HELP!!! CHEMISTRY QUESTION NEED ANSWERED QUICKLY!!!

(Picture attached)

The forward reaction for Reaction B is...
- endothermic
- exothermic

If Reaction B was at equilibrium and then was heated ______ CH3OH would be present after the reaction adjusts to the new temperature.
- more
- less
- the same amount of

If Reaction B was at equilibrium and then H2 was added, _____ CH3OH would be present after the reaction adjusts.
- more
- less
- the same amount of

If Reaction B was at equilibrium and then H2 was added, _____ CO would be present after the reaction adjusts.
- more
- less
- the same amount of

Considering the Dalton's partial pressure, the total pressure in the flask is 5.4 atm.

The pressure exerted by a particular gas in a mixture is known as its partial pressure.

Dalton establishes that, at a stable temperature, the total pressure of a mixture of gases that do not chemically react with each other is equal to the sum of the partial pressures that each of its components would exert:

[tex]P_{T}[/tex]=P₁ + P₂ + ... + Pₙ

where n is the amount of gases present in the mixture.

This relationship is due to the assumption that there are no attractive forces between the gases.

In this case , you know:

The total pressure in the flask is calculated as:

[tex]P_{T}[/tex]=[tex]P_{H_{2} }[/tex] + [tex]P_{O_{2} }[/tex]

Substituting the corresponding values:

[tex]P_{T}[/tex]=3.6 atm + 1.8 atm

Solving:

[tex]P_{T}[/tex]=5.4 atm

Finally, the total pressure is 5.4 atm.

Learn more about Dalton's partial pressure:

brainly.com/question/30263250

#SPJ1

When you apply a force to a rubber band, it changes shape and then returns to its previous shape when you remove the force.

It is solid in nature, but because to the elastic nature of the rubber band, it may change shape when force is applied. For modest applied forces, the stretching action of rubber bands follows Hooke's Law, F=k x.

The limit of force for which the rubber band obeys Hooke's law is determined by the band's physical parameters, such as cross-sectional area. The stronger the attraction, the longer it lasts. In other words, a greater force causes the rubber band to stretch further.

Learn more about parameters,

https://brainly.com/question/30757464

#SPJ1

Answer:by brig correct

Explanation:

Answer:

In order to determine the relative humidity from dry-bulb and wet-bulb thermometer readings, we need to use a psychrometric chart or a calculation based on the difference between the two temperatures.

In this case, the dry-bulb temperature and the wet-bulb temperature are the same (66°F). This indicates that the air is fully saturated with water vapor, meaning that the relative humidity is 100%.

When the dry-bulb and wet-bulb temperatures are the same, the air is said to be at its dew point temperature. At this temperature, the air is holding as much moisture as it can, and any additional cooling will cause condensation to occur. This is why surfaces can become covered in dew when the temperature drops at night.

In summary, when the dry-bulb temperature and the wet-bulb temperature are the same, the air is fully saturated with water vapor and the relative humidity is 100%.

According to IUPAC nomenclature, the longest chain of this compound contains 7 carbons. Hence, the name of this compound is 4 -propyl-5-ethyl-5-phenyl heptane.

IUPAC rules are used to name the organic compounds. As per this rule, the compound is named based on the chain containing highest number of carbon atoms. The substituents are named with their prefix or suffix.

For the given compound, the longest chain contains 7 carbon atoms. Hence, the chain is named as heptane. The substituents are numbered in such a way that, they have the least possible number.

The 4th carbon contains a propyl group and a phenyl group and ethyl groups are attached on the 5th position in the longest chain. Therefore, the name of the compound is  4 -propyl-5-ethyl-5-phenyl heptane.  

Find more on IUPAC rules:

https://brainly.com/question/27915542

#SPJ1

The given statement is false . Halley's comet takes 5 years to complete an orbit.

A comet that shines especially brightly is a superb comet. Big comets typically arrive once every ten years, at random, erratic periods.

This translates to a circumference of the solar orbit of around 7.6 billion miles. The gravitational pull of the planets causes the period to change from appearance to appearance.

Because Halley was the first comet to show astronomers that comets might return to our night skies repeatedly, it is frequently referred to as the most famous comet. The comet's appearances have now been connected by astronomers to observations made more than 2,000 years ago.

To know more about comet

https://brainly.com/question/12443607

#SPJ4

The complete question is

Halley's comet takes 5 years to complete an orbit. true or false.

