Answer:
B. they have less mass than their reactants
Explanation:
In both nuclear fission and nuclear fusion, the products have less mass than their reactants. So, option B is correct.
What is meant by nuclear reaction ?Nuclear reaction is defined as the reaction that involves the collision between one or more atomic nuclei and a highly energetic subatomic particle to produce one or more nuclei along with the emission of a large amount of energy.
Here,
Nuclear fission and fusion are two types of nuclear reactions that involves the production of large amount of energy from atomic nuclei.
Nuclear fission is the nuclear reaction in which a heavier nucleus is split into two or more lighter nuclei, under radioactive condition, with the release of a massive amount of energy.
Nuclear fusion is the nuclear reaction in which two or more lighter nuclei nuclei fuse together under radioactive condition and forms a heavier nuclei and by releasing a large amount of energy.
In both nuclear fission and nuclear fusion, there occurs a release of large amount of energy. This is because most of the mass of the reactants is converted into energy which is known as the mass-energy. So the products of these nuclear reactions will have lesser mass than their reactants.
Hence,
In both nuclear fission and nuclear fusion, the products have less mass than their reactants.
To learn more about nuclear reactions, click:
https://brainly.com/question/12786977
#SPJ3
7.Why are we able to drink cold drink with straw from a bottle?
Explanation:
Because of air pressure
The time T in seconds for a pendulum of length L feet to make one swing is given by Upper T=2\pi \sqrt((L)/(36)). How long is a pendulum (to nearest hundredth) if it makes one swing in 2.1 seconds? Use 3.14 for \pi .
Answer:
3.6ft
Explanation:
Using= 2*π*sqrt(L/32)
To solve for L, first move 2*n over:
T/(2*π) = sqrt(L/32)
Next,eliminate the square root by squaring both sides
(T/(2*π))2 = L/32
or
T2/(4π2) = L/32
Lastly, multiply both sides by 32 to yield:
32T2/(4π2) = L
and simplify:
8T²/π²= L
Hence, L(T) = 8T²/π²
But T = 2.1
Pi= 3.14
8(2.1)²/3.14²
35.28/9.85
= 3.6feet
A train whose proper length is 1200 m passes at a high speed through a station whose platform measures 900 m, and the station master observes that when the train passes it occupies exactly the entire length of the platform. What is the speed of the train?
Answer:
0.66c
Explanation:
Use length contraction equation:
L = L₀ √(1 − (v²/c²))
where L is the contracted length,
L₀ is the length at 0 velocity,
v is the velocity,
and c is the speed of light.
900 = 1200 √(1 − (v²/c²))
3/4 = √(1 − (v²/c²))
9/16 = 1 − (v²/c²)
v²/c² = 7/16
v = ¼√7 c
v ≈ 0.66 c
A snail at position 3 cm moves to position 20 cm in 8 seconds.
Answer: 17cm.
Explanation:
The equation you're using is:
Δd = df - di
Which means the change in position is equal to the final position minus the starting position. In this case that works out to 20cm - 3cm = 17cm. We're only interested in how much the snail moved, not how long it took to move, so even though they give a time it actually doesn't matter for this question.
The graph shows a wave that oscillates with a frequency of 60 Hz. Based on the information given in the diagram, what is the speed of the wave?
Answer:
900 cm/s or 9 m/s.
Explanation:
Data obtained from the question include the following:
Length (L) = 30 cm
frequency (f) = 60 Hz
Velocity (v) =.?
Next, we shall determine the wavelength (λ).
This is illustrated below:
Since the wave have 4 node, the wavelength of the wave will be:
λ = 2L/4
Length (L) = 30 cm
wavelength (λ) =.?
λ = 2L/4
λ = 2×30/4
λ = 60/4
λ = 15 cm
Therefore, the wavelength (λ) is 15 cm
Now, we can obtain the speed of the wave as follow:
wavelength (λ) = 15 cm
frequency (f) = 60 Hz
Velocity (v) =.?
v = λf
v = 15 × 60
v = 900 cm/s
Thus, converting 900 cm/s to m/s
We have:
100 cm/s = 1 m/s
900 cm/s = 900/100 = 9 m/s
Therefore, the speed of the wave is 900 cm/s or 9 m/s.
