How many moles are in 1.2 x 10^24 formula units of Li₂SO4? (round your answer to the nearest tenths place)

There are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.

The chemical formula of hydrogen bromide is HBr. A mole is a unit of measurement that expresses the amount of a chemical substance that includes a fixed number of units of that substance. One mole of a substance is equal to the Avogadro number or 6.022 x 10²³ of that substance.In this problem, we need to figure out how many moles are in 6.4 x 10²⁴ molecules of HBr. We'll start by using Avogadro's number to convert the number of molecules to moles.

According to Avogadro's number, 6.022 x 10²³ molecules are in one mole.

Therefore, to figure out how many moles there are in 6.4 x 10²⁴ molecules,

we will use the following formula:

moles = number of molecules ÷ Avogadro's numbermoles = 6.4 x 10²⁴ ÷ (6.022 x 10²³)moles = 1.06 moles

So, there are 1.06 moles in 6.4 x 10²⁴ molecules of HBr.

For more such questions on hydrogen bromide, click on:

https://brainly.com/question/20460954

#SPJ11

The relative abundance of each isotope in the mixture and the isotopic mass of each isotope determines the average atomic mass of an element.

The average masses of the atoms of beryllium and fluorine are found in the attachment.

The average atomic mass of lithium is 6.9418 amu.

The average atomic mass of lithium is obtained from the isotopic mass and relative abundance of the two isotopes of lithium.

Isotopic mass of lithium-6 = 6.015 amu

Isotopic mass of lithium-7 = 7.016 amu

To calculate the average atomic mass, we use the formula:

average atomic mass = [(isotopic mass of isotope 1 x number of atoms of isotope 1) + ( isotopic mass of isotope 2 x number of atoms of isotope 2)] / total number of atoms

Substituting the values:

average atomic mass of lithium = [(6.015 amu x 3) + (7.016 amu x 2)] / 5

average atomic mass = 6.9418 amu

Learn more about the average atomic mass of an element at: brainly.com/question/30587714

#SPJ1

Complete question:

1. What are the factors that affect the average atomic mass of a mixture of isotopes?

2. Beryllium (Be) and Fluorine (F) have only one stable isotope. Use the periodic table to complete the following table of the average atomic mass of one atom, two atoms, and three atoms of the isotopes

4. Lithium has only two stable isotopes. Use the sim to determine the following:

a. Atomic mass of lithium-6 = amu

b. Atomic mass of lithium-7= amu

c. Average atomic mass of a sample containing three lithium-6 atoms and two lithium-7 atoms = amu

Based on the observations provided, the unknown solution contains a Group II cation that forms a precipitate with SO₄²⁻ and CO₃²⁻, but not with S₂⁻ and OH⁻. This action is likely to be Barium (Ba²⁺) or strontium (Sr²⁺).

1. S₂⁻ doesn't form a precipitate, eliminating Hg²⁺ and Cd²⁺.
2. SO₄²⁻ forms a precipitate, indicating the presence of Ba²⁺, Sr₂+, or Pb²⁺.
3. OH⁻ doesn't form a precipitate, eliminating Sr²⁺ and Pb²⁺.
4. CO₃²⁻⁻ forms a precipitate, which confirms the presence of Ba²⁺, Sr²⁺

Group II cations include calcium (Ca²⁺), strontium (Sr²⁺), and barium (Ba²⁺). Among these, both strontium and barium form precipitates with sulfate and carbonate anions, while calcium only forms a precipitate with carbonate anions.

Therefore, based on the observations provided, the unknown solution most likely contains either strontium or barium cations. Without additional information or tests, it is not possible to determine which of these cations is present in the solution.
Learn more on Barium here.https://brainly.com/question/26873446

#SPJ11

Answer:

8 atoms it have but u don't know

For extraction, there should be an option c) lower solute solubility in the second phase.

Extraction is a process in which a solute is separated from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.

In the first phase, the solute has higher solubility, meaning it dissolves more readily.

In the second phase, the solute has lower solubility, meaning it is less likely to dissolve.

In order for extraction to be successful, the solute must be differently soluble in the phases. This ensures that the solute is separated efficiently and effectively.


