Answer:
(A) Gamma
Explanation:
They are emitted during radioactive decay and have no mass and no electrical charge meaning no change in atomic number or mass number.
Hope it helps :)
Answer:
A. Gamma
Explanation:
Answers Via Educere/Founders Education.
. A 300 kg Blue car is moving rightward at 3 m/s, about to collide with a 100 kg Red car. Adjust the
velocity of the Red car so that the total momentum of the system is 800 kg m/s. (Adjust the velocity
of the Red car so that the sum of the momentum of the Blue car and the momentum of the Red car
equal 800 kg m/s.) What happened?
Answer:
The velocity of the red car is 1 m/s.
Explanation:
Given that,
The mass of blue car, m₁ = 300 kg
The mass of red car, m₂ = 100 kg
The velocity of Blue car, v₁ = 300 kg
The total momentum of the system, p = 800 kg-m/s
The momentum of an object is given by :
p = mv
So,
[tex]m_1v_1+m_2v_2=p[/tex]
Where
v₂ is the velocity of red car. So,
[tex]v_2=\dfrac{p-m_1v_1}{m_2}\\\\v_2=\dfrac{800-300\times 3}{100}\\\\v_2=-1\ m/s[/tex]
So, the velocity of the red car is 1 m/s.
Which of the following statements describes
an exothermic reaction but not an endothermic
reaction?
A. Energy is destroyed during the reaction.
B.
Energy is used to form chemical bonds.
C. Energy is used to break chemical bonds.
D. Energy is released as heat during the reaction.
Answer:
Energy is released as heat during the reaction.
Answer:
D. Energy is released as heat during the reaction.
Explanation:
Nothing. Finished my AP chem test n wanna give some points out
Answer:
Nice
Explanation:
Answer:
thanks girl
Explanation:
Every day, each person in Canada throws out about 2.2 kg of garbage. If the population of Canada is 31 900 000, the total mass of garbage that all Canadians throw out each day is
Answer:
70 180 000 kg
Explanation:
We can solve this problem by multiplying the amount of garbage each Canadian throws out each day (2.2 kg) by the number of Canadians:
2.2 kg/person * 31 900 000 persons = 70 180 000Thus according to this problem, all Canadians throw out 70 180 000 kg of garbage each day.
In a nuclear fission reaction, a freely moving neutron is introduced to a
nuclear fuel, such as uranium-235. What happens next?
O A. A neutron is absorbed by an atom's nucleus.
B. The neutron breaks apart.
O C. Heat is released by the neutron.
D. The nucleus becomes unstable.
The nucleus becomes unstable when a freely moving neutron is introduced to a nuclear fuel.
What is Nuclear fission?This is a reaction in which the nucleus of an atom splits into two or more smaller nuclei.
This reaction produces more neutrons and the nucleus becomes unstable when a freely moving neutron is introduced to a nuclear fuel to form fission fragments.
Read more about Nuclear fission here https://brainly.com/question/3992688
#SP2
The glycerol-3-phosphate shuttle can transport cytosolic NADH equivalents into the mitochondrial matrix (see Fig. 15.11c). In this shuttle, the protons and electrons are donated to FAD, which is reduced to FADH2. These protons and electrons are subsequently donated to coenzyme Q in the electron transport chain. Given that the number of ATP molecules made per NADH and FADH2 oxidation differ by ____? the amount of ATP generated per mole of glucose when the glycerol-3-phosphate shuttle would be ____ instead of 32.
Answer:
The number of ATP molecules made per NADH and FADH2 oxidation differ by 1.
The amount of ATP generated per mole of glucose when the glycerol-3-phosphate shuttle would be 30 instead of 32.
Explanation:
The glycerol-3-phosphate shuttle can transport cytosolic NADH equivalents into the mitochondrial matrix. In this shuttle, the protons and electrons are donated to FAD, which is reduced to FADH2. These protons and electrons are subsequently donated to coenzyme Q in the electron transport chain. Given that the number of ATP molecules made per NADH and FADH2 oxidation differ by 1, the amount of ATP generated per mole of glucose when the glycerol-3-phosphate shuttle would be 30 instead of 32.
