If you have completely polarized light of intensity 125 W/m2, what will its intensity be after passing through a polarizing filter with its axis at an 89.5° angle to the light's polarization direction?

Answers

Answer 1

Answer:

When we have completely polarized light with intensity I0, and it passes through a polarizing filter with its axis at an angle θ with respect to the light's polarization direction, the new intensity of the light will be:

I = I0*cos^2(θ)

This is called the "Malus' law".

in this case, we have:

I0 =  125 W/m^2

θ = 89.5°

then:

I = (125 W/m^2)*cos^2(89.9°) = 0.00038 W/m^2


Related Questions

Two positive charges are located at x = 0, y = 0.3m and x = 0, y = -.3m respectively. Third point charge q3 = 4.0 μC is located at x = 0.4 m, y = 0.
A) Make a careful sketch of decent size that illustrates all force vectors with directions and magnitudes.
B) What is the resulting vector of the total force on charge q1 exerted by the other two charges using vector algebra?

Answers

Answer:

0.46N

Explanation:

See attached file

An electromagnetic wave is traveling through vacuum in the positive x direction. Its electric field vector is given by E⃗ =E0sin(kx−ωt)j^,where j^ is the unit vector in the y direction.
What is the Poynting vector S⃗ (x,t), that is, the power per unit area associated with the electromagnetic wave described in the problem introduction?

Answers

Given that,

The electric field is given by,

[tex]\vec{E}=E_{0}\sin(kx-\omega t)\hat{j}[/tex]

Suppose, B is the amplitude of magnetic field vector.

We need to find the complete expression for the magnetic field vector of the wave

Using formula of magnetic field

Direction of [tex](\vec{E}\times\vec{B})[/tex] vector is the direction of propagation of the wave .

Direction of magnetic field = [tex]\hat{j}[/tex]

[tex]B=B_{0}\sin(kx-\omega t)\hat{k}[/tex]

We need to calculate the poynting vector

Using formula of poynting

[tex]\vec{S}=\dfrac{E\times B}{\mu_{0}}[/tex]

Put the value into the formula

[tex]\vec{S}=\dfrac{E_{0}\sin(kx-\omega t)\hat{j}\timesB_{0}\sin(kx-\omega t)\hat{k}}{\mu_{0}}[/tex]

[tex]\vec{S}=\dfrac{E_{0}B_{0}}{\mu_{0}}(\sin^2(kx-\omega t))\hat{i}[/tex]

Hence, The poynting vector is [tex]\dfrac{E_{0}B_{0}}{\mu_{0}}(\sin^2(kx-\omega t))\hat{i}[/tex]

The moment of inertia for a rod that rotates about the axis perpendicular to the rod and passing through one end is: . If the axis of rotation passes through the center of the rod, then the moment of inertia is: . Give a physical explanation for this difference in terms of the way the mass of the rod is distributed with respect to the axis in the two cases.

Answers

Answer:

Explanation:

he moment of inertia for a rod that rotates about the axis perpendicular to the rod and passing through one end is:  m L²/ 3  where m is mass and L is length of rod

If the axis of rotation passes through the center of the rod, then the moment of inertia is:   m L² / 12

So for the former case , moment of inertia is higher that that in the later case .

In the former case , the axis is at one extreme end . Hence range of distance of any point on the rod from axis is from zero to L .

In the second case , as axis passes through middle point , this range of distance of any point on the rod from axis is from zero to L / 2 .

Since range of distance from axis is less , moment of inertia too will be less because

Moment of inertia = Σ m r² where r is distance of mass m from axis .

A variable force of 6x−2 pounds moves an object along a straight line when it is x feet from the origin. Calculate the work done in moving the object from x = 1 ft to x = 18 ft. (Round your answer to two decimal places.) ft-lb

Answers

Answer:

931.00ft-lb

Explanation:

Pls see attached file

The work done in moving the object from x = 1 ft to x = 18 ft is 935  ft-lb.

What is work?

Work is the product of the displacement's magnitude and the component of force acting in that direction. It is a scalar quantity having only magnitude and Si unit of work is Joule.

Given that force = 6x - 2 pounds.

