our environment is very sensitive to the amount of ozone in the upper atmosphere. the level of ozone normally found is 5.5 parts/million (ppm). a researcher believes that the current ozone level is not at a normal level. the mean of 13 samples is 6.0 ppm with a standard deviation of 0.9 . assume the population is normally distributed. does the data support the researcher's claim at the 0.05 level? make the decision to reject or fail to reject the null hypothesis.

Answer:

57.5 cm × 8 mi./cm = 460 miles

The probability that the exam scores are at least 37 is 0.4013 or 40.13%

The probability that the exam scores are at least 37 can be calculated using the normal distribution function. To calculate the probability, we first need to standardize the variable using the formula z = (x - μ) / σ, where x is the value of interest (in this case, x = 37), μ is the mean, and σ is the standard deviation.

z = (37 - 36.12) / 3.53 = 0.25

Using a standard normal distribution table or a calculator, we can find the probability that a standard normal random variable is greater than or equal to 0.25, which is approximately 0.4013.

Therefore, the probability that the exam scores are at least 37 is 0.4013 or 40.13%

To learn more about probability here;

brainly.com/question/30034780#

#SPJ11

Answer: The answer is 7

Step-by-step explanation:

Based on the calculated z-score of 17.07, and a corresponding p-value, the process would be considered out of control at the 0.05 significance level.

To determine whether the process is in control or out of control, we can use a hypothesis test with a significance level of 0.05. The null hypothesis (H0) is that the process is in control, and the alternative hypothesis (Ha) is that the process is out of control.

We can calculate the z-score as follows:

z = (x - μ) / (σ / sqrt(n))

where x is the observed value (118), μ is the mean (104), σ is the standard deviation (8.2), and n is the sample size (1).

Plugging in the values, we get:

z = (118 - 104) / (8.2 / sqrt(1)) = 17.07

The corresponding p-value for this z-score is virtually zero. Since the p-value is less than 0.05, we reject the null hypothesis and conclude that the process is out of control.

To know more about hypothesis test:

https://brainly.com/question/30588452

#SPJ4

The parts of the circle when named are listed below

An inscribed angle is an angle between two chords

So, we have

inscribed angle = Angle GJI

A major arc is an arc with the greater central angle

So, we have

Major arc = AJG

Minor arc = GFH

Next, we have

GH = 55 degrees i.e angle at center = arc

GJI = 180 degrees i.e. semicircle

Read more about angles at

https://brainly.com/question/28293784

#SPJ1

Part A: The side length of triangle EF = 10.35.

Part B: ∠E = 78

Sine rule :

e/sinE = f/sinF = d/sinD

Where D, E, and F are the angles and d,e and f are the angles' opposing sides.

Put the values:

DF/sinE = 11.7/sin55 = EF/sin47

Part A: EF = ?

11.7/sin55 = EF/sin47

EF = 11.7 * sin47 / sin55

EF = 10.35

Part B: ∠E = ?

Using angle sum property of triangles.

∠E + ∠D + ∠F = 180

∠E + 47 + 55 = 180

∠E = 78

Know more about the sine rule

https://brainly.com/question/27174058

#SPJ1

Answer: First, we can simplify 1/6 and 3/6 by finding a common denominator of 12:

1/6 = 2/12

3/6 = 6/12

Now we have:

2/12 + 6/12 + 1/12

Combining the numerators, we get:

9/12

Simplifying this fraction by dividing the numerator and denominator by their greatest common factor of 3, we get:

3/4

Therefore, the answer is C. 9/12.

Step-by-step explanation:

Find the frontal area = triangle PLUS square...then multiply by depth ,a.

  1/2 * a * b     +    a * a       all of this times the depth  'a'

 [ 1/2 ( 7 *5)  +  7*7 ]  *  7   = 465.5 units^3

Answer:

3 is greater than or equal to value a.

Step-by-step explanation:

There are  212520  ways by which guests arrange themselves on a four person coach.

