Answer:
[tex]\large \boxed{4.12 \times 10^{23}\text{ formula unis of CaCl}_{2}}$}[/tex]
Explanation:
You must calculate the moles of CaCl₂, then convert to formula units of CaCl₂.
1. Molar mass of CaCl₂
CaCl₂ = 40.08 + 2×35.45 = 40.08 + 70.90 = 110.98 g/mol
2. Moles of CaCl₂ [tex]\text{Moles of CaCl}_{2} = \text{75.9 g CaCl}_{2} \times \dfrac{\text{1 mol CaCl}_{2}}{\text{110.98 g CaCl}_{2}} = \text{0.6839 mol CaCl}_{2}[/tex]
3. Formula units of CaCl₂
[tex]\text{No. of formula units} = \text{0.6839 mol CaCl}_{2} \times \dfrac{6.022 \times 10^{23}\text{ molecules CaCl}_{2}}{\text{1 mol P$_{2}$O}_{5}}\\\\= \mathbf{4.12 \times 10^{23}}\textbf{ formula units CaCl}_{2}\\\text{There are $\large \boxed{\mathbf{4.12 \times 10^{23}}\textbf{ formula units of CaCl}_{2}}$}[/tex]
The half‑equivalence point of a titration occurs half way to the equivalence point, where half of the analyte has reacted to form its conjugate, and the other half still remains unreacted. If 0.480 moles of a monoprotic weak acid (Ka=3.0×10−5) is titrated with NaOH, what is the pH of the solution at the half‑equivalence point?
Answer:
pH = 4.52
Explanation:
A monoprotic acid, HA, reacts with NaOH as follows:
HA+ NaOH → A⁻ + H₂O
When the weak acid HA, is in solution with its conjugate base, A⁻, a buffer is produced. That means in the titration of the weak acid with NaOH you are producing a buffer.
The pH of a buffer can be found using H-H equation:
pH = pKa + log [A⁻] / [HA]
Where pKa is -logKa = 4.52 and [] can be understood as the moles of A⁻ and HA.
pH = 4.52 + log [A⁻] / [HA]
In the half-equivalence point, the half of HA was converted in A⁻ and the other half still remains as HA.
That means moles of A⁻ and HA are: 0.480/2 = 0.24 moles of both A⁻ and HA
Replacing in H-H equation:
pH = 4.52 + log [A⁻] / [HA]
pH = 4.52 + log [0.24] / [0.24]
pH = 4.52-In the half-equivalence point of a titration of a weak acid, pH = pKa-
If you are given the molarity of a solution, what additional information would you need to find the weight/weight percent (w/w%)?
Answer:
- The molar mass of the solute, in order to convert from moles of solute to grams of solute.
- The density of solution, to convert from volume of solution to mass of solution.
Explanation:
Hello,
In this case, since molarity is mathematically defined as the moles of solute divided by the volume of solution and the weight/weight percent as the mass of solute divided by the mass of solution, we need:
- The molar mass of the solute, in order to convert from moles of solute to grams of solute.
- The density of solution, to convert from volume of solution to mass of solution.
For instance, if a 1-M solution of HCl has a density of 1.125 g/mL, we can compute the w/w% as follows:
[tex]w/w\%=1\frac{molHCl}{L\ sln}*\frac{36.45gHCl}{1molHCl}*\frac{1L\ sln}{1000mL\ sln}*\frac{1mL\ sln}{1.125g\ sln} *100\%\\\\w/w\%=3.15\%[/tex]
Whereas the first factor corresponds to the molar mass of HCl, the second one the conversion from L to mL of solution and the third one the density to express in terms of grams of solution.
Regards.
For the w/w% of the solution, information about the molecular mass of the solute, and density of the solution has been required.
Molarity can be defined as the moles of the solute per liter of the solution. The molarity can be used for the determination of the weight of the solute, by the information about the molecular weight of the compound.
Thus, for the w/w% of the solution, the weight of the solute has been determined with information about the molecular mass of the solute.
The weight of the solvent has been determined with the density of the solution. The density has been defined as the mass per unit volume.
Thus, for the w/w% of the solution, the weight of the solvent has been determined by the density of the solution.
For more information about the w/w% of the solution, refer to the link:
https://brainly.com/question/12369178
Which of the following is not part of the proper protocol for using acids and bases?
A. Storing acids and bases below 10°C
B. Add acid to water, not water to acid
C. Storing acids and bases in separate areas
D. Wearing protective clothing while handling
Answer:
A. Storing acids and bases below 10C
Explanation:
I took the exam and got it correct :)
Storing acids and bases below 10°C is not part of the proper protocol for using acids and bases.
