The freshwater flatworm, Dugesia tigrina, is an example of an organism that can reproduce both sexually and asexually.
The ability to reproduce sexually as well as asexually provides several advantages to the organism. Because only one parent is required and many offspring can be produced quickly, asexual reproduction can allow for rapid population growth. This is especially advantageous in favourable environments with abundant resources, as the offspring can quickly colonise the area and outcompete other organisms. Asexual reproduction can also ensure that desirable characteristics are passed down from generation to generation.Sexual reproduction, on the other hand, allows for genetic diversity because offspring inherit traits from both parents. This genetic variation can be advantageous in changing or unpredictable environments because it increases adaptability and the ability to deal with new challenges.
learn more about Dugesia tigrina here:
https://brainly.com/question/3115837
#SPJ4
If a gas effuses at a rate 0.52855 times as fast as CI2 what is the gas?
Answer:
The rate of effusion for a gas is inversely proportional to the square-root of its molecular mass (Graham's Law). The gas with the lowest molecular weight will effuse the fastest. The lightest, and therefore fastest, gas is helium.
Explanation:
Calculate the radius of a tantalum atom if its crystal structure is a BCC with a density of 16. 6 g/cm3 and its atomic mass is 180. 9 amu. The unit cell volume of a BCC crystal structure is as follows: VC=64∧3/3√3
The radius of a tantalum atom if its crystal structure is a BCC with a density of 16. 6 g/cm3 and its atomic mass is 180. 9 amu is 1.456 Å.
The radius of a tantalum atom can be calculated using the formula:
r = (3Vc/4πn)[tex]^\frac{1}{3}[/tex]
where Vc is the unit cell volume, n is the number of atoms in the unit cell, and r is the radius of the atom.
For a BCC structure, there are 2 atoms per unit cell, so n = 2. The unit cell volume for a BCC crystal structure is given as:
Vc = (64/3√3)a³
where a is the length of the edge of the cube.
To solve for the radius of the tantalum atom, we need to first calculate the length of the edge of the cube. We can use the density of tantalum to calculate its atomic mass density:
ρ = m/V
where ρ is the density, m is the mass of the unit cell, and V is the volume of the unit cell. For a BCC unit cell, the mass of the unit cell can be calculated as:
m = n × atomic mass
where n is the number of atoms per unit cell and atomic mass is the atomic mass of the element. Substituting the values given, we get:
ρ = m/V = n × atomic mass / Vc
Rearranging the equation and solving for a, we get:
a = (4ρVc/2n×atomic mass)^⁰⁵
Substituting the given values and solving for a, we get:
a = [(4 × 16.6 g/cm³ × (64/3√3)a³) / (2 × 2 × 180.9 g/mol)][tex]^\frac{1}{2}[/tex]
Simplifying the expression, we get:
a = 3.307 Å
Now, we can calculate the radius of the tantalum atom using the formula:
r = (3Vc/4πn)[tex]^\frac{1}{3}[/tex]
Substituting the values we have calculated, we get:
r = [(3 × (64/3√3)a³) / (4π × 2)][tex]^\frac{1}{3}[/tex] = 1.456 Å
Therefore, the radius of a tantalum atom in a BCC crystal structure with a density of 16.6 g/cm3 and an atomic mass of 180.9 amu is approximately 1.456 Å.
Learn more about Tantalum atom:
https://brainly.com/question/11047097
#SPJ4
What is the mass of 4 moles of iron?
13.961 g/mol
55.845 g/mol
223.38 g/mol
446.76 g/mol
223.2g is the mass of 4 moles of iron. Therefore, the correct option is option C.
What is mass?A body's mass is an inherent attribute. Until the discoveries of the atom as well as particle physics, it was thought to be tied to the amount of matter in some kind of a physical body.
It was discovered that although having the same quantity of stuff, various atoms and fundamental particles had varying masses.
moles = mass / molar mass
4 = mass / 55.8
mass =55.8 × 4 =223.2g/mol
Therefore, 223.2g is the mass of 4 moles of iron. The correct option is option C.
To know more about mass, here:
https://brainly.com/question/28704035
#SPJ1
12 moles of hydrogen will produce how many moles of ammonia?
