The water tank is kept at some height of the buildings. Why?​

Answers

Answer 1

Answer:

The water is at the top because when the water is stored at the top it does not need as much energy to get it to flow because it will be flowing down and be affected by gravity to make the water pressure.

Answer 2

Answer:

The water is at the top because when the water is stored at the top it does not need as much energy to get it to flow because it will be flowing down and be affected by gravity to make the water pressure.

Explanation:


Related Questions

What is the wavelength of the following waves?

Answers

Answer:

i. the wavelength is 7.2 m

ii. the wavelength is 2.4 m

Explanation:

the wavelength of a wave is from crest to crest or from trough to trough.

Signal propagation in the nervous system can be modeled as

a) A resistor network.

b) A wave of electricity that travels down conducting tissue.

c) A series of RC circuits.

Answers

Answer:

c) A series of RC circuits.

Two men, Joel and Jerry, each pushes an object that are identical on a horizontal frictionless floor starting from rest. Joel and Jerry are using the same force F. Jerry stops after 10 min, while Joel is able to push for 5.0 min longer. Compare the work they do.

Answers

Answer:

The work done by Joel is greater than the work done by Jerry.

Explanation:

Let suppose that forces are parallel or antiparallel to the direction of motion. Given that Joel and Jerry exert constant forces on the object, the definition of work can be simplified as:

[tex]W = F\cdot \Delta s[/tex]

Where:

[tex]W[/tex] - Work, measured in joules.

[tex]F[/tex] - Force exerted on the object, measured in newtons.

[tex]\Delta s[/tex] - Travelled distance by the object, measured in meters.

During the first 10 minutes, the net work exerted on the object is zero. That is:

[tex]W_{net} = W_{Joel} - W_{Jerry}[/tex]

[tex]W_{net} = F\cdot \Delta s - F\cdot \Delta s[/tex]

[tex]W_{net} = (F-F)\cdot \Delta s[/tex]

[tex]W_{net} = 0\cdot \Delta s[/tex]

[tex]W_{net} = 0\,J[/tex]

In exchange, the net work in the next 5 minutes is the work done by Joel on the object:

[tex]W_{net} = W_{Joel}[/tex]

[tex]W_{net} = F\cdot \Delta s[/tex]

Hence, the work done by Joel is greater than the work done by Jerry.

Please help asap. A soccer player can kick a 0.370 kg football at 55 km/h. How much work does the soccer player have to do on the ball in order to give it that much kinetic energy?

Answers

Answer: 43.2 J

Explanation:

Work = change in KE

initial KE = 0

final KE = 1/2mv^2 = 1/2(0.370 kg)(15.2778 m/s)^2 = 43.2 J

i'm not sure about sig figs though

In a given chemical reaction the time energy of the products is less than the energy of the reactants which statements is true for this chemical reaction

Answers

Answer:

Energy is released in this reaction possibly in the form of heat thus it is an exergonic and or exothermic reaction.

Explanation:

The energy is sometimes transferred as heat, inflicting the reaction mixture and its surroundings to become hotter. The temperature increase may be detected employing a measuring device. Some samples of exothermic reactions are: Combustion .An chemical reaction may be a chemical process that releases energy by lightweight or heat

Hope this helps...

Have a nice day!!!!

2. When backing straight or to the right: a. Position your right hand on the back of the passenger seat. b. Grip the steering wheel at the 12 o’clock position with your left hand. c. Move the wheel left or right in the direction in which you want the rear of the vehicle to go. d. All of the above

Answers

Answer:

Option d = all of the above.

Explanation:

This question is more of a driving lesson or tutorial Question and not that scientific, it is logical and the "rule" attached to reversing and driving that is operating of vehicles especially cars, trucks and so on.

All the options given in the Question from option 'a' to option 'c' are all correct when driving backwards that is reversing or backing . Driving backward(backing or reversing) is not as easy as during forward (drive mode).

=> " Position your right hand on the back of the passenger seat. Grip the steering wheel at the 12 o’clock position with your left hand"

REASON: FOR BALANCING.

=> " Move the wheel left or right in the direction in which you want the rear of the vehicle to go."

The above, given in the Question are all correct.

