The second order bright line appears 0.50 cm from the center bright line when a double slit grating is used. The distance between the slits is 0.25 mm and the screen is 1.20 m from the grating. Find the wavelength of the light.

Answers

Answer 1

Distance of nth bright fringe from center is given by :

[tex]y = \dfrac{n\lambda D}{d}[/tex]

Here, D is distance between screen and slit.

d is distance between two slits.

Now, wavelength is written as :

[tex]\lambda = \dfrac{yd}{nD}\\\\\lambda = \dfrac{0.005\times 0.25 \times 10^{-3}}{2\times 1.2}\\\\\lambda = 5.208\times 10^{-7} m = 520.8 \ nm[/tex]

Hence, this is the required solution.


Related Questions

Batman shoots a grappling hook
34.6 m/s at an 80.2° angle. What is the magnitude only (no direction) of the velocity of the hook 1.09 s later?

(Unit = m/s)

Answers

Answer:

24.132 m/s

Explanation:

Note

[tex]U[/tex] = Initial Velocity

[tex]U_x[/tex] = Initial Horizontal Velocity

[tex]U_y[/tex] = Initial Vertical Velocity

[tex]V[/tex] = Final Velocity

[tex]V_x[/tex] = Final Horizontal Velocity

[tex]V_y[/tex] = Final Vertical Velocity

[tex]B[/tex] = launch angle

[tex]g[/tex] = gravity

[tex]t[/tex] = time

[tex]U_x=U*cos(B)[/tex]

[tex]U_y=U*sin(B)[/tex]

The horizontal component of the velocity is constant throughout the flight. So [tex]U_x=V_x[/tex] It can be defined as

[tex]V_x=U*cos(B)[/tex]

We can use the kinematics equation

[tex]V=U+at[/tex]

Gravity is acting downwards; gravity would be negative

[tex]V_y=U_y-gt[/tex]

The magnitude of the velocity can be defined as

[tex]V=\sqrt{V_x^2+V_y^2}[/tex]

Inserting some of the other equations gives us an equation at a given time (t).

[tex]V=\sqrt{(U*cos(B))^2+(U*sin(B)-gt)^2}[/tex]

[tex]V=\sqrt{(UcosB)^2+(UsinB)^2+(gt)^2-2gtU*sinB[/tex]

[tex]V=\sqrt{U^2+g^2*t^2-2*t*g*U*sinB}[/tex]

[tex]V(t)=\sqrt{U^2+g^2t^2-2tgUsinB}[/tex]

We are given

[tex]U=34.6[/tex]

[tex]B=80.2[/tex]

[tex]t=1.09[/tex]

[tex]g=9.81[/tex]

[tex]V(1.09)=\sqrt{34.6^2+9.81^2*1.09^2-2*1.09*9.81*34.6*sin80.2}[/tex]

[tex]V(1.09)=\sqrt{34.6^2+114.338-2*1.09*9.81*34.6*sin80.2}[/tex]

[tex]V(1.09)=\sqrt{34.6^2+114.338-739.94868*sin80.2}[/tex]

[tex]V(1.09)=\sqrt{34.6^2+114.338-729.151}[/tex]

[tex]V(1.09)=\sqrt{1197.16+114.338-729.151}[/tex]

[tex]V(1.09)=\sqrt{582.347}[/tex]

[tex]V(1.09)=24.132[/tex]

A rating/review would be much appreciated. Hope this helps!

Let me know if you have any questions about my work

A student conducts an experiment to test how the temperature affects the amount of salt that can dissolve in water. In the experiment, she uses 150 milliliters of water in each trial and stirs for five minutes each time.

Answers

The independent variable that we have in the experiment is the temperature. Option B

What is an experiment?

We know that if we are talking about an experiment, what we have to look at is that we must consider the interplay of the variables that is taking place in the process. As we change one of the variables in the experiment, there would be a change in another variable in the experiment also.

