Answer:
2 AgNO3 + Na2SO4 → Ag2SO4 + 2 NaNO3
Explanation:
The general schemefor a reaction is given as;
Reactants --> Products
In this question, the reactants are AgNO3 and Na2SO4. The product is Ag2SO4.
The equation is given as;
AgNO3 + Na2SO4 --> Ag2SO4
The other poduct formed in this reaction is NaNO3.
The full reaction is given as;
AgNO3 + Na2SO4 --> Ag2SO4 + NaNO3
The above reaction is not balanced because there are unequal number of atoms of the elements on both sides of the reaction.
The balanced equation is given as;
2 AgNO3 + Na2SO4 → Ag2SO4 + 2 NaNO3
In this equation, there are equal number of moles of the atoms on both sides.
Balance this equation: __ UO2(s) + __ HF(ℓ) → __ UF4(s) + __ H2O(ℓ) Though you would not normally do so, enter the coefficient of "1" if needed. UO2(s) HF(ℓ) UF4(s) H2O(ℓ)
Answer:
The balanced equation is given below:
UO2(s) + 4HF(l) —› UF4(s) + 2H2O(l)
The coefficients are: 1, 4, 1, 2
Explanation:
UO2(s) + HF(l) —› UF4(s) + H2O(l)
The above equation can be balance as follow:
There are 2 atoms of O on the left side and 1 atom on the right side. It can be balanced by writing 2 in front of H2O as shown below:
UO2(s) + HF(l) —› UF4(s) + 2H2O(l)
There are 4 atoms of F on the right side and 1 atom on the left side. It can be balanced by writing 4 in front of HF as shown below:
UO2(s) + 4HF(l) —› UF4(s) + 2H2O(l)
Now, the equation is balanced.
The coefficients are: 1, 4, 1, 2.
An atom with 19 protons and 18 neutrons is a(n)
A. Isotope of potassium(K)
B. Standard atom of argon(Ar)
C. Standard atom of (K)
D. Isotope of argon (Ar)
Answer:
A
Explanation:
The number of protons indicates the element so we know it's potassium. To get the number of neutrons you subtract the number of protons (19) from the mass number which for potassium is 39.
39-19=20 neutrons
Because you have 18 neutrons then yours would be an isotope.
Answer: A. Isotope of potassium(K)
Explanation: Founders Educere answer.
2
22. A sodium chloride solution is 15.0% m/m%. Calculate mass of sodium chloride in 219 g solution.
14.2g
80.38
11.2 g
32.9 g
Answer: The mass of sodium chloride in 219 g solution is 32.9 g
Explanation:
To calculate the mass percent of element in a given compound, we use the formula:
[tex]\text{Mass percent of A}=\frac{\text{Mass of A}}{\text{mass of A +mass of B}}\times 100[/tex]
To find mass of sodium chloride in solution:
[tex]\text{Mass percent of sodium chloride}=\frac{\text{Mass of sodium chloride}}{\text{mass of solution}}\times 100[/tex]
Mass percent of sodium chloride= 15.0 %
Mass of solution = 219g
[tex]15=\frac{\text{Mass of sodium chloride}}{219}\times 100[/tex]
[tex]{\text{Mass of sodium chloride}=32.9g[/tex]
Thus mass of sodium chloride in 219 g solution is 32.9 g
A reaction has the rate law, rate = k[A]3[B]. Which change will cause the greatest increase in the reaction rate?
Answer:
Increasing the concentration of A will cause the greatest change over the rate.
Explanation:
Hello,
In this case, considering the given rate law, which is third-order with respect to A, changing its concentration, the rate will be significantly modified. For instance, suppose a concentration of A and B of 1M and a symbolic rate constant (k), this causes the rate to be:
[tex]r=k[1M]^3[1M]=1k\frac{M^4}{s}[/tex]
Then, if we change the concentration of A to 2 M holding the concentration of B in 1 M, the new rate constant will be:
[tex]r=k[2M]^3[1M]=8k\frac{M^4}{s}[/tex]
Nevertheless, if we hold the concentration of A in 1 M and the concentration of B is now 2 M (same change), the new rate constant is:
[tex]r=k[1M]^3[2M]=2k\frac{M^4}{s}[/tex]
It means that increasing the concentration of A will cause the greatest change over the rate.