What is an acid?
Acids are defined as substances which on dissociation yield H+ ions , and these substances are sour in taste.Compounds such as HCl, H₂SO₄ and HNO₃ are acids as they yield H+ ions on dissociation.
According to the number of H+ ions which are generated on dissociation acids are classified as mono-protic , di-protic ,tri-protic and polyprotic acids depending on the number of protons which are liberated on dissociation.
Acids are widely used in industries for production of fertilizers, detergents batteries and dyes.They are used in chemical industries for production of chemical compounds like salts which are produced by neutralization reactions.
Learn more about acids,here:
https://brainly.com/question/29796621
#SPJ2
Give the major organic products from the oxidation with KMnO4 for the following compounds. Assume an excess of KMnO4.
a) ethylbenzene
b) m-Xylene (1,3- dimethylbenzene)
c) 4-Propyl-3-t-butyltoluene
Answer:
Explanation:
a ) Benzoic acid is formed . In any alkyl benzene derivative , potassium permanganate reacts to form carboxylic acid . It oxidises side chains to carboxylic acid .
C₆H₅CH₃ + 0 = C₆H₅COOH + H₂O
O is provided by KMnO₄
b ) In this reaction isophthalic acid is formed .
C₆H₄(CH₃)₂ +O = C₆H₄(COOH)₂
c)
4-Propyl-3-t-butyltoluene
In this oxidation , three side chains of ring are 1 ) 1-methyl 2 ) 3- butyl 3 ) 4 propyl .
The methyl and 4 - propyl groups are oxidised to di- carboxylic acid and 3 butyl group remains intact ( unoxidised )
What is the molecular geometry of the underlined carbon atom in the following compound: HC-C-CH3?
U bent
tetrahedral
linear
trigonal planar
do none of the above
Answer:
linear
Explanation:
If we look at the compound, we will understand that the underlined carbon is in sp hybridization. Recall that sp hybridization leads to a C-C bond angle of about 180°. When two chemical species are at a bond angle if 180°, then the both bonding groups are found to be on a straight line.
Hence, for any carbon in a triply bonded state or indeed any carbon atom that is in an sp will exhibit a linear geometry according to the Valence Shell Electron Pair repulsion Theory since there are two electron pairs present.
The diagram shows two waves.
How do the frequencies of the waves compare?
Wave A has a lower frequency because it has a
smaller amplitude.
Wave A has a higher frequency because it has a
shorter wavelength.
The waves have the same frequency because they
have the same wavelength.
The waves have the same frequency because they
have the same amplitude.
Answer:
Wave A has a higher frequency because it has a shorter wavelength.
Explanation:
The frequency of a wave and the wave length are related by the following equation:
Velocity (v) = wave length (λ) x frequency (f)
v = λf
If we make frequency (f) the subject of the above equation, we will have:
f = v/λ
Let the velocity (v) be constant.
f = v/λ
f & 1/λ
From the equation above,
We can see that the frequency (f) is inversely proportional to the wavelength (λ).
This implies that a wave with a high frequency, will have a short wavelength and a wave with a short frequency will have a longer wavelength.
Now considering wave A and B in the diagram above,
Wave A will have a higher frequency because it has a shorter wavelength as explained above.
Answer:
it is the second option
Explanation:
Jane is doing an experiment with plants. She makes a good scientific guess that one will grow taller than the other. What is this guess called? A. Prediction B. Procedure C. Observation D. Data
Answer:
A
Explanation:
Butane gas (C4H10) burns in oxygen gas to produce carbon dioxide gas and water vapor. Balance the equation for this reaction (in lowest multiple integers). Write the unbalanced equation for this reaction (listed in the same order as given in the problem).
Answer:
C₄H₁₀(g) + O₂(g) ⇒ CO₂(g) + H₂O(g)
2 C₄H₁₀(g) + 13 O₂(g) ⇒ 8 CO₂(g) + 10 H₂O(g)
Explanation:
Butane gas (C₄H₁₀) burns in oxygen gas to produce carbon dioxide gas and water vapor. The unbalanced equation is:
C₄H₁₀(g) + O₂(g) ⇒ CO₂(g) + H₂O(g)
First, we will balance carbon and hydrogen which are in just one compound on each side.
C₄H₁₀(g) + O₂(g) ⇒ 4 CO₂(g) + 5 H₂O(g)
Finally, we will balance the oxygen atoms.
C₄H₁₀(g) + 6.5 O₂(g) ⇒ 4 CO₂(g) + 5 H₂O(g)
In order to have integers, we will multiply everý compound by 2.