The term permutation refers to a mathematical calculation of the number of ways a particular set can be arranged. Put simply, a permutation is a word that describes the number of ways things can be ordered or arranged. With permutations, the order of the arrangement matters.

there are total 23 guests and they arranged themselves in 4 person coach,

so,

n = 23 and r = 4

npr = n!/(n-r)!

= 23!/(23-4)!

= 23!/19!

= 23x 22 x 21 x 20x 19!/19!

now cancel the factorial 19 from numerator as well as denominator

=  23x 22 x 21 x 20

= 212520

Learn more about permutation here :-

https://brainly.com/question/30649574

#SPJ4

Therefore, the approximate dimensions of the rectangle to the nearest tenth of a meter are width = 7.9 m and length = 10.8 m.

Area is a measure of the size of a two-dimensional surface or shape. It is typically expressed in square units, such as square meters (m²), square centimeters (cm²), square feet (ft²), or square inches (in²).

Here,

Let's denote the width of the rectangle as "w" in meters. Then, according to the problem statement, the length of the rectangle can be expressed in terms of the width as:

length = 2w - 5

The area of the rectangle is given as 97 square meters, so we can write:

area = length × width

Substituting the expression for length in terms of the width, we get:

area = (2w - 5) × w

Expanding this expression, we get a quadratic equation in standard form:

2w² - 5w - 97 = 0

We can solve this equation using the quadratic formula:

w = (-(-5) ± √((-5)² - 4×2×(-97))) / (2×2)

Simplifying this expression, we get:

w ≈ 7.9 or w ≈ -6.2

Since the width of a rectangle cannot be negative, we discard the negative solution and approximate the width to the nearest tenth of a meter:

w ≈ 7.9 m

Using the expression for the length in terms of the width, we can find the length:

length = 2w - 5

≈ 10.8 m

To know more about area,

https://brainly.com/question/13194650

#SPJ1

The line that is parallel to AC and passes through B has the equation y: 1/5x + 12/5.

The formula for a straight line is y=mx+c where c is the height at which the line intersects the y-axis, also known as the y-intercept, and m is the gradient.

The benefit of expressing a linear equation in this way is that the values for m and b correspond to the slope and y-intercept, respectively.

This makes it easy to graph the line that the equation describes.

So, the slope of AC is:

6-1/1/2= 5/-1 = -5

The equation of line D, which passes through B and is perpendicular to AC, is given as y: mx + p.

Where p is the y value of the y-intercept point and m is the slope.

The fact that line D is perpendicular to line AC indicates that their slopes add up to one.

Therefore,

(−5) × m = −1

Now,

m = -1/-5 = 1/5

We discover that the D equation is:

Y: 1/5x + p

To complete the equation of D at this time, we still require the value of p.

B(3, 3)∈ D

3 = 1/5(3) + p

p = 3 - 3/5 = 12/5 = 2.4

Hence, equation D will be:

y: 1/5x + 12/5

Therefore, the line that is parallel to AC and passes through B has the equation y: 1/5x + 12/5.

Know more about the equation of the line here:

https://brainly.com/question/18831322

#SPJ1

Correct question:

Finding the area of a triangle is straightforward if you know the length of the base and the height of the triangle. But is it possible to find the area of a triangle if you know only the coordinates of its vertices? In this task, you’ll find out. Consider ΔABC, whose vertices are A(2, 1), B(3, 3), and C(1, 6); let line segment AC represent the base of the triangle.

Part A

Find the equation of the line passing through B and perpendicular to AC .

The ratio for tanx is 7/24.

To find the ratio for tanx, we need to use the given values of sinx and cosx.

The formula for tanx is:
tanx = sinx / cosx
Given, sinx = 7/25 and cosx = 24/25.
Now, let's substitute these values in the formula:
tanx = (7/25) / (24/25)
To divide these fractions, multiply the first fraction by the reciprocal of the second fraction:
tanx = (7/25) * (25/24)
Now, simplify the fractions:
tanx = (7 * 25) / (25 * 24)
The 25 in the numerator and denominator will cancel out:
tanx = 7 / 24.