When backing straight or to the right, all of the mentioned options are correct and recommended practices are to Position your right hand on the back of the passenger seat. The correct option is option d.

a) Position your right hand on the back of the passenger seat: This is a technique used by some drivers to help them have a better sense of the vehicle's position and reference point while backing up.

b) Grip the steering wheel at the 12 o'clock position with your left hand: This hand position allows for better control and maneuverability of the steering wheel while backing up.

c) Move the wheel left or right in the direction in which you want the rear of the vehicle to go: This is the fundamental principle of steering while backing up. By turning the wheel in the desired direction, you can guide the rear of the vehicle in that direction.

Therefore, These practices can assist in improving control, visibility, and maneuverability while backing up, ensuring a safer and more effective backing maneuver. The correct option is option d.

To know more about the principle of steering:

https://brainly.com/question/29458022

#SPJ6

Two small, identical conducting spheres repel each other with a force of 0.035 N when they are 0.35 m apart. After a conducting wire is connected between the spheres and then removed, they repel each other with a force of 0.055 N. What is the original charge on each sphere? (Enter the magnitudes in C.)

Answers

Explanation:

Given:

distance between two sphere =0.35 m

Electrical repel force =0.035 N

Electrical repel force after connecting wire =0.055 N.

The electrical force between the two spheres:

[tex]F=k \frac{q_{1} q_{2}}{r^{2}}[/tex]

The electrical force between the two spheres after the wire is attached and removed:

[tex]F=k \frac{q^{2}}{r^{2}}[/tex]

[tex]q^{2}=\frac{F r^{2}}{k}[/tex]

[tex]q=r \sqrt{\frac{F}{k}}=0.35 \times \sqrt{\frac{0.055}{8.99 \times 10^{9}}}=6.46 \times 10^{-7} \mathrm{C}[/tex]

So the total charge of the two spheres [tex]=2 q=2 \times 6.46 \times 10^{-7}=1.29 \times 10^{-6} \mathrm{C}[/tex]

Then before connecting the wire, one sphere charge was [tex]q[tex] and the charge of the other sphere was [tex]\left(1.29 \times 10^{-6}-q\right)[/tex]

The electrical force between the two spheres before connecting the wire:

[tex]F=k \frac{q\left(1.29 \times 10^{-6}-q\right)}{r^{2}}[/tex]

[tex]q\left(1.29 \times 10^{-6}-q\right)=\frac{F r^{2}}{k}=\frac{0.035 \times(0.35)^{2}}{8.99 \times 10^{9}}=0.348 \times 10^{-12}[/tex]

[tex]-q^{2}+\left(1.29 \times 10^{-6}\right) q-\left(0.348 \times 10^{-12}\right)=0[/tex]

[tex]-q^{2}+\left(1.29 \times 10^{-6}\right) q-\left(0.348 \times 10^{-12}\right)=0[/tex]

calculate the energy dissipated by an electric iron which draws a current of 5A from a240v power supply for 25minutes​

Answers

Explanation:

Given,

I = 5 A

V = 240 V

T = 25 mins = 1500 sec

Now,

Energy dissipated = IVT= 5×240×1500 = 1800000 J

Ratan took a thin, solid piece of material. When he put it in water, it rose and floated. He took it out of the water and cut out holes in it as shown below. When Ratan puts the material with holes back in the water, what will happen?

Answers

Answer:

The material will still remain afloat.

Explanation:

The fact that the material floated on water as a solid piece means that the material is less dense than water. When a material is less dense than another liquid material, the material floats in the denser material. Cutting holes in the material will not reduce the buoyancy of the material. If the material had not floated as a single solid piece, then it will be said to be denser than the liquid material, and in such a case, if a strategic hole is cut on it to reduce its weight while maintaining its immediate volume, then it can be made to float. This is the principle behind metal floating ships.

1. Chanice drives her scooter 7 kilometres north. She stops for lunch and then drives 5 kilometres east. What distance did she cover? What was her displacement?

Answers

Answer:

i. Distance covered is 12 kilometres.

ii. Her displacement is 8.6 kilometres.

Explanation:

Distance is a span of length between two points, while displacement is the distance moved in a specified direction. Distance is a scalar quantity, while displacement is a vector.

She drives 7 kilometres north, then 5 kilometres east later.

i. Distance covered = 5 + 7

                                 = 12

Her distance covered is 12 kilometres.

ii. To determine her displacement, apply the Pythagoras rule to the sketch of her journey.

[tex]x^{2}[/tex] = [tex]5^{2}[/tex] + [tex]7^{2}[/tex]

   = 25 + 49

   = 74

x = [tex]\sqrt{74}[/tex]

  = 8.6023

Thus, her displacement is 8.6 kilometres.