The process of extraction involves the formation of two liquid phases and the transfer of the solute from one phase to the other. The solute is transferred from the first phase to the second phase, where it is separated from the solution.


To summarize, extraction is a process of separating a solute from a solution or mixture by two immiscible liquid phases. It involves two phases in which the solute has different solubilities.

Therefore, for extraction, it is necessary for the solute to have a lower solubility in the second phase. and hence the correct answer is option c.

To know more about extraction, refer here:

https://brainly.com/question/12910778#

#SPJ11

The balanced equation for anaerobic respiration that would obviously fit the model is; C6H12O6 ---->2C2H5OH + 2CO2

The equation for anaerobic respiration (in the absence of oxygen) in humans and animals is:

Glucose → Lactic Acid + Energy (ATP)

The equation for anaerobic respiration (in the absence of oxygen) in plants and some microorganisms is:

Glucose → Ethanol + Carbon Dioxide + Energy (ATP).

Hence, we can see that this is way that anaerobic respiration occurs.

Learn more about anaerobic respiration:https://brainly.com/question/12605249

#SPJ1

The molality of dichloromethane in this solution is 6.25 m.

The molality of dichloromethane in a solution of dichloromethane and 2-pentanone is calculated using the formula:

molality (m) = moles of solute (mol) / kilograms of solvent (kg)

In this case, the solute is dichloromethane (CH₂Cl₂) and the solvent is 2-pentanone (CH₃COC₃H₇). The mole fraction of dichloromethane is 0.350, so there are 0.350 moles of dichloromethane in one mole of the solution.

To get the mass of solvent, we need to convert the number of its moles to mass by multiplying it with its molar mass. The molar mass of 2-pentanone (CH₃COC₃H₇), is the sum of the atomic weights of each element, which is 86.13 g/mol. One mole of the solution contains 0.350 moles of dichloromethane and 0.650 moles 2-pentanone. Therefore, the mass of 2-pentanone is:

mass = moles x molar mass = 0.650 moles x 86.13 g/mol = 55.9845 g

Solving for the molality, we get:

m = 0.350 moles / (5.9845 g)(1 kg/1000g)

m = 6.25 mol/kg = 6.25 m

Learn more about molality here: https://brainly.com/question/24065939.

#SPJ11

A conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules. This statement is true.

The given statement "a conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules" is true because a conductor is distinguished from an insulator with the same number of atoms by the number of nearly free electrons. A conductor is a substance that easily transmits heat or electricity through it. The reason why conductors do that is that they have free electrons available in their outer shells, so when a voltage is applied to them, the free electrons become excited and start to flow. On the other hand, an insulator is a substance that does not allow electricity or heat to flow through it. Insulators have a high amount of resistance, which means that they do not allow electrical current to pass through them.

The question was incomplete, but most probably your question was:

A conductor is distinguished from an insulator with the same number of atoms by the number of: electrons protons nearly free atoms nearly free electrons molecules (True/False)

Learn more about a conductor at https://brainly.com/question/24154868

#SPJ11

The radius of a barium atom is 2.68 Å.

Barium is a chemical element that is silvery-white in color and can be found in the periodic table with the symbol Ba.

The density of barium is 3.51 g/cm3, and it has a body-centered cubic unit cell that crystallizes.

Determine the length of the edge of the unit cell. Since barium has a body-centered cubic unit cell, the length of the edge of the unit cell:

Edge length = 4r /√3

Where r is the radius of the atom.

The volume of the unit cell using the formula:

Volume of unit cell = Edge length³

The number of atoms present in the unit cell. Since barium has a body-centered cubic unit cell, the number of atoms present in the unit cell :

Number of atoms in the unit cell = 2

The mass of a single atom of barium using the formula:

Mass of a single atom = Density of barium / Avogadro’s number

Where Avogadro’s number is 6.02 × 10²³ atoms/mol.

The radius of a barium atom using the formula:

Radius of barium atom = (3 × volume of unit cell / 4 × π × number of atoms in the unit cell)¹/³

The radius of the barium atom :

Edge length = 2r√3

r = (Edge length) / 2√3

Volume of the unit cell = (Edge length)³

Number of atoms in the unit cell = 2

Mass of a single atom = Density of barium / Avogadro’s number

Radius of barium atom = (3 × volume of unit cell / 4 × π × number of atoms in the unit cell)¹/³

Therefore, the radius of a barium atom is 2.68 Å.

to know more about barium refer here:

https://brainly.com/question/30888146#

#SPJ11

The mass of carbon that will remain after 5730 years is 362.4 grams.

