If 4 moles of a gas are at a pressure of 105. 6 kpa and a volume of 12 liters, what is the temperature of the gas?




I just need the answer not a link please!

The DOE (Department of Energy) likely picked reclaiming the water before it reaches the river as its goal to address environmental concerns and potential health hazards associated with contaminated water.

Water pollution can have significant negative impacts on aquatic life, human health, and the environment as a whole. Reclaiming the water before it reaches the river would prevent the contaminated water from spreading and potentially causing harm to people, animals, and the surrounding ecosystem.

Additionally, the DOE may have a legal responsibility to prevent the release of contaminated water into public waterways under environmental protection laws.

By reclaiming the water, the DOE can fulfill its obligation to protect the environment and public health while also promoting sustainable water use and management practices.

To know more about environmental concerns refer to-

https://brainly.com/question/30008376

#SPJ11

Copper (Cu) is oxidized, and Nitrogen (N) is reduced.

The element that is oxidized or reduced is calculated as follows;

Cu + HNO3 → Cu(NO3)2 + NO + H2O

Oxidation is the loss of electrons, whereas reduction is the gain of electrons.

In the given reaction, copper (Cu) is oxidized as it loses two electrons, going from an oxidation state of 0 to +2 in Cu(NO3)2.

On the other hand, nitrogen in HNO3 undergoes a change in oxidation state from +5 to +2, indicating that it has gained three electrons and hence, is reduced to NO.

Learn more about oxidation reaction here: https://brainly.com/question/6816739

#SPJ1

The maximum amount of sodium chloride that could be formed is 16.3 grams.

To determine the amount of sodium chloride (NaCl) that could potentially be formed, we need to use the concept of limiting reactants and stoichiometry. First, let's balance the equation:

2Na + Cl2 → 2NaCl

Now, we'll convert the masses of sodium (Na) and chlorine (Cl2) to moles:

For sodium: (44.0 g Na) / (22.99 g/mol) = 1.913 mol Na
For chlorine: (10.0 g Cl2) / (70.90 g/mol) = 0.141 mol Cl2

Next, determine the mole ratio:

Mole ratio Na:Cl2 = 1.913 mol Na / 0.141 mol Cl2 = 13.57

Since the balanced equation requires a 2:1 ratio of Na:Cl2, it's evident that Cl2 is the limiting reactant.

Now, we can calculate the moles of NaCl produced:

(0.141 mol Cl2) × (2 mol NaCl / 1 mol Cl2) = 0.282 mol NaCl

Finally, convert moles of NaCl to grams:

(0.282 mol NaCl) × (58.44 g/mol) = 16.48 g NaCl

Therefore, 16.48 grams of sodium chloride could potentially be formed in this reaction.

Know more about limiting reactant here:

https://brainly.com/question/14225536

#SPJ11

The molar mass of lithium sulfate (Li2SO4) is:

Li2SO4 = 2 x Li + 1 x S + 4 x O = 2(6.94 g/mol) + 32.06 g/mol + 4(16.00 g/mol) = 109.94 g/mol

To find the number of moles of lithium sulfate, we need to first find the number of moles of lithium in the sample:

2.94 x 10^23 atoms of Li x (1 mole of Li/6.022 x 10^23 atoms of Li) = 0.488 moles of Li

Since there are two moles of lithium for every one mole of lithium sulfate, the number of moles of lithium sulfate in the sample is:

0.488 moles of Li x (1 mole of Li2SO4/2 moles of Li) = 0.244 moles of Li2SO4

Therefore, the sample contains 0.244 moles of lithium sulfate.

To know more about lithium refer here

https://brainly.com/question/1439744#

#SPJ11

To differentiate between AgCl(s) and PbCl₂(s), we can use a reagent that reacts differently with each compound. One such reagent is a solution of ammonia (NH₃).