Answer:
Therefore, 12 moles of hydrogen makes 8 moles of ammonia
Looking at the solubility curve above for KClO3, at 30 degrees Celsius how many grams will dissolve to make a saturated solution?
Answer:
This is confused because they don't have choices
In the reaction 2A₂ +2Bo -> 2A₂0 +B2, doubling
the concentration of A2, doubles the rate of reaction but
the reaction rate is
quadripled when the concentration of
Bo is doubled, determine the rate law and order of reaction
The order of a reaction is the sum of the powers of the concentration terms of the reactants in the experimentally determined rate equation for the reaction.
What is rate law?The rate law expresses the experimentally observed rate of a reaction in terms of the molar concentrations of the reactants which determine the rate of a reaction.
The rate law of the given reaction is:
rate = k [A₂]²[B₀]²
If [B₀] = 2B₀
Then the rate law is:
rate = k [A₂]²[2B₀]²
= k [A₂]²4[B₀]²
= 4k
The order of the reaction is 4.
Thus the rate law and order of the reaction is determined.
To know more about rate law, visit;
https://brainly.com/question/14779101
#SPJ1
I NEED THIS QUICK!!!
how many liters of CO2 are produced when 48.92g CaCO3 decomposes?
48.92 g of CaCO3 decomposes to produce 10.94 L of CO2 at STP.
What is calcium carbonate?Carbonic salt of calcium is called Calcium Carbonate.
CaCO3(s) → CaO(s) + CO2(g)
Molar mass of CaCO3 is 100.09 g/mol, so we calculate the number of moles of CaCO3 present as:
48.92 g CaCO3 ÷ 100.09 g/mol = 0.488 mol CaCO3
0.488 mol CO2 are produced
As volume of 1 mole of ideal gas at standard temperature and pressure (STP) is 22.4 L, hence we calculate volume of CO2 produced at STP as:
0.488 mol × 22.4 L/mol = 10.94 L
Therefore, 48.92 g of CaCO3 decomposes to produce 10.94 L of CO2 at STP.
To know more about calcium carbonate, refer
https://brainly.com/question/29671908
#SPJ1
Hydrogen gas produced by this reaction is typically collected via water displacement, during which time the hydrogen gas becomes saturated with water vapor.
A 206.1 mL sample of gas with a total pressure 129
kPa was collected via water displacement at 29.4 °C. Calculate the partial pressure of hydrogen gas in the sample. The vapor pressure of water at 29.4 °C is 4.10 kPa.
Calculate the mass of aluminum that reacted to produce this quantity of hydrogen gas.
The mass of aluminum that reacted to produce this quantity of hydrogen gas is 0.181 g.
What is partial pressure?Partial pressure is a term used in chemistry and physics to describe the pressure that a single gas component would exert if it occupied the same volume as a mixture of gases. In a mixture of gases, each gas exerts a pressure known as its partial pressure, which is proportional to the number of molecules of that gas in the mixture.
To calculate the partial pressure of hydrogen gas in the sample, we can use the following equation:
Partial pressure of hydrogen gas = Total pressure - Vapor pressure of water
Partial pressure of hydrogen gas = 129 kPa - 4.10 kPa = 124.90 kPa
Therefore, the partial pressure of hydrogen gas in the sample is 124.90 kPa.
To calculate the mass of aluminum that reacted to produce this quantity of hydrogen gas, we need to use the balanced chemical equation for the reaction and the ideal gas law. The balanced chemical equation for the reaction of aluminium with hydrochloric acid is as follows:
2Al + 6HCl = 2AlCl3 + 3H2
From the equation, we see that two moles of aluminum react to produce three moles of hydrogen gas. We can use the ideal gas law to calculate the number of moles of hydrogen gas in the sample:
PV = nRT
n = PV/RT
where P is the partial pressure of hydrogen gas, V is the volume of gas collected, R is the gas constant, and T is the temperature in kelvin.