The decay of carbon-14 follows first-order kinetics. The half-life of carbon-14 is 5730 years, which means that in 5730 years, half of the initial amount of carbon-14 will decay.

This can be expressed as:

[tex]N = N_0/2^{(t/T)}[/tex]

where:

[tex]N_0[/tex] is the initial amount of carbon

N is the final amount of carbon after t years

T is the half-life of carbon

In this case, we want to find the amount of carbon-14 remaining after one half-life, which is 5730 years. Therefore, we can substitute N0 = 724.8 g, t = 5730 years, and T = 5730 years into the equation:

We can substitute the given values into the formula:

[tex]N = 724.8/2^{(5730/5730)}[/tex]

= 362.4 g

Therefore, after one half-life, 362.4 g of carbon will remain.

To learn more about Half-Life refer: https://brainly.com/question/14220374

#SPJ11

The RF value of eugenol will increase if the mobile phase is changed to 40% ethyl acetate in hexanes.

This is because the polarity of ethyl acetate is higher than that of hexanes, making it a better solvent for the eugenol to dissolve in. Therefore, the RF value will increase as the compound is able to move further up the TLC plate.

To illustrate, when the eugenol is placed on a TLC plate with a mobile phase consisting of 40% ethyl acetate in hexanes, the eugenol will dissolve in the ethyl acetate and migrate towards the top of the plate.

The RF value is the distance that the solvent front has traveled, in relation to the distance traveled by the compound, so it will be higher when the compound has been able to move further up the plate.

In conclusion, the RF value of eugenol will increase when the mobile phase is changed to 40% ethyl acetate in hexanes due to the higher polarity of the ethyl acetate, allowing the compound to move further up the TLC plate.

To know more about RF value refer here:

https://brainly.com/question/31117352#

#SPJ11

Since the percentage yield exceeds 100%, the actual yield obtained exceeds the theoretical value. This can be the result of flawed experiments or insufficient replies.

The limiting reactant in the reaction between 3g of Hydrogen and 29g of Oxygen is hydrogen. Water formation can produce a maximum of 27 g. Five grammes of the reactant are still unreacted.

2Hydrogen + Oxygen → 2Water

moles of Hydrogen = mass / molar mass = 40 g / 2.016 g/mol = 19.84 mol

moles of Water = moles of Hydrogen / 2 = 19.84 mol / 2 = 9.92 mol

The molar mass of water is 18.015 g/mol, so the mass of water produced can be calculated as follows:

mass of Water = moles of Water × molar mass = 9.92 mol × 18.015 g/mol = 178.6 g

Therefore, the theoretical yield of water is 178.6 g.

The percentage yield can be calculated as follows:

% yield = (actual yield / theoretical yield) × 100%

% yield = (234 g / 178.6 g) × 100% = 131%

To know more about percentage yield visit:-

https://brainly.com/question/30579872

#SPJ9

The compound with the highest boiling point is Propanal (a). The boiling point of Propanal is -22.8 °C, Ethanal (b) is -13.4 °C, Butanal (c) is -11.7 °C and Methanal (d) is -11.3 °C.

Assuming that the boiling points of the compounds are actually positive values, we can determine which compound has the highest boiling point based on the given data. Boiling point is influenced by various factors, including molecular weight, molecular structure, and intermolecular forces.

In general, compounds with higher molecular weights tend to have higher boiling points, as they have more massive molecules that require more energy to overcome the intermolecular forces holding them together.

Additionally, compounds with stronger intermolecular forces, such as hydrogen bonding or van der Waals forces, also tend to have higher boiling points.

Based on their molecular formulas, propanal (a), ethanal (b), butanal (c), and methanal (d) are aldehydes with different chain lengths. Propanal has three carbon atoms, ethanal has two carbon atoms, butanal has four carbon atoms, and methanal has one carbon atom.