So, work done in moving the object from x = 1 ft to x = 18 ft is = [tex]\int\limits^{18}_1 {(6x-2)} \, dx[/tex]

= [ 3x² - 2x]¹⁸₁

= 3(18² - 1² ) - 2(18-1) ft-lb

= 935  ft-lb.

Hence, the work done is  935  ft-lb.

Learn more about work here:

https://brainly.com/question/18094932

#SPJ2

The AC voltage source supplies an rms voltage of 146 V at frequency f. The circuit has R = 110 Ω, XL = 210 Ω, and XC = 110 Ω. At the instant the voltage across the generator is at its maximum value, what is the magnitude of the current in the circuit?

Answers

Answer:

1.03A

Explanation:

For computing the magnitude of the current in the circuit we need to do the following calculations

LCR circuit impedance

[tex]Z = \sqrt{R^2 + (X_L - X_c)^2} \\\\ = \sqrt{110^2 + (210 - 110)^2}[/tex]

= 148.7Ω

Now the phase angle is

[tex]\phi = tan^{-1} (\frac{X_L - X_C}{R}) \\\\ = tan^{-1} (\frac{210 - 110}{110})\\\\ = 42.3^{\circ}[/tex]

Now the rms current flowing in the circuit is

[tex]I_{rms} = \frac{V_{rms}}{Z} \\\\ = \frac{146}{148.7}[/tex]

= 0.98 A

The current flowing in the circuit is

[tex]I = I_{rms}\sqrt{2} \\\\ = (0.98) (1.414)[/tex]

= 1.39 A

And, finally, the current across the generator is

[tex]I'= I cos \phi[/tex]

[tex]= (1.39) cos 42.3^{\circ}[/tex]

= 1.03A

Hence, the magnitude of the circuit current is 1.03A

A spring is attached to the ceiling and pulled 11 cm down from equilibrium and released. The amplitude decreases by 19% each second. The spring oscillates 10 times each second. Find an equation for the distance, D the end of the spring is below equilibrium in terms of seconds, t.

Answers

Answer:

D(t)= 11x2.09t cos( 20pi,t)

Explanation:

Pls attached file

Wiley Coyote has missed the elusive road runner once again. This time, he leaves the edge of the cliff at 52.4 m/s with a purely horizontal initial trajectory. If the canyon is 141 m deep, how far from the base of the cliff does the coyote land

Answers

Answer:

280.86 m

Explanation:

Range is defined as the distance covered in the horizontal direction. In projectile, range is expressed as x = vt where;

x is the range

v is the velocity of the runner

t is the time taken

Before we can get the range though, we need to find the time taken t using the relationship S = ut + 1/2gt²

if u = 0

S = 1/2gt²

2S = gt²

t² = 2S/g

t = √2S/g

t = √2(141)/9.8

t = √282/9.8

t = 5.36secs

The range x = 52.4*5.36

x =280.86 m

Hence, the coyort lies approximately 280.86 m from the base of the cliff

A cylindrical rod 120 mm long and having a diameter of 15 mm is to be deformed using a tensile load of 35,000 N. It must not experience either plastic deformation or a diameter reduction of more than 1.2x10-2 mm. Of the materials listed below, which are possible candidates? Justify your choice(s).
Material Modulus of Elasticity (GPa) Yield Strength (MPa) Poisson's ratio
Titanium alloy 70 250 0.33
Steel alloy 105 850 0.36
Magnesium alloy 205 550 0.27
Aluminium alloy 45 170 0.20

Answers

Answer:

The only suitable candidate is steel.

Explanation:

We are given;

Initial length;L_o = 120 mm = 0.12 m

Diameter;d_o = 15 mm = 0.015 m

Radius;r = 0.015/2 m = 0.0075 m

Applied force;F = 35000 N

Allowable Diameter reduction;Δd = 1.2 x 10^(-2) mm = 0.012 mm

Formula for Poisson’s ratio is;

v = ε_x/ε_z

Where;

ε_x is lateral strain = = Δd/d_o

ε_z is axial strain = σ/E

Thus;

v = (Δd/d_o)/(σ/E)

Making Δd the subject, we have;

Δd = (vσd_o)/E

Where σ is force per unit area

σ = F/A = 35000/πr² = 35000/(π0.0075)² = 198 × 10^(6) Pa

Now, let's find Δd for each of the metals given;

