what force attracts protons inside a nucleus to each other is the residual strong force, also known as the nuclear force. This force is much stronger than the electromagnetic force, which would typically repel positively charged particles like protons.
what force attracts protons inside a nucleus to each other is the residual strong force, also known as the nuclear force. This force is much stronger than the electromagnetic force, which would typically repel positively charged particles like protons. The residual strong force is mediated by the exchange of particles called mesons between protons and neutrons in the nucleus. The weak nuclear force also plays a role in holding the nucleus together, but it is much weaker than the residual strong force.
that the force that attracts protons inside a nucleus to each other is the residual strong force.
The residual strong force, also known as the nuclear force, is responsible for binding protons and neutrons together in the nucleus of an atom. It is a residual effect of the strong nuclear force, which is the force that holds quarks together within protons and neutrons. The residual strong force is stronger than the electrostatic repulsion between protons, allowing the nucleus to remain stable.
To know more about protons, visit
https://brainly.com/question/1252435
#SPJ11
a frictionless pendulum clock on the surface of the earth has a period of 1.00 s. on a distant planet, the length of the pendulum must be shortened slightly to have a period of 1.00 s. what is true about the acceleration due to gravity on the distant planet? a frictionless pendulum clock on the surface of the earth has a period of 1.00 s. on a distant planet, the length of the pendulum must be shortened slightly to have a period of 1.00 s. what is true about the acceleration due to gravity on the distant planet? the gravitational acceleration on the planet is slightly less than g . the gravitational acceleration on the planet is equal to g . the gravitational acceleration on the planet is slightly greater than g . we cannot tell because we do not know the mass of the pendulum.
The period of a pendulum is dependent on the length of the pendulum and the acceleration due to gravity (g). In this scenario, we know that the period of the pendulum on the surface of the earth is 1.00 s, meaning that the length of the pendulum is calibrated to the value of g on earth.
However, on the distant planet, the length of the pendulum must be shortened slightly to have the same period of 1.00 s.
This tells us that the value of g on the distant planet must be slightly less than g on earth. If the value of g were equal to or greater than g on earth, the pendulum would have a shorter period, and the length of the pendulum would not need to be shortened. Therefore, we can conclude that the gravitational acceleration on the distant planet is slightly less than g on earth.
The mass of the pendulum is not a factor in determining the value of g on the distant planet, as it only affects the period of the pendulum on earth. Therefore, we do not need to know the mass of the pendulum to answer this question.
learn more about pendulum here
https://brainly.com/question/13990836
#SPJ11
the last planet forming process is: accretion of materials into a planetesimal. atmosphere formation. density differentiation. all of the above.
The last planet forming process involves several stages, including accretion of materials into a planetesimal, atmosphere formation, and density differentiation.
Accretion of materials into a planetesimal involves the gathering of particles and small objects in space to form a larger body. This is how asteroids and comets are formed, as well as the building blocks of planets. As these materials come together, they begin to collide and stick together due to gravity, forming larger and larger bodies over time. This process eventually leads to the formation of planetesimals, which are large enough to have their own gravitational pull and begin to shape the surrounding area of space.
Atmosphere formation is another crucial step in the planet forming process. As planetesimals continue to gather material and grow, they begin to develop an atmosphere. This can happen through several processes, such as outgassing of volatile compounds or accretion of gas from the surrounding disk of material. The composition and density of the atmosphere will depend on factors such as the size and distance from the star, as well as the materials available in the surrounding area.
Finally, density differentiation is the process by which a planet separates into distinct layers of varying density. This occurs as the planet continues to grow and its internal pressure increases. The heavier elements sink towards the center, while lighter elements form the outer layers. This process is what gives rise to the distinct layers of Earth's interior, such as the mantle and core.
The last planet forming process is "all of the above" - accretion of materials into a planetesimal, atmosphere formation, and density differentiation are all important steps in the formation of a planet.
To know more about planet, refer
https://brainly.com/question/28430876
#SPJ11
Find the work done by the force field F(x,y) = x^2i+ye^xj on a particle that moves along the parabola x=y^2+1 from (1,0) to (2,1).
The work done by the force field F(x,y) = x²i + yeˣj on the particle moving along the parabola x = y² + 1 from (1,0) to (2,1) is 67/15 units.
The work done by a force field along a path is given by the line integral of the force field over the path. The line integral of a vector field F along a smooth curve C is given by:
∫CF · dr = ∫ab F(r(t)) · r'(t) dt
where F is the vector field, r(t) is the position vector of the curve at time t, and a and b are the limits of integration.
In this case, the path is the parabola x = y² + 1, and the limits of integration are t = 0 to t = 1. We can parameterize the path by setting y = t and x = t² + 1, so that the position vector r(t) = (t² + 1)i + tj and r'(t) = 2ti + j.
Substituting this into the line integral, we get:
∫CF · dr = ∫₀¹ F(r(t)) · r'(t) dt
= ∫₀¹ [(t² + 1)²i + teˣj] · (2ti + j) dt
= ∫₀¹ (2t³ + 2t + teˣ) dt
= [t⁴ + t² + teˣ]₀¹
= 2 + e - 1
= 1 + e
Therefore, the work done by the force field along the parabola is 1 + e units.
