0.5 hour/hour = 150 watts

The amount of energy the refrigerator uses per hour = 150 watt-hour

1 kWh = 3412.14 BTU

Therefore;

The amount of energy in BTU the refrigerator uses per day = 12283.704 BTU

Learn more on the BTU here: https://brainly.com/question/14252954

#SPJ1

To find the length of the ladder needed to reach the roof of the shed that is 35 ft from the ground with the base of the ladder 12 ft from the shed, you can use the Pythagorean theorem. The theorem states that in a right-angled triangle, the square of the length of the hypotenuse (the ladder, in this case) is equal to the sum of the squares of the other two sides (the height and the distance from the shed).

Step 1: Identify the sides of the triangle.
- Height (a): 35 ft (vertical side)
- Distance from the shed (b): 12 ft (horizontal side)
- Ladder length (c): Hypotenuse

Step 2: Apply the Pythagorean theorem.
- a² + b² = c²
- 35² + 12² = c²

Step 3: Calculate the squares and sum them.
- (35 * 35) + (12 * 12) = c²
- 1225 + 144 = c²
- 1369 = c²

Step 4: Find the length of the ladder (c).
- c = √1369
- c = 37

The ladder needs to be 37 ft long to reach the roof of the shed.

Shortening the distance between the ladder and the shed will affect the height of the ladder by making it steeper. This will cause the ladder to be higher above the ground, but it may also make it less stable and more difficult to climb.

To know more about Pythagorean theorem refer here

https://brainly.in/question/47213677#

#SPJ11

The equation for the line of symmetry for the function f(x) = -7x² + 14x -19 is x = 1.

The line of symmetry for a quadratic function, f(x) = ax² + bx + c, is a vertical line that passes through the vertex of the parabola, and its equation is given by x = -b/(2a). In the function f(x) = -7x² + 14x - 19, the coefficients are a = -7, b = 14, and c = -19.

Applying the formula, x = -b/(2a), we get:

x = -(14)/(2*(-7))

x = -14 / (-14)

x = 1

Thus, the equation for the line of symmetry for the function f(x) = -7x² + 14x - 19 is x = 1. This line divides the parabola into two symmetrical halves, and the vertex of the parabola lies on this line.

Learn more about line of symmetry here: https://brainly.com/question/19600666

#SPJ11

The solution of the system of equations is

A system of equations is a set of two or three equations.

Given the system of equations

x + y = 5 (1)

y + z = 6 (2)

z + x = 9 (3)

Givent he guide (1) - (2) x - z = - 1 (4), we proceed to solve the system of equations

Now, taking equations (3) and (4), we have that

z + x = 9 (3)

x - z = - 1 (4)

Adding them we have that

z + x = 9 (3)

+

x - z = - 1 (4)

2x = 9 - 1

2x = 8

x = 8/2

x = 4

From equation (3)

z = 9 - x

So, substituting the value of x into the equation, we have that

z = 9 - x

z = 9 - 4

z = 5

From equation (2)

y = 6 - z

So, substituting z into the equation, we have that

y = 6 - z

= 6 - 5

= 1

So,

Learn more about system of equations here:

https://brainly.com/question/28405823

#SPJ1

The approximate values of y at x = 0.1, 0.2, 0.3, and 0.4 are all equal to y1 = y2 = y3 = y4 = 0.5, as we only used the first step of Euler's method.

We can use Euler's method with a step size of 0.5 to approximate the solution of the given initial-value problem as follows:

First, we need to find the slope at the initial point (0, -3):

y' = 1 - 2x - 2y

y'(0, -3) = 1 - 2(0) - 2(-3) = 7

Using Euler's method, we can approximate the solution at x = 0.5:

y(0.5) ≈ y(0) + hy'(0, -3) = -3 + 0.57 = 0.5

Next, we can use the approximate value y(0.5) to approximate the solution at x = 1:

y(1) ≈ y(0.5) + hy'(0.5, 0.5) = 0.5 + 0.5(1 - 2(0.5) - 2(0.5)) = -0.5

Similarly, we can use the approximate value y(1) to approximate the solution at x = 1.5:

y(1.5) ≈ y(1) + hy'(1, -0.5) = -0.5 + 0.5(1 - 2(1) - 2(-0.5)) = -1.25

Finally, we can use the approximate value y(1.5) to approximate the solution at x = 2:

y(2) ≈ y(1.5) + hy'(1.5, -1.25) = -1.25 + 0.5(1 - 2(1.5) - 2(-1.25)) = -2.4375

Therefore, the approximate values of y at x = 0.1, 0.2, 0.3, and 0.4 are all equal to y1 = y2 = y3 = y4 = 0.5, as we only used the first step of Euler's method.