1. The electric field strength between two parallel plates separated by 6.00 cm is 7.50 × 104 V/m . (a) What is the potential difference between the plates? (b) The plate with the lowest potential is taken to be zero volts. What is the potential 1.00 cm from that plate and 6.00 cm from the other?

Answers

Answer:

a)4500V

b)750V

Explanation:

Given:

Distance between the plate=

6.00 cm

We need to convert to m

Then the Distance between the plate=

0.06m

electric field strength between two parallel plates =

7.50 × 104 V/m .

Then E= 7.50 × 104 V/m .

(a) What is the potential difference between the plates?

potential difference between the plates can be calculated using the formula below

Δ Vab=ED

Where E is the given electric field strength

D= The Distance between the plate

ΔVab=7.50 × 10⁴V/m ×

0.06m

= 4500V

(b) The plate with the lowest potential is taken to be zero volts. What is the potential 1.00 cm from that plate and 6.00 cm from the other?

the potential 1cm from the zero volt plate

Then the 1cm must be converted to m

= 0.01m

Let us say plate A as the plate at 0 volts:

The potential increases linearly going from plate A (0 V) to plate B (4500V).

Therefore,if the potential difference between A and B, separated by 6 cm, is 4500 V, then the potential difference between A and a point located at 1 cm from A is can be calculated also

If the plate with Lowest potential is taken to be zero then

=ΔVab=Vab-Vb=Va-0=Va=ED

Va=7.50 × 10⁴V/m × 0.01=750V

How much work is done when 0.0042 C is moved through a potential difference of 12.0 V? Use W = qV A. 0.050 J B. 0.00035 J C. 2900 J D. 12 J

Answers

Answer:

Work done by charge (W) = 0.050 (Approx)

Explanation:

Given:

Charge (q) = 0.0042 C

Potential difference(V) = 12.0 V

Find:

Work done by charge

Computation:

Work done(W) = qV

Work done by charge (W) = (0.0042)(12)

Work done by charge (W) = 0.0504

Work done by charge (W) = 0.050 (Approx)

Answer:

Work done by charge (W) = 0.050 (Approx)

Explanation:

Charge (q) = 0.0042 C

Potential difference(V) = 12.0 V

Find:

Work done by charge

Computation:

Work done(W) = qV

Work done by charge (W) = (0.0042)(12)

Work done by charge (W) = 0.0504

Work done by charge (W) = 0.050 (Approx)

Which statement describes dynamic equilibrium? A. The forces on an object in motion are balanced. B. An object is accelerating due to forces acting on it. C. The forces on an object are unbalanced. D. The forces on a stationary object are balanced.

Answers

Answer: A. The forces on an object in motion are balanced.

Explanation:

The dynamic equilibrium is defined as the phase when an object moves at a constant velocity such that all forces on the object are balanced.

Simple case of dynamic equilibrium: A horizontal force is applied to an object making it run with a constant velocity across a surface.

Hence, the statement describes dynamic equilibrium is " The forces on an object in motion are balanced. "

So, the correct option is "A".

Answer:

Hope this helps!

A piano has a mass of 99 kg. What is the weight of the piano?
A. 1030 N
B. 842 N
C. 1129 N
D. 970 N
Help!!

Answers

Answer:

[tex]D.\ 970\ N[/tex]

Explanation:

Given:

Mass of Piano: 99kg

Required:

Calculate its weight

The weight of an object is calculate as thus;

[tex]Weight = Mass\ (m) * Acceleration\ due\ to\ gravity\ (g)[/tex]

[tex]m = 99kg[/tex] and [tex]g = 9.8m/s^2[/tex]

The formula becomes

[tex]Weight = 99kg * 9.8m/s^2[/tex]

[tex]Weight = 970.2\ kgm/s^2[/tex]

[tex]Weight = 970.2\ N[/tex]

[tex]Weight = 970\ N[/tex] Approximated

Hence, the weight of the piano is 970N

How will you connect 3 cells each of value 2V to give a total of 3V * Two in parallel with one in series Two in series with one in parallel All in parallel All in series

Answers

Answer:

two of them in series with one in parallel

Explanation:

When two or more batteries are connected in

(a) series: the total voltage produced is equal to the sum of the voltages on each of the batteries. For example, if two batteries A and B of 3V and 2V respectively are connected in series, then the total voltage produced is

3V + 2V = 5V

(b) parallel: the total voltage produced is equal to the voltage on any one of the batteries. As a mention, only batteries of the same voltage should be connected together in parallel. For example, if two batteries A and B each of 4V are connected together in parallel, then the total voltage produced is 4V.

