Answer:
negative charge electrode
Explanation:
In cathode positive ions are picked up to perform reduction.At the same time negative ions are picked up at anode to get oxidized from electrolyte.
Answer:
The electrode that removes ions from the solution :) a p e x
Give the formulas for all of the elements that exist as diatomic molecules under normal conditions. See if you can do this without looking anything up.
Answer:
They are:
H2, N2, O2, F2, Cl2, Br2, and I2.
Note: whether the element At molecule is monoatomic or diatomic is incredibly arguable. While some say it exists as diatomic because it is a halogen like bromine, iodine etc, At is in fact extremely unstable and no one has ever really studied the molecules on it, so, when others say it is monoatomic, this is also based on calculations. But the other 7 elements listen above is for sure diatomic.
Hydrogen (H2) , Nitrogen (N2) , Oxygen (O2) , Fluorine (F2) , Chlorine (Cl2) , Iodine (I2) , carbonmonoxide (CO) and Bromine (Br2).
Hydrogen (H2) , Nitrogen (N2) , Oxygen (O2) , Fluorine (F2) , Chlorine (Cl2) , Iodine (I2) , carbonmonoxide (CO) and Bromine (Br2) are the formulas of the elements that is present as diatomic molecules under normal environmental conditions. Diatomic molecules refers to those molecules that is composed of only two atoms of the same or different elements. There are large number of diatomic molecules which is made up of two similar elements or different elements.
Learn more: https://brainly.com/question/17081808
A study of the following system, 4 NH3(g) + 7 O2(g) <--> 2 N2O4(g) + 6 H2O(g), was carried out. A system was prepared with [N2O4] = [H2O] = 3.60 M as the only components initially. At equilibrium, [H2O] is 0.600 M. Calculate the equilibrium concentration of O2(g).
Answer:
3.50 M
Explanation:
Step 1: Write the balanced equation
4 NH₃(g) + 7 O₂(g) ⇄ 2 N₂O₄(g) + 6 H₂O(g)
Step 2: Make an ICE chart
4 NH₃(g) + 7 O₂(g) ⇄ 2 N₂O₄(g) + 6 H₂O(g)
I 0 0 3.60 3.60
C +4x +7x -2x -6x
E 4x 7x 3.60-2x 3.60-6x
Step 3: Calculate the value of x
The concentration of water at equilibrium is 0.600 M. Then,
3.60-6x = 0.600 M
x = 0.500 M
Step 4: Calculate the concentration of O₂ at equilibrium
The concentration of O₂ at equilibrium is 7x = 7(0.500M) = 3.50 M
Why can liquids change shape but solids cannot?
A. The force of gravity is stronger in liquids than in solids.
B. The forces holding the atoms together are stronger in liquids than
in solids.
C. The forces holding the atoms together are weaker in liquids than
in solids.
D. The force of gravity is stronger in solids than in liquids.
The forces holding the atoms together are weaker in liquids than in solids.
Why can't solid things change their shape?In a solid, these particles are packed closely together and are not free to move about within the substance. Molecular motion for the particles in a solid is confined to very small vibrations of the atoms around their fixed positions; therefore, solids have a fixed shape that is difficult to change.
Why can liquids change shape?The forces between liquid particles are weaker than the forces between solid particles. This means that liquid particles are further apart and can move about more easily. Since the particles can move, the liquid can flow and take the shape of its container.
Learn more about liquids here https://brainly.com/question/752663
#SPJ2
Choose the substance with the lowest boiling point.
A. NBr3.
B. CI2H2.
C. H2O2.
D. H2S.
E. O2.
Answer:
E. O2
Explanation:
All substances has a simple molecular structure, where between their molecules are held by van der Waals' forces. But C must be incorrect because between the H2O2 molecules, they are mainly held by hydrogen bonds on top of van der Waals' forces. Hydrogen bonds are stronger than van der Waals' forces, so more energy is required to separate the H2O2 molecules.
In structures A and D, the molecules are polar. Their van der Waals' forces are stronger than Cl2H2 and O2, which are non-polar.