First, we need to convert the temperature from Celsius to kelvin:
T = 29.4 + 273.15 = 302.55 K
Next, we can calculate the number of moles of hydrogen gas:
n = (124.90 kPa)(206.1 mL)/(8.31 L·kPa/mol·K)(302.55 K)
n = 0.0101 moles
Since two moles of aluminum react to produce three moles of hydrogen gas, the number of moles of aluminum that reacted is:
n(Al) = (2/3)n(H2) = (2/3)(0.0101 moles) = 0.00673 moles
Finally, we can use the molar mass of aluminum to calculate the mass of aluminum that reacted:
mass(Al) = n(Al) × molar mass(Al)
mass(Al) = 0.00673 moles × 26.98 g/mol = 0.181 g
To know more about Vapor pressure, visit:
https://brainly.com/question/26127294
#SPJ1
Phenol, C6H5OH, is a weak organic acid. Suppose 0. 505 g of the compound is dissolved in enough water to make 125 mL of solution. The resulting solution is titrated with 0. 123 M NaOH. C6H5OH(aq) + OH-(aq) -> C6H5O-(aq) + H2O(epsilon) What are the concentrations of all of the following ions at the equivalence point: Na+, H3O+, OH-, and C6H5O-? Ka = 1. 3 times 10^-10
At the equivalence point, 0.505 g of phenol reacted with 0.123 M NaOH to form 0.0318 M phenolate ion and 0.0319 M sodium ion, with 0 M hydroxide ion and 0.0318 M H3O+.
The balanced equation for the titration reaction is:
C6H5OH(aq) + OH-(aq) → C6H5O-(aq) + H2O(ℓ)
From the equation, we can see that 1 mole of phenol reacts with 1 mole of hydroxide ion (OH-). To determine the moles of hydroxide ion required to reach the equivalence point, we can use the following equation:
moles of OH- = M × V
where M is the concentration of NaOH, and V is the volume of NaOH required to reach the equivalence point.
To find the volume of NaOH required to reach the equivalence point, we need to calculate the moles of phenol present in the solution. We can use the following equation to do this:
moles of C6H5OH = mass ÷ molar mass
where the molar mass of phenol is 94.11 g/mol.
moles of C6H5OH = 0.505 g ÷ 94.11 g/mol = 0.005368 mol
Since 1 mole of phenol reacts with 1 mole of hydroxide ion, the moles of hydroxide ion required to reach the equivalence point is also 0.005368 mol. Using the equation above, we can calculate the volume of NaOH required:
moles of OH- = M × V
0.005368 mol = 0.123 M × V
V = 0.0437 L = 43.7 mL
Therefore, the volume of NaOH required to reach the equivalence point is 43.7 mL.
At the equivalence point, all of the phenol has reacted with the hydroxide ion, and we have a solution containing only the phenolate ion (C6H5O-) and water. The moles of C6H5O- formed at the equivalence point is equal to the moles of hydroxide ion added:
moles of C6H5O- = moles of OH- added = 0.005368 mol
The volume of the solution at the equivalence point is 125 mL + 43.7 mL = 168.7 mL.
Now, we can use the initial volume and concentration of the phenol solution to calculate the concentration of the phenolate ion and other ions at the equivalence point. The initial concentration of the phenol solution is:
C6H5OH = 0.505 g ÷ (94.11 g/mol × 0.125 L) = 0.424 M
Since the moles of phenol and phenolate ion are equal at the equivalence point, the concentration of the phenolate ion is also 0.005368 mol ÷ 0.1687 L = 0.0318 M.
At the equivalence point, all of the hydroxide ions have reacted with the phenol to form the phenolate ion and water. Therefore, the concentration of hydroxide ion at the equivalence point is 0 M.