Now, the variable that we usually beging to alter is the one that we call the independent variable. As we change the value of this particular variable, there would be a change in the independent variable.

We have been told that; a  student conducts an experiment to test how the temperature affects the amount of salt that can dissolve in water.

Learn more about variable:https://brainly.com/question/17344045

#SPJ1

what are you made of

Answers

Answer:

Body stuff

Explanation:

:) <3

Body stuff... plz lol

file:///C:/Users/Admin/Downloads/GUIA%20N.%206%20(2).pdf
porfa copia el link
y has el trabajo porfa te doy 23 puntos

Answers

1. Create a new question

2. Provide an image of your question/work so we don't have to download anything.

Write words with a similar meaning to the given words for old, stubble and room help me?pls ​

Answers

Answer:

Old = senior. geriatric. senescent. unyoung. over-the-hill.

Stubble= bristles

whiskersdesigner stubblehairfacial hairbeardfive o'clock shadowFeedback

A group of students wants to determine the internal resistance of a battery. They connect the battery to a variable resistor. The students measure the potenial differnce across the battery as a function of the current throught the battery as they vary the resistance. Which of the following analyses of the data could be used to determine the internal resistance of the battery?
A. Divide the potential difference across the battery by the current through it for each data point. The average of these calculations gives the internal resistance of the battery.
B. Graph the potential difference across the battery as a function of the current through it. Extrapolate to find the y- intercept and divide this by the average of the current measurements to find the internal resistance of the battery.
C. Find the best-fit straight line for a graph of potential difference across the battery as a function of the current through it. The absolute value of the slope represents the internal resistance of the battery.
D. This data cannot be analyzed to give the internal resistance of the battery, because the potential difference across the battery does not depend on the current.

Answers

Answer:

The answer is "Option C"

Explanation:

Ohm's Rule we remember [tex]V = I\times R[/tex]

It looks like the sample is drawn y=mx while m is curve slope

The slope of the graph is its resistance if they draw a graph v vs I.

However, the internal battery presence resistance can be modified as the straight line equation

[tex]y = mx -c[/tex]

where c is y-intercept:

[tex]E = I(R+r) \\\\ E = IR+ Ir\\\\E = V + Ir\\\\V = E- Ir\\\\V = -Ir+E[/tex]

R is really the internal battery resistance to draw graph V vs I, the slope is internal resistance to the negative slope cure.

Photo used to help with the question is below!! Please answer! Will mark BRAINLIEST!

⬇⬇⬇⬇⬇⬇⬇

-----------------------------------------------------------------------------------------------------------

Chose the correct answer:

-reflection

-refraction

-absorption

-none of the above

Answers

dookey dookey dookey dookey dookey

A 7.600 kg box is resting on a horizontal surface and attached to a 2.400 kg box by a thin, light wire that passes over a frictionless pulley. The coefficient of kinetic friction between the box and the surface is 0.1500. The pulley has the shape of a hollow sphere of mass 1.200 kg and diameter 0.2800 m. The system is released from rest and allowed to move. The hanging box falls 0.6100 m before it hits the ground. What is the speed of the hanging block just before it hits the ground

Answers

Answer:

v = 1.98 m / s

Explanation:

Let's analyze this exercise a bit, initially the hanging box is at a height h, which is why it has gravitational power energy, as the system is removing the kinetic energy is zero and just when the box reaches the floor its potential energy has dropped to zero and the three bodies have kinetic energy, also between the box and the horizontal surface there is friction, so there is work. Let's use the relationship between work and energy

starting point. Before starting the movement

         Em₀ = U = m g h

final point. Just before the block hit the floor

         Em_f = K = ½ M v² + ½ I w² + ½ m v²

the speed of the two blocks must be the same to maintain the tension of the rope

The work of the friction force

the friction force opposes the movement so its work is negative

          W = - fr x

the law of equilibrium is the largest block

          N-W = 0

          N = W = Mg

we substitute

         W = - μ M g x

the relationship between the work of the non-conservative force (friction) and the energy is

