The solubility of the gas at a pressure of 85 kPa is 0.456 g/L.
What occurs to gas solubility as pressure increases?The relationship between pressure and a gas's solubility is straightforward. That is, it gets bigger as the strain gets bigger.
The combined gas law can be used to resolve this issue and says that:
(P1V1)/T1 = (P2V2)/T2
To solve for V2, which stands for the new volume at the reduced pressure, we can rearrange this equation as follows:
V2 = (P1V1T2)/(P2T1)
Since the temperature is held constant, T1 = T2, and this simplifies to:
V2 = (P1V1)/P2
Solubility2 = (Solubility1 x P2) / P1
where the solubility at greater pressure is denoted by Solubility1.
With numbers from the problem substituted, we obtain:
Solubility2 = (0.584 g/L x 85 kPa) / 109 kPa
Simplifying this expression, we get:
Solubility2 = 0.456 g/L.
To know more about solubility visit:-
https://brainly.com/question/28170449
#SPJ1
a storefront window is broken and a robbery committed. a suspect is later found running from the scene. examination of his shoes reveals glass particles embedded in a heel. describe the proper collection and preservation of glass evidence for laboratory examination.
The proper collection and preservation of glass evidence for laboratory examination is crucial to make sure that no contamination or damage occurs to the evidence while it is being collected or transported.
Collecting the glass evidence: Carefully pick up the glass shards one at a time, using forceps or gloved hands, and place them into clean, sterile containers, such as paper bags or envelopes. Carefully label the container and include details such as the location and date of collection, the name of the person collecting it, and any other pertinent information.
Preservation of the glass evidence: After collection, the evidence must be protected from damage, contamination, or any other interference. For glass evidence, the following steps should be followed:Each container should be sealed with evidence tape and stored in a clean, dry, and temperature-controlled environment until it can be transported to the laboratory.
If the glass evidence is suspected of containing DNA or other biological material, it should be kept refrigerated. Any notes, photographs, sketches, or other documentation should be stored with the evidence.
Chain of custody: It is important to maintain a strict chain of custody for all evidence, including glass evidence. This means that every person who handles the evidence must be recorded, and there must be a clear record of its location at all times. This is important to ensure that the evidence is not tampered with, lost, or damaged in any way.
This will allow the evidence to be used in court, and ensure that the suspect is properly prosecuted for the crime committed.
For more such questions on Glass evidence preservation
https://brainly.com/question/17591949
#SPJ11
what volume of 0.166 mna3po4 solution is necessary to completely react with 95.4 ml of 0.107 mcucl2 ?
33 mL volume of 0.166 M Na₃PO₄ solution is necessary to completely react with 95.4 mL of 0.107 M CuCl₂.
To determine the volume of 0.166 M Na₃PO₄ solution needed to react with 95.4 mL of 0.107 M CuCl₂, we can use the balanced chemical equation for the reaction between CuCl₂ and Na₃PO₄
3CuCl₂ + 2Na₃PO₄ → Cu₃(PO₄)₂ + 6NaCl
From the balanced equation, we can see that 2 moles of Na₃PO₄ are required to react with 3 moles of CuCl₂. Therefore, we can use the following formula to calculate the volume of Na₃PO₄ solution needed
V(Na₃PO₄) = (n(CuCl₂) × V(CuCl₂) × 2) / (3 × M(Na₃PO₄))
where; V(Na₃PO₄) is the volume of 0.166 M Na₃PO₄ solution needed (in mL)
n(CuCl₂) is the number of moles of CuCl₂ present (in mol)
V(CuCl₂) is the volume of 0.107 M CuCl₂ solution (in mL)
M(Na₃PO₄) is the molarity of the Na₃PO₄ solution (in mol/L)
Put the given values into formula, we have;
V(Na₃PO₄) = (0.107 mol/L × 0.0954 L × 2) / (3 × 0.166 mol/L)
V(Na₃PO₄) = 0.033 L or 33 mL (rounded to 2 significant figures)
Therefore, 33 mL volume will be needed.
To know more about volume here
https://brainly.com/question/1578538
#SPJ4
which of the following compounds is essentially insoluble in water? a. ba(no3)2 b. kbr c. li2so4 d. ch3coona e. fes
The compound that is essentially insoluble in water is (e) FeS (Iron (II) sulfide).
The compound that is essentially insoluble in water is FeS. So, option E is accurate.
A compound is considered to be insoluble in water if it does not dissolve in water. These compounds are referred to as water-insoluble or hydrophobic. Such compounds are usually ionic in nature or have an extremely low solubility in water. Ionic compounds usually have a higher melting point than covalent compounds; they are formed when atoms gain or lose electrons. Water-insoluble compounds contain one or more ions which are not soluble in water.
In order to determine whether or not a compound is water insoluble, one must first examine the elements in the compound. If the compound has an ionic bond, it will be water-insoluble. This is because ionic compounds have very strong electrostatic attractions between the positively and negatively charged ions, making them difficult to break apart. On the other hand, covalent compounds, which are bonded through sharing electrons, are usually soluble in water because they do not have a charge separation between atoms.
To know more about insoluble
brainly.com/question/15201679
#SPJ11
an element has two naturally-occurring isotopes. the mass numbers of these isotopes are 115.00 u and 117.00 u, with natural abundances of 15% and 85%, respectively. calculate its average atomic mass. report your answer to 2 decimal places.
