Atoms fuse, increasing the average size atomic nuclei accurately describes the process stars use to convert matter into energy .option (b)
What is energy?In physics, energy (from the Ancient Greek v (enérgeia) 'activity') is a quantitative characteristic that is transmitted to a body or a physical system and is visible in the execution of labor as well as in the shape of heat and light. The rule of conservation of energy says that energy can be converted in shape but cannot be produced or destroyed. The joule is the International System of Units (SI) unit of measurement for energy. (J).
The kinetic energy of a moving object, the potential energy stored by an object (for example, due to its position in a field), the elastic energy stored in a solid object, chemical energy associated with chemical reactions, radiant energy carried by electromagnetic radiation, and internal energy contained within a thermodynamic system are all examples of common forms of energy
Learn more about energy
https://brainly.com/question/1932868
#SPJ1
What is the relative pH at the equivalence point of the titration of a weak acid with a strong base? OpH > 7 OpH = 7 OpH < 7
The relative pH at the equivalence point of the titration of a weak acid with a strong base is pH > 7.
The equivalence point in titration is the point at which the amount of added titrant is just enough to completely neutralize the analyte solution. The equivalence point can be found from an acid-base titration curve by the inflection point of the curve. In titration, the equivalence point occurs when the number of moles of titrant is equal to the number of moles of the analyte. For the titration of a weak acid with a strong base, the equivalence point will have a pH greater than 7. This is because the strong base will completely neutralize the weak acid and any excess base will increase the pH of the solution beyond neutrality.
In other words, the solution has become basic because of the excess hydroxide ions added from the titrant, despite the fact that the original substance being analyzed (acetic acid) was acidic. Therefore, the relative pH at the equivalence point of the titration of a weak acid with a strong base is greater than 7.
Know more about Equivalence point here :
https://brainly.com/question/24584140
#SPJ11
A scientist performs a set of experiments. One experiment involves two compounds at a normal concentration. Another experiment requires the scientist to lower the concentration of both compounds in the experiment. How will the second experiment be different from the first?
The reaction will stop completely.
The reaction rate will not change.
The reaction rate will increase.
The reaction rate will decrease.
The reaction rate will decrease in the second experiment when the concentration of both compounds is lowered. This is because the rate of a chemical reaction is directly proportional to the concentration of the reactants.
How does the concentration of reactants affect the rate of a chemical reaction?The rate of a chemical reaction is directly proportional to the concentration of the reactants.
This is because increasing the concentration of the reactants increases the number of reactant molecules available to collide with each other, which results in a faster reaction rate.
What other factors can affect the rate of a chemical reaction, besides reactant concentration?Other factors that can affect the rate of a chemical reaction include temperature, pressure, the presence of a catalyst, and the surface area of solid reactants. Increasing temperature, pressure, or the surface area of solid reactants generally leads to a faster reaction rate, while the presence of a catalyst can increase the rate of a reaction without being consumed in the process.
To know more about compound,visit:
https://brainly.com/question/13516179
#SPJ1
QuestionThe colours of red litmus paper in acidic, neutral, and basic solutions are:Ared, orange and blue respectivelyBblue, violet and red respectivelyCred, colourless and blue respectivelyDred, red and blue respectivelyHard
The colors of red litmus paper in acidic, neutral, and basic solutions are: C. red, colorless, and blue respectively.
Red litmus paper is used to test whether or not a solution is acidic in chemistry. It's utilized to detect the acidity or alkalinity of a substance. In acidic or neutral solutions, red litmus paper remains red. It will turn blue when it comes into contact with basic solutions. Red litmus paper is a pH indicator. It alters color based on the pH of the substance in which it is dissolved.
Litmus paper is a pH paper that is produced using lichen dyes. It's a paper that has been treated with litmus, which is a water-soluble mixture of different dyes obtained from lichens. Litmus paper's two colors, blue and red, are produced from litmus. The blue litmus paper turns red in acidic solutions and turns blue in basic solutions. Conversely, red litmus paper turns blue in basic solutions and remains red in acidic or neutral solutions. Therefore, Option C is Correct.
