Answer:
Sure, here's the SQL query for you: ``` SELECT ID, first_name, last_name FROM customers WHERE first_name LIKE 'S%'; ``` This will select the ID, first name, and last name of each customer whose first name begins with the letter S. The `LIKE` operator is used to match the first letter of the first name with the letter S.
672.2The internet 24A buffer is 2MiB in size. The lower limit of the buffer is set at 200KiB and the higher limit is set at 1.8MiB.Data is being streamed at 1.5Mbps and the media player is taking data at the rate 600kbps.You may assume a megabit is 1048576bits and a kilobit is 1024bits.a)Explain why the buffer is needed.[2]b)i)Calculate the amount of data stored in the buffer after 2 seconds of streaming and playback.You may assume that the buffer already contains 200KiB of data.[4]ii)By using different time values (such as 4 secs, 6 secs, 8 secs, and so on) determine how long it will take before the buffer reaches its higher limit (1.8MiB).[5]c)Describe how the problem calculated in part b) ii) can be overcome so that a 30-minute video can be watched without frequent pausing of playback
a) The buffer is needed to ensure smooth playback of streamed media by storing a certain amount of data in advance. This is done to prevent interruptions due to network congestion or variations in the streaming rate.
How to calculate the datab) i) The amount of data streamed in 2 seconds is (1.5Mbps * 2s) = 3MB. The amount of data played back in 2 seconds is (600kbps * 2s) = 150KB. Therefore, the amount of data stored in the buffer after 2 seconds is (3MB - 150KB - 200KiB) = 2.6MB.
ii) To determine how long it will take before the buffer reaches its higher limit of 1.8MiB, we can use the following formula:
Time to reach limit = (higher limit - lower limit - current buffer size) / streaming rate
= (1.8MiB - 200KiB - 2MiB) / 1.5Mbps
= 8 seconds
Therefore, it will take 8 seconds for the buffer to reach its higher limit.
c) To overcome the problem of frequent pausing of playback, a larger buffer can be used. This will allow more data to be stored in advance, reducing the impact of network congestion or variations in the streaming rate.'
Additionally, adaptive bitrate streaming can be used, where the streaming rate is dynamically adjusted based on the available network bandwidth, to ensure a more consistent streaming experience. Finally, a content delivery network (CDN) can be used to deliver the media from servers located closer to the viewer, reducing the impact of network latency and improving overall streaming performance.
Read more about buffer sizes here:
https://brainly.com/question/30557054
#SJP1
16.
is a field of study that helps to protect electronic data.
O A. Cyberterrorism
O B. Digital security
O C. Hacking
D. Cybersecurity
3.4.4 go down the slide part two code pls
It seems like you are looking for help with a coding problem related to "3.4.4 go down the slide part two." To better assist you, I will need more context and information about the coding language and problem details.
However, here is a general outline of how to approach a slide-based coding problem:
1. Identify the programming language you are using (e.g., Python, JavaScript, Java, etc.).
2. Define the slide structure and any related variables or objects. For example, in an object-oriented language, you might create a Slide class with properties like height, width, and position.
3. Create a function or method for the "go down the slide" action. This function should take any necessary parameters (e.g., user input or slide properties) and return an updated state for the slide and/or user.
4. Implement the logic for moving down the slide, taking into account any physics or rules specific to your problem. This could involve updating the position, velocity, or other attributes of the user and slide objects.
5. Test your code to ensure it works correctly, and modify it as needed based on the desired outcome or any additional requirements.
Please provide more information about your specific problem so I can offer more tailored guidance.
For such more question on programming
https://brainly.com/question/16936315
#SPJ11
12 How can an antivirus protect your device?
A. It can backup data
B. It can increase its performance.
C.
can prevent data from getting corrupt.
