Answer:
$300
Explanation:
Calculation for what amount should Shear report as deferred income tax expense
Using this formula
Deferred income tax expense=(installment sale Profit-Loss expenses on accounts receivable)*Tax rate
Let plug in the formula
Deferred income tax expense=(2,600-1,400)*25%
Deferred income tax expense=1,200*25%
Deferred income tax expense=$300
Therefore the amount that Shear should report as deferred income tax expense will be $300
Dexter Industries purchased packaging equipment on January 8 for $108,000. The equipment was expected to have a useful life of three years, or 27,000 operating hours, and a residual value of $5,400. The equipment was used for 10,800 hours during Year 1, 8,100 hours in Year 2, and 8,100 hours in Year 3.
Required:
Determine the amount of depreciation expense for the three years ending December 31, by:
(a) the straight-line method,
(b) the units-of-activity method, and
(c) the double-declining-balance method. Also determine the total depreciation expense for the three years by each method. Round the final answers for each year to the nearest whole dollar.
Answer:
a.
Year 1 = $34,200
Year 2 = $34,200
Year 3 = $34,200
Total = $102,600
b.
Year 1 = $41,040
Year 2 = $30,780
Year 3 = $30,780
Total = $102,600
c.
Year 1 = $71,993
Year 2 = $24,002
Year 3 = $6,605
Total = $102,600
Explanation:
Straight Line Method
Depreciation Expense = Cost - Residual amount ÷ Estimated useful life
therefore,
Depreciation Expense = ($108,000 - $5,400) ÷ 3 = $34,200
This charge will be the same from Year 1 through Year 3 because its straight line !
Units-of-activity method
Depreciation Charge = Activity rate x activity during the period
where,
Activity rate = Cost - Residual amount ÷ Estimated operating hours
= ($108,000 - $5,400) ÷ 27,000 hours
= $3.80
Year 1
Depreciation Charge = $3.80 x 10,800 hours = $41,040
Year 2
Depreciation Charge = $3.80 x 8,100 hours = $30,780
Year 3
Depreciation Charge = $3.80 x 8,100 hours = $30,780
Double Declining Balance Method
Depreciation Charge = 2 x SLDP X BVSLDP
where,
SLDP = 100 ÷ number of years
= 100 ÷ 3
= 33.33 %
Year 1
Depreciation Charge = 2 x 33.33 % x $108,000
= $71,992.80
Year 2
Depreciation Charge = 2 x 33.33 % x ($108,000 - $71,992.80)
= $24,002
Year 3
Depreciation Charge = 2 x 33.33 % x ($108,000 - $71,992.80 - $24,002)
= $8,002.67
However
In Year 3 depreciation will decrease the book value of the asset below its salvage value :
Do the Test :
Year 2 Book Value $12,005
Less Year 3 Depreciation ($8,003)
Year 3 Book Value $4,002
With double-declining-balance method, Depreciation will only be allowed to the point where :
Book Value = Salvage amount
Therefore, Depreciation for year 3 will be :
Year 2 Book Value $12,005
Less Salvage amount ($5,400)
Year 3 Depreciation $6,605
Which of the following statements is true? (Select the best choice below.) A. Westlake Corporation generated a positive cash flow from operations (), but it experienced a large reduction in cash (). B. Westlake Corporation generated a negative cash flow from operations (), but it was off-set by the sale of fixed assets (). C. Westlake Corporation generated a positive cash flow from operations (), but an even a greater amount was used to invest in fixed assets (), resulting in a need to raise funds through financing activities. D. Westlake Corporation generated a positive cash flow from operations (), but it was off-set by the negative cash flows from investing activities (
Answer: C. Westlake Corporation generated a positive cash flow from operations , but an even a greater amount was used to invest in fixed assets , resulting in a need to raise funds through financing activities.
Explanation:
From the Cashflows of Westlake shown here, we see that the cashflow from operations is $592. This means that there was a positive cashflow from operations.
$1,066 was however used to invest in fixed assets which is higher than the cash generated from operating cashflow.
As a result, the company did not have enough cash to finance the fixed assets and so they raised money through financing activities by acquiring debt of $643.
