Answer:
Allison walks 5 blocks west and 3 blocks south.
Explanation:
Vectors have both magnitude and direction. The attached figure shows the graph of Allison’s walk to school. She follows the black vectors to get to her school.
The first vector on the horizontal axis points towards west and there are 5 blocks. Initially, she walks 5 blocks in west direction.
The second vector points in the negative vertical axis. It means that she walks 3 block in south direction.
Hence, the correct option is (D) i.e. Allison walks 5 blocks west and 3 blocks south.
Which of the outer planets is MOST like Earth? How?
Answer:
venus
Explanation:
hope i helped
brainliest pls pls pls
-Zylynn
Answer: I would say that Saturn is most like Earth. Not only does it have moons, like Earth, but the atmosphere is also denser like Earth. It also has windstorms, granite they are much more intense than Earth’s, but they do indeed happen. Saturn also has hydrogen gas; this gas is here on Earth supporting life in our ocean. Therefore, there is a chance that the conditions on Saturn could provide the essentials for there to be life.
Potassium hydrogen tartrate is an acid used in making cookies such as snicker doodles. (In your home, it is called cream of tartar.) It can be titrated with a base such as KOH to determine purity. A sample of 0.500 g is titrated to a pink endpoint with 21.58 mL of 0.1125 M KOH. Determine the percentage of potassium hydrogen tartrate (KHC4H4O6) in the sample. The acid/base ratio is 1:1.
Answer:
91.4%
Explanation:
Potassium hydrogen tartrate, KHT, reacts with KOH as follows.
KHT + KOH → H₂O + K₂T
where 1 mole of acid (KHT) reacts per mole o base (KOH), -That is acid/base ratio 1:1
The endpoint of a titration is the point in which moles of KOH = moles of KHT, you can see this endpoint with an indicator or doing a potentiometric titration.
As the endpoint requires 21.58mL = 0.02158L of a 0.1125M KOH, moles of KOH = moles of KHT are:
0.02158L × (0.1125mol / L) = 2.428x10⁻³ moles of KOH = moles of KHT
To convert these moles to grams you use molar mass of KHT (188.177g/mol):
2.428x10⁻³ moles of KHT × (188.177g / mol) = 0.457g of KHT are in the sample.
As you add 0.500g of sample, percentage of KHT in the sample is:
(0.457g / 0.500g) × 100 =
91.4%-That is the purity of the sample-
what kind of a compounds act as an electrolyte? explain with and example
Answer:
ionic compounds
Explanation:
just finished ap chem
Answer:
An ionic compound can act as an electrolyte. This is because an electrolyte should allow charges to travel inside it.
e.g = H2SO4, NaCl
Explanation:
Which scenario would result in a decrease in population size, or a negative population growth? Use this formula: population growth = (birth rate + immigration) – (death rate + emigration) 0 individuals emigrate, 14 individuals die, 14 individuals are born, 14 individuals immigrate 40 individuals emigrate, 0 individuals die, 10 individuals are born, 28 individuals immigrate 12 individuals emigrate, 5 individuals die, 17 individuals are born, 0 individuals immigrate 19 individuals emigrate, 4 individuals die, 25 individuals are born, 0 individuals immigrate
Answer:
B) 40 individuals emigrate, 0 individuals die, 10 individuals are born, 28 individuals immigrate
Explanation:
its right on edg2020 :)
A chemist is identifying an unknown solid substance that appears purple in color. Upon close inspection with a hand lens, she notices tiny grains in the substance. Some of the grains are blue; other grains are red. Based on this information, the substance is most likely a \
The question is incomplete, the complete question is;
A chemist is identifying an unknown solid substance that appears purple in color. Upon close inspection with a hand lens, she notices tiny grains in the substance. Some of the grains are blue; other grains are red. Based on this information, the substance is most likely a
a. Compound
b. Homogeneous Mixture
c. Pure substance
d. solution
e. heterogeneous mixture
Answer:
heterogeneous mixture
Explanation:
A heterogeneous mixture simply means a mixture of two different substances. If two substances are the same, they are expected to have the same colour or appearance.
We were told in the question that the colour of the mixture appeared purple. On close examination, the sample was found to comprise of two different substances of different colours; blue and red.
If there are two substances of different colours present in the sample, it then follows that the sample is a heterogeneous mixture.
An antacid tablet has a pH of about 9.5 which
means it is considered to be in the _____
range.
