Answer:
average speed = 1.73m/s
average velocity = 3.33m/s
Explanation:
we'll find the average speed first
average speed = total distance / total time
his total distance is 300m + 100m
= 400m
and total time should be taken in seconds as you know
((2×60)+50) + 60s
= 230s
so let's divide,
400m/230s
1.73 m/s
next, mean velocity
that is,
mean velocity = final- initial displacement/time
we have to note displacement ( this is the distance between the initial point to final point) here
the displacement is 300-100
so, 200m
we already calculated total time
but that cant be taken here
230 - 170
is the original time to travel 200m
that is, 60s
so we divide
200/60
3.33m/s
Which of the following scientists proposed the theories of relativity?
A. Galileo Galilei
B. Johannes Kepler
C. Albert Einstein
D. Sir Isaac Newton
Answer:
c) Albert Einstein,
Explanation:
in his theory of special relativity, determined that the laws of physics are the same for all non-accelerating observers, and he showed that the speed of light within a vacuum is the same no matter the speed at which an observer travels.
hope this helped
-lvr
why is string a good force measurer?
Answer:
tension is how much force is being exerted on each end of the string, whereas length is how long the string is. So assuming that the string has finite mass, then the tension on the string should increase proportionally to the string according to Newton's law f=ma.
Explanation:
a skydiver jumped out of a plane and fell 9 miles to the ground. his average speed while falling was 174 miles/hour. how much time did the dive last?
Answer:
t = 0.051 seconds
Explanation:
Given that,
A skydiver jumped out of a plane and fell 9 miles to the ground. It means 9 miles is the distance covered.
The average speed of the skydiver is 174 miles/hour
We need to find the time for which he dive last. It means t is the time taken. Total distance covered divided by time taken is called average speed. So,
[tex]v=\dfrac{d}{t}\\\\t=\dfrac{d}{v}\\\\t=\dfrac{9}{174}\\\\t=0.051\ s[/tex]
So, a skydiver dive for 0.051 seconds.
2x+4y
GCF for the polynomial
Answer:
[tex]\boxed{2}[/tex]
Explanation:
The GCF is the greatest common factor of the polynomial.
[tex]2x = 1, \ 2, \ x[/tex]
[tex]4y=1, \ 2, \ 4,\ y[/tex]
The greatest common factor is 2.
To a stationary observer, a bus moves south with a speed of 12 m/s. A man
inside walks toward the back of the bus with a speed of 0.5 m/s relative to
the bus. What is the velocity of the man according to a stationary observer?
A. 11 m/s south
B. 12.5 m/s south
C. 11.5 m/s south
D. 0.5 m/s south
ANSWER
C 11.5 m/s
EXPLANATION
Answer:
11.5m/s south
Explanation:
Online classes
Bumper car A (281 kg) moving +2.82 m/s makes an elastic collision with bumper car B (209 kg) moving +1.72 m/s. What is the velocity of car A after the collision? Would greatly appreciate the actual answer!
Answer:
Hello There. ☆~\《--_^■^_--》\~☆ The final velocity of the car A is -1.053 m/s. For an elastic collision both the kinetic energy and the momentum of the system are conserved.
Hope It Helps!~ ♡
ItsNobody~ ☆
Given:
[tex]M_A = 281 \ kg \\\\ v_A= 2.82 \frac{m}{s}\\\\M_B = 209 \ kg \\\\ V_B = 1.72 \frac{m}{s}[/tex]
To find:
velocity=?
Solution:
Using the formula for the velocity of CAR after the collision:
[tex]\to V_A = \frac{V_A(M_A -M_B) +2 M_B V_B}{M_A+M_B}\\\\[/tex]
[tex]= \frac{2.82(281 - 209) +2 \times 209 \times 1. 72}{ 281+ 209}\\\\ = \frac{2.82(72) +718.96}{490}\\\\= \frac{203.04 +718.96}{490}\\\\= \frac{922.00}{490}\\\\= \frac{922}{490}\\\\=1.881 \ \frac{m}{s}[/tex]
Therefore, the answer is "[tex]\bold{1.881\ \frac{m}{s}}[/tex]"
Learn more about the velocity:
brainly.com/question/24376522
A scientist wants to measure the relationship between humidity in the
summer and the number of home runs in baseball. Which of the following is a
testable question about this topic?
A. Are home runs more exciting during the summer?
O B. Should fans like the players who hit the most home runs?
O C. Are home runs more fun to watch than normal hits?
D. Are there more home runs during the more humid months of the
summer?
Answer:
D
Explanation:
The most suitable testable question. in this case, would be that 'are there more home runs during the more humid months of the summer?'
Since the aim of the investigation is to find the relationship between humidity and the number of home runs, measuring the number of home runs during the more humid months in the summer and comparing the data to the number of home runs during the less humid months in the same summer would provide the answer.
