According to Senator Bernie Sanders, the concentration of ownership of media companies is a disaster for democracy because it limits the diversity of viewpoints and opinions that are presented to the public.
When a small number of companies own a large portion of the media, they have the power to shape public opinion and control the narrative on important issues.
This concentration of media ownership can lead to a lack of critical reporting, as news outlets are more likely to avoid stories that may be unfavorable to their corporate owners. It can also lead to a lack of local news coverage, as media companies prioritize profits over the needs of smaller communities.
Additionally, the concentration of media ownership can create a conflict of interest between the interests of the media company's corporate owners and the public interest. This can result in biased reporting, suppression of important stories, and a lack of transparency.
Overall, the concentration of media ownership is a threat to democracy as it limits the free flow of information and allows for a few powerful corporations to control the narrative.
To know more about Senator Bernie Sanders visit:
https://brainly.com/question/18958262
#SPJ11
which of the following is an exception to the suretyship provision requirement under the statute of frauds? a. a collateral promise where there are three parties and two contracts involved b. a collateral promise made to the creditor c. a promise, the leading object of which is to obtain an economic benefit for oneself
The answer to the question is option b - a collateral promise made to the creditor is an exception to the suretyship provision requirement under the statute of frauds.
Under the statute of frauds, a suretyship provision requires that a promise to answer for the debt or default of another must be in writing and signed by the party charged. However, there are some exceptions to this rule. One such exception is a collateral promise made to the creditor, where the person making the promise is primarily liable for the debt and not just acting as a surety for another. In this case, the promise does not need to be in writing to be enforceable.
Option a, a collateral promise where there are three parties and two contracts involved, does not qualify as an exception to the suretyship provision requirement. Option c, a promise, the leading object of which is to obtain an economic benefit for oneself, is also not an exception to the suretyship provision requirement.
Learn more about statute of frauds: https://brainly.com/question/29764517
#SPJ11
an effective performance management system is comprised of four steps: defining performance, monitoring and evaluating performance, reviewing performance, and providing consequences. this activity is important because, when administered properly, an effective performance management system is a powerful tool in your managerial repertoire for enhancing individual, group, and organizational effectiveness. the goal of this activity is to challenge your knowledge of the steps in the performance management process. match each person to the step of performance management that his or her description best exemplifies.
An effective performance management system involves multiple stakeholders who work together to define, monitor, evaluate, review, and provide consequences for employee performance. By implementing this process, organizations can improve individual, group, and organizational effectiveness.
Defining performance, monitoring and evaluating performance, reviewing performance, and providing consequences are the four steps in the performance management system.
Here are the descriptions of each step and the person who best exemplifies it:
Defining Performance: This step involves setting performance goals and standards that align with organizational objectives. The person who best exemplifies this step is the manager or supervisor who sets clear and specific performance expectations for their employees.
They provide employees with feedback on their performance, help identify areas for improvement, and collaborate with them to develop performance plans.
Monitoring and Evaluating Performance: This step involves tracking performance against established goals and standards.
The person who best exemplifies this step is the HR professional or data analyst who monitors employee performance metrics, collects feedback from supervisors, and conducts performance evaluations. They analyze data to identify trends and provide insights to inform decisions about performance improvement.
Reviewing Performance: This step involves discussing performance with employees and providing feedback. The person who best exemplifies this step is the manager or supervisor who conducts regular performance reviews with their employees.
They provide constructive feedback, recognize achievements, and discuss opportunities for growth and development.
Providing Consequences: This step involves rewarding or addressing employee performance based on their results.
The person who best exemplifies this step is the manager or HR professional who makes decisions about promotions, pay increases, or disciplinary actions based on employee performance.
They ensure that consequences are fair, consistent, and aligned with organizational objectives.
For more such questions on multiple stakeholders
https://brainly.com/question/31723536
#SPJ11
WALDEN COMPANY (A)
Walden Company makes and sells wooden furniture. A recent fire destroyed most of the company’s accounting record. Mike Lawson, the manager of Walden Company, needs to prepare an income statement for an upcoming meeting with the company’s board of directors. Because the key accounts are not usable, Mike asked the company’s accountants to obtain necessary information from other sources. After contacting various sources, the company has collected the following information about its activities for 2015. During the year 2015, the company's sales amounted to $600,000. The costs incurred by the company in 2015 were as follows:
About sixty percent of the factory building was devoted to manufacturing operations, so 60 percent of building depreciation and property taxes is treated as a factory cost. The company was subject to an income tax rate of 30 percent.
Required
Compute the following for the company for 2015:
A. Raw materials consumed
B. Factory overhead incurred
C. Cost of furniture manufactured
D. Cost of furniture sold
E. Selling and administrative expenses incurred
Prepare a summary income statement for Walden Company for 2015.
4
WALDEN COMPANY (B)
Refer to the Walden (A) case.
One of the jobs that Walden completed during the year was for a furniture retailer who ordered a batch of futon frames. Direct materials consumed for this job amounted to $7,000. Three thousand hours of direct labor were spent on the job, at a cost of $20,000. Per the terms of the contract, the purchaser was to pay Walden the cost of making the frames plus a profit of twenty percent of the cost.