A ball is thrown vertically upwards from the roof of a building with an initial velocity of 30 m / s. If it stops in the air 220 m above the ground, what is the height of the building?
Answer:
175 m
Explanation:
Given:
y = 220 m
v₀ = 30 m/s
v = 0 m/s
a = -10 m/s²
Find: y₀
v² = v₀² + 2a (y − y₀)
(0 m/s)² = (30 m/s)² + 2 (-10 m/s²) (220 m − y₀)
y₀ = 175 m
If 2N force is applied on 2 kg mass due east and same magnitude of force due west, thechange in velocity of the body in 2 sec is
Explanation:
F=m(v-u)/t
F=2N
m=2kg
t=2s
2=2(v-u)/2
cross multiply
2*2=2(v-u)
4=2(v-u)
4/2=v-u
v-u=2m/s
v-u is the change is velocity.
The change in velocity of the body in 2 sec is 2m/s
According to Newton's second law which states that the change in momentum of an object is directly proportional to the applied force.
Mathematically:
[tex]F \ \alpha \ (\dfrac{v-u}{t} )[/tex]
[tex]F = m (\dfrac{v-u}{t} )[/tex]
where:
m is the mass
(v - u) is the change in velocity
t is the time
F is the applied force
Given the following:
mass m = 2kg
time t = 2secs
Force F = 2N
Required
Change in velocity (v-u)
Substitute the given parameters into the expression shown above:
[tex]2=2(\dfrac{v-u}{2})\\ 2 \times 2=2(v-u)\\4=2(v-u)\\v-u=\dfrac{4}{2}\\v-u=2m/s\\[/tex]
Hence the change in velocity of the body in 2 sec is 2m/s.
Learn more here: https://brainly.com/question/3232705
True or False: Newton's Law
Answer:
True
Explanation:
Newtons Law states that "When a net force acts on a body, it produces acceleration in the body in the direction of the net force. The magnitude of acceleration is directly proportional to the net force and inversely proportional to its mass."
So, it's mathematical form is
=> a ∝ F (1)
=> a ∝ [tex]\frac{1}{m}[/tex]
Combining the proportionality
=> a ∝ [tex]\frac{F}{m}[/tex]
=> F ∝ ma
Using k as proportionality constant.
=> F = kma
Here k = 1
=> F = ma (Proved)
The discharge of a stream is Choose one: likely to decrease downstream in arid regions and increase downstream in temperate regions. typically lower in spring than during summer. constant for the length of the stream. calculated by dividing its cross-sectional area by its velocity.
Answer:
likely to decrease downstream in arid regions and increase downstream in temperate regions
Explanation:
Arid regions are is a region with a severe lack of water, usually to the extent that affect the organisms living in the region. Arid regions are characterized by a very low depth of rainfall per year. Temperate region on the other hand experience more distinct seasonal change and wider temperature change. Temperate regions get a fairly large amount of rainfall per year.
In arid regions, the soil is very dry, and the rate of infiltration and percolation is high relative to the amount of rainfall available. The effect is that more water is infiltrated into the soil as you move downstream, leading to a decrease in the discharge of a stream as you move downstream. Most temperate region have soils that are usually saturated in the peak of the rainfall season, leading to a greater stream discharge as you move downstream.
A monkey is sitting at the top of a tree 25 m high from the ground level. A person standing on the ground wants to feed the monkey. He uses a bow and arrow to launch the food to the monkey. If the person knows that the monkey is going to drop from the tree at the same instant that the person launches the food, how should the person aim the arrow containing the food? Group of answer choices
Answer:
He should aim it at the monkey
Explanation:
The question is related to projectile motion of an arrow from a bow such that the arrow is able to reach a specific target
Therefore, since the monkey is going to drop from the tree the instant the person launches the food, then for the monkey to be able reach the food, we have;
Final level position of the launched food should be ≥ The level of the monkey
As the monkey is dropping from the tree the destination of the launched food should be at the monkey so that before the food gets to the position where the monkey was when launching the food with the arrow, the monkey will be slightly lower so as to be able to catch the food or return up the tree to get the food rather than the food falling to the ground.