Only option D raises a valid question that is relevant to the aim of the investigation.
Which is one piece of evidence of seafloor spreading?
a. fossil material
b. continent material
c. drilled core samples
d. ocean water samples
Answer:
A. Continent material
Explanation:
Eruptions of molten material, which results in continent material is a piece of evidence of seafloor spreading.
Continent material is one piece of evidence of seafloor spreading. Option b is correct.
What is seafloor spreading?Seafloor spread is a phenomenon that happens along mid-ocean ridges, when new oceanic crust is generated by volcanic activity and then progressively travels away from the ridge.
The geological activity of seafloor spreading occurs when tectonic plates split apart.
Continent material is one piece of evidence of seafloor spreading.
Hence, option b is correct.
To learn more about the seafloor spreading, refer to the link;
https://brainly.com/question/15122129
#SPJ2
Is the following nuclear reaction balanced?
Answer:
yes
Explanation:
Salt compounds are commonly used to melt ice that forms on sidewalks in the winter. A common chemical that is used to melt sidewalk ice is calcium chloride, CaCl2(s). When calcium chloride dissolves into solution is releases thermal energy which aides in melting
the ice.
The molar mass of water is 18.02 g/mol
The thermal energy, in kilojoules (kJ) that must be released from the calcium chloride,
CaCl2(s), to melt 10.0 kg of ice, expressed in scientific notation is a.bc x 104 k).
46
55
The values of a, b, c, and d.
Answer:
The values of a, b, c and d are
a = 3, b = 3, c = 4 and d = 3
Explanation:
The quantity of heat needed to melt the ice is given by Q = mL where m = mass of ice and L = latent heat of fusion of ice = 334 kJ/kg. This quanity of heat is also the thermal energy needed to be released by the calcium chloride, CaCl₂
Now, the mass of ice = 10 kg. So,
Q = mL
Q = 10 kg × 334 kJ/kg
Q = 3340 kJ
In scientific notation,
Q = 3.34 × 10³ kJ
So the thermal energy needed to be released by the calcium chloride is 3.34 × 10³ kJ
Comparing Q = 3.34 × 10³ kJ with a.bc × [tex]10^{d}[/tex] kJ
So, a = 3, b = 3, c = 4 and d = 3
The values of a, b, c and d are
a = 3, b = 3, c = 4 and d = 3
A light bulb lights up with a potential difference of 120 V and a current of 1.5 A. What is the energy consumption of the light bulb?
Power consumption = (voltage) x (current)
Power = (120 V) x (1.5 A)
Power = 180 watts
But 1 watt = 1 Joule/second
180 watts = 180 Joule/second
Energy consumption of the light bulb =
(180) x (number of seconds it's turned on) Joules
Observing neutrinos from the Sun is an important way to check the fusion rate, but it can be very tough to build a machine that can detect these particles. What trouble did the most recent experiment, Borexino, have to overcome
Answer:
The trouble that the most recent experiment, Borexino, have to overcome was that
neutrinos hardly interact with matter and so radioactive decay of ant material inside the detector could look exactly like a neutrino interaction too
Light travels 300 000 000 m/s and one year has approximately 32 000 000 second a light year is the distance light travels in one year
Explanation:
It is given that,
Speed of light, [tex]v=300 000 000\ m/s=3\times 10^8\ m/s[/tex]
Seconds in 1 year, [tex]t=32 000 000=32\times 10^6\ s[/tex]
We need to find the distance traveled by light in one year. Speed of an object is given by :
[tex]v=\dfrac{d}{t}[/tex]
So,
[tex]d=v\times t\\\\d=3\times 10^8\times 32\times 10^6\\\\d=9.6\times 10^{15}\ m[/tex]
Since,
[tex]1\ \text{light year}=9.46\times 10^{15}\ m\\\\1\ m=\dfrac{1}{9.46\times 10^{15}}\ \text{ly}\\\\9.6\times 10^{15}\ m=\dfrac{9.6\times 10^{15}}{9.46\times 10^{15}}\\\\d=1.01\ \text{ly}[/tex]
So, the distance covered by light is 1.01 light years.