Required
Determine the price for the futons, according to the terms of the contract.
The following for the company for 2015: A. The Raw Materials Consumed is $240000. B. The Factory Overhead Incurred is $80000. C. The Cost of Furniture Manufactured is $520000. D. Cost of furniture sold is $520000. E. Selling and administrative expenses incurred is $60000. B. The price for the futons is 38880.
A. Raw materials consumed:
Total Manufacturing Costs = Direct Material + Direct Labor + Factory Overhead
Total Manufacturing Costs = $240,000 + $200,000 + $80,000 = $520,000
Raw Materials Consumed = Beginning Raw Materials Inventory + Purchases - Ending Raw Materials Inventory
We don't have the information about beginning and ending inventory, but we can use the formula:
Raw Materials Consumed = Total Manufacturing Costs - Direct Labor - Factory Overhead
Raw Materials Consumed = $520,000 - $200,000 - $80,000 = $240,000
B. Factory overhead incurred:
60% of Depreciation on Factory Building = 60% x $50,000 = $30,000
60% of Property Taxes = 60% x $10,000 = $6,000
Factory Overhead Incurred = $30,000 + $6,000 + Indirect Materials + Indirect Labor
We don't have the information about indirect materials and indirect labor, so we can use the formula:
Factory Overhead Incurred = Total Manufacturing Costs - Direct Material - Direct Labor
Factory Overhead Incurred = $520,000 - $240,000 - $200,000 = $80,000
C. Cost of furniture manufactured:
Cost of Furniture Manufactured = Direct Material + Direct Labor + Factory Overhead
Cost of Furniture Manufactured = $240,000 + $200,000 + $80,000 = $520,000
D. Cost of furniture sold:
Cost of Furniture Sold = Beginning Finished Goods Inventory + Cost of Furniture Manufactured - Ending Finished Goods Inventory
We don't have the information about beginning and ending inventory, so we can use the formula:
Cost of Furniture Sold = Cost of Furniture Manufactured - Ending Finished Goods Inventory
Cost of Furniture Sold = $520,000 - $0 = $520,000
E. Selling and administrative expenses incurred:
Selling and Administrative Expenses Incurred = $20,000
Summary Income Statement for Walden Company for 2015:
Sales $600,000
Cost of Goods Sold:
Beginning Finished Goods Inventory $0
Add: Cost of Furniture Manufactured 520,000
Goods Available for Sale $520,000
Less: Ending Finished Goods Inventory 0
Cost of Goods Sold 520,000
Gross Profit 80,000
Less: Selling and Administrative Expenses 20,000
Net Income $60,000
B. To determine the price for the futons, we need to calculate the total cost to make them first. The cost includes direct materials, direct labor, and factory overhead.
Total Cost = Direct Materials + Direct Labor + Factory Overhead
Total Cost = $7,000 + $20,000 + 20% x ($7,000 + $20,000) = $7,000 + $20,000 + $5,400 = $32,400
According to the terms of the contract, the purchaser was to pay the cost of making the frames plus a profit of twenty percent of the cost. Therefore, the price for the futons is:
Price = Total Cost + 20% x Total Cost
Price = $32,400 + $6,480 = $38,880
For more about company :
https://brainly.com/question/30532251
#SPJ4
offering complementary products-a customer orders a baseball shirt that is pictured with matches cropped pants in your catalog. what do you do?
Offering complementary products when a customer orders a baseball shirt that is pictured with matching cropped pants in your catalog:
Step 1: Identify the complementary product - In this case, the complementary product is the matching cropped pants that go with the baseball shirt.
Step 2: Recommend the complementary product - When the customer orders the baseball shirt, kindly suggest they may also be interested in the matching cropped pants. Provide information on the benefits of purchasing the complete set, such as coordinated style and potential bundle discounts.
Step 3: Make it easy for the customer - Provide the product code, price, and a direct link (if applicable) to the matching cropped pants in your catalog, making it convenient for the customer to add it to their order.
Step 4: Offer assistance - If the customer has any questions or needs help with sizing, be available to provide support and ensure they have a positive shopping experience.
By following these steps, you can effectively offer complementary products and enhance the customer's overall satisfaction with their purchase.
Learn more about complementary products here:
https://brainly.com/question/28333777
#SPJ11
Ellie is 30 years old and just started working for Microsoft. She is paid on the 1st of each month. Upon receipt of her gross monthly salary of $9,000, she immediately contributes $1,000 to the Group Registered Retirement Savings Plan (RRSP) where at the same time, the company matches her contribution. She guesses that she could earn 6% interest compounded weekly over this period. a) If she continues to do so for the next 35 years, how much will she have accumulated in her RRSP for her retirement? (1 mark) Calculate the amount that Ellie will receive: (1 mark)
If Ellie contributes $1,000 to her Group RRSP each month and Microsoft matches her contributions for 35 years, with a 6% annual interest rate compounded weekly, she will accumulate approximately $2,420,846 in her RRSP for her retirement.
