Help me!
“When nucleotides are changed in the DNA what happens to the codons in mRNA, and what effects result during protein synthesis?”
Answer:
the ribosome will read the mRNA sequence differently
Explanation:
The change can cause the amino acid to be produced
Light is emitted by atoms that have been excited by
which of the following?
I've been trying to Understand what this problem met, along with I don't know which law I'm using
Can anyone help me out on this?
If 60.0 L of nitrogen is collected over water at 40.0 °C when the atmospheric pressure (total pressure) is 760.0 mm Hg, what is the partial pressure of the nitrogen? (hint: one the gases is water vapor)
(The vapor pressure of water of water at 40°C is 55.3 mmHg, at 50°C is 92.5 mmHg)
According to the question the partial pressure of nitrogen is 704.7 mmHg.
What is pressure?Pressure is a physical quantity that describes the amount of force applied to an object per unit area. It is measured in units of force per unit area, such as pascals (Pa) or pounds per square inch (psi). Pressure is an important factor in many scientific fields such as thermodynamics, fluid dynamics, and mechanics. Pressure is also a measure of how much energy is stored in a given material or system. Pressure is a scalar quantity, meaning that it has a magnitude but no direction. Pressure can be created by a number of sources, such as gravity, the exertion of force, and the application of heat.
The partial pressure of nitrogen is equal to the total pressure of the system minus the vapor pressure of water vapor. In this case, the total pressure is 760.0 mmHg, and the vapor pressure of water at 40°C is 55.3 mmHg. Thus, the partial pressure of nitrogen is:
Partial pressure of nitrogen = 760.0 mmHg - 55.3 mmHg = 704.7 mmHg
To learn more about pressure
https://brainly.com/question/25736513
#SPJ1
6. After intravenous administration of aspartate with N' radioactive marker to experimental animals, the labeled nitrogen is revealed in nucleic acids ofdifferent tissues and organs. What atoms ni purine and pyrimidine bases will include the marker nitrogen? To answer the question, present the schemes of nucleotides synthesis. Indicate the label N ISin these schemes.
In the synthesis of nucleotides, the nitrogenous bases of purines and pyrimidines are synthesized separately and then attached to the sugar-phosphate backbone of the nucleotide.
What is synthesis ?
Synthesis refers to the process of combining simpler components or building blocks to create a more complex substance or system. In other words, it is the creation of something new from individual parts or elements. Synthesis can occur at various levels, from the molecular level to the level of complex systems or structures.
Purines and pyrimidines, which are nitrogenous bases, are produced separately and subsequently joined to the sugar-phosphate backbone of the nucleotide during the synthesis of nucleotides. These nitrogenous bases will synthesise with the marker nitrogen from aspartate already present.
The nitrogen atoms in the ring structure of purines are derived from both glutamine and aspartate. Inosine monophosphate (IMP), a precursor for the production of AMP and GMP, is formed as the first step in the synthesis of purine nucleotides. A simplified diagram of the production of purine nucleotides is shown below, with the nitrogen atoms from aspartate and glutamine indicated:
Aspartate + PRPP -> IMP (label N from aspartate)Glutamine + ATP -> PRPP (label N from glutamine)IMP + Aspartate + GTP -> AMP (label N from aspartate)IMP + Glutamine + ATP -> GMP (label N from glutamine)In the case of pyrimidines, the nitrogen atoms in the ring structure come from aspartate and glutamine. The synthesis of pyrimidine nucleotides starts with the formation of uridine monophosphate (UMP), which serves as a precursor for the synthesis of the other pyrimidine nucleotides. The following is a simplified scheme of the synthesis of pyrimidine nucleotides, indicating the nitrogen atoms that come from aspartate and glutamine:
Aspartate + Carbamoyl phosphate -> Carbamoyl aspartate (label N from aspartate)Carbamoyl aspartate + ATP -> Uridine monophosphate (UMP) (label N from aspartate)Glutamine + ATP -> Carbamoyl phosphate (label N from glutamine)UMP + Aspartate + GTP -> CTP (label N from aspartate)Therefore, the nitrogen atoms in the purine and pyrimidine bases that include the marker nitrogen from aspartate will be as follows:
In purines: the nitrogen atoms in the 6- and 7-membered rings (i.e., atoms N3, N7, and N9) will include the marker nitrogen from aspartate.In pyrimidines: the nitrogen atoms in the 6-membered ring (i.e., atoms N1 and N3) will include the marker nitrogen from aspartate.Learn more about synthesis of nucleotides click here:
https://brainly.com/question/30565257
#SPJ1
A 45.58 g sample of a substance is initially at 28.1 °C. After absorbing 1585 J of heat, the temperature of the substance is 124.2 °C. What is the specific heat ( ) of the substance?