You are planning to go to a very cold place where the night temperature drops to -50°C.Which thermometer will you take with you - mercury or alcohol? Why?
Answer:
Explanation:
The range of mercury thermometer is - 37°C to 356°C . At temperature below - 37°C , mercury starts converting into solid so this thermometer becomes non- functional . Hence to measure temperature of - 50°C , alcohol thermometer is suitable . The range of alcohol thermometer is - 112° C to 78°C .
Did to gravity, the moon has a much smaller acceleration than earth. How do you think that would affect the period of pendulum?
I think any pendulum would swing slower on the moon than it would on Earth.
The time it takes a pendulum to go through a complete back and forth swing is:
Time period = 2 π √(length/gravity)
You can see that 'gravity' is in the denominator of the fraction, so the smaller gravity gets, the longer the period gets.
To be a little bit more technical, the period is inversely proportional to the square root of gravity.
So the period for a complete swing on the moon would be √(9.8/1.6) times as long as the complete swing of the same pendulum on Earth.
That number is roughly 2.47 .
So, for every 1 second that a pendulum takes to swing back and forth once on Earth, the same pendulum would take 2.47 seconds to do it on the moon.
Answer:
based on my opinion....
as we know that gravity in moon are less than gravity in earth.. since the force of gravity is less on the moon, the pendulum would swing slower at the same length, angle
and the frequency would be less.
I hope this helps
is lambda a dimensionless quantity?
Answer:
No
Explanation:
lambda represent wavelength
wavelength Since it represents a distance, so its dimension is L.Lambda is a letter in the Greek alphabet. You need it to spell many words in Greek. Also, if you like, you can use it as a variable in an algebraic expression, or as a name for your cat, or to represent a physical or chemical quantity.
The quantity you use it to represent may or may not have dimensions or units of measurement.
If two resistors each of 40 ohms are connected in series what will be its equivalent resistance. If the same resistors are connected in parallel combination what will be the equivalent resistance? ANSWER CORRECTLY, IWILL MARK IT BRAINLIEST.
Explanation:
In case the resistors are in series
R =R1 + R2
R = 40 ohm + 40 ohm
R = 80 ohm
In case the resistors are in parallel
R = 1/R1 + 1/R2
R = 1/40 + 1/40
R = 2/40 ohm
R = 1/20 ohm or R = 0.05 ohm
dont forget to mark brainliest
Answer:
dtwtwerEtbWt
Explanation:
bwtrbtWbTW4TBW4tbW4T4t
Find “d” in the following figure
Answer:
16 m
Explanation:
Given:
v₀ = 4 m/s
a = 4 m/s²
t = 2 s
Find: Δx
Δx = v₀ t + ½ at²
Δx = (4 m/s) (2 s) + ½ (4 m/s²) (2 s)²
Δx = 16 m
name the proces by which heat flows in solids
Answer:
conduction
Explanation:
conduction is the movement of heat from one point to another on a metal.
Hope it helps.
A boy pushes a cart with a constant velocity of 0.5m/s by applying a force of 60 N. What is the total frictional force acting on the cart?
Answer:
The total frictional force equals 60 N
Explanation:
We know that F - f = ma where F is the applied force, f is the frictional force, m the mass of the object and a its acceleration.
Now, since the cart moves with constant velocity, its acceleration is zero. So, a = 0.
So F - f = ma
F - f = m(0) = 0
F - f = 0
So, F = f
From the above, we see that the frictional force equals the applied force which is equal to 60 N.
So, f the total frictional force equals 60 N
It has been a hot summer, so when you arrive at a lake, you decide to go for a swim even though it it nighttime. The water is cold. The next day, you go swimming again during the hottest part of the day, and even though the air is warmer the water is still almost as cold. Why?
(a) Water is fairly dense compared with many other liquids.
(b) Water remains in a liquid state for a wide range of temperatures.
(c) Water has a high bulk modulus.