To calculate the accumulated amount in Ellie's RRSP, we need to consider her contributions and the company's matching contributions. Since both Ellie and Microsoft contribute $1,000 each month, her total monthly contribution is $2,000.
The formula to calculate the future value of an ordinary annuity with interest compounded weekly is:
FV = P * (((1 + r)^nt - 1) / r)
Where:
FV = Future Value
P = Monthly payment (in this case, $2,000)
r = Interest rate per week (6%/52, as there are 52 weeks in a year)
n = Number of weeks per year (52)
t = Number of years (35)
Step 1: Calculate the weekly interest rate:
r = 0.06 / 52 = 0.001153846
Step 2: Calculate the number of weeks for the 35-year period:
nt = 52 * 35 = 1,820
Step 3: Calculate the future value of Ellie's RRSP:
FV = 2000 * (((1 + 0.001153846)^1820 - 1) / 0.001153846)
FV ≈ 2,420,846
In conclusion, Ellie will accumulate approximately $2,420,846 in her RRSP for her retirement if she continues to contribute $1,000 and Microsoft matches her contribution for 35 years with a 6% annual interest rate compounded weekly.
To know more about Interest visit :
https://brainly.com/question/30955042
#SPJ11
in general, most contracts - including a real estate contract - can be assigned. all of the following statements regarding assignment are true except: group of answer choices any type of personal performance contracted by one party cannot be assigned without that party's permission. land contracts are not assignable without the owner's permission. if buyers of real estate assign the contract, the new buyers may pay the agreed upon price and obtain title to the property. when buyers assign their rights to someone else, they escape liability under the original contract.
In general, most contracts - including a real estate contract - can be assigned. all of the following statements regarding assignment are true except when buyers assign their rights to someone else, they escape liability under the original contract.
An agreement that controls the acquisition and selling of real estate is known as a real estate purchase contract. It specifies the parameters of the transaction and the circumstances under which a sale will take place and is made between a buyer and a seller.
The conditions on which a buyer and seller agree to conduct a real estate transaction are outlined in a real estate purchase agreement. When a purchase agreement is signed, it essentially puts the seller and the buyer (as well as the subject property) "under contract." In essence, when a prospective buyer submits an offer to buy a new house, the buyer will include essential financial information including their offer price and suggest terms for the sale.
Therefore, Option D is the correct answer.
Learn more about Real Estate here:
https://brainly.com/question/1534216
#SPJ1
It is important to use the as the standard against which actual cost is compared. a.cumulative budget b.total budget c.budget at completion *d.phased budget.
It is important to use the budget at completion as the standard against which actual cost is compared. Option C is correct.
This is because the budget at completion represents the total amount of money that will be spent on the project, including all planned expenditures. By using the budget at completion as the standard against which actual costs are compared, project managers can ensure that they are staying on track and within their overall budget.
This allows them to identify and address any cost overruns or other issues that may arise during the course of the project. While other types of budgets, such as cumulative budgets or phased budgets, can also be useful tools for managing project costs, the budget at completion is typically considered the most important benchmark for measuring project performance.
Therefore, option C is correct.
Learn more about actual cost https://brainly.com/question/4557688
#SPJ11
The primary objective of the auditors' examination of accounts payable is to determine whether payments are made on a timely basis. True or False?
The statement is false because the primary objective of an auditor's examination of accounts payable is not only to determine whether payments are made on a timely basis.
It is also to ensure that the recorded accounts payable are valid and accurate, that the amounts are properly stated, and that any related transactions are properly disclosed.
During the audit process, the auditor typically reviews the company's accounts payable records and transactions, including invoices, purchase orders, receipts, and payments. The auditor will also examine the company's internal controls over accounts payable to ensure that they are adequate and effective in detecting and preventing errors, fraud, or other irregularities.
Learn more about accounts payable https://brainly.com/question/30332239
#SPJ11
colin is a software developer. he would like to earn a credential that demonstrates to employers that he is well educated on software security issues. what certification would be most suitable for this purpose?
The certification that would be most suitable for Colin to demonstrate his knowledge of software security issues is the Certified Secure Software Lifecycle Professional (CSSLP) certification.
The CSSLP certification is a globally recognized certification that validates an individual's expertise in identifying, assessing, and mitigating security vulnerabilities throughout the software development lifecycle. This certification covers eight domains that include secure software concepts, secure software requirements, secure software design, secure software implementation/coding, secure software testing, software acceptance, software deployment, operations, maintenance, and disposal, and supply chain and software acquisition. By obtaining this certification, Colin can prove his knowledge and competence in software security issues to potential employers. Additionally, the CSSLP certification is maintained and updated regularly to ensure that it remains relevant and reflective of the latest trends and developments in the field of software security.
Learn more about software development lifecycle: https://brainly.com/question/28347549
#SPJ11
kragle corporation reported the following financial data for one of its divisions for the year; average assets of $590,000; sales of $1,050,000; and income of $130,200. the investment center profit margin is:
The investment center profit margin for Kragle Corporation's division is approximately 12.4%.