Between the Cl2H2 and O2, O2 has a smaller molecular size. The van der Waals' forces between the O2 molecules are hence the weakest. Least amount of energy is required to break the intermolecular forces between the O2 molecules therefore it has the lowest boiling point.
Cyclohexane (C6H12) undergoes a molecular rearrangement in the presence of AlCl3 to form methylcyclopentane (CH3C5H9) according to the equation: C6H12 ⇌ CH3C5H9 If Kc = 0.143 at 25°C for this reaction predict the direction in which the system
Answer:
The reaction will shift leftwards, towards the formation of more cyclohexane at 25 °C
Explanation:
Hello,
In this case, for the given chemical reaction, we can write the law of mass action (equilibrium expression) as shown below:
[tex]Kc=\frac{[CH_3C_5H_9]}{[C_6H_{12} ]}[/tex]
Thus, since Kc < 1, we can conclude there are more moles of cyclohexane at equilibrium (denominator is greater than numerator), therefore, the reaction will shift leftwards, towards the formation of more cyclohexane at 25 °C.
Best regards.
The charcoal from ashes found in a cave gave 7.4 14C counts per gram per minute. Wood from the outer portion of a growing tree gives a comparable count of 15.3. The half-life of 14C is 5700 years.
How old are the ashes?
A) 3245 y
B) 5700 y
C) 5970 y
D) 9220 y
E) 5437 y
Answer:
C) 5970 y
Explanation:
Given;
initial amount of wood, N₀ = 15.3 cpm/g
remaining amount of wood (charcoal), N = 7.4 cpm/g
half life of carbon 14, t 1/2 = 5700 years
The age of the ashes can be calculated using the following formula;
[tex]N = N_0(\frac{1}{2})^{\frac{t}{t_1_/_2} }\\\\(\frac{1}{2})^{\frac{t}{t_1_/_2} } = \frac{N}{N_0} \\\\(\frac{1}{2})^{\frac{t}{t_1_/_2} } = \frac{7.4}{15.3} \\\\(\frac{1}{2})^{\frac{t}{t_1_/_2} } = 0.48366\\\\t = t_{1/2} Log\frac{1}{2} (0.48366)\\\\t = \frac{t_{1/2}ln(0.48366)}{-ln(2)} \\\\t = t_{1/2}(1.0479)\\\\t = 5700(1.0479)\\\\t = 5973 \ years\\\\t = 5970 \ years(nearest \ ten)[/tex]
Therefore, the ashes are 5970 years
When 50.0 mL of 1.27 M of HCl(aq) is combined with 50.0 mL of 1.32 M of NaOH(aq) in a coffee-cup calorimeter, the temperature of the solution increases by 8.49°C. What is the change in enthalpy for this balanced reaction? HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l) Assume that the solution density is 1.00 g/mL and the specific heat capacity of the solution is 4.18 J/g⋅°C. Hint: You need to determine the limiting reagent.
Answer:
-55.9kJ/mol is the change in enthalpy of the reaction
Explanation:
In the reaction:
HCl(aq) + NaOH(aq) → H₂O(l) + NaCl
Some heat is released per mole of reaction.
To know how many moles reacts we need to find limiting reactant:
Moles HCl = 0.050L ₓ (1.27mol / L) = 0.0635 moles HCl
Moles NaOH = 0.050L ₓ (1.32mol / L) = 0.066 moles NaOH
As there are more moles of NaOH than moles of HCl, HCl is limiting reactant and moles of reaction are moles of limiting reactant, 0.0635 moles
Using the coffee-cup calorimeter equation we can find how many heat was released thus:
Q = C×m×ΔT
Where Q is heat released, C is specific heat of the solution (4.18J/g°C), m is mass of solution (100g because there are 100mL of solution -50.0mL of HCl and 50.0mL of NaOH- and density is 1g/mL) and ΔT is change in temperature (8.49°C)
Replacing:
Q = 4.18J/g°C×100g×8.49°C
Q = 3548.8J of heat are released in the reaction
Now, change in enthalpy, ΔH, is equal to change in heat (As is released heat ΔH < 0) per mole of reaction, that is:
ΔH = Heat / mol of reaction
ΔH = -3548.8J / 0.0635 moles of reaction
Negative because is released heat.