Best regards.
The change in concentration of A will cause the greatest increase in the reaction rate.
Rate of reaction :Given reaction has rate law ,
[tex]rate=k[A]^{3} [B][/tex]
which is third-order with respect to concentration of A
From rate law equation, It is observed that the degree of concentration of A is three.
It means that small change in concentration of A result large change in rate of reaction.Thus, the change in concentration of A will cause the greatest increase in the reaction rate.Learn more about the rate of reaction here :
https://brainly.com/question/23637409
Convert the following measurement
Answer:
6.9 Kg/mol•dL
Explanation:
To convert 6.9×10⁴ g/mol•L to kg/mol•dL,
First, we shall convert to kg/mol•L.
This can be achieved by doing the following:
Recall: 1 g = 1×10¯³ Kg
1 g/mol•L = 1×10¯³ Kg/mol•L.
Therefore,
6.9×10⁴ g/mol•L = 6.9×10⁴× 1×10¯³
6.9×10⁴ g/mol•L = 69 Kg/mol•L
Finally, we shall convert 69 Kg/mol•L to Kg/mol•dL.
This is illustrated below:
Recall: 1 L = 10 dL
1 Kg/mol•L = 1×10¯¹ Kg/mol•dL
Therefore,
69 Kg/mol•L = 69 × 1×10¯¹
69 Kg/mol•L = 6.9 Kg/mol•dL
Therefore, 6.9×10⁴ g/mol•L is equivalent to 6.9 Kg/mol•dL.
A gas of unknown identity diffuses at a rate of 155 mL/s in a diffusion apparatus in which carbon dioxide diffuses at the rate of 102 mL/s. Calculate the molecular mass of the unknown gas.
Answer:
19.07 g mol^-1
Explanation:
The computation of the molecular mass of the unknown gas is shown below:
As we know that
[tex]\frac{Diffusion\ rate\ of unknown\ gas }{CO_{2}\ diffusion\ rate} = \frac{\sqrt{CO_{2\ molar\ mass}} }{\sqrt{Unknown\ gas\ molercular\ mass } }[/tex]
where,
Diffusion rate of unknown gas = 155 mL/s
CO_2 diffusion rate = 102 mL/s
CO_2 molar mass = 44 g mol^-1
Unknown gas molercualr mass = M_unknown
Now placing these values to the above formula
[tex]\frac{155mL/s}{102mL/s} = \frac{\sqrt{44 g mol^{-1}} }{\sqrt{M_{unknown}} } \\\\ 1.519 = \frac{\sqrt{44 g mol^{-1}} }{\sqrt{M_{unknown}} } \\\\ {\sqrt{M_{unknown}} } = \frac{\sqrt{44 g mol^{-1}}}{1.519} \\\\ {\sqrt{M_{unknown}} } = \frac{44 g mol^{-1}}{(1.519)^{2}}[/tex]
After solving this, the molecular mass of the unknown gas is
= 19.07 g mol^-1
An amphoteric salt is one that contains an anion that can act as either an acid or a base in water. Baking soda, NaHCO3, is an example. By combining the ionization and hydrolysis reactions of the anion, you get the principle reaction that occurs when this salt is dissolved in water.
2HCO3-(aq) CO32-(aq) + H2CO3(aq)
The pH for such, a solution is given by
pH = pKa1 + pKa2/2
where Ka1 and Ka2 are the ionization constants of the acid (in this case, H2CO3). Note that the pH of the solution is independent of the salt concentration. Calculate the pH of a NaHCO3 solution.