D. It can protect it from overheating.
with
Answer:
C. can prevent data from getting corrupt.
Explanation:
#include
#include
#include
#include
using namespace std;
class user{
protected:
string courseCode,coursename,desc,position,un,pw;
public:
void welcome(){
cout<<"========Welcome to the university student registration system========"< >position;
}
string login(){
int count=0;
string sa;
cout<<"Enter user name: ";
cin>>un;
cout<<"Enter password: ";
cin>>pw;
ifstream input("user.txt");
while(!input.eof()){
getline(input,sa);
if((count=sa.find(un,0))!=string::npos){
if((count=sa.find(pw,0))!=string::npos){
cout<<"Your Login is successful"< >courseCode;
myfile1< >nic;
myfile2< >pos;
myfile2< >un;
myfile2< >pw;
myfile2< >fword;
viewStudent();
}
list.close();
remove("temp.txt");
}
void viewStudent(){
ifstream stdata("user.txt");
while(!stdata.eof()){
getline(stdata,data);
if((count=data.find(fword,0))!=string::npos){
cout< >un;
cout<<"Enter password: ";
cin>>pw;
ifstream input("user.txt");
while(!input.eof()){
getline(input,sa);
if((count=sa.find(un,0))!=string::npos){
if((count=sa.find(pw,0))!=string::npos){
cout<<"Your Login is successful"< >courses;
for(int i=0;i >choice;
regsubs< >position;
cout<<"\n1.Login\n2.Exit";
cin>>choice;
switch(choice){
case 1:
if(position=="admin"){
a1.login();
cout<<"Do you need....\n1.Create new account\n2.Create new course"< >choice2;
if(choice2==1){
a1.createAccount();
}
else if(choice2==2){
a1.createCourse();
}
}
else if(position=="management"){
m1.login();
m1.seeStudents();
}
else if(position=="lecturer"){
ac1.login();
//returnval2=
ac1.getusername();
ac1.listStudent();
//ac1.viewStudent();
}
else if(position=="student"){
name= s1.login();
if(name!="f"){
s1.subReg();
}
}
else{
cout<<"not a valid user";
}
break;
case 2:
cout<<"Thank you for visiting..."<
break;
}
return 0;
}
This code seems to be a student registration system where users can create accounts, register for courses, and view their information. It includes classes for different types of users, such as administrators, management, lecturers, and students.
What does the code do?The code starts by including several libraries, including iostream and fstream, which are used for input and output and file handling, respectively.
The main class is called "user," which is then inherited by other classes for different types of users. The "user" class has several protected variables, including courseCode, coursename, desc, position, un, and pw, which are used to store information such as course codes, course names, descriptions, and user login credentials.
The "welcome" function is used to display a welcome message to the user, while the "login" function is used to prompt the user to enter their login credentials and check if they are valid.
The "viewStudent" function is used to display information about the student, such as their courses and registration details.
The main function includes a menu that allows users to log in and perform various actions, such as creating new accounts, registering for courses, and viewing information. The menu is implemented using a switch statement that calls different functions based on the user's position.
Overall, the code seems to be a work-in-progress, with several missing pieces, such as the implementation of the "createAccount" and "createCourse" functions, and some parts of the code seem to be incomplete, such as the "regsubs" function, which is missing the implementation of the switch statement.
Read more about programs here:
https://brainly.com/question/26134656
#SPJ1
Create a program using classes that does the following in the zyLabs developer below. For this lab, you will be working with two different class files. To switch files, look for where it says "Current File" at the top of the developer window. Click the current file name, then select the file you need.