The average atomic mass of the element is 116.70 u. To calculate the average atomic mass of an element with two naturally-occurring isotopes with mass numbers 115.00 u and 117.00 u, and natural abundances of 15% and 85%, respectively, follow these steps:
1. Convert the natural abundances into decimals: 15% = 0.15 and 85% = 0.85.
2. Multiply the mass number of each isotope by its corresponding abundance: (115.00 u × 0.15) and (117.00 u × 0.85).
3. Add the products from step 2 together: (115.00 u × 0.15) + (117.00 u × 0.85).
4. Round the result to 2 decimal places.
Calculating the values: (115.00 u × 0.15) = 17.25 u; (117.00 u × 0.85) = 99.45 u; 17.25 u + 99.45 u = 116.70 u. The average atomic mass of the element is 116.70 u.
To know more about atomic mass, refer here:
https://brainly.com/question/17067547#
#SPJ11
anyone there can help me? thank you so much!!
Answer:
the momentum of the car is 36km per hour
a chemist wants to make a solution of 3.4 m hci. he can find 2 solutions of hci on the shelf. one has a concentration of 6.0 m, while the other has a concentration of 2.0 m. which solution can the chemist use to make the desired acid?
The chemist can use the 6.0 M HCl solution to make the 3.4 M solution by diluting 566.7 mL of the 6.0 M solution to a final volume of 1 L.
To make a 3.4 M solution of HCl, the chemist needs to dilute a concentrated HCl solution to a specific volume. Let's use the formula;
C₁V₁ = C₂V₂
Where C₁ is the concentration of the concentrated HCl solution, V₁ is the volume of the concentrated HCl solution needed, C₂ is the desired concentration of the final solution (3.4 M), and V₂ is the final volume of the solution.
We can rearrange this formula to solve for V₁
V₁ = (C₂V₂) / C₁
Substituting the values, we get;
V₁ = (3.4 M x 1 L) / 6.0 M = 0.5667 L = 566.7 mL
Or
V₁ = (3.4 M x 1 L) / 2.0 M
= 1.7 L
The chemist cannot use the 2.0 M HCl solution to make the desired 3.4 M solution, as it is too dilute to achieve the desired concentration.
To know more about concentration here
https://brainly.com/question/10725862
#SPJ4
which strand is the coding strand, and where would the n-terminal end of the polypeptide built from this dna be located?
The coding strand in DNA is the strand that contains the genetic code that is used to build a polypeptide. The n-terminal end of the polypeptide built from this DNA would be located at the 5' end of the coding strand.
What is a coding strand?A coding strand is a strand of DNA that contains the genetic code for building a polypeptide. During the process of transcription, RNA polymerase reads the sequence of the coding strand and creates a complementary RNA sequence called the messenger RNA (mRNA).
The mRNA then carries the genetic code out of the nucleus and into the cytoplasm, where it is used to build a polypeptide.
The other strand of DNA, which is not being transcribed, is called the template strand.
This strand is complementary to the coding strand and is read by RNA polymerase to create the mRNA sequence. However, the mRNA sequence is not identical to the template strand sequence because it is created using RNA nucleotides instead of DNA nucleotides.
What is the n-terminal end of a polypeptide?The n-terminal end of a polypeptide is the end of the protein chain that contains the amino group (-NH2). This end is also called the amino-terminus or N-terminus.
The other end of the chain is called the c-terminal end and contains the carboxyl group (-COOH). This end is also called the carboxy-terminus or C-terminus.
The sequence of amino acids in a polypeptide determines its shape and function, which are critical for its biological activity.
To know more about DNA refer to-
brainly.com/question/264225#
#SPJ11
7. Nitrogen has occupies 46 L of space at 26°C. The temperature is increased
to 75°C. What volume does the gas occupy after the temperature has
increased?
The gas occupies 53.3 L of space after the temperature has increased to 75°C.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance or system. In other words, it is a measure of how fast the particles are moving on average. Temperature is commonly measured in degrees Celsius (°C) or Fahrenheit (°F), although in science and engineering, the Kelvin (K) scale is often used.
To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:
(P1 × V1) / T1 = (P2 × V2) / T2
where P1 and T1 are the initial pressure and temperature, V1 is the initial volume, and P2 and T2 are the final pressure and temperature, and V2 is the final volume.
We are given that the initial volume V1 is 46 L, the initial temperature T1 is 26°C, and the final temperature T2 is 75°C. We need to find the final volume V2.
First, we need to convert the temperatures to the absolute scale (Kelvin) by adding 273.15 to each temperature:
T1 = 26°C + 273.15 = 299.15 K
T2 = 75°C + 273.15 = 348.15 K
Now we can use the combined gas law:
(P1 × V1) / T1 = (P2 × V2) / T2
We can assume that the pressure is constant since it is not given in the problem. Therefore, we can simplify the equation to:
V2 = (V1 × T2) / T1
V2 = (46 L × 348.15 K) / 299.15 K
V2 = 53.3 L (rounded to one decimal place)
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ1
(associating principles from electronic structure with periodic properties). the ionization energy for an isolated gaseous atom of sodium is 496 kj/mol. what is the longest wavelength of electromagnetic radiation capable of ionizing sodium atoms in the gaseous state?