Answer:
pH = 8.34
Explanation:
The equilbriums of the amphoteric HCO₃⁻ (Ion of NaHCO₃) are:
H₂CO₃ ⇄ HCO₃⁻ + H⁺ Ka1 -Here, HCO₃⁻ is acting as a base-
HCO₃⁻⇄ CO₃²⁻ + H⁺ Ka2 -Here, is acting as an acid-
Where Ka1 = 4.3x10⁻⁷ and Ka2 = 4.8x10⁻¹¹. As pKa = -log Ka:
pKa1 = 6.37; pKa2 = 10.32
As the pH of amphoteric salts is:
pH = (pKa1 + pKa2) / 2
pH = 8.34write the IUPAC name OF THE FOLLOWING COMPOUNDS
Answer:
Explanation:
a) 2 chloro butane
b) 2-3 dimethyl butane
c) 2 bromo 3 nitro pentane
d) 2-3 trimethyl pentane
e) 2-bromo,3-methyl,4-nitro hexane
f) 2-methyl cyclo butane
A student mixes wants to prepare 24.1 mmol of benzamide from benzoyl chloride and NH4OH. If the student uses excess 15 M NH4OH, how many mL of Benzoyl chloride must be used
Answer:
2.81mL
Explanation:
Based on the reaction:
C₆H₃COCl + 2NH₃ → C₆H₅CONH₂ + NH₄Cl
Benzoyl chloride + ammonia → Benzamide
1 mole of benzoyl chloride in excess of ammonia produce 1 mole of Benzamide.
Thus, assuming a theoretical yield, to produce 24.1mmoles of benzamide you require 24.1mmoles of benzoyl chloride.
As molar mass of benzoyl chloride is 141g/mol, mg you require are:
mg Benzoyl chloride: 24.1mmol × (141mg / 1mmol) = 3398.1mg = 3.3981g of benzoyl chloride.
to convert this mass to mL, you require density of Benzoyl chloride (1.21g/mL). Thus, mL you need are:
3.3981g × (1mL / 1.21g) =
2.81mLA student obtained a clean flask. She weighed the flask and stopper on an analytical balance and found the total mass to be 34.232 g. She then filled the flask with water and found the new mass to be 60.167 g. The temperature of the water was measured to be
Answer:
25.99mL is the volume internal volume of the flask
Explanation:
To complete the question:
The temperature of the water was measured to be 21ºC. Use this data to find the internal volume of the stoppered flask
The flask was filled with water, that means the internal volume of the flask is equal to the volume that the water occupies.
To find the volume of the water you need to find the mass and by the use of density of water at 21ºC (0.997992g/mL), you can find the volume of the flask, thus:
Mass water = Mass filled flask - Mass of clean flask
Mass water = 60.167g - 34.232g
Mass water = 25.935g of water.
To convert this mass to volume:
25.935g × (1mL / 0.997992g) =
25.99mL is the volume internal volume of the flaskg Increasing the number of unsaturations in a fatty acid ____________ the melting temperature of the fatty acid.
Answer:
Decreases
Explanation:
Fatty acid which have the double bond or triple bond are called unsaturated fatty acids. Because of the double or triple bond, unsaturated fatty acids are loosely packed and form some distance among molecules which lowers the melting point of unsaturated fatty acids.
So, if the unsaturation of fatty acid will increase, it leads to more branched and loosely packed molecules and decreases the melting temperature accordingly.
Charcoal from the dwelling level of the Lascaux Cave in France gives an average count of 0.97 disintegrations of ^14 C per minute per gram of sample. Living wood gives 6.68 disintegrations per minute per gram. Estimate the date of occupation and hence the probable date of the wall painting in the Lascaux Cave. Hint: Disintegrations per minute per gram" has the same units as the time-derivative of concentration for a radioactive decay model. (You may use the fact that the half-life of ^14C is 5568 years.)
Answer:
Explanation:
count given by old sample = .97 disintegrations per minute per gram
count given by fresh sample = 6.68 disintegrations per minute per gram
Half life of radioactive carbon = 5568 years
rate of disintegration
dN / dt = λ N
In other words rate of disintegration is proportional to no of radioactive atoms present . As number reduces rate also reduces .
