Accοrding tο the equatiοn 0.4006 mοl οf PF₃ will be required tο prοduce 27.5 grams οf PF₃.
What is mοl?Mοl is a unit οf measurement fοr the amοunt οf a substance. It is used tο measure the amοunt οf a particular element οr cοmpοund in a sample. Mοl is equal tο the number οf atοms, mοlecules, οr οther units in a sample. The size οf a mοl is determined by Avοgadrο's number, which is 6.022 x 10²³.
We first need tο calculate the mοlecular weight οf PF₃. This is dοne by adding up the atοmic masses οf the three atοms in the mοlecule.
P: 30.97 g/mοl
F: 18.99 g/mοl
Therefοre, PF₃ has a mοlecular weight οf:
30.97 + 18.99 + 18.99
= 68.95 g/mοl
Tο calculate the mοles οf PF₃ required tο prοduce 27.5 grams οf PF₃, we divide the mass οf PF₃ (27.5 g) by the mοlecular weight οf PF₃ (68.95 g/mοl):
27.5 g / 68.95 g/mοl
= 0.4006 mοl οf PF₃
Therefοre, 0.4006 mοl οf PF₃ will be required tο prοduce 27.5 grams οf PF₃,
To learn more about mol :
brainly.com/question/15356425
#SPJ1
Can someone help explain how to solve this question? A 250 ml flask contains 0.75 miles of O2, 0.13 miles of N2, and enough moles of H2 that produces a partial pressure of 0.74 atm. The temperature of the gas mixture is 297k. Calculate the total pressure of the flask and calculate the mole fraction of H2.
What can you deduce about the molecular composition of the reactants in a chemical reaction with the following atomic masses?
Reactants: (12 + 1 + 1 + 1 + 1) + (24 +16) = 56 u
Stoichiometric amounts relate to the proportional amounts of reactants and products in a balanced chemical equation.
What transpires during a chemical reaction to the molecules of the reactants?
Only atoms from the reactants can wind up in the products of a chemical reaction. No atoms are annihilated or made into new ones. To create the products, the reactants come into contact with one another, the bonds between their atoms are broken, and the atoms then rearrange and establish new bonds.
The frequency of collisions between the two reactants will grow as the reactant concentration rises. There are times when collisions don't cause a response (atoms misaligned or insufficient energy, etc.). More collisions and reaction possibilities result from higher concentrations.
To learn more about atoms use:
https://brainly.com/question/6258301
#SPJ1
What element is this?
Its electron-dot structure has six dots, and its atoms bond in a one-to-one ratio with magnesium. It has the highest electronegativity in its group.
Answer:
the element is oxygen.
Explanation:
oxygen has six Valence electron which is why it's electron-dot structure also know as Lewis structure has six dots. it also has high electronegativity and form one-to-one bond with magnesium
Which of the following is not an assumption in Bohr's theory. a) Energy is not dissipated when electrons move in an orbital b) Electrostatic force balances force tending to throw electron out of orbital c) Pairing of electrons reduces orbital stability d) Electrons move from one orbital to another by either absorbing or radiating energy
Answer: C
Explanation: The assumption that pairing of electrons reduces orbital stability is not part of Bohr's theory.
Bohr's theory of atomic structure mainly focuses on the behavior of electrons in the atom and makes several key assumptions:
a) Energy is not dissipated when electrons move in an orbital (postulate of quantization)
b) Electrostatic force balances force tending to throw electron out of orbital (Coulomb's law)
d) Electrons move from one orbital to another by either absorbing or radiating energy (postulate of transitions)
Therefore, the correct answer is option (c) Pairing of electrons reduces orbital stability.
PLEASE URGENT ! 100 POINTS
If 16.0 g of AgNO3 react with an excess of BaCl2 according to the following equation, what mass of AgCl gets produced?
2 AgNO3+ BaCl2 → 2 AgCl +Ba(NO3)2
If only 10.0 g of AgCl were recovered, what is the percent yield of this reaction?