2 C₄H₁₀(g) + 13 O₂(g) ⇒ 8 CO₂(g) + 10 H₂O(g)
When a solution is diluted with water, the ratio of the initial to final
volumes of solution is equal to the ratio of final to initial molarities
Select one:
True
-
When a solution is diluted with water, the ratio of the initial to final volumes of solution is equal to the ratio of final to initial molarities. The statement is True.
Concentration refers to the amount of a substance in a defined space. Another definition is that concentration is the ratio of solute in a solution to either solvent or total solution.
There are various methods of expressing the concentration of a solution.
Concentrations are usually expressed in terms of molarity, defined as the number of moles of solute in 1 L of solution.
Solutions of known concentration can be prepared either by dissolving a known mass of solute in a solvent and diluting to a desired final volume or by diluting the appropriate volume of a more concentrated solution (a stock solution) to the desired final volume.
Learn more about Concentrations, here:
https://brainly.com/question/10725862
#SPJ3
pls help me
Which statement best explains the relationship between the electric force between two charged objects and the distance between them?
a.As the distance increases by a factor, the electric force increases by the square of that factor.
b.As the distance increases by a factor, the electric force increases by twice that factor.
c.As the distance increases by a factor, the electric force decreases by twice that factor.
d.As the distance increases by a factor, the electric force decreases by the same factor. e.As the distance increases by a factor, the electric force decreases by the square of that factor.
Explanation:
The electric force between two charged particles is given by the formula as follows :
[tex]F=k\dfrac{q_1q_2}{r^2}[/tex]
Here,
k is electrostatic constant
[tex]q_1,q_2[/tex] are charges
r is the distance between charges
The above formula shows that the electric force is inversely proportional to the square of the distance between charges. It means that as the distance increases by a factor, the electric force decreases by the square of that factor. Hence, the correct option is (e).
11. How did the solubility product constant Ksp of KHT in pure water compare to its solubility product constant Ksp of KHT in KCl solution? Are these results what you would expect? Why?
Answer:
Explanation:
KHT is a salt which ionises in water as follows
KHT ⇄ K⁺ + HT⁻
Solubility product Kw= [ K⁺ ] [ HT⁻ ]
product of concentration of K⁺ and HT⁻ in water
In KCl solution , the solubility product of KHT will be decreased .
In KCl solution , there is already presence of K⁺ ion in the solution . So
in the equation
[ K⁺ ] [ HT⁻ ] = constant
when K⁺ increases [ HT⁻ ] decreases . Hence less of KHT dissociates due to which its solubility decreases . It is called common ion effect . It is so because here the presence of common ion that is K⁺ in both salt to be dissolved and in solvent , results in decrease of solubility of the salt .
A mercury manometer is used to measure pressure in the container illustrated. Calculate the pressure exerted by the gas if atmospheric pressure is 751 torr and the distance labeled is 176 mm.
Answer:
Pressure exerted by the gas is 574.85 torr
Explanation:
Atmospheric pressure = 751 torr
but 1 torr = 1 mmHg
therefore,
atmospheric pressure = 751 mmHg
1 mmHg = 133.3 Pa
therefore,
atmospheric pressure = 751 x 133.3 = 100108.3 Pa
distance labeled (tube section with mercury) = 176 mm
the pressure within the tube will be
[tex]P_{tube}[/tex] = ρgh
where ρ is the density of mercury = 13600 kg/m^3
h is the labeled distance = 176 mm = 0.176 m
g is acceleration due to gravity = 9.81 m/s^2
[tex]P_{tube}[/tex] = 13600 x 9.81 x 0.176 = 23481.216 Pa
The general equation for the pressure in the manometer will be
[tex]P_{atm}[/tex] = [tex]P_{tube}[/tex] + [tex]P_{gas}[/tex]
where [tex]P_{atm}[/tex] is the atmospheric pressure
[tex]P_{tube}[/tex] is the pressure within the tube with mercury
[tex]P_{gas}[/tex] is the pressure of the gas
substituting, we have
100108.3 = 23481.216 + [tex]P_{gas}[/tex]
[tex]P_{gas}[/tex] = 100108.3 - 23481.216 = 76627.1 Pa
This pressure can be stated in mmHg as
76627.1 /133.3 = 574.85 mmHg
and also equal to 574.85 torr
How do protons and neutrons stay together in the nucleus
Explanation:
The nucleus of an atom is held together by the strong nuclear force that binds together protons and neutrons. Although the strong nuclear force is the strongest of the four fundamental forces, it acts only over very short - typically nuclear - distances. It binds together the protons and neutrons in the nucleus.
