skater A travels with velocity of 3.2 m/s and has a momentum of 200 kg m/s

Latency problems can be prevented by not downloading multiple items at a time, not running multiple applications simultaneously, scanning for viruses, and not deleting the cache.

One of the principal causes of network latency is distance, specifically the distance between client devices making requests and the servers responding to those requests. Customers demand to communicate with technology in real time without any delays, hence low latency is essential. Users may stop using a platform altogether and switch to another application permanently if there are problems with severe latency and time delays.

In milliseconds, latency reveals the strength of your connection within your network. For gaming, anything with a latency of 100ms or less is fine. However, the ideal range is 20–40 ms.

To learn more about latency visit:

brainly.com/question/14894222

#SPJ4

The instantaneous electric power provided to the heater will be 1.32 kW.

Electric power can be defined as the rate by which an electric circuit transfers the electrical energy. An electric heater is drawing a constant current which is equal to 6 ampere with an applied voltage of 220 volts for a duration of 24 hours.

To calculate the instantaneous power supplied to the electric heater,

Power = Voltage × Current

P = V × I

P = 220 × 6

P = 1320 W

To convert it into kW, we divide the value by 10³

= 1320/10³ = 1.32 kW

To know more about electric power here

https://brainly.com/question/1125269

#SPJ4

The truck bed and the crate's static coefficient of friction, assuming the crate doesn't slide, is 0.400.

Between the truck bed and the crate, there is 0.64 coefficient of static friction. When the bed is in the position depicted, the truck must move quickly to the right in order to make the crate slide.

The resistive friction force (Fr) divided by the normal or perpendicular pushing force (N) yields the coefficient of friction, which is a numerical value. The formula fr = Fr/N is used to represent it.

To know more about static friction visit:-

https://brainly.com/question/13000653

#SPJ4

Answer: Hello! An objects speed is constant and has the units meters per second (m/s); thus, it does not change overtime. Acceleration is a rate of change where the speed does either increase or decrease overtime from its inital value; its units are meters per second second (m/s/s). I hope that helps!

The situation will be describe with:

C. The fish increased the buoyant force by reducing its density.

A swim bladder is an internal organ that some fish use to control their buoyancy. The fish can adjust the amount of gas in the swim bladder to make itself more or less dense than the water around it. In order to rise toward the surface of the water, the fish would need to decrease its density relative to the water, which it can do by increasing the amount of air in its swim bladder. This increase in air in the swim bladder reduces the fish's density, which in turn increases its buoyancy and allows it to rise to the surface.

There are different ways that a fish can control its buoyancy, and different species of fish may have different adaptations for doing so. Some fish may have other organs or structures that can be used to control buoyancy, such as lipids in their body tissue, or fins that can be used to control their position in the water.

Additionally, some fish may have the ability to change their shape or size in order to control their buoyancy, such as by swallowing air or by compressing their swim bladder. However, in general, the most common way for fish to control buoyancy is by adjusting the amount of gas in their swim bladder.

Learn more about swim bladder here:

https://brainly.com/question/14431269

#SPJ4

Price Waterhouse and Coopers (sometimes it can also be 'Price Waterhouse and Coopers & Lybrand'!)

Here is some extra information I know about the PWC Company!:

Under the PwC brand, Price Waterhouse Coopers is a multinational professional services network of firms that operate as partnerships. PwC, together with Deloitte, EY, and KPMG, is the world's second-largest professional services network. It is one of the Big Four accounting companies.

If this helps, please mark me brainliest!

Have a wonderful day!

Answer:

9000N

Explanation:

gravitational field strength of earth is approximately 10N/kg .

900kg×10N/kg

=9000N

With merely a 2. 3 m/s beginning velocity, a horizontally dart launch accelerates upward at a rate of -9.8 m/s².

The rate at which speed and distance for velocity vary over time is known as acceleration. Anything is said to have been accelerated when it goes quicker or slower in a single direction.

When an item accelerates positively, it moves more quickly than it did before. In the first instance, the moving automobile showed positive acceleration. The acceleration is accelerating in a way that is comparable with the direction in which the vehicle is speeding up and velocomotion is accelerated in a route that is compatible with the direction in which the vehicle is

Let's say a body of mass (m) is shot from a height (h) above surface of the planet. As it descends at a faster rate, it eventually reaches the ground.

Under the influence of gravity, which is acting at a distance r from the earth's core, the body begins to accelerate in that direction.

Then, ma = GMm/r²

a = GM/r²

Therefore, the value of the acceleration due to gravity (g) = GM/r2.

Any object freely falling to the surface of the earth has acceleration due to gravity is 9.8m/s².

The earth's gravitational attraction is felt by the object if it shifts away from the planet's surface. Dart's vertical acceleration is therefore equivalent to -g.