Using a 500 mL beaker, a teacher stirred sugar into some water. The sugar seemed to disappear during the stirring process. The beaker was then placed on the teacher’s demonstration desk. A few days later all of the water evaporated, and sugar appeared in the bottom of the beaker. Which is the best evidence that no chemical reaction occurred? A.All the sugar evaporated. B.Sugar combined with water to form a new substance. C.Sugar is still in the beaker. D.All the sugar dissolved faster due to stirring by the teacher.
The best evidence that no chemical reaction occurred in the process described is that the sugar is still in the beaker after the water has evaporated. Therefore, the correct answer is C.
What is a chemical reaction?The chemical, known as the reactant, is changed into a new substance, the product, during a chemical reaction. Here, the atoms that make up the reactants are rearranged to form products. This is an irreversible process.
In the process described in the question, sugar was simply dissolved in water to form a sugar-water solution. This is a physical change, not a chemical change, because the sugar molecules remained intact and did not undergo a chemical reaction with the water molecules. The sugar molecules were simply dispersed throughout the water, making them invisible to the eye.
When the water evaporated, the sugar molecules were left behind and re-crystallized in the bottom of the beaker. This process did not involve a chemical reaction, only a physical change.
To know more about chemical changes, visit:
https://brainly.com/question/23693316
#SPJ1
Decaborane is a compound with the molecular formula B1014
What is the empirical formula of decaborane?
The empirical formula of decaborane is B5H7.
Empirical formula calculation.
To find the empirical formula of decaborane, we need to determine the simplest whole-number ratio of atoms in the compound.
The molecular formula of decaborane is B10H14, which means it contains 10 boron atoms and 14 hydrogen atoms.
To determine the simplest ratio of boron to hydrogen atoms, we can divide each by the greatest common factor (GCF) of the two numbers.
The GCF of 10 and 14 is 2, so we divide each by 2:
B10H14 becomes B5H7
Therefore, the empirical formula of decaborane is B5H7 from B10H14
Learn more about empirical formula below.
https://brainly.com/question/1603500
#SPJ1
which of the following is a single replacement reaction?
A) FeS+2HCl --> H2S+FeCl2
B) Fe+CuSO4 --> FeSO4+Cu
C) AgNO3+NaCl --> AgCl+NaNO3
D) None of the above
Answer: None of the above
Explanation:
Find the concentration of I in 0.10 M AgNO, saturated with AgI. Include activity coefficients in the solubility-product
expression. The Ksp of AgI is 8.3 x 10-17.
The concentration of I in 0.10 M AgNO, saturated with AgI in the solubility product is 8.3 x 10^-16 M.
Solubility product calculation.The solubility product expression for AgI is:
Ksp = [Ag+][I-]
At equilibrium, the concentration of Ag+ ions is equal to the solubility of AgI, which is equal to the molar solubility of AgI in 0.10 M AgNO3. Let's assume that the molar solubility of AgI is x. Then, the equilibrium concentrations of Ag+ and I- ions are:
[Ag+] = 0.10 M + x
[I-] = x
The solubility product expression can be written as:
Ksp =[tex]\sqrt{x}[/tex] ([Ag+] * [I-])
Substituting the equilibrium concentrations into the solubility product expression, we get:
Ksp = √(0.10 M + x) * (x)
Using the quadratic equation, we can solve for x:
Ksp =√ 8.3 x 10^-17
0.10 M is much greater than x, so we can assume that (0.10 M + x) ≈ 0.10 M
Ksp = (0.10 M) * (x)
x = Ksp / (0.10 M)
x = 8.3 x 10^-16
So, the molar solubility of AgI is 8.3 x 10^-16 M. Since the concentration of I- ions is equal to the solubility of AgI, the concentration of I- ions is also 8.3 x 10^-16 M.
Learn more about solubility product below.
https://brainly.com/question/857770
#SPJ1
Determine if each set of the quantum numbers is allowed or not allowed.
Rules Governing the Allowed Combinations of Quantum Numbers
The principal quantum range (n) can't be zero. The allowed values of n are consequently 1, 2, 3, 4, and so on. The angular quantum quantity (l) can be any integer between zero and n - 1. If n = 3, for example, l can be either 0, 1, or 2.