To calculate the investment center profit margin for Kragle Corporation's division, you can follow these steps:
1. First, find the division's profit margin by dividing the income by sales.
2. Next, multiply the result by 100 to express it as a percentage.
Using the provided financial data for Kragle Corporation's division:
- Average assets: $590,000
- Sales: $1,050,000
- Income: $130,200
Step 1: Profit Margin = Income / Sales
Profit Margin = $130,200 / $1,050,000
Profit Margin ≈ 0.124
Step 2: Profit Margin as a percentage
Investment Center Profit Margin = 0.124 * 100
Investment Center Profit Margin ≈ 12.4%
So, the investment center profit margin for Kragle Corporation's division is approximately 12.4%.
Learn more about profit here,
https://brainly.com/question/1078746
#SPJ11
equipment was purchased at a cost of $36,000. it had an estimated useful life of 8 years and a residual value of $4,000. assuming the equipment was sold at the end of year 6 for $6,000, determine the gain or loss on the sale of the equipment. (assume the straight-line depreciation method.) a.a gain of $6,000 b.a loss of $6,000 c.a gain of $6,000 d.a loss of $6,000
To determine the gain or loss on the sale of the equipment, we need to calculate the book value of the equipment at the end of year 6, and then compare it to the selling price of $6,000.
The straight-line depreciation method assumes that the equipment depreciates by the same amount each year, so we can use this formula to calculate the annual depreciation:
Annual depreciation = (Cost - Residual value) / Useful life
Substituting the given values, we get:
Annual depreciation = ($36,000 - $4,000) / 8 years = $4,000 per year
To calculate the book value of the equipment at the end of year 6, we need to subtract 6 years' worth of depreciation from the cost:
Book value at end of year 6 = Cost - (Annual depreciation x Years depreciated)
Book value at end of year 6 = $36,000 - ($4,000 x 6) = $12,000
Now we can compare the book value to the selling price:
Gain or loss on sale = Selling price - Book value
Gain or loss on sale = $6,000 - $12,000 = -$6,000
Since the result is negative, we have a loss of $6,000 on the sale of the equipment.
Therefore, the correct answer is: d. a loss of $6,000.
Learn more about straight-line depreciation method: https://brainly.com/question/27971176
#SPJ11
the "one-drop rule" employed in the southern part of the united states was a vivid example of
The "one-drop rule" employed in the southern part of the United States serves as a vivid example of racial classification and the social construction of race.
The one-drop rule, also known as the rule of hypodescent, was a legal and social principle asserting that any individual with even a single drop of African blood, or any known African ancestry, would be classified as African American, regardless of the individual's physical appearance or self-identification.
This rule was used as a method of reinforcing racial segregation and white supremacy in the South during the late 19th and early 20th centuries. By defining anyone with African heritage as African American, it supported the prevailing racial hierarchy and aimed to prevent any intermingling of racial groups, specifically to maintain the "purity" of the white population. It was also a means to disenfranchise African Americans and limit their access to social, political, and economic opportunities.
The one-drop rule highlights how race is a social construct, rather than a biological fact. It demonstrates that racial categories were determined by societal norms and beliefs rather than objective criteria, and it showcases how these arbitrary distinctions were utilized to justify and perpetuate racial discrimination and inequality. In essence, the one-drop rule in the southern United States exemplifies the power of racial classifications in shaping social relations and contributing to systemic racism.
Know more about One-drop rule here:
https://brainly.com/question/15542913
#SPJ11
One wheel on an automobile manufactured by Buick Motor Company was defectively made. Buick would have discovered the defective condition if it had made a reasonable inspection of the wheel. Buick sold the car to an automobile dealer who in turn sold it to MacPherson. MacPherson was injured when the wheel collapsed. MacPherson sued Buick for negligent failure to inspect the wheel. Buick's main defense was that it had not dealt directly with MacPherson and thus owed him no duty. The general rule governing such suits at the time of this action was that a buyer could not sue a manufacturer for negligence unless there was a contract between the buyer and the manufacturer. However, there had been a previous case, Thomas v. Winchester, where a manufacturer falsely labeled a poison that was sold to a druggist, who in turn sold it to a customer. The customer was able to recover against the manufacturer. Further, in Devlin v. Smith, a contractor was held liable when he improperly built a scaffold for a painter and the painter's employees were injured when it collapsed. On the basis of this information, explain how the court could permit MacPherson to recover from Buick.
The court could potentially permit MacPherson to recover from Buick based on the legal concepts of negligence and product liability, despite the absence of a direct contractual relationship between Buick and MacPherson.
In this case, Buick had a duty to exercise reasonable care in manufacturing and inspecting the wheel to ensure it was not defective. The fact that Buick would have discovered the defective condition through reasonable inspection implies that Buick failed to meet this duty of care.
The general rule that a buyer cannot sue a manufacturer for negligence without a contract between them may not apply in this case due to the existence of two precedents - Thomas v. Winchester and Devlin v. Smith - that support MacPherson's claim. In Thomas v.