For Titanium alloy, E = 70 GPa = 70 × 10^(9) Pa and Poisson’s ratio (v) = 0.33

Thus;

Δd_ti = (0.33 × 198 × 10^(6) × 0.015)/70 × 10^(9) = 0.000014m = 0.014 mm

Similarly, for steel;

Δd_st = (0.36 × 198 × 10^(6) × 0.015)/(105 × 10^(9)) = 0.0000102 m = 0.0102 mm

For magnesium;

Δd_mn = (0.27 × 198 × 10^(6) × 0.015)/(205 × 10^(9)) = 0.0000039 m = 0.0039 mm

For aluminum;

Δd_al = (0.2 × 198 × 10^(6) × 0.015)/(45 × 10^(9)) = 0.0000132 m = 0.0132 mm

Since they must not experience a diameter reduction of more than 0.012 mm, then the only alloy that has a reduction diameter less than 0.012 is steel which has 0.0102.

Thus,the only possible candidate is stee.

A tennis player swings her 1000 g racket with a speed of 12 m/s. She hits a 60 g tennis ball that was approaching her at a speed of 15 m/s. The ball rebounds at 40 m/s.
A) How fast is her racket moving immediately after the impact? You can ignore the interaction of the racket with her hand for the brief duration of the collision.
_________m/s
B) If the tennis ball and racket are in contact for 7.00, what is the average force that the racket exerts on the ball?
_________N

Answers

The velocity and force are required.

The speed of the racket is 8.7 m/s

The required force is 471.43 N.

[tex]m_1[/tex] = Mass of racket = 1000 g

[tex]m_2[/tex] = Mass of ball = 60 g

[tex]u_1[/tex] = Initial velocity of racket = 12 m/s

[tex]u_2[/tex] = Initial velocity of ball = -15 m/s

[tex]v_1[/tex] = Final velocity of racket

[tex]v_2[/tex] = Final velocity of ball = 40 m/s

[tex]\Delta t[/tex] = Time = 7 ms

The equation of the momentum will be

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2\\\Rightarrow v_1=\dfrac{m_1u_1+m_2u_2-m_2v_2}{m_1}\\\Rightarrow v_1=\dfrac{1\times 12+0.06\times (-15)-0.06\times 40}{1}\\\Rightarrow v_1=8.7\ \text{m/s}[/tex]

Force is given by

[tex]F=m_2\dfrac{v_2-u_2}{\Delta t}\\\Rightarrow F=0.06\times \dfrac{40-(-15)}{7\times 10^{-3}}\\\Rightarrow F=471.43\ \text{N}[/tex]

Learn more:

https://brainly.com/question/19689434?referrer=searchResults

A hot air balloon competition requires a balloonist to drop a ribbon onto a target on the ground. Initially the hot air balloon is 50 meters above the ground and 100 meters from the target. The wind is blowing the balloon at v= 15 meters/sec on a course to travel directly over the target. The ribbon is heavy enough that any effects of the air slowing the vertical velocity of the ribbon are negligible. How long should the balloonist wait to drop the ribbon so that it will hit the target?

Answers

Answer:

The wait time is [tex]t_w = 3.4723 \ s[/tex]

Explanation:

From the question we are told that

    The distance of the hot air balloon above the ground is  [tex]z = 50 \ m[/tex]

    The distance of the hot air  balloon from the target is  [tex]k = 100 \ m[/tex]

    The  speed of the wind is  [tex]v = 15 \ m/s[/tex]

   

Generally the time it will take the balloon to hit the ground  is  

           [tex]t = \sqrt{ \frac{2 * z }{g} }[/tex]

where g is acceleration due to gravity with value [tex]g = 9.8 m/s^2[/tex]

   substituting values  

                  [tex]t = \sqrt{ \frac{2 * 50 }{9.8} }[/tex]

                 [tex]t = 3.194 \ s[/tex]

Now at the velocity the distance it will travel before it hit the ground is mathematically represented as

               [tex]d = v * t[/tex]

   substituting values

              [tex]d = 15 * 3.194[/tex]

             [tex]d = 47.916 \ m[/tex]

Now in order for the balloon to hit the target on the ground it will need to travel b distance on air before the balloonist drops it and this b distance can be evaluated as  

         [tex]b = k - d[/tex]

   substituting values

        [tex]b =100 -47.916[/tex]

         [tex]b = 52.084 \ m[/tex]

Hence the time which the balloonist need to wait before dropping the balloon is mathematically evaluated as

        [tex]t_w = \frac{b}{v}[/tex]

substituting values

       [tex]t_w = \frac{52.084}{15}[/tex]

       [tex]t_w = 3.4723 \ s[/tex]

             

Which is true about a concave mirror? Incident rays that are parallel to the central axis are dispersed but will be perceived as originating from a point on the near side of the mirror.

