Neglecting air​ resistance, the distance s(t) in feet traveled by a freely falling object is given by the function s(t)=16t2​, where t is time in seconds. The height of a certain tower is 840 feet. How long would it take an object to fall to the ground from the top of the​ building?

Answer:

6 m/s

Explanation:

s=2*3

=6

So, the speed of trqnsverse wave is 6 m/s.

Answer:

6 m/s

Explanation:

2 x 3=6

Answer:

A. 5.08 secs.

B. 10.16 secs.

C. 126.50 m.

D. 373.36 m

Explanation:

Data obtained from the question include the following:

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

A. Determination of the time taken to reach the peak.

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

Acceleration due to gravity (g) = 9.8 m/s²

Time (t) =.?

t = u•Sine θ/g

t = (65 × Sine 50) /9.8

t = 5.08 secs.

B. Determination of the total time spent by the ball in air.

Time (t) taken to reach the peak = 5.08 secs.

Total time (T) spent by the ball in air =?

T = 2t

T = 2 × 5.08

T = 10.16 secs

Therefore, the total time spent by the ball in air is 10.16 secs.

C. Determination of the maximum height.

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

Acceleration due to gravity (g) = 9.8 m/s²

Maximum height (H) =..?

H = u²•Sine² θ / 2g

H = 65² × (Sine 50)² / 2 × 9.8

H = 4225 × (Sine 50)² /19.6

H = 126.50 m

Therefore, the maximum height reached by the ball is 126.50 m.

D. Determination of the horizontal distance travelled by the ball.

Initial velocity (u) = 65 m/s

Angle of projection θ = 50°

Acceleration due to gravity (g) = 9.8 m/s²

Horizontal distance (R) =..?

R = u²•Sine 2θ / g

R = 65² × Sine (2×30) / 9.8

R = (4225 × Sine 60) / 9.8

R = 373.36 m

Therefore, the horizontal distance travelled by the ball is 373.36 m

Answer:

It slows down as the cross-section becomes smaller is the correct answer to this question.

Explanation:

Answer;

Motion: A body is said to be in motion if it changes its position with respect to its surroundings.

Explanation:

Rest and motion are the relative terms because they depend on the observer's frame of reference. So if two different observers are not at rest with respect to each other, then they too get different results when they observe the motion or rest of a body .

one example for each. Rest: If a body does not change its position with respect to its surroundings, the body is said to be at rest. ... Motion: A body is said to be in motion if it changes its position with respect to its surroundings.

Answer:

d = 421.83 m

Explanation:

It is given that,

Height, h = 396.9 m

Horizontal speed, v = 46.87 m/s

We need to find the distance traveled by the ball horizontally. Let t is the time taken by the ball. Using second equation of motion for vertical direction. So,

[tex]396.9=0\times t+\dfrac{1}{2}\times 9.8 t^2\\\\t=9\ s[/tex]

Now d is the distance covered by the cannonball. So,

[tex]d=vt\\\\d=46.87\times 9\\\\d=421.83\ m[/tex]

Hence, this is the required solution.

Answer:

(a) and (b)

Explanation:

Energy is the capacity to do work, and exists in various forms. These forms can be converted one to another by the use of appropriate means. Some examples are sound, mechanical, solar, light, which causes the sensation of vision, etc. energy is measured in Joules (J).

The rate of transfer of energy is called power.

i.e Power = [tex]\frac{energy}{time}[/tex]

It is measured in Watts (W).

When a white light is disperses into its colors, gray and black are not part of the colors. And a black sometimes could be as a result of the absorption of all other colors of light.

Answer:-

Cognitive behavioral therapy (CBT) is a form of psychological treatment that has been demonstrated to be effective for a range of problems including depression, anxiety disorders, alcohol and drug use problems, marital problems, eating disorders and severe mental illness.  CBT leads to significant improvement in functioning and quality of life.

Hope this help :)

And can u give brainliest.