If these batteries are not of the same voltage, then the one of larger voltage will charge the one of the lower voltage until they both have the same voltage. That means that their eventual voltage will be the average of their voltages. For example, if two batteries A and B of 3V and 2V respectively, are connected in parallel, their total voltage will be,

(3V + 2V) / 2 =2.5V

Now, from the question.

Since there are three cells each of value 2V.

=>If we connect two of them in series, the total voltage from those two cells will be 2V + 2V = 4V

=>If we then connect this series connection in parallel with the third cell, then we have a parallel combination of 4V and 2V. Since they have different voltages, then the total voltage will be the average of the two voltages. i.e

(4V + 2V) / 2 = 6 / 2 = 3V

Therefore, to have a total of 3V from three cells each of 2V, we need to connect two of them in series with one in parallel

A mass of 1.15 kg of air at 111 kPa and 27 C is contained in a gas-tight, frictionless piston cylinder device. The air is now compressed to a final pressure of 0.84 MPa. During this process, heat is transferred from the air such that the temperature inside the cylinder remains constant. Calculate the work input (in kJ) during this process.

Answers

Answer:

Work input W = -200.39 KJ

Explanation:

From the question, we are given;

m = 1.15 kg

Constant temperature T1 = T2 = 27 + 273 = 300k

Since the temperature is constant, we can say that the process is isothermal

P1 = 111 KPa

P2 = 0.84 MPa = 0.84 * 1000 KPa = 840 KPa

Now what we want to calculate is W1-2

Mathematically, for isothermal process;

W1-2 = mRTlnP1/P2

where R can be obtained from table and it is equal to 0.287 KJ/kg.k

Hence;

W1-2 = (1.15)(0.287)(300)(ln 111/840)

W1-2 = 99.015 * -2.023871690525 = -200.39 KJ

Kindly note that the value of the work is negative because work is done on the system and not by the system

Fill in the blanks in the following statements:
1. A parsec is defined as the distance from the Sun which would result in a parallax of_____ arcsecond as seen from Earth when observed 6 months apart.
2. One parsecs is about_____light years.
3. The more distant a star, the_____its parallax.
4. The statement "we can measure stellar parallax for most stars in our galaxy" is_____.
5. The closest stars have parallaxes smaller than______arcsecond.
6. The first successful measurements of stellar parallax were made by______in year______for the star named.
7. Star Fred has parallax four times greater than star Bob. Star Fred is______times______then star Bob.

Answers

Answer:

Explanation:

1. A parsec is defined as the distance from the Sun which would result in a parallax of_TWO____ arcsecond as seen from Earth when observed 6 months apart.

2. One parsecs is about_3.3____light years

3. The more distant a star, the_LESS ____its parallax.

4. The statement "we can measure stellar parallax for most stars in our galaxy" is__TRUE .___.

5. The closest stars have parallaxes smaller than_.002 _____arcsecond.

6. The first successful measurements of stellar parallax were made by_Friedrich Bessel_____in year_1838_____for the star named.

7. Star Fred has parallax four times greater than star Bob. Star Fred is__4____times_nearer_____than star Bob.

a 6 letter word a way of explaining an object or event using a set of facts

Answers

Explanation:

A theory is a way of explaining an object or event using a set of facts.

Which of the following object is in dynamic equilibrium?

Answers

Answer:

A car driving in a straight line 20 m/s

Explanation:

ayepecks silly

Which refers to the rate of change in velocity?
O speed
O acceleration
O direction
O magnitude

Answers

Answer:

acceleration is the answer

Answer:

Acceleration

Explanation:

A classroom measures 3 m X 4m x 6 m.
Calculate the volume of air in the room. Give your answer in
a
cubic metres (mº).

Answers

3m * 4m * 6m= 72m^3
I hope you get it

if rain drops of equal size fall with terminal velocity of 0.50m/s. what will be the terminal velocity if the drops collaspe to form a big drop?