(d) Water has a high specific heat.
Answer:
(d) Water has a high specific heat.
Explanation:
At night, when the temperature of earth goes down due to loss of heat , the temperature of water is lost slowly and temperature of land is lost fast because of high specific heat of water . Water loses as well as gains temperature comparatively slowly due to its high specific heat .
During daytime when earth gains heat , the temperature of land rises more rapidly than water so water appears cool even during daytime when land becomes hotter . It is also due to high heat holding capacity of water or due to high specific heat of water .
A machine takes 0.5 seconds to move a brick 1 meter and put 100 Joules of energy into it. (hint: Power is the amount of energy transferred or converted per unit time. Or we say power is work done per unit time. LaTeX: P\:=\:\frac{W}{t}P = W t) This machine would expend more power in this action if it:
Answer:
200 Watts.
Explanation:
Power is defines as the amount of work expended per unit time. Mathematically, it is expressed as Power = Workdone/Time
Given parameters
Energy used up 100Joules
Distance moved by brick = 1 meters
Time taken by the machine = 0.5 secs
Power can also be written as Energy/Time
Required
We need to calculate the amount of power used up.
Power = 100J/0.5s
Power = 100/(1/2)
Power = 100 * 2/1
Power = 200Watts.
This shows that the machine would expend 200Watts of power
The maximum pressure most organisms can survive is about 1000 times the atmospheric pressure. Only small, simple organisms such as bacteria can survive such high pressures. What then is the maximum depth at which these organisms can live under the sea (assuming that the density of seawater is 1025 kg/m3)
Answer:
h = 10000 m
Explanation:
The pressure applied at a depth of the liquid is given by:
P =ρgh
where,
P = Maximum Pressure to Survive = (1000)(Atmospheric Pressure)
P = (1000)(101325 Pa) = 1.01 x 10⁸ Pa
ρ = Density of sea water = 1025 kg/m³
g = 9.8 m/s²
h = maximum depth to survive = ?
Therefore,
1.01 x 10⁸ Pa = (1025 kg/m³)(9.8 m/s²)h
h = (1.01 x 10⁸ Pa)/(1025 kg/m³)(9.8 m/s²)
h = 10000 m
Given a volume of 1000. сm of an ideal gas at 300. K, what volume would it occupy at a temperature of 600. K?
Answer:
2000 cm³
Explanation:
Assuming the pressure is constant:
V / T = V / T
1000 cm³ / 300 K = V / 600 K
V = 2000 cm³
A patient had stunted growth,swelling on face,discolaration of hair and skin disease.the doctor advised him to eat a lot of pulses,grams,albumin of the egg and milk etc.,which is wrong with the patient?Explain in two sentences
Answer:
The patient is suffering from protein deficiency
Explanation:
Protein deficiency is characterized by symptoms such as stunted growth; skin, nail and hair problems, loss of muscle mass, and in extreme cases, kwashiorkor.
Deficiency in protein is usually corrected by taking foods rich in protein such as egg's albumin, milk, pulses, beans, etc; hence the advice of the doctor.
Why is hydraulic jack used ? Write.
Answer:
it is used because
It occupies less spaceheavy loads are easily movedminimum of effort is usedit is a bit lighter than screw jacks.They are also less likely to jam due to rust in the screw thread.
Hydraulic jacks are often used to lift elevators in low and medium rise buildings.
A hydraulic jack uses a liquid that is forced into a cylinder by a pump plunger.
Laboratory measurements show hydrogen produces a spectral line at a wavelength of 486 nm. A particular galaxy's spectrum shows the same hydrogen line at a wavelength of 484 nm. What can we conclude?
Answer:
*if a hydrogen emission line is observed in the galaxy, this implies that the galaxy has a significant amount of a chemical element
*difference between the two wavelengths e can be explained by the relativistic Doppler effect
Explanation:
The emission of the materials depends on the distribution of the electrons around the atoms and their possible transitions. These emissions are maintained even when the element is mixed in some compound.
Consequently, if a hydrogen emission line is observed in the galaxy, this implies that the galaxy has a significant amount of a chemical element.
