Answer:
v = 7.42 m / s
Explanation:
For this exercise we will use the conservation of mechanical energy.
Starting point. Before jumping from the tree
Em₀ = U = m g h
Final point . Part of the trajectory at 25º
Em_{f} = K + U = ½ m v2 + m g y
as they indicate that there is no air resistance, mechanical energy is conserved
Em₀ = Em_{f}
m g h = ½ m v² + m g y
v² = 2g (h - y)
Let's use trigonometry to find the height that has descended, how the angle is measured with respect to the vertical
cos 25 = y / L
y = L cos 25
we substitute
v² = 2 g (h - L cos 25)
for this case h = L = 30 m
v2 = 2g L (1- cos25)
let's calculate
v² = 2 9.8 30 (1 -cos 25)
v = √55.09
v = 7.42 m / s
giving brainlist down below pick one form of government that is easy to do
Direct Democracy, Representative Democracy, Dictatorship, Oligarchy, Communism, or Socialism
Answer:
Representative Democracy.
Explanation:
It is simple and easy because you choose a representative to make choices for the good of your people. It is much simpler then all the rest.
Your friend has decided to make some money during the next State Fair by inventing a game of skill. In the game as she has developed it so far, the customer shoots a rifle at a 5.0 cm diameter target falling straight down. Anyone who hits the target in the center wins a stuffed animal. Each shot would cost 50 cents. The rifle would be mounted on a pivot 1.0 meter above the ground so that it can point in any direction at any angle. When shooting, the customer stands 100 meters from where the target would hit the ground if the bullet misses. At the instant that the bullet is fired (with velocity of 1200 ft/sec according to the manual), the target is released from its holder 7.0 meters above the ground. (You see, the trigger is electronically connected to the release mechanism.) Your friend asks you to try out the game which she has set up on a farm outside of town. Before you fire the gun you calculate where you should aim. You may, as usual, neglect any effects of air resistance. Your conclusion? At what angle from the vertical should you aim?
Answer: from the vertical, one should aim 86.6°
Explanation:
height of the center of object = 7.0 m - 0.05 m = 6.95 m
now let the bullet hits centre at point A height x meters from the ground
also let t be the time taken for the bullet to hit the object
so distance travelled by the target will be
d = h - x = 6.95 - x
now using the equation of motion
d = 1/2gt²
so 1/2gt² = 6.95 - x
x = 6.95 - 1/2gt² .........let this be equ 1
let angle of fire be ∅
so v(cos∅) × t = 100
our velocity v is 1200 ft/sec = 365.76 m/s
365.76(cos∅) × t = 100 ........equ 2
also vertical position of the bullet after t is
y = y₀ + c(sin∅)t - 1/2gt²
y = 1 + 365.76(sin∅)t - 1/2gt² ----- equ 3
After time t. the vertical position x and y are same, else the bullet wouldn't have strike target at centre, so;
x = y
we substitute
equ 1 = equ 3
6.95 - 1/2gt² = 1 + 365.76(sin∅)t - 1/2gt²
6.95 - 1 = 365.76(sin∅)t - 1/2gt² + 1/2gt²
5.95 = 365.76(sin∅)t
t = 5.96 / 365.76(sin∅)
now input the above equ into equ 2
365.76(cos∅) × 5.96/365.76(sin∅) = 100
5.95(cos∅)/sin∅ = 100
tan∅ = 5.95/100 = 0.0595
∅ = 3.40°
therefore from the vertical, one should aim (90° - 3.40°) = 86.6°
ANSWER QUICK ! WILL GIVE BRAINLIEST
(EDGE2020 PHYSICS)
Substance X transfers thermal energy to substance Y through conduction. What is an accurate conclusion about the condition of both substances before conduction occurred?
Their molecules had the same amount of energy.
The substances were the same temperature.
Substance X’s molecules were faster than substance Y’s.
Substance X was cooler than substance Y.
Answer:
Substance X transfers thermal energy to substance Y through conduction. What is an accurate conclusion about the condition of both substances before conduction occurred? Substance X's molecules were faster than substance Y's.
Explanation:
An accurate conclusion about the condition of both substances before conduction occurred is substance X’s molecules were faster than substance Y’s.
What is thermal energy?