Which of the following units of quantum numbers are not allowed and why?The set of quantum numbers n=1,l=1,ml=0,ms=+21 is no longer viable for an electron.
Which of the following units quantum numbers is allowed?So right set of quantum numbers is n=2,l=1,m=0,s=+21.
Which of the following is an allowed set of quantum numbers for an electron in the 4p orbital?Solution : The designation `4p` indicates that the orbital has a important quantum number `n = 4` and an angular-momentum quantum wide variety `l = 1`. The magnetic quantum quantity can have any of the values `-1, 0`, or `+1`.
Learn more about quantum here;
https://brainly.com/question/2292596
#SPJ1
please help!!! A, B, C, or D
Answer:
A
Refer to pic for explanation
You have a glass of water and a piece of metal. The water in the glass weighs 250 g and is at 25 C. The metal is at 155 C. You measure the final temperature of the water plus metal to be 38.5 C. The specific heat of the metal is .345 J/gC and for water the specific heat is 4.184 J/gC. How many grams did the piece of metal weigh?
You use q = mcT again, but this time you assume qaluminum = qwater and solve for T, which is the ultimate temperature. You must research the specific heat values (c) of aluminum and water.
How do you find the specific heat capacity of a metal in water?To calculate the heat capacity of a metal, use Q = smT. (In this calculation, make careful to include the heat given out by the metal, the mass of the metal, and the temperature change of the metal.)
The metal will cool and the water will heat up over time. The two things will eventually have the same temperature. They are then considered to be thermally balanced with one another.
Learn more about metal in water,
https://brainly.com/question/30327877
#SPJ1
Consider the balanced equation:
2 CH4 (g) + 3 O2 (g) + 2 NH3 ---> 2 HCN (g) + 6 H2O (g)
If 203.6 g of NH3 is reacted with excess CH4 and O2, what mass in grams of HCN is produced?
The mass (in grams) of HCN produced when 203.6 g of NH₃ reacts with excess CH₄ and O₂ is 323.4 g
How do I determine the mass of HCN produced?The mass of HCN produced when 203.6 g of NH₃ reacts with excess CH₄ and O₂ can be obtained as follow:
2CH₄(g) + 3O₂(g) + 2NH₃ -> 2HCN(g) + 6H₂O(g)
Molar mass of NH₃ = 17 g/molMass of NH₃ from the balanced equation = 2 × 17 = 34 g Molar mass of HCN = 27 g/molMass of HCN from the balanced equation = 2 × 27 = 54 gFrom the balanced equation above,
34 g of NH₃ reacted to produce 54 g of HCN
Therefore,
203.6 g of NH₃ will react to produce = (203.6 × 54) / 34 = 323.4 g of HCN
Thus, the mass of HCN produced is 323.4 g
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
Consider the Haber-Bosch process for the synthesis of ammonia from its elements.
Calculate the theoretical yield in moles NH, from the complete reaction of 15.6
grams H₂ in the presence of excess N, gas according to the following balanced
chemical equation:
ADD FACTOR
3 H₂(g) → 2 NH,(g)
N₂(g) + 3
Answer:
The theoretical yield in moles of NH3 is 5.2 moles. This is calculated by dividing the mass of H2 (15.6 g) by the molar mass of H2 (2.016 g/mol) to get the number of moles of H2 (7.76 moles). Then, using the mole ratio from the balanced equation, we can calculate the number of moles of NH3 produced (5.2 moles).
Explanation:
Answer the following:
The molecular formula of acetylene is C₂H₂ and ethylene is C₂H₄.
What is the difference between molecular and empirical formulas?The simplest whole-number ratio of the atoms in a compound is shown by empirical formulae, the number of each type of atom in a molecule is shown by molecular formulas, and the bonds between the atoms in a molecule are shown by structural formulas. The empirical formula of naphthalene is C₁₀H₈ and benzene is C₆H₆.