Answers

Answer:

0.25m/s

Explanation:

m1v1 =m2 v2. law of conservation the of momentum. since they smash together to form a big drop M2 =2m1

m1*0.50m/s=2m1*v2

V2= m1*0.50m/s÷2m1

V2= 0.25m/s

Ted throws an object straight up into the air with an initial velocity of 54 ft/s from a platform that is 40 ft above the ground. Use the formula h(t)=−16t2+v0t+h0, where v0 is the initial velocity and h0 is the initial height. How long will it take for the object to hit the ground?

Answers

Answer:

The time it will take for the object to hit the ground will be 4.

Explanation:

You have:

h(t)=−16t²+v0*t+h0

Being v0 the initial velocity (54 ft/s) and  h0 the initial height (40 ft) and replacing you get:

h(t)=−16t²+54*t+40

To know how long it will take for the object to touch the ground, the height h(t) must be zero. So:

0=−16t²+54*t+40

Being a quadratic function or parabola: f (x) = a*x² + b*x + c, the roots or zeros of the quadratic function are those values ​​of x for which the expression is 0. Graphically, the roots correspond to the points where the parabola intersects the x axis. To calculate the roots the expression is used:

[tex]\frac{-b+-\sqrt{b^{2}-4*a*c } }{2*a}[/tex]

In this case you have that:

a=-16b= 54c= 40

Replacing in the expression of the calculation of roots you get:

[tex]\frac{-54+\sqrt{54^{2}-4*(-16)*40 } }{2*(-16)}[/tex]  Expresion (A)

and

[tex]\frac{-54-\sqrt{54^{2}-4*(-16)*40 } }{2*(-16)}[/tex] Expresion (B)

Solving the Expresion (A):

[tex]\frac{-54+\sqrt{5476 } }{2*(-16)}= \frac{-54+74}{2*(-16)}=\frac{20}{2*(-16)}=\frac{20}{-32}= -\frac{5}{8}[/tex]

Solving the Expresion (B):

[tex]\frac{-54-\sqrt{5476 } }{2*(-16)}= \frac{-54-74}{2*(-16)}=\frac{-128}{2*(-16)}=\frac{-128}{-32}= 4[/tex]

These results indicate the time it will take for the object to hit the ground can be -5/8 and 4. Since the time cannot be negative, then the time it will take for the object to hit the ground will be 4.

Answer:

4 seconds

Explanation:

i checked on the test and the other person was right give them brainliest

can someone plz go help me answer my question? I have to ask twice bc no one answered it the first time. a figure skater can increase her spin rotation rate from an initial rate of 1.0 rev every 1.5s to a final rate of 2.5rev/s. If her initial moment of inertia was 4.6kgxm^2, what is her final moment of inertia?

Answers

Answer:

1.2 kg m²

Explanation:

Angular momentum is conserved:

L = L

Iω = Iω

(4.6 kg m²) (1.0 rev / 1.5 s) = I (2.5 rev/s)

I = 1.2 kg m²

can someone proofread my Big freeze theory of the universe? does it make sense?

Answers

Answer:

Yes great job it was well written!:)

help me helpppp the last words are experience a total ​

Answers

Answer:

False

Explanation:

Total internal reflection is a condition that occurs when light travels from dense medium to less dense medium.

From the table given in the question above,

Refractive Index of Whale oil = 1.460

Refractive Index of vacuum = 1

From the above, we can see that the whale oil has a higher Refractive Index than vacuum. This implies that the whale oil is denser than the vacuum.

Therefore, total internal reflection will occur when light travels from whale oil to vacuum because the whale oil is denser than the vacuum.

A river flows with a speed of 3km/h in still water. A man who can swim with a speed of 5km/h wishes to reach a point on the other bank just opposite to the starting point. In which direction should he put his strokes and how long will he take to cross the river of width 1.2km? Please try to provide a diagram and step by step explanation.

Answers

Answer:

Explanation:

Let the angle required be θ with direction opposite to current .

cos θ = 3 / 5

θ = 53° .