Thermal energy is the energy released in the form of heat. It manifests itself by releasing heat. It results from the atoms' movement or vibration, so it displays the system's internal energy. We define thermal energy as part of the internal energy of a system.
It is an extensive quantity, it depends on the size of the system, or on the amount of substance it contains. The SI unit of thermal energy is the joule (J). It is the energy contained within the system, excluding the kinetic energy of motion of the system as a whole and the potential energy of the system. Thermal energy is often classified into various types on the basis of how this internal energy, in the form of heat, is transferred from one body to another.
The correct answer is option C.
Learn more about thermal energy, refer:
https://brainly.com/question/9621699
#SPJ2
The initial speed of a cannon ball is 0.20 km/s. If the ball is to strike a target that is at a horizontal distance of 3.0 km from the cannon, what is the minimum time of flight for the ball
Answer:
15 seconds
Explanation:
Given that the initial speed of a cannon ball is 0.20 km/s. If the ball is to strike a target that is at a horizontal distance of 3.0 km from the cannon. The minimum time of flight for the ball can be calculated by using the formula for speed
speed = distance / time
Where
speed = 0.2 km/s
distance = 3 km
Substitute the two parameters into the formula
0.2 = 3 / t
make t the subject of the formula
t = 3/0.2
t = 15 s
Therefore, the minimum time of flight for the ball is 15 seconds
Two electrons, each with mass m and charge q, are released from positions very far from each other. With respect to a certain reference frame, electron A has initial nonzero speed v toward electron B in the positive x direction, and electron B has initial speed 3v toward electron A in the negative x direction. The electrons move directly toward each other along the x axis (very hard to do with real electrons). As the electrons approach each other, they slow due to their electric repulsion. This repulsion eventually pushes them away from each other.
A) Which of the following statements about the motion of the electrons in the given reference frame will be true at the instant the two speeds reach their separations?A) Electrons A is moving faster than electron B.B) Electron B is moving faster than electron A.C) Both electrons are moving at the same (nonzero) speed in the opposite direction.D) Both electrons are moving at the same (nonzero) speed in the same direction.E) Both electrons are momentarily stationary.
2) What is the minimum separation rmin that the electrons reach?
Complete Question
Two electrons, each with mass m and charge q, are released from positions very far from each other. With respect to a certain reference frame, electron A has initial nonzero speed v toward electron B in the positive x direction, and electron B has initial speed 3v toward electron A in the negative x direction. The electrons move directly toward each other along the x axis (very hard to do with real electrons). As the electrons approach each other, they slow due to their electric repulsion. This repulsion eventually pushes them away from each other.
A) Which of the following statements about the motion of the electrons in the given reference frame will be true at the instant the two speeds reach their separations?
A) Electrons A is moving faster than electron B.
B) Electron B is moving faster than electron A.
C) Both electrons are moving at the same (nonzero) speed in the opposite direction
.D) Both electrons are moving at the same (nonzero) speed in the same direction.
E) Both electrons are momentarily stationary.
2) What is the minimum separation[tex]r_{min}[/tex] that the electrons reach?
Answer:
1
The correct option is E
2
[tex]r_{min} = \frac{kq^2}{4 mv^2}[/tex]
Explanation:
From the question we are told that
The mass of each electron is m
The charge of each electron is q
The speed of electron A is v
The speed of electron B is 3v
Generally at their point of separation the repulsion force is equal to the force that is propelling the electrons due to this the electrons are momentarily stationary
