The equation of motion of the center of mass is given by x = v²/(2g).
The center of mass of an object is a point at which the object can be considered to be a particle with its entire mass concentrated at that point.
When an object moves through space, its center of mass also moves. In this question, we are asked to find the equation of motion of the center of mass of the baton when it is thrown vertically upward by a drum major.
The baton has a mass of m and that it is thrown vertically upward with an initial speed of v. The acceleration due to gravity is g.
We can find the maximum height that the baton reaches using the equation:v² = u² + 2gs
where v is the final velocity, u is the initial velocity, g is the acceleration due to gravity, and s is the maximum height that the baton reaches.
Since the baton is thrown vertically upward, the initial velocity is v0 = v and the final velocity is zero. So we have:v² = 2gsor:s = v²/(2g).
We can assume that the center of mass moves in a straight line from its initial position to its maximum height and then back down to its original position.
We can find the time taken for the baton to reach its maximum height using the equation:s = ut + (1/2)at²
where u is the initial velocity, a is the acceleration, and t is the time taken. In this case, u = v, a = -g (since the baton is moving upwards), and s = v²/(2g). So we have:v²/(2g) = vt - (1/2)gt²
Solving for t, we get:t = v/gNow we can write the equation of motion of the center of mass of the baton using the equation:x = ut + (1/2)at².
where x is the position of the center of mass, u is the initial velocity (zero), a is the acceleration due to gravity (g), and t is the time taken. So we have:x = (1/2)gt²
x = (1/2)(v/g)² = v²/(2g)The center of mass of the baton moves up to a maximum height of v²/(2g) and then comes back down to its original position.
Hence, The equation of motion of the center of mass is given by x = v²/(2g).
to know more about center of mass refer here:
https://brainly.com/question/28996108#
#SPJ11
if you stand 8 m in front of a plane mirror and focus a camera on yourself, for what distance is the camera now focused?
The camera should be now focused at a distance of 16 meters.
The camera, in this case, should focus on the distance from the mirror to the object reflected by the mirror. The distance should be twice the distance of the object to the mirror.
The mirror image and the object should be equidistant from the mirror. This implies that the distance of the object from the mirror is equal to the distance of the mirror image from the mirror.
The distance that the camera should focus on is equal to the distance from the object to the mirror, multiplied by 2. Therefore, Distance from the object to the mirror = 8 meters
Distance from the camera to the object = distance from the mirror to the object, which is twice the distance from the mirror to the object
Distance from the camera to the object = 2 × 8 meters = 16 meters
Therefore, the camera should be focused at a distance of 16 meters.
To know more about the mirror image click here:
https://brainly.com/question/3663586
#SPJ11
a metal object is suspended from a spring scale. the scale reads 920 n when the object is suspended in air, and 750 n when the object is completely submerged in water. a. draw a diagram showing the three forces acting on the submerged object. b. find the volume of the object. c. find the density of the metal.
A metal object is suspended from a spring scale are: the three forces acting on the submerged object are buoyant force, gravitational force, and tension force. The gravitational force is responsible for pulling the object downwards. The buoyant force is responsible for pushing the object upwards due to the density of the liquid. The tension force is responsible for maintaining the equilibrium of the object.
To find the volume of the object, we need to use the formula: Volume of the object = Mass of the object / Density of the object .The mass of the object can be calculated using the gravitational force: Mass of the object = Gravitational force / Acceleration due to gravity (g)Mass of the object = 920 N / 9.8 m/s²Mass of the object = 93.87 kg.
The density of the object can be calculated using the formula: Density of the object = Mass of the object / Volume of the object. The volume of the object can be calculated using the equation: Volume of the object = (Gravitational force - Buoyant force) / Density of the fluid Volume of the object = (920 N - 750 N) / (1000 kg/m³)Volume of the object = 0.17 m³c. Now we have the mass and volume of the object.
Using these values, we can calculate the density of the metal using the formula: Density of the object = Mass of the object / Volume of the object Density of the object = 93.87 kg / 0.17 m³Density of the object = 552.76 kg/m³The density of the metal is 552.76 kg/m³.
