Dilate Triangle XYZ: X (1,1) Y (2,2), and Z (3,0), (xy)-= (2x, 2y) centered at point X.

X’(. )
Y’(. )
Z’(. )

The simplified expression after doing this calculation is -1/3. To perform the addition or subtraction and simplify the given expression, we need to find a common denominator for the two fractions. The common denominator for x and 3 is 3x.

Multiply each fraction by the necessary factor to get the common denominator. For the first fraction, we multiply by 3/3, and for the second fraction, we multiply by x/x.

3/3 * (x/x) - x/x * (4/3) = (3x - 4x)/3x = (-x)/3x. Now, we can simplify the expression by canceling out the common factor of x in the numerator and denominator. (-x)/3x = -1/3

The simplified expression is -1/3.

Know more about fraction here:

https://brainly.com/question/10354322

#SPJ11

Step-by-step explanation:

cost1(t) = 100.25t + 6500

cost2(t) = 225.5t + 4496

both companies charge the same for the amount of t (tons), when both functions deliver the same result :

100.25t + 6500 = 225.5t + 4496

2004 = 125.25t

t = 2004/125.25 = 16

1. for the transport of 16 tons of sugar they both charge the same.

2. that charge is

100.25×16 + 6500 = $8,104

The set W represents the x-axis and y-axis in the plane. Any vector with one of its components equal to 0 will satisfy the equation x⋅y = 0, and these vectors lie on either the x-axis or y-axis.

(a) The set W is closed under standard scalar multiplication in the plane. This is because for any scalar c and any vector u = (x,y) in W, the product of the components of cu = (cx,cy) is (cx)(cy) = c2(xy) = c2(0) = 0, so cu is also in W.

(b) The set W is not closed under standard vector addition in the plane. For example, the vectors u = (1,0) and v = (0,1) are both in W, but their sum u + v = (1,1) is not in W because the product of its components is 1(1) = 1, which does not satisfy the equation x⋅y = 0.

Since the set W is not closed under standard vector addition, it does not form a vector space. A set must be closed under both scalar multiplication and vector addition in order to be a vector space.

Geometrically, the set W represents the x-axis and y-axis in the plane. Any vector with one of its components equal to 0 will satisfy the equation x⋅y = 0, and these vectors lie on either the x-axis or y-axis.

Learn more about vectors

brainly.com/question/29740341

#SPJ11

The time taken for Ben's ball to land after Andrew's ball is 2.5 seconds.

To calculate the time taken for the Ben's ball to land after Andrews ball is calculated as follows;

Since the value of parameter a is -5 for both balls, the height of each ball follows the equation:

h(t) = -5t² + vt + h0

where;

Let's assume that Andrew's ball is hit with an initial velocity of v1, and Ben's ball is hit with an initial velocity of v₂. We also know that Ben's ball reaches a maximum height 50% greater than Andrew's, which means that:

h_max2 = 1.5h_max1

At the maximum height, the velocity of the ball is zero, so we can find the time it takes for each ball to reach the maximum height by setting v = 0 in the equation for h(t):

t_max1 = v₁ / (2 x 5)

t_max2 = v₂ / (2 x 5)

Since Ben's ball reaches a maximum height that is 50% greater than Andrew's, we can write:

h_max2 = 1.5h_max1

-5(t_max2)² + v₂t_max2 + h0 = 1.5(-5(t_max1)² + v1 * t_max1 + h0)

Simplifying this equation, we get:

-5(t_max2)² + v₂t_max2 = -7.5(t_max1)² + 1.5v₁t_max1

We also know that Andrew's ball lands after 4 seconds, which means that h(4) = 0:

h(4) = -5(4)² + v1 * 4 = 0

-80 + 4v1 = 0

v1 = 80/4

v1 = 20 m/s

Solving these equations for t_max2 and v2, we get:

t_max1 = v1 / (2 x 5)

t_max1 = 20 / (2 x 5)  = 2 s

t_max2 = 1.5t_max1 = 3 s

v2 = 1.5v1 = 30 m/s

To find the time it takes for Ben's ball to land, we need to find the time t2 when h(t2) = 0.