When ammonia is added to AgCl(s), it will dissolve the solid and form a colorless, soluble complex ion, [Ag(NH₃)2]+. This is because AgCl is soluble in ammonia due to the formation of the complex ion.

AgCl(s) + 2NH₂(aq) → [Ag(NH₃)2]+(aq) + Cl^-(aq)

On the other hand, when ammonia is added to PbCl₂(s), it will not dissolve the solid, and there will be no observable reaction. This is because PbCl₂ is not soluble in ammonia, and the complex ion does not form.

PbCl₂(s) + 2NH₃(aq) → No observable reaction

Therefore, the addition of ammonia to the test tube containing the white solid will help differentiate between AgCl and PbCl₂.

If the solid is AgCl, it will dissolve in the ammonia solution and form a colorless complex ion, while if the solid is PbCl₂, there will be no observable reaction.

to know more about reagents refer here:

https://brainly.com/question/31228572#

#SPJ11

The formula for calculating the amount of energy required to raise the temperature of a substance is:

q = m * c * ΔT

where q is the amount of energy, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.

We can rearrange this formula to solve for the mass of the metal:

m = q / (c * ΔT)

Substituting the given values, we get:

m = 832 J / (0.466 J/g*C * (71oC - 65oC))

m = 832 J / (0.466 J/g*C * 6oC)

m = 832 J / 2.796 J/g

m = 297.1387678 g

Rounding to five significant figures, the mass of the metal sample is 297.14 g.

To know more about substance refer here

https://brainly.com/question/13320535#

#SPJ11

Limiting reactant in the given condition is Carbon, Moles of CO formed is 2.40 mol and moles of H2 formed is 2.40 mol

To determine the limiting reactant, we need to compare the amount of each reactant to their stoichiometric coefficients in the balanced chemical equation. The balanced equation for the reaction between carbon and steam is:

C (s) + H2O (g) → CO (g) + H2 (g)

The stoichiometric coefficients tell us that 1 mole of carbon reacts with 1 mole of steam to produce 1 mole of carbon monoxide and 1 mole of hydrogen gas.

So, for 2.40 moles of carbon, we need 2.40 moles of steam to react completely. However, we only have 3.10 moles of steam available, which means that steam is in excess and carbon is the limiting reactant.

To find the number of moles of products formed, we use the stoichiometric coefficients. Since carbon is the limiting reactant, we can use its amount to determine the theoretical yield of products.

From the balanced equation, 1 mole of carbon produces 1 mole of CO and 1 mole of H2. Therefore, 2.40 moles of carbon will produce 2.40 moles of CO and 2.40 moles of H2.

So, the answer to the question is:
Limiting reactant: Carbon
Moles of CO formed: 2.40 mol
Moles of H2 formed: 2.40 mol

Know more about Limiting Reactant here:

https://brainly.com/question/14225536

#SPJ11

The molarity of the potassium carbonate solution is 3.29 M, rounded to three significant figures.

From the balanced chemical equation, we can see that the reaction between lead(II) nitrate and potassium carbonate has a 1:1 stoichiometry. This means that the number of moles of lead(II) nitrate and potassium carbonate that react must be equal.

First, we need to calculate the number of moles of lead(II) nitrate present in the 64.4 mL of 2.56 M solution:

moles of [tex]Pb(NO3)2[/tex] = Molarity x Volume (in L)

moles of [tex]Pb(NO3)2[/tex] = 2.56 M x 0.0644 L

moles of [tex]Pb(NO3)2[/tex] = 0.165 M

Since the stoichiometry of the reaction is 1:1, the number of moles of potassium carbonate must also be 0.165 moles. We can use this information to calculate the molarity of the potassium carbonate solution:

moles of [tex]K2CO3[/tex] = Molarity x Volume (in L)

0.165 mol = Molarity x 0.0502 L

Molarity = 0.165 mol / 0.0502 L

Molarity = 3.29 M

Therefore, the molarity of the potassium carbonate solution is 3.29 M, rounded to three significant figures.