Air Atlantic has leased out a 3-year old jet under a 10-year arrangement. The lease requires the lessee to pay Air Atlantic annual payments of $450,000 beginning next year. If Air Atlantic can invest at 10 percent annually, what is the lease arrangement worth to it
Answer:
$2,513,582.06
Explanation:
Below, you are provided with four groups of different goods. These goods are differentiated by the number of likely substitutes that each has, and by the fraction of income that consumers spend on each. You will rank the goods within each group by their expected price elasticities of demand.
Consider the following three goods:
1. a red convertible car
2. a car
3. a convertible car.
Rank the demand of these three goods by their expected price elasticities of demand from most elastic to least elastic.
Answer and Explanation:
The red and the convertible cars would be considered similar i.e. they are perfect substitutes also the car and the convertible car would be the substitutes but it is not a perfect as the convertible car would be the subset of the car group plus the expenditure made on the convertible car would be high so here the elasticity is more
Item1 Return to questionItem 1 Cash flows during the first year of operations for the Harman-Kardon Consulting Company were as follows: Cash collected from customers, $305,000; Cash paid for rent, $33,000; Cash paid to employees for services rendered during the year, $113,000; Cash paid for utilities, $43,000. In addition, you determine that customers owed the company $53,000 at the end of the year and no bad debts were anticipated. Also, the company owed the gas and electric company $1,300 at year-end, and the rent payment was for a two-year period. Calculate accrual net income for the year.
Answer:
$184,200
Explanation:
Revenues:
= ($305,000 + $53,000) = $358,000
Expenses:
Rent = ($33,000/2) = ($16,500)
Salaries = ($113,000)
Utilities = ($43,000 + $1,300) = ($44,300)
Total Expenses = $16,500 + $113,000 + $44,300= $173,800
Accrual Net income = $358,000 - $173,800
Accrual Net income = $184,200
Tierney Construction, Inc. recently lost a portion of its financial records in an office theft. The following accounting information remained in the office files:
Cost of goods sold $88,250
Work in process inventory, January 1, 2016 21,800
Work in process inventory, December 31, 2016 17,250
Selling and Administrative Expenses 20,400
Net Income 35,500
Factory overhead 21,650
Direct materials inventory, January 1, 2016 28,200
Direct materials inventory, December 31, 2016 15,375
Cost of goods manufactured 107,350
Finished goods inventory, January 1, 2016 35,675
Direct labor cost incurred during the period amounted to 2.5 times the factory overhead. The CFO of Tierney Construction, Inc. has asked you to recalculate the following accounts and to report to him by the end of tomorrow.
What should be the amount in the finished goods inventory at December 31, 2016?
Answer:
$54,775
Explanation:
The computation of the finished goods inventory is shown below:
As we know that
Cost of Goods sold = Cost of goods manufactured + Opening stock of Finished goods - Closing stock of Finished goods
Now
Ending Stock of Finished goods = Cost of goods manufactured + Opening stock of Finished goods - Cost of Goods sold
So,
Ending Stock of Finished goods is
= $107,350 + $35,675 - $88,250
= $54,775
Single plantwide factory overhead rate Bach Instruments Inc. makes three musical instruments: flutes, clarinets, and oboes. The budgeted factory overhead cost is $127,800. Overhead is allocated to the three products on the basis of direct labor hours. The products have the following budgeted production volume and direct labor hours per unit:_______.
Budgeted Production Volume Direct Labor Hours Per Unit
Flutes 2,100 units 0.8
Clarinets 800 1.4
Oboes 1,300 1.0
If required, round all per unit answers to the nearest cent.
a. Determine the single plantwide overhead rate.
$ per direct labor hour
b. Use the overhead rate in (a) to determine the amount of total and per-unit overhead allocated to each of the three products.