ΔH = -55887J / mol
ΔH =
-55.9kJ/mol is the change in enthalpy of the reaction
The heat of reaction is -54.7 kJ/mol.
The equation of the reaction is;
HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
Number of moles of HCl = 50/1000 L × 1.27 M = 0.064 moles
Number of moles of NaOH = 50/1000 L × 1.32 M = 0.066 moles
The limiting reactant is HCl
Total volume of solution = 100mL
Total mass of solution = 100 g
Temperature rise = 8.49°C
Heat capacity of solution = 4.18 J/g⋅°C
Using;
H = mcdT
m = mass of solution
c = heat capacity of solution
dT = temperature rise
H = 100 g × 4.18 J/g⋅°C × 8.49°C = 3548.82 J
The heat of reaction = -ΔH/n = -(3.5kJ/0.064 moles)
= -54.7 kJ/mol
Learn more: https://brainly.com/question/6284546
1. In general chemistry you learned that oxidation meant any reaction that involves loss of electrons, but in organic chemistry oxidation often refers to an earlier, more literal, definition of the terms in this experiment. What is this earlier, classical definition of oxidation
Answer:
In organic chemistry oxidation is the gain of oxygen atoms by any carbon atom or molecules.
Explanation:
Oxidation can be defined in multiple ways
1- Loss of electron
2- Increase in oxidation number
3- Loss of hydrogen
4- Gain of oxygen atoms
The last definition is the earlier one in organic chemistry.
For consultation in chemistry. whtsapp +923554232104
Calculate the number of particles in:
0.150 mol NaCl
Answer:
[tex]N=9.033\times 10^{22}\ \text{units}[/tex]
Explanation:
It is given that,
Number of moles, n = 0.15
We need to find the number of particles in 0.15 mol of NaCl. Let N are the number of particles i.e.
Number of particles = number of moles × Avagadro's number
[tex]N=n\times N_A[/tex]
So,
[tex]N=0.15\times 6.022\times 10^{23}\\\\N=9.033\times 10^{22}\ \text{units}[/tex]
So, the number of particles are [tex]9.033\times 10^{22}\ \text{units}[/tex].
n-Butane (C4H10) is burned with stoichiometric amount of oxygen. Determine the mole fraction of carbon dioxide and water in the products. Also, calculate the mole number of carbon dioxide in the products per unit mole of fuel burned.
Answer:
See details below
Explanation:
The balanced reaction equation is given below:
[tex]2C_{4} H_{10}[/tex] + [tex]13O_{2}[/tex] → [tex]8CO_{2}[/tex] + [tex]10H_{2} O[/tex]
Mole fraction of CO2 to H20
= 8/10 = [tex]\frac{4}{5}[/tex]
Mole ratio of C4H10 to CO2 is 2:8 = 1:4
1 mole of n-butane - 38.12 g
4 moles - ?
= 152.48g fuel consumed.
The specific heat of a certain type of metal is 0.128 J/(g⋅∘C). What is the final temperature if 305 J of heat is added to 52.4 g of this metal, initially at 20.0 ∘C?
Answer:
65.47∘C
Explanation:
Specific heat capacity, c = 0.128 J/(g⋅∘C)
Initial temperature = 20.0 ∘C
Final temperature = ?
Mass = 52.4 g
Heat = 305 J
All these variables are related by the following equation;
H = m c ΔT
ΔT = H / mc
ΔT = 305 / (52.4 * 0.128)
ΔT = 45.47∘C
ΔT = Final Temperature - Initial Temperature
Final temperature = ΔT + Initial temperature
Final temperature = 45.47∘C + 20.0 ∘C = 65.47∘C
Arrange the following kinds of electromagnetic radiation in order of increasing wavelength: infrared, green light, red light, radio waves, X rays, ultraviolet light.
