The model suggests that increased SST does relate to more storms. It is likely that the influence of SST on the number of storms is statistically significant, as it has been found in studies that a positive correlation exists between SST and the number of storms in an area.
Higher SST can lead to more frequent and intense storms due to the increased evaporation and the resulting moisture in the atmosphere. This moisture can then be used to fuel more storms.
Additionally, higher SST leads to warmer ocean waters, which provide more energy for storms to form and grow. Overall, this suggests that SST can have a significant influence on the number of storms in an area.
Know more about SST here :-
https://brainly.com/question/22985165#
#SPJ11
The __________ of a river gets the majority of flooding.
The floodplain of a river gets the majority of flooding.
What is a floodplain?A floodplain is a low-lying area alongside a river that floods when the water level rises. A river's floodplain is formed when the river's water flow erodes the land and deposits sediments. During dry periods, these sediments become a fertile place for vegetation to grow. In comparison to adjacent upland areas, floodplains have higher soil moisture, nutrients, and organic matter levels.The area that is flooded when a river overflows its banks is known as a floodplain. Because of their frequent flooding, floodplains serve as natural reservoirs for water and nutrients, as well as providing a variety of environmental services. They also provide habitats for diverse organisms, including plants and animals adapted to live in wet environments.
Learn more about floodplain here: https://brainly.com/question/11935939
#SPJ11
Light travels extremely fast through the universe. However, the speed of light is limited to about
300,000 km/s. Because of that, it takes sunlight 8.3 minutes to reach the Earth.
How long does it take light from the Sun’s surface to reach Mars (223 million km distance to the
Sun), Jupiter (777 million km) and Pluto (5,906 million km), respectively?
It takes about 12.5 minutes for light from the Sun's surface to reach Mars, approximately 43 minutes to reach Jupiter, and about 5.5 hours to reach Pluto, due to the varying distances between these planets.
About 300,000 km/s, or around 186,000 miles per second, is the speed of light. In less than 3 seconds, light can cover a distance of one million kilometres.Mars and the Sun are separated by 223 million kilometres. From the surface of the Sun to Mars, light travels at the speed of light in around 12.5 minutes.Since Jupiter is further from the Sun, light takes longer to reach it. As there are 777 million kilometres between the Sun and Jupiter, it takes light 43 minutes to reach Jupiter from the Sun's surface.Pluto is located in our solar system's outermost planets, 5,906 million kilometres from the Sun. Hence, itAs a result, light takes around 5.5 hours to travel from Pluto to the surface of the Sun.The universe's maximum speed limit is the speed of light. It is a fundamental law of nature and an important part of how we comprehend the cosmos.Optics is the study of how light moves through space and interacts with things.
learn more about Mars here:
https://brainly.com/question/644043
#SPJ1
if we allow for moisture loss due to a moist greenhouse effect, the inner boundary of the sun's habitable zone would be
If we allow for moisture loss due to a moist greenhouse effect, the inner boundary of the sun's habitable zone would be further out than it is at present.
What is the habitable zone?A habitable zone refers to a range of distances from a star within which it is possible for a planet with sufficient atmospheric pressure to maintain liquid water on its surface. The concept of a habitable zone applies not only to planets in our solar system, but also to planets orbiting other stars, especially those that might be capable of supporting life.
The moist greenhouse effect is a theoretical term used to describe the effect that water vapor would have on the temperature of a planet's surface in the presence of an abundant amount of water.
If there is too much water vapor in the atmosphere of a planet, it may cause a "moist greenhouse effect," where the planet is too hot for liquid water to exist on its surface, even though it is within the habitable zone.
According to the scientists, the inner boundary of the sun's habitable zone would be further out than it is at present if we allow for moisture loss due to a moist greenhouse effect, because the greenhouse effect caused by the water vapor would cause the planet's surface to be much warmer than it would be without the presence of the water vapor.
To know more about habitable zone refer here :
https://brainly.com/question/29908245#
#SPJ11
which of the followng us states is best represented by a cold continental climate type without a dry season and warm summer?
The best state to represent a cold continental climate type without a dry season and warm summer is Minnesota. Located in the northern United States, Minnesota experiences cold winters and warm summers due to its location near the Great Lakes and distant from the moderating influence of the Atlantic Ocean.