To know more about :
https://brainly.com/question/5647066#
#SPJ11
A mass is tied to a string and swung in a horizontal circle w a constant angular speed. Speed is doubled. What happens to the tension in the string?
The tension in the string becomes four times its original value when the angular speed is doubled.
When a mass is tied to a string and swung in a horizontal circle with a constant angular speed, the tension in the string is the centripetal force that keeps the mass moving in a circular path.
Step 1: Identify the relevant forces acting on the mass.
In this case, the centripetal force is the only force that needs to be considered, and it is provided by the tension in the string.
Step 2: Understand the relationship between centripetal force (Fc),
mass (m),
radius (r),
and angular speed (ω).
The centripetal force can be calculated using the formula:
Fc = m * r * ω^2
Step 3: Analyze the effect of doubling the speed (angular speed) on the tension in the string. Since the mass and radius remain the same, we can focus on the angular speed term in the formula.
When the angular speed is doubled, we have:
New angular speed (ω') = 2 * ω
Step 4: Calculate the new centripetal force (tension) in the string.
Substituting the new angular speed into the formula, we get:
Fc' = m * r * (ω[tex]')^2[/tex] = m * r * (2 * ω[tex])^2[/tex]
Step 5: Compare the new centripetal force (tension) with the original one. By expanding the equation, we find that:
Fc' = m * r * 4 * ω^2
= 4 * (m * r * ω[tex]^2)[/tex]
= 4 * Fc
This shows that when the angular speed is doubled, the tension in the string increases by a factor of 4.
For similar question on angular.
https://brainly.com/question/13014974
#SPJ11
Drag and drop the terms to correctly complete the prompt.
Current is produced in a conductor when it is moved through a
applying a force on the
in the conductor and causing them to
of generating current in a conductor by placing the conductor in a changing magnetic field is called
is no
because the magnetic lines of force are
:: physical connection
between the conductor and the magnet. The current is said to be induced in the conductor by the
magnetic field. The conductor, which is often a piece of wire, must be
to the magnetic lines of force in
order to produce the maximum force on the free electrons. The direction that the induced current flows is determined by the direction
of the lines of force and by the direction the wire is moving in the field.
This process
:: free electrons :: induction :: perpendicular :: move
There
::magnetic field
We can see here that correctly completing this prompt, we have:
Current is produced in a conductor when it is moved through a magnetic field. This process of applying a force on the free electrons in the conductor and causing them to move.
This process of generating current in a conductor by placing the conductor in a changing magnetic field is called induction. There is no physical connection between the conductor and the magnet. The conductor, which is often a piece of wire, must be perpendicular to the magnetic lines of force in order to produce the maximum force on the free electrons.
What is current?In physics, current refers to the flow of electric charge in a circuit. It is measured in amperes (A) and is defined as the amount of charge that passes through a point in a circuit per unit time. In other words, current is the rate of flow of electric charge.
Current can flow through a variety of materials, such as wires or conductive solutions, and is driven by a potential difference, or voltage, between two points in a circuit.
Learn more about current on https://brainly.com/question/1100341
#SPJ1
how fast is it moving when it reaches the top of its trajectory if the projectile is fired at a speed of 138 and an upward angle of 65 degrees?
The projectile will be moving at a speed of 57.21 m/s when it reaches the top of its trajectory.
When a projectile is fired at a speed of 138 and an upward angle of 65 degrees, the speed at the top of the trajectory can be calculated. To solve this problem, you need to understand some basic physics concepts. Here's how you can solve this problem:
1. First, identify the given values and write them down:
Initial velocity (u) = 138 m/s
Angle of projection (θ) = 65 degrees
Acceleration due to gravity (g) = 9.81 m/s²
2. Now, break down the initial velocity into its horizontal and vertical components:
Initial velocity in the horizontal direction = u cos θ
Initial velocity in the vertical direction = u sin θ
3. Use the equation of motion to calculate the time taken by the projectile to reach the top of its trajectory:
u sin θ = gt/2
t = 2u sin θ/g
4. Use the time obtained in step 3 to calculate the velocity at the top of the trajectory:
v = u cos θ
Where,
v = final velocity
u = initial velocity
θ = angle of projection
5. Substitute the given values in the equation to get the final answer:
v = u cos θ
v = 138 cos 65
v = 57.21 m/s
for such more question on projectile
https://brainly.com/question/24216590
#SPJ11
the centripetal force in a collapsing cloud of gas and dust is strongest at the poles question 9 options: true false
The given statement "centripetal force in a collapsing cloud of gas and dust is strongest at the poles" is - True.