Let initial no of radioactive be N₀ and after time t , number reduces to N
N₀ / N = 6.68 / .97
Now
[tex]N=N_0e^{-\lambda t}[/tex]
[tex]\frac{N}{N_0} =e^{-\lambda t}[/tex]
[tex]\frac{6.68}{.97} = e^{\lambda t}[/tex]
λ is disintegration constant
λ = .693 / half life
= .693 / 5568
= .00012446 year⁻¹
Putting the values in the equation above
[tex]\frac{6.68}{.97} = e^{.00012446\times t}[/tex]
[tex]6.8866 = e^{.00012446\times t}[/tex]
1.929577 = .00012446 t
t = 15503.6 years .
A calibration curve constructed from absorbance values of solutions containing a known concentration of permanganate ions has the following best-fit line:
y = (3.62× 10^3 L/mol) x
where y is the absorbance of the solution at 525 nm and x is the concentration of MnO4- (aq) in mol/L. The path length of the cuvettes used in the experiment is 1 cm. Based on this information, what is the molar absorptivity of MnO4- (aq) at 525 nm?
Answer:
3.62×10³ L/mol
Explanation:
Beer-Lambert law relates the absorbance of a sample and its concentration. Its formula is:
A = ε×C×l
Where A is absorbance of the sample, ε is molar absorptivity (A constant f each sample), C its concentration and l is path length
Now, the formula obtained was:
y = (3.62×10³ L/mol) x
Where Y ia absorbance = A, x its concentration = C and 1cm is path length.
You can write:
A = (3.62×10³ L/mol)×C×l
That means, molar absorptivity of your sample under the meaured conditions is:
3.62×10³ L/mol
Identify the elements that have the following abbreviated electron configurations.
A) [Ne] 3s23p5.
B) [Ar] 4s23d7.
C) [Xe] 6s1.
Answer:
A) Chlorine (Cl)
B) Cobalt (Co)
C) Caesium (Cs)
Hope this helps.
The abbreviated electron configurations that was given in the question belongs to
Chlorine (Cl)
Cobalt (Co)
Caesium (Cs) respectively.
Electronic configurations can be regarded as the electronic structure, which is the way an electrons is arranged in energy levels towards an atomic nucleus.The electron configurations is very useful when describing the orbitals of an atom in its ground state.To calculate an electron configuration, we can put the periodic table into sections, and this section will represent the atomic orbitals which is the regions that house the electrons. Groups one of the period table and two belongs to s-block, group 3 through 12 belongs to the d-block, while 13 to 18 can be attributed to p-block ,The rows that is found at bottom are the f-blockTherefore, electron configurations explain orbitals of an atom when it is in it's ground state.
Learn more at:https://brainly.com/question/21940070?referrer=searchResults
How many molecules of CaCl2 are equivalent to 75.9g CaCl2 (Ca=40.08g/mol, CL=35.45g/mol)
Answer:
[tex]\large \boxed{4.12 \times 10^{23}\text{ formula unis of CaCl}_{2}}$}[/tex]
Explanation:
You must calculate the moles of CaCl₂, then convert to formula units of CaCl₂.
1. Molar mass of CaCl₂
CaCl₂ = 40.08 + 2×35.45 = 40.08 + 70.90 = 110.98 g/mol
2. Moles of CaCl₂ [tex]\text{Moles of CaCl}_{2} = \text{75.9 g CaCl}_{2} \times \dfrac{\text{1 mol CaCl}_{2}}{\text{110.98 g CaCl}_{2}} = \text{0.6839 mol CaCl}_{2}[/tex]
3. Formula units of CaCl₂
[tex]\text{No. of formula units} = \text{0.6839 mol CaCl}_{2} \times \dfrac{6.022 \times 10^{23}\text{ molecules CaCl}_{2}}{\text{1 mol P$_{2}$O}_{5}}\\\\= \mathbf{4.12 \times 10^{23}}\textbf{ formula units CaCl}_{2}\\\text{There are $\large \boxed{\mathbf{4.12 \times 10^{23}}\textbf{ formula units of CaCl}_{2}}$}[/tex]
Select the correct answer from each drop-down menu.