The chemical formula of the reactants and products are:
Na₂SO₄ + Ca(NO3)₂ → NaNO₃ + CaSO₄Mg + N₂ → MgN₂The balanced reactions are:
Hg(NO₃)₂ → HgO + 2NO₂ + O₂Ca₃(PO₄)₂(aq) + 4H₃PO₄(aq) → 3Ca(H₂PO₄)₂(aq)3NaOH(aq) + FeCl₃(aq) → Fe(OH)₃(aq) + 3NaCl(aq)Learn more about molecular formulas, here:
https://brainly.com/question/14425592
#SPJ1
Which of the following correctly describes delocalized valence electrons in a metal?
Group of answer choices
Valence electrons move from outer orbitals to inner orbitals of each atom.
Valence electrons move from inner orbitals to outer orbitals of each atom.
Valence electrons move between atoms in shared orbitals.
Valence elctrons move out of the orbitals and go into the air.
Valence electrons move between atoms in shared orbitals- correctly describes delocalized valence electrons in a metal
Why are valence electrons important and what do they do?
The outermost or valence shell electrons, known as valence electrons, are crucial because they shed light on an element's chemical characteristics and are the ones that are acquired, lost, or shared during a chemical reaction. In general, when an atom's outermost electron shell is complete, it is at its most stable and least reactive.
The number of valence electrons for neutral elements is the same as the number of the atom's main group. A periodic chart element's column can be used to determine its main group number. For instance, carbon, which belongs to group 4, has four external electrons.
To learn more about valence electrons use:
https://brainly.com/question/371590
#SPJ1
When 43 g of ethyl lactate, which has an empirical formula of C5H10O3, is burned in excess oxygen gas, how many grams of CO2 are formed? mC = 12.011 g/mol, mH = 1.00794 g/mol, and mO = 15.9994 g/mol.
Answer in units of g.
When 43 g of ethyl lactate is burned in excess oxygen gas, 80.098 g of CO2 are formed.
What is Molecular Formula?
A molecular formula represents the actual number and type of atoms that make up a molecule of a compound. It shows the chemical symbols for the different elements in the compound and the subscript numbers that indicate the number of atoms of each element. For example, the molecular formula for water is H2O, which shows that each molecule of water contains two hydrogen atoms (H) and one oxygen atom (O).
First, we need to determine the molecular formula of ethyl lactate. The empirical formula of C5H10O3 has a molecular weight of approximately 118 g/mol (5 * 12.011 g/mol for carbon + 10 * 1.00794 g/mol for hydrogen + 3 * 15.9994 g/mol for oxygen).
To find the molecular formula, we need to know the actual molecular weight of ethyl lactate. We can use the given amount of ethyl lactate (43 g) to calculate the number of moles:
n = m/M = 43 g / 118 g/mol = 0.3644 mol
Now, we need to find the molecular formula. We can do this by dividing the molecular weight (118 g/mol) by the empirical formula weight (which we already calculated as 118 g/mol):
118 g/mol / 118 g/mol = 1
This tells us that the empirical formula is also the molecular formula, so ethyl lactate is C5H10O3.
Now we can use the balanced chemical equation for the combustion of ethyl lactate:
C5H10O3 + 8 O2 → 5 CO2 + 5 H2O
From the equation, we can see that 1 mol of ethyl lactate produces 5 mol of CO2. We already calculated that we have 0.3644 mol of ethyl lactate, so we can use this to find the amount of CO2 produced:
n(CO2) = 5 mol CO2/mol ethyl lactate * 0.3644 mol ethyl lactate = 1.822 mol CO2
Finally, we can convert this to grams of CO2:
m(CO2) = n(CO2) * M(CO2) = 1.822 mol * 44.0095 g/mol = 80.098 g
Therefore, when 43 g of ethyl lactate is burned in excess oxygen gas, 80.098 g of CO2 are formed.
Learn more about Molecular Formula from given link
https://brainly.com/question/15960587
#SPJ1
2.62 Predict the chemical formulas of the compounds formed by the following pairs of ions: (a) Cr3+ and Br, (b) Fe3+ and O2, (c) Hg22+ and CO2, (d) Ca2+ and CIO3, (e) NH4+ and PO³
The compounds formed are;
1) [tex]CrBr_{3}[/tex]
2) [tex]Fe_{2} O_{3}[/tex]
3) [tex]((Hg)_2}) _{2} (CO_{3}) _{2}[/tex]
4) [tex]Ca(ClO_{3} )_{2}[/tex]
5)[tex](NH_{4}) _{3} PO_{4}[/tex]
How are ionic compounds formed?Ionic compounds are formed through a type of chemical bonding called ionic bonding. Ionic bonding occurs when one or more electrons are transferred from one atom to another, resulting in the formation of ions, which are atoms or molecules that have a net electric charge due to a loss or gain of electrons.
