help ASAPP plsplsplsplspls tyyyyy

Answer:

As it is an aqueous solution the sodium is dissolved in the water, if you want to extract it use evaporation

Explanation:

Answer:

tempature of the person, check carbon levels in the house or place where the person is.

Explanation:

Answer:

0.008303 mol and 0.0997 g

Explanation:

From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.022×10²³ atoms.

This implies that 1 mole of carbon also contains 6.022×10²³ atoms.

Next, we shall determine the mole of carbon that contains 5.0×10²¹ atoms. This can be obtained as follow:

1 mole of carbon contains 6.022×10²³ atoms.

Therefore, Xmol of carbon will contain 5.0×10²¹ atoms i.e

Xmol of carbon = 5.0×10²¹ / 6.022×10²³

Xmol of carbon = 0.008303 mole

Therefore, 0.008303 mole of carbon contains 5.0×10²¹ atoms.

Finally, we shall determine the mass of carbon. This can be obtained as follow:

Mole of carbon = 0.008303 mole

Molar mass of carbon = 12.01 g/mol

Mass of Carbon =.?

Mole = mass /Molar mass

0.008303 = mass of carbon/12.01

Cross multiply

Mass of Carbon = 0.008303 x 12.01

Mass of Carbon = 0.0997 g.

Answer:

Weight = mass × earth's gravitational acceleration

Explanation:

Follow the following steps to measure the mass and weight of an object:

The single mark placed on the sidewalk by Julie has been acting as the reference point for detecting the motion of the snail. Thus, option D is correct.

The snail has been the shelled animal that has been mostly residing in the resting condition with limited movement. To evaluate the movement of the snail, there has been the consideration of a point that was the starting point from the movement.

The line that has been set across the sidewalk has been acting as the reference, and the distance traveled has been calculated from that point. Thus, option D is correct.

For more information about the reference point, refer to the link:

https://brainly.com/question/1674904

[tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]  is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .

The rate at which the concentration of reactant or product participating in a chemical reaction alters is called the rate of reaction.

Rate of reaction = [tex]\frac{change \;in \;concentration}{time}[/tex] =  (mol/litre)/time.

m= 1 and n = 2

[tex]rate = K [A] [B]^2[/tex]

[tex]0.2 = K X 3 X 3 ^2[/tex]

K =   [tex]\frac{0.2 }{27 }[/tex]

K =   [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]

Hence, [tex]7.408 \;X 10 ^ {-3} m^{-2} s^{-1}[/tex]  is rate of a reaction when k = 0.2, [A] = 3 M, [B] = 3 M, m = 1, n = 2 .

Learn more about the rate of a reaction here:

https://brainly.com/question/8592296

#SPJ2

Answer: 7.4 10-3

Explanation:

7.4 10-3 this is right ong

Answer:

These are Kepler's Laws of Planetary Motion

Explanation:

Answer:

its Keplers third law,

then first law,

then second law

Explanation:

Answer:

441

Explanation:

In particle model A are the red and blue particles MOST LIKELY to bump into each other and the correct option is option A.

The particle model of matter is a theory that explains how the particles that make up a substance are arranged, and how they move and interact with each other.

The particle model explains the properties of solids, liquids and gases. The particle model can explain changes of state.

Particles of matter have spaces between them. Atoms and molecules have spaces between them. In a gas, there are large spaces between them. In a a liquid they are closer together. In a solid, the particles are packed close enough together they can hardly move.

Therefore, In particle model A are the red and blue particles MOST LIKELY to bump into each other and the correct option is option A.

Learn more about Particle Model of matter, here:

https://brainly.com/question/28935060

#SPJ3

Answer:

D a substance that increases the rate of a reaction without being used up itself in a reaction.

Explanation:

Examples are

ammonia synthesis ==> iron

sulfuric acid manufacture ==> nitrogen(II) oxide, platinum

cracking of petroleum==> zeolites

hydrogenation of unsaturated hydrocarbons ==> nickel, platinum, or palladium

I hope it helps

Answer:

Hey there!

The correct answer would be D. "a substance that increases the rate of a reaction without being used up itself in a reaction."

Hope this helps :)

Answer: 7 milimoles of [tex]N_2[/tex] dissolve in 1 litre water.

Explanation:

Given:  [tex]N_2[/tex] gas is passed through water at 293K.

Assumption :[tex]N_2[/tex] exerts a partial pressure of 0.987 bar.

Take : Henry's constant [tex]p_N_2[/tex] = 76.8 Kbar

[tex]K_H=76800[/tex]

To find : Number of moles of  [tex]N_2[/tex] gas dissolve in 1 litre water.