Total
Factory Overhead Cost Per Unit
Factory Overhead Cost
Flutes $ $
Clarinets
Oboes
Total $
Answer:
A.$31.2 per hour
B. Factory Overhead Cost Per Unit
Flutes $24.96
Clarinets $43.68
Oboes $32.74
Factory Overhead Cost
Flutes 52,416
Clarinets 34,944
Oboes 40,560
Explanation:
A. Calculation to Determine the single plantwide overhead rate.
First step is to calculate the Total Hours
Total Direct Labor Hours
Flutes 2100 units *0.8 hour per unit= 1,680
Clarinets 800 units *1.4 hours per unit = 1,120
Oboes 1300 units *1.0 hour per unit= 1,300
Total Hours 4,100
Now let calculate the Plantwide overhead rate using this formula
Plantwide overhead rate = Total Overhead Cost / Total labor hours
Let plug in the formula
Plantwide overhead rate=$127,800/4,100
Plantwide overhead rate=$31.2 per hour
Therefore Plantwide overhead rate will be $31.2 per hour
B. Calculation to determine the amount of total and per-unit overhead allocated to each of the three products.
Product Total Labor Hours Total Overhead Overhead Per Unit
Flutes 1,680 52,416 (1,680*31.2) $24.96 (52416/2100)
Clarinets 1,120 34,944(1,120*31.2) $43.68 (34,944/800)
Oboes 1,300 40,560
(1,300*31.2) $32.74 (40,560/1,300)
Total 4,100 127,920 $101.38
Therefore Factory Overhead Cost Per Unit and Factory Overhead Cost Will be:
Factory Overhead Cost Per Unit
Flutes $24.96
Clarinets $43.68
Oboes $32.74
Factory Overhead Cost
Flutes 52,416
Clarinets 34,944
Oboes 40,560
Sarafiny Corporation is in the process of preparing its annual budget. The following beginning and ending inventory levels are planned for the year. Beginning Inventory Ending Inventory Finished goods (units) 20,000 30,000 Raw material (grams) 50,000 40,000 Each unit of finished goods requires 7 grams of raw material. The company plans to sell 270,000 units during the year. How much of the raw material should the company purchase during the year
Answer:
1,950,000 grams
Explanation:
The computation of the material should be purchased is given below:
Raw materials purchased is
= Ending inventory of raw materials + Materials to be used - Beginning Inventory of raw materials
where,
Raw materials to be used = units produced × 7 grams
Units produced is
= Ending inventory of finished goods + units sold - beginning inventory of finished goods
= 30,000 units + 270,000 units - 20,000 units
= 280,000
Now raw materials used is
= 280,000 × 7 grams
= 1,960,000 grams
Now
Materials purchased = Ending inventory of raw materials + Materials to be used - Beginning Inventory of raw materials
= 40,000 grams + 1,960,000 grams - 50,000 grams
= 1,950,000 grams
The following information is available for Barnes Company for the fiscal year ended December 31: Beginning finished goods inventory in units 0 Units produced 7,800 Units sold 5,500 Sales $ 1,100,000 Materials cost $ 156,000 Variable conversion cost used $ 78,000 Fixed manufacturing cost $ 702,000 Indirect operating costs (fixed) $ 110,000 The absorption costing operating income is:
Answer:
See below
Explanation:
Material cost
$156,000
Add:
Variable conversion cost used
$78,000
Add:
Fixed manufacturing cost
$702,000
Total manufacturing cost
$936,000
Unit product cost
= Total manufacturing cost / Units produced
= $936,000/7,800
= $120
Ending inventory in unit produced
= Units produced - Units sold
= 7,800 - 5,500
= 2,300 units
Ending inventory under absorption costing
= 2,300 units × $120
= $276,000
Shun Corporation manufactures and sells a hand held calculator. The following information relates to Shun's operations for last year: Unit product cost under variable costing $ 5.20 per unit Fixed manufacturing overhead cost for the year $ 260,000 Fixed selling and administrative expense for the year $ 180,000 Units (calculators) produced and sold 400,000 What is Shun's absorption costing unit product cost for last year
Answer:
$5.85
Explanation:
Calculation for Shun's absorption costing unit product cost for last year
Absorption costing unit product cost =$5.20+ (260,000/400,000)
Absorption costing unit product cost =5.20+ 0.65
Absorption costing unit product cost =$5.85
Therefore the absorption costing unit product cost for last year is $5.85
Absorption cost is a managerial accounting approach that covers both variable and fixed overhead costs associated with the production of a specific product. Shun's absorption costing unit product cost is $5.85.
What is absorption costing unit product cost for last year?Shun's absorption costing unit product cost calculation for the previous year is shown below.