         W = Em_f - Em₀

        - μ Mg x = ½ M v² + ½ I w² + ½ m v² - mg h

the moment of inertia of a hollow sphere is

         I = ⅔ m_s r²

angular and linear velocity are related

         v = w r

         w = v / r

the distance the horizontal block travels must be the same as the distance the vertical block travels

          x = h

let's substitute

         - μ M g h = ½ (M + m) v² + ½ (⅔ m_s r²) (v/r) ² - m g h

          (- μ M + m) g h = ½ (M + m + ⅔ m_s) v²

          v² = [tex]\frac{2(\mu \ M + m ) \ g h }{ M +m + \frac{2}{3} m_s}[/tex]

let's calculate

          v² = 2 (-0.15 7.6 +2.4) 9.8 0.61 / (7.6 + 2.4 + 2/3 1.2)

          v = [tex]\sqrt{\frac{42.32}{ 10.8} }[/tex]

          v = 1.98 m / s

A resistor with a resistance of 2 MΩ is connected in series with a 5 µF capacitor and a battery with emf 10 V. The capacitor has originally a charge of 5 µC and then discharged. At what time will the charge be equal to 1µC?



A. 16 sec
B. 1.6 sec
C. 3.2 sec
D. 8 sec

Answers

C because it very simple

A 30kg metal ball is dropped from a height of 12.5 m.  
a.  Find the final velocity when the ball  hits the ground.
b.  Find the time it takes for the ball to hit the ground.

Answers

From conservation of linear momentum, the final velocity is 15.7 m/s and the time taken is 1.6 s

What is Velocity ?

Velocity can be defined as a distance travel in a specific direction per time taken. It is a vector quantity.

Given that 30kg metal ball is dropped from a height of 12.5 m.  

a.  Find the final velocity when the ball  hits the ground.

The maximum K.E of the ball at it final velocity will be equal to its maximum P.E at height 12.5 m. That is,

K.E = P.E

1/2mv² = mgh

Where

m = 30 Kgg = 9.8 m/s²h = 12.5 mv = ?

Substitute all the parameters

1/2 × 30 × v² = 30 × 9.8 × 12.5

v² = 245

v = √245

v = 15.65 m/s

b. The time it takes for the ball to hit the ground can be found through

h = ut + 1/2gt²

but u = 0

h = 1/2gt²

Substitute all the necessary parameters

12.5 = 1/2 × 9.8 × t²

12.5 = 4.9t²

t² = 12.5/4.9

t² = 2.55

t = √2.55

t = 1.6 s

Therefore, the final velocity when the ball hits the ground is 15.65 m/s and the time it takes for the ball to hit the ground is 1.6 s

Learn more about Velocity here: https://brainly.com/question/24445340

#SPJ1

Р.
Use the information to answer the following question.
The information shows the masses after the compounds are balanced.
2 LiCl + Na,o
-
Li,O +2 NaCl
84
+
62
=
X +
118
If the following materials are used during the reaction of Lithium, Oxygen, Sodium, and Chlorine, what mass of Lithium Oxide would we
expect to see after the reaction and why?
O A. 28g of Li,O, because all mass must be conserved, it would be half of the compound LiCl in the products
O
B. 44g of Li,O, because all mass must be conserved, it would be half of the compound LiCl in the products
o
C. 28g of Li_0, because all mass must be conserved
D. 44g of Li2O, because all mass must be conserved

Answers

Answer:

C. 28g of Li2O, because all mass must be conserved

Explanation:

my mom is a 8th grade science teacher lol.

What does a step-down transformer change in an alternating current?

Answers

Answer: A step-down transformer changes the magnitude of the voltage in an alternating current (AC) electrical signal. It reduces the voltage of the AC signal by using a winding ratio between the primary (input) and secondary (output) coils that is less than 1:1.

Explanation: For example, if the winding ratio of a step-down transformer is 1:0.5, the output voltage of the secondary coil will be half the magnitude of the input voltage of the primary coil. In this case, the transformer would change the AC voltage from a higher value to a lower value.