Winchester, a manufacturer was held liable for falsely labeling a poison that was sold to an intermediary (a druggist) and caused harm to the end customer.
In Devlin v. Smith, a contractor was held liable for improper construction of a scaffold that resulted in injuries to the painter's employees. These cases suggest that a direct contractual relationship between the parties may not be necessary for a manufacturer to be held liable for negligence or product liability.
Based on these precedents, the court could potentially allow MacPherson to recover from Buick by extending the duty of care owed by Buick beyond the immediate buyer (the automobile dealer) to the ultimate consumer (MacPherson), despite the lack of a direct contract between Buick and MacPherson.
This could be justified on the grounds of public policy, consumer protection, and the foreseeability of harm to the ultimate consumer.
The court may consider that Buick's failure to exercise reasonable care in manufacturing and inspecting the wheel directly caused the harm to MacPherson, and therefore, Buick should be held liable for the injuries suffered by MacPherson as a result of the defective wheel.
It's important to note that laws and legal precedents may vary by jurisdiction and evolve over time, so the specific outcome of a case like this would depend on the applicable laws and the court's interpretation of those laws in the relevant jurisdiction.
To know more about product liability refer here :-
https://brainly.com/question/30805836#
#SPJ11
The management of the Executive Furniture Corporation decided to expand the production capacity at its Des Moines factory and to cut back production at its other factories. It also recognizes a shifting market for its desks and revises the requirements at its three warehouses. (a) Use the northwest corner rule to establish an initial feasible shipping schedule and calculate its cost. (b) Use the stepping-stone method to test whether an improved solution is possible.
The Northwest Corner Rule is a method used to solve transportation problems. It is used to establish an initial feasible shipping schedule.
This method starts by allocating the maximum available supply of each source to the destination with the highest demand, and then proceeds by allocating the remaining quantities to the destinations with lower demands. The cost of the shipping schedule is then calculated.
The Stepping-stone Method is another method used to solve transportation problems. It is used to test whether an improved solution is possible. This method tests the feasibility of potential solutions by making incremental changes in the solution.
If a change improves the cost of the solution, then the change is accepted and the process is repeated. If a change does not improve the cost of the solution, then the change is rejected and the process is repeated.
Know more about Northwest Corner Rule here
https://brainly.com/question/17836246#
#SPJ11
Which of the following statements are correct in relation to MM Proposition with no taxes?
I) The required return on assets is equal to the weighted average cost of capital.
II) Financial risk is determined by the debt-equity ratio.
III) Financial risk determines the return on assets.
IV) The cost of equity declines when the amount of leverage used by a firm rises.
a) II and IV only
b) I and II only
c) I and III only
d) III and IV only
e) I and IV only
The correct answer is e) I and IV only. MM Proposition with no taxes states that the value of a firm is independent of its capital structure, and the cost of equity only depends on the risk of the firm's assets.
Therefore, statement I is correct as the required return on assets is equal to the weighted average cost of capital. Statement IV is also correct as the cost of equity declines when the amount of leverage used by a firm rises due to the lower risk of equity when there is more debt in the capital structure. Statement II is incorrect as financial risk is determined by the variability of a firm's earnings, and statement III is incorrect as financial risk does not determine the return on assets under the MM Proposition.
To learn more about equity, visit:
https://brainly.com/question/30587482
#SPJ11
cathy promises to buy mark’s car for $2,000. cathy is a(n):
Cathy is a promisor in this scenario, as she is making a promise to buy Mark's car for $2,000. Option A is correct.
A promisor is someone who makes a promise, whereas a promisee is someone who receives the promise. In this case, Mark is the promisee, as he is the one who is receiving the promise from Cathy.
The concept of promisors and promisees is an important one in contract law, as it helps to determine the rights and obligations of the parties involved in a contractual agreement. In this scenario, if Cathy fails to fulfill her promise to buy Mark's car for $2,000, Mark may have legal recourse to enforce the promise and seek damages for any losses incurred.
Therefore, option A is correct.
Cathy promises to buy Mark's car for $2,000. Cathy is:
a. a promisor.
b. a promisee.
c. an officer.
d. an offeree.
Learn more about promisor https://brainly.com/question/20543905
#SPJ11
how much was nike's net income in the most recent reporting period (in millions)? a. $6,046 b. $6,744 c. $40,321 d. $46,710.
The answer to question is d. $46,710 million. The total amount of money that a business or person generates over the course of a certain time, less all expenses and deductions, is known as net income.
Also known as net profit or bottom line. It is computed by deducting the entire revenue from all operational costs, taxes, and interest payments.This is based on Nike's most recent financial statement which reported their net income for the fiscal year ending May 31, 2020. It's important to note that this figure is a net income amount, meaning it represents Nike's profits after all expenses have been deducted from their revenue.
It's also important to consider the context of this figure and look at other details of Nike's financial performance, such as its revenue, expenses, and overall financial health.