As a result, the dart's vertical acceleration is equivalent to -9.8m/s2.

To know more about acceleration visit:

https://brainly.com/question/2303856

#SPJ4

Work is accomplished by stretching or compressing a spring. Elastic potential energy is stored in the spring. It is recommended to expand the spring up to 12.8 cm.

Elastic potential energy is stored in the spring as a result of the work required to stretch or compress it. A spring's elastic potential energy is equal to one-half the sum of its spring constant times its deformation squared.

We'll talk about elastic potential energy as the second type of potential energy. The energy that is trapped in elastic materials as a result of their stretching or compression is known as elastic potential energy.

To know more about spring stretched here:

brainly.com/question/14203117

#SPJ1

Alberta will meet the paper ball 8m away from Fatima's position after 13.3 seconds.

What is the seconds?

Seconds is a unit of time and is the base unit of time in the International System of Units (SI). It is described as the length of 9,192,631,770 radiation periods that correspond to the change between the two hyperfine levels of the cesium-133 atom's ground state. One second is equal to 1/60 of a minute, 1/3,600 of an hour, 1/86,400 of a day, and 1/31,536,000 of a year.

Seconds are a unit of time that is equal to one sixty-fourth of a minute. It is the base unit of measurement for time in the International System of Units (SI). One second is equal to 1000 milliseconds or 0.000277778 minutes. Seconds can be used to measure very short periods of time, such as the time it takes for light to travel from one end of a football field to the other.

To learn more about seconds visit:

brainly.com/question/26524032

#SPJ1

Answer:

dang this hard

Explanation:

i will try to help

The gravitational attraction between two objects grows in strength with each object's mass. The gravitational force between two objects doubles when one of the objects' masses doubles.

The acceleration that gravity imparts to objects falling freely is used to quantify gravity. At the surface of the Earth, gravity accelerates at a rate of around 9.8 meters (32 feet) per second. As a result, an object in free fall accelerates by 9.8 meters per second for every second that it is falling.

The gravitational field strength of the Earth is 9.8 N/kg. Accordingly, an item will feel 9.8 N of force for every kg of mass. That weight of a thing is lower if the gravitational field is weaker. The Moon, for instance, has a gravitational field that is 1.6 N/kg strong.

To know more about gravity visit:

https://brainly.com/question/14874038

#SPJ1

By looking at the brightness of two stars, astronomers can compare the relative distance of the two stars from Earth.

Who are astronomers?

Astronomers are scientists who study the universe and its phenomena. They observe, analyze, and interpret astronomical data to understand the physical and chemical properties of celestial bodies and their evolution over time. Astronomers use a variety of tools and techniques, including powerful telescopes, spectroscopy, and computer-based analysis, to explore the universe.

Step 1: Write the equation in the form of y= mx + b.

I = k/d^2

y = k/d^2

Step 2: Substitute the given values for k and m.

y = 16/d^2

Step 3: Graph the equation by plotting points for various values of d.

We can plot points for various values of d. For example:

d = 1, y = 16

d = 2, y = 4

d = 3, y = 16/9

d = 4, y = 1

d = 5, y = 16/25

We can plot these points on a graph and connect them with a smooth curve.

To know more about astronomers,

https://brainly.com/question/14276202

#SPJ4

Answer: 0.043mm/s

Explanation:

The drift speed of electron in this wire will ba calculated as:

= I/nqA

= I/nqπr²

= 3.7/[(1.1 × 1^29) × (1.6 × 10^19) × (3.14 × 0.00125²)

= 4.3 × 10^-5

= 0.043mm/s

The drift speed of the electron in this wire is 0.043mm/s.

The results in terms of wavelength, velocity, and frequency i.e (L,f,v) are as follow,.

(a) λ = v/f

(b) The value of the first minimum will be [tex]x =\sqrt{\frac{v^2}{4 f^2}+\frac{v L}{f}}[/tex]

(c) The position for the first maxima of 2nd speaker = [tex]$$x=\sqrt{\frac{v}{f}\left(\frac{v}{f}+2 L\right)}$$[/tex]

A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles. This length is often defined in wireless systems in meters (m), centimeters (cm), or millimeters (mm) (mm).