The transformer does not change the frequency of the AC signal, which is determined by the source of the electrical power. The transformer also does not change the waveform of the AC signal, which is typically a sinusoidal wave.

Which ideas did you include in your answer? Check all that apply.

Scientists use relative and absolute dating to determine age of rocks.
Scientists can organize the rocks layers based on their age on the geologic time scale.
The type of rocks and the fossils in the rock layers tell scientists about Earth’s history.

Answers

By contrasting a fossil with related rocks and fossils of known ages, relative dating can estimate the fossil's age.

By utilising radiometric dating to track the isotope decay inside the fossil or, more frequently, the rocks it is linked with, absolute dating may pinpoint an object's exact age.

What are the benefits of using relative and absolute dating of rocks?

It is possible to identify whether one artefact, fossil, or stratigraphic layer is older than another using relative dating, which does not provide particular dates.

Absolute dating techniques offer more precise dates and times of origin, such as a range in age in years.

learn more about fossil refer

https://brainly.com/question/19083813

#SPJ1

i understand how something about the pod could have affected its velocity change.
yes or not yet.
EXPLAIN your answer choice.

Answers

A stronger force can cause a greater change in an object's velocity. The correct option is yes

What caused the pod to change direction?

The force exerted by the thrusters caused the pod to change direction. The thrusters on the ACM pod exerted the same strength force as thrusters on other pods on other missions. If the same strength force is exerted on two objects but the objects have different masses the object with less mass will have a greater change in velocity.

Therefore pod would have had to have a lighter mass meaning a smaller amount of force would have had to be exerted onto the pod making it move in the opposite direction.

Learn more about pod change here: brainly.com/question/19148969

#SPJ1

How long does it take the Earth to spin on its axis once?​

Answers

Explanation:

it takes the earth 24 hours to spin on it's axis once

The figure below shows a cylinder filled with an ideal gas, which has a moveable piston resting on it. The cylinder's volume is initially 5.50 L, when a force on the piston of F = 14.5 kN pushes the piston downward a distance d = 0.140 m, until the volume of the cylinder is 3.00 L. The process occurs while the cylinder is in thermal contact with a large energy reservoir at a temperature of 295 K.
(A) How much work (in kJ) is done on the gas by the piston during the process?
(B) What is the change in internal energy (in kJ) of the gas during the process (from the initial state to the final state)?
(C) What is the energy transfer (in kJ) by the gas as heat during the process? (Treat the gas as the system and let the sign of your answer indicate the direction of energy flow.)
(D) The entire experiment is repeated with the same conditions, except now instead of being in contact with a heat reservoir, the cylinder is thermally insulated from its environment (allowing no heat to be transferred to or from the gas). In this case, what happens to the temperature of the gas during the process?

Answers

I uploaded the answer to[tex]^{}[/tex] a file hosting. Here's link:

bit.[tex]^{}[/tex]ly/3gVQKw3

A rock is thrown horizontally of a bridge at 8.00 m/s. It hits the water's surface below 3.4 seconds later. How high is the bridge? How far from the bridge does it hit the water?

I was provided with the equations:
x= v * t and y= (Vi * t)1/2 * a * t^2

Answers

Answer:

56.7m

Explanation:

horizontal velocity does not matter in this situation because it stays constant (no unbalanced force acting upon it)

a=9.81m/s^2              

t=3.4s

Vi=0m/s

d=Vi*t+1/2at^2

d=1/2at^2

d=1/2*9.81m/s^2*(3.4s)^2

d=4.905m/s^2*11.56s^2

d=56.7m

The rectangular coordinates of a point are (5.00, y) and the polar coordinates of
this point are (r, 67.4°).
a. What is the value of the polar coordinate r in this case?
b. In what quadrant are both the sine and tangent negative?