The Question was Incomplete, Find the full content below :
The colours of red litmus paper in acidic, neutral, and basic solutions are:
A. red, orange and blue respectively
B. blue, violet and red respectively
C. red, colourless and blue respectively
D. red, red and blue respectively
Know more about Red litmus paper here :
https://brainly.com/question/20163204
#SPJ11
In order to inflate a car's airbag to the proper size at standard temperature and pressure, 67 L of N 2 gas are needed. How many moles of N 2 gas is this?
67 L of N2 gas at STP is equivalent to 2.67 moles of N2 ga
Steps
To calculate the number of moles of N2 gas, we can use the ideal gas law:
PV = nRT
where:
P is the pressure of the gas
V is the volume of the gas
n is the number of moles of gas
R is the universal gas constant
T is the temperature of the gas in kelvin
Assuming standard temperature and pressure (STP), the pressure is 1 atmosphere and the temperature is 273 K. The volume of gas is 67 L.
So, we have:
PV = nRT
n = (PV) / (RT)
n = (1 atm) x (67 L) / ((0.0821 L·atm/mol·K) x (273 K))
n = 2.67 mol
Therefore, 67 L of N2 gas at STP is equivalent to 2.67 moles of N2 gas.
learn more about moles here
https://brainly.com/question/15356425
#SPJ1
Why does iodine dissolve in hexane, but not in water?
Answer:
Since iodine is a non-polar ion, it will melt in a non-polar solvent like hexane. While water is a polar solvent, lodine does not react in it.
100.0 ml of a 0.565 m solution of kbr is diluted to 500.0 ml. what is the new concentration of the solution?
The solution now has a concentration of 0.113 M.
When a solution is diluted, the amount of solute remains the same, but the volume of the solution increases. Therefore, the concentration of the solution decreases.
In this case, 100.0 mL of a 0.565 M solution of KBr is diluted to a total volume of 500.0 mL. The amount of KBr in the original solution can be calculated as follows:
amount of KBr = concentration x volume = 0.565 mol/L x 0.1000 L = 0.0565 moles
When this solution is diluted to a volume of 500.0 mL, the amount of KBr remains the same:
amount of KBr = 0.0565 moles
The new concentration of the solution can be calculated using the following equation:
new concentration = amount of solute / new volume
new volume = 500.0 mL = 0.5000 L
new concentration = 0.0565 moles / 0.5000 L = 0.113 M
Therefore, the new concentration of the solution is 0.113 M.
To learn more about concentration refer to:
brainly.com/question/10725862
#SPJ4
a substance that donates one proton when dissolved in water is called ?
How many ions does CaCl2 dissociate into in water?
When CaCl₂ is dissolved in water, it dissociates into three ions: one calcium ion (Ca²⁺) and two chloride ions (2Cl⁻). The dissociation of CaCl₂ in water can be represented by the following equation: CaCl₂(s) → Ca²⁺(aq) + 2Cl⁻(aq)
When calcium chloride (CaCl₂) is dissolved in water, it dissociates into three ions - one calcium ion (Ca²⁺) and two chloride ions (2Cl⁻) due to its ionic nature. In water, the polar nature of the water molecules allows them to interact with the ionic compound, causing the ions to separate from each other and become surrounded by water molecules, forming an aqueous solution. The dissociation of CaCl₂ into Ca²⁺ and 2Cl⁻ ions increases the total number of ions in solution and therefore, the electrical conductivity of the solution. This property makes CaCl₂ a useful compound in many industrial and laboratory applications.
Learn more about CaCl₂ here: brainly.com/question/28061218
#SPJ4
experiments show that if the chemical reaction takes place at 45 c, the rate of reaction of dinitrogen pentoxide is proportional to its concentration as follows: how long will the reaction take to reduce the concentration of to 50% of its original value? select the correct answer. question 4 options: t
The long will the reaction will take to reduce the concentration of to the 50% of its original value is 1386 sec. The option A is correct.
The expression is as :
d[N₂O₅] / dt = -0.0005 [N₂O₅]
[N₂O₅] (t) = [N₂O₅] (0) . e^-0.0005t
[N₂O₅](t) = Ce^-0.0005t
The reaction concentration of to the 50% of its original value is 0.5 C
0.5 C = Ce^-0.0005t
By dividing both side by C
0.5 = e^-0.0005t
Now taking the natural logarithm on the both side, we get
ln0.5 = lne^-0.0005t
ln 0.5 = - 0.0005t
t = - 0.693 / - 0.0005
t = 1386 sec
The time taken is 1386 sec. The correct option is A.