The small difference between the two wavelengths e can be explained by the relativistic Doppler effect, due to the movement of the galaxy
A ball that rolls on the ground is initially propelled with a speed of 45 km / h and after 10 seconds it stops. Assuming you lost speed constantly, then: a) Calculate the acceleration b) Calculate the distance traveled.
Answer:
a) -1.25 m/s²
b) 62.5 m
Explanation:
Convert km/h to m/s:
45 km/h × (1000 m/km) × (1 h / 3600 s) = 12.5 m/s
a = Δv / Δt
a = (0 m/s − 12.5 m/s) / 10 s
a = -1.25 m/s²
Δx = ½ (v + v₀) t
Δx = ½ (0 m/s + 12.5 m/s) (10 s)
Δx = 62.5 m
Newton’s third law of motion explains the two forces namely ‘action’ and ‘reaction’ coming into action when the two bodies are in contact with each other. These two forces: *
(a) Always act on the same body
(b) Always act on the different bodies in opposite directions
(c) Have same magnitude and direction
(d) Acts on either body at normal to each other
Pls fast
(b) Always act on the different bodies in opposite directions
Answer:
b) Always act on the different bodies in opposite directions
Explanation:
b) Always act on the different bodies in opposite directions
For example:
If I am sitting on a sofa and I exert 370N and the sofa will exert -370N force. If the sofa doesn't exert force back, I won't be able to sit which means it will break.
Hope it helps ;) ❤❤❤
A charged particle with charge of 2 (uC) and mass 10-20 (kg) is traveling with velocity of 108 (m/s) in space. The charge reaches to a region in space with magnetic field of 0.05 (T) and experience a force of 8 (N) exerted by the magnetic field.
A- What is the angle between velocity of particle and magnetic field direction?
B- What is acceleration of charged particle while experiencing the force?
Answer:
Explanation:
A ) Let the angle be θ between magnetic field and velocity of charged particle
Force created on charged particle F
= Bqv sinθ, B is magnetic field , q is charge , v is velocity of charged particle
F = .05 x 2 x 10⁻⁶ x 10⁸ x sinθ
8 = 10 sinθ
sinθ = .8
θ = 53°.
B )
acceleration = force / mass
= 8 / 10⁻²⁰
= 8 x 10²⁰ m / s²
A uniform string of length 10.0 m and weight 0.32 N is attached to the ceiling. A weight of 1.00 kN hangs from its lower end. The lower end of the string is suddenly displaced horizontally. How long does it take the resulting wave pulse to travel to the upper end
Answer: 0.0180701 s
Explanation:
Given the following :
Length of string (L) = 10 m
Weight of string (W) = 0.32 N
Weight attached to lower end = 1kN = 1×10^3
Using the relation:
Time (t) = √ (weight of string * Length) / weight attached to lower end * acceleration due to gravity
g = acceleration due to gravity = 9.8m/s^2
Weight of string = 0.32N
Time(t) = √ (0.32 * 10) / [(1*10^3) * (9.8)]
Time = √3.2 / 9800
= √0.0003265
= 0.0180701s
mathematically boyle's law is
Explanation:
Boyles law is the pressure of a fixed mass of gas which is inversely proportional to its volume provided that the temperature is kept constant.
A load of 500N is carried by 200N effort in a simple machine having load distance 3m Calculate effort distance.
Answer:
2.5 mExplanation:
Load ( L ) = 500 N
Effort ( E ) = 200 N
Load distance ( LD ) = 3 m
Effort distance ( ED ) = ?
Now, Let's find the Effort distance ( ED )
We know that,
Output work = Input work
i.e L × LD = E × ED
plug the values
[tex]500 \times 3 = 200 \times ED[/tex]
multiply the numbers
[tex]1500 = 200 \times ED[/tex]
Swipe the sides of the equation
[tex]200 \: ED \: = 500[/tex]
Divide both sides of the equation by 200
[tex] \frac{200 \: ED}{200} = \frac{500}{200} [/tex]
Calculate
[tex]ED\: = 2.5 \: m[/tex]
Hope this helps..
best regards!!