Using Charles’s law, V1/T1 =V2/T2 and the information below, solve the question. If a balloon takes up 625L at 273K, what will the new volume be when the balloon is heated to 353K.
Answer:
The new volume is 808L.
Explanation:
First, you need to set up your proportion, using Charles's law.
V1 V2
=
T1 T2
Then, substitute for the ones you already know.
625 L V2
=
273 K 353 K
Then, you need to cross multiply.
625 x 353 = 273 x V2
Then, solve for V2.
220625 = 273 x V2
220625 ÷ 273 = V2
808 = V2
The final volume is 808L.
Rank the following substances in order from most soluble in water to least soluble in water: ethane, C2H6; 1-pentanol, C5H11OH; potassium chloride, KCl; and propane, C3H8.
Rank from most to least soluble in water. To rank items as equivalent, overlap them.
Most soluble Least soluble
Answer:
Explanation:
The substances are:
-) Ethane, [tex]C_2H_6[/tex]
-) 1-pentanol, [tex]C_5H_1_1OH[/tex]
-) Potassium chloride, [tex]KCl[/tex]
-) Propane, [tex]C_3H_8[/tex]
For this question, we have to remember the structure of water. Due to the electronegativity difference between oxygen and hydrogen in this structure, we will have the formation of dipoles. The dipoles interact better with net charges, due to this, the Potassium chloride is the compound with highest solubility (due to the formation of a cation and an anion):
[tex]KC~l->~K^~+~Cl^-[/tex]
Then, in 1-pentanol we an "OH". This structure due to the presence of the hydroxyl group can form hydrogen bonds. Therefore, this compound would be the second more soluble.
Finally, the difference between propane and ethane is a carbon. In propane, we have an additional carbon. If we have more carbons we will have more area of interaction. If we have more area we will have more solubility therefore propane is more soluble than ethanol.
In conclusion, the rank from most soluble to least soluble is:
1) Potassium chloride, [tex]KCl[/tex]
2) 1-pentanol, [tex]C_5H_1_1OH[/tex]
3) Propane, [tex]C_3H_8[/tex]
4) Ethane, [tex]C_2H_6[/tex]
I hope it helps!
Order of solubility in water will be:
KCl > C₅H₁₁OH > C₃H₈ > C₂H₆
Solubility in water:Any solvent soluble in water due to its polarity and ability to form hydrogen bonds. The presence of hydrogen bonding between molecules of a substance indicates that the molecules are polar. This means the molecules will be soluble in a polar solvent such as water.
Substances that are given:
Ethane(C₂H₆), 1-pentanol(C₅H₁₁OH), Potassium chloride(KCl) and propane(C₃H₈).
We will look at each compound one by one:
Potassium chloride is an ionic compound, it has ionic interactions between its solubility in water is highest due to the formation of potassium ([tex]K^{+}[/tex]) and ([tex]Cl^{-}[/tex]) ions.In 1-pentanol, there is presence of hydroxyl group thus it can easily form hydrogen bonds with water. Therefore it will be soluble in water and comes after potassium chloride in ranking order.In ethane and propane molecule, there is one extra carbon in case of propane due to which it leads to the more area for interactions therefore more area for interaction leads to more solubility thus propane is more soluble than ethane in water.Order of solubility in water will be:
KCl > C₅H₁₁OH > C₃H₈ > C₂H₆
Learn more:
https://brainly.com/question/17681113
Give the name of the following molecule
Answer:
[tex]\boxed{Heptene}[/tex]
Explanation:
Double Bond => An Alkene molecule
So, the suffix will be "-ene"
7 Carbons => So, we'll use the prefix "Hept-"
Combining the suffix and prefix, we get:
=> Heptene
Answer:
[tex]\boxed{\mathrm{Heptene}}[/tex]
Explanation:
Alkenes have double bonds. The molecule has one double bond.
Suffix ⇒ ene
The molecule has 7 carbon atoms and 14 hydrogen atoms.
Prefix ⇒ Hept (7 carbons)
The molecule is Heptene.
[tex]\mathrm{C_7H_{14}}[/tex]
what is the difference between acidic and basic protein
Answer:
Acidic proteins are proteins that move faster than serum albumin on zone electrophoresis (starch or acrylamide gel) and which bind most strongly to the basic ion exchangers used in protein chromatography.
Basic protein is a late gene product associated with the viral DNA within the nucleocapsid. The harnessing of this promoter allows the expression of foreign genes at earlier times than those using the very late phase promoters of the polyhedron and p10 genes.
Answer:
Acidic proteins are proteins that move faster than serum albumin on zone electrophoresis (starch or acrylamide gel) and which bind most strongly to the basic ion exchangers used in protein chromatography.