[tex]\text{Absorption costing unit product cost} = 5.20+ (\frac{260,000}{400,000} )\\\\\text{Absorption costing unit product cost} = 5.20+ 0.65\\\\\text{Absorption costing unit product cost} = 5.85[/tex]
As a result, the cost of absorption costing unit product last year was $5.85.
For more information about absorption costing, refer below
https://brainly.com/question/26276034
The following information was taken from the accounting records of Eb8-L4z Company for the year ended December 31, 2027:
Patent $59,000
Cost of goods sold $46,000
Inventory $55,000
Retained earnings $42,000 (at January 1, 2027)
Service revenue $37,000
Notes payable . ?
Land $88,000
Accounts receivable . $73,000
Rental revenue . ?
Utilities payable . $21,000
Salaries expense . $51,000
Accounts payable . $62,000
Equipment . $60,000
Utilities expense . $91,000
Supplies . $31,000
Income tax expense . $18,000
Dividends . $25,000
Common stock . $13,000
Cash . $82,000
Required:
Calculate the amount of gross profit reported in Eb8-L4z Company' s 2027 income statement.
Answer:
Amount of Gross Profit reported in Eb8-L4z Company 2027 Income Statement is $45,000
Explanation:
Note: "Correct question is attached as picture below"
Particulars Amount
Sales revenue $91,000
Cost of goods sold $46,000
Gross Profit $45,000
In the market for financial capital,
a. those who supply financial capital pay interest on loans.
b. those who demand financial capital receive interest on loans.
c. the demand for financial capital comes from savings, and the supply goes to making loans.
d. the supply of financial capital comes from savings, and the demand goes to making loans.
Answer:
d. the supply of financial capital comes from savings, and the demand goes to making loans.
Explanation:
Capital markets refer to the areas where deposits and investment are transferred between the capital providers and others in need of capital. Capital markets consist of the main market, where new shares are released and exchanged, and the secondary market, where already issued securities are exchanged by investors.
Flynn Industries has three activity cost pools and two products. It expects to produce 3,000 units of Product BC113 and 1,500 of Product AD908. Having identified its activity cost pools and the cost drivers for each pool, Flynn accumulated the following data relative to those activity cost pools and cost drivers.
Estimated Expected Use of Cost Product Product
Activity Cost Pool Cost Drivers Overhead Drivers per Activity BC113 AD908
Machine setup Setups $16,000 40 25 15
Machining Machine hours 110,000 5,000 1,000 4,000
Packing Orders 30,000 500 150 350
Using the above data, do the following:
(a) Prepare a schedule showing the computations of the activity-based overhead rates per cost driver.
(b) Prepare a schedule assigning each activity's overhead cost to the two products.
(c) Compute the overhead cost per unit for each product. (Round to nearest cent.)
(d) Comment on the comparative overhead cost per product.
Answer:
Flynn Industries
a) Schedule of Activity-based Overhead Rates per Cost Driver:
Machine setup $16,000/40 = $400 per machine setup
Machining $110,000/5,000 = $22 per machine hour
Packing $30,000/500 = $60 per order
b) A Schedule Assigning Activities Overhead Cost to the Products:
Product Product
BC113 AD908
Cost Pool Overhead Rate Usage Costs Usage Costs
Machine setup $400/m.setup 25 = $10,000 15 = $6,000
Machining $22/mhour 1,000 = 22,000 4,000 = 88,000
Packing $60/order 150 = 9,000 350 = 21,000
Total overhead allocated $41,000 $115,000
c) Computation of the Overhead Cost per unit:
Product Product
BC113 AD908
Total overhead allocated $41,000 $115,000
Expected units to be produced 3,000 1,500
Overhead cost per unit $13.67 $76.67
d) A close look at the overhead cost per product shows that Product AD908 causes more activities in machining and packing and also is allocated more overhead costs accordingly. On the other hand, Product BC113 uses machine setup and has got higher machine setup cost assigned to it.