To learn more about Euler's method visit:https://brainly.com/question/14309211

#SPJ11

The probability of not rolling a multiple of 4 with the 6 sided dice is P =0.5

A 6D dice has the 6 outcomes {1, 2, 3, 4, 5, 6}, The ones that are a factor of 4 are:

{1, 2, 4}

Then 3 out of 6 outcomes are a factor of 4, thus, the other 3 aren't factors of 4.

Then the probability of not rolling a multiple of 4 is given by the quotient between the number of outcomes that arent multiples of 4 and the total number of outcomes.

P = 3/6 = 0.5

Learn more about probability at:

https://brainly.com/question/25870256

#SPJ1

The value of x is [tex]\sqrt{\frac{2}{6} }[/tex]

A function can be defined as a law or expression showing the relationship between two variables.

From the information given, we have that;

f(x) = x ^ 2 + 1

g(x) = 3x

To determine the composite function, substitute the value of the function inside the bracket and the value of x in the other function, we have;

fg(x) = (3x²) + 1

expand the bracket

fg(x) = 9x² + 1

Then,

gf(x) = 3(x² + 1)

expand the bracket

gf(x) = 3x² + 3

Equate the functions, we have;

9x² + 1 = 3x² + 3

collect the like terms

6x² = 2

Divide the value

x = [tex]\sqrt{\frac{2}{6} }[/tex]

Learn about functions at: https://brainly.com/question/11624077

#SPJ1

Answer:

8.81

Step-by-step explanation:

Substitute x for 7 and then solve normally

{2(7)^2+7-8}/(7)+4

{(2x49)+7-8}/11

98+7-8/11

97/11

8.81

Maximum and Minimum values of f(x, y) = xy on the ellipse 3x² + y² = 9.

The maximum value is 3

The minimum value is -3

To find the maximum and minimum values of f(x, y) = xy on the ellipse 3x² + y² = 9, follow these steps:

1. Use the constraint equation (ellipse equation) to solve for one of the variables, either x or y.

Here, let's solve for y:
y² = 9 - 3x²
y = ±√(9 - 3x²)

2. Substitute y in the function f(x, y) with the expressions found in step 1:
f(x, y) = x(±√(9 - 3x²))

3. Differentiate f(x, y) with respect to x to find critical points (maximum or minimum):
f'(x, y) = ±(√(9 - 3x²) - (3x² / √(9 - 3x²)))

4. Set f'(x, y) = 0 and solve for x:
√(9 - 3x²) - (3x² / √(9 - 3x²)) = 0

5. Find the corresponding y values for the x values found in step 4 by substituting x back into the expressions found in step 1.

6. Evaluate f(x, y) at each critical point (x, y) found in steps 4 and 5 to determine the maximum and minimum values.

The maximum value of f(x, y) = xy on the ellipse 3x² + y² = 9 is 3, and the minimum value is -3.

To know more about Maximum values:

https://brainly.com/question/14316282

#SPJ11

The graph representing the ice sheet's thickness (y) over time (x, in weeks) is a linear equation with a negative slope.

We are given the initial thickness of the ice sheet (2 meters) and its thickness after 3 weeks (1.25 meters). The rate of decrease in thickness is constant.

To find the slope, we can use the formula: (change in y) / (change in x). Here, the change in y is (1.25 - 2) = -0.75 meters, and the change in x is 3 weeks.

Therefore, the slope is -0.75 / 3 = -0.25 meters/week. The graph will be a straight line with a negative slope, indicating that the ice sheet's thickness is decreasing at a constant rate over time.

To know more about straight line click on below link:

https://brainly.com/question/30732180#

#SPJ11

Quadrilaterals have four sides, two diagonals, and the sum of their interior angles is 360 degrees.

Quadrilaterals are four-sided polygons that have two diagonals connecting opposite vertices. One of the most important properties of quadrilaterals is that the sum of their interior angles is always equal to 360 degrees. This means that a quadrilateral can be divided into two triangles, each of which has a total of 180 degrees. This relationship between triangles and quadrilaterals is useful when calculating the area of a quadrilateral.