Basic protein is a late gene product associated with the viral DNA within the nucleocapsid. The harnessing of this promoter allows the expression of foreign genes at earlier times than those using the very late phase promoters of the polyhedron and p10
Explanation:
the equilibrium constant at 250C for the equation PCl5 PCl3 is kp 4.5 x 10^3 bar calculate value of grxn at 250C in which direction is reaction spontaneous when pcl3 cl2 standard conditions
Answer:
-36.6 kJ·mol⁻¹
Explanation:
1. Calculate ΔG
[tex]\text{The relationship between $\Delta G^{\circ}$ and K is}\\\Delta G^{\circ} = -RT \ln K[/tex]
T = (250 + 273.15) K = 523.15 K
[tex]\begin{array}{rcl}\Delta G & = & -8.314 \text{ J}\cdot\text{K}^{-1} \text{mol}^{-1} \times \text{523.15 K} \ln (4.5 \times 10^{3}) \\& = & -4349\text{ J}\cdot \text{mol}^{-1} \times 8.412\\& = & \text{-36 590 J}\cdot \text{mol}^{-1}\\& = & \textbf{-36.6 kJ}\cdot \text{mol}^{-1}\\\end{array}[/tex]
2. Direction of spontaneity
ΔG is negative, so the reaction is spontaneous in the forward direction.
Calculate the maximum volume in mL of 0.18 M HCl that a tablet containing 340 mg Al(OH)3 and 516 mg Mg(OH)2 would be expected to neutralize. Assume complete neutralization.
Answer:
171 mL of HCl
Explanation:
The first thing we want to do is consider the reaction between Al(OH)3 and water - as that is the expected reaction that is taking place,
Al(OH)3 + 3HCl → AlCl3 + 3H2O
Knowing this, let's identify the mass of Al(OH)3. Aluminum = 27 g / mol, Oxygen( 3 ) = 16 [tex]*[/tex] 3 = 48, Hydrogen ( 3 ) = 1 [tex]*[/tex] 3 = 3 - 27 + 48 + 3 = 78 g / mol. This value is approximated however ( 78 g / mol ), as the molar mass of each substance is rounded as well. Another key thing we need to do here is to convert 340 mg → grams, considering that that unit is a necessity with respect to moles, as you might know - 340 mg = 0.340 g.
Now we can calculate how much moles of HCl will be present in solution, provided we have sufficient information for that,
(0.340 g Al(OH)3) / (78.0036 g / mol Al(OH)3) [tex]*[/tex] (3 mol HCl / 1 mol Al(OH)3)
⇒ (.004358773185 g^2 / mol Al(OH)3) [tex]*[/tex] (3 HCl / Al(OH)3 )
⇒ .01307632 mol HCl
We can apply this same concept on the reaction of Mg(OH)2 and water, receiving the number of moles of HCl when that takes place. Then we can add the two ( moles of HCl ) and divide by the value " 0.18 mol / L " given to us.
" Mg(OH)2 + 2HCl → MgCl2 + 2H2O "
Molar mass of Mg(OH)2 = 58.3197 g / mol,
516 mg = 0.516 g
(0.516 g Mg(OH)2) / (58.3197 g / mol Mg(OH)2) [tex]*[/tex] (2 mol HCl / 1 mol Mg(OH)2)
= .017695564 mol HCL
___________
( .01307632 + .017695564 ) / ( 0.18 M HCl )
= 0.170954911 L
= 171 mL of HCl
Example: One liter of saturated calcium fluoride
solution contains 0.0167 gram of CaFat 25°C.
Calculate the molar solubility of, and Ksp for, CaF2.
Answer:
[tex]Molar\ solubility=2.14x10^{-4}M[/tex]
[tex]Ksp=3.91x10^{-11}[/tex]
Explanation:
Hello,
In this case, given that 0.0167 grams of calcium fluoride in 1 L of solution form a saturated one, we can notice it is the solubility, therefore, the molar solubility is computed by using the molar mass of calcium fluoride (78.1 g/mol):
[tex]Molar\ solubility=\frac{0.0167gCaF_2}{1L}*\frac{1molCaF_2}{78.1gCaF_2} \\\\Molar\ solubility=2.14x10^{-4}M[/tex]
Next, since dissociation equation for calcium fluoride is:
[tex]CaF_2(s)\rightarrow Ca^{2+}(aq)+2F^-(aq)[/tex]
The equilibrium expression is:
[tex]Ksp=[Ca^{2+}][F^-]^2[/tex]
We can compute the solubility product by remembering that the concentration of both calcium and fluoride ions equals the molar solubility, thereby:
[tex]Ksp=(2.14x10^{-4})(2*2.14x10^{-4})^2\\\\Ksp=3.91x10^{-11}[/tex]
Regards.