Generally the total initial kinetic energy of both electron is mathematically represented as
[tex]K_{inT} = K_A + K_B[/tex]
=> [tex]K_{inT} = \frac{1}{2}m (v)^2 + \frac{1}{2} m (3v)^2[/tex]
=> [tex]K_{inT} = \frac{1}{2} (mv^2 + 9v^2m)[/tex]
=> [tex]K_{inT} = 5mv^2 [/tex]
Generally the total final kinetic energy of both electron is mathematically represented as
[tex]K_{fT} = \frac{1}{2} *m * v^2 + \frac{1}{2} *m * v^2[/tex]
Here v is the velocity due to the repulsion force
[tex]K_{fT} = mv^2 [/tex]
Generally the final potential energy of the both electrons is
[tex]P_f = \frac{ k * q^2}{r_{min}}[/tex]
Here k is the coulombs constant
So according to energy conservation law
[tex]K_{inT} = K_{fT} + P_f[/tex]
=> [tex]5mv^2 = mv^2 + \frac{ k * q^2}{r_{min}} [/tex]
=> [tex]r_{min} = \frac{kq^2}{4 mv^2}[/tex]
Tendon forces Ta and Tb are exerted on the patella. The femur exerts force F on the patella. If the magnitude of Tb is 80 N, what are the magnitudes of Ta and F, if no motion is occurring at the joint? (Answer: Ta = 44.8 N, F = 86.1 N)
Complete question
The diagram for this question is shown on the first uploaded image
Answer:
[tex]T_a = 44.8 \ N [/tex] , [tex] F = 86.03 \ N [/tex]
Explanation:
From the question we are told that
The magnitude of [tex]T_b = 80 N[/tex]
From the diagram we can see that
[tex]Ta * sin (38) + F * sin (29) = T_b * cos (30) \ \cdots (1)[/tex]
[tex]Ta * sin (38) + F * sin (29) = 80 * cos (30) \ \cdots (1)[/tex]
[tex]0.616 Ta + 0.485F = 69.3 \ \cdots (1)[/tex]
=> [tex]T_a = \frac{69.3 - 0.485F}{0.616}[/tex]
Also
[tex]T_a * cos(38) + T_b * sin (30)= F * cos (29) \ \cdots (2)[/tex]
=> [tex]T_a * cos(38) + 80* sin (30)= F * cos (29) \ \cdots (2)[/tex]
=> [tex]0.788 T_a + 40 = 0.875 F \ \cdots (2)[/tex]
=> [tex]0.788 [\frac{69.3 - 0.485F}{0.616}]+ 40 = 0.875 F[/tex]
=> [tex] 88.65 - 0.6204 F + 40 = 0.875 F[/tex]
=> [tex] 88.65 + 40 = 0.875 F+0.6204 F [/tex]
=> [tex] 128.65 = 1.4954 F [/tex]
=> [tex] F = 86.03 \ N [/tex]
substituting this obtained value for F in the above equation
[tex]T_a = \frac{69.3 - 0.485(86.03)}{0.616}[/tex]
[tex]T_a = 44.8 \ N [/tex]
Two speakers placed 0.94 m apart produce pure tones in sync with each other at a frequency of 1630 Hz. A microphone can be moved along a line parallel to the line joining the speakers and 9.4 m from it. An intensity maximum is measured a point P0 where the microphone is equidistant from the two speakers. As we move the microphone away from P0 to one side, we find intensity minima and maxima alternately. Take the speed of sound in air to be 344 m/s, and you can assume that the slits are close enough together that the equations that describe the interference pattern of light passing through two slits can be applied here.
Required:
a. What is the distance, in meters, between Po and the first intensity minimum?
b. What is the distance, in meters, between Po and the first intensity maximum?
c. What is the distance, in meters, between Po and the second intensity minimum?
d. What is the distance, in meters, between Po and the second intensity maximum?
Answer:
a. approximately [tex]1.1\; \rm m[/tex] (first minimum.)
b. approximately [tex]2.2\; \rm m[/tex] (first maximum.)
c. approximately [tex]3.4\; \rm m[/tex] (second minimum.)
d. approximately [tex]4.7\; \rm m[/tex] (second maximum.)
Explanation:
Let [tex]d[/tex] represent the separation between the two speakers (the two "slits" based on the assumptions.)
Let [tex]\theta[/tex] represent the angle between:
the line joining the microphone and the center of the two speakers, andthe line that goes through the center of the two speakers that is also normal to the line joining the two speakers.The distance between the microphone and point [tex]P_0[/tex] would thus be [tex]9.4\, \tan(\theta)[/tex] meters.
Based on the assumptions and the equation from Young's double-slit experiment:
[tex]\displaystyle \sin(\theta) = \frac{\text{path difference}}{d}[/tex].
Hence:
[tex]\displaystyle \theta = \arcsin \left(\frac{\text{path difference}}{d}\right)[/tex].
The "path difference" in these two equations refers to the difference between the distances between the microphone and each of the two speakers. Let [tex]\lambda[/tex] denote the wavelength of this wave.