The formula for calculating the area of a quadrilateral is A = B x H, where A is the area, B is the base, and H is the height. This formula is applicable to all types of quadrilaterals, regardless of their shape or size. However, different types of quadrilaterals have unique properties and formulas for calculating their area.

For example, a square is a type of quadrilateral that has four sides of equal length and four right angles. The formula for finding the area of a square is A = s², where s is the length of the side. A rectangle is a type of quadrilateral with two pairs of parallel sides and four right angles. The formula for calculating the area of a rectangle is A = L x W, where L is the length and W is the width.

A rhombus is another type of quadrilateral that has four sides of equal length, but its angles are not necessarily right angles. The formula for finding the area of a rhombus is A = (D₁ x D₂) / 2, where D₁ and D₂ are the lengths of the diagonals.

A trapezoid is a quadrilateral with one pair of parallel sides. The formula for finding the area of a trapezoid is A = ((B₁ + B₂) / 2) x H, where B₁ and B₂ are the lengths of the parallel sides, and H is the height between them.

Kites are quadrilaterals with two pairs of adjacent equal-length sides. The formula for finding the area of a kite is A = (D₁ x D₂) / 2, where D₁ and D₂ are the lengths of the diagonals.

In summary, all quadrilaterals share some common characteristics, such as having four sides, two diagonals, and the sum of their interior angles being equal to 360 degrees. However, different types of quadrilaterals have distinct properties and formulas for finding their area. By understanding these properties and formulas, one can solve problems involving different types of quadrilaterals.

Learn more about quadrilateral

brainly.com/question/29934440

#SPJ11

To find dy/dx implicitly, we need to differentiate both sides of the equation with respect to x, treating y as a function of x and using the chain rule.

In this problem, we are given the equation X^2e^{-x} + 3y^2 - xy = 0, and we need to find dy/dx. To do this, we first differentiate each term with respect to x, using the product rule for the xy term and the chain rule for the y^2 term. Then we can solve for dy/dx by isolating the derivative term on one side of the equation. Implicit differentiation is a powerful technique used in calculus to find derivatives of functions that are not easily expressed in terms of a single variable. This technique is used extensively in many areas of mathematics, science, and engineering, including optimization, physics, and economics.

For more similar questions on topic Derivatives calculation.

https://brainly.com/question/25324584

#SPJ11

The image of ABC under the translation by 1 unit to the right and 4 units up is the triangle with vertices A', B', and C'.

A triangle is a closed two-dimensional geometric shape with three straight sides and three angles. It is one of the basic shapes in geometry and has been studied since ancient times. To translate a figure by a given vector, you need to move each point of the figure by the same amount and in the same direction as the vector. In this case, we want to translate ABC by a vector of (1, 4), which means we need to move each point of ABC one unit to the right and four units up.

Let's say the coordinates of the points of ABC are:

A = [tex]\rm (x_1, y_1)[/tex]

B = [tex]\rm (x_2, y_2)[/tex]

C = [tex]\rm (x_3, y_3)[/tex]

To translate ABC by the vector (1, 4), we add 1 to each x-coordinate and 4 to each y-coordinate:

A' = [tex]\rm (x_1 + 1, y_1 + 4)[/tex]   (x₁ + 1, y₁ + 4)

B' = [tex]\rm (x_2 + 1, y_2 + 4)[/tex]   (x₂ + 1, y₂ + 4)

[tex]\rm C' = (x_3 + 1, y_3 + 4)[/tex]  (x₃ + 1, y₃ + 4)

Therefore, The image of ABC under the translation by 1 unit to the right and 4 units up is the triangle with vertices A', B', and C'.

To learn more about Triangle from given link.

https://brainly.com/question/30599944

#SPJ1

Answer:8

Step-by-step explanation:

The area of the parallelogram is 300 centimetres squared.

The length of the base is 20 centimetres. The length of the sides is 17 centimetres. The overhang of the base is 8 centimetres long. The angle between the overhang and the height is a right angle.

Therefore,

area of a parallelogram = b × h

where

Therefore, let's use Pythagoras's theorem to find the height of the parallelogram as follows
17² - 8² = h²

289 - 64 = h²

h = √225

h = 15 centimetres

Therefore,

area of the parallelogram = 20 × 15

area of the parallelogram = 300 cm squared

learn more on parallelogram here: https://brainly.com/question/9576767

#SPJ1

Answer:

Part 1: 73 periods

Part 2: 73 periods in 1 year - 365/5=73

Part 3: 0.075 periodic interest rate - 180/2400=0.075