FADH2 generates 1.5 ATP per molecule unlike NADH which generates 2.5 ATP per molecule. This is because electron transfer via FADH2 is not coupled to proton pumping unlike electron transfer reactions involving NADH. Thus, two moles of NADH from the oxidation of 2 moles of glyceraldehyde-2-phosophate to two moles of 1,3-bisphosphoglycerate will yield 3 moles of ATP rather than 5 moles when shuttled through the glycerol-3-phosphate shuttle. The glycerol-3-phosphate shuttle of cytosolic NADH shuttling occurs mainly in the brain and skeletal muscles and does not involve membrane transporters.
What are the uses of the metal Magnesium?
Answer:
use of sterile injections for clearanti bodies
Explanation:
Answer:
Hello There!!
Explanation:
They can be used in making products that make it lightweight such as in power tools and luggages.
hope this helps,have a great day!!
~Pinky~
what is the number of moles of water in 100 g of vinegar?
Answer:
The number of moles of water in 100 g of vinegar is 0.47 moles.
Explanation:
The ratio of the elements in a binary ionic compound are based on the element's _______________.
A. oxidation number
B. mass number
C. total number of neutrons
Which temperature would be most appropriate on a hot summer day: 0 Degrees Celsius, 35 Degrees Celsius, or 90 Degrees Celsius?
Which temperature would be most appropriate as a room temperature: -20 Degrees Celsius, 0 Degrees Celsius, or 20 Degrees Celsius?
A block of aluminum has a volume of 15mL and a mass of 45g. In this example what is aluminum's density?
A rectangular block of gold has a mass of 80g. The dimensions of the block are 2cm by 5cm by 4cm. From this information, calculate the density.
Answer:
1. For a hot summer day, 35 degrees Celsius is most appropriate.
2. For room temperature, 20 degrees Celsius is most appropriate.
3. Aluminum's density is found by dividing mass by volume. 45 / 15 = 3 g/mL. The density is 3 g/mL.
4. Volume is found by multiplying length x width x height. 2cm x 5cm x 4cm equals 40 cm. We then divide the mass by volume to find density. 80 / 40 = 2 g/cm³. The density is 2 g/cm³.
should I go ahead and complete the last assignment of the 9th grade? I got a week till I have to turn it in. I can complete it in about an hour. What do yall think?
Answer:
I think you should, after you complete it and turn it in then you have nothing else to worry about! Get it out the way and do it :)
Answer:
Heres my advice. Dont wait exactly until the deadline.
Explanation:
If its the last assignment, be lazy. do what you want! but, if you only have a week to turn it in then do it on the 4th day then turn it in.
what do animals use for energy in food
A. GROWTH
B. REPAIR
C. MOTION
D. PHOTOSYNTHESIS
Which electron configuration represents a transition element?
01s²2s²2p³
01522s22p635²
1s²2s²2p63s²3p64s²3d7
1s22s22p63s23p64s²3d¹04p4
The electronic configuration which represents a transition element is 1s²2s²2p⁶3s²3p⁶4s²3d⁷
What is a transition element?Transition elements are placed between the metallic S-block elements and nonmetallic P-block elements in the periodic table. They are D-block elements and have features similar to both metals and nonmetals, to some extent. This is why they are called transition elements.
One remarkable feature of these elements happens during the addition of electrons to them. Contrary to S and P-block elements, electrons are added to the penultimate shell, not the last shell. These elements often feature partially filled d-orbitals and have multiple oxidation states.
To learn more about transition element click here:
brainly.com/question/2102444
#SPJ1
Two metals (Metal A and Metal B) are both exposed to a laser which emits photons that have a greater energy than the work function of both metals. Metal A has a smaller work function than Metal B. Therefore, The de Broglie wavelength of the electrons produced from metal A will be ____________ those from metal B.
The number of electrons produced from metal A will be ____________ the number produced from metal B.
Answer:
shorter than
equal to
Explanation:
Let us go back to the Einstein photoelectric equation;
KE = E - Wo
Where
KE = kinetic energy of the photoelectron
E = energy of the incident photon
Wo = work function of the metal
But KE = 1/2mv^2
Thus the velocity of the emitted photoelectron is determined by the kinetic energy of the emitted photoelectron.
Since the work function of metal A is smaller than that of metal B, the kinetic energy of photoelectrons emitted from metal A is greater than that of photoelectrons emitted from metal B . Therefore, the velocity of electrons from metal A is greater than those from metal B.
From de Broglie relation;
λ = h/mv
Where;
λ = de Broglie wavelength
h = Plank's constant
m = mass
v = velocity
Metal A producing electrons with greater velocity will lead to a shorter de Broglie wavelength compared to those from metal B.