For similar question on ratio.

https://brainly.com/question/29053563

#SPJ11

The soil will reach about 27 cm up the pot when it fills 75% of the pot's volume.

To determine how far up the pot the soil will reach, we need to first find the volume of the pot, then find 75% of that volume, and finally calculate the height of soil in the pot.
Step 1: Calculate the volume of the pot
The volume of a pyramid can be calculated using the formula V = (1/3) * B * h,

where V is the volume, B is the area of the base, and h is the height.

Since the base is a square with a side length of 36 cm, the area of the base (B) is 36 cm * 36 cm = 1296 cm².

Now, plug the values into the formula:
V = (1/3) * 1296 cm² * 36 cm = 15552 cm³
Step 2: Calculate 75% of the pot's volume
75% of the pot's volume can be calculated as:
Soil volume = 15552 cm³ * 0.75 = 11664 cm³
Step 3: Calculate the height of the soil in the pot
To find the height of the soil, we can use the same formula for the volume of the pyramid, but we will solve for the height[tex](h_soil)[/tex] this time:
11664 cm³ = (1/3) * 1296 cm² * [tex]h_soil[/tex]
Solve for h_soil:
[tex]h_soil[/tex] = (11664 cm³ * 3) / 1296 cm² ≈ 27 cm.

For similar question on reach.

https://brainly.com/question/23413680

#SPJ11

Answer: the corect answer is B

Step-by-step explanation: Please give me brainly

In the given Sample Space, there are 80 red gumballs in the entire population of 200 gumballs.

What exactly is a sample space?

In probability theory, a sample space is the set of all possible outcomes or results of an experiment or random process. It is denoted by the symbol "S". The sample space depends on the nature of the experiment or process and consists of all the possible values or events that could occur.

Now,

If the random sample of 25 gumballs contains 10 red gumballs, we can estimate the proportion of red gumballs in the entire population of 200 gumballs by using the formula:

proportion of red gumballs = number of red gumballs in sample / sample size

Substituting the given values, we get:

proportion of red gumballs = 10 / 25

= 0.4

This means that the proportion of red gumballs in the entire population of 200 gumballs is estimated to be 0.4. To find the estimated number of red gumballs in the entire population, we can use the formula:

number of red gumballs in population = proportion of red gumballs x population size

Substituting the given values, we get:

number of red gumballs in population = 0.4 x 200

= 80

Therefore, based on the random sample results, it is estimated that there are 80 red gumballs in the entire population of 200 gumballs.

To know more about sample space visit the link

brainly.com/question/30206035

#SPJ1

Answer: Let's start by finding the dimensions of the original rectangular room.

We know that the area of the room is 60m², so we can write:

length x width = 60

We want to find the length and width of the original room, so let's call them "L" and "W", respectively. Then we can write:

L x W = 60

Now let's consider the modified room, where the length is 25% less and the width is 4m more. If the room is a square, that means the length and width are equal. Let's call this side length "S". Then we can write:

S x S = (L - 0.25L) x (W + 4)

Simplifying, we get:

S² = 0.75LW + 4(L - 0.25L)

Simplifying further, we get:

S² = 0.75LW + 3L

Now we can use the fact that LW = 60 to eliminate one variable. Substituting, we get:

S² = 45 + 3L

We want to find the length of the longest stick that can be put on the floor of the original room. This is the diagonal of the rectangle, which we can find using the Pythagorean theorem:

diagonal² = L² + W²

Substituting LW = 60, we get:

diagonal² = L² + (60/L)²

To maximize the diagonal, we can take the derivative of the right-hand side with respect to L and set it equal to zero:

d/dL (L² + (60/L)²) = 2L - 7200/L³ = 0

Solving for L, we get:

L³ = 3600

L = 15

Therefore, the length of the longest stick that can be put on the floor of the room is the diagonal, which is:

diagonal = sqrt(15² + (60/15)²) = sqrt(225 + 16) = sqrt(241) ≈ 15.52 meters

Step-by-step explanation:

Answer:

A

Step-by-step explanation:

Cost for x shirts in a week (4x+150)  divided by the shirts made in a week (x)

 would be represented by  A

Answer:

A is correct.