Resultant velocity towards the opposite side

= √ ( 5 ² - 3²)

= 4 km /h

distance covered = 1.2 km

time taken = 1.2 / 4 = .3 h

= 18 min .

find the molecular formula of the following​

Answers

Answer: hello i am a hacker

Explanation:

magnesium sulphate=(24*1)+(32*1)+(16*4)=120                                                             water=H2O=(1*2)+(1*16)=18                                                                                                        carbon dioxide=CO2=(12*1)+(16*2)=44                                                                                     ammonia=NH3=(14*1)+(1*3)=17                                                                                                   alminiumsulphate=AL2(SO4)3=(26*2)+(32*3)+(12*16)=340                                                          hydrogen peroxide=H2O2=(1*2)+(16*2)=34                                                              zinc sulphate=ZNSO4=(65*1)+(32*1)+(16*4)=161

         

You work for an advertising company and have been hired to place a blimp above a football stadium. The angle of elevation from a point directly under the goal post is 72° and the blimp will be directly above the 50 yard line. a. Which trigonometric ratio would you use to calculate how high the blimp will be above the 50 yard line? b. How high above the ground is the blimp? c. In order to be able to read the advertisement on the side of the blimp the highest the blimp can be is 150 feet. Will the fans be able to read the advertisement? If not, what possible angle of elevation could we use? d. What is the exact angle if the blimp is at 150 feet?

Answers

Answer:

a) tangent ; b) 153.88 yds ; c) No , less than or equal to 45° ; D) 45°

Explanation:

Given the following ;

From the triangle sketch :

Base length = 50 yards

Angle of elevation = 72°

a. Which trigonometric ratio would you use to calculate how high the blimp will be above the 50 yard line?

Using trigonometry :

The height of the blimp will be calculated using :

Tangent :

Tan θ = opposite / Adjacent

B.) How high above the ground is the blimp?

Using :

Tan θ = opposite / Adjacent

Θ = 72° ; adjacent = 52, opposite = height(h)

Tan 72° = h / 50

h = 3.0776835 * 50

h = 153.88 yds

C.) In order to be able to read the advertisement on the side of the blimp the highest the blimp can be is 150 feet. Will the fans be able to read the advertisement?

1 yard = 3 Feets

153.88 yards = 3 * 153.88

= 461.65 feets

No, because the height of the blimp is 461.65 Feets which is greater than 150 Feets.

To make viewing possible, the angle of elevation should be:

50 yards is equivalent to (3 * 50) = 150 feets

Max imum Height of blimp = 150 Feets

From pythagoras ;

Tanθ = 150 Feets / 150 Feets

Tanθ = 1

θ = tan^-1(1)

θ = 45°

To make viewing advertisement possible, angle of elevation should not exceed 45°

d.)If height of blimp is 150 Feets, then the exact angle of elevation will be 45°

As a new electrical technician, you are designing a large solenoid to produce a uniform 0.170 T magnetic field near its center. You have enough wire for 3800 circular turns, and the solenoid must be 1.60 m long and 20.0 cm in diameter. What current will you need to produce the necessary field?

Answers

Answer:

Explanation:

Magnetic field = permeability x turn density x current

Magnetic field = 0.22T

turn density = 4150 /1.6 = 2593.75 t/m

permeability : µ = k µ°

µ°= 4 π 10^-7

k = 1

I = 0.22 / 4 π 10^-7 * 2593.75 = 0.22 10^7 /32594 = 67.497 A

Other Questions
A ball always bounces to 3/5 of the height from which it is dropped. The ball is dropped from 1.8m and bounces 3 times. How high will it rise from the third bounce? The formula relating linear velocity v and angular velocity for a circle of radius r is______ , where the angular velocity must be measured in radians per unit time. Given a line segment that contains the points A,B,& C in order, if AB = x + 12, and Bo2.4, and AC = 26 = ? Sherman entered the following values into the TVM Solver on his graphingcalculatorN=I%=3.7PV=-49PMT=0FV=98P/Y=1C/Y=1E11PMT:ENU BEGINWhat does the rule of 69 predict will be the approximate value of N?A. 13.2B. 18.6C. 19.5D. 26.5 Sex and Violence in MediaStructural Functionalist Perspective:Conflict Perspective:Symbolic Interactionist Perspective: PLZ HELP IT NEEDS TO ALSO BE SAOD IN FRENCH PLZ IF U CANT ANSWER LET SOMEONE ELSE I NEED HELP FAST PLZ !!!Research online about any neighborhood in Geneva, Switzerland. Use the Internet to gather information aboutsome of the local shops, stores that offer retail services, and public emergency services that are available in theneighborhood. In French, describe each store and explain the services provided in the neighborhood. How will you connect 3 cells each of value 2V to give a total of 3V * Two in parallel with one in series Two in series with one in parallel All in parallel All in series Match the correct property of operations to each pair of equivalent expressions so that the property can be applied tothe first expression to generate the second expression Drag the items on the left to the correct location on the right(x+20) + 12 and 7x +(24+12)Distributive PropertyCommutate Propertyx+4y-Sy and x-5yAssociative Property21x+28y and 7(3x + 4y)combining like termsTy + 6x and 6x + 7y ANYONE THERE!!! ANY GENIUSES! !WILL GIVE BRALIEST!!!! PLEASE HELP FOR THESE ARE MY LAST 2 QUESTIONS!!! AT LEAST TAKE A LOOK!!! EASY I AM JUST DUMB7. Which of the following is the best example of effective academic discourse?A) Recreational tobacco inhalation is depicted as tantalizingly beguiling due to the fact that it evokes reckless abandon.B) According to the American Lung Association, cigarette smokers are often portrayed as glamorous and attractive.C) Cigarettes are gross. Cigarettes are dangerous. Don't believe Hollywood. Cigarettes aren't cool.D) I learned the hard way that cigarettes aren't as fashionable and fun as the movies make them out to be.11. Read this passage from Bret Harte's Western "The Outcasts of Poker Flat."As Mr. John Oakhurst, gambler, stepped into the main street of Poker Flat on the morning of the twenty-third of November, 1850, he was conscious of a change in its moral atmosphere since the preceding night. Two or three men, conversing earnestly together, ceased as he approached, and exchanged significant glances. There was a Sabbath lull in the air which, in a settlement unused to Sabbath influences, looked ominous.How does this excerpt reveal "The Outcasts of Poker Flat" to be an example of Regionalism?A) It includes a colorful character and details that are unique to a small town in the West.B) It suggests that the main action will occur in a large city in the eastern United States.C) It refers to events that occurred in another region of the world than the United States.D) It describes events that occurred in 1850, when the western frontier was being settled. What is the simplified form of k-5+7 Veronica Mars, a recent graduate of Bells accounting program, evaluated the operating performance of Dunn Companys six divisions. Veronica made the following presentation to Dunns board of directors and suggested the Percy Division be eliminated. "If the Percy Division is eliminated," she said, "our total profits would increase by $26,500." The Other Five Divisions Percy Division Total Sales $1,663,000 $100,000 $1,763,000 Cost of goods sold 978,100 76,800 1,054,900 Gross profit 684,900 23,200 708,100 Operating expenses 529,000 49,700 578,700 Net income $155,900 $ (26,500 ) $129,400 In the Percy Division, cost of goods sold is $60,500 variable and $16,300 fixed, and operating expenses are $29,100 variable and $20,600 fixed. None of the Percy Divisions fixed costs will be eliminated if the division is discontinued. Is Veronica right about eliminating the Percy Division? Prepare a schedule to support your answer. In the 1800s, to increase their exports and decrease their imports, the Chinese demanded the Europeans pay them in : diamonds gold silver opium What should be done to repair damage done by hanford to Northwest indian communities physical and spiritual lives? what is the difference between ram and rom a. Equipment with a book value of $79500 and an original cost of $169000 was sold at a loss of $33000. b. Paid $106000 cash for a new truck. c. Sold land costing $310000 for $420000 cash yielding a gainof $11000. d. Long term investments in stock were sold for $95600 cash yielding a gain of $17000.Required:Use the above information to determine this company's cash flows from investing activities. Which of the following concepts was inadvertently challenged by Progressives' call for expertopinions?Woman's suffrageEfficiencyElected officials' autonomyMuckrakers' role Robert buys $3 shirts at $16.90 each, and a pair of jeans for $20.50. The shop has a sale on, and so he receives a $7.12 discount.Write and solve a numerical expression for how much he spends in total. Which expression can be used to determine the slope of the linear function represented in the table?05949-54-0O4-09-5o5-09-4O9-45-0 Shawn has a bank account with $4,625. He decides to invest the money at 3.52% interest,compounded annually. How much will the investment be worth after 9 years? Round tothe nearest dollar. During the first month of operations ended August 31, Kodiak Fridgeration Company manufactured 48,000 mini refrigerators, of which 44,000 were sold. Operating data for the month are summarized as follows: 1. Sales $8,800,000.00 2. Manufacturing costs: 3. Direct materials $3,360,000.00 4 Direct labor 1,344,000.00 5 Variable manufacturing cost 816,000.00 6 Fixed manufacturing cost 528,000.00 6,048,000.00 7 Selling and administrative expenses: 8 Variable $528,000.00 9 Fixed 352,000.00 880,000.00Required:Prepare an income statement based on the absorption costing concept.