[tex]\displaystyle \begin{array}{c|c} & \text{Path difference} \\ \cline{1-2}\text{First Minimum} & \lambda / 2 \\ \cline{1-2} \text{First Maximum} & \lambda \\\cline{1-2} \text{Second Minimum} & 3\,\lambda / 2 \\ \cline{1-2} \text{Second Maximum} & 2\, \lambda\end{array}[/tex].
Calculate the wavelength of this wave based on its frequency and its velocity:
[tex]\displaystyle \lambda = \frac{v}{f} \approx 0.211\; \rm m[/tex].
Calculate [tex]\theta[/tex] for each of these path differences:
[tex]\displaystyle \begin{array}{c|c|c} & \text{Path difference} & \text{approximate of $\theta$} \\ \cline{1-3}\text{First Minimum} & \lambda / 2 & 0.112 \\ \cline{1-3} \text{First Maximum} & \lambda & 0.226\\\cline{1-3} \text{Second Minimum} & 3\,\lambda / 2 & 0.343\\ \cline{1-3} \text{Second Maximum} & 2\, \lambda & 0.466\end{array}[/tex].
In each of these case, the distance between the microphone and [tex]P_0[/tex] would be [tex]9.4\, \tan(\theta)[/tex]. Therefore:
At the first minimum, the distance from [tex]P_0[/tex] is approximately [tex]1.1\; \rm m[/tex].At the first maximum, the distance from [tex]P_0[/tex] is approximately [tex]2.2\; \rm m[/tex].At the second minimum, the distance from [tex]P_0[/tex] is approximately [tex]3.4\; \rm m[/tex].At the second maximum, the distance from [tex]P_0[/tex] is approximately [tex]4.7\;\rm m[/tex].Interference is the result when two or more waves combine
The distance between P₀ and
a. The first intensity minimum is approximately 1.06 m
b. The first intensity maximum is approximately 2.165 m
c. The second intensity minimum is approximately 3.36 m
d. The second intensity minimum is approximately 4.72 m
The reasons the above values are correct are given as follows:
The known parameters are;
The distance between the two speakers = 0.94 m
Frequency of the tone produced by the two speakers = 1,630 Hz (in sync)
The line along which the microphone moves is parallel to the line between the two speakers
The distance between the parallel lines above = 9.4 m
The speed of sound in air, v₀ = 344 m/s
The interference pattern of light passing between two slits is to be applied
a. Based on the arrangement, we have;
P₀ = 9.4 × tan(θ)
Where;
θ = The angle formed formed by the line from the microphone to the midpoint of the distance between the two speakers and the perpendicular bisector to the line joining the two speakers
Based on Young's double-slit experiment, we have;
[tex]sin(\theta) = \dfrac{Path \ difference}{d}[/tex]
Where;
d = The distance between the two speakers representing the slits
The path difference for a minimum is n × λ/2
Where n = 1, 3, 5,...,(set of odd numbers)
The path difference for a maximum intensity sound is n·λ
Where n = 1, 2. 3, ..., n (n is an integer)
The wavelength, is given as follows;
[tex]\lambda = \dfrac{v}{f}[/tex]
Therefore;
[tex]\lambda = \dfrac{344}{1,630} = \dfrac{172}{815} \approx 0.211[/tex]
The wavelength, λ ≈ 0.211
Therefore, the angle, θ, for the first minima, θ, ≈arcsine(0.211/(2×0.94))
First minima, λ/2, P₀ =9.4 × tan(arcsine(0.211/(2×0.94))) ≈ 1.06
First maxima, λ, P₀ =9.4 × tan(arcsine(0.211/(94))) ≈ 2.165
Second minima, 3·λ/2, P₀ = 9.4 × tan(arcsine(3*0.211/(2×0.94))) ≈ 3.36
Second maxima, 2·λ, P₀ = 9.4 × tan(arcsine(2*0.211/(0.94))) ≈ 4.72
Therefore;
a. The distance between P₀ and the first intensity minimum is ≈ 1.06 m
b. The distance between P₀ and the first intensity maximum is ≈ 2.165 m
c. The distance between P₀ and the second intensity minimum is ≈ 3.36 m
d. The distance between P₀ and the second intensity minimum is ≈ 4.72 m
Learn more about interference of sound waves here:
https://brainly.com/question/14006922
https://brainly.com/question/12096166
An airplane with a speed of 92.3 m/s is climbing upward at an angle of 51.1 ° with respect to the horizontal. When the plane's altitude is 532 m, the pilot releases a package.