Summers are warm and humid with temperatures from around 70-85 degrees Fahrenheit (20-30 Celsius). Winters are cold and snowy with temperatures ranging from 0-25 degrees Fahrenheit (-18 to -4 Celsius). The state has four distinct seasons and is known for its extreme seasonal climate changes.
In the winter, snowfall can range from a few inches to several feet in just a few days. The state's cold continental climate type without a dry season and warm summer is best represented in the northern part of the state, with average temperatures ranging from 20-30 degrees Fahrenheit (-7 to -1 Celsius). This type of climate is best suited for cold-weather crops such as wheat, barley, peas, and potatoes.
Know more about Minnesota here
https://brainly.com/question/14521803#
#SPJ11
__________ load refers to sand pebbles and boulders that are too heavy to be carried along in suspension.
Bed load refers to sand pebbles and boulders that are too heavy to be carried along in suspension.
Bedload is the name given to the rocks, pebbles, and boulders that are too heavy to be carried along in suspension. They roll or slide along the river's bed or floor due to gravity, and their movements are caused by currents or turbulence.
Bedload can cause erosion by cutting into the bed or floor of the river or stream, and it can also cause sedimentation by depositing itself downstream. Bedload is classified into three categories: the largest, which are boulders, then cobblestones, and finally, the smallest, which are pebbles.
Learn more about bedload at https://brainly.com/question/30896499
#SPJ11
which are the most common renewable energy resources used in the nordic nations? select all that apply. geothermal solar biomass hydroelectric
The most common renewable energy resources used in the Nordic nations are geothermal, solar, biomass, and hydroelectric.
Geothermal energy is the heat generated and stored beneath the Earth’s surface. It can be tapped and used for a range of applications including generating electricity. This resource is widely used in Nordic countries such as Iceland, Finland, and Norway.
Solar energy is a renewable resource that can be used to generate electricity through photovoltaic (PV) cells. Solar power is widely used in all Nordic countries as it can provide clean energy and reduce greenhouse gas emissions.
Biomass is a renewable energy resource that uses organic materials such as wood, animal waste, and plant material to generate electricity. In the Nordic countries, biomass is mainly used in the form of wood pellets and wood chips.
Hydroelectric power is generated when the energy of flowing water is converted into electricity. This renewable energy resource is commonly used in countries such as Sweden and Finland.
Overall, the Nordic nations have some of the highest rates of renewable energy usage in the world, with geothermal, solar, biomass, and hydroelectric being the most commonly used resources.
Know more about renewable energy here:
https://brainly.com/question/17373437
#SPJ11
if a sandstone contains pieces of basalt, then the sandstone is younger than the basalt, according to the principle of
According to the Principle of Superposition, sedimentary rocks like sandstone are typically younger than the igneous rocks, like basalt, from which they were formed. This is because sedimentary rocks form from the accumulation of sediments like sand, and these sediments can only accumulate on top of older rocks, thus making the sedimentary rocks younger.
In the case of sandstone containing pieces of basalt, this implies that the sandstone is younger than the basalt, as the basalt must have existed before the sedimentary layers of sandstone formed around it.
According to the Principle of Superposition, sedimentary rocks like sandstone are typically younger than the igneous rocks, like basalt, from which they were formed. This is because sedimentary rocks form from the accumulation of sediments like sand, and these sediments can only accumulate on top of older rocks, thus making the sedimentary rocks younger.
In the case of sandstone containing pieces of basalt, this implies that the sandstone is younger than the basalt, as the basalt must have existed before the sedimentary layers of sandstone formed around it.
To learn more about sedimentary rocks here:
https://brainly.com/question/30765754#
#SPJ11
matching question match each of these major north american earthquakes with its cause/description. alaska, 1964 alaska, 1964 drop zone empty. san francisco, 1906 san francisco, 1906 drop zone empty. new madrid, 1811-1812 new madrid, 1811-1812 drop zone empty. mexico city, 1985
The matching of each of these major north american earthquakes with its cause/description are:
Alaska, 1964: 9.2 magnitude earthquake caused by a strike-slip fault of the Pacific and North American tectonic plates.
San Francisco, 1906: 7.8 magnitude earthquake caused by the San Andreas Fault.
New Madrid, 1811-1812: Series of earthquakes estimated to have had magnitudes of up to 7.5-7.7, caused by movement of the tectonic plates.