Learn more about work done here:
https://brainly.com/question/2750803
#SPJ11
you put a mirror at the bottom of a 2.3-m-deep pool. a laser beam enters the water at 29 ∘ relative to the normal, hits the mirror, reflects, and comes back out of the water.. How far from the water entry point will the beam come out of the water?
The beam will exit the water about 0.67 meters away from the entry point.
When the laser beam enters the water, it bends due to the change in refractive index between air and water. The angle of refraction can be calculated using Snell's law:
n1 sin θ1 = n2 sin θ2
where n1 and θ1 are the refractive index and angle of incidence in air, and n2 and θ2 are the refractive index and angle of refraction in water. Assuming a refractive index of 1.33 for water, we have:
1.00 sin 29° = 1.33 sin θ2
Solving for θ2, we get θ2 ≈ 21.2°.
When the beam hits the mirror, it reflects at the same angle of incidence. Therefore, the angle of incidence and refraction at the interface between the mirror and water are also 29° and 21.2°, respectively.
As the beam exits the water, it bends again due to the change in refractive index. This time, the angle of incidence is 21.2° and the angle of refraction in air can be calculated as:
1.33 sin 21.2° = 1.00 sin θ3
Solving for θ3, we get θ3 ≈ 16.3°.
Finally, we can use simple trigonometry to find the distance x between the water entry point and the point where the beam exits the water:
x = 2.3 m tan θ3 ≈ 0.67 m
Therefore, the beam will exit the water about 0.67 meters away from the entry point.
To know more about Snell's law, refer here:
https://brainly.com/question/2273464#
#SPJ11
An object is held at rest on top of a smooth plane inclined at 30° to the horizontal. when released, it takes 5s for it to slide down the plane. Calculate the (a) distance covered and (b) height of the plane. (g = 10m/s²)
Answer:
(a) To calculate the distance covered, we can use the equation:
distance = 1/2 * acceleration * time²
The acceleration of the object down the inclined plane can be found using trigonometry:
acceleration = g * sin(30°) = 5 m/s²
So the distance covered is:
distance = 1/2 * 5 m/s² * (5 s)² = 62.5 m
(b) To calculate the height of the plane, we can use the equation:
height = distance / sin(30°)
Substituting the value of distance we calculated in part (a), we get:
height = 62.5 m / sin(30°) ≈ 125 m
Therefore, the height of the plane is approximately 125 meters.
if a sound is approaching you, it will sound slightly higher in frequency to you than it would to an object moving along with it. if a sound source is receding from you, it will sound slightly lowered frequency to you than it would to an object moving along with it. this phenomenon is called the
The phenomenon you are referring to is called the Doppler effect. This effect occurs because sound waves are a type of wave that requires a medium (such as air) to travel through.
When an object emitting sound waves is moving, it causes the waves to either compress or stretch, depending on the direction of movement. This compression or stretching of the waves changes the frequency of the sound waves and consequently the pitch of the sound that we hear.
When an object emitting sound waves is moving towards you, it compresses the sound waves, resulting in a higher frequency and a higher pitch. This is why the sound will sound slightly higher in frequency to you than it would to an object moving along with it.
Conversely, when an object emitting sound waves is moving away from you, it stretches the sound waves, resulting in a lower frequency and a lower pitch. This is why the sound will sound slightly lowered frequency to you than it would to an object moving along with it.
Overall, the Doppler effect is an important concept in understanding the behavior of sound waves and how they are affected by the movement of objects.
Learn more about medium here:
brainly.com/question/28235354
#SPJ11
a nucleus with binding energy eb1 fuses with one having binding energy eb2. the resulting nucleus has a binding energy eb3. what is the total energy released in this fusion reaction?
The total energy released in this fusion reaction is ΔE = (eb₁ + eb₂) - eb₃.
In a fusion reaction, two nuclei with binding energies eb₁ and eb₂ combine to form a single nucleus with binding energy eb₃. The energy released during this process is the difference between the sum of the initial binding energies and the final binding energy.
To calculate the total energy released in a fusion reaction, simply subtract the final binding energy (eb3) from the sum of the initial binding energies (eb1 + eb2).
To know more about fusion reaction, visit:
https://brainly.com/question/4837991
#SPJ11
You are in a car and blindfolded. How could
you tell if the car is accelerating or decelerating?
Explain your reasoning
b) Calculate the average distance among the electrons for a 1 nm2 probe with a total current of 100 nA: 1) 30 keV electrons and 2) 0.1 keV electrons. (10 points) Hint 1: you can assume that the electrons are uniformly distributed both laterally and along the electron beam direction. Hint 2: you do not need to consider the space-charge effects (including the Boersch and Loeffler effect) due to electron-electron interactions within the probe. Hint 3: for simplicity, you can assume that the electrons are traveling with a convergence angle = 0. Therefore, you can view the electron beam as a cylinder-like beam. -
The average distance among the electrons for 0.1 keV electrons is larger than for 30 keV electrons, due to the lower velocity and higher number of electrons.
The average distance among the electrons can be calculated using the formula:
[tex]d = \sqrt{(A/N)[/tex]
where
A is the area of the probe and
N is the number of electrons within the probe.
