Answers
sens organ is the eye example
Related Questions
three condition necessary for the formation of stationary
wave
Answers
Answer:
Two waves must be having same wavelength, frequency, amplitude and travelling in the opposite direction.
If a 9V battery produces a current of 3 A through a load, what is the resistance of the load
Answers
3 ohms hope this helps :D ❤
Answer:
3 ohms
Explanation:
pls discuss the concepts in which architectural forms/visuals correlate in the design process
Answers
Answer:
Visual connectivity refers to the tangible aspects of a space; extent to which a place can be viewed from other places. It is believed that the design properties of a spatial layout of an atrium leaves unobstructed views horizontally and vertically.
Explanation:
QUESTION 7
Technician A says both OEM and TCMC brake pad kits come with new shims.
Technician B says TCMC products have a 12-digit part number instead of the traditional 10 digits.
Who is right?
Select the correct option and click NEXT
A only
B only
A
Both A and B
Neither A nor B
Answers
Answer:
Explanation:
Both a and B
In these two statements by Technician A and Technician B, C. Both A and B are correct.
OEM means Original Equipment Manufacturer, while TCMC means Toyota Complete Maintenance Care. OEM brake pad kits come with new shims as TCMC brake pad kits.
Traditional part numbers bear 10-digits, but TCMC products bear 12-digit part numbers.
Thus, we can conclude from the statements by Technician A and Technician B that C. Both Technician A and Technician B are correct.
Learn more about maintenance processes with the original equipment manufacturer and TCMC parts here: https://brainly.com/question/4789600
https://screenshot.best/2QA8H0
Check screen shot
Answers
Answer:
okay checked it
Explanation:
Engineered lumber should not be used for
A. finger-jointed studs.
B. plywood roof sheathing.
C. composite panel garage doors.
D. items that are in contact with concrete.
Answers
Answer:
Composite panel garage doors
Explanation:
Engineered lumber should not be used for composite panel garage doors. Hence, option C is correct.
What is a Pane lift garage door?Horizontal panels are connected to form a single garage door in panel lift doors, sometimes referred to as sectional doors. These panels have wheels attached to them that are positioned in tracks on either side and guide the door through a reasonably sharp turn to reposition it horizontally above the garage door opening.
Yes, however it's crucial to have a pro take their place for the finest outcomes. It can be unsafe for anybody other than a professional to install garage doors due to their complexity and difficulty.
One of the most affordable solutions on the market is an aluminum garage door. They are available in a variety of design options that can complement the exterior style of your home. Low-cost aluminum garage doors.
Thus, option C is correct.
For more information about Pane lift garage door, click here:
https://brainly.com/question/28809942
#SPJ2
4. Find the future worth in year 10 of an investment that starts at $8000 in year 1 and
increases by 10% each year. The interest rate is 10% per year.
Answers
Explanation:
I have asked question in my profile please tell me the answer
What output will come for the expression (4.00/(2.0+2.0)) answer
Answers
In the base of mechanical science knowledge, define work, energy and power
Answers
Answer:
Work is the amount of energy transfered by a force.
Energy is the amount of power an object gets from its position or motion.
Power is the combination of all forces and movements of a system that is the rate at which work can be done by a system.
noooo plssschvwekjshdjkshdjkshdjksahdk
Answers
Answer:
chehdhfhfhd
Explanation:
fjrjshrhdhr
Question 2
Sarah was recently promoted to a managerial position at her industrial engineering company. With her new role, she is now responsible for overseeing the company's production factory, meaning approximately 50 factory workers now report to her. Although Sarah previously worked as an engineer and did not have any experience running a factory, she is excited to begin her new position. At the end of her first day, Sarah is confused to see her factory workers continuing to work well past the end of their 8-hour shift. She then goes to the factory supervisor (who reports to her) to express concern because the factory does not have the budget to pay so many workers overtime. The supervisor smiles at Sarah and explains that the factory meets production goals by making the factory workers work off the clock. The workers are well aware of this expectation and went along with it in order to keep their jobs. Sarah is shocked to learn this illegal practice had become part of the company culture, but the supervisor explains that the company's CEO (who is Sarah's boss) is well aware of this expectation.