According to Henry's law,

[tex]p_N_2=K_HX_{N_2}[/tex]

[tex]\Rightarrow\ 0.987=76800X_{N_2}[/tex]

[tex]\Rightarrow\ X_{N_2}=\dfrac{0.987}{76800}=0.0000128515625\approx1.29\times10^{-5}[/tex]

moles in 1 liter  of water = [tex]\dfrac{1000}{18}=55.56\ [\text{Molar mass of }H_2O=18\ g][/tex]

Let n= moles of nitrogen

Total moles = 55.56+n

So,

[tex]X_{N_2}=\dfrac{n}{55.56+n}=1.29\times10^{-5}\\\\\Rightarrow\ 55.56\times1.29\times10^{-5}+1.29\times10^5n=n\\\\\Rightarrow\ n- 1.29\times10^5n=0.000714033\\\\\Rightarrow\ 0.999987n=0.000714033\\\\\Rightarrow\ n\approx7\text{ milimoles}[/tex]

Hence, 7 milimoles of [tex]N_2[/tex] dissolve in 1 litre water.

Answer:

Explanation:

Burning  paper is a chemical change.

Burning (or combustion ) is a high temperature chemical reaction that takes place  between fuel and an oxidant(mostly  oxygen)

Research has proved has taught us that ;

When paper is burned , the  oxygen (from the air) combines with carbon and hydrogen in the paper turning some of it into carbon dioxide and water vapor, which waft away with carbon particulates in the smoke

I hope it helps :)

Answer:

b

Explanation:

Answer:

Yes, at 20 °C the tank was filled to full capacity

Explanation:

Given;

let initial pressure, P₁ = 2.37 atm

let initial volume, V₁ = 1860 L

let final pressure, P₂ = 220 bar = 217.123 atm

let final volume, V₂ = ?

Subject the air volume (1860 L )  at 2.37 atm to the tank rating (220 bar)

Ideal law is given by;

PV = nRT

At a fixed mole and gas temperature, the equation becomes;

P₁V₁ = P₂V₂

V₂ = (P₁V₁) / P₂

V₂ = (2.37 x 1860) / 217.123

V₂ = 20.3 L

After subjecting the air volume to tank rating, the volume of the air at 220 bar is 20.3 L which is greater than tank volume (18 L).

The extra 2.3 L can be assumed to be compressed gas volume due to the given (lower) temperature.

Thus, at 20 °C the tank was filled to full capacity.

Answer:

hydro

Explanation: hydrogen

Answer:

C. Atmosphere

Explanation:

First, let’s define each answer choice.

Hydrosphere: all of the water on Earth

Biosphere: the global ecosystem where organisms live

Atmosphere: the envelope of gases around the planet

Lithosphere: the outermost part of the Earth( the crust and upper mantle)

The question asks us to find the scientific name for the layer of gas that surrounds the Earth. The best choice is C. Atmosphere.

Answer:

O c. One that is answered through observation

I used process of elminations so

Explanation:

One that everyone agrees one doesnt mean it's accurate.

Only the one that scientists ask doesnt make sense

One that never changes and One that is answered through observation.... So C

Answer:

The thermal decomposition of ammonium nitrate to produce dinitrogen monoxide and water. This reaction takes place at a temperature of 200-260°C.

Answer:

B. reflection

Explanation:

Rigid transformations are methods involved in changing the dimensions or orientation of a given figure. The methods are; dilation, rotation, translation and reflection.

Reflection is the process in which a given figure is turned or flipped with respect to a point or line of reference.

In the given question,

ΔDEF ≅ ΔD'EF' (Side-Side-Side congruence property)

This implies that ΔDEF was reflected about point E to produce ΔD'EF'. Thus the required rigid transformation is reflection.

Answer:

Is C - Rotation

Explanation:

I have right on my test

At 17 celsius ❤️

it will start to boil ❤️

#indian❤️

Answer: c

Explanation: effusion because there is a movement of a gas through a small opening into a larger volume

Answer:

Explanation:

Molecule of aluminium fluoride is more polar than molecule of aluminium chloride . It is so because fluorine is more electronegative than chlorine . On Pauling scale , the electronegativity of fluorine is 3.98 whereas that of chlorine is 3.16 . Hence in aluminium fluoride , there is stronger inter molecular bonding because of  more polar nature of molecules .  In aluminium chloride  , there is weaker  inter molecular bonding because of  comparatively  polar nature of molecules . Hence melting point of anhydrous aluminium fluoride is higher than that of anhydrous aluminium chloride .

Answer:

TRUE

Explanation:

It is true because along with energy, nuclear fusion releases other particles as well. This can include neutrons or atomic nuclei. An example of this is when hydrogen isotopes (D + T) fuse together to create helium it also releases a neutron. Thus D+T --> He + n + energy.