Explanation:
a) Data and Calculations:
Activity Cost Cost Estimated Expected Use of Cost Product Product
Pool Drivers Overhead Drivers per Activity BC113 AD908
Machine
setup Setups $16,000 40 25 15
Machining Machine
hours 110,000 5,000 1,000 4,000
Packing Orders 30,000 500 150 350
Sheffield Inc. took a physical inventory at the end of the year and determined that $845000 of goods were on hand. In addition, the following items were not included in the physical count. Sheffield, Inc. determined that $95500 of goods purchased were in transit that were shipped f.o.b. destination (goods were actually received by the company three days after the inventory count). The company sold $39500 worth of inventory f.o.b. destination that did not reach the destination yet. What amount should Sheffield report as inventory at the end of the year
Answer:
$980,000
Explanation:
Calculation for What amount should Bell report as inventory at the end of the year
Goods on hand $845,000
Add Goods in transit $95,500
Add Goods out on consignment $39,500
Ending Inventory $980,000
($845,000+$95,500+$39,500)
Therefore the amount that Bell should report as inventory at the end of the year will be $980,000
A design engineer wants to construct a sample mean chart for controlling the service life of a halogen headlamp his company produces. He knows from numerous previous samples that this service life is normally distributed with a mean of 500 hours and a standard deviation of 20 hours. On three recent production batches, he tested service life on random samples of four headlamps, with these results: Sample SERVICE LIFE 49 525 470 500 515 480 505 500 505 513 460 470
1. What is the sample mean service life for sample 2?
A) 460 hours
B) 495 hours
C) 515 hours
D) 525 hours
2. What is the mean of the sampling distribution of sample means for whenever service life is in control?
A) 250 hours
B) 470 hours
C) 495 hours
D) 500 hours
E) 515 hours
3. If he uses upper and lower control limits of 520 and 480 hours, on what sample(s) (if any) does service life appear to be out of control?
A) sample 1
B) sample2
C) sample 3
D) both samples 2 and 3
E) all samples are in control
Answer:
1) 515 hours
2) 495 hours
3) Sample 3
Explanation:
As given,
Sample Service life
1 495 500 505 500
2 525 515 505 515
3 470 480 460 470
a.)
Sample mean service for sample 2 = [tex]\frac{525+515+505+515}{4} = \frac{2060}{4}[/tex] = 515
Correct option is C.
b.)
Mean of the sampling distribution = Average of all the samples
Average of sample 1 = [tex]\frac{495+500+505+500}{4} = \frac{2000}{4}[/tex] = 500
Average of sample 2 = [tex]\frac{525+515+505+515}{4} = \frac{2060}{4}[/tex] = 515
Average of sample 3 = [tex]\frac{470+480+460+470}{4} = \frac{1880}{4}[/tex]= 470
Now,
Mean of the sampling distribution = [tex]\frac{500+515+470}{3} = \frac{1485}{3}[/tex] = 495
Correct option is C.
c.)
For the sample to be in control, the Average has to be lie in between the upper and lower control limit
As
470 does not lie between 480 and 520
∴ we get
Sample 3 will be out of control.
Correct option is C.
what is grants related to assets
Answer:
A government grant may take the form of a transfer of a non-monetary asset, such as land or other resources, for the use of the entity. In these circumstances it is usual to assess the fair value of the non- monetary asset and to account for both grant and asset at that fair value.
Explanation:
I hope this helps and pls mark me brainliest :)
Consider the following income statement for the Heir Jordan Corporation: HEIR JORDAN CORPORATION Income Statement Sales $ 47,600 Costs 35,600 Taxable income $ 12,000 Taxes (24%) 2,880 Net income $ 9,120 Dividends $ 2,000 Addition to retained earnings 7,120 The projected sales growth rate is 20 percent. Prepare a pro forma income statement assuming costs vary with sales and the dividend payout ratio is constant. (Input all answers as positive values. Do not round intermediate calculations.)
Answer:
$10,944
Explanation:
Preparation of a pro forma income statement assuming costs vary with sales and the dividend payout ratio is constant
PROFORMA INCOME STATEMENT.
Sales $57,120
(1.20* $ 47,600)
Less Costs $42,720
($35,600/$47,600)*$57,120
Taxable Income $14,400
($57,120-$42,720)
Taxes $3,456
(24%*$14,400)
Net Income $10,944
($14,400-$3,456)
Therefore pro forma income statement assuming costs vary with sales and the dividend payout ratio is constant will be $10,944.