Mexico City, 1985: 8.1 magnitude earthquake caused by a subduction zone of the Cocos and North American plates.
Alaska, 1964: The earthquake of 1964 occurred in Alaska with a magnitude of 9.2. The movement of the Pacific plate and North American plate led to this earthquake. The movement of plates created the earth's crust to break, leading to the earthquake. A tsunami was also generated due to the earthquake, which led to severe destruction.
San Francisco, 1906: In San Francisco, the 1906 earthquake occurred due to the movement of the San Andreas fault line. The earthquake's magnitude was 7.8, and it resulted in the loss of over 3000 lives.
New Madrid, 1811-1812: This earthquake occurred along the New Madrid fault line, and it had a magnitude of 7.5-7.7. It occurred due to the movement of the tectonic plates.
Mexico City, 1985: In Mexico City, the earthquake occurred due to the movement of the Cocos plate and North American plate. The earthquake had a magnitude of 8.1, and it caused massive destruction, loss of life, and property damages.
For more such questions on earthquakes, click on:
https://brainly.com/question/17059684
#SPJ11
The probable question may be:
matching question:
match each of these major north american earthquakes with its cause/description.
alaska, 1964 alaska, 1964 drop zone empty. san francisco, 1906 san francisco, 1906 drop zone empty. new madrid, 1811-1812 new madrid, 1811-1812 drop zone empty. mexico city, 1985
causes: 7.8 magnitude earthquake caused by the San Andreas Fault, 8.1 magnitude earthquake caused by a subduction zone of the Cocos and North American plates, Series of earthquakes estimated to have had magnitudes of up to 7.5-7.7, caused by movement of the tectonic plates, 9.2 magnitude earthquake caused by a strike-slip fault of the Pacific and North American tectonic plates.
what element is missing from this diagram of the rock cycle? compacting and cementing sediment sedimentary rock weathering and erosion
The element that is missing from the diagram of the rock cycle is metamorphism.
What is the rock cycle?
The rock cycle is a natural process by which rocks are transformed into other forms. In simpler terms, the rock cycle is the transformation of one type of rock into another type of rock via numerous geological processes.
The rock cycle is composed of three main phases: Igneous rocks that form from molten rocks, Sedimentary rocks that form from weathered and eroded debris and Metamorphic rocks that form from heat and pressure.
What is metamorphism?
Metamorphism is a geological process that involves the transformation of pre-existing rocks into a different kind of rock.
Metamorphism can be caused by an increase in temperature, pressure, or both. In metamorphism, heat and pressure together cause changes in the mineral structure of the rocks, leading to the formation of metamorphic rocks.
In summary, the correct answer is Metamorphism is missing from the diagram of the rock cycle.
To know more about Metamorphism, refer here:
https://brainly.com/question/1366827
#SPJ11
which of the following is characteristic of most terrestrial biomes? which of the following is characteristic of most terrestrial biomes? clear boundaries between adjacent biomes vegetation demonstrating vertical layering a distribution predicted almost entirely by rock and soil patterns cold winter months
The majority of terrestrial biomes are characterised by distinct borders between neighbouring biomes. Although they are also typical in many terrestrial biomes.
vertical layering in plants and a distribution that is nearly totally predicted by rock and soil patterns are not ubiquitous. Only select biomes, such the temperate deciduous forest and taiga (boreal forest), are known for their chilly winters.The majority of terrestrial biomes are distinguished by clearly defined borders between them. While certain biomes may display vertical layering in plants and have a distribution that is partly affected by rock and soil patterns, they are not uniform properties across all biomes. However, only some biomes, such the temperate deciduous forest and taiga, typically have frigid winters. Not all biomes experience this (boreal forest).
learn more about terrestrial biomes here:
https://brainly.com/question/29766844
#SPJ4
what was your estimate of earth's albedo during the last glacial maximum? why should it be larger than the earth's current albedo of 0.30?
During the Last Glacial Maximum, it was estimated that Earth had an albedo of 0.32. Due to the greater coverage of ice and snow, it ought to be higher than the Earth's current albedo of 0.30.
During the Last Glacial Maximum, the Earth's albedo was estimated to be 0.32 .The ability to reflect sunlight into space is known as albedo. Sunlight is reflected by deserts, clouds, ice and snow, and aerosols . The more solar energy that is reflected, the higher the albedo; the chillier The albedo is also raised as the ice cover expands as the temperature drops.