(a) Calculate the distance along the ground, measured from a point directly beneath the point of release, to where the package hits the earth.
(b) Relative to the ground, determine the angle of the velocity vector of the package just before impact. (a) Number Units (b) Number Units
Answer:
a
[tex]D = 1162.7 \ m [/tex]
b
[tex]\beta =- 65.55^o[/tex]
Explanation:
From the question we are told that
The speed of the airplane is [tex]u = 92.3 \ m/s[/tex]
The angle is [tex]\theta = 51.1^o[/tex]
The altitude of the plane is [tex]d = 532 \ m[/tex]
Generally the y-component of the airplanes velocity is
[tex]u_y = v * sin (\theta )[/tex]
=> [tex]u_y = 92.3 * sin ( 51.1 )[/tex]
=> [tex]u_y = 71.83 \ m/s[/tex]
Generally the displacement traveled by the package in the vertical direction is
[tex]d = (u_y)t + \frac{1}{2}(-g)t^2[/tex]
=> [tex] -532 = 71.83 t + \frac{1}{2}(-9.8)t^2[/tex]
Here the negative sign for the distance show that the direction is along the negative y-axis
=> [tex]4.9t^2 - 71.83t - 532 = 0[/tex]
Solving this using quadratic formula we obtain that
[tex]t = 20.06 \ s[/tex]
Generally the x-component of the velocity is
[tex]u_x = u * cos (\theta)[/tex]
=> [tex]u_x = 92.3 * cos (51.1)[/tex]
=> [tex]u_x = 57.96 \ m/s[/tex]
Generally the distance travel in the horizontal direction is
[tex]D = u_x * t[/tex]
=> [tex]D = 57.96 * 20.06 [/tex]
=> [tex]D = 1162.7 \ m [/tex]
Generally the angle of the velocity vector relative to the ground is mathematically represented as
[tex]\beta = tan ^{-1}[\frac{v_y}{v_x } ][/tex]
Here [tex]v_y[/tex] is the final velocity of the package along the vertical axis and this is mathematically represented as
[tex]v_y = u_y - gt[/tex]
=> [tex]v_y = 71.83 - 9.8 * 20.06[/tex]
=> [tex]v_y = -130.05 \ m/s [/tex]
and v_x is the final velocity of the package which is equivalent to the initial velocity [tex]u_x[/tex]
So
[tex]\beta = tan ^{-1}[-130.05}{57.96 } ][/tex]
[tex]\beta =- 65.55^o[/tex]
The negative direction show that it is moving towards the south east direction
PLEASE ANSWER QUICK (7th grade science measurment of volume)
Estimate the water volume in the graduated cylinder to the nearest 0.1 mL.
(Remember to read from the bottom of the curved meniscus.)
Answer : The volume of water in graduated cylinder is 15.5 mL.
Explanation :
As we know that for the measurement of the volume of liquid in graduated cylinder are shown by placing the graduated cylinder on the flat surface and then view the height of the liquid in the graduated cylinder with the naked eyes directly level with the liquid.
The liquid will tend to curve downward that means this curve is known as the meniscus.
In the case of colored liquid, we are always read the upper meniscus of the liquid for the measurement.
In the case of colorless liquid, we are always read the lower meniscus of the liquid for the measurement.
In the given image, there are 5 larger and 5 smaller division between the 15 and 20 and the solution is colored. The value of larger division is 1 mL and smaller division is 0.5 mL.
So, we will read the upper meniscus of the liquid for the measurement.
Hence, the volume of water in graduated cylinder is 15.5 mL.
A spaceship left earth to collect samples from mars? Which statement is true about the strength of the earths gravity on moving spacecrafts
Answer:
The first one
Explanation:
What is the average velocity of the object between t = 3 seconds and t = 4 seconds?
2
A
-1
Your answer:
-1 cm/s
-2 cm/s
O2 cm/s
o 1 cm/s
00 cm/s
O 0.5 cm/s
-0.5 cm/s
Answer:
it's uhh 0.05 my g yup that's the answer
Explanation:
5
Please help I would appreciate it
Answer:
3.176hours
Explanation:
270/85=3.126 hours DISTANCE / SPEED = TIME
Why does a solid keep its shape
Answer:
Solids can hold their shape because their molecules are tightly packed together. Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms.