The balanced equation also tells us that for every phenolate ion formed, a hydronium ion (H3O+) is also formed. Therefore, the concentration of H3O+ at the equivalence point is equal to the concentration of the phenolate ion:
[H3O+] = 0.0318 M
Finally, to calculate the concentration of sodium ion (Na+) at the equivalence point, we need to consider the balanced equation. For every mole of phenol that reacts, a mole of sodium hydroxide is consumed, forming a mole of sodium phenolate. Therefore, the moles of sodium ion in the solution at the equivalence point is equal to the moles of sodium hydroxide added to reach the equivalence point:
moles of Na+ = moles of NaOH added = 0.123 M × 0.0437 L = 0.00537 mol
The volume of the solution at the equivalence point is 0.1687 L. Therefore, the concentration of sodium ion at the equivalence point is:
[Na+] = 0.00537 mol ÷ 0.1687 L = 0.0319 M
In summary, at the equivalence point of the titration of 0.505 g of phenol with 0.123 M sodium hydroxide solution, the volume of NaOH required is 43.7 mL, and the concentration of the phenolate ion is 0.0318 M, the concentration of hydroxide ion is 0 M, the concentration of H3O+ is 0.0318 M, and the concentration of sodium ion is 0.0319 M.
For such more questions on Equivalence point
https://brainly.com/question/2496608
#SPJ4
How many liters of butane (C4H10) will be needed to produce 1.55L h2O at STP(Standard temperature and pressure)?
Explanation:
Refer to pic.............
What percent of Zn3 (PO4)2 is zine?
Answer:
The percentage of zinc in the compound; Zn3(PO4)2 is 50.65%.
List one use for each of the following minerals.
Chalcopyrite
Pyrolusite
Kyanite
Talc
Chalcopyrite's sole significant application is as a copper ore, yet the significance of this one use cannot be overstated. as a minor copper resource and as examples of minerals.
What distinguishing features does chalcopyrite possess?It is brassy to golden yellow in color and rates 3.5 to 4 on the Mohs scale for hardness. The streak clearly shows a greenish hue to it. Brass yellow with a potential for iridescent purplish tarnish. mainly the disphenoid, resembles a tetrahedron, is frequently large, and occasionally has a botryoidal shape.
Where is chalcopyrite most frequently discovered?Chalcopyrite is a copper and iron sulfide mineral that is the most prevalent copper mineral and a significant copper resource. In ore veins deposited at medium to high temperatures, such as those in Rio Tinto, it often occurs.
To know more about Chalcopyrite's visit :-
https://brainly.com/question/8534303
#SPJ1
A water tank of dimension 2m×5m×8m filled to the brim will have maximum pressure of ------ (Relative density of the material of the tank is 1.8 and r.d of water
i will give brainlest
Answer:
219600 Pa (or 2.196 bar, or 31.9 psi).
Explanation:
weight of water:
volume of water = 2m x 5m x 8m = 80 cubic meters
weight of water = volume of water x density of water x gravitational acceleration
density of water is 1000 kg/m^3 and the gravitational acceleration is 9.81 m/s^2.
weight of water = 80 x 1000 x 9.81 = 784800 N
weight of the tank
volume of tank = 2m x 5m x 8m = 80 cubic meters
weight of tank = volume of tank x density of tank x gravitational acceleration
relative density of the tank material is 1.8, which means its density is 1.8 times that of water, or 1800 kg/m^3.
weight of tank = 80 x 1800 x 9.81 = 1411200 N
The total weight acting on the bottom of the tank is the sum of the weight of the water and the weight of the tank:
Total weight = weight of water + weight of tank = 2196000 N
The max pressure at the bottom of the tank is the total weight divided by the area of the bottom of the tank:
max pressure = total weight / area of bottom of tank
the area of the bottom of the tank is 2m x 5m = 10 square meters.
Max pressure = 2196000 N / 10 m^2 = 219600 Pa
Therefore, your answer is 219600 Pa (or 2.196 bar, or 31.9 psi)
Hope this helped. Let me know if you need any further explanation.
In the reaction between CO and Fe304, the theoretical yield is calculated to be 47.2 g Fe. When a chemistry student carries out the experiment, the actual yield is 42.9 g Fe. Calculate the percentage yield. Round to the nearest whole number and record only your number answer (no % sign).
Answer: 91
Explanation:
Actual/theoretical X 100 = 42.9/47.2 X 100 = 91
find the pressure of 8.88 mol of helium gas at 20.0 C and 180L volume
According to the ideal gas equation, the pressure of 8.88 mole of helium gas at 20.0° C and 180 L volume is 111.97 atmospheres.
What is pressure?Pressure is defined as the force applied on an object perpendicular to it's surface per unit area over which it is distributed.Gauge pressure is a pressure which is related with the ambient pressure.