To know more about molarity  refer to-

https://brainly.com/question/8732513

#SPJ11

When we place a metal spoon and a wooden spoon of equal masses/size in a boiling pot of water for the same amount of time, the metal spoon would likely be more painful to grab than the wooden spoon. This is because of the differences in their specific heat capacities.

Specific heat capacity is the amount of heat required to raise the temperature of a substance by 1 degree Celsius per unit mass. Metals have a lower specific heat capacity than wood, which means that they require less heat to increase their temperature than wood does.

As a result, the metal spoon would heat up more quickly than the wooden spoon in the boiling water.

Heat flow is the transfer of thermal energy from one object to another due to a temperature difference between them. In this case, heat flows from the boiling water to the spoons. The metal spoon would conduct heat better than the wooden spoon due to its higher thermal conductivity.

This means that the metal spoon would transfer heat more quickly from the boiling water to your hand, making it more painful to grab.

Mass is also a factor to consider as it affects the amount of heat absorbed by the spoons. However, since the spoons have equal masses, mass does not play a significant role in this scenario.

In summary, the metal spoon would likely be more painful to grab because it has a lower specific heat capacity and higher thermal conductivity than the wooden spoon, which causes it to heat up more quickly and transfer heat more efficiently from the boiling water to your hand.

To know more about specific heat capacities, visit:

https://brainly.com/question/29766819#

#SPJ11

197.4 grams of oxygen gas is consumed during the combustion of propane. Using stoichiometry, it is calculated that 88.43 grams of water vapor is produced as a result.

The balanced chemical equation for the combustion of propane is:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

From the equation, we can see that for every mole of propane (C₃H₈) consumed, 4 moles of water (H₂O) are produced.

To solve the problem, we need to first find the number of moles of oxygen (O₂) consumed:

Moles of O₂ = Mass of O₂ / Molar mass of O₂

Molar mass of O₂ = 32 g/mol (from the periodic table)

Moles of O₂ = 197.4 g / 32 g/mol

Moles of O₂ = 6.16875 mol

Since the balanced chemical equation shows that 5 moles of O₂ are required for every mole of C₃H₈, we can find the number of moles of C₃H₈ consumed:

Moles of C₃H₈ = Moles of O₂ / 5

Moles of C₃H₈ = 6.16875 mol / 5

Moles of C₃H₈ = 1.23375 mol

Now, we can find the number of moles of H₂O produced:

Moles of H₂O = Moles of C₃H₈ x 4

Moles of H₂O = 1.23375 mol x 4

Moles of H₂O = 4.935 mol

Finally, we can find the mass of H₂O produced:

Mass of H₂O = Moles of H₂O x Molar mass of H₂O

Molar mass of H₂O = 18 g/mol (from the periodic table)

Mass of H₂O = 4.935 mol x 18 g/mol

Mass of H₂O = 88.43 g

Therefore, 88.43 grams of water vapor is produced as a result of the combustion of propane with 197.4 grams of oxygen gas.

To know more about the combustion refer here :

https://brainly.com/question/31123826#

#SPJ11

Valparaiso and Sydney are both located in different hemispheres and have different climates.

Valparaiso is a coastal city in Chile, located in the southern hemisphere, while Sydney is a coastal city in Australia, located in the southern hemisphere. Valparaiso has a Mediterranean climate, characterized by mild and wet winters, and warm and dry summers. The average temperature in Valparaiso ranges from 11°C to 20°C.

On the other hand, Sydney has a humid subtropical climate, with mild winters and warm summers. The average temperature in Sydney ranges from 9°C to 23°C. Therefore, it can be concluded that Sydney is slightly warmer than Valparaiso throughout the year.

The difference in temperature can be attributed to the geographical location and the climate patterns of these two cities. Sydney is located closer to the equator than Valparaiso, which results in a warmer climate. Additionally, the ocean currents and winds in Sydney also contribute to the warmer temperatures.