Acidic or basic
Answer:
Basic
Explanation:
The pH scale is a scale that tells us about the concentration of hydrogen ions in a solution.
Acids have many hydrogen ions. Acids have a pH of less than 7.
Bases have fewer hydrogen ions and more hydroxide ions. Bases have a pH of less than 14.
If the solution has a pH of exactly 7, then it is pure water. Water has the same concentration of hydrogen and hydroxide ions.
The antacid tablet has a pH of roughly 9.5 Since this is less than 14, but not equal to or less than 7, this must be an base. Therefore, it is considered to be in the basic range.
Answer:
9.5 is a base
Explanation:
A ph of less than 7 is an acid
7 is neutral
7 to 14 is a base
9.5 is a base
how many sigma and pi bonds in propionic bond
Based on the kinetic molecular theory, which of the following statements is correct about the particles in a sample of gas at a constant temperature and
volume?
They have negligible kinetic energy
They attract each other with strong forces.
There is a lot of empty space between them.
Their net kinetic energy decreases due to collisions.
Answer:
There is a lot of empty space between them.
Explanation:
The kinetic molecular theory postulates that a substance is made up of tiny particles called molecules. The molecules of a gas are in constant random motion and collide elastically with each other. They also collide with the walls of the container.
The magnitude of intermolecular forces of attraction between gas molecules is very small. Hence gas molecules are largely apart with a lot of empty space between gas molecules.
Answer:C, There is a lot of empty space between them.
Explanation:
Epinephrine (adrenaline) is a hormone secreted into the bloodstream in times of stress. It contains 59.0% C, 7.15% H, 26.20% O, and 7.65% N and has a molar mass of 183 g/mol. What is its molecular formula
Answer:
C9H13O3N
Explanation:
Take the atomic mass of C=12.0, H=1.0, O=16.0 and N=14.0.
We can draw a chart (please view this on desktop so to avoid spacing errors):
Let the mass of Epinephrine be 100g.
C H O N
mass(g) : 59 7.15 26.2 7.65
no. of moles : 59/12 =4.9167 7.15/1 = 7.15 26.2/16=1.6375 7.65/14=0.5464
(n.o.m. = mass/molar mass)
Ratio: 4.9167/0.5464 =9 7.15/0.5464=13 1.6375= 3 0.5464/0.5464 =1
(divide the n.o.m. by the smallest n.o.m., which is 0.5464 in this case, take the whole numbers)
So, the empirical formula will be: C9H13O3N
But this is still not yet the molecular formula. We have to ensure the molar mass is 183g/mol. Multiply the empirical formula by n.
So, let the molecular formula of Epinephrine be (C9H13O3N)n.
12x9n + 1x13n + 16x3n + 14n = 183
108n + 13n + 48n + 14n = 183
183 n = 183.
n = 1
Hence, the molecular formula is C9H13O3N.
A container initially holds 5.67 x 10^-2 mol of propane and has a volume of V1. The volume of the container was increased by adding an additional 2.95 x 10^-2 mol if propane to the container, so that the container has a final volume of 1.93 L. If the temperature and pressure are constant, what was the initial volume of the container?
Answer:
Initial volume of the container (V1) = 1.27 L (Approx)
Explanation:
Given:
Number of mol (n1) = 5.67 x 10⁻²
Number of mol (n2) = (5.67 +2.95) x 10⁻² = 8.62 x 10⁻²
New volume (V2) = 1.93 L
Find:
Initial volume of the container (V1)
Computation:
Using Avogadro's law
V1 / n1 = V2 / n2
V1 / 5.67 x 10⁻² = 1.93 / 8.62 x 10⁻²
V1 = 10.9431 / 8.62
Initial volume of the container (V1) = 1.2695
Initial volume of the container (V1) = 1.27 L (Approx)
Answer: 1.27 L
Explanation:
First, calculate the final number of moles of propane (n2) in the container.
n2 = n1 + nadded = 5.67 × 10^−2 mol + 2.95 × 10^−2 mol = 8.62 × 10^−2 mol
Rearrange Avogadro's law to solve for V1.