Objects can be charged by the transfer of electrons.
True
False
Answer:
True
Explanation:
Whenever electrons are transferred between objects, neutral matter becomes charged. For example, when atoms lose or gain electrons they become charged particles called ions. Three ways electrons can be transferred are conduction, friction, and polarization. In each case, the total charge remains the same.
I tried, hope this helps :)
* I might be wrong though
Although we have discussed single-slit diffraction only for a slit, a similar result holds when light bends around a straight, thin object, such as a strand of hair. In that case, a is the width of the strand. From actual laboratory measurements on a human hair, it was found that when a beam of light of wavelength 633.0nm was shone on a single strand of hair, and the diffracted light was viewed on a screen 1.40m away, the first dark fringes on either side of the central bright spot were 5.34cm apart. How thick was this strand of hair?
Answer:
a = 16.5 x 10⁻⁶ m = 16.5 μm
Explanation:
Here we will use the diffraction equation:
y = mλL/a
where,
y = distance between two consecutive dark fringes = 5.34 cm = 0.0534 m
m = order of diffraction = 1
λ = wavelength of light = 633 nm = 6.33 x 10⁻⁷ m
L = Distance between hair and screen = 1.4 m
a = thickness of hair = ?
0.0534 m = (1)(6.33 x 10⁻⁷ m)(1.4 m)/(a)
a = (6.33 x 10⁻⁷ m)(1.4 m)/(0.0534 m)
a = 16.5 x 10⁻⁶ m = 16.5 μm
Many biological systems are well-described by the laws of statistical physics. A simple yet often powerful approach is to think of a system as having only two states. For example, an ion channel may be open or closed. In this problem, consider a simple model of membrane channels for ions: The system is described by a Boltzmann distribution with only two states, with energies ε1 (open) and ε2 (closed). Assume the "open" state is the state of higher energy, so that ε1 > ε2.
If the probability of finding an ion channel open is popen and the probability of finding the ion channel closed is pclosed, which of the expressions below best represents the relative probability of open to closed, R = popen/pclosed? Use the notation z1 = e-ε1/kBT and z2 = e-ε2/kBT
a. z1-z2
b. z2-z1
c. z1/z2
d. z2/z1
e. Something else
Answer:
z1/z2
Explanation:
we have no quantum effects therefore we can make use of Maxwell Boltzmann distribution in the description of this system.
using the boltzman distribution the probability of finding a particle in energy state
[tex]P_{ei} = \frac{gie^{-ei/kol} }{z}[/tex]
we have
gi to be degeneration of the ith state
ei to be energy of ith state
[tex]z=e^{-ei/kbt}[/tex] summation
[tex]P_{ope} = \frac{e^{-ei/kBt} }{z} = \frac{Z_{1} }{Z}[/tex]
We have R to be equal to
[tex]\frac{P_{ope} }{P_{Close} } = \frac{Z1}{Z2}[/tex]
A change in velocity over time is known as?
Answer:
Acceleration
Explanation:
I am writing this because it must be 20 characters to submit
A car in front of the school goes from rest to 27 m/s in 3.0 seconds. What is its acceleration (assuming
it is constant)?
The answer is 13.5 because 27÷3.0=13.5
How far away are the Stars?
Answer:
25,300,000,000,000 miles away
Please im begging you help me
Answer:
21
Explanation:
21
Answer:
speed is equal to distance divided by time
(for the chart i'm assuming that the time is measure in seconds but if not just change the s with whatever time unit you are using)
A. 0.224 m/s
B. 0.230 m/s
C. 0.258 m/s
D. 0.265 m/s
E. 0.301 m/s (fastest speed)
F. 0.217 m/s (slowest speed)
a 25 kg object falls off a cliff and hits the ground 10 seconds later. How much force does the object apply to the ground on impact?
Answer:
Yes
Explanation:
Beacause u have 25 kg,and falls off from a cliff hanger cause its too bit heavy
HELP PLEASE THANKS!! Explain why Gravitational forces are always attractive.
Answer:
cause without gravity, the earth will start to move away from the orbit and crash into the sun like a raining meteor of babies diaper falling on the ground of smelly dunken doughnuts
Explanation:
lol
Which is a characteristic of thermal energy transfer through convection
Answer: The thermal energy transfer is When a fluid, such as air or a liquid, is heated and then travels away from the source, it carries the thermal energy along.