The goal of cognitive behavioral therapy (CBT), a type of psychotherapy, is to alter unhelpful thought and behavior patterns.

Cognitive Behavioral Therapy (CBT) is a form of psychotherapy that focuses on changing negative patterns of thinking and behavior. It is a goal-oriented and structured therapy that aims to help individuals identify and modify their thoughts and behaviors that may be contributing to psychological distress.

CBT is based on the idea that the way people think about a situation affects how they feel and how they behave. In CBT, therapists work with clients to identify and challenge negative and irrational thoughts and beliefs, and replace them with more realistic and positive ones. This can lead to improved mood and behavior.

CBT is a collaborative therapy, where the therapist and client work together to set goals and develop strategies to achieve them. CBT typically involves a specific number of sessions, with the number and frequency of sessions varying depending on the individual's needs and goals.

CBT has been found to be effective in treating a wide range of mental health issues, including anxiety disorders, depression, post-traumatic stress disorder, obsessive-compulsive disorder, and eating disorders. It is often used in combination with other treatments, such as medication, and can also be adapted for use with children and adolescents.

Therefore, To change unhelpful thought and behavior patterns is the aim of cognitive behavior therapy (CBT), a type of psychotherapy.

To learn more about Cognitive Behavior Therapy (CBT) click:

brainly.com/question/6112468

#SPJ3

Answer:

distance between two points having phase difference 5.6 rad is

Φ = 2.33 m

Explanation:

given

frequency, f = 130Hz

speed of sound in air, v = 340m/s

distance between two crust or through with phase difference 2[tex]\pi[/tex] = λ (wavelength)

phase difference = 5.6 rad

note: distance between two points having a phase difference = [tex]\frac{ \lambda }{2\pi }[/tex]

∴ distance between two points having phase difference of 5.6 rad is = [tex]\frac{ \lambda }{2\pi }[/tex] ×5.6

Recall

v = f × λ

speed = frequency × wavelength

wavelength = speed/frequency

λ  = v/f

λ  = 340/130 = 2.615 m

∴ distance between two points having phase difference 5.6 rad is = [tex]\frac{ 2.615 }{2\pi }[/tex] ×5.6 = 2.33 m

Answer: 2 seconds

Explanation:

Since I've only memorized a couple of formulas for these things, I need to do the time first:

I'll use the formula  Distance = (1/2) (acceleration) (time)²

20 m = (1/2) (10 m/s²) (time)²

Time² = (20 m) / (5 m/s²)

Time² = 4 sec²

Time = 2 seconds

Now ...

-- When the ball hits the ground, it has been falling for 2 seconds.

-- Its acceleration has caused its speed to increase by 10 m/s every second.

-- So after 2 seconds, its speed has grown to (2 s) (10 m/s²) = 20 m/s .

Answer:

24.1 m/s

Explanation:

Work = change in KE = [tex]KE_{f} - KE_{i}[/tex]

KE initial is 0 because the initial velocity is 0. Therefore, work is equal to final kinetic energy. With that:

[tex]W = KE_{f} = \frac{1}{2}mv_{f}^{2}[/tex]

With some algebraic manipulations,

[tex]v_{f} = \sqrt{\frac{2W}{m} } = \sqrt{\frac{2*450000 J}{1550 kg} } = 24.1 m/s[/tex]

The statement that is the most true regarding the states of matter is the first statement.

A. Most matter on Earth exists as a solid, liquid, or gas.

This is correct since most of the matter on Earth exists in those 3 states, meanwhile plasma is not a state that most of matter on earth is found in since it is mostly associated to stars and the external galactic regions.

Therefore, B is incorrect.

C is false, since almost of all of the matter on earth can transform and change through each of the 3 states of matter, solid, liquid, and gas.

D is false since most of the matter in universe is actually made out of plasma instead of a liquid. In fact, over 99% of the known universe's matter is said to consist of plasma.

Matter can be defined as the material substance which constitutes the observable nature. Most matter on Earth exists as a solid, liquid, or gas. Plasma is also the state of matter found in daily life. The correct option is A.