A company produces a single product. Variable production costs are $13.40 per unit and variable selling and administrative expenses are $4.40 per unit. Fixed manufacturing overhead totals $50,000 and fixed selling and administration expenses total $54,000. Assuming a beginning inventory of zero, production of 5,400 units and sales of 4,300 units, the dollar value of the ending inventory under variable costing would be:_____.
a. $14,740.
b. $24,640.
c. $19,580.
d. $9,900.
Answer:
Ending inventory= $19,580
Explanation:
The variable costing method incorporates all variable production costs (direct material, direct labor, and variable overhead).
We need to calculate the total unitary variable cost:
Total unitary variable cost= 13.4 + 4.4
Total unitary variable cost= $17.8
Now, the cost of ending inventory:
Ending inventory= 1,100*17.8
Ending inventory= $19,580
In the week to come, a bank expects $55 million in incoming deposits, $75 million in acceptable loan requests, $35 million in money market borrowings, $10 million in deposit withdrawals, and $30 million in loan repayments. The bank is expecting a: A. liquidity deficit. B. liquidity surplus. C. balanced liquidity position. D. liquidity reversal. E. None of the above.
Answer:
B. liquidity surplus
Explanation:
The expected cash inflows and outflows of the bank can be summarized using the formula provided below:
Net inflow/(outflow)= incoming deposits-acceptable loan requests+ market borrowings-deposit withdrawals+loan repayments
incoming deposits=$55 million(inflow)
acceptable loan requests=$75 million(outflow)
money market borrowings=$35 million(inflow)
deposit withdrawals= $10 million(outflow)
loan repayment=$30 million(inflow)
Net inflow/(outflow)=$55 million-$75 million+$35 million-$10 million+$30 million
net inflow(outflow)=$35 million
The above net inflow of $35 million represents liquidity surplus
g Congratulations, you've just won the $2,200,000 state lottery! The lottery commission offers you the choice of $98,000 per year for 30 years or a one-time, lump-sum payment of $880,000 If your intensions are to save all of the lottery winnings (regardless of annual cash flow or lump-sum) for retirement in an account that earns 3.00% annually, which payment option should you choose
Answer:
the choice of $98,000 per year for 30 years
Explanation:
To determine the option i would prefer, i have to find the present value of fiest opotion and compare it with the value of the second option.
To find the present value of the first option, the future value has to be determined first.
The formula for determining the future value of an annuity is :
The formula for calculating future value = A (B / r)
A = amount
B = annuity factor
r = interest rate
Annuity factor = {[(1+r)^n] - 1} / r
n = number of years
$98,000 x[ (1.03)^30 - 1 ] / 0.03 = $4,662,390.74
Now we determine the present value
PV = FV x ( 1+r)^-n
$4,662,390.74 x (1.03)^-30 = $1920,843.25
The payoff of the first option is greater than that of the second so i would choose the first
What is the difference between a capital gains tax and a sales tax?
Answer:
Long-term capital gains are usually taxed at a lower rate. Any capital gain you make on a short-term property is taxed at your regular income tax rate. However, if you can hold on to a property for more than one year, you could pay significantly less.
Explanation:
Answer:
Capital gains tax is a lower tax price, because it is the sales price minus the original cost. A sales tax on the other hand is a higher tax that is going to the government.
Explanation:
PLEASE HELP!!!!
How is a check treated by the US government?
a. as currency
b. as a legal contract
c. as a negotiable instrument
d. as a promise from the payee to the payer
Answer:
legal contract
Explanation:
should be it or currency
Suppose that, in a competitive market without government regulations, the equilibrium price of gasoline is $3.00 per gallon.
Complete the following table by indicating whether each of the statements is an example of a price ceiling or a price floor and whether it is binding or nonbinding.