Explanation: heat transfer is called convection. hopefully this was helpful.
What energy conversions take place during these activities?
Riding uphill, the boy's work is converted into magnetic energy, riding on level ground, his work is converted into thermal energy
A
B
Riding uphill the boy's work is converted into thermal energy, riding on level ground, his work is converted into potential energy
c С
Riding uphill, the boy's work is converted into potential energy, riding on level ground, his work is converted into kinetic energy
D
Riding uphill, the boy's work is converted into kinetic energy, riding on level ground, his work is converted into magnetic energy
I'm pretty sure your answer should be
C. Riding uphill, the boy's work is converted into potential energy, riding on level ground, his work is converted into kinetic energy.
Describe how cool and warm air move in the atmosphere.
Answer:
it is cool and warm
Explanation:
2 QUESTION FOR 100 POINTS. PLEASE PROVIDE EXPLANATION
Answer:
(b) 0.0176
(c) -0.0124
(d) 209
(e) Also comes to rest
(a) 2.38
(b) 5.95
Explanation:
(a) Your answer is correct. Angular momentum is conserved, so as the lighter beetle moves clockwise, the heavier turntable will move counterclockwise at a slower speed.
(b/c) Initial angular momentum = final angular momentum
L₀ = L
I₁ ω₁,₀ + I₂ ω₂,₀ = I₁ ω₁ + I₂ ω₂
0 = mr² ω₁ + ½ Mr² ω₂
0 = 2m ω₁ + M ω₂
The beetle's angular velocity relative to the turntable is 0.03 rad/s, so ω₁ = ω₂ + 0.03. Plugging in:
0 = 2 (30 g) (ω₂ + 0.03 rad/s) + (85 g) ω₂
0 = 60ω₂ + 1.8 rad/s + 85ω₂
145ω₂ = -1.8 rad/s
ω₂ = -0.0124 rad/s
ω₁ = ω₂ + 0.03
ω₁ = 0.0176 rad/s
Relative to a stationary observer, the beetle moves 0.0176 rad/s clockwise and the turntable moves -0.0124 rad/s counterclockwise.
(d) Angular distance = angular velocity × time
2π rad = (0.03 rad/s) t
t = 209 s
(e) Angular momentum is conserved. Since both the beetle and the turntable were originally at rest, the turntable will again come to rest when the beetle stops.
(a) Angular momentum is conserved.
L₀ = L
I₀ ω₀ + I₂ ω₀ = I ω + I₂ ω
(I₀ + I₂) ω₀ = (I + I₂) ω
(M (R/2)² + ½ (3M) (R)²) ω₀ = (M (R)² + ½ (3M) (R)²) ω
(¼ MR² + ³/₂ MR²) ω₀ = (MR² + ³/₂ MR²) ω
(¼ + ³/₂) ω₀ = (1 + ³/₂) ω
(1 + 6) ω₀ = (4 + 6) ω
7ω₀ = 10ω
ω = 0.7ω₀
ω = 0.7 (3.40 rad/s)
ω = 2.38 rad/s
(b) Angular momentum is conserved.
L₀ = L
I₀ ω₀ + I₂ ω₀ = I ω
(I₀ + I₂) ω₀ = I ω
(M (R/2)² + ½ (3M) (R)²) (3.40 rad/s) = M (R)² ω
(¼ MR² + ³/₂ MR²) (3.40 rad/s) = MR² ω
(¼ + ³/₂) (3.40 rad/s) = ω
ω = 5.95 rad/s
Notice we could also have used our answer from part a and I₀ = MR².
(I₀ + I₂) ω₀ = I ω
(M (R)² + ½ (3M) (R)²) (2.38 rad/s) = M (R)² ω
(MR² + ³/₂ MR²) (2.38 rad/s) = MR² ω
(1 + ³/₂) (2.38 rad/s) = ω
ω = 5.95 rad/s
One end of a spring with a force constant of k = 10.0 N/m is attached to the end of a long horizontal frictionless track and the other end is attached to a mass m = 2.20 kg which glides along the track. After you establish the equilibrium position of the mass-spring system, you move the mass in the negative direction (to the left), compressing the spring 2.48 m. You then release the mass from rest and start your stopwatch, that is x(t = 0) = −A, and the mass executes simple harmonic motion about the equilibrium position. Determine the following.(a) displacement of the mass (magnitude and direction) 1.0s after it is released
(b) velocity of the mass (magnitude and direction) 1.0s after it is released
(c) acceleration of the mass (magnitude and direction) 1.0s after it is released
(d) force the spring exerts on the mass (magnitude and direction) 1.0s after it is released
(e) How many times does the object oscillate in 12.0s?