To learn more about reaction here
https://brainly.com/question/15709670
#SPJ4
Thus question is incomplete, the complete question is :
Experiments show that if the chemical reaction N2O5→2NO2+1/2O2, takes place at 45°C, the rate of reaction of dinitrogen pentoxide is proportional to its concentration as follows: -d[N2O5]/dt = 0.0005[N2O5] How long will the reaction take to reduce the concentration of N2O5 to 50% of its original value? select the correct answer. question 4 options:
A) t = 1386 sec
B) t = 211 sec
C) t = 2345 sec
D) t = 111 sec
acetic acid and sodium hydroxide balanced equation
The balanced chemical equation of acetic acid and sodium hydroxide is given as follows:`
CH3COOH + NaOH → CH3COONa + H2O`
Here, acetic acid is CH3COOH and sodium hydroxide is NaOH.
In this reaction, acetic acid reacts with sodium hydroxide to form sodium acetate and water. Acetic acid is a weak acid, while sodium hydroxide is a strong base. When the two are mixed, they react in a neutralization reaction, where the acid and base neutralize each other's properties.
The hydrogen ion (H+) from the acid combines with the hydroxide ion (OH-) from the base to form water (H2O), and the remaining ions (CH3COO- and Na+) combine to form sodium acetate (CH3COONa). The balanced equation ensures that the number of atoms of each element is equal on both the reactant and product sides.
For more question on balanced chemical equation click on
https://brainly.com/question/23877810
#SPJ11
Help me with this is a project
The type of soap affects its cleansing ability and dishwasher soap because of the specialized formulation of dishwasher soap, which is specifically designed to remove grease and dirt from dishes.
How does the type of soap affect cleansing ability?Here is an experiment that explores the effect of the type of soap on the cleanliness of dishes:
Title: The Effect of Soap Type on Dish Cleaning Performance
Introduction: Soap is a commonly used cleaning agent for removing dirt and grease from various surfaces, including dishes. There are different types of soap available in the market, each with its unique composition and cleaning properties. In this experiment, we will investigate the effect of soap type (shampoo, hand soap, dishwasher) on dish cleaning performance.
Hypothesis: We hypothesize that the type of soap used will have a significant effect on dish cleaning performance, with dishwasher soap being the most effective due to its specialized formulation.
Materials:
Three different types of soap (shampoo, hand soap, and dishwasher soap)
Measuring cup
Three identical dirty dishes
Sink with running water
Stopwatch
Paper towel
Digital scale
Procedure:
Measure out 30 mL of each soap type into separate containers.
Weigh each of the three dirty dishes using a digital scale and record the weights.
Wet one dish in the sink and apply 10 mL of the first soap type to the dish.
Rub the dish with a paper towel for 30 seconds.
Rinse the dish with running water for 10 seconds.
Dry the dish with a paper towel and weigh it. Record the weight and note the cleanliness of the dish.
Repeat steps 3-6 with the remaining two types of soap on the other two dishes.
Repeat steps 3-7 for each soap type two more times with new dirty dishes, for a total of three trials per soap type.
Data Analysis:
Calculate the difference in weight between the dirty and cleaned dishes for each trial.
Calculate the average weight difference for each soap type.
Plot the average weight difference for each soap type on a bar graph.
Analyze the graph to determine the effect of soap type on dish cleaning performance.
Conclusion:
Based on the results of this experiment, we can conclude that the type of soap used has a significant effect on dish cleaning performance. The dishwasher soap was found to be the most effective in cleaning dishes, followed by hand soap and then shampoo.
Learn more about independent variables at: https://brainly.com/question/82796
#SPJ1
what is the solubility of strontium sulfate, srso4, in 0.36 m sodium sulfate, na2so4 solution?
The solubility of strontium sulfate, SrSO₄ in 0.36 M sodium sulfate, Na₂SO₄ solution is approximately 1.06 x 10⁻⁶ M.
What is solubility?Solubility is the maximum amount of solute that can dissolve in a solvent at a given temperature and pressure to form a saturated solution.