(1) Create two files to submit:
ItemToPurchase.java - Class definition
ShoppingCartPrinter.java - Contains main() method
Build the ItemToPurchase class with the following specifications:
Private fields
String itemName - Initialized in default constructor to "none"
int itemPrice - Initialized in default constructor to 0
int itemQuantity - Initialized in default constructor to 0
Default constructor
Public member methods (mutators & accessors)
setName() & getName() (2 pts)
setPrice() & getPrice() (2 pts)
setQuantity() & getQuantity() (2 pts)
(2) In main(), prompt the user for two items and create two objects of the ItemToPurchase class. Before prompting for the second item, call scnr.nextLine(); to allow the user to input a new string. (2 pts)
(3) Add the costs of the two items together and output the total cost. (2 pts)
Here's the code:
The CodeItemToPurchase.java:
public class ItemToPurchase {
private String itemName;
private int itemPrice;
private int itemQuantity;
public ItemToPurchase() {
itemName = "none";
itemPrice = 0;
itemQuantity = 0;
}
public void setName(String name) {
itemName = name;
}
public String getName() {
return itemName;
}
public void setPrice(int price) {
itemPrice = price;
}
public int getPrice() {
return itemPrice;
}
public void setQuantity(int quantity) {
itemQuantity = quantity;
}
public int getQuantity() {
return itemQuantity;
}
}
ShoppingCartPrinter.java:import java.util.Scanner;
public class ShoppingCartPrinter {
public static void main(String[] args) {
Scanner scnr = new Scanner(System.in);
ItemToPurchase item1 = new ItemToPurchase();
System.out.println("Item 1");
System.out.println("Enter the item name:");
item1.setName(scnr.nextLine());
System.out.println("Enter the item price:");
item1.setPrice(scnr.nextInt());
System.out.println("Enter the item quantity:");
item1.setQuantity(scnr.nextInt());
scnr.nextLine();
ItemToPurchase item2 = new ItemToPurchase();
System.out.println("\nItem 2");
System.out.println("Enter the item name:");
item2.setName(scnr.nextLine());
System.out.println("Enter the item price:");
item2.setPrice(scnr.nextInt());
System.out.println("Enter the item quantity:");
item2.setQuantity(scnr.nextInt());
int totalCost = item1.getPrice() * item1.getQuantity() + item2.getPrice() * item2.getQuantity();
System.out.println("\nTotal cost: $" + totalCost);
}
}
This implementation creates two objects of the ItemToPurchase class, prompts the user for their names, prices, and quantities, calculates the total cost, and prints it out.
Read more about programs here:
https://brainly.com/question/26134656
#SPJ1
HELP
Which of the following is an example of an object-oriented programming language?
A) Ruby
B) Python
C) C++
D) HTML
Answer:Java, C++, and Ruby
Explanation:
Like Python and JavaScript, many languages that are not strictly object-oriented also provide features like classes and objects inspired by object-oriented programming.
what is computer suytem?
A computer is a tool that may be designed to perform a series of mathematical or logical processes automatically. Several generic sets of operations known as programs can be carried out by modern digital electronic computers. Many different jobs can be carried out by computers thanks to these programs.
What function does a computer system serve in modern society?Word processing, financial management, and database administration are the three most frequent uses of computers. To manage vast amounts of dynamic data on issues including customers, suppliers, staff, inventories, supplies, product orders, and service requests, database systems are used.In homes, there are many different uses for computers. They are helpful for online banking, paying bills online, playing games, streaming movies, playing music, and other activities including online education and banking. Through email or social media, are also a fantastic way for family members to communicate with one another.You can communicate with your friends, watch films and movies, listen to music, play a game that you enjoy, and watch.To learn more about the computer systems, refer to:
https://brainly.com/question/21474169
2/ kinite a program in pascall language that prompts the user to enter the amount of fe as paid. When the amount of fees paid is less than 20000 the program displays a message cyber services denied
Answer:
Examples of few editors include Windows Notepad, OS Edit command, Brief, Epsilon, EMACS, and vim or vi. Name and version of text editor can vary on different operating systems. For example, Notepad will be used on Windows and vim or vi can be used on windows as well as Linux or UNIX.
Explanation: If this is not what your look for then am sorry but i can't help you.
Deciding you need to get a "good" job because that is what "smart" people do, reflects intrinsic motivation.
Deciding you need to get a "good" job because that is what "smart" people do, reflects intrinsic motivation is false.
What is intrinsic motivation?Intrinsic motivation refers to engaging in an activity or behavior because it is inherently enjoyable or fulfilling, rather than for any external reward or pressure. For example, someone who enjoys playing the piano because it brings them joy and a sense of accomplishment is intrinsically motivated to play the piano.