Answers

Answer:

'Incident rays that are parallel to the central axis are sent through a point on the near side of the mirror'.

Explanation:

The question is incomplete, find the complete question in the comment section.

Concave mirrors is an example of a curved mirror. The outer surface of a concave mirror is always coated. On the concave mirror, we have what is called the central axis or principal axis which is a line cutting through the center of the mirror. The points located on this axis are the Pole, the principal focus and the centre of curvature. The focus point is close to the curved  mirror than the centre of curvature.

During the formation of images, one of the incident rays (rays striking the plane surface) coming from the object and parallel to the principal axis, converges at the focus point after reflection because all incident rays striking the surface are meant to reflect out. All incident light striking the surface all converges at a point on the central axis known as the focus.

Based on the explanation above, it can be concluded that 'Incident rays that are parallel to the central axis are sent through a point on the near side of the mirror'.

if two point charges are separated by 1.5 cm and have charge values of 2.0 and -4.0, respectively, what is the value of the mutual force between them

Answers

Complete question:

if two point charges are separated by 1.5 cm and have charge values of +2.0 and -4.0 μC, respectively, what is the value of the mutual force between them.

Answer:

The mutual force between the two point charges is 319.64 N

Explanation:

Given;

distance between the two point charges, r = 1.5 cm = 1.5 x 10⁻² m

value of the charges, q₁ and q₂ = 2 μC and - μ4 C

Apply Coulomb's law;

[tex]F = \frac{k|q_1||q_2|}{r^2}[/tex]

where;

F is the force of attraction between the two charges

|q₁| and |q₂| are the magnitude of the two charges

r is the distance between the two charges

k is Coulomb's constant = 8.99 x 10⁹ Nm²/C²

[tex]F = \frac{k|q_1||q_2|}{r^2} \\\\F = \frac{8.99*10^9 *4*10^{-6}*2*10^{-6}}{(1.5*10^{-2})^2} \\\\F = 319.64 \ N[/tex]

Therefore, the mutual force between the two point charges is 319.64 N

show that energy dissipated due to motion of a conductor in the magnetic field is due to mechanical energy.

Answers

Answer:

P = BILv = Iε, it shows that the mechanical energy due to the force on the conductor equals the electrical energy dissipated due to the motion of the conductor in the magnetic field and so, energy is conserved.

Explanation:

The force, F on a conductor of length, L in a magnetic field of magnetic field strength, B and current, I flowing through it is given by

F = BIL.

Now, if the conductor has a velocity, v, the energy dissipated by this force is P

P = Fv = BIL × v = BILv.

Now, we know that the induced e.m.f due to the motion of the conductor is given by ε = BLv.

From P above, P = BILv = I(BLv)

substituting ε = BLv into P, we have

P = Iε

Thus, P is the electrical energy dissipated due to the motion of the conductor.

Now since P = BILv = Iε, it shows that the mechanical energy due to the force on the conductor equals the electrical energy dissipated due to the motion of the conductor in the magnetic field and so, energy is conserved.

1.5 kg of air within a piston-cylinder assembly executes a Carnot power cycle with maximum and minimum temperatures of 800 K and 300 K, respectively. The heat transfer from the air during the isothermal compression is 80 kJ. At the end of the isothermal compression, the volume is 0.2 m3. Determine the volume at the beginning of the isothermal compression, in m3. Assume the ideal gas model for air and neglect kinetic and potential energy effects.

Answers

Answer:

Explanation:

Carton cycle consists of four thermodynamic processes . The first is isothermal expansion at higher temperature , then adiabatic expansion which lowers the temperature of gas . The third process is isothermal compression at lower temperature and the last process is adiabatic compression which increases the temperature of the gas to its original temperature .

So the given process of isothermal compression must have been done at the temperature of 300K  , keeping the temperature constant .