The solubility of strontium sulfate (SrSO₄) in a 0.36 M sodium sulfate (Na₂SO₄) solution can be calculated using the solubility product constant (Ksp) and the common ion effect. The Ksp of SrSO₄ is 3.80 x 10⁻⁷. To find the solubility of SrSO₄, we can set up an expression using the Ksp value and the concentration of Na₂SO₄:
Ksp = [Sr²⁺][SO₄²⁻]
Since Na₂SO₄ dissociates into 2 Na⁺ ions and 1 SO₄²⁻ ion, the initial concentration of SO₄²⁻ ions from Na₂SO₄ is 0.36 M. Let x be the solubility of SrSO₄, then:
3.80 x 10⁻⁷ = [x][(0.36 + x)]
As x is significantly smaller than 0.36, we can assume x is negligible in the equation:
3.80 x 10⁻⁷ ≈ [x][0.36]
Solving for x:
x ≈ 1.06 x 10⁻⁶ M
Thus, the solubility of SrSO₄ in a 0.36 M Na₂SO₄ solution is approximately 1.06 x 10⁻⁶ M.
Learn more about Solubility here: https://brainly.com/question/23946616
#SPJ11
a buffer with a ph of 4.56 contains 0.23 m of sodium benzoate and 0.10 m of benzoic acid. what is the concentration of [h3o ] in the solution after the addition of 0.060 mol hcl to a final volume of 1.7 l? assume that any contribution of hcl to the volume is negligible.
What volume will 80 g of sodium alkali occupy？
The volume that 80 g of sodium alkali will occupy depends on the specific type of sodium alkali, as each one has a different molar mass and density. To determine the volume, we would need to know the density of the sodium alkali in question.
the passage data regarding the thermal stability and enzyme activity of mkr681h is most consistent with what conclusion regarding the role of arg681 in cct?
The passage data regarding the thermal stability and the enzyme activity of the mkr681h is the most consistent with the conclusion regarding the role of Arg681 in the cct is the Arg681 is the engaged in catalytic function of enzyme.
The R681H is denotes that the amino acid 681 that is the arginine, R is the changed to the histidine (H). The Enzyme activity will depends on the principally on the enzyme’s intrinsic catalytic efficiency, and its concentration, and the initial substrate concentration, in the presence of the inhibitors or the allosteric activators, the temperature, and the pH.
This will most strongly suggests that the Arg681 will be involved in the catalytic function of normal enzyme.
To learn more about enzyme here
https://brainly.com/question/29819864
#SPJ4
calculate the moles of 1-chlorobutane used and the moles of sulfuryl chloride used and indicate which was the limiting reagent. explain how this result is consistent or inconsistent with your gc data.
Sulfuryl chloride is in excess and 1-chlorobutane is the limiting reagent. This result is consistent with the GC data.
Let's assume we used 5 grams of 1-chlorobutane and 7 grams of sulfuryl chloride. The molar mass of 1-chlorobutane is 118.5 g/mol, and the molar mass of sulfuryl chloride is 134.97 g/mol.
Moles of 1-chlorobutane used = 5 g / 118.5 g/mol = 0.042 moles
Moles of sulfuryl chloride used = 7 g / 134.97 g/mol = 0.052 moles
To determine the limiting reagent, we need to compare the moles of each reactant used to the stoichiometric coefficients in the balanced chemical equation for the reaction. The balanced chemical equation for the reaction between 1-chlorobutane and sulfuryl chloride is,
C₄H₉Cl + SO₂Cl₂ → C₄H₉SO₂Cl + HCl
The stoichiometric ratio between 1-chlorobutane and sulfuryl chloride is 1:1. Therefore, we can see that 0.042 moles of 1-chlorobutane would require 0.042 moles of sulfuryl chloride for complete reaction. However, we used 0.052 moles of sulfuryl chloride, which is greater than the amount required for complete reaction. This means that sulfuryl chloride is in excess and 1-chlorobutane is the limiting reagent.
This result is consistent with the GC data, which showed a lower yield of the product than expected. The fact that 1-chlorobutane was the limiting reagent suggests that not all of it was consumed in the reaction, which could explain the lower yield observed in the GC data.
To know more about limiting reagent, here
brainly.com/question/30723867
#SPJ4
Why does salt as a solid compound not exist in the ocean?