The number of photoelectrons ejected is determined by the intensity of the photons and not the energy of the incident photons or the work function of the metals. Since the two metals are exposed to the the same laser, equal number of photoelectrons are produced for metals A and B.
What is the first quantum number of the 3p¹ electron in aluminum,
1s²2s²2p63s²3p¹?
A. n=0
B. n = 1
C. n=3
D. n = 2
Quantum number of the 3p¹ electron in aluminum is n=3.
What is the quantum number?Quantum numbers in quantum physics and chemistry explain the values of conserved quantities in a quantum system's dynamics. Quantum numbers are quantities that can be precisely known at the same time as the system's energy and are related to the eigenvalues of operators that commute with the Hamiltonian and their corresponding eigenspaces. A base state of a quantum system is fully described by the specification of all of its quantum numbers, which can theoretically be measured collectively.
The quantization of numerous interesting observable quantities is a crucial component of quantum physics.
This specifically results in quantum numbers, though they may occasionally reach infinity, that take values in discrete sets of integers or half-integers. This sets quantum mechanics apart from conventional mechanics.
Learn more about quantum number here: https://brainly.com/question/5215315
#SPJ1
Classify the following amine as 1º, 2º, 3º or 4°
(primary, secondary, tertiary, quaternary).
(CH3)4N+
A. primary
B. secondary
D. quarternary
C. tertiary
Answer:
D. Quaternary
Explanation:
I'm going to attach a picture that can help you understand how amines are classified!
I'll explain how amines are classified below. You can skip it if you feel that you already understand that!
--------------------------------------------------------------------------------------------------------------
So we know that amines are composed of nitrogen, at least one R group, and hydrogens. The way that we categorize amines as primary, secondary, tertiary, or quarternary is by counting the number of R groups.
Now, how do we identify the R groups?
Well, basically anything that isn't a hydrogen. You will see that the nitrogen in an amine standardly only makes 3 bonds. If all those three bonds are with a hydrogen, then it will be ammonia. If it is a primary amine, then one of those hydrogens will be replaced with another compound (like [tex]CH_{3}[/tex] in this case). This other compound is called an R group. R groups will change based on the amine. A secondary amine will have two hydrogens replaced with groups. A tertiary amine will have all three hydrogens replaced with R groups.
--------------------------------------------------------------------------------------------------------------
Now, by this logic, we can just count the number of R groups in [tex](CH_{3} )_{4} N^{+}[/tex] and we should get our answer! We don't see any hydrogens. That means we can immediately rule out both A. and B.
Well, let's see. It looks like [tex]CH_{3}[/tex] is our R group. The subscript for it is also 4.
But we've used up our 3 bond spots, how is a quaternary amine possible? And that is why you see that your nitrogen has a positive charge in [tex](CH_{3} )_{4} N^{+}[/tex]. Since the nitrogen is bonded with more groups than it usually does, the electrons of nitrogen and therefore the electrical charge will be shared between more compounds and elements, leading to less charge for the nitrogen. This will cause it to have a positive charge. Making your amine an ion will allow for 4 bonds.
That is why even though nitrogen usually only has 3 bonds, we can still classify [tex](CH_{3} )_{4} N^{+}[/tex] as a quaternary amine.
--------------------------------------------------------------------------------------------------------------
The last part got a little lengthy, but I hope I was able to explain this question in-depth! If you had any trouble understanding what I wrote, feel free to leave a comment. I will reply as soon as possible!
10 points
label the variables you used in your equation to solve the last problem (i.e. all Ps, Vs, or Ts).
use these labeled variables to explain, using Charles' Law theory/concept why your chosen answer to the last problem makes sense.
Calculate the new temperature when a 2.0 L of a gas at 220 K is compressed to 1.0 L.
Answer:
Eventually, these individual laws were combined into a single equation—the ideal gas ... We find that temperature and pressure are linearly related, and if the ... then P and T are directly proportional (again, when volume and moles of gas are ... of the variables, and they are more difficult to use in fitting theoretical equations ...
Explanation:
Explain how an incorrect of dietary information on high blood sugar could potentially affect the patient’s
Long-term (months or years) high blood sugar levels can cause irreversible harm to organs such the kidneys, blood vessels, eyes, nerves, and nervous system. Speak with your doctor or the diabetes care team if you frequently have hyperglycemia.