All the materials which we see in our daily lives are made up of matter. Matter can be classified into different states such as solid, liquid and gas based on the intermolecular forces and the arrangement of particles. All the three states of matter can be converted from one form to another.

The molecules of solid are tightly packed and they have strong intermolecular forces which also has a definite shape and volume. The liquids have weak intermolecular forces than the solids and it acquire the shape of the vessel.

The intermolecular forces in gases are negligible and they do not have any fixed shape or volume.

Thus the correct option is A.

To know more about states of matter, visit;

https://brainly.com/question/1134312

#SPJ2

Answer:

F= GMm/r^2

Explanation:

According to newtons formula for gravitation,

F= GMm/r^2

Answer:

Nanotechnology means working with materials at the scale of one billionth of a metre.

Explanation:

The prefix “nano” refers to one billionth: it’s part of the scientific scale of measurement. Its science, engineering, and technology are conducted at the nanoscale, which is about 1 to 100 nanometers. Nanoscience and nanotechnology are the study and application of extremely small things. Thus, this describes why the term nano is used to describe nanotechnology.

I hope this helps :)

Answer:

Nanotechnology is technology that is about a nanometer in size, or between 1 nm and 100 nm.

Explanation:

its the sample response on edge 2021

Answer:

The correct option is;

d) Parallel to the plane

Explanation:

The forces acting on the box of mass, m are;

Weight of the box acting an angle, θ, equal to the inclination of the plane to the perpendicular of the plane

Weight of the box acting along the plane = m×g×sin(θ)

The force of friction along the plane = μ×m×g×cos(θ)

The total force acting downward along the plane [tex]F_{down}[/tex], = m×g×sin(θ) + μ×m×g×cos(θ)

The Force needed to pull the box up along the plane F = The total force acting downward along the plane

F = m×g×sin(θ) + μ×m×g×cos(θ) = m×g×(sin(θ) + μ×cos(θ))

When the force, Fₐ is applied vertically, the force acting along the plane = Fₐ×cos(θ)

When the force is applied perpendicular, the force acting along the plane = Fₐ×sin(θ)

When the force is applied horizontally, the force acting along the plane = Fₐ×cos(θ)

When the force is applied parallel to the plane, the force acting along the plane = Fₐ

Therefore, since Fₐ > Fₐ×cos(θ) and Fₐ > Fₐ×sin(θ), for acute angles, we have that the least force is required when the force is acting parallel to the plane.

Answer:

52 g was lost as carbon dioxide to the atmosphere

Explanation:

When lead carbonate is heated, it decomposes into two components:

1. Lead oxide

2. carbon dioxide

While the lead oxide remains a yellow solid in the heating container, the carbon dioxide escapes into the atmosphere as a gas. The equation of the reaction is as below:

[tex]PbCO_3_{(s)} --> PbO_{(s)} + CO_2_{(g)}[/tex]

Hence, if a 150 g lead oxide is heated in a container and the final mass is 98 g, it means 52 g (150 - 98) of the total mass has been lost as carbon dioxide to the atmosphere.

Answer:

V=-8.35v

Explanation:

Pls see attached file

Answer:

3360 N

Explanation:

In a first-class lever, the effort force and load force are on opposite sides of the fulcrum.

The lever is 5 m long.  The load force is 1.50 m from the fulcrum, so the effort force must be 3.50 m from the fulcrum.

The torques are equal:

Fr = Fr

(1440 N) (3.5 m) = F (1.5 m)

F = 3360 N

Answer:

0.08

Explanation:

this problem assume that both of whale and submarine are in rest position or in constant linier motion in same direction and same speed.