The longest wavelength of electromagnetic radiation capable of ionizing sodium atoms in the gaseous state is 2.42 × 10^-7 meters,
The ionization energy for an isolated gaseous atom of sodium is 496 kJ/mol. To convert this energy into joules per atom, we divide by Avogadro's number (6.02 × 10^23 atoms/mol) to get 8.25 × 10^-19 J/atom. We can use the equation E = hc/λ, where E is the energy of the electromagnetic radiation, h is Planck's constant (6.626 × 10^-34 J s), c is the speed of light (2.998 × 10^8 m/s), and λ is the wavelength of the radiation.
Rearranging the equation to solve for λ, we get λ = hc/E. Substituting in the values we have,
λ = (6.626 × 10^-34 J s) × (2.998 × 10^8 m/s) / (8.25 × 10^-19 J/atom)
λ = 2.42 × 10^-7 m
To know more about wavelength, here
brainly.com/question/17460613
#SPJ4
when equal molar amounts of the following sets of compounds are mixed in water, which could not form a buffer solution? nah2po4 with na2hpo4 nh3 with nh4cl hc2h3o2 with nac2h3o2 hno3 with nano3
The set of compounds that cannot form a buffer solution when mixed in equal molar amounts is HNO3 with NaNO3. This is the correct option.
A buffer solution is formed when a weak acid and its conjugate base or a weak base and its conjugate acid are mixed in water. To determine which set of compounds cannot form a buffer solution, we need to identify the strong acids or bases in the given sets.
1. NAH2PO4 with Na2HPO4: Both are a weak acid and its conjugate base, so they can form a buffer solution.
2. NH3 with NH4Cl: Both are a weak base and its conjugate acid, so they can form a buffer solution.
3. HC2H3O2 with NaC2H3O2: Both are weak acid and its conjugate base, so they can form a buffer solution.
4. HNO3 with NaNO3: HNO3 is a strong acid, so it cannot form a buffer solution with its conjugate base.
to know more about buffer refer here:
https://brainly.com/question/22821585#
#SPJ11
a material is made from al, ga, and as. the mole fraction of each element is 0.25, 0.26, and 0.49, respectively. this material would be
The correct answer is option C) a p-type semiconductor. This is because the material contains aluminum (Al), gallium (Ga), and arsenic (As).
Since aluminium is a metallic element, it conducts electricity well. Because gallium is a semi-metal, it possesses some characteristics of both metals and non-metals. As arsenic is a non-metal, it conducts electricity poorly.
Together, these three substances make up a p-type semiconductor. In a p-type semiconductor, the material itself has a positive charge and the bulk of the charge carriers are positively charged.
Transistors, diodes, and solar cells are examples of electronic components that utilise this kind of material.
The material is a p-type semiconductor because it has a mixture of metal, semi-metal, and non-metal elements in moles of 0.25, 0.26, and 0.49, respectively.
Complete Question:
A material is made from Al, Ga, and As. The mole fraction of each element is 0.25, 0.26, and 0.49, respectively. This material would be
A) a metallic conductor because Al is present
B) an insulator
C) a p-type semiconductor
D) an n-type semiconductor
E) none of the above
To learn more about p-type semiconductor visit:
https://brainly.com/question/11199545
#SPJ4
during normal ventilation, exhaled air has a co2 concentration of 35 mmhg. what would you predict the value of the first exhalation would be after a prolonged breath hold?
During a prolonged breath hold, the body continues to consume oxygen and produce carbon dioxide. As a result, the concentration of carbon dioxide in the lungs increases.
It is one of the most important and widely used concepts in chemistry as it allows us to quantify the amount of a particular substance in a given system. Concentration plays a crucial role in many chemical reactions, as the rate of a reaction is often directly proportional to the concentration of the reactants.
There are different ways to express concentration, including molarity, molality, mass percentage, mole fraction, and parts per million (ppm). Molarity is the most commonly used unit of concentration and is defined as the number of moles of solute present in one liter of solution. Molality is similar to molarity but is defined as the number of moles of solute present in one kilogram of solvent. Moreover, it is essential to accurately measure the concentration of solutions in various industrial processes such as pharmaceuticals, food production, and water treatment.
To learn more about Concentration visit here:
brainly.com/question/10725862
#SPJ4
a 110 g molybdenum block is heated to 100.0oc and immersed in 150 g of water in a styrofoam cup. the initial temperature of the water was 24.6oc. if the final temperature of the block and the water were 28.0oc, what is the specific heat of the molybdenum?
The specific heat of molybdenum is calculated to be approximately 0.271 J/g°C.
To find the specific heat of molybdenum, we can use the heat transfer equation:
q = mcΔT
where q is the heat transferred, m is the mass, c is the specific heat, and ΔT is the change in temperature.
Calculate the heat gained by the water:
m_water = 150 g
c_water = 4.18 J/g°C (specific heat of water)
ΔT_water = 28.0°C - 24.6°C = 3.4°C
q_water = m_water × c_water × ΔT_water
q_water = 150 g × 4.18 J/g°C × 3.4°C = 2130.84 J
Calculate the heat lost by the molybdenum block:
m_molybdenum = 110 g
ΔT_molybdenum = 100.0°C - 28.0°C = 72.0°C
q_molybdenum = -q_water = -2130.84 J
Solve for the specific heat of molybdenum:
q_molybdenum = m_molybdenum × c_molybdenum × ΔT_molybdenum
c_molybdenum = q_molybdenum / (m_molybdenum × ΔT_molybdenum)
c_molybdenum = -2130.84 J / (110 g × 72.0°C)
Calculate c_molybdenum:
c_molybdenum ≈ 0.271 J/g°C
The specific heat of molybdenum is therefore approximately 0.271 J/g°C.