What effects could an extremely high blood sugar level have on us?If left untreated, having excessive blood sugar levels for an extended length of time might lead to major health issues. In addition to raising the risk of heart disease, stroke, kidney illness, vision issues, and nerve issues, hyperglycemia can harm the blood arteries that provide blood to essential organs.
What dietary requirements are impacted by diabetes?A high-fat, high-calorie, and high-cholesterol diet
To know more about high blood sugar visit:-
https://brainly.com/question/29749982
#SPJ1
What's the most unreactive metal?
Answer:
gold and platinum
Explanation:
Very unreactive metals, such as gold and platinum, are found in the Earth's crust as pure metals. These are called native metals.
what is the molar mass of barium hydroxide
Answer:
171.34 g/mol
Explanation:
Ba molar mass = 137.328 g/mol
O molar mass = 15.999 g/mol * 2 = 31.9980 g/mol
H molar mass = 1.008 g/mol * 2 = 2.0160 g/mol
137.328 + 31.9980 + 2.0160 = 171.3420 = 171.34 g/mol
QUESTION 54
What is/are the reactant(s) of the chemical reaction shown?
CH4 (g) + 202 (g) → CO2 (g) + 2H20 (g)
O CH4 only
O 02 only
O CH4 and 02
O CO2 and H20
The process above is not a chemical reaction
Answer:
the answer is C.
Explanation:
CH4 and 02
3.523 x 10^24 molecules of Mg(OH2) will need how many grams of H3PO4 in the reaction below
H=1.01 g/mol
P=30.97 g/mol
O=16.00 g/mol
3 Mg(OH)2 + 2 H3PO4 --------> 1 Mg3 (PO4 )2 + 6 H2O
Answer:
382.2g of H3PO4 are needed
Explanation:
Based on the reaction, 3 moles of Mg(OH)2 react with 2 moles of H3PO4.
To solve this question we must find the moles of Mg(OH)2 using Avogadro's number. Then, using the reaction we can find the moles of H3PO4 and its mass as follows:
Moles Mg(OH)2:
3.523x10²⁴ molecules * (1mol / 6.022x10²³ molecules) = 5.850 moles Mg(OH)2
Moles H3PO4:
5.850 moles Mg(OH)2 * (2 mol H3PO4 / 3 mol Mg(OH)2) = 3.90 moles H3PO4
Mass H3PO4:
Molar mass:
3H = 1.01g/mol*3 = 3.03
P = 30.97g/mol*1 = 30.97
4O = 16.00g/mol*4 = 64.00g/mol
3.03 + 30.97 + 64.00 = 98.00g/mol
3.90 moles H3PO4 * (98.00g / mol) =
382.2g of H3PO4 are needed17. A balloon contains 4.50 X 1022 atoms of helium gas. Calculate the mass of helium in
grams.
Answer:
1.08 grams
Explanation:
first, we need to find the number of moles
we divide 12.1/22.4=0.54 moles
we multiply the number of moles with the molecular mass 0.54x2=1.08g
The mass of the helium will be 0.296 g He.
What is mass?
The quantity of matter in a thing is measured by its mass. Grams (g) or kilograms (kg) are the most common units of mass measurement (kg).The quantity of matter is measured in terms of mass, regardless of where it is in the universe or the gravitational force acting on it.
Calculation of mass of helium:
It is given that, atom of He = 4.50 X [tex]10^{22}[/tex] , mass of He = 4 g.
4.50 X [tex]10^{22}[/tex] atoms He × 1 mole He / 6.02 × [tex]10^{23}[/tex] atom He = 0.0914 mol He.
Now, apply the conversion formula:
Moles He × grams He / 1 mole He = grams He.
Put the value of given data in above formula.
0.0914 mol He × 4 g / 1 mol He = 0.296 g He.
Therefore, the mass of the helium will be 0.296 g He.
To know more about mass click here.
https://brainly.com/question/11622869.
#SPJ2
When guard cells are full, they bulge. This increases the
size of the gap between them and opens the hole in the
leaf.
Guard cell
Water and
oxygen
Carbon
dioxide
Guard cell
Which object is the best model of a guard cell?
Guard cells are the plant cells that are specialized to perform the gaseous exchange in the leaves. It can be best represented by the model of the water balloon.
What are guard cells?Guard cells are the part of the plant leaves and stem that are essential for the control and exchange of the water, oxygen, and carbon dioxide molecules from the cell environment to the surroundings.