Salt as a solid compound does exist in the ocean, but it is not present as individual molecules. Instead, it exists as ionic compounds like sodium chloride (NaCl) and magnesium chloride (MgCl2), which are dissolved in the water as ions.
Water has the ability to dissolve ionic compounds such as salt because water molecules have polar properties.
What is saltSalt is soluble in water due to the charges of salt ions being attracted to water molecules. When salt dissolves in water, the Na+ and Cl- ions are separated from one another and dissolved by the water. This creates a homogenous mixture that we refer to as seawater or saltwater.
Ionic compounds exist in the ocean as dissolved particles. In seawater, salt concentration can range from 3.5% to 5% depending on the ocean region. The concentration of salt in the ocean is responsible for its salinity. When water evaporates from the ocean surface, the salt concentration increases, which in turn raises the salinity of the water.
Learn more about salt at
https://brainly.com/question/29349731
#SPJ11
a 0.160 mole quantity of nicl2 is added to a liter of 1.20 m nh3 solution. what is the concentration of ni2 ions at equilibrium? assume the formation constant of ni(nh3)2 6 is 5.5×108 .
The concentration of Ni2+ ions at equilibrium is approximately 4.4×10⁻⁹ M.
A more detailed explanation of the answer.
To find the concentration of Ni2+ ions at equilibrium, we need to use the formation constant (Kf) of Ni(NH3)6 2+ and perform an ICE table (Initial, Change, Equilibrium) calculation. The given Kf value is 5.5×10⁸.
Student question: What is the concentration of Ni2+ ions at equilibrium when 0.160 moles of NiCl2 are added to a liter of 1.20 M NH3 solution?
1. Balanced equation for the reaction:
Ni2+ + 6 NH3 <=> Ni(NH3)6 2+
2. Create the ICE table:
| | Ni2+ | NH3 | Ni(NH3)6 2+ |
|-----|------|-------|------------|
| I | 0.16 | 1.20 | 0 |
| C | -x | -6x | +x |
| E | 0.16-x | 1.20-6x | x |
3. Write the expression for Kf:
Kf = [Ni(NH3)6 2+]/([Ni2+][NH3]⁶) = 5.5×10⁸
4. Substitute the equilibrium values from the ICE table:
5.5×10^8 = (x)/((0.16-x)(1.20-6x)⁶)
5. Since Kf is very large, we can assume that x (change in concentration) is very small compared to the initial concentrations. Thus, we can approximate 0.16-x ≈ 0.16 and 1.20-6x ≈ 1.20.
6. Simplify and solve for x:
5.5×10⁸ = (x)/((0.16)(1.20)⁶)
x ≈ 4.4×10⁻⁹ M
The concentration of Ni2+ ions at equilibrium is approximately 4.4×10⁻⁹ M.
Learn more about constant (Kf).
brainly.com/question/30092497
#SPJ11
an unknown gas effuses through an opening at a rate 3.16 time slower than nenon gas. estimate the mola mass of this unknown gas.
The molar mass of an unknown gas that effuses through an opening at a rate of 3.16 times slower than neon gas is 199.6 g/mol.
The unknown gas effuses through an opening at a rate 3.16 times slower than neon gas. We need to estimate the molar mass of this unknown gas.
According to Graham's Law, the rate of effusion is inversely proportional to the square root of the molecular mass of the gas. The effusion rate is given for both neon and the unknown gas, thus we can say that the ratio of the effusion rates is equal to the ratio of the square roots of their molecular masses.
Let M₁ and M₂ be molar masses of the unknown gas and Neon gas respectively. Then the ratio of the effusion rates would be,
R₂/R₁ = √M₁/√M₂
Where R₁ and R₂ are the rates of effusion of the unknown gas and Neon gas respectively.
It is given that the effusion rate of the unknown gas is 3.16 times slower than that of Neon gas.
So, R₁ = 1/3.16 * R₂ or R₂ = 3.16 R₁
Putting these values in the above equation and squaring both sides, we get:
M₁/M₂ = (3.16R1/R1)²
M₁/M₂ = 9.98
M₁ = 9.98 × M₂
Now, the molar mass of Neon is 20g/mol (Neon is monoatomic and its atomic mass is 20).