For 1) 30 keV electrons:
The current I = Q/t,
where
Q is the charge and
t is the time.
The charge can be calculated using the formula:
Q = Ne,
where
N is the number of electrons and
e is the charge of an electron.
For 30 keV electrons, the charge can be calculated as:
Q = Ne = I*t/e
[tex]= (100*10^{-9})/(1.6*10^{-19})[/tex]
= 625*10⁶ electrons.
The number of electrons within the probe can be calculated using the formula:
N = I/(e*v*A),
where
v is the velocity of the electrons and
A is the area of the probe.
For 30 keV electrons, the velocity can be calculated using the formula:
[tex]v = \sqrt{ (2*E/m)[/tex],
where
E is the kinetic energy and
m is the mass of the electron.
v = [tex]\sqrt{(2*30*10^3*1.6*10^{-19}/9.11*10^{-31})[/tex]
= 2.28*10⁸ m/s.
The area of the probe is given as [tex]1 nm^2 = 10^{-18} m^2[/tex].
N = I/(e*v*A)
[tex]= (100*10^{-9})/(1.6*10^{-19}*2.28*10^8*10^{-18})[/tex]
= 2.23*10¹⁰.
Therefore, the average distance among the electrons is:
[tex]d = \sqrt{(A/N)[/tex]
[tex]= \sqrt{(10^{-18}/2.23*10^{10})[/tex]
= 2.12*10⁻¹⁵ m.
For 2) 0.1 keV electrons:
Following the same procedure as above, we get:
Q = Ne = I*t/e
[tex]= (100*10^{-9})/(1.6*10^{-19})[/tex]
= 625*10⁶ electrons.
[tex]v = \sqrt{(2*E/m)[/tex]
[tex]= \sqrt{(2*0.1*10^3*1.6*10^{-19}/9.11*10^{-31})[/tex]
= 7.65*10⁶ m/s.
N = I/(e*v*A)
[tex]= (100*10^{-9})/(1.6*10^{-19}*7.65*10^6*10^{-18})[/tex]
= 8.62*10⁸.
[tex]d = \sqrt{(A/N)[/tex]
[tex]= \sqrt{ (10^{-18}/8.62*10^8)[/tex]
= 1.18*10⁻¹⁴ m.
Therefore, the average distance among the electrons for 0.1 keV electrons is larger than for 30 keV electrons, due to the lower velocity and higher number of electrons.
To know more about electrons refer here
brainly.com/question/12001116#
#SPJ11
the photoelectric effect tells us that question 1 options: a) electrons have a wave nature. b) a photon can be converted into an electron. c) light has a particle nature. d) electrons are the conductors in metals
The photoelectric effect is a phenomenon that occurs when light is shone on a metal surface, causing electrons to be emitted from the surface. This effect was first observed by Heinrich Hertz in 1887 and later explained by Albert Einstein in 1905. So the answer is c.
The photoelectric effect also provides evidence for the particle nature of light, as it shows that light energy is transferred in discrete packets (photons) rather than as a continuous wave.
The photoelectric effect is observed when the light of a certain frequency (known as the threshold frequency) is shone on a metal surface. When the light hits the surface, it transfers energy to the electrons in the metal. If the energy of the light is greater than the energy required to remove an electron from the metal (known as the work function), the electron will be emitted from the surface.
The key insight provided by Einstein's explanation of the photoelectric effect was that the energy of the light is transferred to the electrons in discrete packets, or quanta, rather than being continuously distributed over the wavefront of the light. Each quantum of light, or photon, has a specific amount of energy that depends on the frequency of the light.
The photoelectric effect also provides insight into the behaviour of electrons in metals. However, it does not necessarily imply that electrons have a wave nature, nor does it have anything to do with the conductivity of metals. The conductive properties of metals are due to the presence of free electrons that are able to move through the material, rather than being emitted from the surface as in the photoelectric effect.
To know more about the Photoelectric Effect visit:
https://brainly.com/question/26465043
#SPJ11
two long parallel wires are placed side by side on a horizontal table. the wires carry equal currents in the same direction. which of the following statements are true?check all that apply.two long parallel wires are placed side by side on a horizontal table. the wires carry equal currents in the same direction. which of the following statements are true?check all that apply.the magnetic force between the two wires is attractive.the magnetic field at a point midway between the two wires is zero.the magnetic field is a maximum at a point midway between the two wires.the magnetic force between the two wires is repulsive.request answer
The correct statements are:1. The magnetic force between the two wires is attractive. 2. The magnetic field at a point midway between the two wires is zero.
The magnetic force between the two wires is repulsive. This is because the currents in the wires are flowing in the same direction, which creates magnetic fields that interact with each other in a way that causes them to repel.
- The magnetic force between the two wires is attractive: This statement is false because, as mentioned above, the currents in the wires are flowing in the same direction, which causes them to repel each other.
- The magnetic field at a point midway between the two wires is zero: This statement is also false. The magnetic field at a point midway between the two wires is actually a maximum because the magnetic fields created by each wire add together constructively at this point.
- The magnetic field is a maximum at a point midway between the two wires: This statement is true, as explained above.