Centripetal force refers to a force that drives an object toward a fixed point, which is the center of a circular path. For example, if you tie a ball to a string and whirl it around in a circle, the string exerts a centripetal force on the ball that keeps it moving in a circle.
The force of gravity is the most common centripetal force that we encounter in nature, and it is what drives the movement of planets, moons, and other celestial objects.
During the formation of a star, a cloud of gas and dust collapses inwards due to gravity. The cloud starts to rotate as it shrinks due to the law of conservation of momentum. The centripetal force in this situation is the gravitational force that holds the cloud together.
The gravitational force, on the other hand, is stronger at the poles of the cloud. The gravitational force increases as the distance between the particles in the cloud decreases. Because the poles of the cloud are closer together, the gravitational force is stronger, and the centripetal force is also stronger.
As a result, the centripetal force in a collapsing cloud of gas and dust is strongest at the poles.
To know more about centripetal force click here:
https://brainly.com/question/14249440
#SPJ11
The sound level produced by one singer is 71.8 dB. What would be the sound level produced by a chorus of 45 such singers (all singing at the same intensity at approximately the same distance as the original singer)? Answer in units of dB.
The sound level produced by a chorus of 45 singers would be approximately 88.3 dB.
How to find the sound level produced by a chorus of 45 singers?Assuming that the sound level of each singer is independent and the same, the sound level produced by a chorus of 45 singers can be calculated using the following formula:
L2 = L1 + 10 log (N2/N1)
where:
L1 = the sound level of one singer = 71.8 dB
N1 = the number of singers in the original group = 1
N2 = the number of singers in the new group = 45
L2 = the sound level of the new group
Substituting the values in the formula, we get:
L2 = 71.8 + 10 log (45/1)
L2 = 71.8 + 10 log (45)
L2 = 71.8 + 16.5
L2 = 88.3 dB
Therefore, the sound level produced by a chorus of 45 singers would be approximately 88.3 dB, assuming all the singers are singing at the same intensity at approximately the same distance as the original singer.
Learn about sound level here https://brainly.com/question/15118883
#SPJ1
in a radio telescope, the role that the mirror plays in visible-light telescopes is played by: a. a spectrometer b. an interferometer c. a special kind of lens d. computer software e. a large metal dish (antenna)
In a radio telescope, the role that the mirror plays in visible-light telescopes is played by a large metal dish (antenna).
A radio telescope works by collecting and analyzing radio waves emitted by celestial objects. To collect these radio waves, the radio telescope has a large metal dish, also known as an antenna.
This metal dish gathers radio waves from space and reflects them into the radio telescope's receiver.Spectrometer is a scientific instrument used to measure the intensity of different wavelengths of light in a spectrum.
It is an essential tool for astronomers as it helps to understand the nature of celestial objects by analyzing the light that they emit.Interferometer is a device used in radio telescopes to improve the resolution of images.
It is used to combine the signals from multiple telescopes, allowing astronomers to study more distant objects with greater accuracy.
Special lenses are used in visible-light telescopes to focus light onto the detector or camera. They help to produce clear images by reducing distortions caused by aberrations and other optical imperfections.
Computer software is used in all types of telescopes to process and analyze the data collected by the telescope.
It allows astronomers to create images, measure the intensity of different wavelengths of light, and make other calculations.
The role that the mirror plays in visible-light telescopes is replaced by a large metal dish in radio telescopes, which collects and reflects radio waves into the telescope's receiver.
to know more about telescope refer here:
https://brainly.com/question/556195#
#SPJ11
we see two stars separated by one degree on the celestial sphere. what can we infer about these stars?
The two stars separated by one degree on the celestial sphere imply that they are relatively close together.
This can be determined by the degree measurement, as one degree of arc is roughly equivalent to one-sixtieth of a degree of the Earth's circumference.
