How do some plants defend themselves against predators?

Plants transpire and produce excess water to keep predators away.

Plants grow roots deeper into the ground, making them harder to remove.

Plants can have thorns on their stems or poison on their leaves.

Smaller plants bend and grow toward taller plants and trees.

Answers

Answer 1

As a defence against predators, plants can have thorns on their stems or poison on their foliage.

How do certain plants protect themselves from scavengers?

For many plants, physical defences serve as their first line of defence. Herbivores find it challenging to consume vegetation because of these defences. Physical barriers include things like the thorns on flowers and the spikes on trees like hawthorn. These bodily barriers prevent herbivores from consuming the stalks or leaves of plants by injuring them.

What do plants use to protect themselves from?

The first line of defence against pathogens is the outer covering of a plant, which is comparable to our skin and is also referred to as the epidermis. On some plant sections, such as the bark of a tree or the waxy cuticle on leaves, extra layers protect the epidermis itself.

To know more about predators visit:-

https://brainly.com/question/3781712

#SPJ1


Related Questions

a newly discovered star is 2.33 times brighter when measured using a u filter than when using a b filter. what is the star's (u-b) color? a newly discovered star is 2.33 times brighter when measured using a u filter than when using a b filter. what is the star's (u-b) color?

Answers

The star's (u-b) color can be calculated by taking the logarithm base 10 of the brightness ratio between the u and b filters, which yields a value of 0.63 magnitudes. Therefore, the star has a blue color.

The newly discovered star in this instance is revealed to be 2.33 times brighter when measured with the u filter than with the b filter. This ratio's logarithm in base 10 gives us log(2.33) = 0.37. The (u-b) colour index is 0.63 magnitudes since we are interested in the magnitude difference between the u and b filters, thus we must multiply this number by a factor of 1.7. This number being positive leads us to the conclusion that the star is blue. We cannot, however, draw any firm conclusions about the size, age, or makeup of the star without knowing more about its absolute brightness or other features.

learn more about brightness ratio here:

https://brainly.com/question/10316679

#SPJ4

assume ω = 13.0 rad/s . what is the magnitude v of the velocity of the particle in m/s ?

Answers

Given Angular velocity ω = 13.0 rad/s, magnitude v of the velocity of the particle in m/s = 13 m/s.

Explanation:

The formula used to calculate the linear velocity of a particle that is rotating at a distance from a fixed point at an angular velocity of ω radians per second is given as, v = r * ω.

Where, v = Linear velocity of a particle that is rotating at a distance r from a fixed point, r = Distance from the fixed point, ω = Angular velocity of the particle. Substituting the given values in the formula, v = r * ω= 1 * 13= 13 m/s. Therefore, the magnitude v of the velocity of the particle in m/s is 13 m/s.

To know more about circular motion, visit:

https://brainly.com/question/2285236

#SPJ11

what should one do to apply maximum pushing force? 1) use the largest possible number of segments 2) use the smallest segments 3) move through a large range of motion 4) move the segments in an ordered sequence, one after the other 2, 4 1, 3 1, 2, 3 1, 3, 4

Answers

1) To apply maximum pushing force, use the largest possible number of segments and move through a large range of motion.
2) Additionally, move the segments in an ordered sequence, one after the other, to ensure maximum pushing force.
3) For example, the sequence could be 1, 3, 2, 4.
To apply maximum pushing force, one should move through a large range of motion.

What is maximum pushing force?

Maximum pushing force refers to the amount of force that a person can exert on an object when pushing it. The amount of maximum pushing force that a person can apply is dependent on various factors such as the strength of their muscles, the weight of the object being pushed, and the range of motion.

What should one do to apply maximum pushing force?

To apply maximum pushing force, one should move through a large range of motion. Moving through a large range of motion helps to recruit a larger number of muscle fibers which in turn helps to generate more force. Therefore, option 3 is the correct answer. Option 1 is incorrect because using the largest possible number of segments does not necessarily translate to more force. Option 2 is also incorrect because using the smallest segments may not result in more force. Option 4 is incorrect because moving the segments in an ordered sequence, one after the other does not always translate to more force.

Learn more about the range of the motion:

https://brainly.com/question/1024520

#SPJ11

if an object is being subjected to two forces in the positive y-direction of 20n each, a force in the positive x-y direction of 65n at an angle of 60 degrees with respect to the positive x-axis, and a force in the positive x-direction of 15n. what is the resultant force?

Answers

The resultant force of an object being subjected to two forces in the positive y-direction of 20N each, a force in the positive x-y direction of 65N at an angle of 60 degrees with respect to the positive x-axis, and a force in the positive x-direction of 15N is 103.85N.

This can be calculated by the use of vector addition. Vector addition involves combining the vectors mathematically so that the total effect of all the vectors can be seen.

Step 1: Represent each of the forces as vectors. For the two forces in the positive y-direction, these can be represented as Fy1 = 20N and Fy2 = 20N. The force in the positive x-y direction can be represented as Fxy = 65N at an angle of 60 degrees. Lastly, the force in the positive x-direction can be represented as Fx = 15N.

Step 2: Calculate the components of the force in the positive x-y direction. This can be done using trigonometry. The horizontal component is found by multiplying the force by the cosine of the angle. This gives the horizontal component as Fxy,h = 65N x cos60 = 65N x 0.5 = 32.5N. Similarly, the vertical component is found by multiplying the force by the sine of the angle. This gives the vertical component as Fxy,v = 65N x sin60 = 65N x 0.866 = 56.59N.