We can substitute this value to find out the molar mass of the unknown gas.
M₁ = 9.98 × 20
M₁ = 199.6 g/mol
Hence, the estimated molar mass of the unknown gas is 199.6 g/mol.
To know more about molar mass, refer here:
https://brainly.com/question/14268211#
#SPJ11
based on the molar mass of anhydrous salt given to you by the teacher, calculate the moles of anhydrous salt. determine the smallest whole number ratio of moles of water to moles of anydrous salt.
To calculate the moles of anhydrous salt, divide the molar mass by the molar mass of the anhydrous salt.
The molar mass of an anhydrous salt is the sum of the molar mass of each of its components.
For example, if the molar mass of an anhydrous salt is 78.0 g/mol, then 78.0 g/mol/58.44 g/mol = 1.33 moles of anhydrous salt.To determine the smallest whole number ratio of moles of water to moles of anhydrous salt, divide the number of moles of water by the number of moles of anhydrous salt.
For example, if there are 2 moles of water and 1.33 moles of anhydrous salt, then the ratio of moles of water to moles of anhydrous salt is 2:1.33, which can be simplified to 2:1.Learn more about moles - brainly.com/question/24748125
#SPJ11
PLEASE HELP ME ITS DUE IN A COUPLE OF HOURS
write the autoionization reaction for acetic acid, ch3cooh.
The autoionization reaction for acetic acid (CH₃COOH), is CH₃COOH + H₂O → CH₃COO- + H₃O+.
Acetic acid is also known as ethanoic acid. The first part of the equation, CH₃COOH, represents the acetic acid molecule with one hydrogen atom attached to each of the three oxygen atoms. The second part of the equation, H₂O, represents water.
When acetic acid reacts with water, a hydrogen proton (H+) is released, which is denoted by the H₃O+ on the right side of the equation. The H+ ion binds to the oxygen atoms of the acetic acid, forming a negatively-charged acetate ion, CH₃COO-. This is what is referred to as the autoionization of acetic acid.
The autoionization reaction is important in aqueous solutions of acetic acid because it affects the pH of the solution. Acetic acid is a weak acid, meaning that it does not completely dissociate in water. When it autoionizes, a small percentage of the acetic acid molecules react with the water, increasing the concentration of H+ ions and decreasing the pH of the solution.
As a result, aqueous solutions of acetic acid have pH values lower than 7, typically between 4 and 5.
To know more about acetic acid refer here:
https://brainly.com/question/16970860#
#SPJ11
what is the percent yield if this reaction produced 55.0 g of ethene from 100.0 g of ethanol?
The percent yield of a reaction is calculated by taking the amount of product produced and dividing it by the amount of reactant used, and then multiplying by 100 to get a percentage.
In this case, 55.0 g of ethene was produced from 100.0 g of ethanol, so the percent yield is 55.0 g divided by 100.0 g, multiplied by 100, which gives a percent yield of 55%.
This percent yield indicates the efficiency of the reaction, as the higher the percent yield, the more efficient the reaction is. A percent yield of 55% means that the reaction was relatively efficient, as the large majority of the reactant was converted into product. If the percent yield was much lower than this, it could indicate that there were some issues with the reaction and that it was not as efficient as it could be.
Know more about ethanol here
https://brainly.com/question/25002448#
#SPJ11
in your experiment, sodium bisulfite (nahso3) in water is used to destroy any unreacted bromine (br2) or to trap the br2 and not allow it to escape from the reaction setup. the reaction is shown below but can't be described using conventional organic curved-arrow pushing. after adding sodium bisulfite in your procedure, why is the resulting mixture put into acid waste?
In the experiment, sodium bisulfite (NaHSO3) in water is used to destroy any unreacted bromine (Br2) or to trap the Br2 and not allow it to escape from the reaction setup. The reaction is shown below but cannot be described using conventional organic curved-arrow pushing.
The resulting mixture is placed in acid waste for the following reasons:
Sodium bisulfite's addition to the reaction mix in the procedure is done to destroy any unreacted bromine (Br2) or to trap the Br2 and prevent it from escaping the reaction setup. Following the reaction, it is necessary to neutralize the mixture with sodium carbonate or another base. After that, the neutralized mixture should be properly disposed of in an acid waste container. Thus, the resulting mixture is placed in acid waste.