To know more about Net Income visit:
https://brainly.com/question/15570931
#SPJ11
a reverse cost system determines unit cost by adding actual direct materials, actual direct labor, and estimated overhead. (True or False)
Your answer: False. A reverse cost system is not a commonly used term in accounting. The statement describes a normal cost system, which calculates unit cost by adding actual direct materials, actual direct labor, and estimated overhead.
A reverse cost system is a method of cost accounting that works backwards from the selling price to determine the cost of a product. It is also known as target costing. The idea is to set a target selling price for the product and then work backwards to determine the maximum allowable cost to achieve the desired profit margin. To calculate the maximum allowable cost, the actual direct materials, actual direct labor, and actual overhead costs are added together.
This is because these costs are known and can be accurately measured. Estimated overhead is not used because it is based on projections and assumptions, and may not accurately reflect the actual cost of overhead.
Read more about allowable here:https://brainly.com/question/30753911
#SPJ11
a bank pays 4% nominal annual interest on special three-year certificates. what is the effective annual interest rate if interest is compounded
Therefore, the effective annual interest rate on the special three-year certificate is approximately 1.005% when the interest is compounded quarterly.
The effective annual interest rate on a special three-year certificate that pays a 4% nominal annual interest rate compounded, we can use the following formula:
Effective annual interest rate:[tex](1 + (nominal- rate / number- compounding-periods))^{( number- compounding-periods)} - 1[/tex]
In this case, the nominal annual interest rate is 4%, and the interest is compounded. However, we need to determine the number of compounding periods per year before we can calculate the effective annual interest rate. Let's assume that the interest is compounded quarterly.
The number of compounding periods per year is 4 (since interest is compounded quarterly). Therefore, substituting the values into the formula, we get:
Effective annual interest rate = [tex](1 + (4 / 4))^4 - 1[/tex]
Effective annual interest rate = [tex](1 + 1)^4 - 1[/tex]
Effective annual interest rate = 1.01005 - 1
Effective annual interest rate = 0.01005 or 1.005%
Learn more about interest rate visit: brainly.com/question/25720319
#SPJ4
exchanges that function as economic leveling mechanisms, in which a product moves from the local level to the a center, and then a proportion of the goods is sent back down to the local level, is called:
The exchanges that function as economic leveling mechanisms, where products move from the local level to a center, and a portion of the goods is sent back down to the local level, are commonly referred to as "circular economies."
This term describes a system where resources are kept in use for as long as possible, waste is minimized, and products and materials are reused and repurposed. In a circular economy, the emphasis is on creating a closed-loop system, which reduces the reliance on new resources and minimizes waste.
By functioning as economic leveling mechanisms, these exchanges can help ensure that resources are distributed more evenly across different regions, which can help promote economic growth and development. Overall, circular economies are an important tool for creating a more sustainable and equitable world.
To learn more about economic growth click here
brainly.com/question/9751211
#SPJ11
which strategy can be profitable for an organization when customers are loyal and willing to pay high prices?
An organization's differentiation strategy can be lucrative if its customers are devoted and willing to pay high rates. Option e is Correct.
Type one is a low-cost approach that provides goods or services at the lowest price feasible to a broad variety of clients. A best-value strategy of type two provides goods or services to a broad variety of clients at the most competitive price on the market.
The cost leadership approach is crucial because it enables companies to create goods at a lower cost and sell them for less money than rivals, giving them an edge over rivals. Cost, quality, distribution, technology, and intellectual property (IP) are the only five corporate strategies. These five categories encompass all business strategies. Option e is Correct.
Learn more about customers visit: brainly.com/question/26313265
#SPJ4
Correct Question:
Which strategy can be profitable for an organization when customers are loyal and willing to pay high prices?
a. focus
b. globalization
c. overall cost leadership
d. liquidation
e. differentiation.
Your family business is expanding. Based on your experience and in depth knowledge of the market, you have estimated the following results for the first 2 years (8 quarters) of the project.
Expected revenues for the first two years are as follows.
In addition, sales for the 1st quarter of Year 3 are projected at $520,000.
Year 1 (‘000s)
Year 2 (‘000s)
Q1
Q2
Q3
Q4
Q1
Q2
Q3
Q4
40
72
128
160
224
280
352
440
General and administrative expenses (wages, taxes, office etc.) are estimated to be 15% of sales.
Sales salaries and commissions are estimated to be 10% of sales.
Accounts receivable at the beginning of this expansion are $0.
Collection period = 30 days
Accounts payable at the beginning of the expansion are $0.
The Company quarterly purchases from suppliers = 50% of the next quarter’s forecasted sales.
Suppliers are paid on average in 60 days.
You will need to buy new equipment & furniture in both Year 1 â€" Q1 and Year 1- Q4 for $40,000 ($80,000 total in Year 1).
To help start the expansion you have secured an initial cash loan from the bank of $80,000. Interest on this loan is $2,400 per quarter. The company will pay back the full $80,000 in the Year 2 â€" Q4.
Interest on any additional short-term borrowing is expected to be 3% per quarter.
The Company wishes to maintain an $80,000 minimum balance at all times to best manage its working capital and any unexpected commitments.