c= Jg⋅∘C
Explanation:
We can use the formula for calculating the heat absorbed by a substance to find its specific heat:
q = mcΔT
where q is the heat absorbed, m is the mass of the substance, c is its specific heat, and ΔT is the change in temperature.
We can first calculate the change in temperature:
ΔT = 124.2 °C - 28.1 °C = 96.1 °C
Next, we can substitute the given values into the formula and solve for c:
1585 J = (45.58 g) c (96.1 °C)
c = 1585 J / (45.58 g × 96.1 °C)
c = 0.357 J/g⋅∘C
Therefore, the specific heat of the substance is 0.357 J/g⋅∘C.
Indicate the type and number of orbitals in each of the following energy levels or sublevels.
a. n = 1
b. 3p sublevel
Quantum numbers are a set of four numbers used to describe the quantum state of an electron in an atom. These numbers specify the energy, orbital shape, orientation, and spin of the electron.
What is Energy Sublevels?
Energy sublevels, also known as subshells, are regions within an energy level where electrons are likely to be found. Each energy sublevel is characterized by a unique shape and orientation in space, and can contain a specific number of electrons.
The energy sublevels within an energy level are arranged in order of increasing energy, with the s sublevel being the lowest in energy and the f sublevel being the highest in energy. The number and arrangement of electrons in an atom's energy sublevels determine its electronic configuration and its chemical and physical properties.
a. When n = 1, there is only one energy level and it contains one s orbital.
b. The 3p sublevel corresponds to the third energy level (n=3) and consists of three p orbitals. The p orbitals are oriented along the x, y, and z axes and can hold a total of 6 electrons (2 electrons per orbital). Therefore, the 3p sublevel contains three p orbitals.
Learn more about Energy Sublevels from given link
https://brainly.com/question/29344931
#SPJ1
The antibiotic gramicidin A can transport Na+ ions into a certain cell at the rate of 5.0 × 107 Na+ ions/channel · s. Calculate the time in seconds to transport enough Na+ ions to increase its concentration by 7.10 × 10−3 M in a cell whose intracellular volume is 1.60 × 10−10 mL.
The amount of ions is caculated by, the formula of follows [tex]$$c=M \times V$$[/tex][tex]$C$[/tex] is the amount [tex]$M$[/tex] is the molarity and[tex]$V$[/tex] is the volume.
What is called chemical reaction?In the chemical reaction, the reaction bate is the change in concentration of reactant per unit time. The time for a reaction is calculated by the formula of fallers.
Convey the volume from [tex]$m L$ to $L$[/tex] by the conversion factor as follows
[tex]\begin{aligned}1 \mathrm{~mL} & =10^{-3} \mathrm{~L} \\1.80 \times 10^{-10} \mathrm{~mL} & =1.80 \times 10^{-10} \mathrm{mc} \times \frac{10^{-3}}{1 \mathrm{~mL}} \\& =1.80 \times 10^{-13} \mathrm{~mL}\end{aligned}[/tex]
Calculate the time by the eq [tex]$83.464 \times 10^7$[/tex]Io runt, of
[tex]$$\begin{aligned}t & =\frac{83.464 \times 10^7 \mathrm{Na}^{-1} \text { ions }}{5.0 \times 10^7 \mathrm{Na}^{-1} \text { io ry / chanel } \mathrm{s}} \\& =16.69 \text { chanel }-\mathrm{s}\end{aligned}$$[/tex]
The time required is 16.69chanel-s
Learn more about molarity
https://brainly.com/question/8732513
#SPJ4
A--B--> 3-ethyl-4- methylhexanal + C --D --> E + F
A =
B =
C =
D =
E =
F =
The structure of the compound is shown in the image attached
How do you deduce the structure of an organic compound?The molecular formula gives information about the types and number of atoms in the compound. This can be used to determine the possible functional groups and the degree of unsaturation (the number of rings or double bonds) in the compound.