This implies that the two stars are relatively close together in terms of the celestial sphere, meaning they may even be located within the same constellation.
In addition to their proximity, the degree of separation between the two stars may also indicate that they are physically close together.
The further apart two stars appear in the night sky, the further away they actually are from one another. Therefore, a one-degree separation implies that the stars are quite close together in space.
The relative closeness of the stars may also have implications for their age and luminosity.
Stars that are relatively close together in space will have been formed from the same nebula, meaning they will likely be of the same age and share similar luminosities.
The degree of separation between the two stars may even provide an indication of how they were formed, potentially indicating that they were formed in the same event or were ejected from the same star system.
Two stars separated by one degree on the celestial sphere are likely to be quite close together in terms of the night sky, physical proximity, and age/luminosity.
Understanding the degree of separation between the two stars can provide valuable information regarding the formation and proximity of these two stars.
to know more about celestial sphere refer here:
https://brainly.com/question/13196153#
#SPJ11
which term defines the distance from rest to crest, or from rest to trough?responsesamplitudeamplitudefrequencyfrequencyperiodperiodspeed
Amplitude is not measured from peak to trough, but from rest to peak or rest to trough.
The highest and lowest points on the surface of a wave are called crests and troughs respectively. The vertical distance between the peak and the trough is the height of the waves. The horizontal distance between two successive peaks or troughs is called the wavelength.
The amplitude of a wave is the maximum displacement of a particle on a medium with respect to its position of rest.
The amplitude can be thought of as the distance between rest and the peak. The amplitude from the rest position to the dip position can be measured in a similar manner.
To know more about Crest and trough, visit,
https://brainly.com/question/17778036
#SPJ4
an aluminum bar 3.78 m long has a rectangular cross section 1.18 cm by 5.23 cm . part a what is its resistance?
The resistance of the given aluminum bar is approximately [tex]1.62 \times 10^{-4} \ \Omega m[/tex].
To calculate the resistance of the aluminum bar, we need to use the formula:
[tex]R = (\rho \times L) / A[/tex]
Where R is the resistance, ρ is the resistivity of aluminum, L is the length of the bar, and A is the cross-sectional area of the bar.
The resistivity of aluminum is approximately [tex]2.65 \times 10^{-8}[/tex] ohm-meters (Ωm).
First, we need to convert the dimensions of the cross-sectional area from centimeters to meters:
1.18 cm = 0.0118 m
5.23 cm = 0.0523 m
Then, we can calculate the cross-sectional area of the bar:
[tex]A = (0.0118\ m) \times (0.0523\ m) = 6.16654 \times 10^{-4} \ m^2[/tex]
Now we can substitute the values into the formula for resistance:
[tex]R = (2.65 \times 10^{-8} \Omega m \times 3.78 m) / (6.16654 \times 10^{-4} \ m^2)[/tex]
[tex]R = 1.62 \times 10^{-4}[/tex]
Hence the resistance is [tex]1.62 \times 10^{-4} \ \Omega m[/tex].
Learn more about resistance:
https://brainly.com/question/17010736
#SPJ11
what is the relationship between index of refraction and the speed of the light in the medium of the index of refraction?
The relationship between the index of refraction and the speed of light in a medium is that the higher the index of refraction is: the slower the speed of light in that medium
The index of refraction is a measure of how much a light ray is bent, or refracted, as it enters a material or medium. The amount of refraction increases as the index of refraction increases, which in turn causes light to travel slower in the medium.
The index of refraction is related to the speed of light in the medium because the amount of refraction affects the speed of light in that medium. The index of refraction is a ratio between the speed of light in a vacuum and the speed of light in a medium.
This is calculated as the speed of light in a vacuum (c) divided by the speed of light in the medium (v). This ratio is usually represented as n, and so the formula for the index of refraction is: n = c/v. As the index of refraction increases, the speed of light in the medium decreases.
In a medium with a low index of refraction, the speed of light is higher than in a medium with a higher index of refraction. This is because a low index of refraction means that the light ray is not being refracted very much, so it is able to travel faster.
A higher index of refraction means that the light ray is being refracted more, so it is forced to travel slower. This explains the relationship between the index of refraction and the speed of light in a medium; the higher the index of refraction, the slower the speed of light in that medium.