The formation of ionic compounds typically occurs between atoms with large differences in electronegativity, or the ability of an atom to attract electrons.
Learn more about compounds:https://brainly.com/question/13516179
#SPJ1
rate law problem need help on
The rate of a reaction is proportional to the some power of the molar concentration of each of the reactants. The order gives us an idea about the kinetics of the reaction.
What is order of a reaction?The order of a reaction is defined as the sum of the powers of the concentration terms of the reactants in the experimentally determined rate equation for the reaction. It is an experimental quantity.
a. The order of the alkene is 1
b. The order of the bromine s 2
c. The overall kinetic order is 3
Since the reaction is third order, the overall rate constant is mol²L⁻²s⁻¹ or M⁻²s⁻¹.
To know more about order of the reaction, visit;
https://brainly.com/question/15909753
#SPJ1
Magnesium carbonatea n d hydrochloric acid react to produce salt, water and carbon
dioxide.
MgcO, + 2 HCt m MgCh + H,0 +CO. .
What is the volume of CO, produced when 21 g of magnesium carbonate reacts
completely with excess hydrochloric acid?
A 4 dma
B 8dm°
C 6dm D 2dm
Answer:
Explanation:
The balanced chemical equation for the reaction between magnesium carbonate and hydrochloric acid is:
MgCO3 + 2HCl → MgCl2 + H2O + CO2
From the equation, we can see that 1 mole of magnesium carbonate reacts with 2 moles of hydrochloric acid to produce 1 mole of carbon dioxide. The molar mass of magnesium carbonate is 84.3 g/mol, which means that 21 g of magnesium carbonate is equal to 0.25 moles (21/84.3). Therefore, 0.25 moles of magnesium carbonate will react with 0.5 moles of hydrochloric acid to produce 0.25 moles of carbon dioxide.
The volume of carbon dioxide can be calculated using the ideal gas law, which is PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature. Assuming standard temperature and pressure (STP) of 273 K and 1 atm, we can use the molar volume of a gas at STP, which is 22.4 L/mol, to calculate the volume of carbon dioxide produced.
V = n × 22.4 L/mol
V = 0.25 mol × 22.4 L/mol
V = 5.6 L
Therefore, the volume of carbon dioxide produced when 21 g of magnesium carbonate reacts completely with excess hydrochloric acid is 5.6 L. The answer is option A, 4 dm³, which is approximately equal to 5.6 L.
2KClO3-2KCl+3O2 how many moles of O2 can be produced by decomposing 12 moles of KClO3?
18 moles of oxygen can be produced by decomposing 12 moles of KClO₃.
How many moles are produced from 12 moles of KClO₃?The balanced chemical equation for the decomposition of KClO₃ is:
2KClO₃ → 2KCl + 3O₂
According to the equation, for every 2 moles of KClO₃ decomposed, 3 moles of O₂ are produced. So, to determine how many moles of O₂ are produced by decomposing 12 moles of KClO₃, we can use the following proportion:
2 moles KClO₃ / 3 moles O₂ = 12 moles KClO₃ / x moles O₂
where x is the number of moles of O₂ produced.
Solving for x, we get:
x = (3 moles O₂)(12 moles KClO₃) / (2 moles KClO₃)
x = 18 moles O₂
Therefore, 12 moles of KClO₃ can produce 18 moles of O₂.
Learn more about moles, here:
https://brainly.com/question/15209553
#SPJ9
To be considered a cognitive psychologist, you typically need what degree?
All cognitive psychologists work in academia performing research. T OR F
If you want to pursue a career in cognitive psychology, it is important to participate in a DIS during your undergraduate career. T or F
A Ph.D. or Psy.D. in psychology with a cognitive psychology concentration is normally required to be categorized as a cognitive psychologist. Thus, the choice is between a Ph.D. and a Psy.D.