Step 3: Calculate the resultant force. This can be done by summing the components of each of the forces. For the x-direction, this is simply Fx = 15N + 32.5N = 47.5N. For the y-direction, this is Fy = 20N + 20N + 56.59N = 96.59N.

Step 4: Calculate the magnitude and direction of the resultant force. This can be done using the Pythagorean theorem, since the magnitude is the hypotenuse of a right triangle. The magnitude of the resultant force is thus Fres = √(47.52 + 96.592) = 103.85N. The direction is found by using the inverse tangent of the x and y components. This gives the direction as θ = tan-1(96.59/47.5) = 77.94°.

Therefore, the resultant force of the object being subjected to two forces in the positive y-direction of 20N each, a force in the positive x-y direction of 65N at an angle of 60 degrees with respect to the positive x-axis, and a force in the positive x-direction of 15N is 103.85N at an angle of 77.94° with respect to the positive x-axis.


For more such questions on Force.

https://brainly.com/question/28779518#

#SPJ11

if a 100.0 g object needs 1145 joule to increase temperature by 10.0 what's it's specific heat capacity

Answers

The specific heat capacity of the object is 1.145 J/(g°C)

The specific heat capacity of the object can be calculated using the formula:

specific heat capacity = (energy required)/(mass x change in temperature)

In this case, the energy required to increase the temperature of the object by 10.0 degrees Celsius is 1145 J, the mass of the object is 100.0 g, and the change in temperature is 10.0 degrees Celsius.

specific heat capacity = (1145 J)/(100.0 g x 10.0 °C)

specific heat capacity = 1.145 J/(g°C)

Therefore, the specific heat capacity of the object is 1.145 J/(g°C). This means that it takes 1.145 joules of energy to raise the temperature of 1 gram of the object by 1 degree Celsius.

To know more about specific heat , here

brainly.com/question/11297584

#SPJ4

Given that the population standard deviation is 6.8, what sample size is required to be 90%
confident that the estimated mean has an error less than 0.02?

Answers

The sample size required to be 90% confident that the estimated mean has an error less than 0.02 is 5534.

The formula used to calculate the required sample size is given by:

n = ((zα/2 × σ) / E)²

where:

n = sample size

zα/2 = z-value for the level of confidence (α/2

)σ = population standard deviation

E = maximum error

Population standard deviation, σ = 6.8

Maximum error, E = 0.02

Confidence level, α = 0.9

Therefore, α/2 = 0.45 (since the confidence interval is symmetric)

The z-value for 0.45 level of confidence is 1.645.

Thus:

n = ((1.645 × 6.8) / 0.02)²

n = (11.066 / 0.02)²

n = 5533.0256

Rounding up, the required sample size is n = 5534.

You can learn more about  standard deviation at

https://brainly.com/question/475676

#SPJ11

a spherical shell and a solid sphere (both of the same total mass) are rotating about a diameter at the same angular frequency and with the same rotational kinetic energy. what is the ratio of the spherical shell radius to the solid sphere (i.e., rspherical shell/rsolid sphere)?

Answers

Answer:

I (shell) = 2/3 M R^2

I(sphere) = 2/5 M R^2

I(shell) / I(sphere) = (2/3) / (2/5) = 5/3

R(shell) / R(sphere) = (5/3)^1/2 = (15)^1/2 / 3

identify the equation that relates the wave period and wavelength.

Answers

Answer:

The equation that relates the wave period and wavelength is:

wave speed = wavelength / wave period

Explanation:

The equation that relates the wave period (T) and wavelength (λ) is v = λ / T, Where v represents the velocity of the wave.

The wave period (T) is the time it takes for one complete cycle of a wave to pass a given point. It is measured in seconds (s) and represents the time taken for a wave to repeat its pattern.

The wavelength (λ) is the distance between two corresponding points on a wave, usually measured from crest to crest or trough to trough. It is denoted in units of length, such as meters (m) or centimeters (cm). The wavelength determines the spatial extent of a wave's repeating pattern.

Learn more about wavelength, here:

https://brainly.com/question/14078477

#SPJ6

Electron diffraction
21.
a) The table below shows four statements that may or may not be true about the wave nature
of the electron. Place a tick next to the statement if it is correct and cross if it is incorrect.
Electron can be diffracted by matter. This confirms their wave nature.
The wavelength of the electron is given by the de Broglie equation
The wave associated with a moving electron is an electromagnetic wave
The kinetic energy of the electron is given by the equation E = hf
b) Calculate the speed of a carbon atom of mass 2.0 x 10-26 kg travelling in space with a de
Broglie wavelength of 6.8 x 10-26 m.

Answers

a) The correct statements are: Electron can be diffracted by matter. This confirms their wave nature.

The wavelength of the electron is given by the de Broglie equation.

The incorrect statements are:

The wave associated with a moving electron is an electromagnetic wave.

The kinetic energy of the electron is given by the equation E = hf.

b) The de Broglie wavelength of a particle is given by the equation:

λ = h / p

where λ is the wavelength, h is Planck’s constant, and p is the momentum of the particle. The momentum of the carbon atom is given by:

p = mv

where m is the mass of the carbon atom and v is its velocity. Substituting the given values, we get:

p = (2.0 x 10⁻²⁶kg) v

λ = h / p

λ = h / (2.0 x 10⁻²⁶ kg) v

Substituting the given value of λ, we get:

6.8 x 10⁻²⁶ m = (6.626 x 10⁻³⁴ J s) / (2.0 x 10⁻²⁶kg) v

Solving for v, we get:

v = (6.626 x 10⁻³⁴ J s) / (2.0 x 10⁻²⁶ kg) (6.8 x 10⁻²⁶ m)

v = 1.62 x 10³ m/s

Therefore, the speed of the carbon atom is 1.62 x 10³ m/s.

To know more about wave nature, visit :

https://brainly.com/question/29469813

#SPJ1

What is initial velocity of a ball (m/s) which is thrown upwards and takes 15.0s to return to its starting position?

A. 73.6 m/s
B. 73.6 m/s^2
C. 25 m/s^2
D. 25 m/s

Answers

The initial velocity of the ball is approximately 73.65 m/s. So, the correct option is A. 73.6 m/s.


Acceleration-Time Graph: What is it?

A particle travelling in a straight line has its acceleration plotted against time on an acceleration-time graph.

To solve this problem, we need to use the formula for the displacement of an object under constant acceleration:

Δy = v₀t + 1/2at²

where:

Δy = 0 (because the ball returns to its starting position)

v₀ = initial velocity (what we're trying to find)

t = 15.0 s (the time it takes for the ball to return to its starting position)

a = acceleration due to gravity (approximately -9.81 m/s², assuming the ball is thrown on Earth)

Plugging in these values, we get:

0 = v₀(15.0 s) + 1/2(-9.81 m/s²)(15.0 s)²

Simplifying:

0 = 15.0v₀ - 1104.75

Solving for v₀:

v₀ = 1104.75/15.0

v₀ ≈ 73.65 m/s

To know more about velocity visit:-

brainly.com/question/18084516

#SPJ1

a tank, shaped like a cone has height meter and base radius meter. it is placed so that the circular part is upward. it is full of water, and we have to pump it all out by a pipe that is always leveled at the surface of the water. assume that a cubic meter of water weighs , i.e. the density of water is . how much work does it require to pump all water out of the tank? enter the exact value of your answer.

Answers

The work required to pump all the water out of the tank is [tex](1000/3)\pi g[/tex] J.

The volume of a cone can be calculated using the formula:

[tex]V = (1/3)\pi r^2h[/tex]

where r is the base radius, h is the height, and π is the mathematical constant pi.

Assuming the base radius of the cone is 1 meter and the height is 1 m.

In this case, the tank is full of water, so its volume is:

[tex]V = (1/3)\pi (1^2)(1) = (1/3)\pi[/tex]

The mass of the water in the tank is its volume times its density:

[tex]m = V\rho = (1/3)\pi (1000) = (1000/3)\pi[/tex]

To pump out the water, we need to lift it to the top of the tank, which has a height of 2 meters. So the work required is:

[tex]W = mgh = (1000/3)\pi g\ J[/tex]

Where g is the acceleration due to gravity.

Therefore, it requires approximately [tex](1000/3)\pi g[/tex] Joules of work to pump all the water out of the tank.

Learn more about work:

https://brainly.com/question/28356414

#SPJ11

A student moves a 222.0 newton table by lifting it above their head in
7.0 seconds, the student is 2 meters tall. How many joules of work did
the student do?

Answers

Work = 222 cm x 2. The joule 444(J), sometimes known as the newton metre (N m), is the Si derived unit for work. The work required to move an item 2 metres with 1 N much force is measured in joules.

How much work does one joule equal?

The work performed by a force from one newton acting via one metre is equivalent to one joule, a unit of work of energy in the Internacional System of Units (SI). Its name honours English physicist William Prescott Joule and its equivalent in ergs is 107, or around 0.7377 foot-pounds.

How many newtons is one joule?

The work (or heat expended) by the a force with one newton (N) operating more than a distance of 1 m is equivalent to one joule (m). A force of one newton causes a mass of one kilogramme (kg) to accelerate by one m per second (s) every second. Thus, one joule is equivalent to one newton metre.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ1

object a is a conductor. it is neutral. it is touched by a negatively-charged, conducting sphere. when the sphere is pulled away, what charge does object a have?

Answers

Object A will have a negative charge when it is touched by a negatively charged, conducting sphere.

We need to first understand the properties of conductors and charges.

What is a conductor?

A conductor is a material that allows electric charges to flow freely through it. In other words, it has low resistance to electric current. Most metals, such as copper and aluminum, are good conductors.

What is a charge?

An electric charge is a fundamental property of matter. It is an electrical property of the atomic particles (such as electrons and protons) that make up matter. Charges can be either positive or negative.

What happens when a conductor is touched by a charged object?

When a charged object touches a conductor, the charge spreads out evenly over the surface of the conductor. This is called electrostatic induction. If the conductor is neutral, it will become charged. If the conductor is already charged, the charge will distribute itself evenly over the conductor's surface.

This happens because charges of the same type repel each other and charges of the opposite type attract each other. When the charged object is pulled away, the charge on the conductor remains.

What charge does object a have?

In this scenario, object A is a neutral conductor. When it is touched by a negatively charged sphere, the negative charge spreads out evenly over the surface of the conductor. This means that object A becomes negatively charged. When the sphere is pulled away, the negative charge on object A remains.

Therefore, the charge on object A is negative.

To know more about charges, refer here:

https://brainly.com/question/11944606#

#SPJ11

a man is marooned at rest on level frictionless ice. in desperation, he hurls his shoe to the right at 15m/s. if the man weighs 720n and the shoe weighs 4.0n, the man moves to the left with a speed of:a. b. c. d. e. ans: c

Answers

The man moves to the left with a speed of 0.084 m/s (or about 8.4 cm/s) after he throws the shoe to the right.

To solve this problem, we need to apply the law of conservation of momentum, which states that the total momentum of a system is conserved if no external forces act on it. In this case, the man and the shoe form a closed system, and their initial momentum is zero because they are at rest. After the man throws the shoe to the right, the system's momentum remains zero, but the man will move to the left to conserve the momentum.

We can use the formula for momentum, which is given by:

[tex]p = m .v[/tex]

Where p is momentum, m is mass, and v is velocity.

Before the man throws the shoe, the total mass of the system is:

[tex]m_{total} = m_{man} + m_{shoe}\\\\m_{total} = \frac{720 N}{9,81 m/s^2} + \frac{4,0 N}{9,81 m/s^2} \\\\m_{total} = 73.4 kg[/tex]

The initial momentum of the system is:

[tex]p_{initial} = m_{total} . 0\\p_{initial} = 0 kg m/s[/tex]

After the man throws the shoe, the shoe's momentum is:

[tex]p_{shoe} = m_{shoe} . v_{shoe}\\\\p_{shoe} = \frac{4,0 N}{9,81 m/s^2}. 15 m/s \\\\p_{shoe} = 6.10 kg m/s[/tex]

To conserve the momentum, the man's momentum must be equal and opposite:

[tex]p_{man} = -p_{shoe}\\p_{man} = -6.10 kg m/s[/tex]

Finally, we can solve for the man's velocity using the formula for momentum:

[tex]p_{man} = m_{man} . v_{man}\\\\v_{man} = \frac{p_{man}}{m_{man}} \\\\v_{man} = \frac{(-6).10 kg m/s}{\frac{720 N}{9,81 m/s^2} } \\\\v_{man} = -0.084 m/s[/tex]

Therefore, the man moves to the left with a speed of 0.084 m/s (or about 8.4 cm/s) after he throws the shoe to the right.

Learn more the law of conservation of momentum at: https://brainly.co.id/tugas/47557447

#SPJ11

Use a 10mH inductor to design a low-pass passive filter with a cutoff frequency of 1600rad/s. a) Specify the cutoff frequency in hertz. b) Specify the value of the filter resistor. c) Assume the cutoff frequency cannot decrease by more than 10%. What is the smallest value of load resistance that can be connected across the output terminals of the filter? d) If the resistor found in (c) is connected across the output terminals, what is the magnitude of H(jω) when ω=0 ?

Answers

Use a 10mH inductor to design a low-pass passive filter with a cutoff frequency of 1600rad/s.

a) To specify the cutoff frequency in hertz, you can use the formula:
f = ω / 2π
where f is the frequency in hertz, and ω is the frequency in radians per second.

Given the cutoff frequency of 1600 rad/s, you can calculate the frequency in hertz as follows:
f = 1600 / (2 * π) ≈ 254.65 Hz

b) To specify the value of the filter resistor, use the formula:
R = 1 / (ω * L)
where R is the resistor value, ω is the cutoff frequency in rad/s, and L is the inductor value.

Given the cutoff frequency of 1600 rad/s and an inductor value of 10mH (0.01 H), the resistor value can be calculated as follows:
R = 1 / (1600 * 0.01) ≈ 0.0625 Ω

c) To find the smallest value of load resistance that can be connected across the output terminals of the filter without decreasing the cutoff frequency by more than 10%, you can use the following formula:

R_ load_ min = R / ((1 - 0.9) * (1 + 0.9))
Given the resistor value calculated in (b) is 0.0625 Ω:
R_ load_ min = 0.0625 / ((1 - 0.9) * (1 + 0.9)) ≈ 3.125 Ω

d) If the resistor found in (c) is connected across the output terminals, the magnitude of H(jω) when ω=0 can be calculated using the formula:
H(jω) = R_ load / (R + R_ load)

Given the resistor values calculated in (b) and (c):
H(jω) = 3.125 / (0.0625 + 3.125) ≈ 0.9804

So, the magnitude of H(jω) when ω=0 is approximately 0.9804.

To know more about frequency in hertz  here :

https://brainly.com/question/19614632

#SPJ11

How is communication important in a science experiment?
(simple but detailed answer)

Answers

In order to ensure that everyone on the team is aware of the goals, rules, and steps involved in the science experiment, communication is crucial. It permits the transparent exchange of information and thoughts.

Why is dialogue crucial in experiments?

The chance to get input from stakeholders, experts, and other people with a professional or academic interest in the topic is provided by the presentation of your research findings.

Why is dialogue a crucial component of the science process?

Science gains support, understanding of its broader relevance to society is promoted, and it encourages more informed decision-making at all levels, from government to communities to individuals, when scientists are able to effectively communicate outside of their peer group.

To know more about science experiment visit:-

https://brainly.com/question/23064221

#SPJ1

when a particle is located a distance meters from the origin, a force of newtons acts on it. find the work done in moving the particle from to . find the work done in moving the particle from to . find the work done in moving the particle from to .

Answers

When a particle is located a distance 2 meters from the origin, a force of 4 newtons acts on it.

The work done in moving the particle from A to B is 16J

The work done in moving the particle from B to C is -8J

The work done in moving the particle from C to D is 8J

Force F = 4N

Displacement dx = 2m

Total displacement of the particle from point A to B is dAB = 4m.

Work done is given by: W = F.dx (cosθ)  

Where,θ is the angle between the force and displacement.

1. Work done in moving the particle from A to B:

Let the particle is located at point A (x = 0). The force F acts in the positive direction of the x-axis. Therefore, the angle between the force and displacement is 0°.The work done in moving the particle from point A to B is

WAB = F(dx) cosθ

= (4 N)(4m) cos 0°

= (4 N)(4m)

= 16 J

2. Work done in moving the particle from B to C:

The displacement of the particle from B to C is dBC = 2m.

Therefore, the total displacement of the particle from point A to C is

dAC = dAB + dBC

=4m + 2m = 6m.

The force F acts in the negative direction of the x-axis. Therefore, the angle between the force and displacement is 180°.The work done in moving the particle from point B to C is

WBC = F(dx) cosθ

= (4 N)(2m) cos 180°

= (4 N)(-2m)

= -8 J

Note: Here, cos 180° = -1.

3. Work done in moving the particle from C to D:

Let the particle is located at point D (x = 6m).

The force F acts in the positive direction of the x-axis. Therefore, the angle between the force and displacement is 0°.

The work done in moving the particle from point C to D is WCD = F(dx) cosθ

= (4 N)(2m) cos0°

= (4 N)(2m)

=8J

Therefore, the work done in moving the particle from A to B is 16 J, the work done in moving the particle from B to C is -8 J, and the work done in moving the particle from C to D is 8 J.

To know more about work, force and distance refer here:

https://brainly.com/question/4095205#

#SPJ11

what is the horizontal distance of the center of gravity of the person-ladder system from the point where the ladder touches the ground? express your answer with the appropriate units.

Answers

The person-ladder system's centre of gravity is located 0.3 metres horizontally from the point where the ladder hits the ground.

What is the centre of gravity exactly?

The average position of an object's weight is known as its centre of gravity. Any object's travel through space may be entirely explained in terms of how its centre of gravity moves from one location to another.

According to the principle of moments, the total of the clockwise and anticlockwise moments is equal. In this instance, we could type:

[tex]W1 * d1 = (W1 + W2) * x[/tex]

We know that the total of the vertical forces acting on the ladder and the person is zero since they are both in equilibrium. Hence, we may write:

W1 + W2 = F

where F is the system's weight multiplied by the vertical force exerted on the ladder-person arrangement.

The two equations together give us:

W1 * d1 = F * x

Solving for x, we get:

x = (W1 * d1) / F

W1 = 200 N

W2 = 600 N

F = W1 + W2 = 800 N

we can see that d1 = 1.2 m and d3 = 0.8 m. Therefore:

x = (W1 * d1) / F = (200 N * 1.2 m) / 800 N = 0.3 m

To know more about gravity visit:-

https://brainly.com/question/14874038

#SPJ1

The center of gravity for the person-ladder system is 0.3 meters away from where the ladder touches the ground.

The sum of the clockwise and anticlockwise moments is equal, as per the moments' principle.

W1 × d1 = (W1 + W2)

Since the ladder and the person are both in equilibrium, we know that the sum of the vertical forces acting on them is zero. So, we may say:

W1 + W2 = F

Where F is the system's weight multiplied by the vertical force exerted on the ladder-person arrangement.

The two equations together give us:

W1 × d1 = F × x

Solving for x, we get:

x = (W1 × d1) / F

W1 = 200 N

W2 = 600 N

F = W1 + W2 = 800 N

d1 = 1.2 m and d3 = 0.8 m.

Therefore:

x = (W1 × d1) / F

= (200 N × 1.2 m) / 800 N

Distance = 0.3 m

Learn more about gravity, here:

https://brainly.com/question/31321801

#SPJ6

a 92 kg man lying on a surface of negligible friction shoves a 75 g stone away from himself, giving it a speed of 4.0 m/s. what speed does the man acquire as a result?

Answers

The required speed of the man when mass and speed of the stone are specified is calculated to be 0.00326 m/s.

Mass of the man is given as M = 92 kg.

Mass of the stone is given as m = 75 g = 0.075 kg.

Speed of the stone is given as u = 4 m/s.

Speed of the man is to be found out, v = ?

Using the conservation of momentum, we have,

The initial velocities of the man and the stone is zero(V).

So, mathematically,

(M+m)V = M v + m u

(M+m) × 0 = 92 × v + 0.075 × 4

92 × v + 0.3 = 0

92 v = - 0.3

v = - 0.00326 m/s

Thus, the speed of the man is calculated to be 0.00326 m/s.

To know more about speed:

https://brainly.com/question/14531812

#SPJ4

What is responsible for the weather changes on Earth?

Answers

Answer: Geological records show that there have been a number of large variations in the Earth's climate. These have been caused by many natural factors, including changes in the sun, emissions from volcanoes, variations in Earth's orbit and levels of carbon dioxide (CO2).

For a shorter answer: changes in the sun, emissions from volcanoes, variations in Earth's orbit and levels of carbon dioxide (CO2).

A softball has kinetic energy of 81 j as it flies across home plate at a velocity of 30 m/s. calculate the mass of the softball.

Answers

A softball weighs 0.18427 kg. Its average rebound height on concrete, grass, and wood is 80.8 cm, 75.3 cm, or 87.6 cm, respectively. Kinetic energy 81 multiplied by a speed of 30 m/s and mass equals 2430.

What is mass, for instance?

The amount of matter inside an item is referred to as mass in mathematics. The most common way to determine mass is to weigh something. Anything will weigh more the more matter it contains. For instance, a mouse will have a higher mass than an ant since it contains more stuff.

Of what mass?

The quantity of substance contained within an item is expressed in terms of mass. Typically, mass is expressed in kilogrammes (kg) or grammes (g) (kg). No matter where in the cosmos it is or how much gravitational force is exerted on it, mass is a measure of how much matter there is.

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ1

how does the terminal velocity depend on the drag force? is the relationship linear or nonlinear? explain your responses.

Answers

The terminal velocity depends directly on the drag force and the relationship between them is nonlinear.

The terminal velocity is the maximum velocity that a falling object can reach when the drag force of the surrounding fluid is equal to the gravitational force acting on the object. The drag force is dependent on the velocity of the object, and as the velocity increases, the drag force also increases.

However, the relationship between the drag force and velocity is nonlinear because the drag force is proportional to the square of the velocity. This means that as the velocity of the object increases, the drag force increases more rapidly. Therefore, the terminal velocity, which is the point at which the drag force balances the gravitational force, is reached when the nonlinear relationship between the drag force and velocity is balanced by the gravitational force.

To know more about velocity, here

brainly.com/question/14304469

#SPJ4

A car of mass 1100kg moves at 24 m/s. What is the braking force needed to bring the car to a halt in 2. 0 seconds? N

Answers

The braking force needed to bring the car to a halt in 2.0 seconds, given that the car has amass of 1100 Kg and was moving at 24 m/s is -13200 N

How do i determine the braking force needed?

We'll begin our calculation by obtaining the deceleration of the car. This is shown below:

Initial velocity (u) = 24 m/sFinal velocity (v) = 0 m/sTime (t) = 2 secondsDeceleration of car (a) =?

a = (v - u) / t

a = (0 - 24) / 2

a = -24 / 2

a = -12 m/s²

Haven obtained the deceleration, we shall determine the breaking force needed to halt the car. Details below:

Mass (m) = 1100 KgDeceleration (a) = -12 m/s²Breaking force (F) =?

Force = mass × deceleration

Breaking force = 1100 × -12

Breaking force = -13200 N

Thus, the breaking force needed to stop the car is -13200 N

Learn more about force:

https://brainly.com/question/12163222

#SPJ1

As you found in Part A, your weight will be greater than normal when the elevator is moving upward with increasing speed. For what other motion would your weight also be greater than your normal weight?
The elevator moves downward while slowing in speed.

Answers

In the other motion,  your weight also be greater than your normal weight if the elevator moves downward while slowing in speed, then the weight of the person would also be greater than the normal weight.

What is the normal force of an object?

The normаl force is the perpendiculаr force thаt opposes the weight of аn object in contаct with а surfаce. The normаl force equаls the object's weight only in situаtions where the object is directly on а horizontаl surfаce or the incline аngle is 0 degrees.

The force exerted by аn object perpendiculаr to а surfаce thаt prevents the object from sinking into the surfаce is referred to аs the normаl force. When аn object is plаced on а surfаce, the surfаce responds by exerting а force thаt is perpendiculаr to the object's weight. Аnother motion thаt would аlso result in your weight being greаter thаn your normаl weight is when the elevаtor moves downwаrd while slowing in speed. This occurs due to the аccelerаtion of the person within the elevаtor.

Learn more about normаl force:

https://brainly.com/question/15000546

#SPJ11

a 5.0 gram piano wire spans 44.0 cm. to what tension must this wire be stretched to ensure that its fundamental mode vibrates at the d4 note (f = 293.7 hz)? (enter your answer in in n.)

Answers

Tension required to make the 5.0 gram piano wire vibrate at the D4 note is approximately 268,679.21 N.

Let's discuss it further below.

To find the tension required to make a 5.0 gram piano wire with a length of 44.0 cm vibrate at the D4 note (f = 293.7 Hz), follow these steps:

1. Convert the given mass and length to SI units.
Mass (m) = 5.0 g = 0.005 kg
Length (L) = 44.0 cm = 0.44 m

2. Use the formula for the fundamental frequency of a vibrating string:
f = (1/2L) * sqrt(T/μ), where T is the tension and μ is the linear mass density.

3. Calculate the linear mass density (μ) using the given mass and length:
μ = m / L = 0.005 kg / 0.44 m = 0.01136 kg/m

4. Rearrange the formula for the fundamental frequency to solve for tension (T):
T = (2L * f)² * μ

5. Plug in the values and calculate the tension:
T = (2 * 0.44 m * 293.7 Hz)² * 0.01136 kg/m
T = (517.968)² * 0.01136 kg/m
T = 268679.21 N

Therefore, the tension required to make the 5.0 gram piano wire vibrate at the D4 note is approximately 268,679.21 N.

Learn more about mass density (μ).

brainly.com/question/14485913

#SPJ11

A motor moves a belt that is attach to an axle of a solid flywheel. The radius of the axle r = 3.25 cm and the radius of the larger solid flywheel is R = 27.4 cm. What is the tangential velocity of the outer edge of the fly wheel assuming the belt has linear velocity of 45.0 m/s?​

Answers

Explanation:

We can start by using the fact that the linear velocity of the belt is equal to the tangential velocity of the flywheel at the point where the belt contacts it. We can use this to find the tangential velocity of the outer edge of the flywheel using the ratio of the radii.

Let's call the tangential velocity of the outer edge of the flywheel "v". Then we have:

v / 45.0 m/s = R / r

where R is the radius of the flywheel and r is the radius of the axle. We can rearrange this to solve for v:

v = (45.0 m/s) * (R / r)

Substituting in the given values for R and r, we get:

v = (45.0 m/s) * (27.4 cm / 3.25 cm)

Converting the radius to meters:

v = (45.0 m/s) * (0.274 m / 0.0325 m)

Simplifying:

v = 379.6 m/s

Therefore, the tangential velocity of the outer edge of the flywheel is approximately 379.6 m/s

Two balls, each with a mass of 0. 5 kg, collide on a pool table. Is the law of conservation of momentum satisfied in this collision? Explain why or why not

Answers

In the given collision scenario, the law of conservation of momentum is not satisfied, indicating the idealized nature of perfectly elastic collisions.

To determine whether the law of conservation of momentum is satisfied in this collision, we need to calculate the total momentum of the system before and after the collision and see if they are equal.

If we assume that the two balls are moving in opposite directions with the same speed, then their momenta before the collision are:

p₁ = m₁v₁ = (0.5 kg)(v) and p₂ = m₂v₂ = -(0.5 kg)(v)

where v is the speed of the balls, and the negative sign for p₂ indicates that it is in the opposite direction.

The total momentum before the collision is:

p_before = p₁ + p₂ = (0.5 kg)(v) - (0.5 kg)(v) = 0

This means that the total momentum of the system before the collision is zero.

After the collision, the two balls will stick together and move with a common speed. Let's assume that their final speed is v_f.

The total momentum after the collision is:

p_after = (m₁ + m₂)*v_f = (0.5 kg + 0.5 kg)v_f = 1 kgv_f

Since the two balls stick together and move with a common speed, the momentum is conserved and the total momentum after the collision is equal to the total momentum before the collision:

p_before = p_after = 0 = 1 kg*v_f

This is a contradiction, as there is no value of v_f that satisfies this equation. Therefore, the law of conservation of momentum is not satisfied in this collision.

In reality, the collision between the two balls would not be perfectly elastic, and some energy would be lost to friction and other factors. This would result in a partial loss of momentum, and the law of conservation of momentum would be approximately satisfied, but not exactly.

Learn more about mass here: brainly.com/question/19694949

#SPJ4

what is the frequency of a wave that travels 20 m/s with a wavelength of 200 meters?

Answers

The frequency of a wave is the number of cycles it completes in a given period of time, and it can be calculated using the following equation: frequency = velocity/wavelength. In the case of this wave, the frequency is 0.1 Hz (or 10 cycles/second).



frequency = 20 m/s/200 m = 0.1 Hz
The frequency of a wave that travels at 20 m/s with a wavelength of 200 meters is 0.1 Hz.What is frequency?Frequency is the number of occurrences of a periodic event per unit of time. It is commonly used to determine the number of occurrences of a specific event in a given period of time.

The frequency equation is:f = v/λwhere:f is the frequency of the  v is the velocity of the wave (m/s)λ is the wavelength of the wave (m)Using the formula given above:f = v/λwherev = 20 m/sλ = 200 metersf = 20/200f = 0.1 HzTherefore, the frequency of the wave is 0.1 Hz.

For more such questions on wave

https://brainly.com/question/29979534

#SPJ11

an empty parallel plate capacitor is connected between the terminals of a 6.33-v battery and charges up. the capacitor is then disconnected from the battery, and the spacing between the capacitor plates is doubled. as a result of this change, what is the new voltage between the plates of the capacitor?

Answers

The new voltage between the plates of the capacitor in the terminals of a 6.33-V battery is 6.33-V.


The voltage between the plates of the capacitor will remain the same after the spacing between the plates is doubled. This is because the voltage of a capacitor is determined solely by the amount of charge stored in the capacitor. Increasing the spacing between the plates does not change the charge stored on the capacitor, so the voltage between the plates stays the same.

In this case, the new voltage between the plates of the capacitor would remain at 6.33-V.

Learn more about voltage at https://brainly.com/question/24858512

#SPJ11

4. how many kwh of energy could be generated by a coal burning power plant that burned 250 tons of coal and was 40% efficient?

Answers

A coal-burning power station that burned 250 tonnes of coal and also was 40% efficient could produce 7.3E5 kWh of energy. 0.89 kWh/pound for coal. 0.14 kWh/cubic foot for natural gas.

How is one kWh produced?

A power over 1 kW in use for 1 hour is equal to 1 kWh, as are powers of 05 kW used for two h, 2 kW used for 05 hours, etc. 1 k W h is equal to 1 kilowatt multiplied by 1 hour, 1000 watts, 3600 seconds, or 3,600,000 watt-seconds, or joules.

1 kilogramme of coal equals how many kWh?

The calorific value for hard coal, which varies depending on the type, is somewhere between 29.3 MJ/kg (fuel coal) and 33.5 MJ/kg. One kilogramme of coal is equal to 7,000 kilocalories (7,000 kwh 29.3 MJ 8.141 kWh) (anthracite).

To know more about natural gas visit:

https://brainly.com/question/230927

#SPJ1

The coal-burning power plant could generate 667 kWh of energy.

What is Energy?

Energy is the ability to do work, and it comes in many different forms. It can be in the form of mechanical energy, thermal energy, electrical energy, electromagnetic radiation, or nuclear energy, among others. Energy can be converted from one form to another, but it cannot be created or destroyed, only transferred or transformed.

To calculate the energy generated by the coal-burning power plant, we need to use the following formula:

Energy Generated = Efficiency x Energy Content x Amount of Coal Burned

Efficiency is given as 40%, which can be converted to a decimal by dividing by 100:

Efficiency = 40% = 0.40

The energy content of coal varies depending on the type of coal, but a reasonable estimate is around 24 megajoules per kilogram (MJ/kg). To convert this to kilowatt-hours (kWh), we need to divide by 3.6 million (the number of joules in a kWh):

Energy Content = 24 MJ/kg / 3.6 million = 0.00667 kWh/kg

The amount of coal burned is given as 250 tons, which can be converted to kilograms by multiplying by 1000:

Amount of Coal Burned = 250 tons x 1000 kg/ton = 250,000 kg

Now we can substitute these values into the formula:

Energy Generated = 0.40 x 0.00667 kWh/kg x 250,000 kg

Energy Generated = 667 kWh

Learn more about Energy from the given link

https://brainly.com/question/13881533

#SPJ1

Other Questions
long-term contracts: are preferable to vertical integration when it is not feasible to exchange hostages. are preferable to short-term contracts when there is a minimal need for cooperation. generally result in lower prices than competitive bidding. are a low-cost alternative to vertical integration when it is possible to build cooperative relationships with suppliers. achieve the same outcomes as vertical integration, but they incur higher bureaucratic costs. America and the Great DepressionHow was America affected by the Great Depression? Include information on Americas change in GDP, unemployment rates, national debt, and effects on its international trade (both import and export). When did America start to recover from the Great Depression, and what were the changes that brought about this recovery? Cite specific programs, laws, individuals, executive orders, and so on that were primarily responsible. QUESTION 1There are three errors in this citation. Make the corrections and write your response in the box below.Hughes, Langston. Salvation. 50 Essays: A Portable Anthology, edited by Samuel S. Cohen,Bedford/St. Martin's, 2020.For the toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac). on april 25, foreman electric installs wiring in a new home for $3,500 on account. however, on april 27, foremans electrical work does not pass inspection, and foreman grants the customer an allowance of $600 because of the problem. the customer makes full payment of the balance owed, excluding the allowance, on april 30.Required:1. Record the credit sale on April 25.2. Record the sales allowance on April 27.3. Record the cash collection on April 30.4. Calculate net sales associated with these transactions. Convert to polar form y=4x^2 If the simple interest on 5000 dollars for 5 years is 2000 dollars the what is the interest rate Following the failure of his business, Mr. Jones disappeared and was discovered two years later in another state practicing law without a license. When questioned, he responded that he had found himself in a strange city and could not remember any personal information. - dissociative identity disorder- dissociative fugue- dementia- bipolar which process can companies use to make corrections for differences between their jobs and external benchmark jobs? a stock price is currently $20. suppose that at the end of 3 months it will be either $22 or $18. the risk-free interest rate is 4% per annum with continuous compounding. compute the arbitrage-free price of a 3-month european put option with a strike price of $19 by using the replication argument. Which of the following describes buying insurance? (1 point)O The premium is a cost that would be higher if the likelihood of the loss were lower.O A premium is a benefit that the insured receives from the insurer.O A premium is a cost that increases if the risk of a financial loss increases.O A copayment is a benefit that might increase if the premium is decreased. working memory is the memory system that holds information while actively manipulating the information. (true or false) a skateboarding ramp is 16 in. high and rises at an angle of 13 degrees. How long is the base of the ramp? Round to the nearest inch. Find the polynomial that multiplied to 32is equal to 124 621a) Show your work below to demonstrate how to obtain the polynomialPLEASE HELP I NEED TO PASS THIS help me pleaseA car was valued at $44,000 in the year 1992. The value depreciated to $15,000 by the year 2006.A) What was the annual rate of change between 1992 and 2006?r=---------------Round the rate of decrease to 4 decimal places.B) What is the correct answer to part A written in percentage form?r=---------------%C) Assume that the car value continues to drop by the same percentage. What will the value be in the year 2009 ?value = $ -----------------Round to the nearest 50 dollars. -1/2(32x-40)+(20x-4) Provide a condensed structure for the following compound.(I just need help with #6, sorry for the bad picture!) What should be done to make Nepal really a beautiful garden ? 1 ) Nepal is a small country with the large physical diversity. 2) By following the religious of other people. 3) By respect the other languages, and caste. 4) Every caste of Nepal has developed their distinctive lifestyle and cultural. All Victor ever wanted to do with his life was be a singer. He didn't pay attention in school, and he spent all his time at home listening to music and impersonating his idols. His mother tried to teach him the value of getting an education and having a backup plan. But Victor would respond the same way every time, "Mom, I won't need to know any of that boring old stuff when I'm famous. You'll see." There was one major problem with Victor's plan: he wasn't any good at singing. Victor enjoyed singing so much that he didn't notice the pained look on the faces of those who endured his singing. Some lied to him and said they liked his singing. Other people told him to find something else to do with his life. Victor accused those people of being "jealous haters" and ignored their advice. Soon Victor dropped out of high school to focus on his music career. The years passed and the doors never opened. What is the theme of this story? the cisa credential is promoted by isaca as the certification that is appropriate for all but which type of professionals? a. accounting b. auditing c. security d. networking where do our rights come from? a. the federal government b. god, whatever that means to you; from the fact that you are a human being; a higher authority than government c. the united nations declaration on human rights d. the u.s. constitution e. the use of force to solve collective action problems