Rank from shortest to longest. To rank items as equivalent, overlap them.
infrared
green light
red light
radio waves
X rays
ultraviolet
Answer:
In the other of increasing wavelength we arrange as
X-rays
ultraviolet
green light
red light
infrared
radio waves
Explanation:
In the electromagnetic spectrum, wavelength decreases with increase in the energy of the electromagnetic wave. Since the e-m wave spectrum is arranged in the order of increasing energy (decreasing wavelength) as: Radio wave; infrared; visible light; ultraviolet; x-rays; gamma rays. Within the visible light, the green light has more energy than the red light. Therefore, the arrangement should be in the reverse direction of their increasing energy.
You are given a sample of metal and asked to determine its specific heat. You weigh the sample and find that its weight is 30.0 N. You carefully add 1.25×10^4 J of heat energy to the sample and find that its temperature rises 15.0 °C. What is the sample's specific heat?
Answer:
272.33 J/Kg°C
Explanation:
Data obtained from the question include the following:
Weight of metal = 30 N
Heat used (Q) = 1.25×10⁴ J
Change in temperature (ΔT) = 15.0 °C.
Specific heat capacity (C) =..?
Next, we shall determine the mass of the metal.
The mass of the metal can be obtained as follow:
Weight (W) = mass (m) x acceleration due to gravity (g)
W = mg
Weight of metal = 30 N
Acceleration due to gravity = 9.8 m/s²
Mass (m) =..?
W = mg
30 = m x 9.8
Divide both side by 9.8
m = 30/9.8
m = 3.06 Kg
Finally, we shall determine the specific heat capacity of the metal as show below:
Heat used (Q) = 1.25×10⁴ J
Change in temperature (ΔT) = 15.0 °C.
Mass (m) = 3.06 Kg
Specific heat capacity (C) =..?
Q = mCΔT
1.25×10⁴ = 3.06 x C x 15
Divide both side by 3.06 x 15
C = (1.25×10⁴) / (3.06 x 15)
C = 272.33 J/Kg°C
Therefore, the specific heat capacity of metal is 272.33 J/Kg°C.
Assuming an efficiency of 34.90%, calculate the actual yield of magnesium nitrate formed from 139.6 g of magnesium and excess copper(II) nitrate.Mg+Cu(NO3)2⟶Mg(NO3)2+Cu
Answer:
300.44 g
Explanation:
The balanced equation for the reaction is given below:
Mg + Cu(NO3)2 —> Mg(NO3)2 + Cu
Next, we shall determine the mass of Mg that reacted and the mass of Mg(NO3)2 produced from the balanced equation.
This is illustrated below:
Molar mass of Mg = 24 g/mol
Mass of Mg from the balanced equation = 1 x 24 = 24 g
Molar mass of Mg(NO3)2 = 24 + 2[14 + (16x3)]
= 24 + 2[ 14 + 48]
= 24 + 124 = 148 g/mol
Mass of Mg(NO3)2 from the balanced equation =
1 x 148 = 148 g
From the balanced equation above,
24 g of Mg reacted to produce 148 g of Mg(NO3)2.
Next, we shall determine the theoretical yield of Mg(NO3)2.
This can be obtained as follow:
From the balanced equation above,
24 g of Mg reacted to produce 148 g of Mg(NO3)2.
Therefore, 139.6 g of Mg will react to = (139.6 x 148)/24 = 860.87 g of Mg(NO3)2
Therefore, the theoretical yield of Mg(NO3)2 is 860.87 g
Finally, we shall determine the actual yield of Mg(NO3)2 as follow:
Theoretical of Mg(NO3)2 = 860.87 g
Percentage yield = 34.90%
Actual yield of Mg(NO3)2 =?