The sound will travel from Submarine to the whale and back again to submarine. so the time will be like this

t = 2d/v

t = 2*58.8/1520

t = 117.6/1520

t = 0.077368 s

t ≈ 0.08 s (less then 1 s)

Answer:

0.0774s

Explanation:

The formula to find the time of an echo is time = (2)(distance) / (velocity)

So plug in the numbers to the formula

(2)(58.8) / (1520)

= 0.0774s

Answer:

Explanation:

Gain  of kinetic energy + work done by friction = loss of potential energy

= 1 / 2 m ( 25² - 8² ) + work done by friction = m x 9.8 x ( 12 + 12 )

= .5 x 100 x ( 625 - 64 ) + work done by friction = 100 x 9.8 x 24

28050 + work done by friction = 23520

work done by friction = -4530 J

Answer:

Explanation:

For entropy change the formula is

ΔS = ΔQ / T

ΔQ = Δ H

ΔS = Δ H / T

Given

Δ H = + 162.8 kJ

We can take equilibrium temperature as average temperature of the whole process

So, T = 273 + 87 = 360 K

ΔS = Δ H / T

=  162.8 kJ  / 360

= +  0.508 kJ / K .

When the magnitude of the heat transfer for the process is 162.8 kJ, Then the entropy change for the mixing process, in kJ/K is = + 0.508 kJ / K

For The entropy change, the formula is

Then ΔS = ΔQ / T

After that ΔQ = Δ H

Then ΔS = Δ H / T

Given as per question are:

Then Δ H = + 162.8 kJ

Now We can take equilibrium temperature as average temperature of the whole process are:

So, T is = 273 + 87 = 360 K

Then ΔS = Δ H / T

After that = 162.8 kJ / 360

Therefore, = + 0.508 kJ / K.

Find more information about Entropy change here:

https://brainly.com/question/17241209

Answer:

Flexibility Increases

Pre-breathe time decreases

Mass of suit decreases.

Explanation:

Spacesuits are designed for space shuttles when a person goes to explore the galaxy. The spacesuits shuttle era are pressurized at 4.3 pounds per inch. The gas in the suit is 100% of oxygen and there is more oxygen to breathe when the altitude of 10,000 is reached. This will decrease the breathing time and mass of suit.

Answer:

Ammonia, [tex](NH_{3})[/tex]

Explanation:

If a Rac variant, in which the residue at position 61 was replaced with an alanine (Rac-61A), was synthesized. Also, Wild-type Rac and Rac-61A were incubated separately with VopC.

In order to obtain data to support that VopC modifies Rac at residue 61, the samples should be analyzed for the presence of Ammonia ([tex]NH_{3}[\tex]) compound.

In chemistry, the Vanadyl Phthalocyanine (VopC) comprises of a catalytic domain that activates host cells GTPase Rac irreversibly, through the deamide side chain of the residue existing at position 61.

Also, we know that a deamidation reaction gives off Ammonia, [tex](NH_{3})[/tex] and as such when ammonia is present in the sample containing Wild-type Rac but not in Rac-61A, this simply proves or provide the data to support that VopC modifies Rac at residue 61.

Additionally, deamidation can be defined as the chemical conversion (hydrolysis) of an amide functional group such as glutamine, asparagine, in a polypeptide to another functional group such as glutamic acid or isoaspartic acid respectively by treating it with a strong acid (deamidate, transamidase).

The electric potential at the geometric center of this rectangle is determined as 43.2 V.

Potential at the center of the rectangle is calculated as follows;

Distance from each corner to the center is calculated as follows;

[tex]x = \sqrt{(a/2)^2 + (b/2)^2}[/tex]

Potential due to four point charges is calculated

[tex]V = \frac{kq}{x} \\\\V =4 (\frac{kq}{x} )\\\\V = 4(\frac{kq}{\sqrt{(a/2)^2 + (b/2)^2} } )\\\\V = \frac{4 \times 9\times 10^{9}\times 6\times 10^{-9}}{\sqrt{(6/2)^2 + (8/2)^2} } \\\\V = \frac{4 \times 9\times 10^{9}\times 6\times 10^{-9}}{5} \\\\V = 43.2 \ Volts[/tex]