Assuming that the boiling points provided are corrected to positive values, we can conclude that propanal (a) with a boiling point of -22.8 °C would have the highest boiling point among the compounds listed, as it has the longest carbon chain and would likely exhibit stronger intermolecular forces compared to the other aldehydes with shorter chain lengths.

Ethanal (b) would have the next highest boiling point, followed by butanal (c), and finally methanal (d) with the lowest boiling point among the compounds mentioned.

To know more about boiling point, refer here:

https://brainly.com/question/3441929#

#SPJ11

Taking into account the definition of Avogadro's Number, 4.83×10²⁴ atoms of He are in 32.10 g of He.

The molar mass of substance is a property defined as the amount of mass that a substance contains in one mole.

Avogadro's Number is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole.

Its value is 6.023×10²³ particles per mole.

The molar mass of He is 4 g/mole. You can apply the following rule of three: If by definition of molar mass 4 grams of He are contained in 1 mole of He, 32.10 grams of He are contained in how many moles?

moles= (32.10 grams × 1 mole)÷ 4 grams

moles= 8.025 moles

The amount of moles of He in 32.19 grams is 8.025 moles.

You can apply the following rule of three: If by definition of Avogadro's Number 1 mole of He contains 6.023×10²³ atoms, 8.025 moles of He contains how many atoms?

amount of atoms of He= (8.025 moles × 6.023×10²³ atoms)÷ 1 mole

amount of atoms of He= 4.83×10²⁴ atoms

Finally, 4.83×10²⁴ atoms of He are present.

Learn more about Avogadro's Number:

brainly.com/question/11907018

#SPJ1

The technique used in this investigation is titration.

Titration is a laboratory method used to determine the amount or concentration of a substance in a sample. A reagent, known as the titrant, is added to a solution to react with the substance being studied, known as the analyte. The titration endpoint is determined by observing an indicator's colour change or by performing a calculation.

Titration is a common method used in analytical chemistry for quantifying analytes' concentrations. Acid-base titrations, redox titrations, and complexometric titrations are some of the most common types of titrations used in chemistry labs. Titration is used to calculate the amount of acid, base, salt, or other substance in a sample.

Learn more about titration at:

https://brainly.com/question/13307013

#SPJ11

The purpose of the experiment is to observe the effects of natural selection on the populations of different types of organisms in simulated environments.

2. The independent variable is the type of organism or trait being observed, and the dependent variable is the number or frequency of organisms with that trait after a certain time. The control variables include the initial number of organisms and the duration of the tests.

3. A hypothesis based on observations and scientific principles should be written. For example, if observing the effect of camouflage on moth populations, a hypothesis could be: "Moths with better camouflage will survive and reproduce at a higher rate, leading to an increase in the frequency of the camouflaged trait in the population over time."

4. Experimental Methods: Describe the tools used to collect data. For example, a counting sheet and a calculator.

5. Describe the procedure followed to conduct the experiment, including setting up the simulated environment, releasing the organisms, and recording the number or frequency of organisms with a certain trait over time.

6. Data and Observations: Record observations of the initial number of organisms and the number or frequency of organisms with a certain trait after each test.

7. Create a table to organize the data collected. The table should include the type of organism or trait being observed, the initial number of organisms, and the number or frequency of organisms with that trait after each test.

Conclusions:

Draw conclusions about how natural selection leads to increases and decreases of specific traits in populations over time. Provide an evidence-based claim that is supported by the data collected.

For example, "Organisms with advantageous traits have a better chance of surviving and reproducing, leading to an increase in the frequency of those traits in the population over time."

Make a prediction about what would happen if one of the variables in the experiment was changed. Explain the prediction using a cause-and-effect relationship based on the observations and scientific principles.

For example, "If the simulated environment was changed to have a different type of predator, the frequency of the camouflaged trait may change, as the predator may have different visual sensitivities that make different colors or patterns more or less visible."

learn more about natural selection: https://brainly.com/question/23929271

#SPJ1

The complete part of the question in the picture

Adaptations and Population Changes

It’s time to complete your Lab Report. Save the lab to your computer with the correct unit number, lab name, and your name at the end of the file name (e.g., U2_ Lab_AdaptationsAndPopulationChanges_Alice_Jones.doc).