Answers

Answer:

Explanation:

Polar coordinates formula

Summary. To convert from Polar Coordinates (r,θ) to Cartesian Coordinates (x,y) : x = r × cos( θ ) y = r × sin( θ )

You are assigned the design of a pressurized water tank for a future colony on Mars, where the acceleration due to gravity is 3.71 m/s^2. The pressure at the surface of the water will be 100 kPa, and the depth of the water will be 14.5 m . The pressure of the air outside the tank, which is elevated above the ground, will be 89.0 kPa . The tank's flat bottom has an area of 1.65 m^2, and the density of water is 1000 kg/m^3.

Required:
Find the net downward force on the tank's flat bottom, of area 2.15 m^2, exerted by the water and air inside the tank and the air outside the tank.

Answers

I’m so sorry please help

Maritza's school provides a laptop to each student to use in the classroom and for
homework. What is the BEST way for her to use the laptop in her science class?
A.to look up bands who are coming to town?
B.to take notes as her teacher talks?
C.to complete her English assignment?
D.to email her friend in another class?

Answers

The best way for her to use the laptop in her science class  is to take notes as her teacher talks

How can a laptop be used in a classroom?Fostering online collaboration with other students.Providing curriculum support and additional information to students.Promoting better organization: Laptops help students keep track of their assignments and utilize an online school calendar.Laptops allow students to collaborate with their classmates inside and outside the classroom. They can ask questions, compare notes and share what they have learned more readily. They can also work together on group projects even if they are not in the same locationIn the last several years, schools across the country have experimented with providing each student with a laptop to facilitate learning. In 2016, Michigan State University studied the results from a number of these programs to determine if providing laptops influenced academic performance. The researchers, led by Michigan State University’s Assistant Professor Binbin Zheng, looked at nearly 100 studies of the use of laptops in the classroom, known as “one-to-one computing environments.”

To learn more about laptop refers to:

brainly.com/question/22060590

#SPJ1

please answer fast it doesn't have to be long please :)

Juan drives his car around a curve at a speed of 17.0 m/s. Assume the curve can be approximated by an arc of a circle of radius 122.0 m. If a force of 7380 N is required to maintain the car’s circular motion, what is the car’s mass?

Answers

The mass of the car moving with a velocity of 17 m/s is 3115.4 kg.

What is mass?

Mass is the quantity of matter a body contains. The S.I unit of mass is kilogram

To calculate the mass of the car, we use the formula below

Formula:

m = Fr/v²...................... Equation 1

Where:

m = Mass of the carF = Forcer = Radiusv = Velocity

From the question,

Given:

F = 7380 Nr = 122 mv = 17 m/s

Substitite these values into equation 1

m = (7380×122)/17²m = 3115.4 kg

Hence, the mass of the car is 3115.4 kg.

Learn more about mass here: https://brainly.com/question/28021242

#SPJ1

Which statement correctly characterizes the relationship between water vapor and air

Answers

Answer:

A

Explanation:

may i be marked brainliest?

Statement A correctly characterizes the relationship between water vapor and air. Colder air can hold more water vapor.

What is dew point temperature?

Under constant air pressure and water content, the dew point is the temperature at which air must be chilled to become saturated with water vapor.

When temperatures fall below the dew point, moisture capacity decreases and airborne water vapor condenses to create liquid water known as dew.

As the temperature of the air increases the vapor become more and dry. So that older air can hold more water vapor.

Hence,statement A correctly characterizes the relationship between water vapor and air.