When we look at the name of the compound, we can be able to tell the bonds and the substituents that we have in the compound and that would help us to deduce its structure.
Learn more about organic compound:https://brainly.com/question/5994723
#SPJ1
Question 3Describe the energy in nuclear fuel and the way in witch it’s converted to electrical energy
The energy in nuclear fuel comes from the fission (splitting) or fusion (merging) of atomic nuclei. When the nucleus of an atom is split or merged, a large amount of energy is released in the form of heat and radiation. This energy is known as nuclear energy, and it is one of the most concentrated forms of energy known to us.
To convert nuclear energy into electrical energy, we typically use a nuclear reactor, which is a device that uses controlled nuclear reactions to generate heat. The heat is then used to produce steam, which drives a turbine connected to a generator. The generator converts the mechanical energy of the turbine into electrical energy, which can be distributed to homes and businesses through a power grid.
In more detail, the nuclear reactor contains fuel rods that are made of a radioactive material, such as uranium-235 or plutonium-239. When a neutron strikes the nucleus of one of these atoms, it causes the nucleus to split into two smaller nuclei, along with the release of additional neutrons and a large amount of heat. This process is known as nuclear fission, and it is sustained in the reactor by controlling the rate of neutron production and absorption.
The heat produced by nuclear fission is transferred to a coolant, such as water or gas, which carries the heat to a heat exchanger. In the heat ex
Please help fast
Thankssssssss
The total number of moles of ammonia produced when 10 moles of hydrogen reacts with a mole of nitrogen would be = 6.7 moles of ammonia.
How to calculate the calculate the total number of moles of ammonia?From the balanced chemical equation given above, 1 mole of nitrogen reacts with 3 moles of hydrogen to produce 2 moles of ammonia.
This means that;
3 moles of Hydrogen = 2 moles of ammonia
10 moles of hydrogen = X moles of ammonia
Make X the subject of formula;
X = 10×2/3
= 20/3
= 6.7 moles of ammonia.
Therefore when 10 mole of hydrogen reacts with nitrogen, 6.7 mole of ammonia will be produced.
Learn more about chemical equations here:
https://brainly.com/question/26694427
#SPJ1
A person has $4000to invest. Part of the money is to be placed in a certificate of deposit paying %, per year. The rest is to be placed in corporate bonds paying %, per year. If he wishes to obtain an overall return of % per year, how much should be placed in each investment?
Answer:
Let x = amount invested in certificate of deposit (in dollars)
Let y = amount invested in corporate bonds (in dollars)
Total amount invested = $100: x + y = 100
CD pays 2% per year, corporate bonds pay 4% per year, total return is 3% per year
Total return on investments = 3% of $100 = $3: 0.02x + 0.04y = 3
Simplifying the equations:
x + y = 100
2x + 4y = 300
Solving for x:
x + y = 100
x = 50
Therefore, the person should invest $50 in the certificate of deposit and $50 in corporate bonds to obtain an overall return of 3% per year.
Explanation:
An air/gasoline vapor mix in an automobile cylinder has an initial temperature of 173 ∘C and a volume of 12.4 cm3 . If the mixture is heated to 567 ∘C with the pressure and amount held constant, what will be the final volume of the gas in cubic centimeters?
Answer:
Explanation:
We can solve this problem using the combined gas law:
(P1V1) / T1 = (P2V2) / T2
where P is the pressure, V is the volume, and T is the temperature, measured in kelvins (K). The amount of gas is assumed to be constant.