Step-by-step explanation:

The expression 4x + 150 represents the cost of manufacturing x shirts in a week. If x shirts are made in a week, the expression [tex]\frac{4x+150}{x}[/tex] (Answer A) represents the manufacturing cost per t-shirt (that's why we divide by x) where x shirts are made in a week (that's why we divide by just x, not 7x, because we're talking about 1 week, not 7 days)!

FIFA created a football with a 21 cm circumference out of leather. If 10% of the leather is wasted, the cost of leather with labour is Rs. 25 per square centimetre. All total, Rs. 31,173.90 worth of leather was purchased to produce one football.

The diameter of the leather used to make the football is 21 cm, so its radius is 10.5 cm (half of the diameter).

The formula for calculating a sphere's surface area can be used to determine how much leather is required to produce a football:

Surface area = [tex]4\pi r^2[/tex]

Surface area = 4π[tex](10.5)^2[/tex]

Surface area = 1385.44 sq. cm

If 10% of the leather is wasted, then the actual amount of leather used is 90% of the total leather bought. So, we need to calculate the cost of 90% of the leather:

Cost of leather = 90% of the total leather cost

Cost of leather = 0.9 x 1385.44 sq.cm x Rs. 25/sq.cm

Cost of leather = Rs. 31,173.90

Therefore, the total cost of the leather bought to make the football, including the labour cost, is Rs. 31,173.90.

To learn more about a sphere's surface area, refer:-

https://brainly.com/question/14692728

#SPJ1

With the given values, the surface area of the rectangular prism is 544 square units.

A prism is a three-dimensional geometric shape that consists of two identical parallel polygonal bases and a set of parallelograms connecting the corresponding sides of the two bases.

In general, the area of any prism can be found by adding together the areas of its bases and lateral faces.

To find the surface area of the rectangular prism represented by the given net, we need to calculate the area of each face and add them together. The rectangular prism has six faces, so we need to find the area of each face.

The top and bottom faces are rectangles with dimensions 8 x 6, so each has an area of 8 x 6 = 48 square units. There are two of these faces, so their combined area is 2 x 48 = 96 square units.

The front and back faces are rectangles with dimensions 8 x 16, so each has an area of 8 x 16 = 128 square units. There are two of these faces, so their combined area is 2 x 128 = 256 square units.

The left and right faces are rectangles with dimensions 16 x 6, so each has an area of 16 x 6 = 96 square units. There are two of these faces, so their combined area is 2 x 96 = 192 square units.

Therefore, the total surface area of the rectangular prism represented by the given net is:

96 (top and bottom) + 256 (front and back) + 192 (left and right) = 544 square units.

So, the surface area of the rectangular prism is 544 square units.

To know more about prism visit:

brainly.com/question/23963432

#SPJ1

a) A and B are independent events.

b) The outcome of each game is independent of the other games so, Rachel's loss = p.

c) The probability of all marbles being red is 4

a) Given that a first marble is red and the second marble is also red, such that

P(1) = P(2) = 0.2, P(3) = P(5) = P(6) = 0.1 and P(4) = 0.3 and die is thrown two times. Also given that:

A1 = red

B1 = red.