Percentage yield = Actual yield /Theoretical yield x 100
34.90% = Actual yield /860.87
Cross multiply
Actual yield = 34.90% x 860.87
Actual yield = 34.9/100 x 860.87
Actual yield = 300.44 g
Therefore, the actual yield of Mg(NO3)2 is 300.44 g
Current is described as
A. moles of electrons.
B. the flow of electrons through a substance.
C. electricity.
D. the flow of ions through a substance.
Answer:
B!
Explanation:
I got it right in class!
19. Hexavalent chromium bonds with fluorine to form an ionic compound. What's the chemical formula and name for this compound
using the Stock system?
A. Cr2F6, chromous hexafluoride
B. CrF6, chromic fluoride
C. CrF6, chromium(VI) hexafluoride
D. CrF6, chromium(VI) hexafluoride
Answer:
C. CrF6, chromium(VI) hexafluoride.
Explanation:
Hello,
In this case, since we are given a hexavalent chromium we must notice it has +6 as its oxidation state. Moreover, fluorine, when forming ionic compounds works with -1, for which the chemical formula is:
[tex]Cr^{6+}F^-\\\\CrF_6[/tex]
And the stock name is indeed C. CrF6, chromium(VI) hexafluoride (looks like D. is the same) since we have six fluoride ions in the formula and we point out chrmium's oxidation state.
Regards.
Answer:
C. CrF6, chromium(VI) hexafluoride.
Explanation:
Given a fixed amount of gas in a rigid container (no change in volume), what pressure will the gas exert if the pressure is initially 1.50 atm at 22.0oC, and the temperature is changed to 11.0oC?
A. 301 atm
B. 1.56 atm
C. 0.750 atm
D. 1.44 atm
E. 3.00 atm
Answer:
The pressure the gas will have if the pressure is initially 1.50 atm at 22.0 ° C and the temperature changes at 11.0 ° C is 1.44 atm (option D)
Explanation:
Gay Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move more rapidly. Then the number of collisions against the walls increases, that is, the pressure increases. That is, the gas pressure is directly proportional to its temperature.
Gay-Lussac's law can be expressed mathematically as follows:
[tex]\frac{P}{T}=k[/tex]
Where P = pressure, T = temperature, K = Constant
You have a gas that is at a pressure P1 and at a temperature T1. When the temperature varies to a new T2 value, then the pressure will change to P2, and then:
[tex]\frac{P1}{T1}=\frac{P2}{T2}[/tex]
In this case:
P1= 1.50 atmT1= 22 °C= 295 °K (being 0°C= 273 °K)P2= ?T2= 11 °C= 284 KReplacing:
[tex]\frac{1.5 atm}{295 K}=\frac{P2}{284 K}[/tex]
Solving:
[tex]P2= 284 K*\frac{1.5 atm}{295 K}[/tex]
P2=1.44 atm
The pressure the gas will have if the pressure is initially 1.50 atm at 22.0 ° C and the temperature changes at 11.0 ° C is 1.44 atm (option D)
What is the pressure, in Pa, if the height of a column of mercury is 400. mm and the density of mercury is 13.6 gcm3
Answer:
Explanation:
Pressure due to a liquid column
P = hdg where h is height of column , d is density of liquid and g acceleration due to gravity .
( 13.6 g cm⁻³ = 13.6 x 10³ kg m⁻³ , because 1 m³ = 10⁶ cm³ )
Putting the given values in the equation
P = 400 x 10⁻³ x 13.6 x 10³ x 9.8 Pa
= 53312 Pa
interpret the electron configuration
Answer:
Ca for calcium
20 electrons
2-2s electron
The gas in a 250. mL piston experiences a change in pressure from 1.00 atm to 2.55 atm. What is the new volume (in mL) assuming the moles of gas and temperature are held constant?
Answer:
[tex]\large \boxed{\text{0.980 L}}[/tex]
Explanation:
The temperature and amount of gas are constant, so we can use Boyle’s Law.