We need to convert the initial and final temperatures to kelvins by adding 273.15 to each temperature:
T1 = 173 + 273.15 = 446.15 K
T2 = 567 + 273.15 = 840.15 K
Substituting the given values into the equation and solving for V2, we get:
(1V1) / T1 = (1V2) / T2
V2 = (T2/T1) * V1
V2 = (840.15/446.15) * 12.4 cm3
V2 = 23.3 cm3 (rounded to one decimal place)
Therefore, the final volume of the gas will be 23.3 cubic centimeters.
Calculate the number of moles and the mass of the solute in each of the following solutions:
(a) 2.00 L of 18.5 M H2SO4, concentrated sulfuric acid
(b) 100.0 mL of 3.8 X 10^-6 M NaCN, the minimum letal concentration of sodium cyanide in blood serum.
a) 2.00 L of 18.5 M H2SO4, concentrated sulfuric acid
What is sulfuric acid?
Sulfuric acid is a strong mineral acid commonly used in industrial settings for a variety of purposes. It is a colorless, odorless, oily liquid that is highly corrosive and reacts violently with many organic and inorganic materials.
Number of moles = Molarity x Volume
= 18.5 M x 2.00 L
= 37.0 moles
Mass of the solute = Number of moles x Molar Mass
= 37.0 moles x 98 g/mol
= 3,646 g
b) 100.0 mL of 3.8 X 10^-6 M NaCN, the minimum letal concentration of sodium cyanide in blood serum.
Number of moles = Molarity x Volume
= 3.8 x 10^-6 M x 0.100 L
= 3.8 x 10^-8 moles
Mass of the solute = Number of moles x Molar Mass
= 3.8 x 10^-8 moles x 49 g/mol
= 1.86 x 10^-7 g
To learn more about sulfuric acid
https://brainly.com/question/10220770
#SPJ1
if 54.9g of aluminum hydroxide, al(oh)3, is neutralized with 91.9g of sulfuric acid, h2so4. how many grams of al₂(so₄)₃ will be produced
Answer:
120.2 g of aluminum sulfate will be produced
Explanation:
The balanced chemical equation for the reaction between aluminum hydroxide and sulfuric acid is:
2Al(OH)3 + 3H2SO4 → Al2(SO4)3 + 6H2O
According to the equation, it takes 2 moles of aluminum hydroxide to react with 3 moles of sulfuric acid to produce 1 mole of aluminum sulfate.
To find out how many grams of aluminum sulfate will be produced, we first need to calculate the number of moles of each reactant.
The molar mass of aluminum hydroxide (Al(OH)3) is:
Al = 26.98 g/mol
O = 15.99 g/mol (3 atoms)
H = 1.01 g/mol (9 atoms)
Total = 78.00 g/mol
Therefore, 54.9 g of aluminum hydroxide is equal to 54.9 g / 78.00 g/mol = 0.7038 moles of aluminum hydroxide.
The molar mass of sulfuric acid (H2SO4) is:
H = 1.01 g/mol (2 atoms)
S = 32.07 g/mol
O = 15.99 g/mol (4 atoms)
Total = 98.08 g/mol
Therefore, 91.9 g of sulfuric acid is equal to 91.9 g / 98.08 g/mol = 0.9361 moles of sulfuric acid.
Since 2 moles of aluminum hydroxide react with 3 moles of sulfuric acid to produce 1 mole of aluminum sulfate, the limiting reactant in this case is aluminum hydroxide, as it is present in the smaller amount.
The number of moles of aluminum sulfate produced can be calculated as:
0.7038 moles Al(OH)3 × (1 mole Al2(SO4)3 / 2 moles Al(OH)3) = 0.3519 moles Al2(SO4)3
The molar mass of aluminum sulfate (Al2(SO4)3) is:
Al = 26.98 g/mol (2 atoms)
S = 32.07 g/mol (3 atoms)
O = 15.99 g/mol (12 atoms)
Total = 342.15 g/mol
Therefore, the mass of aluminum sulfate produced is:
0.3519 moles Al2(SO4)3 × 342.15 g/mol = 120.2 g
Therefore, 120.2 g of aluminum sulfate will be produced.