To know more about the index of refraction refer here:
https://brainly.com/question/23750645#
#SPJ11
how does the conservation of angular momentum explain the increased speed of a planet in its orbit at perihelion? quizley
The conservation of angular momentum explains that a planet moves faster at perihelion due to an increase in angular velocity, resulting in an increase in linear velocity.
The conservation of angular momentum can be found as:
The conservation of angular momentum is a fundamental principle in physics that states that the total amount of angular momentum in a system remains constant unless acted upon by an external force.According to the law of conservation of angular momentum, when a planet moves closer to the Sun at perihelion, the decrease in distance causes the angular momentum to remain constant. Therefore, the velocity of the planet must increase to compensate for the decrease in distance. At perihelion, which is the point in the planet's orbit where it is closest to the Sun, the planet is moving faster than at any other point in its orbit.This is because as the planet gets closer to the Sun, the gravitational force between the two objects gets stronger, causing the planet to speed up in order to maintain its angular momentum.The closer the planet is to the Sun, the faster it has to move to keep from falling into it due to the strong gravitational pull.Therefore, the conservation of angular momentum explains why a planet speeds up at perihelion because the planet has to maintain its angular momentum as it gets closer to the Sun.To learn more about the angular momentum: https://brainly.com/question/4126751
#SPJ11
problem 3. a ramp of mass m is at rest on a horizontal surface. a small cart of mass m is placed at the top of the ramp and released. what are the velocities of the ramp and the cart relative to the ground at the instant the cart leaves the ramp?
At the instant where the cart leaves the ramp, the velocities of the ramp and the cart are relative to the ground as [tex](mgh/m+M)^{1/2}[/tex] and [tex](2gh(m+M)/3m)^{1/2}[/tex] respectively.
The velocities of the ramp and cart relative to the ground at the instant the cart leaves the ramp can be calculated using conservation of energy and momentum. The velocity of the cart relative to the ground can be found using conservation of energy as follows:
mgh = 1/2mv² + 1/2Iw²
where m is mass of cart, g is acceleration due to gravity, h is height of ramp, v is velocity of cart relative to ground, I is moment of inertia of ramp about its center of mass and w is angular velocity of ramp about its center of mass.
The velocity of ramp relative to ground can be found using conservation of momentum as follows:
mv = (m+M)V
where M is mass of ramp and V is velocity of ramp relative to ground.
Solving these equations simultaneously gives:
[tex]V = mgh/(m+M)^{1/2}[/tex]
[tex]v = 2gh(m+M)/(3m)^{1/2}[/tex]
where h = height of ramp.
Therefore, at the instant when cart leaves the ramp, velocity of cart relative to ground will be [tex](2gh(m+M)/(3m))^{1/2}[/tex] and velocity of ramp relative to ground will be [tex](mgh/(m+M))^{1/2}[/tex].
To know more about relation between velocity and ground, refer:
https://brainly.com/question/20237
#SPJ4
a 4.4 hz continuous wave travels on a slinky. if the wavelength is 0.55 m, what is the speed of waves on the slinky (in m/s)? m/s
The speed of waves on the slinky is 2.42 m/s.
The speed of a wave is the distance it travels in a given amount of time.
The speed of waves on the slinky can be calculated using the equation:
v=fλ
where v is the wave speed, f is the frequency, and λ is the wavelength).
Using the given values of f=4.4 Hz and λ=0.55 m, we can calculate the speed of the wave to be 2.42 m/s.
So, the wave is traveling at a speed of 2.42 m/s, which means that it will travel 2.42 meters in one second.
The frequency of the wave is 4.4 Hz, which means that the wave completes one cycle in 0.23 seconds. Since the wave is traveling at a speed of 2.42 m/s, this means that it will take 0.23 seconds for the wave to complete one cycle.
Therefore, the speed of waves on the slinky traveling with a frequency of 4.4 Hz and having a wavelength of 0.55m is 2.42 m/s.
To know more about the speed of waves, refer here:
https://brainly.com/question/10715783#
#SPJ11
the air in an organ pipe is replaced by helium (which has a lower molar mass than air) at the same temperature. how does this affect the normal-mode wavelengths of the pipe?
The normal-mode wavelengths decrease when the air in an organ pipe is replaced by helium, at the same temperature. This is because helium has a lower molar mass than air, and therefore a lower speed of sound, which causes the normal-mode wavelengths to decrease.
The normal-mode wavelengths are determined by the length of the pipe L and the speed of sound in the pipe
V.λn = 2L/nVn is the index of the mode, which can be any integer.
When helium is used instead of air, the speed of sound in the pipe rises because the mass of the helium molecules is smaller than that of the air molecules, so the gas molecules must travel quicker to achieve the same speed. Because the wavelength of a standing wave must fit into the pipe precisely, the increase in velocity causes the wavelength to decrease. The normal-mode wavelengths will be lowered as a result of this.
Thus, the answer is the normal-mode wavelengths decrease.
Learn more about wavelengths at https://brainly.com/question/10728818
#SPJ11
the north pole of a bar magnet is moved close to the north pole of another bar magnet that is suspended by a thread. how does the energy stored in the magnetic field change?
Answer:
The energy stored in the field decreases because the magnet moves in the direction of the field.
Explanation:
a 13-kg k g hammer strikes a nail at a velocity of 7.8 m/s m / s and comes to rest in a time interval of 8.4 ms m s . part a what is the impulse given to the nail?
The impulse given to the nail is -101.527616 J (Joules).
The impulse given to the nail if a 13-kg hammer strikes a nail at a velocity of 7.8 m/s and comes to rest in a time interval of 8.4 ms is calculated using the formula J = FΔt.
Here, F is the force, Δt is the time interval, and J is the impulse. Use the given information to solve the question. Here, m/s stands for meters per second, and ms stands for milliseconds.
F = maF = m (Δv / Δt)
where, m is the mass of the hammer, and Δv is the change in velocity of the hammer.
Δv = -7.8 m/s (negative because the hammer is coming to rest)
Δt = 8.4 ms = 0.0084 s
F = 13 kg x (-7.8 m/s) / 0.0084 sF = -12095.24 N
The force exerted on the nail is -12095.24 N.
The impulse given to the nail is J = FΔt.
J = -12095.24 N x 0.0084 sJ = -101.527616 J (Joules)
Therefore, the impulse given to the nail is -101.527616 J (Joules).
To know more about impulse click here:
https://brainly.com/question/30466819
#SPJ11
Calculate the number of moles in 6g of c
a gun is fired with muzzle velocity 1000 feet per second at a target 4050 feet away. find the minimum angle of elevation necessary to hit the target.
The minimum elevation angle necessary to hit the target 4050 feet away with a muzzle velocity of 1000 feet per second is 45 degrees.
Let α be the angle of elevation at which the gun is aimed.
Then, tan α = Opposite Side / Adjacent Side
tan α = 4050 / (1000 * time of flight)
Let h be the target's height above the gun's level.
Since the target's altitude is unknown, we'll assume it to be h = 0.
Since the gun is fired horizontally, its initial velocity has no vertical component. In the vertical direction, the projectile is influenced solely by gravity.
Since the horizontal distance traveled by the projectile is 4050 feet and the initial velocity is 1000 feet per second,
t = (4050 / 1000) seconds
On substituting the value of t,
we get, tan α = 4050 / (1000 * 4.05)
tan α = 1
Therefore, the angle of elevation of the gun is 45°.
Learn more about the Angle of elevation here:
https://brainly.com/question/88158
#SPJ11
jupiter rotates once every 0.41 days. at what orbital radius will a satellite maintain a constant position?
The orbital radius at which a satellite would maintain a constant position with the Jupiter is equal to 7.14 x 10^6 meters.
Jupiter is the largest planet in our solar system. To determine the radius at which a satellite would maintain a constant position, we first need to determine the time it takes for a satellite to complete one orbit around Jupiter and then relate it to the radius using the Kepler's law of planetary motions.