[tex]p_{1}V_{1} = p_{2}V_{2}[/tex]
Data:
[tex]\begin{array}{rcrrcl}p_{1}& =& \text{1.00 atm}\qquad & V_{1} &= & \text{250. mL} \\p_{2}& =& \text{2.55 atm}\qquad & V_{2} &= & ?\\\end{array}[/tex]
Calculations:
[tex]\begin{array}{rcl}\text{1.00 atm} \times \text{250. mL} & =& \text{2.55 atm} \times V_{2}\\\text{250. mL} & = & 2.55V_{2}\\V_{2} & = &\dfrac{\text{250. mL}}{2.55}\\\\& = &\textbf{98.0 mL}\\\end{array}\\\text{The balloon's new volume is $ \large \boxed{\textbf{0.980 L}}$}[/tex]
A compound X has a molecular ion peak in its mass spectrum at m/z 136. What information does this tell us about X
Explanation:
The mass to charge ratio =136
What is the term used by particular kind of matter Called??
Answer:
[tex]\boxed{\mathrm{substance}}[/tex]
Explanation:
The term used by particular kind of matter is called substance.
A substance is a particular kind of matter because it has physical properties.
A student mixes 2.83 mL of benzoyl chloride with excess 15 M NH4OH to produce 1.95 g of benzamide. What is the percent yield of this student's experiment
Answer:
Explanation:
The reaction of benzoyl chloride with NH₄OH to produce benzamide is:
Benzoyl chloride + ammonia → Benzamide + NH₄Cl
Molar mass of benzoyl chloride: 140.57 g/mol. Density 1.21g/mL
Molar mass benzamide: 121.14g/mol.
To know percent yield you must know the theoretical yield of the reaction (How many grams are produced assuming a yield of 100%). Percent yield will be (Actual yield / Theoretical Yield) ₓ 100
Moles of 2.83mL of benzoyl chloride are:
2.83mL ₓ (1.21g/mL) ₓ (1mol / 140.57g) = 0.02436 moles of benzoyl chloride.
As 1 mole of benzoyl chloride produce 1 mole of benzamide (Theoretical yield), theoretical moles of benzamide produced are 0.02436. In mass:
0.02436 moles ₓ (121.14g / mol) = 2.95g of benzoyl chloride
As there are produced just 1.95, percent yield is:
(1.95g / 2.95g) ₓ 100 = 66.1%
What is the freezing point of a solution prepared from 45.0 g ethylene glycol (C2H6O2) and 85.0 g H2O? Kf of water is 1.86°C/m.
Answer:
[tex]T_{sol}=-15.9\°C[/tex]
Explanation:
Hello,
In this case, we can analyze the colligative property of solutions - freezing point depression - for the formed solution when ethylene glycol mixes with water. Thus, since water freezes at 0 °C, we can compute the freezing point of the solution as shown below:
[tex]T_{sol}=T_{water}-i*m*Kf[/tex]
Whereas the van't Hoff factor for this solute is 1 as it is nonionizing and the molality is:
[tex]m=\frac{mol_{solute}}{kg\ of\ water}=\frac{45.0g*\frac{1mol}{62g} }{85.0g*\frac{1kg}{1000g} } =8.54m[/tex]
Thus, we obtain:
[tex]T_{sol}=0\°C+(-8.54m*1.86\frac{\°C}{m} )\\\\T_{sol}=-15.9\°C[/tex]
Best regards.
The freezing point of a solution prepared from 45.0 g ethylene glycol and 85.0 g of water is -15.9 °C.
What is freezing point depression?Freezing point depression is a drop in the temperature at which a substance freezes, caused when a smaller amount of another, non-volatile substance is added.
Step 1: Calculate the molality of the solution.We will use the definition of molality.
b = mass of solute / molar mass of solute × kg of solvent
b = 45.0 g / 62.07 g/mol × 0.0850 kg = 8.53 m
Step 2: Calculate the freezing point depression (ΔT).We will use the following expression, where Kf is the cryoscopic constant of water.
ΔT = Kf × b = 1.86 °C/m × 8.53 m = 15.9 °C
Step 3: Calculate the freezing point of the solution.The freezing point of pure water is 0°C.