- The magnetic force between the two wires is repulsive: This statement is true, as explained above.
1. When two parallel wires carry equal currents in the same direction, their magnetic fields interact with each other in such a way that the magnetic force between the wires is attractive. This is due to the alignment of the magnetic fields produced by the currents, causing the fields to combine and pull the wires towards each other.
2. The magnetic field at a point midway between the two wires is zero because the magnetic fields produced by the two wires cancel each other out at this point. Since the wires are carrying equal currents in the same direction, the magnetic fields have equal magnitudes and opposite directions at the midpoint, thus their net effect is zero.
The other two statements are incorrect because:
- The magnetic field is not a maximum at a point midway between the two wires, as explained in statement 2.
- The magnetic force between the two wires is not repulsive, as explained in statement 1.
To know more about magnetic force refer to
https://brainly.com/question/3160109
#SPJ11
what is the linear velocity of the point two-thirds the length of the rod away from its lower end when it hits the floor?
The linear velocity of the point two-thirds the length of the rod away from its lower end when it hits the floor is sqrt(2gh/3), where g is the acceleration due to gravity and h is the height from which the rod is dropped.
To calculate the linear velocity of the point two-thirds the length of the rod away from its lower end when it hits the floor, we need to use the conservation of energy principle. We know that the potential energy at the top of the rod is equal to the kinetic energy when it hits the floor.
Assuming the rod is dropped from rest and neglecting air resistance, we can use the equation:
mgh = (1/2)mv^2
Where m is the mass of the rod, g is the acceleration due to gravity, h is the height of the rod, and v is the velocity of the rod when it hits the floor.
Since the point two-thirds the length of the rod away from its lower end has traveled (1/3)h, we can use the proportion:
(1/3)h / (2/3)l = h / L
Where l is the length of the rod and L is the distance from the lower end to the point two-thirds the length of the rod away.
Rearranging, we get:
L = (2/3)lh / h = (2/3)l
Substituting into the first equation and solving for v, we get:
v =√(2gh/3)
To know more about linear velocity visit:
https://brainly.com/question/13723307
#SPJ11
Find a unit vector in the direction of v and in the direction opposite of v. v = (5, -5,9) (a) In the direction of v (b) In the direction opposite of v
A unit vector in the direction opposite of v is
[tex]w = (-5/\sqrt{(131)}, 5/\sqrt{(131)}, -9/\sqrt{(131)})[/tex].
To find a unit vector in the direction of v, we first need to calculate the magnitude of v:
[tex]|v| =\sqrt{(5^2 + (-5)^2 + 9^2)}[/tex]
[tex]= \sqrt{(131)[/tex]
Then, to find a unit vector in the direction of v, we divide v by its magnitude:
u = v / |v|
[tex]= (5/\sqrt{(131)}, -5/\sqrt{(131)}, 9/\sqrt{(131)})[/tex]
So a unit vector in the direction of v is
[tex]u = (5/\sqrt{(131)}, -5/\sqrt{(131)}, 9/\sqrt{(131)})[/tex].
To find a unit vector in the direction opposite of v, we simply negate each component of v and then normalize the resulting vector:
w = -v / |(-v)|
[tex]= (-5/\sqrt{(131)}, 5/\sqrt{(131)}, -9/\sqrt{(131)})[/tex]
So a unit vector in the direction opposite of v is
[tex]w = (-5/\sqrt{(131)}, 5/\sqrt{(131)}, -9/\sqrt{(131)})[/tex].
To know more about refer unit vector here
brainly.com/question/30279109#
#SPJ11
This is a 5th-grade science, I'm not good with science but please help me out for my sister to understand this question
Answer:
A, the wheelbarrow with a mass of 45 kg
Explanation:
The heavier the barrel the more force required to move it, so the answer should be A
Consider Figure 3 and read the caption. Sketch this scenario in your lab narrative. Draw a graphical representation for the magnetic field at point P due to the left magnet, label it Bleft. Draw a graphical representation for the magnetic field at point P due to the right magnet, label it Bright. Now draw a graphical representation for the net magnetic field at point P due to the left magnet, label it IB". Describe what you did with the two vectors in words. Watch the Activity 6 Part 1 video and answer the question from there regarding this scenario. Figure 3: Two bar magnets of equal strength, placed next to each other with opposite orientations. What is B at point P, which is exactly halfway between the two magnets?
In this scenario, we have two bar magnets of equal strength placed next to each other with opposite orientations. The question is asking us to determine the magnetic field at point P, which is exactly halfway between the two magnets.
To sketch this scenario in our lab narrative, we can draw two bar magnets with opposite orientations next to each other and label them as the left magnet and the right magnet. We can then draw a point labeled as P exactly halfway between the two magnets.
Next, we can draw a graphical representation for the magnetic field at point P due to the left magnet and label it as Bleft. We can do the same for the right magnet and label it as Bright. To draw the graphical representations, we can use arrows pointing away from the magnets to represent the direction of the magnetic field lines.