Why do you think sodium bicarbonate is included to neutralize an acidic spill rather than sodium hydroxide?
Imagine a hypothetical situation in which 250 mL of diethyl ether (SDS) has spilled inside of a chemical fume hood onto a stir plate that is plugged in and stirring. Discuss the risks associated with this situation (location, size, compound spilled, and external hazards), and then explain how this spill should be managed.
Answer:
Acid spills should be neutralized with sodium bicarbonate and then cleaned up with a paper towel or sponge.
Explanation:
Liquid octane reacts with gaseous oxygen gas to produce gaseous carbon dioxide and gaseous water . What is the theoretical yield of carbon dioxide formed from the reaction of of octane and of oxygen gas
Answer:
24.6g of CO₂ is theoretical yield
Explanation:
The reaction of 8.00g of octane with 38.9g of oxygen.
The reaction of octane with oxygen is:
C₈H₁₈(l) + 25/2O₂ → 9H₂O + 8CO₂
1 mole of octane reacts with 25/2 moles of oxygen to produce 8 moles of CO₂
Theoretical yield is the amount of carbon dioxide formed assuming a yield of 100%. To calculate theoretical yield, first, we need to find limiting reactant and, with the chemical reaction, we can obtain the theoretical moles of CO₂ produced and its mass to obtain theoretical yield.
Limiting reactant:
Moles octane (Molar mass: 114.23g/mol) in 8.00g:
8.00g × (1mol / 114.23g) = 0.0700 moles octane.
Moles oxygen (Molar mass: 32g/mol) in 38.9g:
38.9g × (1mol / 32g) = 1.2156 moles oxygen.
For a complete reaction of 1.2156 moles of O₂ there are necessaries:
1.2156 moles O₂ ₓ (1mol C₈H₁₈ / 25/2 moles O₂) = 0.0973 moles octane
As we have just 0.0700 moles,
octane is limiting reactant.Moles and mass of carbon dioxide:
As limiting reactant is octane, 0.0700 moles of C₈H₁₈ will produce:
0.0700mol C₈H₁₈ × (8 moles CO₂ / 1 mol C₈H₁₈) = 0.56 moles of CO₂ are theoretically produced. In mass (Molar mass CO₂ = 44.01g/mol):
0.56moles CO₂ × (44.01g / mol) =
24.6g of CO₂ is theoretical yield-Theoretical yield because we are assuming all octane is reacting. In real life, never happens like that-
Consider the following system, which is at equilibrium, 3C(s) + 3H2(g) <--> CH4(g) + C2H2(g) The result of removing some C(s) from the system will be:
Answer:
The equilibrium position will shift to the left, thus, favouring the backward reaction.
Explanation:
The equation for the reaction is given below:
3C(s) + 3H2(g) <==> CH4(g) + C2H2(g)
According to Le Chatelier's principle, if an external constrain such as change in concentration, temperature or pressure is imposed on a chemical system in equilibrium, the equilibrium will shift in order to neutralize the effect.
From Le Chatelier's principle, removing some C(s) implies removing some of the concentration of the reactants.
This will shift the equilibrium position to the left, thus, favouring the backward reaction (i.e forming more reactants) because removing C(s) implies that the products are now more than the reactants and as such, they will react to form more reactants.
The equilibrium position will shift to the left, thus, favouring the backward reaction.
The following information should be considered:
The equation for the reaction is given below:[tex]3C(s) + 3H2(g) <==> CH4(g) + C2H2(g)[/tex]
In the case when an external constrain like as change in concentration is applied on a chemical system in equilibrium, the equilibrium will shift in order to neutralize the effect.This will shift the equilibrium position to the left, thus, favouring the backward reaction.Learn more: https://brainly.com/question/10283285?referrer=searchResults
Find Ecell for an electrochemical cell based on the following reaction with [MnO4−]=1.20M, [H+]=1.50M, and [Ag+]=0.0100M. E∘cell for the reaction is +0.88V. MnO4−(aq)+4H+(aq)+3Ag(s)→MnO2(s)+2H2O(l)+3Ag+(aq)
Answer:
1.01 V
Explanation:
From Nernst equation;
Ecell= E°cell- 0.0592/n log Q
Where;
Ecell= observed emf of the cell
E°cell= standard emf of the cell
n= number of moles of electrons transferred
Q= reaction quotient
Q= [Ag^+]^3/[MnO4^-] [H^+]^4
Q= [0.01]^3/[1.20] [1.50]^4
Q= 1.65×10^-7
Ecell= 0.88 - 0.0592/3 log 1.65×10^-7
Ecell= 0.88 - [0.0197×(-6.78)]
Ecell= 0.88 + 0.134
Ecell= 1.01 V
The Handbook of Chemistry and Physics gives solubilities of the following compounds in grams per 100 mL water. Because these compounds are only slightly soluble, assume that the volume does not change on dissolution and calculate the solubility product for each.
(a) BaSeO4, 0.0118 g/100 mL
(b) Ba(BrO3)2 H20, 0.30 g/100 mL
(c) NH4MgAsO4-6H20, 0.038 g/100 mL
(d) La2(MoOs)3, 0.00179 g/100 mL
Answer:
(a) [tex]Ksp=4.50x10^{-7}[/tex]
(b) [tex]Ksp=1.55x10^{-6}[/tex]
(c) [tex]Ksp=2.27x10^{-12}[/tex]
(d) [tex]Ksp=1.05x10^{-22}[/tex]
Explanation:
Hello,
In this case, given the solubility of each salt, we can compute their molar solubilities by using the molar masses. Afterwards, by using the mole ratio between ions, we can compute the concentration of each dissolved and therefore the solubility product:
(a) [tex]BaSeO_4(s)\rightleftharpoons Ba^{2+}(aq)+SeO_4^{2-}(aq)[/tex]
[tex]Molar\ solubility=\frac{0.0188g}{100mL} *\frac{1mol}{280.3g}*\frac{1000mL}{1L}=6.7x10^{-4}\frac{mol}{L}[/tex]
In such a way, as barium and selenate ions are in 1:1 molar ratio, they have the same concentration, for which the solubility product turns out:
[tex]Ksp=[Ba^{2+}][SeO_4^{2-}]=(6.7x10^{-4}\frac{mol}{L} )^2\\\\Ksp=4.50x10^{-7}[/tex]
(B) [tex]Ba(BrO_3)_2(s)\rightleftharpoons Ba^{2+}(aq)+2BrO_3^{-}(aq)[/tex]
[tex]Molar\ solubility=\frac{0.30g}{100mL} *\frac{1mol}{411.15g}*\frac{1000mL}{1L}=7.30x10^{-3}\frac{mol}{L}[/tex]
In such a way, as barium and bromate ions are in 1:2 molar ratio, bromate ions have twice the concentration of barium ions, for which the solubility product turns out:
[tex]Ksp=[Ba^{2+}][BrO_3^-]^2=(7.30x10^{-3}\frac{mol}{L})(3.65x10^{-3}\frac{mol}{L})^2\\\\Ksp=1.55x10^{-6}[/tex]
(C) [tex]NH_4MgAsO_4(s)\rightleftharpoons NH_4^+(aq)+Mg^{2+}(aq)+AsO_4^{3-}(aq)[/tex]
[tex]Molar\ solubility=\frac{0.038g}{100mL} *\frac{1mol}{289.35g}*\frac{1000mL}{1L}=1.31x10^{-4}\frac{mol}{L}[/tex]
In such a way, as ammonium, magnesium and arsenate ions are in 1:1:1 molar ratio, they have the same concentrations, for which the solubility product turns out:
[tex]Ksp=[NH_4^+][Mg^{2+}][AsO_4^{3-}]^2=(1.31x10^{-4}\frac{mol}{L})^3\\\\Ksp=2.27x10^{-12}[/tex]
(D) [tex]La_2(MoOs)_3(s)\rightleftharpoons 2La^{3+}(aq)+3MoOs^{2-}(aq)[/tex]
[tex]Molar\ solubility=\frac{0.00179g}{100mL} *\frac{1mol}{1136.38g}*\frac{1000mL}{1L}=1.58x10^{-5}\frac{mol}{L}[/tex]
In such a way, as the involved ions are in 2:3 molar ratio, La ion is twice the molar solubility and MoOs ion is three times it, for which the solubility product turns out:
[tex]Ksp=[La^{3+}]^2[MoOs^{-2}]^3=(2*1.58x10^{-5}\frac{mol}{L})^2(3*1.58x10^{-5}\frac{mol}{L})^3\\\\Ksp=1.05x10^{-22}[/tex]
Best regards.
Identify each reaction from the citric acid cycle as an oxidation‑reduction reaction, an esterification reaction, an amidation reaction, a hydrolysis reaction, a hydration reaction, or a dehydration reaction.
1. Which type of reaction occurs when succinyl-CoA is converted to succinate in the citric acid cycle?
2. Which type of reaction occurs when malate is converted to oxaloacetate in the citric acid cycle?
3. Which type of reaction occurs when aconitate is converted to isocitrate in the citric acid cycle?
Answer:
1. Oxidation-reduction and hydrolysis
2. Oxidation-reduction
3. Dehydration
Explanation:
Our options for each reaction are:
a) Oxidation‑reduction reaction
b) Esterification reaction
c) Amidation reaction
d) Hydrolysis reaction
c) Hydration reaction
f) Dehydration reaction
In reaction one the have the rupture of the S-CoA bond. This reaction takes place by the addition of a water molecule and the oxidation to a carboxylic acid group. So, for reaction 1 we will have an oxidation-reduction and a hydrolysis reaction.
For reaction 2, the functional group change from alcohol to a carboxylic acid. So, we have an oxidation-reduction reaction.
In the last reaction, we have the production of a double bond by the removal of water. With this in mind, we have a dehydration reaction.
See figure 1
I hope it helps
1. What is the frequency of light with a wavelength of 1064 nm?
2. How many photons of 1064 nm light are contained in a 535 Joules of this light?
Answer:
1) 2.8×10^14 Hz
2) 2.88×10^21 photons
Explanation:
Recall that the formula for the speed of a wave is v=λf, since we are talking about light, we can replace v with c hence; c=λf. Where;
c= speed of light = 3 ×10^8 m/s
λ= wavelength of light= 1064nm= 1064×10^-9 m
f= frequency of light= the unknown
Hence;
f= c/λ= 3×10^8/1064×10^-9
f= 2.8×10^14 Hz
Energy of a single photon=hf= 6.626×10^-34 Js × 2.8×10^14 s^-1 = 18.55×10^-20J
If 1 photon contains 18.55×10^-20J of energy
x photons contains 535 J of energy
x= 535/18.55×10^-20J
x= 2.88×10^21 photons
Explain the Doppler effect using light. Why is the Doppler effect important in astronomy?
How many mL of calcium hydroxide are required to neutralize 25.0 mL of 0.50 M
nitric acid?
Answer:
6.5 mL
Explanation:
Step 1: Write the balanced reaction
Ca(OH)₂ + 2 HNO₃ ⇒ Ca(NO₃)₂ + 2 H₂O
Step 2: Calculate the reacting moles of nitric acid
25.0 mL of 0.50 M nitric acid react.
[tex]0.0250L \times \frac{0.50mol}{L} = 0.013 mol[/tex]
Step 3: Calculate the reacting moles of calcium hydroxide
The molar ratio of Ca(OH)₂ to HNO₃ is 1:2. The reacting moles of Ca(OH)₂ are 1/2 × 0.013 mol = 6.5 × 10⁻³ mol
Step 4: Calculate the volume of calcium hydroxide
To answer this, we need the concentration of calcium hydroxide. Since the data is missing, let's suppose it is 1.0 M.
[tex]6.5 \times 10^{-3} mol \times \frac{1,000mL}{1.0mol} = 6.5 mL[/tex]
A line-angle formula shows a ring with six vertices and alternating single and double bonds. An OCH3 group is attached to the first vertex. A CH2CH3 group is attached to the third (clockwise) vertex. Spell out the full name of the compound.Part A. A line-angle formula shows a ring with six vertices and alternating single and double bonds. A COOH group is attached to the first vertex. A Br atom is attached to the second (clockwise) and the third vertices. Spell out the full name of the compound.Part B. A line-angle formula shows a ring with six vertices and alternating single and double bonds. A CH3 group is attached to the first vertex. An F atom is attached to the third (clockwise) vertex. Spell out the full name of the compound.
Answer:
1) 3-Ethylanisole
2) 2,3-Dibromobenzoic acid
3) 3-Fluorotoluene
Explanation:
Let us try to look at the structures of each compound one after the other as described in the question.
1) A ring with six vertices and alternating double and single bonds must refer to a benzene ring. A benzene ring having -OCH3 attached to the first vertex is called anisole. If a -CH2CH3 group is now attached at position 3, we now name the compound 3-Ethylanisole.
2) A ring with six vertices and alternating single and double bonds is a benzene ring. If the ring has -COOH attached to the first vertex, we call it benzoic acid. If bromine atoms are attached to the second and third vertices respectively, the compound is now named 2,3-Dibromobenzoic acid.
3) A ring with alternating single and double bonds is a benzene ring. If a -CH3 group is attached to the first vertex, we call the compound toluene. If a fluorine atom is now attached to position 3, the compound can now be named 3-Fluorotoluene