Answer: As an example, we can decompose copper carbonate into its constituent elements, copper, oxygen, and carbon, weighing each and taking the ratios of these masses. The result is that every sample of copper carbonate is 51.5% copper, 38.8% oxygen, and 9.7% carbon.

Explanation:

The mass of 6.45 x 10^25 atoms of Cu is 682.3 grams. For example, the atomic weight of carbon is 12.011, so the molar mass of carbon is 12.011 g/mol.

What is Molar Mass?

Molar mass is the mass of one mole of a substance, expressed in grams per mole (g/mole). It is a fundamental concept in chemistry and is used in various calculations, such as determining the mass of a sample of a substance, the number of moles in a sample, or the number of atoms or molecules in a sample.

The molar mass of an element is equal to its atomic weight, which is the weighted average of the masses of all the isotopes of that element, taking into account their relative abundance.

Determine the number of moles of Cu atoms:

6.45 x 10^25 atoms Cu x (1 mole Cu / 6.022 x 10^23 atoms Cu) = 10.73 mol Cu

Use the molar mass of Cu to convert from moles to grams:

10.73 mole Cu x (63.55 g Cu / 1 mole Cu) = 682.3 g Cu

Therefore, the mass of 6.45 x 10^25 atoms of Cu is 682.3 grams.

Learn more about Molar Mass from given link

https://brainly.com/question/30459969

#SPJ1

Answer:

7.08 moles

Explanation:

To find the number of moles of copper in 450 grams, we need to divide the given mass by the molar mass of copper.

The molar mass of copper can be found on the periodic table, and it is approximately 63.55 grams per mole.

So, the number of moles of copper in 450 grams is:

450 grams / 63.55 grams per mole = 7.08 moles

It should be 0.789 moles because we started with 28.8 g x 1 mol/36.5 g = 0.789 moles

Answer:

Silicate minerals are the most common of Earth's minerals and include quartz, feldspar, mica, amphibole, pyroxene, and olivine. Silica tetrahedra made up of silicon and oxygen, form chains, sheets, and frameworks, and bond with other cations to form silicate minerals.

Explanation:n

The compound is an acid

H2SO4, or sulfuric acid, is an acid because it donates protons (H+ ions) in aqueous solution. When H2SO4 is dissolved in water, it dissociates into hydrogen ions (H+) and sulfate ions (SO4 2-).

The hydrogen ions are the source of the acidity in the solution, as they can react with water molecules to form hydronium ions (H3O+). The hydronium ions are responsible for the characteristic sour taste and corrosive properties of acids.

Sulfuric acid is used in a wide range of industrial processes, including the production of fertilizers, detergents, and chemicals.

Learn more about acid:https://brainly.com/question/14072179

#SPJ1

1)  The troposphere is cool while the stratosphere, mesosphere and the thermosphere are hot.

2) The ozone layer is in the stratosphere

3) The ionosphere is in the thermosphere.

This is the lowest layer of the atmosphere, extending from the Earth's surface up to about 7-20 kilometers (4-12 miles) depending on the location. This is where weather occurs, and it is where we live and breathe. Temperature decreases with height in the troposphere.

The thermosphere is the fourth layer of the atmosphere, extending from about 85-600 kilometers (53-373 miles) above the Earth's surface. This layer is characterized by high temperatures due to absorption of solar radiation, and it is also where the auroras occur.

Learn more about atmosphere:https://brainly.com/question/26767532

#SPJ1

Chemical bonds involve the interaction between nuclei and electrons. Option D.

Chemical bonds are formed through the interaction between atoms, where electrons in the outermost energy level (valence electrons) are shared, gained or lost between atoms.

This results in the formation of a more stable compound. In these interactions, the positively charged nucleus of each atom attracts the negatively charged electrons of the other atom, creating a bond.

The strength of the bond is determined by the distance between the nuclei and the number of electrons shared between them.

More on chemical bonds can be found here: https://brainly.com/question/15444131

#SPJ1

As a result of friction, kinetic energy is converted into thermal energy, which lowers velocity as a byproduct.

Motion is a characteristic of moving objects. Our daily lives involve a lot of motion, a phenomenon. For instance, the vehicle you are currently in moves, as does the universe, the planet, the air we breathe, the blood in our veins, and a host of other things.