T = 0°C - 15.9 °C = -15.9 °C
The freezing point of a solution prepared from 45.0 g ethylene glycol and 85.0 g of water is -15.9 °C.
Learn more about freezing point depression here: https://brainly.com/question/14115775
If enough experimental data supports a hypothesis, then it
Answer:
Then the hypothesis is proved and becomes a theory.
If not, then another hypothesis should be proposed and tested.
Based on their molecular structure, identify the stronger acid from each pair of oxyacids. Match the words in the left column to the appropriate blanks in the sentences on the right.
1) HI is a stronger acid than H2Te because iodine____than tellurium.
2) H2Te is a stronger acid than H2S because the H-Te bond is_____.
3) NaH is not acidic because hydrogen____than sodium.
a. has a more negative electron afflity
b. is more electronegative
c. has a larger atomic radius
d. stronger
e. is harder to ionize
Answer:
1)is more electronegative
2)
3) is more electronegative
Explanation:
1) for the first question, iodine is more electronegative than tellurium hence we naturally expect that HI should be more acidic than H2Te since electronegativities play a role in the acidity of chemical species.
2) the correct option is not listed because the H2Te bond is weaker than the H2S bond. This makes it easier for H2Te to dissociate releasing H^+ , thereby being more acidic than H2S.
3) Hydrogen is more electronegative than sodium hence it cannot be ionized thus NaH is not acidic.
What states can electrons exist in? A. Electron clouds or energy levels B. Positive and negative C. Up and down spin D. In phase and out of phase
Answer:
A. Electron clouds or energy levels
Explanation:
Electrons can exist in two states:
Stablized in electronic orbitalsFreely movingElectrons can exist in an electron cloud or energy level. Electron in an atoms have ability to change energy levels either by emitting or absorbing a photon that form the energy equal to the energy difference between the two levels.
Hence, the correct answer is A.
Answer:
Up and DOWN spin
Explanation:
what is chemical equation of Braium chloride?
Answer:
BaCl2
Explanation:
Barium = Ba
Chloride => Cl-
Chemical Equation:
Ba + Cl => BaCl2
Note:
The valency of barium is 2 and valency of chloride is 1 (i.e. chlorine). The formula formed by the combination of these elements is BaCl2 (there's exchange of valencies when these two elements combine).
Fill in the blanks
1. the ____ atoms of the ____ groups and the hydrogen atoms attached to the ____ atoms form ____.
(answer choices; nitrogen, carbon, a-helices or b-pleated sheets, carbonyl, globular of firbrous structures, oxygen, amino, random coil, thiol)
2. In the a helix, hydrogen bonds form between the ____ oxygen atom and the ____ hydrogen atom of a peptide bond in _____. In the B-pleasted sheet, hydrogen bonds form between the ____ oxygen atom and the ____ hydrogen atom of a peptide bond in ____.
(answer choices; parallell sections of a long polypeptide chain, the next amino acid unit, carboxyl, the next turn of the helical chain, thiol, amino, carbonyl)
Answer:
1. oxygen; carbonyl; nitrogen; α-helices or β-pleated sheets
2. carbonyl; amino; the next turn of the helical chain; carbonyl; amino; parallel sections of a long polypeptide chain.
Explanation:
The secondary structure of proteins is of two major conformations, the α helix and β conformations which are very stable.
1. The oxygen atoms of the carbonyl groups and the hydrogen atoms attached to the nitrogen atoms form α-helices or β-pleated sheets.
2. In the α-helix, hydrogen bonds form between the carbonyl oxygen atom and the amino hydrogen atom of a peptide bond in the next turn of the helical chain. In the β-pleated sheet, hydrogen bonds form between the carbonyl oxygen atom and the amino hydrogen atom of a peptide bond in parallel sections of a long polypeptide chain.
9. Ibuprofen contain which of the following two functional groups: (1 point)
A) benzene
B) halogen
C) carboxyl
D) hydroxyl
Answer:
A and C
I hope this helps you:)