There are various units by which pressure is expressed most of which are derived units which are obtained from unit of force divided by unit of area . The SI unit of pressure is pascal .
It is a scalar quantity which is related to the vector area element with a normal force acting on it.It is distributed over solid boundaries and across arbitary sections of fluid normal to the boundaries at every point.
According to the ideal gas equation , PV=nRT substitution gives P= 8.88×8.314×273/180=111.97 atmospheres.
Learn more about pressure,here:
https://brainly.com/question/18431008
#SPJ2
What is the condensed formulas and IUPAC name for the following compound:
-ethyl alcohol (in beverages)
Ethanol (also known as ethanol) has the chemical formula [tex]C_{2} H_{5} OH[/tex] and the chemical formula[tex]CH_{3} CH_{2} OH[/tex].
How does a chemical formula work?In a chemical formula, each item's smallest quantity, such as a monomer or formula unit, is listed together with the total atoms in that unit. By referring to the names of the constituent parts and a few straightforward rules, we may name simple mixtures given a chemical formula.
The chemical formula: why is that?The chemical nomenclature of a compound is represented by its chemical formula. It displays the component elements and how many atoms from each element are found in a single complex molecule.
To know more about Chemical Formula visit:
https://brainly.com/question/29031056
#SPJ1
M
on 8.
Rocks are made of minerals, and they are formed in different ways.
crystallization.
Igneous Rock'
weathering,
erosion & deposition
Printable Worksheet - The Rock Cycle - Study Island
sediment
magma
melting
heat & pressure
weathering,
erosion & deposition
compaction & cementation
melting
Metamorphic Rock
1
heat & pressure
Sedimentary Rock
According to the diagram above, how are sedimentary rocks formed?
OA. Wastes deposited by plants and animals decompose and weather.
OB. Sand and other particles are buried, compacted, and cemented together.
OC. Molten rock cools and turns solid.
OD. Other rocks experience intense heat and pressure.
Sand and other particles are buried, compacted, and cemented together.
How does sedimentary rock form?Sedimentary rock is formed from the accumulation and cementation of sediment. The process of sedimentation begins when weathering and erosion break down pre-existing rocks, soils, or organic materials into small pieces, such as sand, silt, or clay. These pieces are then transported by water, wind, or ice and deposited in a new location, such as a river bed, a lake, a delta, or an ocean floor.
Over time, the layers of sediment build up and become buried under more sediment. As the weight of the overlying sediment increases, the pressure on the lower layers also increases. This pressure, combined with the presence of groundwater, causes the minerals in the sediment to dissolve and re-crystallize, forming a cementing agent that binds the sediment particles together. This process is called cementation.
Learn more about sedimentary rock:https://brainly.com/question/10709497
#SPJ1
michelle decides that the sample is from a sedimentary rock. Which sentence explains why michelle classifies the sample as a sedimentary rock
Answer:
Theres a quizzes answer key online, I had these same questions
Explanation:
The layers show that the rock was formed by one or more
minerals that compacted over time.
in a covalent molecular bond atoms blank valence electrons to follow the octet rule in a dot diagram covalent bonds are represented with blank instead of dots
According to the Octet Rule, for a molecule to be stable, all of the atoms must have 8 valence electrons, either by sharing, losing, or acquiring electrons. Atoms typically exchange electrons within covalent bonds in order to adhere to the Octet Rule.
Define covalent bond
The exchange of one or more pairs of electrons between two atoms forms a covalent bond. The two atomic centers are drawing these electrons in unison. When there is insufficient space between two atoms' electronegativities for an electron transfer to take place and create ions, a covalent bond is formed.
To learn more about covalent bonds use:
https://brainly.com/question/3447218
#SPJ1
Which type of bond is sodium bromide
Answer: Ionic bonding
Explanation:
metal + non metal = ionic bond
Sodium = metal
Bromine = nonmetal
Someone does this one thanks
The balanced equation is;
Ba(OH)2 + CO2 → BaCO3 + H2O
How do we balance reaction equation by atom count?Here are the general steps to balance a chemical equation by atom count:
Write the unbalanced equation for the reaction, showing the formulas of the reactants and products.