Statement
Price Control
Binding or Not
The government prohibits gas stations from selling gasoline for more than $2.50 per gallon.
selector 1
Price ceiling
Price floor
selector 2
Binding
Non-binding
The government has instituted a legal minimum price of $3.40 per gallon for gasoline.
selector 3
Price ceiling
Price floor
selector 4
Binding
Non-binding
There are many teenagers who would like to work at gas stations, but they are not hired due to minimum-wage laws.
selector 5
Price ceiling
Price floor
selector 6
Answer:
Price ceiling binding
price floor binding
price floor binding
Explanation:
A price floor is when the government or an agency of the government sets the minimum price of a product. A price floor is binding if it is set above equilibrium price. The legal minimum price is above $3. Thus, it is a binding price floor
As a result of the minimum price legislation, labour can't be hired. This is an example of a binding price floor
Price ceiling is when the government or an agency of the government sets the maximum price for a product. It is binding when it is set below equilibrium price. The government sets the maximum price has $2.50. This is below the equilibrium price. thus, it is a binding price ceiling
A company maintains its records using accrual basis accounting; however, their accountant wants to create a statement of cash flows and needs to determine the cash flow from operating activities. For simplicity, we assume only one expense account (salaries). The following is data gathered from their records.
Services provided to customers during the period $600,00
Salaries expense for the period 350,000
Accounts receivable beginning balance 45,000
Accounts receivable (ending balance) 20,000
Salaries payable( beginning balance) 14,000
Salaries a able (ending balance) 8,000
Required:
a. Determine the amount of cash collected from customers during the period.
b. Determine the amount for cash paid for salaries during the period.
c. Determine accrual basis net income for the period.
d. Determine cash basis net income for the period.
Answer and Explanation:
The computation is shown below;
a. The amount of cash collection from customers is
= $45,000 + $600,000 - $20,000
= $625,000
b. The amount of cash paid for salaries is
= $14,000 + $350,000 - $8,000
= $356,000
c, The accrual basis net income is
= $600,000 - $350,000
= $250,000
d. The cash basis net income is
= $625,000 - $356,000
= $269,000
Tom and Linda are married taxpayers who file a joint return. They have itemized deductions of $13,050 and four exemptions. Assuming an adjusted gross income of $40,000, what is their taxable income for 2017
Answer:
$13,000
Explanation:
Standard deduction for Married filling jointly = 24,000
Adjusted gross income = $40,000
Greater of itemized deduction ($13,050) and Standard deduction ($24,000) = $27,000
Taxable income = Adjusted gross income - The greater of the 2 above
Taxable income = $40,000 - $27,000
Taxable income = $13,000
So therefore, their taxable income for 2017 is $13,000
Marv Company's direct labor costs for manufacturing its only product were as follows for October: Standard direct labor hours per unit of product 2 Budgeted finished units for the period 6,000 Number of finished units produced 5,000 Standard rate per direct labor hour (SP) $20 Direct labor costs incurred $207,000 Actual wage rate per direct labor hour (AP) $18 The direct labor efficiency variance for October was: $20,000 favorable. $3,000 unfavorable. $23,000 favorable. $50,000 unfavorable. $30,000 unfavorable.
Answer:
$30,000 unfavorable.
Explanation:
Calculation for what The direct labor efficiency variance for October was
Using this formula
Direct labor efficiency variance = (Standard hours for actual production - Actual hours) × Standard rate per hour
Let plug in the formula
Direct labor efficiency variance=(5,000 × 2 - $207,000 ÷ $18.00) × $20
Direct labor efficiency variance= (10000 - $11,500) × $20
Direct labor efficiency variance= $1,500 × $20
Direct labor efficiency variance= $30,000 unfavorable
Therefore The direct labor efficiency variance for October was $30,000 unfavorable
Prepare the Income Statement from the Adjusted Trial Balance. Within each section of the statement, use the drop-down menus to enter the accounts and select the account balances. SMART TOUCH LEARNING Adjusted Trial Balance December 31, 2016 Balance Account Title Debit Credit Cash 14,000 Accounts Receivable 7,700 Office Supplies 100 Prepaid Rent 9,300 Furniture 16,300 Accumulated Depreciation--Furniture 5,600 Accounts Payable 1,800 Salaries Payable 400 Interest Payable 200 Unearned Revenue 4,600 Notes Payable 6,500 Common Stock 9,100 Retained Earnings 9,300 Dividends 23,900 Service Revenue 42,500 Depreciation Expense--Furniture 1,800 Interest Expense 200 Rent Expense 2,800 Salaries Expense 3,200 Supplies Expense 700 Total 80,000 80,000 Revenue: Expenses:
Answer:
Smart Touch Learning
SMART TOUCH LEARNING Income Statement December 31, 2016
Service Revenue 42,500
Depreciation Expense--Furniture 1,800
Interest Expense 200
Rent Expense 2,800
Salaries Expense 3,200
Supplies Expense 700
Total Expenses 8,700
Net Income $33,800
Explanation:
a) Data and Calculations:
SMART TOUCH LEARNING Adjusted Trial Balance December 31, 2016 Balance Account Title Debit Credit
Cash 14,000
Accounts Receivable 7,700
Office Supplies 100
Prepaid Rent 9,300
Furniture 16,300
Accumulated Depreciation--Furniture 5,600
Accounts Payable 1,800
Salaries Payable 400
Interest Payable 200
Unearned Revenue 4,600
Notes Payable 6,500
Common Stock 9,100
Retained Earnings 9,300
Dividends 23,900
Service Revenue 42,500
Depreciation Expense--Furniture 1,800
Interest Expense 200
Rent Expense 2,800
Salaries Expense 3,200
Supplies Expense 700
Total 80,000 80,000
b) The income statement of Smart Touch Learning shows the difference between its revenue and expenses for a given accounting period. It is used to determine the net income that the company has generated over a particular period.