So, P(A) = [P(1, 1) + P(2, 2) + P(3, 3) + P(4, 4) + P(5, 5) + P(6, 6)]

= P(1).P(1) + P(2).P(2) + P(3).P(3) + P(4).P(4) + P(5).P(5) + P(6).P(6)

= 0.2 x 0.2 + 0.2 x 0.2 + 0.1 x 0.1 + 0.3 x 0.3 + 0.1 x 0.1 + 0.1 x 0.1

= 0.04 + 0.04 + 0.01 + 0.09 + 0.01 + 0.01 = 0.20

Now, B = [(4, 6), (6, 4), (5, 5), (5, 6), (6, 5), (6, 6)]

P(B) = [P(4).P(6) + P(6).P(4) + P(5).P(5) + P(5).P(6) + P(6).P(5) + P(6).P(6)]

= 0.3 x 0.1 + 0.1 x 0.3 + 0.1 x 0.1 + 0.1 x 0.1 + 0.1 x 0.1 + 0.1 x 0.1

= 0.03 + 0.03 + 0.01 + 0.01 + 0.01 + 0.01 = 0.10

A and B both events will be independent if

P(A ⋂ B) = P(A).P(B) …. (i)

And, here (A ⋂ B) = {(5, 5), (6, 6)}

So, P(A ⋂ B) = P(5, 5) + P(6, 6) = P(5).P(5) + P(6).P(6)

= 0.1 x 0.1 + 0.1 x 0.1 = 0.02

From equation (i) we get,

0.02 = 0.20 x 0.10

0.02 = 0.02

Therefore, we can say that A and B are independent events.

b) We know that the outcome of each game is independent of the other games. Rachel's loss = p. As per the given information, the games in the series are unrelated, indicating the application of the probability multiplication principle.

c) The probability of all marbles being red is 4

Let a be the probability that the first player (ultimately) wins if the two players are tied in wins. Let b be the probability that she wins if she is 1 ahead. And let c be the probability she wins if she is 1 behind. We have the equations

a = rb + 1 - r x c

b = r + 1 - r x a

c = r x a

To learn more about probability, click here:

brainly.com/question/30034780

#SPJ4

The decision to use a one-tailed or two-tailed test depends on the specific research question and the directionality of the hypothesis.

When testing a hypothesis about a population mean, researchers may use a one-tailed or two-tailed test. A one-tailed test is used when the research question only focuses on one direction of an effect, for example, if the researcher is interested in whether the population mean is greater than a specific value. In contrast, a two-tailed test is used when the research question is interested in any significant difference between the sample mean and the hypothesized population mean, regardless of the direction of the difference.

The decision to use a one-tailed or two-tailed test should be based on the specific research question, and it is essential to clearly define the directionality of the hypothesis before selecting the appropriate test.

Therefore, the choice of a one-tailed or two-tailed test should be based on the research question and the specific direction of the hypothesis.

To learn more about hypothesis here:

brainly.com/question/29519577#

#SPJ11

Answer: 48.5 sq units

Step-by-step explanation:

7*8=56, 56-7.5= 48.5

the coordinate that represents the cost when renting from either company would be the same is (10, 50). This means that if Carmen rents a bike for 10 hours, she would pay the same amount whether she rented from Company A or Company B.

How to determine the point?

To determine the point where the cost of renting a bike from Company A and Company B is the same, we need to find the values of h and y that satisfy the equations y = 2h + 30 and y = 4h + 10. We can solve for h by setting the two equations equal to each other:

2h + 30 = 4h + 10

Simplifying this equation, we get:

20 = 2h

h = 10

Now that we know h is 10, we can substitute that value into either equation to find y. Using the first equation:

y = 2h + 30 = 2(10) + 30 = 50

Therefore, the coordinate that represents the cost when renting from either company would be the same is (10, 50). This means that if Carmen rents a bike for 10 hours, she would pay the same amount whether she rented from Company A or Company B.

It's worth noting that as the number of hours rented increases, the difference in cost between the two companies becomes greater. For example, if Carmen rented a bike for 20 hours, the cost would be $70 from Company A and $90 from Company B. Therefore, it's important for Carmen to consider how long she plans to rent the bike for when deciding which company to rent from.