Count the number of atoms of each element present on the reactant side and the product side of the equation.
Identify the element with the largest atom count that is unbalanced.
Balance this element by adjusting the coefficient of one of the reactants or products.
Recount the atoms of this element on both sides of the equation and adjust the coefficient of another reactant or product as necessary.
Repeat steps 4 and 5 for each element that is unbalanced until the equation is balanced.
Check your balanced equation to make sure that the same number of atoms of each element is present on both the reactant and product sides of the equation.
Learn more about atom count:https://brainly.com/question/30675351
#SPJ1
What kind of insulators and conductors are used in Antarctica?
Wool and polystyrene, which trap air, are effective insulators. Aluminum and other metals are excellent heat conductors. A thermos keeps things cold for longer by limiting the flow of heat.
What is an example of an insulator?It is common to employ insulators like glass, plastic, rubber, air, and wood. Insulators protect us from the potentially dangerous consequences of electricity flowing via conductors. Voltage levels in electrical circuits can occasionally be extremely high.
The top four insulators are:Ceramics, wood, rubber, plastic, and rubber are effective insulators. They are frequently employed in the construction of cooking tools, like as saucepan handles, to prevent heat from rising and burning the cook's hand.
To know more about insulators visit:
https://brainly.com/question/24909989
#SPJ1
Consider the following reaction at equilibrium: co2 h2o ⇔ h2co3. What would be the effect of adding additional h2o?
The adding of additional H2O will result in moving of the equilibrium dynamics to the left, the amounts of CO2 and H2O would increase.
We have equation,
CO₂ + H₂O → H₂CO₃
After adding additional we get,
4CO₂ + 4H₂O → 4H₂CO₃
As equilibrium moves to the left, new reactants are formed by adding extra products to the chemical process. And the equilibrium can be changed by removing a reactant from the system. The chemical equilibrium of the processes is explained by the Le Chatelier's principle. This concept describes how changes in a system's volume, pressure, concentration, and temperature may lead to a new equilibrium state of a process.
The system's equilibrium position lowers the influence of any forced changes in the response state. That example, increasing the temperature will aid in the case of an endothermic process. The presence of a catalyst has no effect on the equilibrium reaction position.
Learn more about Equilibrium:
https://brainly.com/question/30929519
#SPJ4
How do the properties analysed in this activity show periodicity of the chemical elements? For instance, as the ionics radius increases
The properties analyzed in this activity, such as ionic radius, atomic radius, and electronegativity, show periodicity of the chemical elements
It is because they are repeated in a systematic and predictable fashion as you move across a period in the periodic table. Specifically, as you move across a period, the ionic radius increases from left to right. This occurs because the nucleus of elements to the left of the period is larger and has more protons, while the valence electrons increase from left to right, meaning the elements to the right of the period have more electrons that are farther away from the nucleus.
For more question on electrons click on
https://brainly.com/question/371590
#SPJ11
Answer the basic 5W questions about the American Heart Association study of kids' "screen-time" in Montreal, Canada
Answer: Who conducted the study?
The study was conducted by the American Heart Association.
What was the topic of the study?
The topic of the study was kids' "screen-time" and its impact on their health.
Where was the study conducted?
The study was conducted in Montreal, Canada.
When was the study conducted?
The specific timeframe of the study is not provided in the question, so it is unclear when the study was conducted.
Why was the study conducted?
The study was conducted to examine the relationship between kids' "screen-time" and their health, specifically looking at the effects on blood vessel health and arterial stiffness. The study aimed to provide more information about the potential negative impacts of excessive screen time on children's health, and to raise awareness about the importance of limiting screen time in order to promote healthier lifestyles for children.
Explanation:
HELP PLEASE!!!
How many liters of butane (C4 H10) will be needed to produce 1.55L H2O at (STP- Standard temperature and pressure) ?
Explanation:
Refer to pic..........
Suppose Gabriella discovers that a hog farm is polluting a nearby river with chemicals called nitrates. She takes samples of water at various distances from the hog farm and measures the amount of nitrates in each sample. Which of the following graphs has the axes correctly labeled to show her results?