V1 = V2 × n1 / n2
Substitute the known values of n1, n2, and V2,
V1 = 1.93 L × 5.67 × 10^−2 mol / 8.62 × 10^−2 mol = 1.27 L
A sample of a certain barium chloride hydrate, BaCl2.nH2O, has a mass of 7.62 g. When this sample is heated in a crucible, it is converted to anhydrous barium chloride and water, with the water escaping as steam during the process. The mass of the solid anhydrous residue that remains in the crucible is 6.48 g. Determine the formula of this hydrate
Answer:
BaCl2.2H2O
Explanation:
Data obtained from the question include:
Mass of barium chloride hydrate (BaCl2.nH2O) = 7.62g
Mass of anhydrous barium chloride (BaCl2) = 6.48g
Next, we shall determine the mass of water in the barium chloride hydrate (BaCl2.nH2O). This can be obtained as follow:
Mass of water (H2O) = Mass of barium chloride hydrate (BaCl2.nH2O) – Mass of anhydrous barium chloride (BaCl2)
Mass of water (H2O) = 7.62 – 6.48
Mass of water (H2O) = 1.14g
Next, we shall write the balanced equation for the reaction. This is given below:
BaCl2.nH2O —> BaCl2 + nH2O
Next, we shall determine the masses of BaCl2.nH2O that decomposed and the mass H2O produced from the balanced equation.
Molar mass of BaCl2.nH2O = 137 + (35.5x2) + n[(2x1) + 16]
= 137 + 71 + n[2 + 16]
= (208 + 18n) g/mol
Mass of BaCl2.nH2O from the balanced equation = 1 x (208 + 18n) = (208 + 18n) g
Molar mass of H2O = (2x1) + 16 = 18 g/mol
Mass of H2O from the balanced equation = n x 18 = 18n g
Summary:
From the balanced equation above,
(208 + 18n) g of BaCl2.nH2O decomposed to produce 18n g of H2O.
Finally, we shall determine the formula for the hydrated compound as follow:
From the balanced equation above,
(208 + 18n) g of BaCl2.nH2O decomposed to produce 18n g of H2O.
But 7.62g of BaCl2.nH2O decomposed to produce 1.14g of H2O i.e
18n/(208 + 18n) = 1.14/7.62
Cross multiply
18n x 7.62 = 1.14(208 + 18n)
137.16n = 237.12 + 20.52n
Collect like terms
137.16n – 20.52n = 237.12
116.64n = 237.12
Divide both side by the coefficient of n i.e 116.64
n = 237.12/116.64
n = 2
Therefore the formula for the hydrate, BaCl2.nH2O is BaCl2.xH2O.
Which is the formula mass of Na2S04?
Answer:
The formula mass of Na2S04 is 142.04 g/mol
Answer:
142.04 g/mol
Explanation:
the formula Na2SO4 means:two moles sodium (45.98g), one mile sulfur (32.06g), and four moles oxygen (64.00g) combine to form one mole of sodium surface (142.04g).
describe the smell of Na+ and H+
Answer:
Sodium ion ( Na+) is known to have no smell at all but however appears salty which is the reason why the compound Sodium Chloride has the same type of taste.
Hydrogen ions ( H+) are known to have no taste which implies it being tasteless. It is also important to note that it has no smell too when perceived (odorless).
Name the layer where the pressure is 3.5 million atmospheres:
Answer:
The Inner Core
hope it was useful
stay at home stay safe
keep rocking
pls mark me as brani
........
Describe the crystallization process as applied in salt preparation
Explanation:
The principle used in the preparation of these salts is to dissolve
the cystine in an alcoholic alkali solution to which just sufficient
water to effect solution has been added, and, after filtering from
excess cystine, to precipitate the salt by addition of a suitable
indifferent solvent. While various solvents, such as acetone,
ether, or large amounts of alcohol caused precipitations, these were
either oily or amorphous. Only acetonitrile was found to possess
the power of initiating regular crystallization in the salt solutions.
While the solutions of the different salts require different amounts
of the solvent for complete precipitation, a partial substitution of
absolute ether for acetonitrile was found expedient in the case
of the most soluble of the salts, the K salt.
Answer:
It is simply a process of forming crystal.
Explanation: When salt is heated and dissolve in the liquid mainly water then its called saturated solution. When we further add salt and increase heat in order to dissolve it then it forcibly dissolve in liquid it's called supersaturated solution. After we slowly cool down the temperature then the salt we have put in supersaturated solution arises in the form of crystal. Hence its called crystalization.
How fast do sound waves travel under normal conditions? A. 110 feet each second B. 1100 miles per hour C. 1100 feet each second D. 1100 miles each second
Answer:
110 feet each second......