Give a description of each of the five chemical reactions from the point of view of different classifications and arrange the coefficients
1. The reaction between the reactants potassium iodide and lead nitrate, which results in potassium nitrate and lead iodide. It is hence a double decomposition reaction.
Types2. The reaction between magnesium (Mg) and titanium tetrachloride (TiCl4) produces titanium (Ti) and magnesium chloride (MgCl2). It is a displacement reaction because titanium in titanium chloride is displaced by the more active magnesium.
3. The reaction between CO2 and H2O is an illustration of an addition reaction, or more specifically, a nucleophilic addition reaction. Thus, the hydrogen ion from the water molecule serves as the nucleophile.
4. The production of salt, which is copper chloride and water, as a result of the reaction between copper oxide and hydrochloric acid is an example of neutralization.
HCl and Copper Oxide together produce a Neutralization reaction.
5. A decomposition reaction takes place when a single reactant splits into two or more products. The all-inclusive formula AB A + B can be used to represent this. Hydrogen peroxide and water being broken down into hydrogen and oxygen are two examples of decomposition reactions.
For more information on chemical reactions kindly visit to
https://brainly.com/question/21208185
#SPJ1
HELP! ILL MARK YOU AS BRAINLIST.
Ascorbic acid (vitamin C) contains 40.92 % % carbon, 4.58% % hydrogen, and 54.50% % oxygen by mass. Assume a 100-gg sample of ascorbic acid. How many moles of carbon, hydrogen, and oxygen are present in a 100-gg sample of ascorbic acid? Enter the number of moles of carbon, hydrogen, and
oxygen numerically, separated by commas.
Answer:
In 100 g of ascorbic acid, we will have 40.92 g C, 4.58 g H, and 54.50 g O. The whole-number ratio gives us the subscripts for the empirical formula. Thus, the empirical formula is C3H4O3.
Explanation:
Answer: Hope this helps
Explanation:
ANSWER ALL THE FOLLOWING
A. Cr2O3 (Chromium (III) Oxide); Stock Name: Chromic Oxide b. (NH4)3PO4 (Ammonium Phosphate); Stock Name: Ammonium Phosphate c. CaSO4 (Calcium Sulfate); Stock Name: Gypsum.
What is Gypsum ?
Gypsum is a soft, white, mineral composed of calcium sulfate dehydrate. It is typically found in the form of sedimentary rock and is an important component of soil. Gypsum can be used in a variety of industrial and commercial applications. It is often used in the production of plaster and drywall, as well as in cement and concrete.
II. a. Iron(II) Chloride
b. Barium Hydroxide
c. Lithium Cyanide
d. Lead(II) Chloride
The correct pairing is d. P4Q10: tetraphosphorus decoxide. Phosphorus can form up to four single bonds with oxygen, so the correct compound name would be tetraphosphorus decoxide.
IV.a. C2H2
b. C2H4
To learn more about Gypsum
https://brainly.com/question/14456033
#SPJ1
Explain why not all sugar is bad for you give some examples of good sugars in your explanation
Answer:
Not all sugars are bad for you because there are different types of sugars that have different effects on the body.
For example, natural sugars found in fruits, vegetables, and dairy products are considered good sugars because they are accompanied by fiber, vitamins, and minerals that are beneficial for the body. These sugars are also absorbed more slowly by the body, which helps to regulate blood sugar levels and prevent spikes in insulin.
Another example of a good sugar is honey, which contains antioxidants and has antibacterial properties. It is also a natural sweetener that can be used in moderation to add flavor to foods and drinks.
On the other hand, added sugars found in processed foods and drinks are considered bad sugars because they are often high in calories and low in nutrients. These sugars can contribute to weight gain, inflammation, and other health problems when consumed in excess.
Examples of added sugars to avoid include high fructose corn syrup, table sugar, and syrups used in processed foods and drinks. It is important to read food labels and limit intake of added sugars to maintain a healthy diet.
Mg(s)+2HCl(aq)=MgCl2(aq)+H2(g)
How many g of Magnesium metal are required to obtain 2.6L of hydrogen gas?
The answer is 21.5 L ,So, start with the balanced chemical equation for the decomposition of hydrochloric acid.