Introduction

1. What was the purpose of the experiment?

Type your answer here:

2. What were the independent, dependent, and control variables in your investigation? Describe the variables for the simulation with the moths and birch trees.

Type your answer here:

3. Write a hypothesis based on observations and scientific principles.

Experimental Methods

1. What tools did you use to collect your data?

2. Describe the procedure that you followed to conduct your experiment.

Type your answer here:

Data and Observations

1. Record your observations.

Type your answer here:

Table 1. Number of Moths in Birch Tree Simulation

Type of moth (color) Initial number of moths Number of moths after test 1 Number of moths after test 2 Number of moths after test 3

Pink and yellow 5

Blue and white 5

White with black spots 5

Black with white spots 5

Table 2. Number of Moths in Flower Simulation.

Type of moth (color) Initial number of moths Number of moths after test 1 Number of moths after test 2 Number of moths after test 3

Pink and yellow 5

Blue and white 5

White with black spots 5

Black with white spots 5

Conclusions

1. What conclusions can you draw about how natural selection leads to increases and decreases of specific traits in populations over time? Write an evidence-based claim.

Type your answer here:

2. Predict what would happen to the number of each type of moth if the pink flowers were replaced with blue ones. Explain your prediction using a cause-and-effect relationship.

The unknown amine reacted with iodomethane and afforded the following tetraalkylammonium salt.

The structure of the unknown amine is an aliphatic amine. An aliphatic amine is an organic compound with at least one nitrogen atom connected to alkyl groups. It may have single, double, or triple bonds between nitrogen and the carbon atoms of the alkyl group.

Aliphatic amines can be secondary, tertiary, or primary depending on the number of alkyl groups attached to the nitrogen atom.

In the case of the unknown amine, the number of alkyl groups connected to the nitrogen atom is four, meaning that it is a primary aliphatic amine. aliphatic amines have the general formula of RCH2NH2, where R represents a hydrocarbon chain.

To know more about aliphatic amine click on below link:

https://brainly.com/question/24114560#

#SPJ11

Answer:

C5H6

Explanation:

Alcohol formula calculation

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles.

The ratio of carbon to hydrogen in the empirical formula is 1:1.20.

To get whole numbers, we can multiply both numbers by 5.

The empirical formula of the alcohol is C5H6.

Formula used: moles = mass / molar mass

Name of formula: Mole calculation

What to watch: Make sure to use the molar masses of the correct compounds.

To determine the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

First, we can find the number of moles of carbon dioxide produced:

moles of CO2 = mass of CO2 / molar mass of CO2

moles of CO2 = 0.625 g / 44.01 g/mol

moles of CO2 = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H2O = mass of H2O / molar mass of H2O

moles of H2O = 0.307 g / 18.02 g/mol

moles of H2O = 0.0170 mol

The alcohol undergoes complete combustion, so all of the carbon in the alcohol combines with oxygen to form carbon dioxide, and all of the hydrogen in the alcohol combines with oxygen to form water. Therefore, the number of moles of carbon in the alcohol is equal to the number of moles of carbon dioxide produced, and the number of moles of hydrogen in the alcohol is equal to the number of moles of water produced.

moles of C in alcohol = moles of CO2 = 0.0142 mol

moles of H in alcohol = moles of H2O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Therefore, the empirical formula of the alcohol is C5H6.

Alcohol formula calculation.

To determine the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

First, we can find the number of moles of carbon dioxide produced:

moles of CO2 = mass of CO2 / molar mass of CO2

moles of CO2 = 0.625 g / 44.01 g/mol

moles of CO2 = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H2O = mass of H2O / molar mass of H2O

moles of H2O = 0.307 g / 18.02 g/mol

moles of H2O = 0.0170 mol

The alcohol undergoes complete combustion, so all of the carbon in the alcohol combines with oxygen to form carbon dioxide, and all of the hydrogen in the alcohol combines with oxygen to form water. Therefore, the number of moles of carbon in the alcohol is equal to the number of moles of carbon dioxide produced, and the number of moles of hydrogen in the alcohol is equal to the number of moles of water produced.

moles of C in alcohol = moles of CO2 = 0.0142 mol

moles of H in alcohol = moles of H2O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Therefore, the empirical formula of the alcohol is C5H6.

Alcohol formula calculation.