Work done on gas at isothermal compression is equal to heat transfer .

work done on gas = 80 x 10³ J

work done on gas = n RT ln v₁ / v₂

n is number of moles v₁ and v₂ are initial and final volume

molecular weight of gas = 28.97 g

1.5 kg = 1500 / 28.97 moles

= 51.77 moles

work done on gas = n RT ln v₁ / v₂

Putting the values in the equation above

80 x 10³ = 51.78 x 8.31 x 300 x ln v₁ / .2

ln v₁ / .2 = .62

v₁ / .2 = 1.8589

v₁ = 0.37 m³

If the magnetic field steadily decreases from BBB to zero during a time interval ttt, what is the magnitude III of the induced current

Answers

Answer:

Using ohms law

The current is found from Ohm's Law.

I = V /R = E /R = Bxy /Rt.

A 22.0 cm diameter loop of wire is initially oriented perpendicular to a 1.5-T magnetic field. The loop is rotated so that its plane is parallel to the field direction in 0.20 s. What is the average induced emf in the loop?

Answers

Answer:

The average induced emf in the loop is 0.3 V

Explanation:

Given:

d = 22 cm

Magnetic field  is  B = 1.5 T

Change in time  Δt = 0.20 sec.

Radius of loop  = r = d/2 = 11 x [tex]10^{-2}[/tex] m

According to the faraday's law,  Induced emf is given by   e = - (ΔФ / Δt)

where Ф = magnetic flux

Ф = BAcos0   (in this occasion, Ф=0)

where area A = pi * r²

note that we have to neglect negative sign due to its lenz law...so

       B * pi * r

e = ----------------

          Δt

       1.5 ( 3.1416) 11 x [tex]10^{-2}[/tex] )²

e =  ------------------------------------

                        0.20

e = 0.3 V

   

Therefore, the average induced emf in the loop is 0.3 V

A millionairess was told in 1992 that she had exactly 15 years to live. However, if she immediately takes off, travels away from the Earth at 0.8 c and then returns at the same speed, the last New Year's Day the doctors expect her to celebrate is:

Answers

Answer:

The expected year is 2017.

Explanation:

Total years that the millionaire to live = 15 years

Travel away from the earth at  = 0.8 c

This is a time dilation problem so if she travels at 0.8 c then her time will pass at slower. Below is the following calculation:

[tex]T = \frac{T_o}{ \sqrt{1-\frac{V^2}{c^2}}} \\T = \frac{15}{ \sqrt{1-\frac{0.8^2}{c^2}}} \\T = 25 years[/tex]

Thus the doctors are expecting to celebrate in the year, 1992 + 25 = 2017

gravity can be described as..?

A. an magnetic force found in nature

B.the force that moves electrical charges

C.the force that repels object with like chargers

D.the force of attraction between two objects

Answers

Answer:

D

Explanation:

Gravity is the force of attraction between two objects.

Each object creates a gravitational field in wich every other object is affected by it.

A spring balance is attached with string to the piece of aluminum in the preceding problem. What reading will the balance register when the metal is submerged

Answers

Its really not as hard as u think as long as you believe yourself uou got this

A solid disk of radius 1.4 cm and mass 430 g is attached by a wire to one of its circular faces. It is twisted through an angle of 10 o and released. If the spring has a torsion constant of 370 N-m/rad, what is the frequency of the motion

Answers

Answer:

    f= 4,186  10²  Hz

Explanation:

El sistema descrito es un pendulo de torsión que oscila con con velocidad angular, que esta dada por

             w = √ k/I

donde ka es constante de torsion de hilo e I es el momento de inercia del disco

El  momento de inercia de indican que giran un eje que pasa                 por enronqueces

           I= ½ M R2  

reduzcamos las cantidades al sistema SI

         R= 1,4 cm = 0,014  m

         M= 430 g = 0,430 kg

substituimos

           w= √ (2 k/M R2)

calculemos  

           w = RA ( 2 370 / (0,430  0,014 2)

           w = 2,963 103 rad/s

la velocidad angular esta relacionada con la frecuencia por

            w =2pi f

            f= w/2π

            f= 2,963 10³/ (2π)

            f= 4,186  10²  Hz

"Neon signs need 12,000 V to operate. If a transformer operates off a 240 V source and has 1000 turns in its primary coil, how may turns must the secondary coil have

Answers

Answer:

50000 turns

Explanation:

Vp / Vs = Np / Ns

240 / 12000 = 1000 / Ns

Ns = 50000 turns

A bug is sitting on the edge of a rotating disk. At what angular velocity will the bug slide off the disk if its radius is 0.241 m, the coefficient of static friction between the bug and disk is 0.321, and the coefficient of kinetic friction is 0.102

Answers

Answer:

ω = 3.61 rad/sec

Explanation:

Firstly, we should know that the bug will not slip if friction can provide sufficient opposing force.