All cognitive psychologists work in academia performing research. T OR FFalse. While most cognitive psychologists do their study in academic institutions, some may work in governmental, nonprofit, or commercial organizations.
If you want to pursue a career in cognitive psychology, it is important to participate in a DIS during your undergraduate career. T or FFalse. It is not compulsory to pursue a career in cognitive psychology, even though taking part in a Directed Independent Study (DIS) during your undergraduate studies may be advantageous to get research experience in the field. Other options for developing one's research abilities and experience include working in a lab or doing an internship.
to know more about psychology here;
brainly.com/question/29436774
#SPJ1
2 Al + 6 HCI 2 AICI, +3 H2 What mass of aluminum is required to produce 30 grams of H2
Answer:
269.8
Explanation:
The balanced chemical equation for the reaction between aluminum and hydrochloric acid is:
2 Al + 6 HCl -> 2 AlCl3 + 3 H2
From the equation, we can see that 2 moles of aluminum react with 3 moles of H2 to produce 2 moles of AlCl3. Therefore, the molar ratio of aluminum to hydrogen gas is 2:3.
To find the mass of aluminum required to produce 30 grams of H2, we need to use the molar mass of hydrogen gas and the molar ratio between aluminum and hydrogen gas. The molar mass of hydrogen is approximately 1 g/mol.
First, we need to calculate the number of moles of hydrogen gas produced:
30 g H2 x (1 mol H2/2 g H2) = 15 mol H2
Since the molar ratio of aluminum to hydrogen gas is 2:3, we can calculate the number of moles of aluminum required:
15 mol H2 x (2 mol Al/3 mol H2) = 10 mol Al
Finally, we can calculate the mass of aluminum required:
10 mol Al x (26.98 g Al/mol) = 269.8 g Al
Therefore, approximately 269.8 grams of aluminum are required to produce 30 grams of H2.
Type your answer here:
Table 1. Measurements Taken from a Simulation of a [insert mass value] kg Ball Released from Various Heights on a Ramp
Mass of ball (kg) Drop height on-ramp (m) Potential energy (J) Time to travel 1.0 m (s) Speed (m/s) Kinetic energy (J)
0.5
1.0
1.5
2.0
2.5
3.0
Conclusions
1. What conclusions can you draw about how the amount of potential energy stored in a system changes as a ball is placed at varying heights on a ramp? Write an evidence-based claim.
Type your answer here:
2. What conclusions can you draw about how the final kinetic energy of a ball in a system changes as a ball is placed at varying heights on a ramp? Write an evidence-based claim.
Type your answer here:
3. Develop a model (diagram) that shows how different amounts of gravitational potential energy (GPE) are stored in the earth-ball system when the ball is raised to different heights on the ramp.
Type your answer here:
4. How did you use what you learned from the first part of the experiment to design a marble run?
Type your answer here:
I used the results from the first part of the experiment to design a marble run by understanding the principles of potential and kinetic energy.
What is kinetic energy?Kinetic energy is the energy of motion. It is the energy an object has due to its motion. When an object is moving, it has kinetic energy. This energy is dependent on the mass of the object and its velocity. Kinetic energy can be calculated by multiplying the mass of the object by the square of its velocity and then dividing the result by two. Kinetic energy is one of the two main types of energy, along with potential energy. It has the ability to cause change within a system, such as breaking chemical bonds. When an object is at rest, it does not have kinetic energy. However, as soon as it begins to move, it acquires kinetic energy. Kinetic energy can be changed or transferred from one object to another, or from one form to another.
To learn more about kinetic energy
https://brainly.com/question/20005035
#SPJ1
Which substance are needed for cellular respiration 
Answer: Oxygen and glucose are both reactants in the process of cellular respiration. The main product of cellular respiration
a sample of crystaline compound when heated in an open test tube produced sevrral droplets of water on the cool upper region of the tube the residue
The presence of water droplets on the cool upper portion of the test tube after heating the compound suggests that water molecules are trapped within its crystal structure. If the substance were a real hydrate, heating it would have caused all of the water molecules to evaporate, leaving behind an anhydrous substance.