A ball is launched from the ground with a horizontal speed of 30 m/s and a vertical speed of 30 m/s. What far vertically will it travel before hiting the ground A. 40 m B. 30 m C. 60 m D. 50 m
Answer:
First, let's think in the vertical problem:
The acceleration will be the gravitational acceleration:
g = 9.8 m/s^2
a = -9.8 m/s^2
For the velocity, we integrate over time:
v(t) = (-9.8 m/s^2)*t + v0
Where v0 is the initial velocity, in this case v0 = 30m/s.
v(t) = (-9.8 m/s^2)*t + 30m/s
Now, for the position we integrate again over time, and get:
P(t) = (1/2)*(-9.8 m/s^2)*t^2 + 30m/s*t + p0
Where p0 is the initial position, as the ball is launched from the ground, we can use p0 = 0m
p(t) = (-4.9m/s^2)*t^2 + 30m/s*t
Now, the maximum vertical height is reached when:
v(t) = 0m/s = -9.8m/s^2*t + 30m/s
t = 30m/s/9.8m/s^2 = 3.06s
Now we can evaluate the vertical position in t = 3.06s
p(3.06s) = (-4.9m/s^2)*(3.06)^2 + 30m/s*3.06 = 62m
So, rounding down, the correct option is: C. 60 m
In a normal use bicycle, the angular speed of the minor gear has been found to be 25 rad / s. Find the angular speed of the larger gear, knowing that the small gear has a diameter of 4 R and the large gear 10 R.
Answer:
10 rad/s
Explanation:
The gears have the same linear speed.
ω₁ r₁ = ω₂ r₂
(25 rad/s) (2R) = ω (5R)
ω = 10 rad/s
Y=5sin (3x -4t)
Cdculate the wavelength frequency and period.
Pls answer and explanation with formula
explanation
the general form of wave equation is
y=Asin(kx-wt)
we have
y=5sin(3x-4t)
hence the angular frequency
w= 4s^-1
the frequency
f=w/2 pi
f=4/2 pi
f=4/2*3.14
f=0.64 hz
the period
T=1/f
T=1/0.64
T=1.5625=1.6
the wavelength
k=2 pi/lambda
lambda=2 pi/k
k=3
so
lambda=2*3.14/3
lambda=2.09
if my answer is right then mark me brainlist
A hollow circular shaft made of 304 stainless steel uniformly tapers from an outer diameter of 3.0 cm to an outer diameter of 4.0 cm over a length of 2 meters. The inner diameter of 1.0 cm is constant over the length of the shaft. The shaft is subjected to an applied torque of 500 Nm. Determine the maximum shear stress in the shaft.
Answer:
maximum shear stress = τ(max) = 95.49 × 10⁶N/m²
Explanation:
given
outer diameter at one end(D₁) = 3.0cm
outer diameter at the other end(D₂) = 4.0cm
inner diameter(d₁) = 1.0cm
torque applied(T) = 500Nm
maximum shear stress will occur at lower outer diameter
the formula is τ/r = T/J
τ= T × r/J
where r is radius
T is the torque
J is the polar 2nd M of area
attached is the calculation of the question
This is a question on my physics test :)
Can any1 help me? if you can, please give an explanation
Answer:
119.6 J/Kg°C
Explanation:
Data obtained from the question include:
Mass of substance (ms) = 170 g
Initial temperature of substance (Ts) = 120 °C
Volume of water = 200 mL
Initial temperature of water (Ts) = 10 °C
Temperature of the mixture (T2) = 12.6 °C
Density of water = 1 g/mL
Specific heat capacity of water (Cw) = 4200J/Kg°C
Specific heat capacity of substance (Cs) =..?
Next, we shall determine the mass of water. This can be obtained as follow:
Volume of water = 200 mL
Density of water = 1 g/mL
Mass of water =..?
Density = mass /volume
1 = mass /200
Cross multiply
Mass of water = 1 x 200
Mass of water = 200 g
Convert 200 g of water to Kg
Mass of water = 200/1000 0.2 Kg
Mass of water = 0.2 Kg
Now, we obtained the specific heat capacity of the substance using the following formula:
MwCw(T2 – Tw) + MsCs(T2 – Ts) = 0
Mass of water = 0.2 Kg
Initial temperature of water (Ts) = 10 °C
Specific heat capacity of water (Cw) = 4200J/Kg°C
Temperature of the mixture (T2) = 12.6 °C
Mass of substance (ms) = 170 g = 170/1000 = 0.17 Kg
Initial temperature of substance (Ts) = 120 °C
Specific heat capacity of substance (Cs) =..?
MwCw(T2 – Tw) + MsCs(T2 – Ts) = 0
0.2× 4200(12.6 – 10) + 0.17×Cs×(12.6 – 120) = 0
840(2.6) + 0.17Cs(– 107.4) = 0
2184 – 18.258Cs = 0
Rearrange
2184 = 18.258Cs
Divide both side by the coefficient of Cs i.e 18258
Cs = 2184/18.258
Cs = 119.6 J/Kg°C
Therefore, the specific heat capacity of the substance is 119.6 J/Kg°C
sliding friction is _ than the static friction.
Answer:
less
Explanation:
Sliding friction is always less than static friction. This is because in sliding friction, the bodies slide with each other and thus the effect of friction is not more. However, it does not happen in the case of static friction.
What height will the object reach? 12 points. Will give brainliest.