In summary, Sydney is warmer than Valparaiso due to its location closer to the equator and its climate patterns. However, both cities have mild climates with comfortable temperatures throughout the year, making them ideal tourist destinations.

To know more about hemispheres, visit:

https://brainly.com/question/13625065#

#SPJ11

Science Inquiry of Lemon Juice:

Scientific Method of Lemon Juice:

The scientific method of lemon juice involves the following steps:

Draw conclusions: Based on the data analysis, draw conclusions about the hypothesis.

Integrating Design Thinking in SIP of Lemon Juice:

The steps in conducting the Science Inquiry Process (SIP) of lemon juice are as follows:

Lastly, Communicate the results of the investigation through a scientific report or presentation.

Read more about Science Inquiry here:

https://brainly.com/question/1828853

#SPJ1

That statement "Heterocyclic aromatic compounds undergo electrophilic aromatic substitution in a similar fashion to that undergone by benzene with the formation of a resonance-stabilized intermediate." is generally true.

Heterocyclic aromatic compounds, like benzene, contain a ring of atoms with alternating double bonds (pi bonds) and exhibit delocalized pi electrons that are responsible for their aromaticity.

Electrophilic aromatic substitution is a common reaction for these types of compounds, where an electrophile is attracted to the electron-rich ring and substitutes for one of the hydrogen atoms.

The resulting intermediate is a resonance-stabilized carbocation, just like in the case of benzene.

However, the reactivity and selectivity of heterocyclic aromatic compounds may differ from that of benzene due to differences in the electronic properties of the heteroatom(s) in the ring and their effect on the ring's electron density.

To know more about Heterocyclic aromatic compounds refer to-

https://brainly.com/question/30492442

#SPJ11

(a) To determine if this can be done, we need to calculate the maximum amount of polysilicon that can be etched while keeping the SiO2 removal below 50 Å.

Let's assume the initial thickness of SiO2 is 1000 Å. Since the selectivity is 30, the maximum amount of polysilicon that can be etched is:

50 Å * (1/30) = 1.67 Å

Now, taking into account the overetch of 10%, the total amount of polysilicon that can be etched is:

1.67 Å / (1-0.1) = 1.85 Å

So, we need to etch a maximum of 1.85 Å of polysilicon.

The total thickness of the polysilicon and SiO2 layers is:

0.35 um + 1000 Å = 1350 Å

To find the required polysilicon uniformity, we can use the following equation:

(1 - uniformity) * 0.35 um = 1.85 Å

Solving for uniformity, we get:

uniformity = 1 - (1.85 Å / 0.35 um) = 0.9947 or 99.47%

So, the required polysilicon uniformity is 99.47%.

(b) To find the maximum polysilicon film thickness, we can use the same approach as above.

Let's assume the initial thickness of SiO2 is 1000 Å. The maximum amount of polysilicon that can be etched is:

50 Å * (1/30) = 1.67 Å

The total thickness of the polysilicon and SiO2 layers cannot be less than:

1000 Å + 50 Å + 1.67 Å = 1051.67 Å

So, the maximum polysilicon film thickness is:

1051.67 Å - 1000 Å = 51.67 Å

Visit here to learn more about polysilicon brainly.com/question/31232203

#SPJ11

Answer:

1.503 x 10^23

Explanation:

your question was how many atoms, so you have to multiply that number which is how many molecules by 8 atoms per molecule of sulphur. So you get 1.503 x 10^23 atoms in 8 grams of sulfur.

hope this helps. please mark me brainliest

Here are the condensed formulas for each alkyl group, with the number of number of carbons:

1. Methyl (1 carbon): CH3-
2. Ethyl (2 carbons): CH3CH2-
3. Propyl (3 carbons): CH3CH2CH2-
4. Butyl (4 carbons): CH3(CH2)3-
5. Pentyl (5 carbons): CH3(CH2)4-
6. Hexyl (6 carbons): CH3(CH2)5-
7. Heptyl (7 carbons): CH3(CH2)6-
8. Octyl (8 carbons): CH3(CH2)7-
9. Nonyl (9 carbons): CH3(CH2)8-
10. Decyl (10 carbons): CH3(CH2)9-
11. Undecyl (11 carbons): CH3(CH2)10-
12. Dodecyl (12 carbons): CH3(CH2)11-

These formulas represent alkyl groups, which are fragments of alkane molecules with one hydrogen atom removed. They can attach to other molecules and form various organic compounds.

Know more about Alkyl Group here:

https://brainly.com/question/30896901

#SPJ11

A 31. 0 mL sample of 0. 624M perchloric acid is titrated with a 0. 258M sodium hydroxide solution. The molarity of H⁺ after the addition of 15.0 mL of NaOH is 0.204 M.

To find the molarity of (H⁺) after the addition of 15.0 mL of NaOH, we first need to calculate the number of moles of NaOH added:

moles of NaOH = Molarity of NaOH x Volume of NaOH

moles of NaOH = 0.258 M x 0.0150 L

moles of NaOH = 0.00387 mol

Since the balanced chemical equation for the reaction between HClO₄ and NaOH is:

HClO₄(aq) + NaOH(aq) → NaClO₄(aq) + H₂O(l)

We can see that one mole of HClO₄ reacts with one mole of NaOH. Therefore, the number of moles of HClO₄ that reacted with the NaOH is also 0.00387 mol.

To calculate the new molarity of H⁺ after the addition of NaOH, we need to use the volume of HClO₄ that remains after the reaction:

Volume of HClO₄ = 31.0 mL - 15.0 mL

Volume of HClO₄ = 16.0 mL = 0.0160 L

Now we can calculate the new molarity of H⁺:

Molarity of H⁺ = moles of HClO₄ / volume of HClO₄

Molarity of H⁺ = 0.00387 mol / 0.0160 L

Molarity of H⁺ = 0.242 M

Therefore, the molarity of (H⁺) after the addition of 15.0 mL of NaOH is 0.242 M.

To know more about the molarity refer here :

https://brainly.com/question/22997914#

#SPJ11

A graduated cylinder is a piece of laboratory equipment used for measuring the volume of liquids, and in this case, it has a capacity of 10 ml.

The gram scale, on the other hand, is a device used for measuring the mass of objects and materials. To begin the experiment, you will need to first measure the mass of the empty graduated cylinder using the gram scale. This will give you a baseline measurement for the weight of the cylinder without any additional substances. You should record this value for future reference.

Next, you will need to fill the graduated cylinder with water up to the 10 ml mark. This can be done by slowly pouring the water into the cylinder until the level reaches the desired volume.

After filling the cylinder with water, you will need to measure the mass of the cylinder and the water together using the gram scale. Subtract the mass of the empty cylinder from the total mass to find the mass of the water.

Finally, you will need to add the six metal paper clips of the same size and material to the cylinder and measure the mass again. This will allow you to determine the difference in mass between the water and the paper clips.

Overall, this experiment demonstrates the use of laboratory equipment to measure the volume and mass of substances, and highlights the importance of accurate measurements in scientific research.

For more about graduated cylinder:

https://brainly.com/question/26173436

#SPJ11

Delta Hfusion is a term used in thermodynamics to refer to the amount of energy that is required to convert a substance from its solid state to its liquid state, or vice versa, at a constant pressure. This energy is typically expressed in terms of Joules per unit mass, such as J/g or kJ/kg.