What is hydrochloric used for?An liquid solution of hydrogen chloride is what is known as hydrochloric acid, also referred to as muriatic acid. It has an unmistakably strong odour and is translucent. It is categorised as a powerful acid. In the digestive processes of the majority of mammal species, including humans, it is a part of the gastric acid. A crucial commercial substance and reagent for laboratories is hydrochloric acid.
Chemical burns from hydrochloric acid can be extremely painful if they come into touch with skin or other organs. Ingestion of hydrochloric acid can result in blindness. The concentration of the acid and how long it remains in touch with the organs determine how severe the burns are.
Learn more about hydrochloric
https://brainly.com/question/14006357
#SPJ1
Hydrogen peroxide breaks down, releasing oxygen, in the following reaction:
2H.02(ag) - 2H,0(1) + 02(g)
a. What mass of oxygen is produced when 1.840 mol of H,O, decomposes?
b. What mass of water is produced when 5.0 mol O, is produced by this reaction?
The mass of oxygen produced when 1.840 mol of H2O2 decomposes is 29.44g and the mass of water produced when 5.0 mol O, is produced by this reaction is 180.02g.
Given that the Hydrogen peroxide breaks down, releasing oxygen as:
[tex]2H2O2(g) -- > 2H2O(1) + O2(g)[/tex]
a.) The mass of oxygen is produced = m
Given the number of moles of H2O2 = 1.840
We know The molecular weight of H2O2 is = 34.01 g/mol
the molecular weight of O2 is = 32.00 g/mol.
We know that number of moles is equal to mass of substance divided by its molar mass such that:
number of moles of O2 = 1.840 mol H2O2 x (1 mol O2 / 2 mol H2O2)
The mass of O2 = 0.920 mol O2 * 32 g/mol O2 = 29.44g
b.) Given the number of moles of O = 5.0
Then number of moles of H2O produced = 5.0 mol O2 x (2 mol H2O / 1 mol O2) = 10 mol H2O
mass of H2O produced = 10 mol H2O * (18.02 g H2O / 1 mol H2O) = 180.02 g H2O
To learn more about moles click here https://brainly.com/question/26416088
#SPJ1
2 LiOH + CO2 > Li2CO3 + H2O
How many milliliters H20(density = .997 g/mL could form from 29.3g LiOH
Answer:
We can use stoichiometry to determine the amount of water produced when 29.3 g of LiOH reacts with CO2.
First, we need to convert 29.3 g of LiOH to moles:
moles of LiOH = mass/molar mass = 29.3 g / (6.941 g/mol + 15.999 g/mol + 1.008 g/mol) = 0.5 mol
From the balanced chemical equation, we see that 2 moles of LiOH react with 1 mole of CO2 to produce 1 mole of H2O. Therefore, we can say:
0.5 mol LiOH × (1 mol H2O / 2 mol LiOH) = 0.25 mol H2O
Now, we can use the molar mass of water to convert moles to grams:
mass of H2O = moles × molar mass = 0.25 mol × 18.015 g/mol = 4.504 g
Finally, we can use the density of water to convert grams to milliliters:
volume of H2O = mass / density = 4.504 g / 0.997 g/mL = 4.52 mL
Therefore, approximately 4.52 mL of water could form from 29.3 g of LiOH.
according to the theory of plate tectonics which is one feature that plates carry
According to the theory of plate tectonics, plates carry both the oceanic and continental crusts of the Earth's lithosphere.
The lithosphere is the rigid outermost layer of the Earth, which is broken into several large plates that move relative to one another over time.
What is plate tectonics theory?
The plate tectonics theory is a scientific model that explains the movement and behavior of the Earth's lithosphere, which is the rigid outermost layer of the planet. According to this theory, the lithosphere is divided into several large plates that move and interact with one another over time.
The driving force behind plate movement is the convection currents in the mantle layer beneath the lithosphere. As these currents move, they drag the plates along with them, causing them to collide, slide past one another, or move apart. These interactions can cause geological events such as earthquakes, volcanic eruptions, and the formation of new landmasses.