More on specific heat: https://brainly.com/question/12970070
#SPJ11
a buffer contains 1.0 mol of ch3co2h and 1.0 mol ch3co2- dilluted with water to 1.0 l. how many moles of naoh ware required to increase teh ph of the buffer to 5.1
For every mole of [tex]CH_3CO_2H[/tex] consumed, we need one mole of NaOH. Therefore, we need 2.23 moles of NaOH to increase the pH of the buffer to 5.1.
The dissociation reaction of acetic acid ([tex]CH_3CO_2H[/tex]) in water can be represented as:
[tex]CH_3CO_2H + H_2O[/tex] ↔ [tex]CH_3CO_2^{-} + H_3O^{+}[/tex]
This reaction involves the transfer of a proton ([tex]H^+[/tex]) from the acid ([tex]CH_3CO_2H[/tex]) to water, resulting in the formation of its conjugate base [tex](CH_3CO_2^-)[/tex] and a hydronium ion ([tex]H_3O^+[/tex]). The equilibrium constant expression for this reaction is:
[tex]Ka = [CH_3CO_2^-][H_3O^+] / [CH_3CO_2H][/tex]
At the pH of the buffer (around 4.76), the concentrations of [tex]CH_3CO_2H[/tex]and [tex]CH_3CO_2^-[/tex] are equal, which means that [tex][CH_3CO_2^-] = [CH_3CO_2H][/tex]. Therefore, the equilibrium constant expression simplifies to:
[tex]Ka = [H_3O^+] = [CH_3CO_2^-] / [CH_3CO_2H][/tex]
To increase the pH of the buffer to 5.1, we need to add hydroxide ions [tex](OH^-)[/tex] to the solution. The reaction between hydroxide ions and hydronium ions can be represented as:
[tex]OH^- + H_3O^+[/tex] ↔ [tex]2H_2O[/tex]
We can use the Henderson-Hasselbalch equation to calculate the amount of NaOH required to achieve the desired pH:
[tex]pH = pKa + log([CH_3CO_2^-] / [CH_3CO_2H])\\5.1 = 4.76 + log([CH_3CO_2^-] / [CH_3CO_2H])\\log([CH_3CO_2^-] / [CH_3CO_2H]) = 0.34\\[CH_3CO_2^-] / [CH_3CO_2H] = 2.23\\[CH_3CO_2^-] = [CH_3CO_2H] x 2.23\\[CH_3CO_2^-] = 2.23 mol\\[CH_3CO_2H] = 1.0 mol[/tex]
We need to add enough NaOH to the solution to convert 2.23 moles of [tex]CH_3CO_2H[/tex] to [tex][CH_3CO_2^-][/tex] and increase the pH to 5.1. The reaction between NaOH and [tex]CH_3CO_2H[/tex]can be represented as:
[tex]NaOH + CH_3CO_2H[/tex]→ [tex]CH_3CO_2^- + Na^+ + H_2O[/tex]
For more question on pH click on
https://brainly.com/question/12609985
#SPJ11
in class, we examined the change in the uv-vis spectrum for pt3-tpd as a function of temperature as shown by the repeat unit structure and spectra below. explain: what is causing the absorption at ca. 500 nm. what is causing the absorption to evolve at 600 to 625 nm. why the spectra cross at ca. 530 nm
At low temperatures, the HOMO→LUMO transition has a higher absorption, while the interligand transition has a lower absorption. However, as the temperature increases, the interligand transition becomes more significant, and the absorption peak shifts to longer wavelengths. When the HOMO→LUMO and interligand transitions are about the same, they cross, which causes the spectra to cross at around 530 nm.
As part of your class work, you examined the change in the UV-Vis spectrum for Pt3-TPD. A repeat unit structure and spectrum were used to represent the changes that occurred as the temperature varied. Based on this information, you need to explain what is causing the absorption at around 500 nm, what causes the absorption to evolve between 600-625 nm, and why the spectra cross at about 530 nm.The absorption at around 500 nm is caused by the HOMO→LUMO transitions of the Pt3-TPD oligomers. HOMO and LUMO are molecular orbitals that are related to the highest occupied molecular orbital and the lowest unoccupied molecular orbital, respectively. When an electron in the highest occupied molecular orbital (HOMO) is excited to the lowest unoccupied molecular orbital (LUMO) by the absorption of light at around 500 nm, this transition leads to absorption at this wavelength. The LUMO state of Pt3-TPD is primarily a delocalized π-π* state that is influenced by the phenyl rings that are substituted onto the TPD ligand. The absorption at this wavelength is also influenced by the arrangement of the chromophores in the Pt3-TPD oligomers.The absorption that occurs between 600-625 nm is due to the interligand transitions in Pt3-TPD oligomers. The Pt3-TPD oligomers contain pi-stacked chromophores that are closely linked together. When an electron in one chromophore is excited by the absorption of light, it causes a change in the energy level of the other chromophores, resulting in absorption in the 600-625 nm range. The absorption peak in this range becomes sharper and more well-defined as the temperature rises because it corresponds to intermolecular pi-stacking.The spectra cross at around 530 nm due to the overlap of the HOMO→LUMO and interligand transitions.
to learn more about: temperatures
https://brainly.com/question/4735135
#SPJ11
what is the molarity of a solution made by dissolving 1.59 mol of lithium chloride in enough water to make 2.37 l of solution
The molarity of the lithium chloride solution is 0.671 M.