What do you mean by crystalline compound?
A substance is said to be crystalline if it contains a repeating pattern of well-defined, organised, three-dimensionally arranged atoms or molecules throughout its structure. The compound's distinctive crystalline shape comes from this ordered arrangement, which also gives it additional crystalline solid-specific physical and chemical features.Crystalline compounds can take on a variety of shapes, from straightforward atomic or molecule crystals to intricate mineral formations, and they can be made up of a variety of different elements and compounds. Crystalline substances include, among many others, diamond (carbon), sugar (sucrose), table salt (NaCl), and sugar.The presence of water droplets on the cool upper portion of the test tube after heating the compound suggests that water molecules are trapped within its crystal structure. If the substance were a real hydrate, heating it would have caused all of the water molecules to evaporate, leaving behind an anhydrous substance.
However, the residue created a yellow-brown solution after being further dissolved in water, which is a certain sign of contaminants. When dissolved in water, true hydrates always produce a clear, colourless solution. Thus, the fact that the residue resulted in a coloured solution implies that the compound had impurities.
Together, the water stains and contaminants in the leftovers indicate that the original substance was not a genuine hydrate, but rather a mixture of the anhydrous substance and water, which may have been non-stoichiometrically trapped inside the crystal lattice or adsorbed onto the surface of the crystals.
Learn more about crystalline compound click here:
https://brainly.com/question/28972400
#SPJ1
Calculate the pH at the equivalence point for the following titration: 0.20 M HCl versus 0.10 M NaOH.
The pH at the equivalence point for the titration of 0.20 M HCl versus 0.10 M NaOH is 7.0.
The reaction between HCl and NaOH is a strong acid-strong base titration. At the equivalence point, all of the HCl has reacted with an equal amount of NaOH to form water and NaCl.
StepsThe balanced equation for the reaction is:
HCl + NaOH → NaCl + H2O
Since the reaction between HCl and NaOH is a 1:1 stoichiometric ratio, we can say that at the equivalence point, the moles of HCl consumed are equal to the moles of NaOH added.
Moles of HCl = concentration of HCl × volume of HCl used
Moles of NaOH = concentration of NaOH × volume of NaOH added
At the equivalence point, Moles of HCl = Moles of NaOH. Therefore,
concentration of HCl × volume of HCl used = concentration of NaOH × volume of NaOH added
Since we have equal volumes of HCl and NaOH at the equivalence point, we can simplify the equation to:
concentration of HCl = concentration of NaOH
Therefore, the concentration of HCl and NaOH at the equivalence point is both 0.15 M (the average of the initial concentrations of 0.20 M HCl and 0.10 M NaOH).
To find the pH at the equivalence point, we can use the equation for the dissociation of water:
H2O ⇌ H+ + OH-
At 25°C, the concentration of water is 55.5 M. At the equivalence point, the concentration of H+ and OH- are both equal, so we can write:
Kw = [H+][OH-]
where Kw is the ion product constant for water, which has a value of 1.0 × 10^-14 at 25°C.
At the equivalence point, the concentration of H+ and OH- are both equal to the concentration of NaOH and HCl, which is 0.15 M.
Therefore:
Kw = [H+][OH-]
1.0 × 10^-14 = [0.15][0.15]
[H+] = [OH-] = sqrt(1.0 × 10^-14) = 1.0 × 10^-7 M
The pH at the equivalence point is equal to the negative logarithm of the H+ concentration:
pH = -log[H+]
pH = -log(1.0 × 10^-7)
pH = 7.0
Therefore, the pH at the equivalence point for the titration of 0.20 M HCl versus 0.10 M NaOH is 7.0.
learn more about pH here
https://brainly.com/question/22390063
#SPJ1
What is the water of crystallization for a hydrate composed of 45.1% water? The anhydrous salt has a mass of 178 amu.
The 8 anhydrοus salt has a mass οf 178 amu..