Pictures that we receive from space are of the
✓ because it takes time for
to reach Earth.
Answer:
Pictures that we receive from space are of the past because it takes time for light to reach Earth.
Explanation:
For example, Mars is so far away that, depending on its position in orbit, a picture from Mars takes between 4 min and 24 min to reach Earth.
Answer: Pictures that we receive from space are of the
past
because it takes time for
light
to reach Earth.
Explanation:
How long should you hold the iron on the hair to heat the strand and set the base ?
A) 5 seconds
B) 15 seconds
C) 30 seconds
D) 1 minute
Which Carbon is the triple bound attached to in 6-ethyl-2-octyne?
-first
-fourth
-third
-second
Answer:
-second
Explanation:
6-ethyl-2-octyne is an unsaturated compound with a triple bond.
6-ethyl-2-octyne will have a triple bound attached to the second carbon. The suffix -yne suggests that compound carry a triple bond and the number "2" before suffix refers to the position of triple bond that is second carbon.
Hence, the correct option is "-second ".
A glass cylinder contains 2 gases at a pressure of 106 kPa. If one gas is at 7 kPa, what is the pressure of attributed to the other gas? a) 9 kPa b) 99 kPa c) 113 kPa d) 7 kPa e) 2 kPa (URGENT)
Answer:
b) 99 kPa
Explanation:
According to Daltons law of partial pressure, the total pressure of a mixture of two or more non reactive gases is the sum of their individual pressures. Let the total pressure of a mixture of n number of gases be [tex]P_{total}[/tex] and their individual pressure be [tex]P_1,P_2,P_3,\ .\ .\ .\ ,\ P_n[/tex], According to Daltons partial pressure law:
[tex]P_{total}=P_1+P_2+P_3+.\ .\ .+P_n[/tex]
Since A glass cylinder contains 2 gases at a pressure of 106 kPa, therefore n = 2. Also one gas ([tex]P_1[/tex]) is at 7 kPa. Using Daltons partial pressure law:
[tex]P_{total}=P_1+P_2+P_3+.\ .\ .+P_n\\P_{total}=P_1+P_2\\106\ kPa=7\ kPa+P_2\\P_2=106\ kPa-7\ kPa\\P_2=99\ kPa[/tex]
g For the following reaction, 20.9 grams of iron are allowed to react with 9.19 grams of oxygen gas . iron(s) oxygen(g) iron(II) oxide(s) What is the maximum mass of iron(II) oxide that can be formed
Answer:
26.87g
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2Fe + O2 —> 2FeO
Next, we shall determine the masses of Fe and O2 that reacted and the mass of FeO produced from the balanced equation.
This is illustrated below:
Molar mass of Fe =56 g/mol
Mass of Fe from the balanced equation = 2 x 56 = 112 g
Molar mass of O2 = 16x2 = 32 g/mol
Mass of O2 from the balanced equation = 1 x 32 = 32 g
Molar mass of FeO = 56 + 16 =72 g/mol
Mass of FeO from the balanced equation = 2 x 72 = 144 g
From the balanced equation above,
112 g of Fe reacted with 32 g of O2 to produce 144 g of FeO.
Next, we shall determine the limiting reactant.
This is illustrated below:
From the balanced equation above,
112 g of Fe reacted with 32 g of O2.
Therefore, 20.9 g of Fe will react with = (20.9 x 32)/112 = 5.97 g of O2.
From the calculations made above, we can see that only 5.97 g out of 9.19 g of O2 given were required to react completely with 20.9 g of Fe.
Therefore, Fe is the limiting reactant and O2 is the excess reactant.
Finally, we shall determine the mass of FeO produced from the reaction.
In this case, the limiting reactant will be used, as it will give the maximum yield of the reaction since all of it is used up in the reaction.