Molarity is a unit of concentration used to measure the amount of solute dissolved in a given volume of solution. It is defined as the number of moles of solute dissolved in one liter of solution, and its unit is moles per liter (mol/L).
To calculate the molarity of the solution, we need to divide the number of moles of solute by the volume of solution in liters.
Molarity = moles of solute/volume of solution in liters
In this case, we are given that 1.59 mol of lithium chloride is dissolved in enough water to make 2.37 L of solution. Therefore, the molarity will be calculated as
Molarity = 1.59 mol / 2.37 L
Molarity = 0.671 M
To know more about molarity here
https://brainly.com/question/8732513
#SPJ4
what is the relationship between the average speed of a glider and the force exerted by a magnet?
The average speed of a glider and the force a magnet produces are not directly proportional. A glider's speed is influenced by a number of variables, such as its design and the means of propulsion.
How do acceleration and the net force on a glider relate to one another?According to Newton's second law, a force is equal to an object's mass times its acceleration. The acceleration of the glider was decreased by altering its mass. The acceleration increased as the force applied to the glider grew, proving Newton's second law.
What is the glider's overall net force?The object is not under any net forces. The forces balance out if the object is moving at a steady speed because it isn't accelerating. Only if a net force other than zero applies on the glider will it experience a change in speed.
To know more about acceleration visit:-
brainly.com/question/20513633
#SPJ1
Fluorine gas and water vapor react to form hydrogen fluoride gas and oxygen. What volume of oxygen would be produced by this reaction if 8.49cm^3 of fluorine were consumed?
Also, be sure your answer has a unit symbol, and is rounded to the correct number of significant digits.
The volume of oxygen gas produced is 7.72 x[tex]10^{-4}[/tex] L (or 0.772 mL) at STP.
What is Pressure?
Pressure is defined as the force applied per unit area. It is a scalar quantity, meaning that it has only magnitude and no direction. Pressure can be expressed in a variety of units, such as pascals (Pa), pounds per square inch (psi), atmospheres (atm), or torr.
The balanced chemical equation for the reaction is:
F2(g) + 2H2O(g) -> 2HF(g) + O2(g)
From the equation, we can see that 1 mole of fluorine gas (F2) reacts to form 1 mole of oxygen gas (O2). We can use the ideal gas law to calculate the volume of oxygen gas produced:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
Assuming standard temperature and pressure (STP) of 0°C and 1 atm, we can simplify the equation to:
V = nRT/P
where R = 0.0821 L atm/(mol K) is the gas constant.
To find the number of moles of oxygen produced, we need to first find the number of moles of fluorine consumed. We can use the ideal gas law again, assuming that the volume of the fluorine gas is measured under STP conditions:
PV = nRT
n = PV/RT = (1 atm)(8.49 [tex]CM^{3}[/tex])/(0.0821 L atm/(mol K) * 273 K) = 3.74 x [tex]10^{-5}[/tex]mol
So, we know that 3.74 x 10^-5 moles of F2 react to form the same number of moles of O2. We can use this to calculate the volume of O2 produced:
V = nRT/P = (3.74 x [tex]10^{-5}[/tex] mol)(0.0821 L atm/(mol K))(273 K)/(1 atm) = 7.72 x [tex]10^{-4}[/tex]L
Learn more about Pressure from the given link
https://brainly.com/question/28012687
#SPJ1
You are measuring the Kc for the reaction: A (g)
⇔
B (g) + C (g)
A 2.00 mol sample of A is sealed in a 1.00 L flask and allowed to reach equilibrium with B and C. The equilibrium concentration of B is found to be 0.39 M. What is the numerical value of Kc for this reaction?
Answer:
Explanation:
The Kc for the reaction would be ? Q. The value of Kp for the reaction, 2SO2(g)+O2(g)⇌2SO3(g) is 5.
The specific heat of marble is 0.858 J / g How much heat (in J) is required to raise the temperature of 20.0 g of marble from 22 °C to 45 °C?