To determine the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

First, we can find the number of moles of carbon dioxide produced:

moles of CO2 = mass of CO2 / molar mass of CO2

moles of CO2 = 0.625 g / 44.01 g/mol

moles of CO2 = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H2O = mass of H2O / molar mass of H2O

moles of H2O = 0.307 g / 18.02 g/mol

moles of H2O = 0.0170 mol

The alcohol undergoes complete combustion, so all of the carbon in the alcohol combines with oxygen to form carbon dioxide, and all of the hydrogen in the alcohol combines with oxygen to form water. Therefore, the number of moles of carbon in the alcohol is equal to the number of moles of carbon dioxide produced, and the number of moles of hydrogen in the alcohol is equal to the number of moles of water produced.

moles of C in alcohol = moles of CO2 = 0.0142 mol

moles of H in alcohol = moles of H2O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Therefore, the empirical formula of the alcohol is C5H6.

ChatGPT

The molecular formula of a compound is the whole number multiple of its empirical formula. The empirical formula is the simplest formula. Here the empirical formula of the alcohol is C₅H₆.

The empirical formula of a compound is defined as the formula which gives the simplest whole number ratio of atoms of various elements present in one molecule of the compound.

In order to find out the empirical formula of the alcohol, we need to find the mole ratios of the elements in the compound.

moles of CO₂ = mass of CO₂ / molar mass of CO₂

moles of CO₂ = 0.625 g / 44.01 g/mol

moles of CO₂ = 0.0142 mol

Next, we can find the number of moles of water produced:

moles of H₂O = mass of H₂O / molar mass of H₂O

moles of H₂O = 0.307 g / 18.02 g/mol

moles of H₂O = 0.0170 mol

To find the empirical formula, we need to divide the number of moles of each element by the smallest number of moles:

C: 0.0142 mol / 0.0142 mol = 1

H: 0.0170 mol / 0.0142 mol = 1.20

The ratio of carbon to hydrogen in the empirical formula is 1:1.20. We can multiply both numbers by 5 to get whole numbers:

C: 1 × 5 = 5

H: 1.20 × 5 = 6

Thus the empirical formula of the compound is C₅H₆.

To know more about empirical formula, visit;

https://brainly.com/question/14044066

#SPJ2

The molar mass of the unknown monoprotic organic acid is 180.0 g/mol. by titration. If 6.12 ml of the naoH solution is required to neutralize the sample.

In order to determine the molar mass of the unknown monoprotic organic acid, follow the steps given below:

Step 1:

Calculate the number of moles of NaOH used in the titration by using the formula given below:

n(NaOH) = M(NaOH) × V(NaOH)

= 0.157 mol/L × 0.00612 L

= 9.62 × 10^-4 mol

Step 2:

Calculate the number of moles of the acid used in the titration by using the formula given below:

n(acid) = n(NaOH)

= 9.62 × 10^-4 mol

Step 3:

Calculate the mass of the acid used in the titration by using the formula given below:

mass(acid) = n(acid) × M(acid) = 0.173 gM(acid) = mass(acid) / n(acid)

= 0.173 g / 9.62 × 10^-4 mol

= 180.0 g/mol

Therefore, the molar mass of the unknown monoprotic organic acid is 180.0 g/mol.

For more such questions on molar mass , Visit:

https://brainly.com/question/21334167

#SPJ11

If the temperature of the gas is reduced from 91°C to 0°C at constant pressure, the volume of the gas will decrease from 91 ml to 68.5 ml.

A gas has a volume of 91 ml at a temperature of 91°C. Use the combined gas law, which is a variation of the ideal gas law that holds pressure constant while allowing for changes in volume and temperature.

V1/T1 = V2/T2P = constant

Where V1 is the initial volume of the gas, T1 is the initial temperature of the gas, V2 is the final volume of the gas, T2 is the final temperature of the gas, and P is the constant pressure that the gas is held at.

We'll begin by plugging in the values that we know. V1 = 91 ml, T1 = 91°C, P = constant, V2 = ?, T2 = 0°C.

We can simplify the temperature values by converting them to Kelvin, since Kelvin is the temperature scale that is used in the gas laws. To convert Celsius to Kelvin, we simply add 273 to the Celsius value.