The total force acting on an item determines its motion; if that total force is not zero, the object will move in a different direction. More mass means the object is heavier.

To know more about Motions visit:

https://brainly.com/question/22810476

#SPJ1

At 824.1 torr + 55.9°C, dry butane has a of 0.937 L. The basic formula for size is length, breadth, and height, as volume opposed to length, width, and height for the surface of a rectangular shape.

Any three-dimensional solid's volume is the area it takes up. The shapes of these solids include cubes, cuboids, cones, cylinders, and spheres. Forms come in a wide range of volumes.

Volumes will be calculated using three different techniques: geometrically (measured lengths); water displace; and pycnometry, to demonstrate the effects of precision on data.

To know more about volume visit:

https://brainly.com/question/29884686

#SPJ1

Both releasing HCl, CO, and phosgene gas into the air and releasing vinyl chloride can have harmful effects on the environment and human health.

What is high concentration ?

High concentration refers to a large amount or a high proportion of a substance in a given mixture or environment. The specific threshold for what constitutes a high concentration depends on the context and the particular substance involved.

What is EPA ?

The Environmental Protection Agency (EPA) is an independent agency of the United States federal government, established in 1970 to protect human health and the environment. The EPA is responsible for setting and enforcing regulations related to air and water quality, waste management, hazardous materials, and other environmental issues.

To know more about phosgene gas visit:-

https://brainly.com/question/14887665

#SPJ1

Answer:

it is 6E23 moles

Explanation:

The type of chemical reaction of ammonia + oxygen -> nitric acid + water is a combustion reaction.

The chemical reaction between ammonia (NH₃) and oxygen (O₂) to form nitric acid (HNO₃) and water (H₂O) is an oxidation-reduction reaction, specifically a combustion reaction.

The balanced chemical equation for this reaction is:

4NH₃ + 5O₂ → 4NO + 6H₂O

followed by the oxidation of NO to form NO₂ and then the formation of nitric acid by the reaction of NO₂ with water:

2NO + O₂ → 2NO₂

3NO₂ + H₂O → 2HNO₃ + NO

So, while the overall reaction involves oxidation and reduction, the formation of nitric acid involves an acid-base reaction.

Learn more about chemical reaction here: https://brainly.com/question/25769000

#SPJ1

As per the result, the reaction's percent yield is about 38.4%.

The % ratio of the actual yield to the theoretical yield is referred to as percent yield. We must compare the actual yield with the theoretical yield in order to determine the percent yield of a reaction.

The balanced chemical equation for the reaction between hydroiodic acid (HI) and magnesium bromide ([tex]MgBr_2[/tex]) is as follows:

[tex]MgI_2 + 2HBr ----- > MgBr_2 + 2HI[/tex]

This equation shows that when 1 mole of[tex]MgBr_2[/tex] is combined with 2 moles of HI, 1 mole of MgI2 and 2 moles of HBr are created. With this knowledge, we can determine the theoretical yield of HBr that ought to have been attained given the quantity of [tex]MgBr_2[/tex] used:

MgBr2 moles are equal to mass/molar mass, which is 24.5 g/184.11 g/mol, or 0.133 moles.

0.266 moles of HBr are equal to 2 moles of [tex]MgBr_2[/tex] multiplied by 0.133 moles.

0.266 moles of HBr times a molar mass of 80.91 g/mol results in 21.47 g of HBr mass.

Hence, 21.47 g is the theoretical yield of HBr.

8.23 g of HBr were really produced during the experiment.

So, we can determine the % yield as follows:

(Actual Yield / Theoretical Yield) x 100% Equals percent yield

percent yield = (8.23 g / 21.47 g) x 100%

percent yield = 38.4%

Thus, the percent yield of the reaction is approximately 38.4%.

Learn more about Percent yield, here:

https://brainly.com/question/17042787

#SPJ1

1 and 2 are oxidation reactions.

An oxidation reaction is a type of chemical reaction that involves the transfer of electrons from one substance to another. Oxidation reactions are characterized by an increase in the oxidation state of a molecule, atom, or ion, resulting in a loss of electrons.

The substance that loses electrons is said to be oxidized, while the substance that gains electrons is said to be reduced.

Oxidation reactions play important roles in many chemical and biological processes, including energy production, metabolism, and corrosion.

Learn more about oxidation reaction:https://brainly.com/question/19528268

#SPJ1

Answer: 2.67 moles KCl.