The widget market is competitive and includes no transaction costs. Five suppliers are willing to sell one widget at the following prices: $20, $12, $8, $4, and $2 (one seller at each price). Five buyers are willing to buy one widget at the following prices: $8, $12, $20, $32, and $44 (one buyer at each price).
For each price shown in the following table, use the given information to enter the quantity demanded and quantity supplied.
Price Quantity Demanded Quantity Supplied
($ per widget) (widgets) (widgets)
$2
$4
$8
$12
$20
$32
$44
In this market, the equilibrium price will beper widget, and the equilibrium quantity will be (0 or 5 or 2 or 1 or 3 or 4) widgets.
Answer:
Price Quantity Demanded Quantity Supplied
$2 5 1
$4 5 2
$8 5 3
$12 4 4
$20 3 5
$32 2 5
$44 1 5
the equilibrium price is $12 with 4 units demanded and supplied
How do you start an apprenticeship
Answer:
To Start a Program
Contact the Division of Apprenticeship Standards. ...
Determine the Essential Job Skills. ...
Identify Educational Partners and the Desired Classroom Component of Training. ...
Establish Apprenticeship Program Standards. ...
Submit Your Program to DAS for Approval.
In an apprenticeship, you receive on-the-job training in a trade.Trade unions, contractors, and private companies provide apprenticeship programs. While you don't need any experience in the trade to become an apprentice, many people in this career path gain general labor experience before applying.
In order to design your own apprenticeship, you'll need to build a group of 10 employers. The group should reflect the scope of the industry, and include at least 2 employers with less than 50 employees. When the group has been formed, everyone must play an active role and work together to develop the standard.
Explanation:
Randall Company manufactures products to customer specifications. A job costing system is used to accumulate production costs. Factory overhead cost was applied at 125% of direct labor cost. Selected data concerning the past year's operation of the company are presented below. January 1 December 31 Direct materials $ 84,000 $ 47,000 Work in process 73,000 49,000 Finished goods 122,000 107,000 Other information Direct materials purchases $ 331,000 Cost of goods available for sale 964,000 Actual factory overhead costs 267,000
The amount of underapplied or overapplied overhead is:______.
Solution :
The cost of the manufactured goods = cost of the available goods for sale - beginning of finished goods
= 964,000 - 122,000
= $ 842,000
Total cost of manufacturing = cost of the goods manufactured + ending work in process - beginning work in process
= 842,000 + 49,000 - 73,000
= $ 818,000
The direct material used = 84,000 + 331,000 - 47,000
= $ 368,000
Now, the direct materials used + direct labor cost + factory overhead applied = the total material cost
368,000 + direct labor cost + 125% of direct labor = 818,000
225% of the direct labor cost = 818,000 - 368,000
= $ 450,000
Direct labor = [tex]$\frac{450,000}{225}$[/tex]% = $ 200,000
Therefore the factory overhead applied = 200,000 x 125%
= [tex]$\$ 250,000$[/tex]
The underapplied overhead = [tex]$\text{actual overhead} - \text{applied overhead}$[/tex]
= [tex]$\$ \ 260,000 - \$ \ 250,000$[/tex]
= $ 10,000