Extrinsic motivation, on the other hand, refers to engaging in an activity or behavior for external reasons, such as receiving a reward, avoiding punishment, or meeting external expectations. For example, someone who practices the piano to win a music competition or to please their parents is extrinsically motivated to play the piano.
Therefore, In the given statement, the motivation for getting a "good" job is based on external factors such as societal expectations and the desire for success and status, rather than internal enjoyment or fulfillment.
Read more about motivation here:
https://brainly.com/question/15542056
#SPJ1
Read in a 3-character string from input into variable userCode. Declare a boolean variable isValid and set isValid to true if userCode only contains digits. Otherwise, set isValid to false.
Ex: If the input is 836, then the output is:
Passcode is valid
Note: Use getline(cin, userCode) to read the entire line from input into userCode.
in c++?
The program based on the information is given below.
How to write the programHere's a C++ code snippet that reads a 3-character string from input into variable userCode, checks if it only contains digits, and sets the boolean variable isValid accordingly:
#include <iostream>
#include <string>
using namespace std;
int main() {
string userCode;
bool isValid = true;
getline(cin, userCode); // read input into userCode
// check if userCode contains only digits
for (char c : userCode) {
if (!isdigit(c)) {
isValid = false;
break;
}
}
// output result based on isValid
if (isValid) {
cout << "Passcode is valid" << endl;
} else {
cout << "Passcode is not valid" << endl;
}
return 0;
}
Note that the code uses the isdigit function from the <cctype> library to check if each character in userCode is a digit.
Learn more about program on
https://brainly.com/question/1538272
#SPJ1
What type of device is a printer?
Answer:
Explanation:
A printer is an output device which prints a hard copy of the electronic data that is stored in the computer or any other devices. The electronic data may include documents, text, images or even the combination of all three. Particular printers are available for printing particular data types.
why do some people worry that the European Union may restrict neon lights
Due to worries about energy efficiency and the environment, some people are concerned that the European Union may ban neon lights. Neon lights need a lot of electricity and have gas inside them.
What effects do neon lights have on the environment?Because neon is chemically inert and doesn't create any compounds, it has no effect on the environment and poses no threat to it. There is no evidence that this element harms the environment.
What was the reason of the neon lights' light emission?Neon lights are a type of cold cathode gas discharge light.. A sealed glass tube with a metal electrode at each end that is filled with one of many gases under low pressure is known as a neon tube.
To know more about European Union visit:-
https://brainly.com/question/1683533
#SPJ1
URGENT NEED HELP WITH 7.6 LESSON PRACTICE QUESTIONS 7 & 8
def mystery(a = 2, b = 1, c = 3): return 2 * a + b + 3 * c
What is the output for mystery(1)
What is the output for mystery()?
Explanation:
If we call the function with mystery(1), the value of a is assigned as 1 while the default values of b and c are used. Therefore, the output will be:
2 * a + b + 3 * c
= 2 * 1 + 1 + 3 * 3
= 2 + 1 + 9
= 12
If we call the function with mystery(), all the parameters will take their default values as given in the function definition. Therefore, the output will be:
2 * a + b + 3 * c
= 2 * 2 + 1 + 3 * 3
= 4 + 1 + 9
= 14
Question 2.2 (Coding*) [20 points] Train a Multinomial Naive Bayes model on the training set and evaluate your model on the test set given. Find and report the accuracy and the confusion matrix for the test set as well as how many wrong predictions were made. In estimating the model parameters use the above estimator functions. If it arises in your code, define log 0 as it is, that is -inf. In case of ties, you should predict "0". Hint: To simulate the behavior of the number '-inf', you can assign an arbitrarily small number to this value (like -10¹2), to handle overflow issues. If you make such an assumption, indicate it in your report.
On the training set, develop a Multinomial Naive Bayes model, and assess it on the test set. Declare the accuracy, the confusion matrix, and the total number of inaccurate forecasts. Define log 0 as -inf and forecast "0" in the event of a tie. Assign an arbitrary small number (like -1012) to deal with overflow problems.