Answer:
12.7 m
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 56.7 Km/hr
Maximum height (h) =..?
First, we shall convert 56.7 Km/hr to m/s. This can be obtained as follow:
Initial velocity (m/s) = 56.7 x 1000/3600
Initial velocity (m/s) = 15.75 m/s
Next, we shall determine the time taken to get to the maximum height. This can be obtained as follow:
Initial velocity (u) = 15.75 m/s
Final velocity (v) = 0 m/s
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) =?
v = u – gt (since the ball is going against gravity)
0 = 15.75 – 9.8 × t
Rearrange
9.8 × t = 15.75
Divide both side by 9.8
t = 15.75/9.8
t = 1.61 secs.
Finally, we shall determine the maximum height as follow
h = ½gt²
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) = 1.61 secs.
Height (h) =..?
h = ½gt²
h = ½ × 9.8 × 1.61²
h = 4.9 x 1.61²
h = 12.7 m
Therefore, the maximum height reached by the ball is 12.7 m
How does increasing frequency affect the crests of a wave?
They get higher.
They get closer together.
They get lower.
They get farther apart.
Answer:
they get closer together
Explanation:
how can i solve density
Answer:
p=m÷v
Explanation:
that is the formula for it. now, using your numbers p=density,m=mass and v= volume. you just divide it.
after you measurement would be in cm/3
Answer:
You can simply find density by using formula
[tex]d = \frac{m}{v} [/tex]
where m represents mass of an object and v represents volume of an object.
hope it helps..
Click this link to view O*NET Skills section for Electrical Engineers. Note that common skills are listed toward the top and less common skills are listed toward the bottom. According to O*NET, what are some common skills Electrical Engineers need?
Explanation:
O*NET stands for Occupational Network and it is an online platform for job seekers around the world who are searching for jobs. This platforms provides the job information along with the required qualities, education background, skill sets, etc.
The most common skill sets that are required for an electrical engineers are
1. Analytical skills
2. Monitoring and active learning
3. Decision making
4. Able to manage the personal resources
5. Time management.
6. Should have knowledge about different software.
The volume V of a cube with sides of length x in. is changing with respect to time. At a certain instant of time, the sides of the cube are 7 in. long and increasing at the rate of 0.3 in./s. How fast is the volume of the cube changing (in cu in/s) at that instant of time
Answer:
my big long peen for ur mom
Explanation:
Please help! Will give brainliest. 10 points. Show work!
Answer:
421.83 m.
Explanation:
The following data were obtained from the question:
Height (h) = 396.9 m
Initial velocity (u) = 46.87 m/s
Horizontal distance (s) =...?
First, we shall determine the time taken for the ball to get to the ground.
This can be calculated by doing the following:
t = √(2h/g)
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) = 396.9 m
Time (t) =.?
t = √(2h/g)
t = √(2 x 396.9 / 9.8)
t = √81
t = 9 secs.
Therefore, it took 9 secs fir the ball to get to the ground.
Finally, we shall determine the horizontal distance travelled by the ball as illustrated below:
Time (t) = 9 secs.
Initial velocity (u) = 46.87 m/s
Horizontal distance (s) =...?
s = ut
s = 46.87 x 9
s = 421.83 m
Therefore, the horizontal distance travelled by the ball is 421.83 m
A diver releases an air bubble of volume 3.0 cm3 from a depth of 18 m below the surface of a lake, where the temperature is 9.0 ∘C. Part A What is the volume of the bubble when it reaches just below the surface of the lake, where the temperature is 22 ∘C?
Answer:
Explanation:
We shall apply gas law formula to get the solution .
P₁ V₁ / T₁ = P₂ V₂ / T₂
P₁ = 10⁵ + 18 x 10³ x 9.8 where 10⁵ Pa is atmospheric pressure at surface
= 1.764 x 10⁵ + 10⁵
= 2.764 x 10⁵
2.764 x 10⁵ x 3 / ( 273 + 9 ) = 10⁵ x V₂ / ( 273 + 22 )
V₂ = 8.67 cm³
There is a Full Moon on September 14th. On which date will the New Moon occur? A.September 21st B.September 28th C.13th D.October 31st
Answer:
the answer B
Explanation:
A rocket is launched vertically from the ground with an initial velocity of 64. Write a quadratic function that shows the height, in feet, of the rocket t seconds after it was launched.
Answer:
y = 64t − 16t²
Explanation:
y = y₀ + v₀ t + ½ at²
y = 0 + 64 t + ½ (-32) t²
y = 64t − 16t²
Which egg floated higher? Why do you think that happened?
Answer:
Generally, fresh eggs will lie on the bottom of the bowl of water. Eggs that tilt so that the large end is up are older, and eggs that float are rotten.
Explanation:
Why does fire has not any shadow?