The limiting reactant is Fe and the maximum mass of FeO produced can be obtained as follow:
From the balanced equation above,
112 g of Fe reacted to produce 144 g of FeO.
Therefore, 20.9 g of Fe will react to produce = (20.9 x 144)/112 = 26.87g of FeO.
Therefore, the maximum mass of iron(II) oxide, FeO produced is 26.87g.
3. There are many different primary standards that could be used in a standardization titration. What are the criteria for a primary standard
Answer:
High purity.
Stability (low reactivity)
Low hygroscopicity (to minimize weight changes due to humidity)
Explanation:
There are different primary standards that could be used in a standardization titration in order to achieve the best and accurate result possible. These standards include high purity,stability and low hygoscropicity .
A high purity means the reactants lack impurities which could affect the result. Stability also ensures that there is non reactivity with elements/compounds in the atmosphere while low hygroscopicity ensures weight changes are minimized due to humidity.
Determine the volume occupied by 10 mol of helium at 27 ° C and 82 atm
please.
Answer:
3.00 L
Explanation:
Convert the pressure to Pascals.
P = 82 atm × (101325 Pa/atm)
P = 8,308,650 Pa
Convert temperature to Kelvins.
T = 27°C + 273
T = 300 K
Use ideal gas law:
PV = nRT
(8,308,650 Pa) V = (10 mol) (8.314 J/mol/K) (300 K)
V = 0.00300 m³
If desired, convert to liters.
V = (0.00300 m³) (1000 L/m³)
V = 3.00 L
Answer:
[tex]\large \boxed{\text{3.0 L}}[/tex]
Explanation:
[tex]\begin{array}{rcl}pV &=& nRT\\\text{82 atm} \times V & = & \text{10 mol} \times \text{0.082 06 L}\cdot\text{atm}\cdot\text{K}^{-1}\text{mol}^{-1} \times \text{300.15 K}\\82V & = & \text{246 L}\\V & = & \textbf{3.0 L} \\\end{array}\\\text{The volume of the balloon is $\large \boxed{\textbf{3.0 L}}$}[/tex]
g Air contains nitrogen, oxygen, argon, and trace gases. If the partial pressure of nitrogen is 592 mm Hg, oxygen is 160 mm Hg, argon is 7 mm Hg, and trace gas is 1 mm Hg, what is the atmospheric pressure
Answer:
Explanation:
Atmospheric pressure = partial pressure of nitrogen + partial pressure of oxygen + partial pressure of argon + partial pressure of trace element
putting the given values
Atmospheric pressure = 592 + 160 + 7 + 1
= 760 mm of Hg .
Identify the energy transformations in the following actions.
a. Turning on a space heater
b. Dropping an apple core into the garbage
c. Climbing up a rope ladder
d. Starting a car
e. Turning on a flashlight
Think about each action as a before and after. For instance, before the space heater is turned on, what kind of energy is there? After the space heater is turned on, what happens? This change from before to after will help you identify the two types of energy involved.
Identify five more types of energy transformations that you see at home, at school, or outdoors. Make sure to name the action, such as turning on a light, as well as the two types of energy involved. Remember, for energy to be transformed, the type of energy before and after a task must be different.
Answer:
to. Turn on a heater (electrical energy that is transformed into heat energy)
yes. Throwing an apple core in the trash (chemical energy that is transformed into nutritional energy for decomposers)
C. Climbing a rope ladder (chemical energy from our food into mechanical energy that allows us to climb the ladder)
re. Starting a car (electrochemical energy in mechanical energy)
me. Turning on a flashlight (chemical energy from the battery into light energy)
Five daily actions that exemplify the transformation of energy:
Do physical activity (change of metabolic energy in mechanics)
Turn on a heater (electrical energy that is transformed into heat energy)
Lighting a stove (Chemical energy product of combustion that results in the transformation of that energy into heat)
Turn on a cell phone (chemical energy characteristic of the battery that is transformed into sound and light energy)
Riding a bicycle (nutritional energy or energy of the metabolism that is transformed into mechanical energy)
Explanation:
The energy is never lost, it is always transformed.