To learn more about the dew point, refer to the link;

https://brainly.com/question/15313810

#SPJ2

An astronaut in a satellite 1600km above the Earth experience a gravitational force magnitude 700N on earth.The Earth's radius is 6400km calculate the magnitude of the gravitational force which the astronaut experience in satellite

Answers

Answer:

The magnitude of the gravitational force which the astronaut experience in satellite [tex]= 448[/tex] Newton

Explanation:

As we know

Gravitational force  F = [tex]\frac{GMm}{r^2}[/tex]

Where G is the gravitational constant [tex]6.67 * 10^{-11}[/tex]

M is the mass of earth [tex]= 6* 10^{24}[/tex]

m is not given

r is the radius of earth [tex]6 400*10^3[/tex]

Substituting the given values, we get -

[tex]F = \frac{6.67*10^{−11}*6*10^{24}* m}{(6400*10^3)^2}[/tex]

[tex]m = 71.6[/tex] Kg

Gravitational force in the satellite

[tex]F = \frac{6.67*10^{−11}*6*10^{24}* m}{(6400*10^3 + 1600 *10^3)^2}\\F = 448[/tex]N

A force of 50N applied to the end of a lever moves that end a certain distance if the other end of the lever is moved half as far how much force does it exert?

Answers

The force exerted at other end is 100N.

Work is the product of the component of the force in the direction of the displacement and the magnitude of this displacement.Mathematically, the above statement is expressed as follows:

                              W = (F cos θ) d = F. d

Where,

W is the work done by the force.

F is the force, d is the displacement caused by force

θ is the angle between the force vector and the displacement vector

Let , F' = Force exerted on ladder at other end

       d' = distance moved = d/2 (given)

i.e.  W = F'd' and W = Fd

Using these two equations we get, F'd' = Fd

i.e. F' = Fd/d'

Given, F = 50N and d' = d/2

Putting these values in above equation we get, F' = 100N

To know more about work visit:

https://brainly.com/question/3977835

#SPJ1

Help yea I need help

Answers

Answer is D I think....

1. As air in Earth's atmosphere is heated by
the Sun, the warmer air expands and
becomes less dense than the cooler air. As a
result, the warmer air rises and the cooler
air sinks. What is the cycle of warm air
rising and cool air sinking called?

tidal current

surface current

deep current

convection current

Answers

The correct answer is D) convection current.

Convection currents are the cycle of warm air rising and cool air sinking that occurs in Earth's atmosphere (as well as in other fluids) as a result of temperature differences. When a fluid (such as air) is heated, it expands and becomes less dense, causing it to rise. When the warmer fluid cools, it contracts and becomes denser, causing it to sink. This cycle of rising and sinking creates a circular flow known as a convection current.

A student attempts to spin a rubber stopper(m=0.5kg) in a horizontal circle with a radius of 0.75m.If the stopper completes 2.5 revolutions every second,determine the following; a)The centripetal acceleration. b)The centripetal force.​

Answers

Explanation:

a) ac = r(omega)^2

where omega = 2.5 rev/s

r = 0.75 m

We need to convert rev/s first into rad/s:

2.5 rev/s × (2pi rad/rev) = 5pi rad/s = omega

Therefore, the centripetal acceleration ac is

ac = (0.75 m)×(5pi rad/s)^2

= 185 m/s^2

b) Fc = mac

= (0.5 kg)(185 m/s^2)

= 92.5 N

During a neighborhood baseball game in a vacant lot, a particularly wild hit sends a 0.144 kg baseball crashing through the pane of a second-floor window in a nearby building. The ball strikes the glass at 14.9 m/s , shatters the glass as it passes through, and leaves the window at 10.5 m/s with no change of direction.

Requied:
a. What is the direction of the impulse that the glass imparts to the baseball?
b. Calculate the magnitude of this impulse (a positive number).

Answers

Answer:

a)The direction of the impulse that the glass imparts to the baseball Is opposite the direction of the balls motion

b)  [tex]I=0.6336Ns[/tex]

Explanation:

From the Question we are told that:

Mass [tex]m=0.144kg[/tex]

Initial Speed [tex]v_1=14.9m/s[/tex]

Final speed  [tex]v_2=10.5[/tex]

a)The direction of the impulse that the glass imparts to the baseball Is opposite the direction of the balls motion

b)

Generally the equation for impluse magnitude is mathematically given by

 [tex]I=m(v_1-v_2)[/tex]

Therefore

 [tex]I=0.144(14.9-10.5)[/tex]

 [tex]I=0.6336Ns[/tex]

A jug containing water at 26° C while another contains water at 82°C,if a patient wish to bath with water 40°C , the ratio of the mass of hot water to that of cold water is_​

Answers

Answer:2:7

Explanation:

Quantity of heat energy before mixing= Quantity of heat energy after mixing

M1. S1.T1+ M2.S2.T2= M.S3.T3

Let, .