(a) Relation among velocity, wavelength and frequency can be defined the expression: v = fλ

From above, we can write, (λ) (wavelength) can  be equal to velocity (v) / Frequency (f)

So, λ = v/f

(b) path difference can be determined by using the expression: [tex]\Delta x=x_2-x_1 \\[/tex]

[tex]\Delta x=\sqrt{L^2+x^2}-L\end{aligned}$$[/tex]

So, for the first minimum, we can conclude the following:

[tex]$\left\{n x=\frac{d}{2}=\frac{v}{2 f}\right.$$$\frac{v}{2 f}=\sqrt{L^2+x^2}-L$$[/tex]

[tex]\left(\frac{v}{2 f}+L\right)^2 & =L^2+x^2 \\\\x^2 =\frac{v^2}{4 f^2}+L^2+\frac{v L}{f}-L^2 \\\\x =\sqrt{\frac{v^2}{4 f^2}+\frac{v L}{f}}[/tex]

(c) for first order maxima

[tex]$$\begin{aligned}& \Delta x=\lambda \\& \frac{v}{f}=\sqrt{L^2+x^2}-L\end{aligned}$$[/tex]

[tex]$$\begin{aligned}x^2 & =\frac{v^2}{f^2}+L^2+\frac{2 V L}{f}-L^2 \\x & =\sqrt{\frac{v^2}{f^2}+\frac{2 v L}{f}}\end{aligned}$$[/tex]

So, the position for the first maxima of 2nd speaker will be:

[tex]$$x=\sqrt{\frac{v}{f}\left(\frac{v}{f}+2 L\right)}$$[/tex]

For more questions on destructive interference

https://brainly.com/question/23594941

#SPJ4

The missing diagram is attached below:

The acceleration of the airboat which has a mass of 350 kg is 2.2 m/s²

The time the airboat takes to reach the speed of 12 m/s is 5.45 seconds

The mass of the airboat = 350 kg

The net horizontal force of the airboat = 770 N

The acceleration of the airboat can be found using the formula,

         F = ma

where F is the force

           m is the mass

           a is the acceleration

Let us rearrange the above equation, we get

          a = F/m

Let us substitute the known values in the above equation, we get

           a = 770 / 350

              = 2.2 m/s²

The time taken to reach the speed of 12 m/s is

               a = v/t

where a is the acceleration

           v is the velocity

           t is the time taken

Let us rearrange the equation, we get

          t = v/a

Let us substitute the known values in the above equation, we get

          t = 12 / 2.2

           = 5.45 seconds

Learn more about the force in

https://brainly.com/question/15321240

#SPJ4

Answer:

2000

Explanation:

180/0.09

=2000

pressure=force/area

The magnetic field outside the solenoid [tex]B_{\text {out }}[/tex] is zero.

The magnetic field lines are present outside the solenoid, but there are significantly less of them there than there are inside the solenoid. This is known as the flux. As a result, the magnetic field outside is thought to be almost nil. It is more accurate to assume that the magnetic field outside the solenoid is zero if the solenoid is quite long. It is false close to the solenoid's edge. We consider the magnetic field outside the solenoid to be zero for practical purposes. This amount of flux divided by the area outside the solenoids gives the flux density, which is equal to the strength of the field outside the solenoid is zero.

To learn more about Solenoid :

https://brainly.com/question/9535280

#SPJ4

A globe is a miniature replica of the planet. We can see the size, shape, and placement of continents and oceans, which is helpful.

A globe's stand is attached to the meridian. Latitude (coordinate) markings can be found on several meridian lines. These markings range from 0° at the equator to 90° at the north and south poles.

The Unisphere is tipped at an angle of 23.5 degrees, which corresponds to the tilt of the Earth.

The globe makes it possible to see the entire planet at a glance. Along with their latitudes and longitudes, it displays many nations, continents, and oceans. The units of latitude and longitude are degrees and minutes.

Altazimuth and Equatorial mounts are the two main categories of astronomical telescope mounts. The simplest sort of mount, known as an altazimuth (sometimes spelled alt-az), has two motions: azimuth (horizontal) and altitude (vertical).

To learn more about globe refer to:

https://brainly.com/question/10911108

#SPJ4

Answer:

Lamentablemente el problema está incompleto, pues no sabemos la dirección en la que se aplican las fuerzas. Por ello, voy a resolver el problema asumiendo dos casos. (abajo se puede ver una imagen donde se describe cada caso)

1) Todas las fuerzas están en la misma dirección.

Entonces la fuerza neta será la suma de las 3 fuerzas, entonces:

F = 48N + 60N + 30N = 138N

Y por la segunda ley de Newton sabemos que:

F = m*a

fuerza igual a masa por aceleración.

Entonces la aceleración está dada por:

a = F/m = 138N/12kg = 11.5 m/s^2

2) Segundo caso, suponemos que F1 es opuesta a F2 y F3

En este caso, la fuerza neta será:

F = F2 + F3 - F1 = 60N + 30N - 48N = 42N

En este caso, la aceleración será:

a = 42N/12kg = 3.5 m/s^2

Answer:

Explanation:

m = mass of the body

g = acceleration of gravity

h = height above surface of earth

m and g are constants while h can vary as the body is moving.  Unless h is extremely large, you can take g to be a constant 9.81 m/s2

The correct option is option e) cross product

The cross-product is a new way of "multiplying" two vectors. It results in a new vector that is perpendicular to both the original vectors and its magnitude is given by the area of the parallelogram formed by the two original vectors.