Sodium bisulfite is used in excess to the amount of bromine to ensure that all of the bromine is captured or reacted. The resulting mixture is extremely acidic as a result of the reaction. As a result, the mixture must be neutralized before being disposed of.
The most straightforward approach to neutralizing it is to add a basic substance like sodium carbonate, which reacts with the acidic mixture to create water and sodium sulfate (Na2SO4).
As a result, when sodium bisulfite is added in the procedure, the resulting mixture is put into acid waste.
To know more about "Sodium bisulfite" refer here:
https://brainly.com/question/14653628#
#SPJ11
The correct reaction showing how FeCO3 has increased solubility when forming the complex ion Fe(CN)64- is ____ A) FeCO3 (aq) + 6 CN- (aq) <-> Fe(CN).- (aq) + CO32- (aq) B) FeCO3 (s) + 6 CN- (aq) <-> Fe(CN)64- (aq) + CO32- (aq) C) Fe2+ (aq) + 6 CN- (aq) <-> Fe(CN)64- (aq) D) FeCO3 (s) = Fe2+ (aq) + CO32- (aq)
In this case, the correct reaction showing how FeCO3 has increased solubility when forming the complex ion Fe(CN)64- is B) FeCO3 (s) + 6 CN- (aq) <-> Fe(CN)64- (aq) + CO32- (aq). So, the correct option is B.
This reaction shows that when FeCO3 is combined with six CN- ions, it forms the complex ion Fe(CN)64-, which is soluble in water. This increases the solubility of FeCO3. The reaction also produces CO32-, which is also soluble in water. There is no increased solubility in FeCO3 when forming the complex ion Fe(CN)64- in all other options. Therefore, the correct answer is option B.
You can learn more about complex ions at: brainly.com/question/31059600
#SPJ11
an atom of which element would have no unpaired electrons in its ground state? group of answer choices li c o be b
The element which would have no unpaired electrons in its ground state is beryllium.
The ground state refers to the lowest energy level in which an electron can exist in an atom. An electron in the ground state has no excess energy, therefore it is stable and unlikely to be disrupted by an external force. The energy of the ground state is defined as zero, and all other states have greater energy than it.
The electronic configuration of Be is [tex]1s^2 2s^2[/tex]. In the ground state, both of the 2s electrons in beryllium are paired, so there are no unpaired electrons.
The number of unpaired electrons in the other elements listed is:
Li: one unpaired electron in the 2s orbital
C: two unpaired electrons in the 2p orbitals
O: two unpaired electrons in the 2p orbitals
B: one unpaired electron in the 2p orbital
The element that would have no unpaired electrons in its ground state is Be (beryllium).
To learn more about electronic configuration refer to: https://brainly.com/question/29757010
#SPJ11
rank the following alkyl halides in order of increasing reactivity in an E2 reaction. Be sure to answer all parts
(CH3)2C(Br)CH2CH2CH3 (CH3)2CHCH2CH(Br)CH3 (CH3)2CHCH2CH2CH2Br
lowest reactivity: ?
Intermediate reactivity: ?
Highest reactivity: ?
The order of increasing reactivity of the following alkyl halides in an E2 reaction is (CH3)2C(Br)CH2CH2CH3 < Intermediate reactivity, (CH3)2CHCH2CH(Br)CH3 < Highest reactivity, (CH3)2CHCH2CH2CH2Br < Lowest reactivity.
In an E2 reaction, the rate of reaction is affected by the size and the polarizability of the leaving group, the bulkiness of the alkyl groups, and the steric hindrance. In this case, the size and polarizability of the leaving group increases from (CH3)2C(Br)CH2CH2CH3 < (CH3)2CHCH2CH(Br)CH3 < (CH3)2CHCH2CH2CH2Br, making the reactivity increase in the same order.
The bulkiness of the alkyl groups has the opposite effect; the bulkier the alkyl groups, the lower the reactivity of the alkyl halide. The alkyl groups in the compounds are in the order (CH3)2C(Br)CH2CH2CH3 < (CH3)2CHCH2CH2CH2Br < (CH3)2CHCH2CH(Br)CH3, making the reactivity increase in the reverse order.