Learn more about electric potential here: https://brainly.com/question/14306881

#SPJ2

Answer:

[tex]\boxed{\mathrm{Density = 1.1 \ g/cm^3}}[/tex]

Explanation:

Volume of fresh water:

Volume = Mass / Density

Volume = 1600/1

[tex]V_{1}[/tex] = 1600 cm³

Volume of sea water:

Volume = Mass / Density

Volume = 1200/1.2

Volume = 1000 cm³

So,

Total Volume when they are mixed = 1600+1000

Total Volume when they are mixed = 2600 cm³

And,

Total Mass when they are mixed = 1600+1200

Total Mass when they are mixed = 2800 g

Now, Measuring the density of the mixture:

Density = Mass / Volume

Density = 2800/2600

Density = 1.1 g/cm³

Answer:

[tex]\mathrm{1.086 \: g/cm^3 }[/tex]

Explanation:

Volume of fresh water ⇒ 1600 cm³

Density of fresh water ⇒ 1 g/cm³

Volume of sea water ⇒ 1200 cm³

Density of sea water ⇒ 1.2 g/cm³

[tex]density=\frac{mass}{volume}[/tex]

[tex]mass=density \times volume[/tex]

Calculate mass of fresh water.

[tex]m=1600 \times 1[/tex]

[tex]m=1600 \: g[/tex]

Calculate the mass of sea water.

[tex]m=1200 \times 1.2[/tex]

[tex]m=1440 \: g[/tex]

Find the density of the mixture.

[tex]density=\frac{mass}{volume}[/tex]

[tex]\rho = \frac{1600+1440}{1600 + 1200}[/tex]

[tex]\rho = \frac{3040}{2800}[/tex]

[tex]\rho= 1.0857...[/tex]

Answer:

The neutron is a subatomic particle, symbol 

n

 or 

n0

, with no electric charge and a mass slightly greater than that of a proton. Protons and neutrons constitute the nuclei of atoms. Since protons and neutrons behave similarly within the nucleus, and each has a mass of approximately one atomic mass unit, they are both referred to as nucleons.[6] Their properties and interactions are described by nuclear physics.

Explanation:

pls mark me as BRAINLIEST

Answer:

B

Explanation:

If the light is pointing down ,and then hits a surface of a 60 degree angle, then the direction will be away from the light since the light is touching a surface that is flat of a 60 degree angle then it will reflect off of it Perpendicular.

Answer:

3.33×10⁸ Pa

Explanation:

Pressure: This can be defined as the force acting normally (perpendicular) per unit area. The S.I unit of force is N/m² or Pa.

P = F/A.................. Equation 1

Where F = force created with the tooth, A = Area.

Given: F = 360 N, A = 1.08 mm² = 1.08/1000000 = 1.08×10⁻⁶m.

Substitute this values into equation 1

P = 360/1.08×10⁻⁶

P = 3.33×10⁸ Pa.

Hence the pressure created = 3.33×10⁸ Pa

Answer:

No. A vacuum does not exist at an altitude of 75,000 ft

Explanation:

There is naturally a decrease in air pressure as one goes higher into the atmosphere. However, vacuum conditions are not actually present within the atmosphere as there are still significant amounts of gases even at really high altitudes.

To prove this we know that planes cannot fly in a vacuum, because they need to burn air in order to gain propulsion from their engines.

One military plane - the SR-71 flew at about 90,000 feet.

This is a lot higher than 75,000 feet. For it to be able to at that altitude, it means that there was a significant quantity of air left even at 90,000 feet.

[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]

Actually Welcome to the Concept of the Mechanics.

So basically here, we know the fact that,

A Generator is opposite of the motor that Converts the Mechanical Energy to Electrical Energy.

C. Concerts Mechanical Energy to Electrical Energy.

Answer:

6m^3

Explanation:

volume of box= length×breadth×height

= 2×3×1

=6m^3

Answer:

i n k ok

Explanation: