How many excess electrons must be distributed uniformly within the volume of an isolated plastic sphere 22.0 cmcm in diameter to produce an electric field of 1340 N/CN/C just outside the surface of the sphere?

Answer: It is given that A body weighs 20gf in air and 18. 0gf in water. Hence, the answer X-3 = 7.

Explanation:

potential energy ===> kinetic energy

when an object is stretched there will be a stored energy in it enough to react to the upcoming change

that is the potential energy

similar to a stretched elastic band

kinetic energy is the energy on a moving object

*If a kinetic energy takes place there must gave been a potential energy before*

A catapult is used to fire an object into the air, the potential energy transfers as the elastic potential energy and to the kinetic energy when the catapult is released and stretched.

The potential energy is associated with bodies that are above a reference point, at that reference point the value of potential energy is taken as zero. For example, if an object with a mass M is in a tower that is 140 meters high, its potential energy is defined as the product of the mass of the object by gravity and by the height at which the object is measured from the reference point.

Ep =mgh

When talking about elastic objects such as springs or elastic fibers, it is usually understood that there is an elastic potential energy associated with the constant of the spring. This can be calculated using the following equation:

U ela = 1/2×k×(Dx)²

where:

k = elastic constant of the elastic material [N/m]

Dx = distance stretched or compressed of the elastic material [m]

U = elastic energy [Joules]

So, there are difference between the elastic potential energy and the potential energy.

In a catapult, Initially, energy is stored in the form of potential energy which is later converted into kinetic energy. Potential energy can be stored in the form of elastic potential energy in the case of elastic. It suddenly releases the energy to propel the object into the air.

Learn more about catapult,

https://brainly.com/question/20899342

#SPJ2

Answer:

The two middle chains are for suspension of the glass surface, while the fours chains at all corners prevents tilting

Explanation:

From the picture, the the frame bearing the glass surface is suspended by the two metal chains at the middle,

While the balance to avoid tilting to either directions is maintained by the four  chains at all corners.

Answer:

The change on the Celsius scale is 27.22 °C.

Explanation:

The conversion of Fahrenheit to Celsius is the following:

[tex]T = \frac{5}{9}(^{\circ} F - 32)[/tex]

So, we need to convert T₁ and T₂ from °F to °C:

[tex]T_{1} = \frac{5}{9}(^{\circ} F - 32) = \frac{5}{9}(- 4 - 32) = -20 ^{\circ} C[/tex]

[tex]T_{2} = \frac{5}{9}(^{\circ} F - 32) = \frac{5}{9}(45 - 32) = 7.22 ^{\circ} C[/tex]

Hence, the change on the Celsius scale is:

[tex] \Delta T = T_{2} - T_{1} = 7.22 - (-20) = 27.22 ^{\circ} C [/tex]

Therefore, the change on the Celsius scale is 27.22 °C.

I hope it helps you!

Answer:

we have to use formula of volume to find volume of a cuboid. ( i.e v = l ×b ×h)

Explanation:

here, let your length of cuboid be x cm, breadth be y cm and height be z cm .

now, formula to find volume of cuboid = length ×

breadth × height.

so, v( volume)= l (length)× b (breadth)× h (height)

or, v= x cm × y cm × z cm

therefore, volume is xyz cm^3..... answer.

hope it helps..

Answer: length times width times height

Explanation:

[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]

Actually Welcome to the Concept of the Current Electricity .

Since we know that, Current is Charge per unit time.

so we get as,

Q = I*t

here, Q = charge, I = current, t = time.

Answer:

The light transmitted through the system will be 0.125*I₀.  

Explanation:

The light transmitted through the system can be found using Malus Law:

[tex] I = I_{0}cos^{2}(\theta) [/tex]    (1)

Where:

I: is the intensity of the light transmitted

I₀: is the initial intensity

θ is the angle relative to the first polarizer’s = 60°

Because the light transmitted by the first polarizer is dropped by half, the equation (1) results as:  

[tex] I = \frac{I_{0}}{2}cos^{2}(\theta) [/tex]

[tex] I = \frac{I_{0}}{2}cos^{2}(60) [/tex]

[tex] I = 0.125I_{0} = \frac{1}{8}I_{0} [/tex]

Therefore, the light transmitted through the system will be 0.125*I₀.  

I hope it helps you!

Answer:

The relative velocity of an object A with respect to another object B.

Explanation:

The relative velocity of an object A with respect to another object B is the velocity that object A would appear to have to an observer situated on object B moving along with it.

Answer:

1)31/3Ω

2)18/31A

3)4.06V

Explanation:

According to the diagram and 10 Ω resistors are parallel to each other, parallel resistor can be calculated using the formula below

1/R= 1/R1 + 1/R2

But we know R1= 5 Ω and R2= 10 Ω

1/R= 1/5 + 1/10

R= 10/3 Ω

=3.33 Ω

Then if we follow the given figure, 10/3 Ω and 7Ω are now in series then

Req = 10/3 +7

Req= 31/3 Ω

Therefore, equivalent resistance = 31/3 Ω

According to ohms law we know that V= IR

Then I= V/R

Where I= current

R= resistance

V= voltage

I= 6/(31/3)

I= 18/31A

We can now calculate the voltage accross the resistor which is

V=(18/31)× 7

V=4.06V

Therefore, the voltage accross the 7 ohm resistor is 4.06V

CHECK THE FIQURE AT THE ATTACHMENT

Answer:

23.67 km / hr

Explanation:

car travels 355 km (d)

duration = 15 hrs  (t)

average speed formula = v = d / t

v = 355 km / 15 hr

v = 23.67 km / hr

Explanation:

Hello, there!!!

Here, your question is asking about the speed and the given are:

distance (s)= 355km

time (t) = 15hrs.

speed (v)=?

now,

we have the formula:

v= s/t

or, v = 335km /15 hrs.

Therefore, the speed of car was 23.67km/hr.

Hope it helps..

Answer:

38.8 km/hr

Explanation:

The total distance is 2 × 282 km = 564 km.

The total time is 6 hr 32 min + 8 hr = 14 hr 32 min = 14.533 hr.

The average speed is:

(564 km) / (14.533 hr)

38.8 km/hr

Explanation:

The kinetic energy of an object is given by :

[tex]E=\dfrac{1}{2}mv^2[/tex]

m is mass of the object

v is the speed of the object

It is clear from the above relation that the kinetic energy of the object is directly proportional to the product of mass and velocity.

The hypothesis can be :

If the speed of the object increased then its kinetic energy increase because kinetic energy is directly proportional to ist speed.

The kinetic energy of an object is given by :

m is mass of the object

v is the speed of the object

It is clear from the above relation that the kinetic energy of the object is directly proportional to the product of mass and velocity.

The hypothesis can be :

If the speed of the object increased then its kinetic energy increase because kinetic energy is directly proportional to its speed.

Explanation:

The age of the universe is 13.8 billion years.

We know that,

1 billion years = 10⁹ years

So,

[tex]13.8\ \text{billion years}=13.8\times 10^9\ \text{years}[/tex]

We need to convert the age of the universe to the scientific notation.

Since, [tex]1\ \text{year}=3.154\times 10^7\ s[/tex]

So,

[tex]13.8\times 10^9\ \text{years}=13.8\times 10^9\times 3.154 \times 10^7\\\\=4.35\times 10^{17}\ s[/tex]

So, the age of the universe is [tex]4.35\times 10^{17}\ s[/tex].

Answer:

So the universe is approximately 1.34 x 10^10 years old

Explanation:

Edmentum

Answer:

Does more sunlight make rose bushes grow taller?

Explanation:

When conducting a research, the researcher usually poses research questions in order to confirm or disprove the research hypothesis. A research question addresses the key issues and questions that the research project is intended to answer. Good research questions always aim at improving the body of knowledge on the selected topic of the research. Research questions must be narrowed down to specific details of the topic. They must also be testable, they must not be vague.

If I am studying the effect of sunlight on rose bushes, then the question, 'does more sunlight make rose bushes grow taller?' Is apt to the research because it can be tested by exposing various thorn bush plants to varying degrees of sunlight and recording my observation.

Answer:

If rose bushes receive more hours of sunlight each day, they will grow taller.

Explanation:

I just answered it on Apex, and they like to switch up how they word things sometimes.

Answer:

20 m

Explanation:

Given:

v = 0 m/s

a = -10 m/s²

t = 4 s / 2 = 2 s

Find: Δy

Δy = vt − ½ at²

Δy = (0 m/s) (2 s) − ½ (-10 m/s²) (2 s)²

Δy = 20 m

Answer:

D. Mars is a long distance away

Answer:

The deviation of a mirror is equal to twice the angle of incidence.The total angle between the straight-line path and the reflected ray is twice the angle of incidence. This is called the deviation of the light and measures the angle at which the light has strayed from its initial straight-line path.

HOPE IT HELPS :)

PLEASE MARK IT THE BRAINLIEST!

Explanation:

F = ma

2 N = (10 kg) a

a = 0.2 m/s²

Answer:

27 m/s

Explanation:

V_final = v_initial + a*t

V_final = 15 + 3 * 4

V_final = 27 m/s

Answer:

The wavelength is 2 meters

Explanation:

The relationship between the frequency, the speed and the wavelength is given by the relation;

v = f × λ

The given parameters are;

The distance of the duck from the edge of the pond = 12 m

The number of ripples produced per second = Frequency, f = 2 Hz

The time it takes the ripple to reach the edge of the pond after travelling past the duck = 3 seconds

Therefore, speed of the wave, v = Distance/time = 12 m/(3 s) = 4 m/s

The wavelength, λ, is therefore;

λ = v/f = (4 m/s)/(2 Hz) = 2 meters.

Answer:

Explanation:

Resistance of first wire

R₁ = ρL / A where ρ is specific resistance

for second wire the resistance

R₂ = ρ2L / A = 2 ρL / A

For third wire

R₃ = ρL /2 A

The resistance is in the order

R₂ > R₁ > R₃

So , current will be maximum in R₃

I₃ > I₁ > I₂

Where I₁ , I₂  and I₃ is current in first , second and third wire .

When vector contain distance and direction it is also known as displacement .

Answer:

Using X = sum( x's * mass)/sum( masses)

= [(0)*(6400)+ (-9.5*1000) + (9.5)*(1000) + (9.5)*(1000)]/(6400+1000+1000+1000)

= 1.01 m

Y = sum( y's * mass)/sum( masses)

= [(0)*(6400) + (9.5)*(1000) +(-9.5)*(1000) + (-9.5)*(1000)]/ (6400+1000+1000+1000)

= -1.01 m

Answer:

Explanation:

Law of conservation of momentum is applied in solving collision problem. When two body collides, their momentum after collision can be determined using the law.

The law States that the sum of momentum of two bodies before collision is equal to the sum of their momentum after collision. Before collision, both bodies moves with a different velocity while during some cases, the bodies moves with a common velocity after collision.

Whether they move with or without the same velocity depends on the type of collision that exists between them after the collision. After collision, some object sticks together and move with a common velocity while some doesn't.

If the bodies sticks together after collision, the type of collision that occur is inelastic (energy is not conserved) and if they splits after collision, the type of collision that occur is an elastic collision (energy is conserved).

Let m1 and m2 be the masses of the bodies

u1 and u2 be their velocities before collision

v1 and v2 be their velocities after collision.

According to the law;

m1u1 + m2u2 = m1v1 + m2v2

Note that momentum = mass × velocity of the body.

Answer:

yeah this statement is tru

Explanation:

it is because the speed of the bullet is more than the speed of rolling ball .so from this reason we cannot catch a bullet.

A bullet will be moving much faster than a rolling ball. Even seeing a bullet in flight requires it to be extremely low velocity.

Answer:

The minimum distance to the object that the radar can detect is 124.995 m

Explanation:

Here, we are to calculate the shortest distance to an object the radar in the question can detect.

Mathematically;

v = c/λ

Where v is the frequency, c is the speed of light and λ is the wave length

Thus;

v = (3 * 10^8)/2.5 = 1.2 * 10^8 Hz

Mathematically, the time period

t = 1/v = 1/(1.2 * 10^8) = 0.000000008333 = 8.333 * 10^-9 sec

From the question, we are told that the transmitting time is 100 times a single oscillation

Transmitting time = 100 * one oscillation

Hence Transmitting time = 100 * 8.33 * 10^-9 = 8.33 * 10-7

Mathematically;

Minimum distance =( Transmitting time * speed of light)/2 =

(8.33 * 10^-7 * 3 * 10^8)/2 = 124.995 m

Answer:

Uniform circular motion

Explanation:

When a car is moving with constant speed along a curve, it will said to have uniform circular motion. The speed of the car remains constant in this case. But its velocity keeps on changing. The velocity can be calculated by drawing the tangent on the circle. Hence, the motion of the car is uniform circular motion.

Answer:

Uniform motion

Explanation:

The motion when a car is moving with constant speed along a curve is an example of uniform motion.

A car moving at constant speed covers equal distances in equal intervals of time. The average speed remains the same in uniform motion.

The curve defines the path of the motion and the speed remains constant.

Answer:

Scenario A:  toward object 1

Scenario B: toward object 2

Scenario C:  toward object 1

Scenario D:  toward object 1

Explanation:

The heat transfer will take place for different cases are as follow

A: From skin to lotion

B: From lasagna to plate

C: Lava to ocean water

D: From sidewalk to egg

Heat always flows from a higher temperature body to a low-temperature body. Heat transfer, any or all of several kinds of phenomena, is considered a mechanism, that conveys energy and entropy from one location to another.

The specific mechanisms are usually referred to as convection, thermal radiation, and conduction (see thermal conduction).

Conduction involves the transfer of energy and entropy between adjacent molecules, usually a slow process.

Convection involves the movement of heated fluid, such as air, usually a fairly rapid process.

Radiation refers to the transmission of energy as electromagnetic radiation from its emission at a heated surface to its absorption on another surface, a process requiring no medium to convey the energy

The heat transfer will take place for different cases are as follow

A: From skin to lotion

B: From lasagna to plate

C: Lava to ocean water

D: From sidewalk to egg

To know more about Heat transfer follow

https://brainly.com/question/16055406