The plate tectonics theory has provided a framework for understanding many of the geological features of the Earth's surface, including the distribution of mountain ranges, the formation of ocean basins, and the occurrence of earthquakes and volcanic activity. The theory has also helped explain the distribution of plant and animal species, as well as the historical movements of the continents over geological time.
To know more about layers of earth visit :-https://brainly.com/question/10430823
#SPJ1
Answer: a. seafloor
Explanation:
The diagram below shows a gas with an initial pressure of 3060 mm Hg in a cylinder constant temperature. The gas expands inside the cylinder and pushes the piston
the final pressure of the gas inside the cylinder is 784 mm Hg.
What is Boyle's law?
To solve this problem, we can use Boyle's Law, which states that the pressure of a gas is inversely proportional to its volume at constant temperature. Mathematically, this can be written as:
P1V1 = P2V2
where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
Substituting the given values into the equation, we get:
3060 mm Hg x 0.520 L = P2 x 2.03 L
P2 = (3060 mm Hg x 0.520 L) / 2.03 L
P2 = 784 mm Hg
Therefore, the final pressure of the gas inside the cylinder is 784 mm Hg.
The answer is (B) 784 mm Hg.
To know more about Boyle's law visit :-
https://brainly.com/question/1696010
#SPJ9
How many grams of NaOH reacted
3.49 grams of NaOH reacted in this precipitation reaction.
How to find the amount of NaOHFrom the balanced chemical equation
1 mole of Fe(NO3)3 reacts with 3 moles of NaOH to produce 1 mole of Fe(OH)3 and 3 moles of NaNO3.
We can start by calculating the number of moles of Fe(OH)3 produced:
molar mass of Fe(OH)3
= 55.85 g/mol + 3(16.00 g/mol + 1.01 g/mol)
= 106.88 g/mol
moles of Fe(OH)3 = 28.0 g / 106.88 g/mol = 0.262 moles
According to the stoichiometry of the balanced equation,
1 mole of Fe(OH)3 is produced by reacting with 3 moles of NaOH. Therefore, the number of moles of NaOH used in the reaction is:
moles of NaOH = 0.262 moles / 3 = 0.0873 moles
Convert the number of moles to grams:
molar mass of NaOH
= 22.99 g/mol + 16.00 g/mol + 1.01 g/mol
= 40.00 g/mol
grams of NaOH
= moles of NaOH x molar mass of NaOH
= 0.0873 moles x 40.00 g/mol
= 3.49 g
Learn more about precipitation reaction at:
https://brainly.com/question/20469884
#SPJ1
What is the role of grasses in the food web above
The food web in the image you provided includes a variety of organisms such as producers, consumers, and decomposers. Grasses play an important role in this food web as they are a primary producer.
What is the process by which grasses and other plants convert sunlight into energy in the food chain?
Grasses, like other plants, use photosynthesis to convert sunlight into energy, which they use to grow and produce organic compounds such as sugars and starches. These compounds form the basis of the food chain, providing energy and nutrients for herbivores such as insects, rodents, and large mammals like deer and bison.
In turn, these herbivores are consumed by predators such as snakes, hawks, and wolves, which are then decomposed by scavengers and decomposers such as bacteria and fungi. These decomposers break down the remains of dead organisms and return nutrients to the soil, where they can be taken up by plants like grasses to start the cycle anew.
Therefore, grasses are a critical component of the food web, serving as the foundation for energy flow and supporting the survival of many different species in the ecosystem.
To learn more about food web follow the given link: https://brainly.com/question/15544799
#SPJ1
2.72 Name the following ionic compounds: (a) KCN, (b) NaBrO2, (c) Sr(OH)2, (d) CoTe, (e) Fe2(CO3)3, (f) Cr(NO3)3, (g) (NH4)2SO3, (h) NaH2PO4, (i) KMnO4, (j) Ag2Cr2O7.
KCN is potassium cyanide, and NaBrO2 is sodium bromide, strontium hydroxide (SrOH), iron carbonate (Fe2CO3)3, and chromium nitrate (CrNO3)3.