The growing conditions for alpine grasslands on the TP, where Climate is the primary constraining factor, are improved by increased vegetation coverage, which results in a lower surface albedo and more energy absorbed.
To learn more about climate visit :
https://brainly.com/question/31139052
#SPJ4
to what extent do we think the geologies of the terrestrial worlds were destined from their births? explain.
The geological features of the terrestrial worlds have been influenced factors such as the initial composition of the protoplanetary disk, the planet's distance from the Sun, its size, the presence or absence of a magnetic field, and others.
The geological features of these planets are thus not predetermined from their birth but are influenced by various factors that continue to act on them.
The geological features of these planets are therefore not predetermined from their birth but are influenced by a variety of factors that continue to act on them.
What is the Terrestrial World?
Terrestrial planets, also known as rocky planets or telluric planets, are planets that are primarily composed of silicate rocks or metals. In contrast to gas giants, which are primarily composed of hydrogen and helium, terrestrial planets have a solid surface layer and a central core that is made up of metal. Mercury, Venus, Earth, and Mars are the four terrestrial planets in our solar system.
The geology of the terrestrial worlds is therefore dependent on a variety of factors, which include factors such as the planet's size, distance from the Sun, and its history of volcanic activity.
To know more about Terrestrial World, refer here:
https://brainly.com/question/29032123
#SPJ11
pulque production is increasing in the teotihuacan valley. true or false?
The statement pulque production is increasing in the teotihuacan valley is true as there is an increase in production.
In Mexico, especially in the central region, which includes the Teotihuacan Valley, the production of pulque is a traditional activity. For thousands of years, the maguey (agave) plant's sap has been used to make pulque, a fermented alcoholic beverage.
Due to competition from other alcoholic beverages and the urbanization of rural areas, pulque production has decreased in recent years, but there are still many small-scale producers in the area who continue to make pulque using traditional techniques.
To know more about teotihuacan valley here
https://brainly.com/question/28501226
#SPJ4
you are hiking in your favorite forest when you encounter a surface that appears to have very fine directional scratches in it. what are these features?
Answer:
The fine directional scratches that appear on a surface could be glacial striations. Glacial striations are scratches or gouges made in bedrock by rock fragments that are embedded in the base of a glacier. As the glacier moves over the bedrock, these rocks act like chisels, carving and scraping the rock beneath them. The scratches or grooves left behind can reveal the direction in which the glacier was moving.
When a glacier begins to melt due to warmer temperatures, the resulting water flows to the valley below carrying with it sediments, sand, and gravel, scraping it away and depositing it, and that sediment deposited by the glacier is called __________.
Answer:
The sediment deposited by the glacier is called glacial till.
When a glacier begins to melt due to warmer temperatures, the resulting water flows to the valley below carrying with it sediments, sand, and gravel, scraping it away and depositing it, and that sediment deposited by the glacier is called Till.
The sediment deposited by the glacier is known as till. This material is the debris of the glacier that has been transported by the ice and then deposited as it melts. The till deposits are characterized by the variable size of the particles and a lack of sorting by size. Additionally, the material is frequently unstratified and frequently has a random orientation of particles. Till can be found throughout many regions, including areas previously occupied by glaciers and ice sheets.
Learn more about glacier here: https://brainly.com/question/6666513
#SPJ11
why might intermediate water forming in the mediterranean sea flow at the same depth as intermediate water forming in the antarctic?
Intermediate water forming in the Mediterranean Sea might flow at the same depth as intermediate water forming in the Antarctic because both are formed under similar conditions.
The Mediterranean Sea has a dense water layer at a depth of about 300-500 meters, which originates from winter cooling and evaporation (the surface water becomes salty). This is known as Mediterranean Intermediate Water (MIW).
The Mediterranean is similar to the southern ocean around the Antarctic because the winter cooling produces a layer of dense water that sinks, creating Antarctic Intermediate Water (AAIW).Intermediate water flows at the same depth in the Mediterranean Sea and the Antarctic because both are formed under similar conditions.
Learn more about Mediterranean Antarctic depth https://brainly.com/question/820803
Societies thrive in areas with many natural ______________.
Answer: Societies thrive in areas with many natural resources.
Explanation:
Natural Resources: Natural resources are materials or substances that occur naturally in the environment and can be used for economic gain. These resources can be divided into two categories: renewable and non-renewable resources.