Therefore the answer is TRUE.

Answer:

d

Explanation:

i got it right

Gas A is likely to have the lowest temperature.  Hence, option A is correct.

The smallest particle of a substance has all of the physical and chemical properties of that substance. Molecules are made up of one or more atoms.

In a gas, the kinetic energy is directly proportional to the temperature under constant pressure and volume.

As you can see in the problem, the average of A has low kinetic energy. But the average is increasing between B, C and D.

As gas A has the lowest average kinetic energy:

Gas A is likely to have the lowest temperature

Hence, option A is correct.

Learn more about molecules here:

https://brainly.com/question/28069497

#SPJ2

Answer:

Explanation:

Ohm's Law. The relationship between voltage, current, and resistance is described by Ohm's law. This equation, i = v/r, tells us that the current, i, flowing through a circuit is directly proportional to the voltage, v, and inversely proportional to the resistance, r.

Answer:

The volume will also decrease.

Explanation:

This illustration clearly indicates Boyle's law.

Boyle's law states that the volume of a fixed mass of gas is directly proportional to the absolute temperature, provided the pressure remains constant. Mathematically, it is represented as:

V & T

V = KT

K = V/T

V1/T1 = V2/T2 =... = Vn/Tn

Where:

T1 and T2 are the initial and final temperature respectively, measured in Kelvin.

V1 and V2 are the initial and final volume of the gas respectively.

From the illustration above, the volume is directly proportional to the temperature. This implies that as the temperature increases, the volume will also increase and as the temperature decreases, the volume also will decrease.

Answer:

Here's what I get  

Explanation:

You haven't shown your drawing, so I will assume that Metal A is the anode and Metal B is the cathode.

I will make a galvanic cell using Mg and Zn as the metals.

I selected Zn because it is common and readily available in the lab.

Zn is lower than Mg in the activity series, so Mg should be able to displace Zn from its salts

The standard reduction potentials are:

                                         E°/V

Zn²⁺ (aq) + 2e⁻ ⇌ Zn(s);  -0.76

Mg²⁺(aq) + 2e⁻ ⇌ Mg(s); -2.38

The Mg half-reaction has the more negative potential, so it will be the oxidation half-reaction.

8 and 9. Oxidation and reduction half-reactions and cell potential

                                                                                   E°/V

Oxidation:  Mg(s) ⇌ Mg²⁺(aq) + 2e⁻ ;                      +2.38

Reduction: Zn²⁺ (aq) + 2e⁻ ⇌ Zn(s);                         -0.76

                   Mg(s) + Zn²⁺ (aq)  ⇌ Mg²⁺(aq) + Zn(s);  +1.62

The cell potential is positive, so the reaction will be spontaneous.

Mg is the anode, so it is Metal A.

Zn is the cathode, so it is Metal B.

1. The Mg|Mg²⁺ half-cell is the oxidation compartment.

2. The Zn²⁺|Zn half-cell is the reduction compartment.

3. The electrons flow from anode to cathode in the external circuit.

4. The Mg²⁺ ions flow from the Mg through the solution to the salt bridge.

5. The Zn²⁺ ions flow from the solution to the Zn.

6. NO₃⁻ ions flow from the salt bridge into the anode compartment to balance the charge of the developing Zn²⁺ ions.

7. Na⁺ ions flow from the salt bridge into the cathode compartment to replace the charge of the depleted Zn²⁺ ions.

Answer:

The Kₐ of the weak acid is 1.033×10⁻⁴

Explanation:

The dissociation of a weak acid in aqueous solution is limited to about 5 to 10%

The acid dissociation reaction is given as follows;

HA (aq) + H₂O (l) → H₃O⁺(aq) + A⁻ (aq)

Given that the pH = 2.5, we have

pH = -log₁₀[H₃O⁺] = 2.5

∴ [H₃O⁺] = 10^(-2.5) = 0.0031623

[tex]K_a = \dfrac{[H_3O^+][A^-]}{[HA]}[/tex]

Kₐ = [H₃O⁺][A⁻]/[HA] = (0.0031623^2)/(0.1 - 0.0031623) = 1.033×10⁻⁴

The acid dissociation constant, Kₐ for weak acid is very low as obtained

Answer:

because the water/air needs to be pumped out.

Explanation:

hoped this helped! (just give it a 1 star if it didn't)

Answer:

[tex]\boxed{C}[/tex]

Explanation:

The electrons farthest away from the nucleus are the valence electrons of an atom.

The valence electrons are the electrons orbiting in the last shell around the nucleus.

Answer:

Option C

Explanation:

The electrons that are the farthest away from the nucleus are valence electrons. These are electrons are present in the outermost shell which is also called valence shell.