What shouldSarah do ? (15)
Answers
Analyzing the information from the case above, the ideal would be Sarah to schedule a meeting with your boss to expose the facts and seek a solution, as this is an ethical dilemma that she became aware of and as a new manager she will have to deal with it.
She became aware of an illegal practice that has become part of the company's culture and that her boss is aware of this illegality.
Sarah needs to be aware that her talk about the possibility of changing company policy and complying with ethics could jeopardize her job.
But on the other hand, if Sarah's boss does not accept to change the company's ethical parameters, she will also be running the risk of being part of this illegal act and damaging her reputation.
Therefore, the best option for Sarah is to be honest and talk to her boss about the situation.
In this way, it can help workers receive their rights, if their argument is accepted, and transform the company into an ethical place with a culture focused on the development and compliance with ethics and legislation.
Learn more here:
https://brainly.com/question/22204062
Analyze the scope of residential and commercial construction (i.e. what is each comprised of) and provide an example of what the product development process would look like for either a residential or commercial construction project
Answers
Answer:
Analyzing building related carbon emissions remains as one of the most increasing interests in sustainability research. While majority of carbon footprint studies addressing buildings differ in system boundaries, scopes, GHGs and methodology selected, the increasing number of carbon footprint reporting in response to legal and business demand paved the way for worldwide acceptance and adoption of the Greenhouse Gas Protocol (GHG Protocol) set by the World Resources Institute (WRI) and World Business Council for Sustainable Development (WBCSD). Current research is an important attempt to quantify the carbon footprint of the U.S. residential and commercial buildings in accordance with carbon accounting standards and Scopes set by WRI, in which all possible indirect emissions are also considered. Emissions through the construction, use, and disposal phases were calculated for the benchmark year 2002 by using a comprehensive hybrid economic input–output life cycle analysis. The results indicate that emissions from direct purchases of electricity (Scope 2) with 48% have the highest carbon footprint in the U.S. buildings. Indirect emissions (Scope 3) with 32% are greater than direct emissions (Scope 1) with 20.4%. Commuting is the most influential activity among the Scope 3 emissions with more than 10% of the carbon footprint of the U.S. buildings overall. Construction supply chain is another important contributor to the U.S. building's carbon footprint with 6% share. Use phase emissions are found to be the highest with 91% of the total emissions through all of the life cycle phases of the U.S. buildings.
Explanation:
One of the areas of sustainability research that is receiving the greatest attention right now is the analysis of building-related carbon emissions. Although the bulk of studies on carbon footprints of buildings have different system limits, scopes, GHGs, and methodology choices.
What is construction?Building, road, bridge, or other structure construction, as well as steel structure manufacturing, are all considered to be part of the category of "construction works."
Building for commercial use is referred to as commercial construction. Commercial construction includes building for shops, offices, and educational institutions.
Residential development is concentrated on creating homes. Residential construction includes buildings like houses, apartments, and housing complexes.
With a 6% share, the construction supply chain is a significant contributor to the carbon footprint of American buildings.
With 91% of all emissions from all phases of the life cycle of American structures, use phase emissions are determined to be the greatest.
Thus, this is the scope of residential and commercial construction.
For more details regarding construction work, visit:
https://brainly.com/question/30049624
#SPJ2
Un buque de 500ton de desplazamiento tiene un KG de 5m y un KM de 7.5, la embarcación recibe un carga de 700ton con un KG de 4m. Calcule la cantidad de carga que puede llevar para que el buque navegue con un GM positivo de 0.3 y proponga la posición del centro de gravedad de la carga.
Answers
Answer:
500 kG con 0 .3Explanation:
700 gramosResponding to the campaign of 4 classes, 7A, 7B, 7C, 7D contributed the amount of support proportional to the numbers 8,6;7;5 knowing the total amount of the two classes 7A, 7B is more than 7D 810 thousand VND sso the money each class has contributed
Answers
Writing life on my fantasy planet
the image shown below is a part of a closed electrical circuit. then VA - VB is
Answers
The potential difference ([tex]V_A-V_B[/tex]) is found to be 18 V. Thus, the correct option for this question is A.
What is the Potential difference?The potential difference may be characterized as the difference in the amount of energy that charge carriers have between two points in a circuit. It is always measured in volts, i.e. also called voltage.