Lastly, steric hindrance affects the rate of reaction as well. The steric hindrance decreases from (CH3)2C(Br)CH2CH2CH3 < (CH3)2CHCH2CH(Br)CH3 < (CH3)2CHCH2CH2CH2Br, leading to the highest reactivity of (CH3)2CHCH2CH(Br)CH3.
Overall, this leads to the order of reactivity (CH3)2C(Br)CH2CH2CH3 < Intermediate reactivity, (CH3)2CHCH2CH(Br)CH3 < Highest reactivity, (CH3)2CHCH2CH2CH2Br < Lowest reactivity.
To know more about alkyl halides refer here:
https://brainly.com/question/28384269#
#SPJ11
Complete Question:
rank the following alkyl halides in order of increasing reactivity in an E2 reaction. Be sure to answer all parts
1. (CH3)2C(Br)CH2CH2CH3
2. (CH3)2CHCH2CH(Br)CH3
3. (CH3)2CHCH2CH2CH2Br
lowest reactivity: ?
Intermediate reactivity: ?
Highest reactivity: ?
how many grams are there in a sample of calcium containing 2.71 x 10^20 particles?
The calcium sample, which contains 2.71 x 1020 particles, thus, has a mass of 0.0181 grammes.
What weight of g is contained in a sample containing 4.52 moles of CaCO3?4.52 moles of caco3 are present. For c, a c o 3, the molar mass is 100 grammes per mole. As a result, the mass of c c 3 is equal to moles times molar mass, or 4.52 moles times 100 grammes per mole, which is 452 grammes.
We may use the techniques below to determine the mass of a sample of calcium that contains 2.71 x 1020 particles:
Calculate the number of moles of calcium:
Number of moles = Number of particles / Avogadro's number
= 2.71 x 10²⁰ / 6.022 x 10²³
= 0.000450 mol
Calculate the mass of calcium in grams:
Mass (g) = Number of moles x Atomic mass (g/mol)
= 0.000450 mol x 40.08 g/mol (atomic mass of calcium)
= 0.0181 g
To know more about calcium visit:-
https://brainly.com/question/8768657
#SPJ1
PLEASE HELP
what is civic engagement in 150 words and what are your tips on water scarcity
The term "civic engagement" describes people actively participating in their communities and society as a whole. The lack of water scarcity in many areas of the world is a serious problem brought on by causes including population increase, climate change, and pollution.
What do you mean by a lack of water?In response to changing supply and demand throughout time, water availability varies. As demand rises and/or the amount or quality of the water supply declines, there is an increase in water scarcity.
Why should we manage the water shortage?When there is a water shortage, the primary issue is that people cannot get fresh, clean drinking water. The human body can only exist for a very short time without water, and not drinking other issues with water are covered in the section below.
To know more about climate change visit:-
https://brainly.com/question/28257810
#SPJ1
Question:
What is civic engagement in 150 words?
What are your tips on water scarcity?
what volume in ml of concentrated sulfuric acid (18.0)m h2so4) is needed to prepare 9.0l of a 1.00m solution?
You need 163.8 mL of concentrated sulfuric acid (18M) to prepare 9.0 L of a 1.00M solution.
The given problem can be solved using the molarity equation which is:
Molarity (M) = moles of solute (n) / liters of solution (L)
The balanced chemical equation for sulfuric acid (H2SO4) is:H2SO4 → 2H+ + SO42
The molecular weight of H2SO4 is 98g/mol.
Hence, 18M H2SO4 solution contains 98g/Liter.98g / 18M = 5.44 g/mL5.44 g/mL x 1000 mL/L = 5440 g/L5440 g / 98 g/mol = 55.102M
Concentrated sulfuric acid is 18M.
So, the volume of concentrated sulfuric acid (18M H2SO4) that is needed to prepare 9.0 L of 1.00M solution can be determined as follows:
Number of moles of H2SO4 in 9.0 L of 1.00M H2SO4 solution = 1.0 mol/L × 9.0 L = 9.0 mol
Total number of moles of H2SO4 in the final solution (1.00M) can be calculated as:9.0 mol / 55.102 mol/L = 0.1638 L = 163.8 mL (rounded to 2 decimal places)Therefore,
To know more about "Sulfuric acid" refer here:
https://brainly.com/question/1107054#
#SPJ11