It regulates the closing and the opening of the stomata that become curved when open to make a hole in the middle. When water is present inside the cells they swell making the cell look bulgy like the water in a balloon.
Therefore, the water balloon model best explains the guard cells.
Learn more about guard cells here:
https://brainly.com/question/23460800
#SPJ2
Name three different properties you can test before and after a chemical reaction
Answer:
reactivity, flammability, and if they rust
pls i need help with this
Answer:
C
Explanation:
A physical change is one in which no new substance is formed. The moistening of food by saliva is purely a physical change because no new substance is formed in the process.
A chemical change leads to the formation of a new substance. The action of the enzyme converts starch into sugar which means that a new substance is formed. This is a chemical change.
Which statement accurately depicts the mass and volume of a gas according to the kinetic molecular theory?
O Gases have no defined volume but a defined mass.
O Gases have no defined volume and no defined mass.
O Gases have a defined volume but no defined mass.
O Gases have a defined volume and a defined mass.
Answer: The statement, gases have no defined volume but a defined mass accurately depicts the mass and volume of a gas according to the kinetic molecular theory.
Explanation:
According to the kinetic molecular theory there exists constant motion between the particles of gas and perfectly elastic collisions also exist there between these particles.
Some postulates of Kinetic molecular theory are as follows.
1). The exists constant random motion in the particles of a gas.
2). There is negligible combined volume but a definite mass.
3). There exists no force of attraction between the particles of a gas.
4). Collisions which take place are completely elastic in nature.
Thus, we can conclude that the statement, gases have no defined volume but a defined mass accurately depicts the mass and volume of a gas according to the kinetic molecular theory.
The statement that accurately depicts the mass and volume of a gas according to the kinetic molecular theory is that gases have no defined volume but a defined mass.
WHAT IS KINETIC MOLECULAR THEORY?The kinetic molecular theory of gases states constant motion exists between the particles of gas and perfectly elastic collisions also exist there between these particles.
The postulates of the kinetic molecular theory are as follows:
The exists constant random motion in the particles of a gas.There is negligible combined volume but a definite mass.There exists no force of attraction between the particles of a gas.Collisions which take place are completely elastic in nature.Based on these postulates, it can be said that gases have no defined volume but a defined mass.
Learn more about kinetic molecular theory at: https://brainly.com/question/12661826
Need help ASAP 100 points!
How many molecules are in 2.3 moles of Oxygen?
Question 1 options:
2.06 x 1023 molecules
6.02 x 1023 molecules
1.4 x 1023 molecules
3.8 x 1023 molecules
1.4 x 1023 molecules are present in 2.3 moles of oxygen.
How many molecules will be in the 2.3 moles of oxygen?We know that if we multiply the 2.3 moles of oxygen with Avogadro's number which is 6.023 x 1023 then this will give us the number of molecules which is present in the 2.3 moles of oxygen and which is 13.85 x 1023.
Mole is a standard scientific unit for measuring large quantities of very small entities like atoms, molecules, or other specific particles. The mole entitles an extremely large number of units about 6.02214076 × 1023.
So we can conclude that by multiplying Avogadro's number with the 2.3 moles of oxygen then it will give us 1.4 x 1023 molecules.
Learn more about Molecules here: https://brainly.com/question/26044300
#SPJ1
WILL MARK BRAINLIEST!
Stoichiometry DBA
1. 33 grams of Calcium Sulfate reacts with 28 grams of Aluminum Phosphate to form Calcium
phosphate and Aluminum Sulfate
Write balanced equation here -
2. Which of the two reactants will limit the production of Calcium Phosphate. Show work here.
3. How much of the Aluminum Sulfate would be produced? Show work here. 4. 44 grams of Zinc Nitrate reacts with 59 grams of Iron(III) Hydroxide to form Zinc Hydroxide
and Iron(III) Nitrate.
Write balanced equation here -
5. Which of the two reactants will limit the production of Iron(III) Nitrate . Show work here.
6. How much excess reactant will you have left over?
Answer:
Ca3(PO4)2..... the formula for Calcium phosphateif you answer this correctly ill give you brainliest (HINT IT'S NOT D)
Answer: I believe the answer is A - the total growth of the plants.
Explanation: The total growth of the plants depends on the hours of sunlight. So, this would be your dependent variable, while the hours (amount) of sunlight would be your independent variable.
Answer:
A
Explanation:
since that's what's being measured