It is one of the great principles of physics and is the reason why the universe is infinite.
BEARINGS
Question 12 (SSCE 1994 May/June)
(a) A village P is 10km from a lorry station, Q, on
a bearing 065º. Another village R, is 8km from
Q on a bearing 155º. Calculate
(i) the distance of R from P to the nearest
kilometer
(ii) the bearing of R from P to the nearest degree
(b) M is a village on PR such that QM is
perpendicular to PR. Find the distance of M
from P to the nearest kilometer.
Answer:
a. (i) the distance of R from P is 13 Km to the nearest kilometer
(ii) the bearing of R from P = 360 - (38 + 25) = 297° to the nearest degree
b. the distance of m from P is 11 Km to the nearest kilometre
Explanation:
a) A triangle PQR is formed. Q = 90°, p = 8 km; r = 10 km; distance of R from P is q is to be found.
(i) Using the cosine rule: q² = p² + r² - 2prCosQ
q² = 8² + 10² - 2 * 8 * 10 * Cos90
q² = 64 + 100 + 0
q² = 164
q = 13 Km to the nearest kilometre
Therefore, the distance of R from P is 13 Km to the nearest kilometer
(ii) the bearing of R from P
The angle at P is found using the formula Cos P = (q² + r² - p²)/2qr
Cos P = 13² + 10² - 8²/2 * 13 *10
Cos P = 0.7884
P = Cos⁻¹ 0.7884
P = 38°
Therefore, the bearing of R from P = 360 - (38 + 25) = 297° to the nearest degree
Note : 25° is alternate (Northwest) to 65°at P
b) A right-angled triangle QMP is formed
using the trigonometrical ratios; cos Θ = adjacent/hypotenuse
where the hypotenuse side = 10 km, adjacent side = distance of M from P, x
cos P = x/10
x = cos 38 * 10
x = 11 Km to the nearest kilometre
Therefore, the distance of m from P is 11 Km to the nearest kilometre
Generally, systems move spontaneously in the direction of increasing entropy. TRUE FALSE
Answer:
true
Explanation:
Which is one characteristic of producers?
They recycle nutrients.
They do not eat other organisms.
They break down waste for energy.
They use other organisms for energy.
Answer: They use other organisms for energy
Explanation:
Answer:
they use other organisms for energy
Explanation: d
Calculate the molality of a solution prepared by dissolved 19.9 g of kcl in 750ml of water
First, we find the molar mass of KCl which is AK+ACl=39+35.5=74.5g/mole
now we find out the number of moles by dividing the given mass to the molar mass n=m/M=19.9/74.5=0.26 moles. The molarity of a solution is equal to the number of moles divided by the volume of the solution. =0.26moles/0.75liters=0.346M
When electrons are filling energy levels, the lowest energy sublevels are occupied first. This is ____________.
When electrons are filling energy levels, the lowest energy sublevels are occupied first. This is Hund's rule.
Hund's rules state that:
Every orbital in a sublevel has to be singularly occupied before any other orbital is able to be doubly occupied.
All of the electrons in single occupied orbitals have to have the same spin to maximize the total spin.
What is the pH of a 0.02M solution of sodium acetate (pka=4.74) to which you add HCl to a final concentration of 0.015M?
Answer:
pH = 5.22
Explanation:
As you can see, your initial concentration of sodium acetate (NaCH₃COO) is 0.02M (0.02mol /L). When you add HCl, the reaction is:
NaCH₃COO + HCl → CH₃COOH + NaCl.
If you add HCl, and final concentration of NaCH₃COO is 0.015M, the concentration of CH₃COOH is 0.005M.
You can know the pH of this solution using H-H equation:
pH = pKa + log {NaCH₃COO} / {CH₃COOH}
pH = 4.74 + log {0.015M} / {0.005M}
pH = 5.22