The correct graph to show her results would have the horizontal axis labeled as "Distance from Hog Farm" and the vertical axis labeled as "Amount of Nitrates."
What is Distance?Distance is the measure of how far apart two objects or points are. It is usually measured in units such as miles, kilometers, or meters. Distance is an important concept in mathematics, physics, and other sciences, as it can be used to calculate the time it takes for an object to travel from one point to another. Distance can also be used to measure the size of an object, or the length of a line. Distance can also be used to measure the amount of energy it takes to move an object from one point to another. In short, distance is a measure of the space between two objects or points.
This graph would show how the amount of nitrates increases with increasing distance from the hog farm.
To learn more about Distance
https://brainly.com/question/30195443
#SPJ1
Analyze the given diagram of the carbon cycle below.
Part 1: Which compound does C represent?
Part 2: Name a process that could release this compound into the air.
Part 3: Explain how the elements that form it are conserved during the carbon cycle. Use complete sentences to explain your answer.
Justify how this compound was created from a recycling of carbon in the carbon cycle. Use complete sentences to explain your answer.
Part 1: C represents the compound carbon dioxide (CO2), in the given diagram of the question .
Carbon CyclePart 2: One process that could release carbon dioxide into the air is combustion, which occurs when organic compounds (such as fossil fuels) react with oxygen in the air to produce carbon dioxide and water. Other processes that can release carbon dioxide include volcanic eruptions, natural decay of organic matter, and respiration by living organisms.
Elements that form itPart 3: The elements that form carbon dioxide, namely carbon and oxygen, are conserved during the carbon cycle. This is because carbon is constantly being exchanged between the atmosphere, oceans, and land through processes such as photosynthesis, respiration, and decomposition. When plants undergo photosynthesis, they take in carbon dioxide from the atmosphere and use it to build their biomass, incorporating carbon into their structures. When animals eat plants or other animals, they consume this carbon and release carbon dioxide back into the atmosphere through respiration. When organisms die, their bodies decompose and release carbon back into the environment. In this way, carbon is constantly being recycled through the carbon cycle.
The formation of carbon dioxide from the recycling of carbon occurs during cellular respiration, which is the process by which living organisms break down organic compounds (such as glucose) to release energy. During cellular respiration, carbon-based molecules are oxidized, or combined with oxygen, to produce carbon dioxide as a waste product. This carbon dioxide can then be released back into the atmosphere or taken up by plants through photosynthesis.
To know more about CARBON DIOXIDE (CO2) , visit :
https://brainly.com/question/28151123
#SPJ1
9 mol P4O10 reacts with 51 mol H2O according to the equation below:
P4O10 + 6H2O 4H3PO4
How many moles of H3PO4 form from 9 mol P4O10?
[?} mol H3PO4
Round your answer to the ones place.
From the balanced chemical equation, we can see that 1 mole of P4O10 reacts to form 4 moles of H3PO4. Therefore, we need to find the number of moles of P4O10 to calculate the number of moles of H3PO4.
9 moles of P4O10 reacts with 51 moles of H2O, which means that 9 moles of P4O10 reacts to form 9 moles of H3PO4.
So, the number of moles of H3PO4 formed from 9 moles of P4O10 is 9 mol.
Therefore, the answer is 9 mol.
Answer:
Explanation:
it's 36 my lil sis had the question not long ago so it's 36!! :)
Use the term “viscosity” to explain how wetting agents are
used to help fight fires.
Wetting agents are added to water to lower its surface tension and increase its ability to penetrate porous materials like fabric, wood, and paper, which are difficult to wet with plain water.
Viscosity and fire-fighting wetting agentsViscosity is a measure of a fluid's resistance to flow. Wetting agents are added to water to lower its surface tension and increase its ability to penetrate porous materials like fabric, wood, and paper, which are difficult to wet with plain water.
The lower surface tension caused by the wetting agent allows water to spread out more easily, creating a larger surface area to cool and extinguish flames.
The reduction in viscosity also helps the water to penetrate more deeply into the fuel, making it more effective in firefighting.
More on viscosity can be found here: https://brainly.com/question/30577668
#SPJ1