Why is the compound NH4 2SO4 an ionic one?Ammonium NH4+ and sulfate SO42- are the two polyatomic ions that make up the ionic compound Ammonium Sulfate. To balance the sulfate ions, Ammonium Sulfate (NH4)2SO4 is produced by removing one electron from ammonium. Two NH4+ particles and one SO4 2-particle is found in every atom of ammonium sulfate.
What is the ionic compound of NaH2PO4 that follows?Monosodium phosphate, monosodium dihydrogen orthophosphate, and monosodium phosphate are the three types of sodium phosphate. Formula Linear: NaH2PO4.
To know more about KCN visit :-
https://brainly.com/question/9674829
#SPJ1
Calculate the number of moles in 80.0 g of phosphorus
There are 2.586 moles of phosphorus in 80.0 g of phosphorus.
This number is known as Avogadro's number, which is approximately 6.022 x 10^23.
What is Moles?
Moles are a unit of measurement used in chemistry to express the amount of a substance. One mole of a substance is the volume of that substance that has the same number of atoms as there are in 12 grammes of pure carbon-12. Other terms for moles include molecules and ions.This number is known as Avogadro's number, which is approximately 6.022 x 10^23.
To calculate the number of moles in 80.0 g of phosphorus, we need to divide the mass of phosphorus by its molar mass. The molar mass of phosphorus is 30.97 g/mol.
Number of moles of phosphorus = 80.0 g / 30.97 g/mol
Number of moles of phosphorus = 2.586 moles
Therefore, there are 2.586 moles of phosphorus in 80.0 g of phosphorus.
Learn more about Moles from given link
brainly.com/question/29367909
#SPJ1
10
Select the correct answer.
Which property of a substance can be determined using a pH indicator?
OA. acidity
OB. boiling point
O C. density
OD. electrical conductivity
OE
Which property of a substance can be determined using a pH indicator
Answer: (A) acidity
Explanation: Acidity is a measure of how acidic a substance is. pH is a system used to measure the H+ ion concentration in a substance. Using the equation -log([H+]=pH, if given a pH value less than 7, a substance is acidic, and greater than 7 indicates basicity.
Common indicators are phenolphthalein and bromthymol blue which turn different colors depending on the acidity of the solution they're in. This color tells us nothing about the boiling point, density, or electrical conductivity.
Hope this helps!
Why do carbon, silicon, and germanium share many chemical properties?
o They have the same atomic mass.
o They have the same atomic number.
o They have the same ratio of electrons to protons.
o They have the same electron configuration.
Answer:
Carbon, silicon, and germanium share many chemical properties because they belong to the same group in the periodic table, which is group 14 (also known as the carbon group). The elements in this group have the same number of valence electrons (4), which gives them similar chemical properties.
The correct option is: They have the same number of valence electrons (4), which gives them similar chemical properties.
Explanation:
The periodic table shown below can be used to help determine how the properties of different compounds compare.
How do the physical and chemical properties of calcium iodide (CaI2) compare to carbon disulfide (CS2) and sodium fluoride (NaF)?
The table below lists the chemical and physical features of sodium fluoride (NaF), sulfite (CS2), and calcium iodide (CaI2):
What does the term periodic table mean?Scientists can easily identify the properties of specific features, like its mass, electron number, and electron, thanks to the periodic table's organization.
At normal temperature, CaI2 is a solid, CS2 is a liquids, and NaF is a stable.
Melting Point: CaI2, CS2, and NaF all have high melting temperatures of 819°C, -110.8°C, and 993°C, respectively.
Boiling Point: The specific heats of CaI2, CS2, and NaF are 1,309°C, 46.3°C, and 1,705°C, respectively.
Water Reactivity: CaI2 combines with water to produce calcium hydroxide and hydroiodic acid. As CS2 cannot disintegrate in water, it does not mix with it. NaF interacts with water to generate alkaline solution and hydrofluoric acid.
CaI2 is a salt that decomposes in water to produce calcium metal ions and iodide anions, giving it acid-base properties. In water, the acid CS2 and the basic salt NaF separate to produce sodium metal ions and fluoride anions.
To know more about periodic table visit:
https://brainly.com/question/11155928
#SPJ1