I think
Answer:
110 hope its right
Explanation:
The structures found in a living cell can be compared to the parts of a factory that produces cars. Which part of the factory is most similar to the nucleus of a living cell? *
The computers that help control the machines in the factory
Which statement is true with respect to the investigation? The student investigated only the physical properties of lead. The student investigated only the chemical properties of lead. The student investigated more physical properties than chemical properties of lead. The student investigated more chemical properties than physical properties of lead.
The question is incomplete, the complete question is;
A student investigated some properties of lead and recorded the findings in the table below. Property Observation Color Dull gray Density 11.3 g/cm3 Volume of sample 3 cm3 Melting point 327°C Reaction with air Lead oxide forms on the surface Electrical conductivity Conducts some electricity Which statement is true with respect to the investigation?
A. The student investigated only the physical properties of lead.
B. The student investigated only the chemical properties of lead.
C. The student investigated more physical properties than chemical properties of lead.
D. The student investigated more chemical properties than physical properties of lead.
Answer:
The student investigated more physical properties than chemical properties of lead.
Explanation:
If we look at the things mentioned in the question as regards the approach of the student towards the study of lead, we will discover that he/studied;
Colour, density, volume, melting point and electrical conductivity which are all physical properties. Physical properties of a substance does not involve chemical reactions of the substance under study.
The only chemical property studied by the student is its formation of an oxide- lead oxide with air as follows;
2Pb(s) + O₂(g) → 2PbO(s)
Thus we can safely conclude that; the student investigated more physical properties than chemical properties of lead.
Answer:
c
Explanation:
edge 2021 :)
What's the meaning of love?
Answer: Love is when you feel like you can touch the sky when your around that person, when your at your best self or that person and when you put their needs before yours because your needs just don't matter. When you feel like you can't stop thinking about that person or you can stop smiling when you think of them. Its when you feel this warm, safe feeling when your around them. And if you really love them then my answer should be true for you.
Explanation:
because iv'e felt and have been in love before....
Answer:
Love is an intense, deep affection for another person. Love also means to feel this intense affection for someone. Love can also refer to a strong like for something or to like something a lot. Love has many other senses both as a verb and a noun
What are the ways in which quality of petrol can be improved?
Answer:
It can be improved by:
a) Adding METHANOL
b) Adding BUTANOL
c) Adding ETHANOL.
Explanation:
hope it helps.
The image shows information about the element carbon as it appears in the periodic table. Based on the image, which statement is accurate? A. A carbon atom has two protons, two neutrons, and two electrons. B. A carbon atom has three protons, six neutrons, and three electrons. C. A carbon atom has six protons, six neutrons, and six electrons. D. A carbon atom has four protons, four neutrons, and four electrons.
Answer:
C. A carbon atom has six protons, six neutrons, and six electrons.
Explanation:
Carbon has a relative atomic mass of 12 and an atomic number of 6. We must recall that the atomic number of an atom is the number of protons in that atom. The atomic number is also the same as the number of electrons in the neutral atom of that element.
To ensure electrical neutrality of the atom, the number of protons in the atom must be equal to the number of electrons in the atom.
The mass number of an atom is the sum of the number of protons and neutrons present in the atom. Since carbon has a mass number of 12, then there must be six neutrons present in the atom.
According to the electronic configuration and structure of atom statement which is true is that a carbon atom has six protons, six neutrons, and six electrons.The correct option is C.
An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
The carbon atom has atomic number '6' giving it six electrons and six protons and neutrons each.Thus, option 'C' is correct.
Learn more about atom,here:
https://brainly.com/question/1566330
#SPJ6
Explain this
When a small piece of glowing sodium is placed inside a gas jar filled with chlorine gas, the sodium continues to burn brightly but when the gas is replaced by argon gas, the glowing sodium becomes extinguished.
Answer:
Because Argon is a inert gas
Explanation:
Inert gases don't take place in any experiments
Answer:
Below.
Explanation:
The sodium reacts strongly with the chlorine to form NaCl and the heat of reaction continues the brightness, whereas it does not react with the inert gas argon and soon cools down.
In calculating the equilibrium constant for a reaction, the coefficients of the chemical equation are used as exponents for the factors in the equilibrium expression. TRUE FALSE
Answer: The given statement is TRUE.
Explanation:
An equilibrium reaction is one in which rate of forward reaction is equal to the rate of backward reaction.