According to the context of this question,
The direction of the flow of electric current is thought to be from point A to point B. Now, applying Kirchoff's law, along with the sign convention rule, the formula is:
[tex]V_A[/tex] - 3 - (3×1) - (6×3) = [tex]V_B[/tex].[tex]V_A[/tex] - 3 - 3 -18 = [tex]V_B[/tex].
[tex]V_A-V_B[/tex] = 18 V.
Therefore, the potential difference ([tex]V_A-V_B[/tex]) is found to be 18 V. Thus, the correct option for this question is A.
To learn more about Potential differences, refer to the link:
https://brainly.com/question/24142403
#SPJ6
2. What of the following demonstrates a
correct principle of safe knife use?
A. Always use a sawing motion to safely
cut gradually
B. Always cut away from the body.
C. Always cut with the nearest person
directly in front of you. .
O D. Always cut directly across the wire.
Answers
PARKING LOT PANELBOARD FEEDER DEMAND LOADING:
A parking lot panelboard is supplying 62 parking stalls on 15 amp circuits which are
restricted or controlled. Determine the total calculated demand load in kW for the
FEEDER conductors supplying the panelboard.
The calculated demand load is ____ kW
Answers
Answer:
77kw
Explanation:
just add them
7. The ____ is a device that connects a stationary object to a fall restraint vest.
A. restraint
B. tie-off
C. lanyard
D. sling
Answers
The lanyard is a device that connects a stationary object to a fall restraint vest. The correct option is C. lanyard
How to explain the informationThe answer is C. lanyard. A lanyard is a short length of rope or chain with a snap hook on one end that is used to connect a fall restraint vest to a stationary object. The other end of the lanyard is attached to the vest.
The other options are incorrect. A restraint is a device that prevents someone from moving freely. A tie-off is a secure attachment point for a lanyard. A sling is a piece of fabric that is used to support a load.
The correct option is C
Learn more about device
https://brainly.com/question/28498043
#SPJ2
1. In a safe approach to electrical work,
what should you always do immediately
before touching any electrical conductor?
A. Remove all electrical loads from the
circuit.
B. Check the condition of all circuit
breakers in the load center.
O C. Measure the voltage on the conductor
with a known good meter.
O D. Consult the NEC.
Answers
Answer:
D. Measure the voltage on the conductor with a known good meter
Explanation:
In a safe approach to electrical work,the thing that you should always do immediately before touching any electrical conductor is C. Measure the voltage on the conductor with a known good meter.
What should be done immediately before touching any electrical conductor?One should never touch any wires or conductors until you are certain that their electrical supply has been turned off. Circuits must be locked out and marked with a tag to prevent re-energizing them. A conductor is always risky. Before working on a circuit, always test to make sure it is deenergized.
The action you should always do right away before touching any electrical conductor is the safest approach to electrical work. Use a reputable meter to measure the voltage across the conductor.
Learn more aboutconductor at;
https://brainly.com/question/30759857
#SPJ3
Why are you asked to draw a sketch of a Bridge-Design on a graph sheet/A4 sheet?
Answers
Engineers or architects can be asked to draw a sketch of a bridge-design on a graph sheet or A4 paper to communicate their ideas and scale their drawings.
Architectural sketches are about the communication of ideas. Engineers and architects use hand sketching to clarify elements of the design to the contractor or client.
It should be noted that drawings can also be drawn on a graph sheet or A4 paper to represent the detail before it's eventually constructed.
Scale drawings are used for the illustration of items that are not convenient to draw their actual size. In the construction industry, scales are used depending on the nature of the drawing. Drawings can be made on a graph or A4 paper due to the ease of printing, reproducing, and resizing the drawings.
Read related link on:
https://brainly.com/question/20689874
A thermocouple gives an output of 0.2 mV for each degree change in temperature. What will be the word length required when its output passes through an analogue-to-digital converter if temperatures from 0 to 1000 oC are to be measured with a resolution of 0.5 oC?
Answers
9514 1404 393
Answer:
11 bit
Explanation:
The number of resolution units required is ...
(1000 °C -0 °C)/(0.5 °C) = 2000
log2(2000) = 10.97, so an unsigned word length of 11 bits is the minimum required.
vết nứt tế vi là gì?