What is the naïve Bayes algorithm's formula?A sound method for calculating the conditional chance is provided by the Bayes Theorem. The Bayes Theorem computation can be expressed in the following manner: P(A|B) equals P(B|A)*P(A)/P(B)
When is multinomial Naive Bayes appropriate?With discrete characteristics, the multinomial Naive Bayes classifier is appropriate. (e.g., word counts for text classification). Typically, integer feature values are required by the multinomial distribution.
To know more about Naive Bayes visit:
https://brainly.com/question/30907994
#SPJ9
6. Explain the steps that should be taken to delete a section break. (3)
If you added section breaks to your manuscript, formatting marks make it simple to determine where they start and end. Choose Display all nonprinting characters under Home by going to Home. Press Delete after choosing the section break.
What kinds of characters are not printable examples?Characters used in word processors for designing information that are not printed out are known as non-printing characters or formatting marks. On the monitor, they can also alter how things are displayed. Pilcrow, space, non-breaking space, tab character, etc. are among the most popular non-printable characters in word processors.Carriage return, form feed, line feed, backspace, escape, horizontal tab, and vertical tab are some of the most used non-printable symbols.The display of these unique characters makes it simpler to comprehend the spacing and structure in your work. For instance, it is obvious when you have added an extra carriage return or two spaces between words.To learn more about nonprinting characters, refer to:
https://brainly.com/question/9015633
Which of the following are easy/difficult to handle in Virtual-Circuit and Datagram subnets, and why?
i) Router memory space
ii)Quality-of-service
iii) Congestion control
iv) Address parsing time
Read in a 3-character string from input into variable passCode. Declare a boolean variable containsAlpha and set containsAlpha to true if passCode contains an alphabetic character. Otherwise, set containsAlpha to false.
Ex: If the input is 4cx, then the output is:
Valid passcode
in c++
Here's the C++ code to accomplish the task:
#include <iostream>
#include <cstring>
#include <cctype>
using namespace std;
int main() {
char passCode[4];
bool containsAlpha = false;
cout << "Enter a 3-character passcode: ";
cin >> passCode;
for (int i = 0; i < strlen(passCode); i++) {
if (isalpha(passCode[i])) {
containsAlpha = true;
break;
}
}
if (containsAlpha) {
cout << "Valid passcode\n";
} else {
cout << "Invalid passcode\n";
}
return 0;
}
How to explain the programIn this code, we first declare the passCode variable as a character array of size 4 to accommodate the 3-character passcode plus the null terminator. We also declare the containsAlpha boolean variable and initialize it to false.
We then prompt the user to enter a 3-character passcode and read it into the passCode variable using the cin function.
Next, we loop through the characters in passCode using a for loop and use the isalpha function from the cctype library to check if the current character is alphabetic. If it is, we set containsAlpha to true and break out of the loop.
Finally, we use an if-else statement to check the value of containsAlpha and output either "Valid passcode" or "Invalid passcode" accordingly.
Learn more about program on:
https://brainly.com/question/1538272
#SPJ1
Careers in the Information Support and Services pathway did not exist until: between 2000 and 2005. after the 1960s. the early 1990s. the development of social media apps.
Answer:
Explanation:
This statement is not entirely accurate. Careers in the Information Support and Services pathway have existed well before the 2000s or the development of social media apps. This career pathway includes roles related to information technology (IT), computer systems, and technical support services, which have been in existence since the advent of computers and technology in the workplace. In fact, the IT industry dates back to the mid-20th century, and technical support services have been around for decades as well. While the specific job titles and roles within this pathway may have evolved and expanded over time, the general career pathway has been in existence for many years.