What is mοle?A mοle is the atοm's elementary particle, an iοn. The mοle οf the substance is always related tο the Avοgadrο number. The mοle is always assοciated with the weight οr mass οf the element οr substance. The standard unit οf a mοle is mοl. The mοle is a significant factοr οf the reactant and prοducts tο fοrm an equatiοn. A mοle calculates the atοm, iοn, and substance weighs.
The amοunt οf matter in a bοdy is referred tο as its mass. The kilοgrams is the kilοgrams, which is the SI unit οf mass (kg). Mass is defined as: Mass = Density /Vοlume.
mass οf water =45.1% = 45.1 g
means that 45.1 g οf water in 100 g salt
hence mass οf anhydrοus salt(As)= 100 g - 45.1 g = 54.9 g
mοlar mass οf anhydrοus salt (As) = 178 amu=178 g /mοl
mοlar mass οf water (H2O)=18.015 g /mοl
1st step:- Find mοl οf water
mοl οf water = mass οf water / mοlar mass οf water
= 45.1 g / 18.015 g /mοl
= 2.5035 mοl
2nd step:- find mοl οf Anhydrοus salt
mοl οf Anhydrοus salt (As) = mass οf anhydrοus salt / mοlar mass οf anhydrοus salt
= 54.9 g / 178 g /mοl
= 0.3084 mοl
3rd step:-calculate water οf crysatlisatiοn
= mοl οf water / mοl οf Anhydrοus salt
= 2.5035 mοl / 0.3084
= 8.118
= 8 (apprοx)
hence tοtal 8 mοl οf water present in Anhydrοus salt(As) = As*8H20
Therefοre, 8 anhydrοus salt has a mass οf 178 amu.
Learn more about mole from the given link.
https://brainly.com/question/29367909
#SPJ1
Zn + 2HCI H2 + ZnCI2 caculate the grams of zinc chloride produced if .236 grams of zinc react completely
The grams of zinc chloride produced if .236 grams of zinc react completely is 0.492 grams
Grams calculation
The balanced chemical equation for the reaction is:
Zn + 2 HCl → H2 + ZnCl2
The molar mass of Zn is 65.38 g/mol and the molar mass of ZnCl2 is 136.29 g/mol.
To calculate the grams of zinc chloride produced, we first need to find the number of moles of zinc used in the reaction:
moles of Zn = mass of Zn / molar mass of Zn
moles of Zn = 0.236 g / 65.38 g/mol
moles of Zn = 0.00361 mol
From the balanced chemical equation, we can see that the stoichiometric ratio of Zn to ZnCl2 is 1:1. This means that 0.00361 mol of Zn will produce 0.00361 mol of ZnCl2.
To calculate the mass of ZnCl2 produced, we can use the following equation:
mass of ZnCl2 = moles of ZnCl2 x molar mass of ZnCl2
mass of ZnCl2 = 0.00361 mol x 136.29 g/mol
mass of ZnCl2 = 0.492 g
Therefore, if 0.236 grams of zinc react completely, 0.492 grams of zinc chloride will be produced.
Learn more about grams below.
https://brainly.com/question/29649764
#SPJ1
11. A chemist mixed two samples together: a brown solid that melts at about 1,300°C and a colorless liquid that melts at about 20°C. She analyzed the results and found two ending substances. One of the ending substances melts at about 250°C. This ending substance is made up of the repeating group of atoms shown above. Which of the diagrams to the left shows the repeating groups of atoms that make up the samples the chemist mixed together?
Diagram c to the left shows the repeating groups of atoms that make up the samples the chemist mixed together.
What is atoms?Atoms are the smallest unit of matter that make up all physical objects. Atoms are composed of three main components: protons, neutrons, and electrons. Protons and neutrons are found in the nucleus of the atom and have a positive charge, while electrons orbit the nucleus and have a negative charge. Atoms can join together to form molecules, which are the building blocks of all matter. Atoms of different elements can join together in different ways to form compounds and these compounds are the basis of all substances. Atoms are also the basis of all chemical reactions and can exist in different physical states, such as solid, liquid, or gas. Atoms can also be combined to form isotopes, which are atoms of the same element with different numbers of neutrons.
To learn more about atoms
https://brainly.com/question/6258301
#SPJ1