T1 = 91°C + 273 = 364 KT2 = 0°C + 273 = 273 KNow we can plug in the values and solve for V2. V1/T1 = V2/T2(91 ml)/(364 K) = V2/(273 K)Simplifying this equation, we get:V2 = (91 ml)(273 K)/(364 K)V2 = 68.5 ml

to know more about temperature refer here:

https://brainly.com/question/15267055#

#SPJ11

1.63atm is the required pressure of the given gas.

To calculate the pressure of gas using the ideal gas law, we need to use the formula:

PV = nRT

where:

First, we need to calculate the number of moles of CO2 using the given mass and molar mass:

n = m/M

where:

m = mass of CO2 = 2.89 g

M = molar mass of CO2 = 44.01 g/mol

n = 2.89 g / 44.01 g/mol = 0.0657 mol

Next, we can plug in the values into the ideal gas law and solve for pressure (P):

PV = nRT

P = nRT / V

P = (0.0657 mol) (0.08206 L·atm/mol·K) (255.22 K) / 9.60 L

P = 1.63 atm

Therefore, the pressure of the gas is 1.63 atm.

Learn more on ideal gas law here:https://brainly.com/question/25290815

#SPJ1

Answer: The new volume of gas in the piston is 77.59 ml.

Given,Initial volume of gas in the piston = 225.0 ml Initial pressure of gas in the piston = 1.00 atmM Final pressure of gas in the piston = 2.90 atm. We have to find out the new volume of gas in the piston. Assuming that the moles of gas and temperature are held constant, we can use Boyle's Law to solve this problem.

Boyle's Law states that for a given amount of gas kept at a constant temperature, the volume of the gas is inversely proportional to its pressure. Mathematically, it can be represented as P1V1 = P2V2 where,P1 is the initial pressure of gasV1 is the initial volume of gas P2 is the final pressure of gas V2 is the final volume of gas

Let's substitute the given values in the above equation. P1V1 = P2V2225.0 × 1.00 = 2.90 × V2V2 = (225.0 × 1.00)/2.90V2 = 77.59 ml

Know more about Boyle's Law here:

https://brainly.com/question/30367067

#SPJ11

The addition of low ionic strength solution (LISS) to the testing environment when performing an indirect antiglobulin test is designed to enhance the speed and sensitivity of the test.

The LISS solution reduces the time required for the agglutination reaction to occur between the patient's red blood cells (RBCs) and antiglobulin reagent (Coombs reagent).This reagent is an anti-human globulin (AHG) that attaches itself to the antibodies present on the RBCs' surface. The test is an indirect antiglobulin test, which involves incubating the patient's RBCs with a known anti-human globulin. The LISS solution's addition to the testing environment increases the speed and sensitivity of the test. It also helps in reducing the reaction time and helps detect antibodies that are present in low concentrations.

The LISS solution enhances the sensitivity of the antiglobulin test by reducing the ionic strength of the testing environment. This solution neutralizes the ionic charges on the surface of the RBCs, allowing the AHG to attach itself to the RBCs' antigens more efficiently. This, in turn, promotes more efficient agglutination and quicker antibody detection during the indirect antiglobulin test.

Learn more about antiglobulin test at:

https://brainly.com/question/30707881

#SPJ11

The mass percent of carbon in decane, C{10}H{22}, is 12.11%.

This can be determined by using the atomic mass of each element. Carbon has an atomic mass of 12.01 and Hydrogen has an atomic mass of 1.008.

When calculating the mass percent, you must first determine the total molar mass of the compound.

The total molar mass of decane is calculated by multiplying the atomic mass of each element by the number of atoms of that element in the molecule.

For example, the total molar mass of decane is calculated by multiplying 12.01 (atomic mass of carbon) by 10 (the number of carbon atoms) and 1.008 (atomic mass of hydrogen) by 22 (the number of hydrogen atoms).

This yields a total molar mass of 142.256.

The mass percent of carbon can be determined by dividing the total molar mass of carbon by the total molar mass of decane and then multiplying by 100.

This is calculated by dividing 12.01 (atomic mass of carbon) by 142.256 (total molar mass of decane) and then multiplying by 100, which yields a mass percent of 12.11%.

The mass percent of carbon in decane, C{10}H{22}, is 12.11%.