Equilibrium constant is defined as the ratio of the product of the concentration of products to the product of the concentration of reactants each raised to their stochiometric coefficient.
For example for the given equilibrium reaction;
[tex]2H_2O(g)\leftrightharpoons 2H_2(g)+O_2(g)[/tex]
[tex]K_{eq}=\frac{[H_2]^2[O_2]}{[H_2O]^2}[/tex]
Thus the given statement that in calculating the equilibrium constant for a reaction, the coefficients of the chemical equation are used as exponents for the factors in the equilibrium expression is True.
Which of the following may suggest a catalyst has been used in a reaction, given the energy diagram for the same reaction without a catalyst?
(c) He, Na, Mg (increasing order of melting point).
Answer:
Helium has melting point of - 272.2°C or - 458°F
Sodium (Na) = 650°C. or 208°C
Magnesium (Mg) = 97.79°C. Or 1202°F
Explanation:
The formula for the compound ammonium chloride: NH4Cl+ NH4Cl NH3Cl NH4Cl2
Answer:
NH4Cl
Explanation:
i just did the test
Answer:
NH4Cl
Explanation:
Edg 2020
In the reaction MgCl2 + 2KOH → Mg(OH)2 + 2KCI, how many grams of KOH
react with 1 mole of MgCl2?
A. 95 g
B. 56 g
C. (1/2)(56 g)
O D. (2)(56 g)
Answer:
The correct option is;
D. (2)(56 g)
Explanation:
MgCl₂ + 2KOH → Mg(OH)₂ + 2KCl
From the balanced chemical reaction equation, we have;
One mole of MgCl₂ reacts with two moles of KOH to produce one mole of Mg(OH)₂ and 2 moles of KCl
Therefore, the number of moles of KOH that react with one mole of KCl = 2 moles
The mass, m, of the two moles of KOH = Number of moles of KOH × Molar mass of KOH
The molar mass of KOH = 56.1056 g/mol
∴ The mass, m, of the two moles of KOH = 2 moles × 56.1056 g/mol = 112.2112 grams
The amount in grams of KOH that react with one mole of MgCl₂ = 112.2112 grams ≈ 112 grams = (2)(56 g).
Answer:
the answer is D
Explanation:
good luck
distinguish between deliquescence and efflorescence.
Explanation:
Deliquescent substances are solids that absorb moisture from the atmosphere until they dissolve in the absorbed water and form solutions. Efflorescent: Efflorescent substances are solids that can undergo spontaneous loss of water from hydrated salts.
The temperature of a sample of liquid water changes from 50°C to 30°C. Which statement best explains the change
that must happen at the molecular level?
ОООО
The molecules move more quickly and their average kinetic energy increases.
The molecules move more slowly and their average kinetic energy decreases.
The molecules move more quickly and their average kinetic energy decreases.
The molecules move more slowly and their average kinetic energy increases.
Answer:
The molecules move more slowly and their average kinetic energy decreases
Explanation:
The increased temperature meant that the atoms in liquid had a greater average energy of motion so as the temperature decreases the reaction would be inverse.
The branch of science which deals with the chemicals bond is called chemistry.
The correct option is B.
The energy which is produced by the motion of the particles is called kinetic energy. Temperature increases the motion of the particles. So, the kinetic energy increases when the temperature rises.
According to the question, the temperature of the water decreases therefore the kinetic energy decreases.
Hence, the correct option is B that is the molecules move more slowly and their average kinetic energy decreases.
For more information, refer to the link:-
https://brainly.com/question/25026730
How many moles of ZnCl2 will be produced from 61.0 g of Zn, assuming HCl is excess?
Answer: 0.938 moles of [tex]ZnCl_2[/tex] will be produced.
Explanation:
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
moles of zinc:
[tex]\text{Number of moles}=\frac{61.0g}{65g/mol}=0.938moles[/tex]
[tex]Zn+2HCl\rightarrow ZnCl_2+H_2[/tex]
As HCl is in excess , zinc is the limiting reagent and it limits the formation of product.
According to stoichiometry :
1 mole of Zn produce = 1 mole of [tex]ZnCl_2[/tex]
Thus moles of Zn produce = [tex]\frac{1}{1}\times 0.938=0.938[/tex] moles of [tex]ZnCl_2[/tex]
Thus 0.938 moles of [tex]ZnCl_2[/tex] will be produced.