What is the reason for encrypting a mobile device's hard drive? [Choose all that apply]
Prevent unauthorized access to the data on the device
Prevent the access to the location of the device when lost or stolen
Prevent the device's hard drive from being accessed when lost or stolen
Prevent the device from being unlocked with a password or PIN
The reasons for encrypting a mobile device's hard drive are:
Prevent unauthorized access to the data on the devicePrevent the device's hard drive from being accessed when lost or stolenWhat is the reason for encrypting a mobile device's hard drive?Encrypting a mobile device's hard drive ensures that the data on the device is protected in case the device falls into the wrong hands.
If the device is lost or stolen, encryption makes it much harder for someone to access the data stored on the device.
Without the encryption key, the data on the device is effectively useless to anyone who does not have authorized access.
So the correct options are 1 and 3. Prevent unauthorized access to the data on the device, and Prevent the device's hard drive from being accessed when lost or stolen
Learn more about encrypting:
https://brainly.com/question/20709892
#SPJ1
You have been asked to put together a training session for new users of the School database. What items would you want to make sure that you cover in your training session?
New users of the School database should get training in navigation, data entry, data retrieval, security, and database introduction.
What constitutes a training activity's five components?Fortunately for you, whether at the gym or elsewhere, there are five fundamental components that you may concentrate on to achieve your wellness goals: cardiovascular fitness, strength training, core exercises, flexibility, and stretching. The majority of fitness training programmes are built around aerobic fitness, generally known as cardio.
What portion of training is the most crucial?Any effective training program's main objective is to help participants learn new techniques and procedures. Instead of focusing on each and every aspect of an employee's job, we've found that the best training plan examples pinpoint the fundamental duties of each position.
To know more about database visit:-
https://brainly.com/question/30634903
#SPJ1
Implement the RC4 stream cipher in C++. User should be able to enter any key that is 5 bytes to 32 bytes
long. Be sure to discard the first 3072 bytes of the pseudo random numbers. THE KEY OR THE INPUT
TEXT MUST NOT BE HARD CODED IN THE PROGRAM.
Test your program with the following plain text:
https://uhdowntownmy.sharepoint.com/:t:/g/personal/yuans_uhd_edu/EUUKjk0iYzNOgyktdmRzErABOqsOfCYSFQ3VBwMk2
njKlQ?e=TpiLt3
You should write two programs: encryption and decryption. The encryption program should input the
plaintext file and output a cipher text in hex. The decryption program should input the cipher text file in
hex and output the plaintext.
Submit the following:
1. Source code of the encryption program.
2. A screen shot showing the encryption with a 5 byte key.
3. The cipher text from the encryption, saved in hexadecimal (you may want to use the “hex”
output manipulator)
4. Source code of the decryption program.
5. A screen shot showing the decryption of the cipher text with the same 5 byte key.
6. The plaintext from the decryption of the cipher text (you need to convert hex text to number)
Put everything in one PDF or WORD file. Do not zip
RC4 is a symmetric key stream cipher that is widely used for secure communication over the internet. It operates on bytes of data and generates a stream of pseudo-random bytes that are XORed with the plaintext to produce the ciphertext.
What is the program about?The RC4 algorithm consists of two parts: key setup and encryption/decryption.
Key setup:
Initialize the S-box with a permutation of the values 0 to 255, based on the key.Use the S-box to generate a pseudo-random stream of bytes called the keystream.Encryption/decryption:
XOR each byte of the plaintext with the corresponding byte of the keystream to produce the ciphertext.To decrypt the ciphertext, repeat the XOR operation using the same keystream.To implement RC4 in C++, you would need to write code to perform the following steps:
Read the key and plaintext/ciphertext from a file or user input.Perform key setup to generate the keystream.XOR the plaintext/ciphertext with the keystream to produce the ciphertext/plaintext.Write the ciphertext/plaintext to a file or output it to the console.Therefore, below are some general guidelines on how to implement RC4 in C++:
Declare arrays to store the key, plaintext/ciphertext, S-box, and keystream.Read the key and plaintext/ciphertext from a file or user input and store them in the appropriate arrays.Initialize the S-box with a permutation of the values 0 to 255 based on the key.Use the S-box to generate the keystream by iterating over the plaintext/ciphertext and XORing each byte with a pseudo-random value from the S-box.Write the ciphertext/plaintext to a file or output it to the console.Read more about program here:
https://brainly.com/question/23275071
#SPJ1
I doubt anyone has the answer to this but say for instance that I made a side-email and used the side email as a recovery for a private email but the side email has already been put into a school computer. Do y’all think people could see the history of my private email or no?