Renewable resources include things like solar energy, wind power, hydroelectricity, and biomass, which can be replenished over time.
Non-renewable resources, such as fossil fuels (coal, oil, natural gas) and minerals (gold, silver, copper), are finite and can be depleted over time.
Areas with abundant natural resources such as fertile land, forests, minerals, and oil reserves have often attracted investment, trade, and migration, leading to economic growth and prosperity.
Read more about Natural resources:
https://brainly.com/question/1082081
the dominant surface winds from the subtropics to high latitudes are the question 63 options: trade winds. westerlies. geostrophic winds. polar easterlies.
The dominant surface winds from the subtropics to high latitudes are the westerlies.
What are westerlies?The winds that blow from west to east in the middle latitudes are known as westerlies. These are observed mainly between 30 and 60 degrees north and south of the equator. As the earth spins on its axis, the Coriolis effect causes the westerlies to appear as westerly winds.
How do westerlies occur?At around 30 degrees north and south of the equator, rising hot air creates an area of low pressure. Air flows away from these low-pressure areas toward areas of high pressure at around 60 degrees north and south of the equator.
Why are westerlies considered significant?The westerlies have a significant impact on the Earth's climate, and they are an essential element of the global circulation system. They play a crucial role in the movement of weather systems across the globe, including storms, hurricanes, and mid-latitude cyclones.
To know more about westerlies refer here
https://brainly.com/question/12533653#
#SPJ11
whichtype of dune forms at right angles to the wind when there is abundant sand, a lack of vegetation and a constant wind direction
Sand dunes form when a wind-driven supply of sand accumulates in areas that have sparse vegetation and uniform wind direction. Dunes form in two main shapes: crescent-shaped (barchan) and transverse. Transverse dunes form at right angles to the prevailing wind, and are typically found in areas with abundant sand, sparse vegetation, and consistent wind direction.
These dunes form in three distinct steps. The first is called “saltation,” which is the process of sand particles being thrown up and carried away by the wind. As the sand accumulates, the wind is deflected and sand grains roll downwind, creating a mound. This mound becomes the second step of transverse dune formation, called “avalanching.” Finally, the sand particles become stationary, allowing the dune to take its shape.
The size of a transverse dune depends on the amount of sand present and the strength of the wind. The more sand, the larger the dune will become. In addition, when the wind is strongest, the sand can be carried farther upwind, resulting in larger dunes. As a result, transverse dunes can vary in size and shape.
Transverse dunes are an important part of the environment, providing habitats for animals and acting as barriers to protect coasts from storm surges. They are also important for trapping sediment and organic matter, helping to build soils and stabilize coasts. As such, it is important to maintain the health of transverse dunes by preserving them from human-induced erosion.
Know more about Sand dunes here:
https://brainly.com/question/2456718
#SPJ11
units a through k are sedimentary layers. l and m are intrusive igneous bodies. the surface of erosion below layer h represents a(n) period of time of about 100 years. true false
units a through k are sediment layers. l and m are intrusive igneous bodies. the surface of erosion below layer h represents a(n) period of time of about 100 years. is True
Long-term accumulations of sediment and debris that land on the earth's surface or in bodies of water typically result in the formation of sedimentary strata. Each layer can represent a distinct geological epoch or timeframe, based on the type of rock and the fossils found in it.The amount of time that a layer was exposed to erosion, weathering, or other geological processes is represented by the surface of erosion beneath it. The length of that period, however, will vary depending on a number of variables, including the type of rock, the environment, the area, and the level of erosion.
learn more about sediment here:
https://brainly.com/question/30080576
#SPJ1
The Phoenician script differs from other ancient scripts like Linear-A, Cuneiform and Hieroglyphs in thatA. it is alphabetic, meaning that each character represents a letter rather than a syllable or word.B. it is pictorial, meaning that each character represents a concept.C. it is cursive, meaning that the letters are joined together.D. it is syllabic, meaning that each character denotes a syllable O Sicily
The Phoenician script differs from other ancient scripts like Linear-A, Cuneiform and Hieroglyphs in that it is alphabetic, meaning that each character represents a letter rather than a syllable or word. Therefore, the correct answer is option A.
The Phoenician script was developed in the ancient city-state of Phoenicia, which is now Lebanon. It was one of the earliest writing systems and was used to write the Phoenician language. The script was also adapted by other languages, such as Hebrew and Aramaic.