Answer:
-2.478
0.379
11.14
24.78
Explanation:
Angular frequency of spring in harmonic motion is given by?
ω = √(k/m)
ω = √(10/2.2)
ω = √4.54
ω = 2.13 s^-1
If at t=0 the mass is in negative amplitude (x = -A = -2.48 m) then we describe the position with negative cosine
x(t) = -A * cos(ωt)
x(t) = -2.48 * cos(2.13 * 1)
x(t) = -2.48 * 0.9993
x(t) = -2.478
Velocity and acceleration are 1st and 2nd derivative of position
b)
v(t) = Aω * sin(ωt)
v(t) = 2.48 * 2.13 * sin(2.13 * 1)
v(t) = 5.282 * sin2.13
v(t) = 5.282 * 0.03717
v(t) = 0.379 m/s
c)
a(t) = Aω^2 * cos(ωt)
a(t) = 2.48 * 2.12² * cos(2.13 * 1)
a(t) = 2.48 * 4.494 * cos2.13
a(t) = 11.15 * 0.9993
a(t) = 11.14 m/s²
d)
F = -k * x(t)
F = -10 * -2.478
F = 24.78 N
Which of the following best decribes the velocity of an object?
a
30 m/s
b
30 m east
С
30 m/s east
d
30 m
The table shows information about two of the major moons of Uranus.
Moon Orbital Period (days) Average Distance from Uranus (km)
Miranda 0.319
129,390
Titania
8.71
435,910
What is the average distance between Miranda and Uranus?
2.84 104 km
1.29 x 105 km
1.47 x 106 km
4.65 x 107 km
Answer:
B. 1.29 x 10^5
Answer:
B. 1.29 x 10^5
Explanation:
just took the test on ed2020
Rank the following cubes in order of the amount of electric flux through their surfaces, from most positive to?
Rank the following cubes in order of the amount of electric flux through their surfaces, from most positive to most negative.
A cube with sides 10 cm long that contains a + 2.00 micro-coulomb point charge
A cube with sides 10 cm long that contains a + 1.00 micro-coulomb point charge
A cube with sides 20 cm long that contains a + 2.00 micro-coulomb point charge
A cube with sides 20 cm long that contains a + 1.00 micro-coulomb point charge
Answer: Ranking : a = c > b > d
Explanation:
The amount of electric flux is directly proportional to the amount of charge enclosed.
The greater the charge enclosed, the greater the electric flux through their surface
a)
A cube with sides 10 cm long that contains a + 2.00 micro-coulomb point charge
∅ = Q/∈₀ = (2.00 x 10⁻³) / (8.85 x 10⁻¹²) = 2.26 x 10⁸ Nm²/C
b)
A cube with sides 10 cm long that contains a + 1.00 micro-coulomb point charge
∅ = Q/∈₀ = (1.00 x 10⁻³) / (8.85 x 10⁻¹²) = 1.13 x 10⁸ Nm²/C
c)
A cube with sides 20 cm long that contains a + 2.00 micro-coulomb point charge
∅ = Q/∈₀ = (2.00 x 10⁻³) / (8.85 x 10⁻¹²) = 2.26 x 10⁸ Nm²/C
d) A cube with sides 20 cm long that contains a + 1.00 micro-coulomb point charge
∅ = Q/∈₀ = (1.00 x 10⁻³) / (8.85 x 10⁻¹²) = 1.13 x 10⁸ Nm²/C
Ranking :
a = c > b > d
Answer:
Using Gauss's Law, the total amount of electric flux through a closed surface is proportional to the charge enclosed. (The surface integral of the electric field over the closed surface equals the enclosed charge divided by the constant of proportionality, the permittivity of free space.) So, since surfaces 1 and 3 have the most positive enclosed charge, they have the most positive electric flux (they have the same). Since surfaces 2 and 4 have the least positive enclosed charge, they have the least positive electric flux. and are the same
thus LHS to RHS; a=c > b=d