Btw, I changed the recovery email for my private account but even with the side-email being used to begin with has me real paranoid.
Answer:
if you are using your school email account on your own computer and home network, it is unlikely that your school can see or track your search history or web activity. However, if you are using your school email account on a school computer or network, they may be able to monitor your activity through a proxy or firewall.
Explanation:
schools may have access to your email traffic and usage if you use their email account, regardless of the device or network you use. They may have an Acceptable Use Policy that allows them to monitor your email for security or network management reasons.
Therefore, it is advisable to refrain from using your school email account as a profile on your web browser or for logging into other websites. You may want to use your personal email account as your default profile on your computer and browser.
you should always check with your school for their specific policies and practices regarding email and internet privacy.
Help , I need help with this question
The tag that has been discontinued in HTML5 is A. <basetext.
How to explain the informationThe <basefont> tag has been discontinued in HTML5. This tag was used to specify the base font size, face, and color for a web page.
In HTML5, it is recommended to use CSS to define the font styles instead of using deprecated font tags such as <basefont>. The <basetext> tag and <selects> tags are not valid HTML tags. However, the <textarea> tag is still a valid HTML tag in HTML5 and is used to create a multi-line text input field.
Learn more about html on
https://brainly.com/question/22241341
#SPJ1
I downloaded 3 games from Ytorrent and none of them have sound effects. What should I do?
Use VLC player, which typically supports all formats, or download the appropriate codec.
What is sound effects?An artificially produced or enhanced sound, or sound process, is known as a sound effect and is used to highlight artistic or other material in movies, television programs, live performances, animation, video games, music, or other forms of media.
They were traditionally produced with foley in the 20th century.
Hardware or software tools called audio effects can alter the sound of an audio signal. Rate, feedback, and drive are just a few of the many parameters that can be used to influence effects.
Learn more about sound effects here:
https://brainly.com/question/30106391
#SPJ1
Please help with this exercise
The program based on the information that given is illustrated below.
How to depict the program#include <iostream>
using namespace std
int main(){
int arr[5][5];
// sample taking 5 elements
arr[0][0] = 1232;arr[0][1] = 10;arr[0][2] = 23;arr[0][3] = 45;arr[0][4] = 56;
arr[1][0] = 2343;arr[1][1] = 45;arr[1][2] = 43;arr[1][3] = 24;arr[1][4] = 78;
arr[2][0] = 2344;arr[2][1] = 34;arr[2][2] = 45;arr[2][3] = 45;arr[2][4] = 45;
arr[3][0] = 3423;arr[3][1] = 67;arr[3][2] = 6;arr[3][3] = 65;arr[3][4] = 56;
arr[4][0] = 3425;arr[4][1] = 87;arr[4][2] = 46;arr[4][3] = 45;arr[4][4] = 66;
int ch,flag=1,i,j,id,min,max;
// looping for menu
while(flag){
cout<<endl;
cout<<"1 View All Students Records "<<endl;
cout<<"2 View Students Record by ID "<<endl;
cout<<"3 show highest and lowest final scores "<<endl;
cout<<"4 Quit"<<endl;
cin>>ch;
switch(ch){
case 1:
// displaying the all elements from the array
for(i=0;i<5;i++){
for(j=0;j<5;j++){
cout<<arr[i][j]<<"\t";
}
cout<<endl;
}
break;
case 2:
// reading Id from user and searching in array
cout<<"Enter Students ID";
cin>>id;
j=-1;
for(i=0;i<5;i++){
if(arr[i][0]==id)
for(j=0;j<5;j++)
cout<<arr[i][j]<<"\t";
}
// if Id notfound in array showing error message
if(j==-1)
cout<<id<<" ID does exist";
break;
case 3:
// finds min from the final scores
min=arr[0][4];
for(int i=0;i<5;i++)
if(min>arr[i][4])
min = arr[i][4];
// finds the max final scores
max=arr[0][4];
for(int i=0;i<5;i++)
if(max<arr[i][4])
max = arr[i][4];
cout<<"Max Final Score : "<<max;
cout<<"Min Final Score : "<<min;
break;
case 4:
flag = 0;
break;
Learn more about program on:
https://brainly.com/question/26642771
#SPJ1
HELP ASAP
What would a network administer use to control a group of virtual machines?