To determine the net magnetic field at point P due to the left magnet, we need to add the vectors Bleft and Bright together. To do this, we can place the tail of the Bright vector at the head of the Bleft vector and draw a new vector from the tail of Bleft to the head of Bright. This new vector represents the net magnetic field at point P due to the two magnets and we can label it as IB.
learn more about magnetic field
https://brainly.com/question/14411049
#SPJ11
the second sphere has a charge of 2.0 x 10-9 c. as it is moved closer to the first sphere at a constant speed, the second sphere passes through the circular equipotential lines due to the first sphere. two of these lines are separated by a distance of 0.020 m and have potentials of 100 v and 150 v. what is the magnitude of the average force needed to move the second sphere between the two equipotential lines?
To answer this question, we can use the equation for the electric force between two charges, which is given by.
The work done in moving a charged object between two equipotential lines is equal to the change in potential energy. The average force needed to move the second sphere can be calculated using the formula:
Average force (F) = Work done (W) / Distance (d)
First, let's calculate the work done (W). The change in potential energy is the difference in potential between the two equipotential lines:
Change in potential (ΔV) = 150 V - 100 V = 50 V
Now, using the formula for electric potential energy:
Electric potential energy (PE) = Charge (q) * Potential (V)
where q is the charge of the second sphere and V is the potential, we can calculate the work done:
Work done (W) = Charge (q) * Change in potential (ΔV)
Plugging in the values:
Charge (q) = 2.0 x [tex]10^{-9}[/tex] C
Change in potential (ΔV) = 50 V
W = (2.0 x 10^-9 C) * 50 V = 1.0 x [tex]10^{-7}[/tex] J
Now, let's calculate the distance (d) between the two equipotential lines, which is given as 0.020 m.
Plugging in the values into the formula for average force:
Average force (F) = Work done (W) / Distance (d)
F = (1.0 x [tex]10^{-7}[/tex] J) / 0.020 m = 5.0 x [tex]10^{-6}[/tex] N
So, the magnitude of the average force needed to move the second sphere between the two equipotential lines is 5.0 x[tex]10^{-6}[/tex] N.
To know more about potential energy,
https://brainly.com/question/24284560
#SPJ11
A student of mass 36.1 kg wants to measure the mass of a playground merry-go-round, which consists of a solid metal disk of radius R = 1.50 m that is mounted in a horizontal position on a low-friction axle. She tries an experiment: She runs with speed v = 5.05 m/s toward the outer rim of the merry-go-round and jumps on to the outer rim. The merry-go-round is initially at rest before the student jumps on and rotates at 1.30 rad/s immediately after she jumps on. You may assume that the student’s mass is concentrated at a point.
a) What is the mass of the merry-go-round?
b) If it takes 49.7 s for the merry-go-round to come to a stop after the student has jumped on, what is the absolute value of the average torque due to friction in the axle?
c) How many times does the merry-go-round rotate before it stops, assuming that the torque due to friction is constant?
a) The total angular momentum of the system before the student jumps on is zero (since the merry-go-round is initially at rest and the student is running towards it). After the student jumps on, the total angular momentum of the system is given by:
[tex]L = (I + mR^2)ω[/tex]
where I is the moment of inertia of the merry-go-round, m is the mass of the student, R is the radius of the merry-go-round, and ω is the angular velocity of the merry-go-round after the student jumps on.
Using conservation of angular momentum, we can write:
[tex](0) = (I + mR^2)ω - mvR[/tex]
where v is the speed of the student just before she jumps on.
Solving for I, we get:
[tex]I = mvR / ω - mR^2[/tex]
Substituting the given values, we get:
[tex]I = (36.1 kg)(5.05 m/s)(1.50 m) / (1.30 rad/s) - (36.1 kg)(1.50 m)^2\\I = 54.7 kg·m^2[/tex]
The moment of inertia of a solid disk is given by:
[tex]I = 1/2 MR^2[/tex]
Substituting the given value of R, we get:
[tex]54.7 kg·m^2 = 1/2 M(1.50 m)^2[/tex]
M = 61.1 kg
Therefore, the mass of the merry-go-round is 61.1 kg.
b) The final angular velocity of the merry-go-round is zero, so we can use the equation for rotational kinetic energy to find the work done by friction:
[tex]W = ΔK_rot = 1/2 Iω^2[/tex]
where ΔK_rot is the change in rotational kinetic energy.
Substituting the given values, we get:
[tex]W = 1/2 (54.7 kg·m^2)(1.30 rad/s)^2[/tex]
W = 50.3 J
The work done by friction is equal to the torque due to friction multiplied by the angle through which it acts:
W = τΔθ
Solving for τ, we get:
τ = W / Δθ
Substituting the given value of Δθ (which is equal to 2π since the merry-go-round makes one complete revolution), we get:
τ = 50.3 J / (2π)
τ = 8.01 N·m
Therefore, the absolute value of the average torque due to friction in the axle is 8.01 N·m.
c) The work done by friction is equal to the change in rotational kinetic energy, so we can write:
[tex]W = 1/2 Iω^2 - 1/2 Iω_0^2[/tex]
where ω_0 is the initial angular velocity of the merry-go-round and ω is its angular velocity at any given time.