To calculate the volume of liquid that is frozen, we first need to determine the amount of mass that is required to produce 1 kJ of energy. This can be calculated using the equation:
q = m * Delta Hfusion

where q is the amount of energy produced (in J), m is the mass of the substance being frozen (in kg), and Delta Hfusion is the amount of energy required to freeze the substance (in J/kg). Rearranging this equation to solve for m, we get:

m = q / Delta Hfusion

Substituting the values of q = 1 kJ and Delta Hfusion (which is a known value for the substance being frozen), we can calculate the mass of the substance required to produce 1 kJ of energy. Once we know the mass, we can use the density of the substance to calculate the volume of liquid that is frozen.

For example, let's say we are trying to freeze water to produce 1 kJ of energy. The Delta Hfusion of water is 333.6 kJ/kg. Using the equation above, we can calculate the mass of water required to produce 1 kJ of energy:

m = (1 kJ) / (333.6 kJ/kg) = 0.003 kg
Next, we can use the density of water (which is approximately 1000 kg/m^3) to calculate the volume of water that is frozen:
Volume = mass / density = 0.003 kg / 1000 kg/m^3 = 0.000003 m^3

So, the volume of water that is frozen to produce 1 kJ of energy is approximately 0.000003 cubic meters, or 3 milliliters.In summary, we can use the Delta Hfusion of a substance, along with its density, to calculate the volume of liquid that is frozen to produce a certain amount of energy.

To know more about thermodynamics refer here

https://brainly.com/question/1604031#

#SPJ11

To cause the electrolysis of CaCl2, a minimum voltage of 4.23 volts is needed.

This voltage is required to overcome the energy barrier of the chemical reaction and initiate the dissociation of the CaCl2 compound into its constituent elements, calcium and chlorine ions.

Electrolysis is the process of using an electric current to drive a chemical reaction. In the case of CaCl2, the electrolysis will involve the decomposition of the CaCl2 into its component ions, calcium (Ca2+) and chloride (Cl-) ions. This process requires energy, which can be supplied by an external electric current.

The minimum voltage needed to cause electrolysis can be estimated using the standard reduction potential (E0) of the reaction. For the reduction of Ca2+ to calcium metal, the standard reduction potential is -2.87 volts, and for the oxidation of Cl- to chlorine gas, the standard reduction potential is -1.36 volts.

The overall reaction for the electrolysis of CaCl2 is:

CaCl2 → Ca + Cl2

The standard reduction potential for this reaction can be calculated by adding the standard reduction potential for the reduction of Ca2+ to calcium metal and the standard reduction potential for the oxidation of Cl- to chlorine gas:

E0 = -2.87 V + (-1.36 V) = -4.23 V

This means that a minimum voltage of 4.23 volts would be needed to drive the electrolysis of CaCl2. However, this is only an estimate, and the actual voltage required may be higher due to factors such as the resistance of the electrolyte solution, the efficiency of the electrodes, and other experimental conditions.

To know more about electrochemical cell:

https://brainly.com/question/31435269

#SPJ11

The amplitude of the wave is 1.5 meters.

The amplitude of a wave is defined as the maximum displacement of a particle from its equilibrium position as a wave passes through it. In this case, the given information tells us that the height of the wave is 3 meters. Since the amplitude is half of the height, we can calculate it by dividing 3 meters by 2, which gives us an amplitude of 1.5 meters.

It is important to note that the amplitude of a wave affects its energy and intensity. Waves with higher amplitudes have greater energy and produce louder sounds or brighter light, while waves with lower amplitudes have less energy and produce softer sounds or dimmer light. The amplitude of a wave can also be affected by factors such as the distance traveled, the medium through which the wave is traveling, and the frequency of the wave.

To learn more about amplitude here

https://brainly.com/question/9525052

#SPJ4

The wave’s amplitude is equal to half of this height. The amplitude is 10.

Amplitude is a measure of the magnitude of a waveform or the strength of a signal. It is usually expressed as the peak value of a waveform or signal. It is also commonly referred to as the height of the waveform or signal. Amplitude is measured in decibels (dB) which is a logarithmic unit of measure. Amplitude is an important factor when determining the intensity of a signal or waveform. Higher amplitude signals usually result in louder sounds or higher voltages in electronic circuits. Lower amplitude signals usually result in quieter sounds or lower voltages in electronic circuits.