To know more about equations visit :-

https://brainly.com/question/22688504

#SPJ1

The surface area of a rectangular prism can be found using the formula:

A = 2lw + 2lh + 2wh

where l, w, and h are the length, width, and height of the prism, respectively.

Substituting the given values, we get:

A = 2(5 cm)(6 cm) + 2(5 cm)(7 cm) + 2(6 cm)(7 cm)

A = 60 cm² + 70 cm² + 84 cm²

A = 214 cm²

Therefore, the surface area of the rectangular prism is 214 cm².

Answer:

28cm

Step-by-step explanation:

see image for explanation.

There is a 75.40% chance that the sample mean X will be more than 0.5 away from the population mean μ.

Let X be the random variable representing the sample mean of a random sample of size 36 selected from a population with mean μ=44 and standard deviation σ=8.

The Central Limit Theorem (CLT) states that, under certain conditions, the distribution of the sample mean X can be approximated by a normal distribution with mean μ and standard deviation σ/√(n), where n is the sample size. Since the sample size is 36, we can use this approximation.

The probability that X is more than 0.5 away from the population mean can be calculated as follows:

P(|X-μ| > 0.5) = P((X-μ)/ (σ/√(n)) > (0.5) / (σ/√(n))) + P((X-μ)/ (σ/√(n)) < (-0.5) / (σ/√(n)))

Using the standard normal distribution table, we can find the corresponding probabilities for each term on the right-hand side of the equation. We have:

P(Z > 0.3125) + P(Z < -0.3125)

where Z is a standard normal random variable with mean 0 and standard deviation 1.

Using the standard normal distribution table, we can find that P(Z > 0.3125) = 0.3770 and P(Z < -0.3125) = 0.3770.

Therefore, the approximate probability that X will be more than 0.5 away from the population mean is:

P(|X-μ| > 0.5) = 0.3770 + 0.3770 = 0.7540

In terms of percentage, we can rewrite it as,

P(|X-μ| > 0.5) = 0.7540*100 = 75.40%

To learn more about probability click on,

https://brainly.com/question/15022620

#SPJ4

The calculated surface area of the figure is 3100.8 square feet

from the question, we have the following parameters that can be used in our computation:

SA = hp + 2B

From the figure, we have

B = 1/2 * (10 + 34) * 24.7 = 543.4

p = 2 * (34 + 19) = 106

h = 19

So, we have

SA = 19 * 106 + 2 *  543.4

Evaluate

SA = 3100.8

Hence, the surface area is 3100.8 square feet

Read more about surface area a

https://brainly.com/question/26403859

#SPJ1

The surface area of the composite figure is 446 cm².

Surface area is the sum of the areas of all faces (or surfaces) on a 3D object. It is a two-dimensional measure of the space occupied by the object, and is measured in units of square units, such as square inches, square feet, and square meters. Surface area is often used to determine the amount of material needed for a solid object or the amount of paint needed to cover it.

The surface area of the composite figure can be calculated using the formula SA = 2(L x W) + (2 x H x L) + (2 x H x W). In this case, L = 9 cm, W = 10 cm, and H = 7 cm.

Therefore, the surface area of the composite figure is SA = 2(9 cm x 10 cm) + (2 x 7 cm x 9 cm) + (2 x 7 cm x 10 cm) = 180 cm²+ 126 cm²+ 140 [tex]cm^2[/tex] = 446 cm².

Therefore, the surface area of the composite figure is 446 [tex]cm^{2}[/tex].

To know more about surface area click-

brainly.com/question/16519513

#SPJ1

Complete questions as follows-

Surface Area of Composite Figures Acellus Find the surface area of the composite figure. 1 9 cm 10 cm cm 7 cm 8 cm 2 cm SA [? ] cm? Enter Copyright 02003 2021 Acellus Corporation. All Rights Reserved:'