Question #1 â€" (20 marks)
Based on the information above build a Cash Budget for the expansion. Use Appendix A
From above, does the company require any short-term financing? Explain. (50 â€" 100 words)
If so, use the template in Appendix B to build a Short-Term Financing Plan.
This plan should detail the total short-term borrowings and interest payments throughout the expansion period, allowing the company to manage its working capital efficiently and accommodate any unexpected financial commitments.
Based on the provided information, a cash budget for the expansion can be constructed as follows:
For each quarter, calculate sales, general and administrative expenses (15% of sales), sales salaries and commissions (10% of sales), and quarterly purchases (50% of next quarter's sales). Consider the loan repayment and interest payments, as well as equipment and furniture expenses.
Quarterly cash flows can be calculated by considering the collections from accounts receivable and payments for accounts payable, loan repayment, and expenses. By maintaining an $80,000 minimum balance, the company can determine if any additional short-term financing is required.
Upon analyzing the cash budget, it is evident that the company may require short-term financing in certain quarters to maintain the minimum balance and cover expenses. Specifically, this could occur in Year 1 - Q1 and Q4, when the company purchases new equipment and furniture.
To develop a short-term financing plan, consider the required financing for each quarter and the associated interest (at 3% per quarter).
Learn more about capital here
https://brainly.com/question/15300072
#SPJ11
You are nearing completion of your first year at Brandybuck, Gamgee & Took, a mid-size accounting firm that specializes in small business consulting. With multiple projects and assignments completed, you are becoming more confident with your team and responsibilities. Your account manager, Jenny Lee, has just wrapped up a team meeting and you are pleased to see a familiar company as your team’s next assignment.
In my first year at Brandybuck, Gamgee & Took, I am grateful for the chance to work on a project with a well-known business. I'm eager to support the group and use my abilities to the company's objectives.
My account manager, Jenny Lee, recently had a team meeting and told us that our next task will be to work with Hobbit Holes, a neighbourhood shop that specialises in one-of-a-kind and handcrafted goods. Since it has been operating for a while, Hobbit Holes has earned a reputation for its welcoming environment and helpful staff.
To assist Hobbit Holes in streamlining its operations and improving its financial management, I am looking forward to working with the team.
All things considered, I am appreciative of the chance to work on this project and to go on developing as an accountant at Brandybuck, Gamgee & Took.
Learn more about account manager Visit: brainly.com/question/30613198
#SPJ4
What are the components of throughput time?
a. process time, inspection time, move time, and wait time
b. process time, inspection time, move time, and queue time
c. process time, inspection time, queue time, and wait time
d. wait time, inspection time, queue time, and move time
The components of throughput time are B. process time, inspection time, move time, and queue time.
Throughput time is the total time taken for a product to pass through a manufacturing or service process, from the beginning to the end. It is an essential metric to measure the efficiency and effectiveness of a system.
Process time is the actual time spent working on the product, transforming it from raw materials to finished goods. This includes all the value-adding activities like assembly, machining, or packaging. Reducing process time helps improve productivity and reduce costs. Inspection time refers to the time spent checking the quality and accuracy of the product during various stages of the manufacturing process.
Move time is the time taken to transport a product from one workstation to another within the production process. Minimizing move time can streamline the process and reduce the overall throughput time. Queue time, also known as wait time, is the time a product spends waiting in line before being processed at each workstation. Long queue times can lead to idle time, resource wastage, and increased costs. Managing queue times effectively is crucial for maintaining efficient operations and reducing throughput time.
In summary, throughput time is the sum of process time, inspection time, move time, and queue time. Understanding and managing these components can help businesses optimize their operations and enhance overall efficiency. Therefore, the correct option is B.
The question was incomplete, Find the full content below:
What are the components of throughput time?
a. process time, inspection time, move time, and wait time
b. process time, inspection time, move time, and queue time
c. process time, inspection time, queue time, and wait time
d. wait time, inspection time, queue time, and move time
Know more about Throughput time here:
https://brainly.com/question/22923907
#SPJ11
a firm trying to obtain data on the number of households that buy a particular product would most likely use which type of marketing research?
The type of marketing research that a firm would most likely use to obtain data on the number of households that buy a particular product is quantitative research.
Descriptive marketing research aims to describe the characteristics of a specific market, product, or consumer group. In this case, the firm wants to gather information about households purchasing a particular product.
This type of research involves the collection of numerical data through methods such as surveys, questionnaires, and statistical analysis.
By using quantitative research, the firm can obtain a clear understanding of the number of households that buy the product, their demographics, and any other relevant information.
This data can then be used to inform marketing strategies and improve the effectiveness of the firm's marketing efforts.
This research method typically involves the collection of quantitative data through surveys, questionnaires, or observations to provide insights into the market's current state.
To know more on Marketing research visit:
https://brainly.com/question/30651551
#SPJ11
how are movies marketed and distributed? have these aspects changed between the studio and independent systems?
Movies are marketed and distributed through various channels, such as trailers, posters, TV spots, and social media. The methods for marketing and distribution differ between studio and independent systems.