This was determined by calculating the total molar mass of decane, which is 142.256, and then dividing the total molar mass of carbon by the total molar mass of decane and then multiplying by 100.

to know more about decane refer here:

https://brainly.com/question/28585062#

#SPJ11

Yes, it is true that the electronic configuration of O2- is 1s2 2s2 2p6.

Arrangement of electrons in orbitals around atomic nucleus is called electronic configuration and describes how electrons are distributed in its atomic orbitals.

When oxygen atom gains two electrons to form an O2- ion, the two electrons occupy the lowest energy level available, which is the 2s orbital. Therefore, the electronic configuration of O2- is the same as that of neon (1s2 2s2 2p6), which has a full outermost shell of electrons. This noble gas configuration makes the O2- ion stable and less likely to react with other elements.

To know more about electronic configuration, refer

https://brainly.com/question/26084288

#SPJ1

The term is used to describe the electrons present in the outermost energy level is the valence electrons.

The number of the electrons in the outermost shell of the particular atom that determines its reactivity, or the tendency to form the chemical bonds with the other atoms. This is the outermost shell and is known as  valence shell, and the electrons present in it are called the valence electrons.

The electrons are on the outermost energy level of the atom are called the valence electrons. These are the electrons that involved in the bonding and the chemical reactions. The other electrons are the  core electrons.

To learn more about electrons here

https://brainly.com/question/31179419

#SPJ4

The number of moles of solute is 0.264 moles.

The concentration of a solution can be determined by calculating the number of moles of solute present in a given volume. The concentration of a glucose solution given is 0.750 m, which means that there are 0.750 moles of glucose present in 1 liter of the solution.

To calculate the number of moles of solute present in 352 ml of this solution, we must first convert 352 ml to liters. This is done by dividing 352 by 1000, giving 0.352 liters.

To calculate the number of moles of glucose in this volume of solution, we must multiply 0.750 moles by 0.352 liters, giving 0.264 moles.

This means that in a volume of 352 ml of a solution with a concentration of 0.750 m, there are 0.264 moles of glucose present.

Therefore, the number of moles of solute present in a volume of 352 ml of glucose solution is 0.264 moles.

To know more about moles, refer here:

https://brainly.com/question/26416088#

#SPJ11

Answer: The thickness of the foil is 0.0516 mm.

To find this, we can use the formula for finding the volume of a rectangular prism, which is V = l x w x h. We are given the volume (V = 0.645 mm3) and the length (l = 10.0 mm) and width (w = 12.5 mm). Rearranging the formula gives us h = 0.645 mm3 / (10.0 mm x 12.5 mm) = 0.0516 mm.

Therefore, the thickness of the foil is 0.0516 mm. This answer was selected from the group of answer choices provided in the question (0.000 516 mm, 80.6 mm, 0.005 16 mm, 0.0516 mm, and 194 mm).


Learn more about thickness of the foil here:

https://brainly.com/question/13586529#

#SPJ11

cola has a ph of about 3.0. if a cola has a concentration of h2co3 of 0.005m then the concentration of HCO- ions is 1.58 x 10-4 M.

The given information is that a cola has a pH of about 3.0 and its H2CO3 concentration is 0.005M.

We have to determine the concentration of HCO- ions.

Given below is the balanced equation for the dissociation of carbonic acid

(H2CO3):H2CO3 → H+ + HCO- 

pKa = 6.4 The dissociation constant, Ka can be calculated from the pKa as shown below:

Ka = 10(-pKa)Ka = 10(-6.4)Ka = 2.51 x 10-7

Now, we can write the equation for the ionization of H2CO3 as shown below:

H2CO3 + H2O → H3O+ + HCO3- 

Here, the equilibrium constant, Ka can be defined as shown below:

Ka = [H3O+] [HCO3-] / [H2CO3]

Now, we can substitute the equilibrium concentrations in the above equation as shown below:

2.51 x 10-7 = [x] [x] / [0.005 - x]

On solving this equation, we get the value of x as 1.58 x 10-4 M.

Therefore, the concentration of HCO- ions is 1.58 x 10-4 M.

For more such questions on concentration , Visit:

https://brainly.com/question/28564792

#SPJ11