Hypervisor
Client
Guest
Network
A network administrator would use a hypervisor to control a group of virtual machines.
What is the network administrator ?A hypervisor is a software layer that enables multiple virtual machines to run on a single physical host machine. The hypervisor provides the necessary resources, such as memory and CPU, to each virtual machine and manages the communication between them.
Therefore, The network administrator can use the hypervisor to configure and manage the virtual machines, such as creating and deleting virtual machines, allocating resources, setting up network connectivity, and monitoring performance.
Read more about virtual machines here:
https://brainly.com/question/28322407
#SPJ1
CODING HOMEWORK:
I'm not getting the test case for Acme, Watervliet and Brooklyn. Anyone good at coding could help?
// MichiganCities.cpp - This program prints a message for invalid cities in Michigan.
// Input: Interactive
// Output: Error message or nothing
#include
#include
using namespace std;
int main()
{
// Declare variables
string inCity; // name of city to look up in array
const int NUM_CITIES = 10;
// Initialized array of cities
string citiesInMichigan[] = {"Acme", "Albion", "Detroit", "Watervliet", "Coloma", "Saginaw", "Richland", "Glenn", "Midland", "Brooklyn"};
bool foundIt = false; // Flag variable
int x; // Loop control variable
// Get user input
cout << "Enter name of city: ";
cin >> inCity;
// Write your loop here
for(x=0;x
// Write your test statement here to see if there is
// a match. Set the flag to true if city is found.
if(citiesInMichigan[x] == inCity)
foundIt=true; }
if(!foundIt)
cout<<"Not a city in Michigan."<
// Test to see if city was not found to determine if
// "Not a city in Michigan" message should be printed.
return 0;
} // End of main()
Answer:
// MichiganCities.cpp - This program prints a message for invalid cities in Michigan.
// Input: Interactive
// Output: Error message or nothing
#include <iostream>
#include <string>
using namespace std;
int main()
{
// Declare variables
string inCity; // name of city to look up in array
const int NUM_CITIES = 10;
// Initialized array of cities
string citiesInMichigan[] = {"Acme", "Albion", "Detroit", "Watervliet", "Coloma", "Saginaw", "Richland", "Glenn", "Midland", "Brooklyn"};
bool foundIt = false; // Flag variable
int x; // Loop control variable
// Get user input
cout << "Enter name of city: ";
cin >> inCity;
// Write your loop here
for (x = 0; x < NUM_CITIES; x++) {
// Write your test statement here to see if there is
// a match. Set the flag to true if city is found.
if (citiesInMichigan[x] == inCity) {
foundIt = true;
break;
}
}
if (!foundIt)
cout << "Not a city in Michigan." << endl;
else
cout << "Valid city in Michigan." << endl;
return 0;
} // End of main()
Explanation:
In this version of the code, we added a loop that goes through the citiesInMichigan array and compares each element with the input city using an if statement. If a match is found, the foundIt flag is set to true and the loop is exited using break. Finally, we added an else block to the conditional statement that prints "Valid city in Michigan." if the city is found.
CORPULENT means:
Lean
Gaunt
Emaciated
Obese
CORPULENT means obese, which refers to a person who is excessively overweight or obese.
Why is it important to format your spreadsheets and use conditional formatting?
Answer:
So people can read it and quickly make sense of the data