Using the conservation of angular momentum equation derived in part a, we can write:
[tex]ω = mvR / (I + mR^2)[/tex]
Substituting the given values, we get:
[tex]ω = (36.1 kg)(5.05 m/s) / (54.7 kg·m^2 + (36.1 kg)(1.50 m)^2)[/tex]
ω = 0.609 rad/s
The initial angular velocity of the merry-go-round is 1.30 rad/s, so we can find the time it takes for the merry-go-round to come to a stop using the equation:
[tex]ω = ω_0 - αt[/tex]
where α is the angular acceleration of the merry-go-round and t is the time it takes to come to a stop
To know more about angular momentum refer to-
https://brainly.com/question/29897173
#SPJ11
What is the buoyant force on 5kg solid object with density of 2×10⁴kg/m³ immersed in fluid with 5×10³kg/m³ density?
Buoyancy force can be calculated with the equation
[tex]Fb = Vs × D × g[/tex]
where
Fb = the buoyancy force,Vs = the submerged volume,D = the density of the fluid the object is submerged in,g = the force of gravity.In this case, the weight of the ball is 5 kg and the density of the ball is 2× 10⁴kg/m³
Therefore the volume is given as
[tex]v = \frac{m}{d} = \frac{5}{2 \times 10 {}^{4} kgm {}^{ - 3} } \\ v = \: \frac{5}{20000} m {}^{ - 3} [/tex]
Substituting the given values in the equation, we get,
[tex]Fb=Vs \times D \times g \\ Fb = \frac{5}{20000} m {}^{3} \times 5000kgm {}^{ -3} \\ \times10ms {}^{ - 2} \\ = 12.5N[/tex]
Hence, the force of buoyancy is 12.5N.The electrical resistivity of rubidium, at 273 K, is 11.5×10−8Ωm. Rubidium adopts the body centered cubic structure with a cubic lattice parameter, a0, of 0.5705 nm. The velocity of electrons at the Fermi surface is 8.1×107 m/s. Each rubidium atom contributes one electron to the structure. Calculate the relaxation time, τ, and the mean free path, l, of the electrons. Compare l with the interatomic spacing of rubidium atoms in the crystal.
Comparing the mean free path, l, with the interatomic spacing, d, we find that l is greater than d. This means that the electrons can travel several interatomic distances before colliding with other atoms.
This is expected for metals where the atoms are closely packed and the electrons can move relatively freely through the lattice due to the metallic bonding.
The relaxation time, τ, can be calculated using the formula:
[tex]τ = mvd / (ne^2ρ)[/tex]
where m is the mass of an electron, vd is the drift velocity of the electrons, n is the number density of electrons, e is the charge of an electron, and ρ is the electrical resistivity.
Given:
[tex]m = 9.10938356×10^-31 kg\\vd = 8.1×10^7 m/s\\n = 1 atom/nm^3 = 1.66×10^28 m^-3\\e = 1.60217662×10^-19 C\\ρ = 11.5×10^-8 Ω m[/tex]
Substituting the values, we get:
[tex]τ = 2.45×10^-14 s[/tex]
The mean free path, l, can be calculated using the formula:
l = vd × τ
Substituting the values, we get:
[tex]l = (8.1×10^7 m/s) × (2.45×10^-14 s)\\l = 1.99×10^-6 m[/tex]
The interatomic spacing of rubidium atoms in the body centered cubic structure can be calculated using the formula:
[tex]a0 = 4×(V/n)^(1/3)[/tex]
where V is the volume of the unit cell and n is the number of atoms per unit cell.
Given:
a0 = 0.5705 nm
n = 2 (since each rubidium atom has 8 nearest neighbors)
Substituting the values, we get:
[tex]V = a0^3 / (4/n) = (0.5705×10^-9 m)^3 / (4/2) = 6.938×10^-29 m^3[/tex]
The interatomic spacing, d, is given by:
[tex]d = a0 / (2)^(1/2) = 0.4026 nm = 4.026×10^-10 m[/tex]
To know more about interatomic spacing refer-
https://brainly.com/question/28980878
#SPJ11
An automobile manufacturer is concerned about a possible recall of its best selling four-door sedan. If there were a recall, there is 0.20 probability that a defect is in brake system, 0.22 in the transmission, 0.18 in the fuel system, and 0.40 in some other area.
a) what is the prob. that the defect is in the brakes or the fueling system if the prob. of defects in both system simultaneously is 0.15.
b) what is the prob. taht there are no defects in either the brakes or the fueling system?
The probability that the defect is in the brakes or the fuel system is 0.23. The probability that there are no defects in either the brakes or the fuel system is 0.40.
P(A or B) = P(A) + P(B) - P(A and B)
P(A or B) = 0.20 + 0.18 - 0.15
P(A or B) = 0.23
A fuel system is an essential component of any internal combustion engine, which is responsible for providing fuel to the engine. The primary function of a fuel system is to store, deliver, and supply the appropriate amount of fuel to the engine for optimal performance.
A typical fuel system consists of a fuel tank, fuel pump, fuel filter, fuel injectors, and fuel lines. The fuel tank holds the fuel and is connected to the fuel pump, which draws the fuel from the tank and pumps it through the fuel filter to remove any impurities. The fuel is then delivered to the fuel injectors, which spray a fine mist of fuel into the engine's combustion chamber.