μmg = mv^2/r = mω^2r

Thus;

μg = ω^2r

ω^2 = μg/r

ω = √(μg/r)

ω = √(0.321 * 9.8)/0.241

ω = √(13.05)

= 3.61 rad/sec

what is rotation? a. the orbit of a satelite around a central body b. the motion of two objects around each other c the spinning of an object on its axis d the motion of an object around a central body

Answers

Answer:

C. The spinning of an object on its axis.

Explanation:

The definition of rotation answers this question.

A good way to remember is that when you rotate, you turn, and when you revolve, you move around.

A customs inspector was suspecting that some of the 12 plastic spheres, which were shipped out of the country, had something in them. Each sphere weighted the same and had hard walls everywhere. Inspector thought that it was possible to hide something inside each sphere. He was correct, and was able to use a simple experiment in determining which sphere had diamonds inside. How did he do it?

Answers

Answer:

use a hammer to hit it

Explanation:

if u hit it u will be able to hear the shattered noise

2. In the ice cream making process, after the pasteurization of the base mixture, the syrup should be cooled to 4 °C to avoid the proliferation of pathogenic microorganisms. A new thermometer was attached to the tank; however, it marked a temperature in another unit: Rankine. What should be the value indicated on the thermometer for the process to be carried out under the same conditions?


3. During the class in the laboratory, the manometer coupled to the analysis equipment indicates a vacuum of 638 mmHg. What should be the absolute pressure in kPa and psi, knowing that the local barometric pressure is 101.3 kPa?

Answers

Answer:

2. 500 R

3. 16.3 kPa, 2.36 psi

Explanation:

2. Convert Celsius to Fahrenheit.

1.8 (4°C) + 32 = 39.2°F

Convert Fahrenheit to Rankine

39.2°F + 459.67 = 498.87 R

Rounding to one significant figure, the temperature is 500 R.

3. Absolute pressure = gauge pressure + atmospheric pressure

P = Pg + Pa

First, convert mmHg to kPa (remember that a vacuum is negative gauge pressure).

-638 mmHg × (101.3 kPa / 760 mmHg) = -85.0 kPa

So the absolute pressure is:

P = -85.0 kPa + 101.3 kPa

P = 16.3 kPa

Converting to psi:

P = 16.3 kPa × (14.7 psi / 101.3 kPa)

P = 2.36 psi

To work on your car at night, you use an extension cord to connect your work light to a power outlet near the door. How would the illumination provided by the light be affected by the length of the extension cord

Answers

Answer:

The longer the cord, the lower the illumination

Explanation:

The illumination provided by the light bulb will be reduced as the length of the extension cord increases. This is because the resistance provided by the wire increases with its length.

Long wires have more electrical resistance than shorter ones.

Let us consider this formula:

Resistance =[tex]\frac{\rho L}{A}[/tex]

From this formula, we can see that as the length increases, the resistance to current flow offered by the wire increases also provided the resistivity and cross-sectional area of the wire remain constant. As a result of this, the illumination will drop.

A Huge water tank is 2m above the ground if the water level on it is 4.9m high and a small opening is there at the bottom then the speed of efflux of non viscous water through the opening will be

Answers

Answer:

The speed of efflux of non-viscous water through the opening will be approximately 6.263 meters per second.

Explanation:

Let assume the existence of a line of current between the water tank and the ground and, hence, the absence of heat and work interactions throughout the system. If water is approximately at rest at water tank and at atmospheric pressure ([tex]P_{atm}[/tex]), then speed of efflux of the non-viscous water is modelled after the Bernoulli's Principle:

[tex]P_{1} + \rho\cdot \frac{v_{1}^{2}}{2} + \rho\cdot g \cdot z_{1} = P_{2} + \rho\cdot \frac{v_{2}^{2}}{2} + \rho\cdot g \cdot z_{2}[/tex]

Where:

[tex]P_{1}[/tex], [tex]P_{2}[/tex] - Water total pressures inside the tank and at ground level, measured in pascals.