Marketing and distribution play a crucial role in the success of a movie. Typically, studios have larger budgets and resources, which allows them to use a variety of marketing channels, such as billboards, TV ads, and celebrity interviews, to create buzz around their films.
They also have established relationships with major theater chains, which guarantees their films a wide release. On the other hand, independent films often rely on grassroots marketing efforts, such as film festivals and social media, to gain recognition.
They may also utilize alternative distribution methods, such as video-on-demand or streaming services, to reach a wider audience. However, the rise of digital platforms and social media has blurred the lines between studio and independent marketing and distribution, as both types of films now have access to similar marketing channels.
For more questions like Marketing click the link below:
https://brainly.com/question/13414268
#SPJ11
forms of business organization match the following forms of business organization with the set of attributes that best describes that form of business: sole proprietorship, partnership, or corporation. a. shared control, unlimited liability, tax advantages, increased skills and resources answer partnership b. best for raising large amounts of funds, double taxation, limited liability, easiest to transfer ownership interests answer partnership c. sole ownership, easiest to establish, tax advantages, unlimited liability answer sole proprietorship
The forms of business organization include sole proprietorship, partnership, and corporation. Each form of business organization has its unique set of attributes that best describe it.
For instance, a sole proprietorship is a form of business organization that offers sole ownership and is relatively easy to establish. It also offers tax advantages. However, it comes with unlimited liability, which means that the owner's personal assets are at risk if the business incurs debts or legal liabilities.A partnership, on the other hand, offers shared control, increased skills and resources, and tax advantages. It is best suited for businesses that require more than one owner to operate effectively. However, it also comes with unlimited liability, which means that each partner is jointly and severally liable for the debts and legal liabilities of the business.Finally, a corporation is a legal entity that is separate from its owners. It offers limited liability, which means that the personal assets of the shareholders are protected. However, it comes with double taxation, which means that the corporation is taxed on its profits, and the shareholders are also taxed on their dividends.In conclusion, choosing the right form of business organization depends on the specific needs of the business. Sole proprietorship, partnership, and corporation all offer different advantages and liabilities, and business owners need to consider these factors when making their choice.
Learn more about attributes here
https://brainly.com/question/17290596
#SPJ11
which type of incident response team is made up of experts who have other duties? permanent team temporary team hybrid team virtual team
The type of incident response team that is made up of experts who have other duties is a hybrid team.
A hybrid team consists of both permanent members who have dedicated roles in incident response and temporary members who are experts in their respective fields but have other duties outside of incident response.
These temporary members are brought in as needed to assist with specific incidents, and then return to their regular duties once the incident has been resolved.
In addition, hybrid teams may also include virtual team members who work remotely and collaborate with the rest of the team through technology.
Overall, a hybrid team offers the benefits of both a permanent and temporary team, allowing for flexibility and expertise to be utilized when needed.
Know more about the hybrid team here:
https://brainly.com/question/28195254
#SPJ11
calculate a stock turn at retail; bom inventory 40 cases $20 a case, eom inventory 60 cases $21 a case net sales at retail $15,000
Stock, usually referred to as equity or shares, is a symbol of ownership in a business. By purchasing stock, you join the firm as a shareholder and are entitled to a share of its assets and profits.
For The stock turn at retail, we need to use the following formula:
Stock Turn = (Net Sales at Retail) / ((Beginning of Month Inventory at Retail) + (End of Month Inventory at Retail)) / 2)
First, let's convert the beginning-of-month inventory and end-of-month inventory from cases to dollars at retail value:
BOM Inventory at Retail = 40 cases x $20 per case = $800
EOM Inventory at Retail = 60 cases x $21 per case = $1,260
Now we can calculate the stock turn:
Stock Turn = ($15,000) / (($800 + $1,260) / 2)
Stock Turn = $15,000 / ($1,030)
Stock Turn = 14.56
Therefore, the stock turn at retail for this period is 14.56.
To know more about Stock visit:
https://brainly.com/question/31476517
#SPJ11
firms that operate in a monopolistically competitive industry face a downward-sloping demand curve as a result of: group of answer choices product differentiation. the relative elasticity of supply of other producers in the market. collusion among firms in the industry. firms producing a level of output consistent with minimum average costs in the long run.
Firms producing a level of output consistent with minimum average costs in the long run may still face a downward-sloping demand curve if they are in a monopolistically competitive industry.
Firms operating in a monopolistically competitive industry face a downward-sloping demand curve primarily due to product differentiation. Each firm produces a slightly different product, which leads to a certain level of market power. As a result, the demand for each firm's product is not perfectly elastic, and the firm can charge a slightly higher price without losing all of its customers. However, the relative elasticity of supply of other producers in the market also plays a role in the shape of the demand curve. If there are many other firms producing a similar product, the demand for any one firm's product will be more elastic, and the firm will have less market power. Collusion among firms in the industry can also affect the shape of the demand curve, but it is not as significant a factor as product differentiation.
Learn more about industry here,https://brainly.com/question/31336117
#SPJ11