To learn more about Fuel system visit here:
brainly.com/question/24181904
#SPJ4
calculate the ideal efficiency of an engine wherein fuel is heated to 1000 k and the surrounding air is 200 k .
The ideal efficiency of an engine where in fuel is heated to 1000 K and the surrounding air is 200 K is 80%.
To calculate the ideal efficiency of an engine with fuel heated to 1000 K and surrounding air at 200 K, we will use the Carnot efficiency formula. The formula is:
Carnot efficiency = 1 - (Tc/Th)
where Tc is the temperature of the cold reservoir (surrounding air) and Th is the temperature of the hot reservoir (fuel). In this case, Tc = 200 K and Th = 1000 K. Plugging in the values, we get:
Carnot efficiency = 1 - (200/1000)
= 1 - 0.2
= 0.8 or 80%.
Therefore, the ideal efficiency of the engine is 80%.
Learn more about ideal efficiency: https://brainly.com/question/30899903
#SPJ11
accretion is group of answer choices the adding of material to an object an atom or molecule at a time. the adding of material to an object by collection of solid particles. the release of gas from rocks as they are heated. the largest of the galilean satellites. caused by the bombardment of the solar wind
Accretion is a process that involves the adding of material to an object over time. This can occur in a variety of ways, but some of the most common include the adding of material one atom or molecule at a time or the collection of solid particles that gradually build up on the object's surface.
Another possible form of accretion is the release of gas from rocks as they are heated, which can contribute to the growth of an object.
One example of accretion in our solar system is the formation of the largest of the galilean satellites, Jupiter's moon Ganymede. This moon is believed to have formed through the gradual accumulation of material from the surrounding disk of gas and dust that surrounded the young Jupiter. Over time, solid particles collected and stuck together, building up the moon's size and mass.
Accretion can also be influenced by external factors, such as the bombardment of the solar wind. This can cause particles to be stripped away from an object, or it can add additional material to the object's surface, depending on the circumstances.
In short, accretion is a complex process that can occur in a variety of ways, and it plays an important role in the growth and development of objects in our solar system and beyond.
To know more about accretion, refer
https://brainly.com/question/30270913
#SPJ11
a point charge q is located distance r from the center of a neutral metal sphere. the electric field at the center of the sphere is: a) k(q/r^2). b) k(q/R^2). c) k(1/R-r^2). d) 0. e) None of the above.
The electric field at the center of a neutral metal sphere due to a point charge q at distance r is 0. The correct option is d.
When a point charge q is placed at a distance r from the center of a neutral metal sphere, the electric field produced by the charge is canceled out by the induced charges on the surface of the sphere.
As a result, the net electric field at the center of the sphere is zero, which means option d) is the correct answer.
The reason for this is that the electric field produced by the point charge q follows an inverse square law with distance, meaning that it decreases with the square of the distance from the charge.
At the same time, the induced charges on the surface of the sphere create an equal and opposite electric field that cancels out the electric field produced by the point charge at the center of the sphere.
For more such questions on electric , click on:
https://brainly.com/question/26978411
#SPJ11
a common question about lightning power is how long can a lightining strike power a 60w lightbulb if you could all 10 billion jouled of energy from. lightning strike how long voulf it power a light bulb?
Power is the rate at which energy is used or transferred, while energy is the capacity of a system to do work. The unit of power is watts (W), and the unit of energy is joules (J).
A 60W light bulb requires 60 joules of energy per second to function. So, have 10 billion joules of energy from a lightning strike, you can calculate the amount of time it can power the light bulb by dividing the total energy by the energy required per second.
10 billion joules / 60 joules per second = 166,666,666.67 seconds
Therefore, a 60W light bulb can be powered for approximately 166,666,666.67 seconds or about 5.28 years with the energy from a single lightning strike that has a power of 10 billion joules.
However, it's worth noting that lightning strikes can vary in energy and power, so the actual duration of power may differ.
To know more about Power visit:
https://brainly.com/question/29575208
#SPJ11
a bow wave on the surface of water is two-dimensional. what about a shock wave in air?
A shock wave in air is three-dimensional. Unlike a bow wave on the surface of water which only propagates along the surface, a shock wave in air expands in all directions, including up and down, creating a spherical wavefront.
This is because air is a gas and can be compressed and expanded in all directions. This makes the shock wave three-dimensional in nature. A shock wave, often called shockwave, is a sort of disturbance that propagates across a medium faster than the local speed of sound. Similar to a regular wave, a shock wave carries energy and can travel through a medium, but it differs from regular waves in that it causes a sudden, almost discontinuous shift in the medium's pressure, temperature, and density.
More on shock wave: https://brainly.com/question/31054704
#SPJ11
Determine the de broglie wavelength for (a) an electron with kinetic energy of (i) 1.2 ev, (ii) 12 ev, (iii) 120 ev; and for (b) a hydrogen atom with a kinetic energy of 1.2 ev
For electrons:
(i) Kinetic Energy = 1.2 eV: λ ≈ 3.31 × 10⁻¹⁰ m
(ii) Kinetic Energy = 12 eV: λ ≈ 1.04 × 10⁻¹⁰ m
(iii) Kinetic Energy = 120 eV: λ ≈ 3.29 × 10⁻¹¹ m
For hydrogen atom:
(b) KE = 1.2 eV: λ ≈ 6.62 × 10⁻¹¹ m
The de Broglie wavelength for (a) an electron with kinetic energy of (i) 1.2 eV, (ii) 12 eV, (iii) 120 eV; and for (b) a hydrogen atom with a kinetic energy of 1.2 eV can be calculated using the de Broglie equation: λ = h / p, where h is the Planck constant and p is the momentum.