According to Kepler's third law, the period of a planet's orbit squared is equal to the size semi-major axis of the orbit cubed when it is expressed in astronomical units. The relation between different parameters can be given as follows:
T^2 = (4π^2 / GM) x R^3
where: T = the time it takes for the satellite to complete one orbit
M = the mass of Jupiter
R = the radius of orbit
G = the gravitational constant
To maintain a constant position, the orbital radius of the satellite must be same as that of Jupiter which is equal to 0.41 days. Substituting the values in the above equation and solving for R, we get:
R^3 = T^2 x (GM/4π^2)
⇒ R^3 = [tex]R^3 = \frac{(6.6743 * 10^-11)(1.898*10^27)}{4(3.14)^2} *(0.41)^2[/tex]
∴ R ≅ 7.14 x 10^6 meters
Learn more about Kepler's law of planetary motion at:
brainly.com/question/22424027
#SPJ4
a car is traveling at 40 m/s as it enters a turn of radius 25 meters. what minimum coefficient of friction must be maintained between the road and tires to make sure the car does not slide out of the turn?
The minimum coefficient of friction required for a car travelling at 40 m/s to not slide out of a turn of radius 25 meters is 0.21.
This is determined using the equation for the maximum centripetal force that the car can withstand. This equation states that the maximum centripetal force is equal to the mass of the car times its speed squared divided by the radius of the turn multiplied by the coefficient of friction. Using this equation, 0.21 is the coefficient of friction that is required to make sure the car does not slide out of the turn.
The equation for maximum centripetal force can be written as:
F = m*v2/r * μ Where m is the mass of the car, v is the velocity of the car, r is the radius of the turn, and μ is the coefficient of friction.
Since we are solving for the coefficient of friction (μ), we can solve this equation for μ:
μ = m*v2/r * F
Plugging in the given values, we get:
μ = (1000 kg) * (40 m/s)2 / (25 m) * (10000 N) = 0.21
Therefore, the minimum coefficient of friction required for a car travelling at 40 m/s to not slide out of a turn of radius 25 meters is 0.21.
For more such questions on Coefficient of friction.
https://brainly.com/question/22696010#
#SPJ11
The formula for speed is Total Distance / Total Time. Based on the data table below, what is the
average speed after 2 minutes? Please show all calculations.
Time (min.) Distance (m)
0
1
2
3
0
50
75
90
Answer:
To find the average speed after 2 minutes, we need to calculate the total distance covered in 2 minutes and divide it by 2.
Total Distance after 2 minutes = 75m
Total Time after 2 minutes = 2 minutes
Average Speed after 2 minutes = Total Distance / Total Time
Average Speed after 2 minutes = 75m / 2 min = 37.5 m/min
Therefore, the average speed after 2 minutes is 37.5 m/min.
I Hope This Helps!
if you had a microscope which was capable of doing this, what would the frequency of electromagnetic radiation be, in hertz, that you would have to use?
Answer:
The electric power didn’t last very long. It lasted only as long as the chemical reaction in the battery.
Explanation:
if one replaces the conducting cube with one that has positive charge carriers, what is the direction of the induced electric field?
If the conducting cube is changed or replaced with other one has a positive charge carriers then there will be no change in electric field.
The direction of the generated electric field remains the same, opposing the change in magnetic flux, if the conducting cube is switched out for a conducting cube with positive charge carriers.
This is caused by the electromagnetic induction law of Faraday, which states that a shifting magnetic field causes a shifting electric field. Lenz's law states that the generated electric field always operates in the opposite direction to the change in magnetic flux that caused it.
The right-hand rule for electromagnetic induction should be used to identify the direction of the generated electric field. The thumb of the right hand points towards the direction of the shifting magnetic field if the fingers are curled in this manner.
Learn more about electric field at
https://brainly.com/question/17091984
#SPJ4
how long does it take electrons to get from a car battery to the starting motor? assume the current is 300a and the electrons travel through a copper wire with cross-sectional area 0.21 cm and length 0.85 m
The time it takes for the electrons to get from the car battery to the starting motor is 353 ms.
To calculate the time it takes for electrons to get from a car battery to the starting motor, we can use Ohm's law. According to Ohm's law, the current (I) through a wire is equal to the voltage (V) divided by the resistance (R). In this case, the current is 300A and the resistance is equal to the resistance of the copper wire (R = ρL/A), where ρ is the resistivity of copper, L is the length of the wire, and A is the cross-sectional area. Using this information, the resistance of the copper wire is 0.85Ω. Therefore, the time it takes for the electrons to get from the car battery to the starting motor is equal to the voltage divided by the resistance, or 300V/0.85Ω = 353 ms.