In three-dimensional space, cross-product is a binary operation on two vectors. It yields a vector perpendicular to both vectors. a b represents the vector product of two vectors, a and b. Its resulting vector is parallel to a and b. Cross goods are another name for vector products.

The cross-product has four basic applications:

Read more about Cross-Product from:

https://brainly.com/question/14708608

#SPJ4

The stars in the center of the Milky Way galaxy is approximately 94.5 billion stars. The result is obtained by dividing the mass of the galactic center by the mass of the Sun.

The number of stars in a galaxy can be estimated by dividing the mass of galactic center by the mass of a typical star.

In the Milky Way,

Suppose that the Sun is a typical star with a typical mass and the galactic matter is made up of stars. Find the approximate number of stars in the center of the galaxy!

From the scientific data, the mass of the Sun is 1.99 × 10³⁰ kg.

The number of stars is approximately

N = Mass of the galactic center / Mass of the Sun

N = 1.88 × 10⁴¹ kg / 1.99 × 10³⁰ kg

N = 0.945 × 10¹¹

N = 94.5 × 10⁹

N = 94.5 billion stars

In the center of Milky Way, the number of stars is around 94.5 billion stars.

Learn more about stars in a galaxy here:

brainly.com/question/26063716

#SPJ4

The acceleration which is acting on the object which is moving on the ramp is same for both the motion whether is going upwards or moving downwards.

Rolling motion happens when an object roll over from a ramp or any other sloppy surface whether it is rough or smooth. many forces act on it at the same moment. also in many forces rolling tangential force and gravitational force is also acting on it at the same moment. in which the gravitational force is acting on it at a bigger pace and plays an important role in rolling of the object from the ramp or any other sloppy surface. here we can see that the only force that is making impact on the object is the gravitational force. Hence, by this information we consider that the  acceleration which is acting on the object which is moving on the ramp is same for both the motion whether is going upwards or moving downwards.

Learn more about Rolling motion:

brainly.com/question/29568301

#SPJ4

A polarizing filter can be beneficial for a photographer when taking outdoor pictures because it can reduce glare and reflections from surfaces such as water and glass.

it can also enhance colors, darken blue skies, and reduce the amount of light entering the lens, allowing for more even exposure. This can be especially useful in situations where the sun is very bright and can create harsh shadows and overexposed highlights. The polarizing filter can also reduce the amount of haze in the atmosphere, which can improve the overall clarity of the image. These effects can help a photographer capture more vivid and detailed images, making them stand out from the crowd.

to know more about  polarizing filters refer to  the  link brainly.com/question/13963189

#SPJ4

The magnitude of the torque will increase as the angle between the force and the line of action of the torque approaches 90 degrees.

Torque is a measure of the rotational force acting on an object and is defined as the product of the force and the distance from the axis of rotation to the point where the force is applied. The torque is also proportional to the sine of the angle between the force and the line of action of the torque.

When the angle between the force and the line of action of the torque is 0 degrees, the torque is zero, as the force is acting in the same direction as the line of action of the torque. As the angle increases, the torque increases and reaches its maximum value when the angle is 90 degrees, at this point the sine of the angle is 1, so the torque is at its maximum value.

In practical terms, if you imagine a door knob, when you push or pull the door knob closer to 90 degree angle with the door, it will be harder to open or close the door, than when you push or pull the door knob at a small angle.

To know more about Torque click below:

brainly.com/question/6855614#

#SPJ4

Answer: C. Pangaea

Explanation: This is the term for when all the continents were one. Please give brainliest <3

Answer:

8.3 m/s

Explanation:

Here's the answer in m/s:

(10 km)(1000 m/km) = 10000 m

(20 min)(60 s/min) = 1200 s

speed = d/t = 10000m / 1200s = 8.3 m/s

The distance that separates the force's line of action from its rotational axis is known as the lever arm. and the torque's magnitude is = N m.

τ = F x r

Signs:-  Torque = τ

Force = F

Lever Arm Length = r

In many electromechanical driving systems, lever arms are used. Axles and spindles are nonrotating shafts, while transmission shafts are rotating components that move power and torque from one place to another. Shafts can be either hollow or solid. In gate drive applications, particularly for radial gates and vertical gates, hollow shafts are sometimes referred to as torque tubes.

This is so that they can transfer torque to a hoist winch, which is their main function in these gate drives. For gate drives, the shafting may be subjected to axial forces, torsion from transmitted torque, bending from transverse loads from gears, sprockets, and sheaves, and torsion owing to transmitted torque.

know more about torque here

https://brainly.com/question/25708791#

#SPJ4