[tex]\rho[/tex] - Water density, measured in kilograms per cubic meter.

[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Water speeds inside the tank and at the ground level, measured in meters per second.

[tex]z_{1}[/tex], [tex]z_{2}[/tex] - Heights of the tank and ground level, measured in meters.

Given that [tex]P_{1} = P_{2} = P_{atm}[/tex], [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]v_{1} = 0\,\frac{m}{s}[/tex], [tex]z_{1} = 6.9\,m[/tex] and [tex]z_{2} = 4.9\,m[/tex], the expression is reduced to this:

[tex]\left(9.807\,\frac{m}{s^{2}} \right)\cdot (6.9\,m) = \frac{v_{2}^{2}}{2} + \left(9.807\,\frac{m}{s^{2}} \right)\cdot (4.9\,m)[/tex]

And final speed is now calculated after clearing it:

[tex]v_{2} = \sqrt{2\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (6.9\,m-4.9\,m)}[/tex]

[tex]v_{2} \approx 6.263\,\frac{m}{s}[/tex]

The speed of efflux of non-viscous water through the opening will be approximately 6.263 meters per second.

A container is filled with fluid 1, and the apparent depth of the fluid is 9.00 cm. The container is next filled with fluid 2, and the apparent depth of this fluid is 6.86 cm. If the index of refraction of the first fluid is 1.37, what is the index of refraction of the second fluid

Answers

Answer:

The refractive index of fluid 2 is 1.78

Explanation:

Refractive index , n = real depth/apparent depth

For the first fluid, n = 1.37 and apparent depth = 9.00 cm.

The real depth of the container is thus

real depth = n × apparent depth = 1.37 × 9.00 cm = 12.33 cm

To find the refractive index of fluid index of fluid 2, we use the relation  

Refractive index , n = real depth/apparent depth.

Now,the real depth = 12.33 cm and the apparent depth = 6.86 cm.

So, n = 12.33 cm/6.86 cm = 1.78

So the refractive index of fluid 2 is 1.78

Since the same container is used, real depth of fluid 1 is equal to the real depth of fluid 2. The index of refraction of the second fluid is 1.8

Given that a container is filled with fluid 1, and the apparent depth of the fluid is 9.00 cm. The container is next filled with fluid 2, and the apparent depth of this fluid is 6.86 cm. If the index of refraction of the first fluid is 1.37,

Then,

Index of refraction = [tex]\frac{Real depth}{Apparent depth}[/tex]

Real depth = Index of refraction x apparent depth

Since the same container is used, we can make an assumption that;

real depth of fluid 1 = real depth of fluid 2

That is,

1.37 x 9 = n x 6.86

Where n = Index of refraction for the second fluid.

make n the subject of formula

n = 12.33 / 6.86

n = 1.79

Therefore, the index of refraction of the second fluid is 1.8 approximately.

Learn more about refraction here: https://brainly.com/question/10729741

A coil of 160 turns and area 0.20 m2 is placed with its axis parallel to a magnetic field of initial magnitude 0.40 T. The magnetic field changes uniformly from 0.40 T in the +x direction to 0.40 T in the -x direction in 2.0 s. If the resistance of the coil is 16 Ω, at what rate is power generated in the coil?

Answers

Answer:

The rate at which power is generated in the coil is 10.24 Watts

Explanation:

Given;

number of turns of the coil, N = 160

area of the coil, A = 0.2 m²

magnitude of the magnetic field, B = 0.4 T

time for field change = 2 s

resistance of the coil, R =  16 Ω

The induced emf in the coil is calculated as;

emf = dΦ/dt

where;

Φ is magnetic flux = BA

emf = N (BA/dt)

emf = 160 (0.4T x 0.2 m²)/dt

emf = 12.8 V/s

The rate power is generated in the coil is calculated as;

P = V²/ R

P = (12.8²) / 16

P = 10.24 Watts

Therefore, the rate at which power is generated in the coil is 10.24 Watts

In Young's double slit experiment if the maximum intensity of light is Imax​, then the intensity at path difference λ/2 will be

A .Imax​
B .2Imax​​
C .4Imax​​
D. None

Answers

Answer:

Explanation:

When the path difference is half the wave length or λ /2 , destructive interference takes place which results in reduced or zero intensity in case equal intensity waves interfere as in Young's double slit experiment

Hence dark fringe is formed at that place where intensity is zero .