To learn more about amplitude

https://brainly.com/question/31014522

#SPJ4

The change in entropy (ΔS) of a gas with 10⁵ particles when the volume changes to 50 times its original value is 2.30 kJ.

To calculate the change in entropy, we can use the formula ΔS = Nkln(V2/V1), where N is the number of particles, k is the Boltzmann constant (1.38 x 10⁻² J/K), and V2 and V1 are the final and initial volumes, respectively. In this case, N = 10⁵, V2 = 50V1, and V1 = V1.

Step 1: Substitute the values into the formula:
ΔS = (10⁵)(1.38 x 10⁻²³ J/K)ln(50V1/V1)

Step 2: Simplify the equation by canceling V1 in the ratio:
ΔS = (10⁵)(1.38 x 10⁻²³ J/K)ln(50)

Step 3: Evaluate the natural logarithm of 50:
ΔS = (10⁵)(1.38 x 10⁻²³ J/K)(3.91)

Step 4: Multiply the values together:
ΔS = 5.38 x 10⁻²¹ J

Step 5: Convert joules to kilojoules:
ΔS = 2.30 x 10¹⁸ kJ

Thus, the change in entropy of the gas is 2.30 kJ.

To know more about Boltzmann constant click on below link:

https://brainly.com/question/30639301#

#SPJ11

The total pressure inside the container is 4.00 atm. This is because the total pressure of a gas mixture is equal to the sum of the individual pressures of each gas present. In this case, we have 2.50 atm of N2 gas and 1.50 atm of O2 gas.

When these two values are added together, we get the total pressure of 4.00 atm. This total pressure is also known as the partial pressure of the gas mixture.

The partial pressure of the gas mixture is the sum of the individual partial pressures of each gas present. Since the total pressure of a gas mixture is equal to the sum of the individual pressures of each gas present, the total pressure in the container is 4.00 atm.

Know more about Total pressure here

https://brainly.com/question/30255561#

#SPJ11

The enthalpy change when 2.50 kg of Glauber's salt solidifies is 605.28 kJ.

To calculate the enthalpy change when 2.50 kg of Glauber's salt (sodium sulfate decahydrate, Na2SO4·10H2O) solidifies, you can follow these steps:

1. Convert the mass of Glauber's salt to moles:
2.50 kg = 2500 g
Molar mass of Na2SO4·10H2O = (2×23) + (32) + (4×16) + (10×(2+16)) = 46 + 32 + 64 + 180 = 322 g/mol
Moles of Glauber's salt = 2500 g / 322 g/mol = 7.76 mol

2. Multiply the moles by the energy released per mole:
Energy released = 7.76 mol × 78.0 kJ/mol = 605.28 kJ

The enthalpy change when 2.50 kg of Glauber's salt solidifies is 605.28 kJ.

To learn more about energy, refer below:

https://brainly.com/question/1932868

#SPJ11

The heat evolved when 27.5 g of ammonia gas condenses to a liquid at its boiling point is -37.8 kJ.

First, we need to calculate the amount of heat required for the ammonia gas to condense. The heat of vaporization of ammonia is 23.4 kJ/mol. The molar mass of ammonia is 17.03 g/mol, so we have:

23.4 kJ/mol x (27.5 g / 17.03 g/mol) = 37.8 kJ

This means that 37.8 kJ of heat is required for 27.5 g of ammonia gas to condense. However, since the question asks for the heat evolved, we need to reverse the sign of the answer.

Thus, the amount of heat released as 27.5 grams of gaseous ammonia undergoes condensation at its boiling point is equal to -37.8 kJ.

To know more about boiling point, refer here:

https://brainly.com/question/32031404#

#SPJ11

One property that is similar between a spiderweb and a Kevlar jacket is their tensile strength.