Answer:
394.68 J
Explanation:
The amount of heat gained or lost by an object when its temperature changes can be calculated by using the formula:
Specific Heat Capacity[tex]\boxed{\sf c = \dfrac{Q}{m \cdot \Delta T}}[/tex]
where:
c is the specific heat of the object.Q is the heat gained or lost in joules (J).m is the mass of the object.ΔT is the change in temperature.The initial temperature of the marble was 22°C and its final temperature is 45°C. Therefore, the change in temperature, ΔT, is:
[tex]\implies \sf \Delta T=45^{\circ}C-22^{\circ}C=23^{\circ}C[/tex]
Therefore, the values to substitute into the formula are:
m = 20.0 gc = 0.858 J / (g · °C)ΔT = (45°C - 22°C) = 23°CSubstitute these values into the formula:
[tex]\implies \sf \dfrac{0.858\;J}{g \cdot \!\!\!\!\phantom{2}^{\circ}C}}=\dfrac{Q}{20.0\;g \cdot 23 ^{\circ}C}[/tex]
[tex]\implies \sf Q=\dfrac{0.858\;J \cdot 20.0\;g \cdot 23^{\circ}C}{g \cdot \!\!\!\!\phantom{2}^{\circ}C}}[/tex]
[tex]\implies \sf Q=0.858\;J \cdot 20.0 \cdot 23[/tex]
[tex]\implies \sf Q=394.68\;J[/tex]
Therefore, 394.68 J of heat is required to raise the temperature of 20.0 g of marble from 22°C to 45°C.
[tex]\blue{\huge {\mathrm{SPECIFIC \; HEAT \; CAPACITY}}}[/tex]
[tex]\\[/tex]
[tex]{===========================================}[/tex]
[tex]{\underline{\huge \mathbb{Q} {\large \mathrm {UESTION : }}}}[/tex]
The specific heat of marble is 0.858 J/g. How much heat (in J) is required to raise the temperature of 20.0 g of marble from 22°C to 45°C?[tex]{===========================================}[/tex]
[tex] {\underline{\huge \mathbb{A} {\large \mathrm {NSWER : }}}} [/tex]
The amount of heat required to raise the temperature of 20.0 g of marble from 22°C to 45°C is 394.68 Joules.[tex]{===========================================}[/tex]
[tex]{\underline{\huge \mathbb{S} {\large \mathrm {OLUTION : }}}}[/tex]
The formula for calculating the amount of heat required to raise the temperature of an object is:
[tex]\sf Q = m \cdot c \cdot \Delta T[/tex]where
Q is the amount of heat required (in Joules),m is the mass of the object (in grams),c is the specific heat of the object (in Joules per gram degree Celsius), and[tex]\bold{\Delta T}[/tex] is the change in temperature (in degrees Celsius).Using the given values, we can plug them into the formula:
[tex]\begin{aligned}\sf Q& =\sf 20.0\: g \cdot 0.858\: J/g^{\circ}C \cdot (45^{\circ}C - 22^{\circ}C)\\& =\sf 20.0\: g \cdot 0.858\: J/g^{\circ}C \cdot 23^{\circ}C \\& = \boxed{\bold{394.68\: J}}\end{aligned}[/tex]
Therefore, the amount of heat required to raise the temperature of 20.0 g of marble from 22°C to 45°C is 394.68 Joules.
[tex]{===========================================}[/tex]
[tex]- \large\sf\copyright \: \large\tt{AriesLaveau}\large\qquad\qquad\qquad\qquad\qquad\qquad\qquad\tt 04/02/2023[/tex]
A 2.3 g sample of gold (specific heat capacity = 0.130 J/g °C) is heated using 92.3 J of energy. If the original temperature of the gold is 25.0°C, what is its final temperature?
Answer:
325.38°C
Explanation:
We can use the formula Q = mcΔT to solve this problem, where Q is the amount of heat transferred, m is the mass of the substance, c is its specific heat capacity, and ΔT is the change in temperature.
First, we need to calculate the amount of heat transferred:
Q = 92.3 J
Next, we need to calculate the change in temperature. We can rearrange the formula to solve for ΔT:
ΔT = Q / (mc)
where ΔT is the change in temperature, Q is the amount of heat transferred, m is the mass of the substance, and c is its specific heat capacity.
Plugging in the values we have:
ΔT = 92.3 J / (2.3 g x 0.130 J/g °C)
ΔT = 300.38 °C
This means that the temperature of the gold has increased by 300.38 °C. Since the initial temperature was 25.0°C, the final temperature will be:
Final temperature = Initial temperature + ΔT
Final temperature = 25.0°C + 300.38 °C
Final temperature = 325.38 °C
Therefore, the final temperature of the gold is 325.38°C.
What is the molecular weight (molar mass) of a gas with a density of 4.72 g/L at 124°C and 426 torr?
convert the following to mass in grams!!! 1.75 x 1023 atoms Pb
[tex]1.75 x 10^23[/tex] atoms of lead is equal to [tex]6.72 x 10^4[/tex]grams (or 67,200 grams) of lead.
To convert the number of atoms of lead (Pb) to grams, we need to use two important pieces of information:
The molar mass of lead (Pb)
Avogadro's number
The molar mass of lead (Pb) is the mass of one mole of lead atoms, and it is equal to 207.2 grams per mole (g/mol). Avogadro's number is the number of particles in one mole of a substance, and it is equal to[tex]6.022 x 10^23.[/tex]
To convert the number of atoms of lead (Pb) to grams, we need to use a conversion factor that relates the number of atoms to the number of moles, and then use the molar mass to convert from moles to grams.
The conversion factor we use is:
1 mol Pb /[tex]6.022 x 10^23[/tex] atoms Pb
This tells us that there is one mole of lead atoms for every [tex]6.022 x 10^23[/tex]lead atoms.