Explanation:

4 moles O2 X 2 moles KCl / 3 moles O2 =2.67

Answer:

B) increases

Explanation:

The ozone hole over Antarctica is created in the spring where there are more polar stratospheric clouds.

What is an ozone hole and how is it caused?

The ozone hole refers to a thinning of the protective layer of ozone in the Earth's stratosphere, which can lead to increased levels of harmful ultraviolet radiation reaching the Earth's surface.  Ozone depletion is caused by the release of man-made chemicals called chlorofluorocarbons (CFCs), which are commonly used in refrigerants, air conditioners, and aerosol sprays. When CFCs are released into the atmosphere, they rise into the stratosphere, where they are broken down by the sun's ultraviolet radiation. This process releases chlorine and other chemicals, which can react with ozone molecules, breaking them apart and depleting the ozone layer.

The ozone hole over Antarctica is created in the spring (August to October) where there are more polar stratospheric clouds (PSCs) formed due to extremely cold temperatures. These clouds provide a surface for chemical reactions involving human-made chlorine and bromine gases, which destroy ozone molecules in the stratosphere.

Therefore, The ozone hole over Antarctica is created in the spring where there are more polar stratospheric clouds.

To learn more about ozone hole the link

https://brainly.com/question/520639

#SPJ1

Plant cells have large, round vacuoles they primarily use for water storage so that will be option A.

A vacuole is a membrane-bound organelle found in plant, fungus, and animal cells, as well as certain protist, animal, and bacterial cells. Vacuoles are simply confined compartments filled with water holding inorganic and organic molecules in solution, including enzymes, while in certain situations they may also include solids that have been absorbed.

Vacuoles are generated by the fusing of several membrane vesicles and are just bigger versions of these. The organelle has no fixed form or size; its structure changes depending on the needs of the cell.

The role and relevance of vacuoles vary substantially depending on the kind of cell in which they are found, with plants, fungi, and some protists having far more prominence than animals and bacteria. In general, the vacuole performs the following functions:

Learn more about Vacuoles:

https://brainly.com/question/3109110

#SPJ4

Complete question:

Plant cells have large, round vacuoles they primarily use for -

A) water storage

B) energy production.

C) protein synthesis.

D) waster removal

Answer:

25.0 grams of propane (C3H8) reacts with 25.0 grams of oxygen according to the following equation: C3H8 (g) + 5O2 (g) arrow 3CO2 (g) +...

Explanation:

Milk has a pH of roughly 6.60.

The following equation, pH = log [H+], which refers to the molar hydrogen ion concentration, gives the definition of pH. You'll see that to get pH, we must use the common (base 10) logarithm of the hydrogen ion concentration.

The formula for calculating pH is: pH = -log[H+]

where [H+] is the concentration of hydrogen ions (also known as hydronium ions) in moles per liter.

Given that the [H+] in a liter of milk is about 2.51 × 10–7, we can calculate the pH as follows:

pH = -log(2.51 × 10–7)

pH = -log(2.51) - log(10–7) (using the logarithmic rule that log(ab) = log(a) + log(b))

pH = -0.399 - (-7) (taking the negative logarithm of 2.51)

pH = 6.60

To know more about concentration visit:-

https://brainly.com/question/29072206

#SPJ1

a. The measurements on the target do not represent accuracy well.

b. The measurements on the target represent precision fairly well.

Accuracy refers to the closeness of a measurement to the true or accepted value. Since they are off target, the measurements are not accurate.

Precision refers to the consistency and reproducibility of measurements, and in this case, the shots are clustered around certain areas, with two points in the second circle and two points in the third circle. This indicates that the person taking the shots was able to consistently hit a certain area.

Learn more on accuracy and precision here: https://brainly.com/question/1695072

#SPJ1

The energy can neither be created nor be destroyed. But it can be converted from one form to another. When a person runs, The chemical energy in their food is transformed into mechanical and thermal energy. The correct option is C.

The mechanical energy of an object is the sum of the potential and kinetic energies which is used to do a particular work. It represents the energy of an object due to its motion or position or both.

The body takes chemical energy in the form of food. when a person runs this chemical energy is utilized by our body and converted into kinetic energy (Mechanical). The body get heated by running which then releases thermal energy.

Thus the correct option is C.

To know more about mechanical energy, visit;

https://brainly.com/question/28928306

#SPJ9