For each case, follow these steps:
1. Convert the kinetic energy (KE) to Joules using the conversion 1 eV = 1.602 × 10⁻¹⁹ J.
2. Calculate the momentum using the equation p = sqrt(2 × m × KE), where m is the mass of the particle.
3. Use the de Broglie equation λ = h / p to find the wavelength.
To know more about de Broglie wavelength click on below link:
https://brainly.com/question/17295250#
#SPJ11
Two stars, both of which behave like ideal blackbodies, radiate the same total energy per second. The cooler one has a surface temperature T and 2.0 times the diameter of the hotter star. What is the temperature of the hotter star in terms of T?
The temperature of the hotter star is √2T.
This can be found using the Stefan-Boltzmann law, which states that the total energy radiated by a blackbody is proportional to its surface area and temperature to the fourth power.
Since the cooler star has 2.0 times the diameter, its surface area is 4.0 times larger than the hotter star. Therefore, to radiate the same amount of energy, the hotter star must have a temperature that is the square root of 2 times greater than the cooler star.
In simpler terms, the hotter star needs to be hotter than the cooler star to compensate for its smaller surface area. The temperature difference between the two stars is related to the ratio of their surface areas, and can be found using the Stefan-Boltzmann law.
To know more about Stefan-Boltzmann law click on below link:
https://brainly.com/question/30763196#
#SPJ11
Cardiorespiratory fitness has nothing to do with heart rate.
O A. True
OB. False
Que
The Statement is False, meanwhile, cardiorespiratory fitness has everything to do with heart rate.
What is cardiorespiratory fitness?The ability of the circulatory and respiratory systems to provide oxygen to skeletal muscles during persistent physical activity is referred to as cardiorespiratory fitness.
CRF is used by scientists and researchers to evaluate the functional capacity of the respiratory and cardiovascular systems.
High-intensity aerobic exercises such as swimming, running, cycling, and jumping rope are examples of cardiorespiratory endurance activities.
Learn more about cardiorespiratory fitness here:
https://brainly.com/question/1902442
#SPJ1
A current of 4 A flows in a copper wire 10mm in diameter. The density of valence electrons in copper is roughly 9 × 10^28 m^−3 .Find the drift speed of these electrons. The fundamental charge is 1.602 × 10−19 C
The drift speed of valence electrons in a copper wire with a current of 4 A and a diameter of 10 mm is approximately 5.89 × 10⁻⁴ m/s.
The drift speed of electrons in a conducting wire can be calculated using the formula:
v_d = I / (n * A * e)
where:
v_d is the drift speed of electrons,
I is the current in the wire,
n is the number density of charge carriers (in this case, valence electrons) in the material,
A is the cross-sectional area of the wire, and
e is the charge of a single electron, equal to 1.602 × 10⁻¹⁹ C.
Given that the current I is 4 A, the diameter of the wire is 10 mm (or 10 × 10⁻³ m, which gives a radius of 5 × 10⁻³ m), and the number density of valence electrons in copper is 9 × 10²⁸ m⁻³, we can calculate the drift speed using the given formula. Note that the cross-sectional area A can be calculated using the formula A = π * r², where r is the radius of the wire.
Substituting the given values into the formula, we get:
v_d = 4 / (9 × 10²⁸ * π * (5 × 10⁻³)² * 1.602 × 10⁻¹⁹)
v_d ≈ 5.89 × 10⁻⁴ m/s
Therefore, the drift speed of valence electrons in the copper wire is approximately 5.89 × 10⁻⁴ m/s.
To know more about conducting wire refer here:
https://brainly.com/question/10675719#
#SPJ11
Calculate (in MeV) the total binding energy and the binding energy per nucleon (a) for 3H and (b) for 3He
The binding energy per nucleon is 5.544 MeV / 3 nucleons = 1.848 MeV/nucleon.
(a) For 3H (tritium):
The atomic mass of 3H is 3.016049 u.
The mass of three individual protons is 3.02184 u, and the mass of a single neutron and two protons is 3.01689 u.
The difference in mass between these two configurations is 0.00595 u.
The total binding energy is (0.00595 u)(931.5 MeV/c^2/u) = 5.544 MeV.
The binding energy is 5.544 MeV / 3 nucleons = 1.848 MeV/nucleon.
(b) For 3He (helium-3):
The atomic mass of 3He is 3.016029 u.
The mass of two individual protons and a single neutron is 3.01688 u.
The difference in mass between these two configurations is 0.000851 u.
The total binding energy is (0.000851 u)(931.5 MeV/c^2/u) = 0.795 MeV.
The binding energy per nucleon is 0.795 MeV / 3 nucleons = 0.265 MeV/nucleon.
To learn more about neutron, refer below:
https://brainly.com/question/29771588
#SPJ11