Hence the right option is D

Other Questions
if you horizontally strech the quadratic parent function, f(x)=x^2, by a factor of 4, what is the equation of the new function? HELPPPP I need help finding x a and b pleaseeee A random sample of 64 observations produced a mean value of 86 and standard deviation of 4.5. The 95% confidence interval for the population mean is between:_________. The following question is based on your reading of 1984 by George Orwell.What do Mr. Charrington and O'Brien have in common?a. Both hold high positions within Oceania's c. Each one holds a high rank within hisInner Partyrespective class.b. As Thought Police they frame possible d. Neither one has ever captured a real thoughtrevolutionaries.criminal.Please select the best answer from the choices provided Brainliest for correct awnser! What is the domain of f(x)? Which statement best describes genetic material?A. A single gene contains hundreds of proteins that have the code formaking more genes.B. Chromosomes are sections of DNA that have the codes for aminoacidsC. Genes are made up of chromosomes that are packaged tightly inDNAD. A single gene has the code for the series of amino acids thatmakes a protein. Solve the following rational equation for x.1/4x-3/4=7/x For the linear function (x) = 7x 4, find the range of (x) at x = 2, 0, and 2. If 50 ml of 1.00 M of H2SO4 and 50 ml of 2.0 M KOH are mixed what is the concentration of the resulting solutes? Would any of these genotypes affect your species survival in its natural habitat? Explain why or why not. You are given three pieces of wire that have different shapes (dimensions). You connect each piece of wire separately to a battery. The first piece has a length L and cross-sectional area A. The second is twice as long as the first, but has the same thickness. The third is the same length as the first, but has twice the cross-sectional area. Rank the wires in order of which carries the most current (has the lowest resistance) when connected to batteries with the same voltage difference.A. Most CurrentB. Wire of length L and area 2AC. Wire of length L and area AD. Wire of length 2L and area AE. Least Curren Mariah has had a hard semester, and her grades have suffered. She really needs a good grade in psychology to get off academic probation and stay in school. On the next psychology exam, Mariah is sorely tempted to cheat, but she decides not to. Which of the following pairs of cognitions best reflects the source of any dissonance Mariah might experience while deciding not to cheat? a. "My school life could be over"; "I just gave up a chance to help myself." b. "I'm basically a decent, honest person"; "These exam questions are ambiguous and tricky." c. "I'm a basically an honest person"; "I've never seen any of my friends cheat." d. "So much is riding on this exam"; "I just know that if I try it, I'll get caught." Jan's Bakery is considering a merger with Tina's Cookies. Jan's total operating costs of producing services are $300,000 for a sales volume of $2 million. Tina's total operating costs of producing services are $75,000 for a sales volume of $600,000. If the two firms merge, calculate the total average cost for the merged firm assuming no synergies. Which appeal is the best example of logos?A. Statistics show that the new tax is likely to affect families.B. Most experts agree that exercise is crucial to good health.C. Benjamin Franklin would have opposed all of these rules.D. Motorcycle laws are too loose; they endanger our children. The first entry of the resulting matrix is: Which expression is equivalent to 17s-10+3(25+1)?23s-923s-7115-7115-9 Which is an example of rising action in the metamorphosis Line 'L' is horizontal and passes through (-5,8). Line 'L is vertical and passes through $(4,-1)$. Find the point of intersection of $\ell_1$ and $\ell_2$. An organization's tangible and intangible resources can be a source of competitive advantage, and these resources play an important role in determining an organization's capabilities and competencies.A. TrueB. False Luciana is trying to decide whether to vote for a political candidate. Based on what she has read about him, she has concluded that he is not qualified for the position, but she agrees with his political positions. Also, she trusts him and likes his decisive personality. In fact, she likes him so much that she sent a small donation to his campaign. Luciana's opinion that the candidate is not qualified represents the __________ component of her attitude toward him.