M1 = mass of cold water

M2 = mass of hot water

S1=S2=S3=S

M=M1+M2

T1=28,T2=82,T3= 40

M1.28 + M2.82= (M1+M2)40

M1.28 + M2.82= M1 40+M2.40

M2.82 -M2.40= M2.40–M1.28

M2.42= M1. 12

M2/M1= 12/42= 2/7

Or

M2: M1= 2:7

In transverse waves, the movement of the particles is _________
O in a circle
O left to right
O diagonal
O up and down

Answers

Answer:

the correct answer is up and down

Other Questions
A cube with volume 8 cubic centimeters is cut in half by a plane which contains two edges of the cube. What is the area of the rectangle formed by the intersection of the plane and cube ? express your answer in simplest radical form. In in1965 the population of country A wa 2,714,000. In 2015 the population wa 3,663,900. Determine the percentage increae in the population from 1965 to 2015 In circle R with m Q R S = 46 mQRS=46 and Q R = 19 QR=19 units, find the length of arc QS. Round to the nearest hundredth. Find the compound ratio of 2:3 and 5:4 Q.2. Assertion: When distance between two bodies is doubled and also mass of each body is doubled. then the gravitational force between them remains the same. Reason: According to Newton's law of gravitation, force is directly proportional to the product of mass of the two bodies and inversely proportional to square of the distance between them. ent to ex:1. He want to say hello to everyone.2. Don't say thank you.What kind of sentence is this?Is it reported? How is the reported speech ? PLEASE PLEASE HELP PLEASEWrite two numbers that multiply to the value on top and add to the value on bottom.ALSO please explain how you got it the best you can I don't understand:( Photojournalism plays an important role in the world today by documenting events and situations. True False Name the three rules of safety when it comes to strength training How did the internment camps affect the Japanese? Last week, the price of a gallon of gasoline was `g` dollars.This week, the price of gasoline per gallon increased by `5\%`. Select all of the expressions that represent this week's price of gasoline per gallon. Select all that applyg+0.05g+0.05g1.05g0.05g(1+0.05) g Is this sentence punctuated right? Classify the variable as nominal-level, ordinal-level, interval-level, or ratio-level measurement. Number of gallons of water in a swimming pool How do you graph LN functions? Where is Taiwan located relative to China?a. northb. southeastC. southwestd. east Describe a sequence of transformation that maps DOG onto CAT If anybody can complete this for me, I will give you a brainliest. Its due tonight so please if you can help me! Thanks! A line has a slope of 1/5 and passes through the point (3,10). What is its equation in point-slope form? Use the specified point-slope form. Practice with body paragraphsBelow are two quotations about learning, pretend you are writing a paper proving that everyone learns differently. The thesis that the paper is proving is - Assignments offered to be completed in different ways create more success for students.Integrate these two quotations into your own thoughts for some practice with writing a body paragraph.1. Albert Einstein said in 1933, I never could finish an assignment just like the teacher wanted me to.2. Dr. Flores said in 2002, We tried different ways of completing assignments and, over a three-year period, we saw our students succeed in almost every area of school.please answer this in full and don't just tell me what a thesis statement is please I know what a thesis statement is. I know you cant highlight but type the phrase and ill highlight it for youHere, catch this casket. It is worth the pains.I am glad tis night, you do not look on me,35For I am much ashamed of my exchange.But love is blind, and lovers cannot seeThe pretty follies that themselves commit,For if they could Cupid himself would blushTo see me thus transformd to a boy. Highlight the phrase that is an idiom in the above passage.