Unlike pictorial scripts like hieroglyphs, which used pictures to represent concepts, the Phoenician script used letters to represent sounds. This made it a more efficient system for recording language. The Phoenician script was also different from cursive scripts like Linear-A, which were written in a flowing, connected style. Therefore, the correct answer is option A.
For more about Cuneiform and Hieroglyphs:
https://brainly.com/question/23050058
#SPJ11
pls do this asap its realy urgent
The distance in km between Santa Marta and Botafogo beach, can be found to be 4. 8 km.
A challenge potentially faced by the residents of Santa Marta is poor access to infrastructure and amenities.
What challenges are faced in squatter settlements ?Using maps of the Rio de Janeiro area in Brazil, it can be found that Santa Marta and Botafogo beach are 4. 8 km away from each other.
One common challenge that the people of Santa Marta could face is lack of access to basic infrastructure and services such as clean water, sanitation, and healthcare. They may also face the risk of eviction or displacement due to their illegal status, and struggle to access education and job opportunities. The squatter settlement may also lack proper safety measures, putting residents at risk of crime and other hazards.
Find out more on squatter settlements at https://brainly.com/question/23777460
#SPJ1
the largest earthen structure in north america, outside of mexico, is found at the site of .
The largest earthen structure in North America, outside of Mexico, is found at the site of Cahokia.
Cahokia is a UNESCO World Heritage site located in southern Illinois. It is known for its earthen mounds and was once the largest pre-Columbian settlement north of Mexico.
The city was built by the Mississippians, a Native American civilization that flourished in the Mississippi River valley from around 800 to 1500 AD.
The largest mound at Cahokia, known as Monks Mound, is a massive earthen structure that stands 100 feet tall and covers 14 acres of land.
It was likely used for ceremonial purposes and is believed to have been the focal point of the city. Other notable mounds at Cahokia include the Grand Plaza, which was likely used for public gatherings and ceremonies, and the Woodhenge, a circular arrangement of posts that may have been used for astronomical observations.
For such more question on Cahokia:
https://brainly.com/question/3378221
#SPJ11
which of the following hazards are typically associated with a shield volcano? (check all that apply) group of answer choices pyroclastic flows lahars lava flows tephra deposits volcanic gases
Shield volcanoes are typically associated with lava flows and volcanic gases.Lava flows are a common hazard associated with shield volcanoes as they have a low viscosity.
Shield volcanoes are known for their relatively gentle, broad slopes that gradually rise from the surrounding landscape.They are typically formed by the eruption of low-viscosity, basaltic lava, which tends to flow easily and quickly, allowing the volcano to spread out over a large area.Due to their shape and composition, shield volcanoes are generally considered to be less explosive than other types of volcanoes.Lava flows are a common hazard associated with shield volcanoes, as they can travel for long distances and potentially impact populated areas.Volcanic gases, including sulfur dioxide, carbon dioxide, and hydrogen sulfide, can also be emitted during eruptions and pose a health risk to humans and animals.Although shield volcanoes are generally less explosive, they can still produce explosive eruptions and eject tephra, which is a mixture of ash, rocks, and other debris.
learn more about Shield volcanoes here:
https://brainly.com/question/2715813
#SPJ1
what is the term used to describe the weather products that show how several atmospheric surface properties at one location change with time? group of answer choices sounding buoy plot meteogram radar display
Meteogram is the term used to describe weather products that show how several atmospheric surface properties at one location change with time.
A meteogram is a graphical representation of weather data, typically in a timeline format, including such variables as temperature, wind, atmospheric pressure, precipitation, and cloud cover.
Meteograms typically show a 24-hour forecast, and can often be customized to display a larger time window. The graphical nature of meteograms make them easy to interpret and can be used to identify trends and weather patterns quickly.
To learn more about weather here:
https://brainly.com/question/1034593#
#SPJ11
Define the term stressor??
something that causes a state of strain or tension.
Explanation:
"stressors can place a tremendous burden on relationships"
Answer: refers to a stress which stretches rocks in two opposite directions. the rocks become longer in a lateral direction and thinner in a vertical direction.
an important result of tensile stress is jointing in rocks.
describe the hydrologic cycle, rock cycle, and how the biosphere exchange matter with the other spheres.