Tensile strength is the ability of a material to resist breaking under tension or stretching.

Spider silk is known to be one of the strongest natural fibers, with a tensile strength comparable to steel. Kevlar is a synthetic polymer that is widely used in body armor, ropes, and other products that require high strength-to-weight ratios.

Kevlar has a tensile strength five times stronger than steel, making it an ideal material for applications where high strength and durability are required.

Both spider silk and Kevlar are known for their remarkable strength, and their ability to withstand tensile forces, making them highly desirable for use in a variety of applications where strength and durability are essential.

To know more about spiderweb refer to-

https://brainly.com/question/18880314

#SPJ11

Answer:

0.08 atm

Explanation:

The pressure change of a gas at constant volume can be determined using the ideal gas law:

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

Since the volume is constant, we can simplify the ideal gas law to:

P = (nRT) / V

The number of moles and the gas constant are constant for a given sample of gas, so we can further simplify to:

P1 / T1 = P2 / T2

Where P1 and T1 are the initial pressure and temperature, and P2 and T2 are the final pressure and temperature.

Plugging in the given values:

P1 = 2.50 atm

T1 = 30.0 + 273.15 = 303.15 K

T2 = 40.0 + 273.15 = 313.15 K

P2 = (P1 * T2) / T1

P2 = (2.50 atm * 313.15 K) / 303.15 K

P2 = 2.58 atm

Therefore, the pressure change when a constant volume of gas at 2.50 atm is heated from 30.0 °C to 40.0 °C is 0.08 atm (2.58 atm - 2.50 atm).

Answer:

Explanation: 0.08

The concentration of the reactant after precisely two days is 4.62 M.

For a zero-order reaction, the rate is independent of the concentration and is given by the expression:

rate = k

where k is the rate constant.

The integrated rate law for a zero-order reaction is:

[A] = -kt + [A]₀

where [A] is the concentration of the reactant at time t, [A]₀ is the initial concentration of the reactant, k is the rate constant, and t is time.

Substituting the given values into the equation, we get:

[A] = -kt + [A]₀

[A] = -0.0119 M/hr * (224 hr) + 5.19 M

[A] = -0.5712 M + 5.19 M

[A] = 4.6188 M

Rounding off to three significant figures and two decimal places, we get the final concentration as 4.62 M.

To know more about rate constant, here

brainly.com/question/30787205

#SPJ4

The dimensions of the pool table with a perimeter of 26 feet and an area of 40 square feet are either 5 feet by 8 feet or 8 feet by 5 feet.

To solve this problem, we need to use some basic geometry formulas. Let's start by using the formula for the perimeter of a rectangle, which is P = 2l + 2w, where l is the length and w is the width.

We know that the perimeter of the pool table is 26 feet, so we can write the equation:

26 = 2l + 2w

Simplifying this equation, we get:

13 = l + w

Next, we can use the formula for the area of a rectangle, which is A = lw, where A is the area.

We know that the area of the pool table is 40 square feet, so we can write the equation:

40 = lw

Now we can use substitution to solve for one of the variables. We can rearrange the perimeter equation to solve for one variable in terms of the other:

l = 13 - w

Then we can substitute this expression for l into the area equation:

40 = (13 - w)w

Expanding this equation, we get:

40 = 13w - w^2

Rearranging and simplifying, we get a quadratic equation:

w^2 - 13w + 40 = 0

We can solve this equation by factoring or using the quadratic formula, which gives us:

w = 5 or w = 8

If w is 5, then l is 8 (using the perimeter equation), and if w is 8, then l is 5. So the dimensions of the pool table are either 5 feet by 8 feet or 8 feet by 5 feet.

In summary, the dimensions of the pool table with a perimeter of 26 feet and an area of 40 square feet are either 5 feet by 8 feet or 8 feet by 5 feet.

To know more about perimeter, visit:

https://brainly.com/question/6465134#

#SPJ11