To explain further, current is a measure of the amount of electrons passing through a conductor, in this case the copper wire, in a certain amount of time. Voltage is a measure of the energy per unit of charge, meaning it is how much energy each electron will have when it passes through the wire. Resistance is a measure of the opposition that a material has to the flow of electric current. In this case, the resistance of the copper wire is equal to the resistivity of the copper, multiplied by the length of the wire, divided by the cross-sectional area of the wire. Using this information, the time it takes for the electrons to get from the car battery to the starting motor can be calculated as 300V/0.85Ω = 353 ms.
For more such questions on Electrons.
https://brainly.com/question/30283369#
#SPJ11
10. if both elements of the water heater in this residence are energized at the same time, how much current will they draw? (assume that each element is rated at 240 volts at 4500 watts.)
If both elements of the water heater in this residence are energized at the same time, they will draw 37.5 amperes of current. Each element of the water heater is rated at 240 volts at 4500 watts.
To calculate the current drawn by each element, we can use Ohm's law: V = IR, where V is the voltage, I is the current, and R is the resistance.
The resistance of each element can be calculated using the formula: [tex]R = V^2/P[/tex], where R is the resistance, V is the voltage, and P is the power.
So, the resistance of each element is:
[tex]R = V^2/P[/tex]
[tex]R = 240^2/4500[/tex]
R = 12.8 ohms
When both elements are energized at the same time, they are connected in parallel. The total resistance of two resistors in parallel can be calculated using the formula:
1/R_total = 1/R1 + 1/R2
So, the total resistance of the two elements is:
1/R_total = 1/12.8 + 1/12.8
1/R_total = 0.15625
R_total = 6.4 ohms
Now, we can use Ohm's law to calculate the current drawn by both elements:
I = V/R_total
I = 240/6.4
I = 37.5 amperes
for such more question on current
https://brainly.com/question/1100341
#SPJ11
a bike and rider, 82.0 kg combined mass, are traveling at 4.2 m/s. a constant force of -140 n is applied by the brakes in stopping the bike. what braking distance is needed?
The bike and rider must halt at a breaking distance of 5.17 meters.
What is the formula for braking distance?d=2.2v+fracv220 gives the braking distance, in feet, of a car moving at v miles per hour. Most motorcycle riders have a maximum braking force (what an experienced rider can do) of about 1 G, which, at 45 mph, results in a complete stop of the motorcycle in 67 feet (20 meters).
To resolve this issue, we can apply the equation of motion for uniformly accelerated motion:
v² = u² + 2as
To solve for s, we can rewrite the equation as follows:
s = (v² - u²) / (2a)
We are aware that the acceleration is determined by dividing the net force by the mass:
a = F_net / m
where m is the mass and F net is the net force.
a = F_net / m = -140 N / 82.0 kg
= -1.71 m/s²
We may now change the values for s in the equation:
s = (0² - 4.2²) / (2*(-1.71))
= 5.17 m
To know more about breaking distance visit:-
https://brainly.com/question/30957529
#SPJ1
NEED HELP ASAP!!!!!!!!!!!!
Part B
Tape a meter stick to the side of the table. Make sure the zero end is on the floor. Carry out the experiment using the four drop heights you chose in task 1, part D. (You may want to have an adult drop the ball while you watch how high it bounces.) Perform three trials for each drop height, and record the data in the table. (You may choose to video the bounces and watch the video in slow motion to improve your data collection.) Finally, average the bounce height measurements to get a final reading. Round the average bounce heights to the nearest whole number.
Drop Height
First Drop
Bounce Height
Second Drop
Bounce Height
Third Drop
Bounce Height
Average Bounce Height
Which of the following best defines energy?
the ability to do work
the resistance to motion
how fast an object moves
amount of force in a given time
Answer:
The Ability to do work
Explanation:
energy is needed to do work because without energy no work can be done due to the fact that there is no energy