Next, we set up the calculation:
[tex]1.75 x 10^23[/tex] atoms Pb x (1 mol Pb /[tex]6.022 x 10^23[/tex] atoms Pb) x (207.2 g Pb / 1 mol Pb)
We start with the given number of atoms ([tex]1.75 x 10^23[/tex]atoms Pb), and we multiply it by the conversion factor (1 mol Pb / [tex]6.022 x 10^23[/tex] atoms Pb). This cancels out the units of atoms and gives us the number of moles of lead (Pb) atoms.
Next, we multiply by the molar mass of lead (Pb), which converts moles to grams.
This gives us the final answer:
[tex]6.72 x 10^4 g Pb[/tex].
Learn more about atoms here:
https://brainly.com/question/29695801
#SPJ1
a 25.00 ml sample of 0.200 m hcl is titrated with 0.2 m naoh. what is the ph after the addition of 12.50 ml of naoh?
The given concentration of HCl is 0.200 M and the volume of the solution is 25.00 mL.Moles of HCl = concentration × volume Moles of HCl = 0.200 M × 25.00 mL = 0.005 moles Since NaOH is added to this acid, a neutralization reaction occurs: NaOH + HCl → NaCl + H2OThe balanced chemical equation above indicates that 1 mole of HCl reacts with 1 mole of NaOH. This means that 0.005 moles of NaOH will be required to neutralize 0.005 moles of HCl.
Volume of NaOH used = 12.50 mL = 0.0125 LV = 0.2 MV = 0.0125 M Therefore, the number of moles of NaOH used in the reaction is:0.2 M × 0.0125 L = 0.0025 moles of NaOHHCl and NaOH neutralize each other, leaving NaCl and water. After the neutralization reaction, the remaining concentration of NaOH is 0.2 M - 0.1 M = 0.1 M.
The final volume of the solution is 25.00 mL + 12.50 mL = 37.50 mL. The concentration of the resulting solution is: 0.0025 / 0.0375 = 0.067 MTo calculate the pH, we need to use the equation: pH = -log[H3O+]The concentration of the acid solution after the addition of NaOH is negligible. Hence, the concentration of H3O+ is very small. pH = -log[H3O+]pH = -log(1.49 × 10^-10)pH = 9.83Therefore, the pH after the addition of 12.50 mL of NaOH is 9.83.
Therefore the answer is: pH of the solution after the addition of 12.50 mL of NaOH is 9.83.
For more questions on: volume
https://brainly.com/question/29493123
#SPJ11
suppose a chemical reaction generated a 50% nitrogen/50% oxygen (by volume) mixture of gas that had a total volume of 22.4 liters at stp. this gas sample is composed of:
The gas sample's total volume is 22.4 liters at STP. The gas sample is made up of 50 percent nitrogen and 50 percent oxygen (by volume). The composition of a 50% nitrogen/50% oxygen gas sample that has a total volume of 22.4 liters at STP is: 50 percent nitrogen (N2)50 percent oxygen (O2)N2 is nitrogen's chemical formula, and O2 is oxygen's chemical formula. So the answer is: 50% nitrogen and 50% oxygen by volume, with a total volume of 22.4 liters at STP.
This gas sample has a composition of two non-reactive gases that are widely utilized in various industries as raw materials. Nitrogen is used in welding, food packaging, and cryogenics, while oxygen is used in gas welding, medical therapy, and space applications.
Therefore the gas sample is composed of 50% nitrogen and 50% oxygen by volume, with a total volume of 22.4 liters at STP.
For more questions on: oxygen
https://brainly.com/question/28009615
#SPJ11
C + 2ZnO → 2Zn + CO2 How many moles of CO2 will be produced if 0.38 mole of ZnO is completely reacted?
If 0.38 mole of ZnO is completely reacted, 0.19 mole of CO2 will be produced.
From the balanced chemical equation:
1 mol of C + 2 mol of ZnO → 2 mol of Zn + 1 mol of CO2
This means that for every 2 moles of ZnO reacted, 1 mole of CO2 is produced. Therefore, we can use the following proportion:
2 mol ZnO : 1 mol CO2
x mol ZnO : y mol CO2
where x is the amount of ZnO we have (0.38 mol) and y is the amount of CO2 produced that we want to find.
Solving for y, we have:
2 mol ZnO : 1 mol CO2
0.38 mol ZnO : y mol CO2
y = (0.38 mol ZnO) x (1 mol CO2 / 2 mol ZnO) = 0.19 mol CO2.
Learn more about chemical equation here:
https://brainly.com/question/28294176
#SPJ1
true or false: in terms of the percentage of alcohol content by volume, one ounce of whiskey has more alcohol than one ounce of wine.
More wine can be consumed because it has less alcohol than whisky. Wine normally has an alcohol content between 12% and 14%, however, whisky can have anywhere between 40% and 50%. The given statement is true.
Alcohol by volume, also known as ABV, is the proportion of ethanol in a particular volume of liquid. The international unit of measurement for alcohol concentration is the ABV. Unfortified wine has an average alcohol by volume (ABV) of 11.6%, with a range of roughly 5.5% to 16%.
Whisky undergoes fermentation in charred white oak wood to produce its distinct flavor. Whisky ceases aging once it is removed from the casks and bottled. About 40% of good whisky is alcohol.
To know more about alcohol, visit;
https://brainly.com/question/31868718
#SPJ12
Endothermic and Exothermic Activity
For this assignment, you will create your own potential energy diagrams for each of the three chemical reactions. Then you will analyze the data and your diagrams for each reaction.