The hydrologic cycle is the continuous movement of water from the atmosphere to the land and back to the atmosphere again. Water evaporates from the surface of the Earth and rises into the atmosphere, then condenses and forms clouds, and finally, falls as rain and snow.
The rain and snow then drains back to the surface, either infiltrating into the soil or flowing into rivers, streams, and lakes. The water then evaporates again and the cycle continues. The rock cycle is the continuous process by which sedimentary, igneous, and metamorphic rocks are formed.
Sedimentary rocks are formed when particles of sediment are compressed and cemented together over time. Igneous rocks form when molten material, or magma, cools and crystallizes. Metamorphic rocks form when existing rocks are exposed to extreme temperatures and pressures and transform into new types of rocks.
The biosphere exchange matter with the other spheres through a variety of processes. For example, organisms in the biosphere take in energy from the sun, matter from the lithosphere, and water and carbon dioxide from the atmosphere.
Plants in the biosphere also take in carbon dioxide from the atmosphere and release oxygen as a by-product. All of these exchanges are essential to the survival of organisms and the functioning of the biosphere.
TO KNOW ABOUT rock cycle:
https://brainly.com/question/29767269
#SPJ11
why might this be? (hint: what processes in both living and dead trees produce co2 ?) tropical rain forests also produce co2 due to living trees' respiration and decomposition of dead trees. due to this fact, relative consumption of co2 is not as great as has been expected.
Tropical rain forests produce CO2 due to both the respiration of living trees and the decomposition of dead trees. This leads to a lower relative consumption of CO2 than is expected.
Both living and dead trees contribute to the production of carbon dioxide (CO2) through respiration and decomposition processes. Living trees release CO2 through cellular respiration, which is the process by which they use oxygen to convert sugars into energy. Dead trees also release CO2 as they decompose, either through the action of microorganisms or through physical processes like wind and erosion.
While it's true that tropical rainforests produce CO2 through respiration and decomposition, they also play an important role in removing CO2 from the atmosphere through photosynthesis. Trees absorb CO2 from the air and use it to build their cells and grow, releasing oxygen as a byproduct. This process helps to offset the CO2 produced by other sources, such as human activities.
However, the extent to which tropical rainforests are able to absorb and sequester CO2 depends on a variety of factors, including the density and diversity of the forest, the health of the trees, and the availability of nutrients and water. Additionally, deforestation and other human activities that destroy or disrupt rainforest ecosystems can greatly reduce their ability to act as carbon sinks.
For more such questions on decomposition, click on:
https://brainly.com/question/13353160
#SPJ11
When rivers reach flood stage and overflow their banks, a large amount of __________ gets mixed in suspension and deposited.
When rivers reach flood stage and overflow their banks, a large amount of sediment gets mixed in suspension and deposited.
What happens when rivers reach flood stage?Rivers can cause great damage if they reach flood stage. The following are some of the most prevalent problems: Increased water velocity, which causes the erosion of stream banks and bases in some areas, exacerbating flood damage; Sediment and debris deposition along watercourses, which may create a hazardous and unstable river condition in the future. Some of the sediment deposits will eventually wash away as the water flow decreases.
However, the bulk of the sediment will stay where it has settled. Riverbanks, islands, and bars, as well as the river's bed, are all areas where sediment may collect.
Learn more about Rivers here: https://brainly.com/question/17667168
#SPJ11
determine the 6 most common minerals in a granite and place them in descending temperature of crytsallization
The six most common minerals in a granite are quartz, feldspar, mica, amphiboles, pyroxenes and olivine,
listed in descending order of temperature of crystallization.
Quartz: crystallizes at 573°C
Feldspar: crystallizes at 790°C
Mica: crystallizes at 860°C
Amphiboles: crystallizes at 950°C
Pyroxenes: crystallizes at 1,070°C
Olivine: crystallizes at 1,430°C
Quartz is the most abundant mineral in granite and gives it its hardness and durability. It also gives granite its characteristic translucent appearance.
Feldspar is the second most abundant mineral in granite and can be further classified as either orthoclase or plagioclase. Orthoclase feldspar is typically pink or cream-colored, while plagioclase feldspar is typically white or gray. Feldspar is responsible for the distinctive flecks of color in granite.
To know more about minerals in a granite, refer here:
https://brainly.com/question/14797104
#SPJ11