Generic Reactions Reactants Products Transition State
Synthesis
A + B → AB A + B −15 kJ AB 20 kJ 30 kJ
Single Replacement
C + AB → CB + A
C + AB 65 kJ CB + A 30 kJ 85 kJ
Double Replacement
AB + CD → AD + BC AB + CD 10 kJ AD + BC 60 kJ 75 kJ
To assist you, use the enthalpy values in the data chart for each generic reaction provided. Be sure to following the summary of steps below.
• Illustrate the x- and y-axes to show the reaction pathway and potential energy, in kilojoules. Ensure your energy intervals are appropriate for the data.
• Plot the enthalpy values of the reactants, products, and transition state using three horizontal dotted lines across the graph for each.
• Draw the energy curve from the reactants line to the transition state and curve the line back down to the energy of the products. Label the reactants, products, and transition state.
• Illustrate double-headed arrows to represent both the total change in enthalpy (ΔH) and the activation energy (Ea).
• Calculate the total change in enthalpy and the activation energy using the energy values provided for each reaction. Record those values below the graph.
• Make sure correct units are included.
Conclusion Statement
Write a two to four sentence conclusion statement explaining how the potential energy diagram is used to identify if the reaction is endothermic or exothermic, if heat was released or absorbed, and why the sign of enthalpy change was positive of negative. There should be a conclusion statement for each graph.
need asap
The potential energy diagram for the single replacement reaction shows that the reactants have a higher energy than the transition state, and the products have a lower energy than the transition state.
Given the three chemical reactions as:
1. generic reactions : synthesis A+B-->AB
reactants: A+B -15kJ
products: AB 20kJ
Activation Energy: 30kJ
2. generic reactions: single replacement C+AB-->CB+A
reactants: C+AB 65kJ
products: CB+A 30kJ
activation energy: 85kJ
3. generic reactions: double replacement AB+CD =AD+BC
reactants : AB+CD 10kJ
products: AD+BC 60kJ
activation energy: 75kJ
The diagrams given shows the basic potential energy diagrams for an endothermic (A) and an exothermic (B) reaction along with the enthalpy change (ΔH) which is positive for an endothermic reaction and negative for an exothermic reaction.
The potential energy diagram for the synthesis reaction shows that the reactants have a lower energy than the transition state, and the products have a higher energy than the transition state. This indicates that the reaction is endothermic, as heat is being absorbed, and the sign of the enthalpy change is positive. The activation energy is the difference between the reactants and the transition state, and the total change in enthalpy is the difference between the transition state and the products.
To learn more about enthalpy click here https://brainly.com/question/3298339
#SPJ1
how many nitrate ions are present in the following aqueous solution? 6.68 l of a solution containing 6.35 x 1021 formula units of lithium nitrate per liter.
There are 3.81 x 10²⁴ nitrate ions present in 6.68 L of a solution containing 6.35 x 10²¹ formula units of lithium nitrate per liter.
Mass of one formula unit (MW) = Molar mass of the compound / Avogadro's number.
Number of moles (n) = Number of formula units / Avogadro's number.
Number of ions = Number of moles × Number of ions per formula unit.
Number of ions = Number of formula units × Number of ions per formula unit / Avogadro's number.
Volume of solution (V) = 6.68 L.
Mass of lithium nitrate (m) = Number of formula units × Mass of one formula unit.
Molar mass of lithium nitrate (MW) = Mass of lithium nitrate / Number of formula units.
MW = 29.95 + 14.01 + 48 = 91.96 g/mol.
MW = 91.96 g/mol.
Number of moles (n) = 6.35 x 10²¹ / 6.022 x 10²³.
n = 1.054 x 10⁻³ mol/L.
Number of ions per formula unit = 3.
Number of ions = 6.35 x 10²¹ × 3 / 6.022 x 10²³.
Number of ions = 3.21 x 10⁻² mol/L.
Ions in 6.68 L of the solution = 6.68 L × 3.21 x 10⁻² mol/L.
Number of ions in 6.68 L of the solution = 3.81 x 10²⁴ ions.
For more such questions on lithium nitrate, click on:
https://brainly.com/question/11512972
#SPJ11
) H₂C=CH₂ H₂ Ni
What is the reaction scheme
Based on the presence of hydrogen gas (H₂) and nickel (Ni), it is possible that this is a hydrogenation reaction in which the double bond in H₂C=CH₂ is converted to a single bond.
What is a hydrogenation reaction?Hydrogenation is a chemical reaction in which hydrogen gas (H₂) is added to a molecule, typically an unsaturated organic compound, to form a saturated molecule. The reaction is usually catalyzed by a metal catalyst, such as nickel or palladium, and typically occurs at high pressure and temperature.
The addition of hydrogen atoms to an unsaturated molecule, such as an alkene or alkyne, can convert it to a saturated molecule, such as an alkane. This process is widely used in the food industry to convert unsaturated fats and oils into saturated fats and oils, which have a longer shelf life and are more stable at high temperatures.
The balanced equation for this reaction is:
H₂C=CH₂ + H₂ → H₃C-CH₃
This reaction is an example of an addition reaction, where atoms or molecules are added to the reactant molecule to form a product.
Learn more about hydrogenation here:
https://brainly.com/question/14236890
#SPJ1