We can use the equation for h(t) with v = v2, h0 = 0, and solve for t:

-5t² + v₂t = 0

-5t² + 30 = 0

5t² = 30

t² = 30/5

t² = 6

t = √6

t = 2.5 s

Therefore, Ben's ball lands approximately 2.5 seconds after Andrew's ball.

Learn more about parabolic trajectory here: https://brainly.com/question/13244761

#SPJ1

a) The simple interest earned is $704,

b) The interest earned when compounded daily is $975.19,

c) The difference between the two is $271.19.

To solve this problem, we will use the formulas for simple interest and compound interest.

Simple Interest = Principal x Interest Rate x Time

Compound Interest = Principal x (1 + Interest Rate / Number of Compounding Periods) ^ (Number of Compounding Periods x Time) - Principal

(a) Calculate the simple interest earned.

Simple Interest = $1100 x 0.08 x 8

Simple Interest = $704

(b) Calculate the interest earned if interest is compounded daily.

Compound Interest = $1100 x (1 + 0.08 / 365) ^ (365 x 8) - $1100

Compound Interest = $1100 x (1.000219178) ^ 2920 - $1100

Compound Interest = $1100 x 1.886533 - $1100

Compound Interest = $2075.19 - $1100

Compound Interest = $975.19

(c) How much more interest is earned on the account when the interest is compounded daily?

Difference = Compound Interest - Simple Interest

Difference = $975.19 - $704

Difference = $271.19

Therefore, the simple interest earned is $704, the interest earned when compounded daily is $975.19, and the difference between the two is $271.19.

Learn about Interest earned

brainly.com/question/2241772

#SPJ11

Answer:

Step-by-step explanation:

As before, I'll put slope-intercept first:

5. y = 1/4x + 1 ; y-2 = 1/4(x-4)

6. y = -1/2x + 2 ; y-1 = -1/2(x-2)

7. y = 1/3x + 1 ; y-2 = 1/3(x-3)

8. y = -x ; y-1 = 1(-x+1)

9. y = 2/3x -1 ; y-1 = 2/3(x-3)

Hope this helps!

6 hairless chimpanzees should the biologist expect to find in the troop.

What is the percentage?

A number or ratio that can be expressed as a fraction of 100 is referred to as a percentage in mathematics. If we need to calculate a percentage of a number, we should divide it by its entirety and then multiply it by 100. The percentage, therefore, refers to a part per hundred. Per 100 is what the word percent means. The letter "%" stands for it.

The sample number is 150.

Given that 3% of the chimpanzees are hairless, another sample indicates that 5% are hairless, and a third sample indicates that 4% are hairless.

The average percentage of chimpanzees of hairless is

(3% + 5% + 4%)/3

= 12%/3

= 4%

Now calculate 4% of 150:

4% of 150

= (4/100) × 150

= 6

To learn more about average percentage, click on the below link:

https://brainly.com/question/27024118

#SPJ1

1. False. The probabilities of two mutually exclusive events should add up to 1. In this case, the probability of it raining and not raining should add up to 1, but .4 + .52 = .92, which is not equal to 1.

2. False. The probabilities of all possible outcomes should add up to 1. In this case, the probabilities of the printer making 0, 1, 2, 3, or 4 or more mistakes should add up to 1, but .19 + .34 + -.25 + .43 + .29 = .97, which is not equal to 1. Additionally, the probability of an event cannot be negative, so -.25 is not a valid probability.

3. True. The probabilities of all possible outcomes add up to 1 (.19 + .38 + .29 + .15 = 1) and none of the probabilities are negative.

4. True. The probabilities of the three events add up to 1 (1/4 + 1/2 + 1/8 = 7/8) and none of the probabilities are negative.

5. The probability of getting a head on a fair coin toss is 1/2. The probability of getting either a head or a tail is 1, since those are the only two possible outcomes. The probability of getting neither a head nor a tail is 0, since there are no other possible outcomes.

Learn more about probability

brainly.com/question/30034780

#SPJ11

To show that Col A is the subspace spanned by the columns of A, we need to show that:

Col A is a subspace of RN.

Col A is spanned by the columns of A.

To show that Col A is a subspace of RN, we need to show that it satisfies the three subspace properties:

a. Col A contains the zero vector. This is true since the equation Ax = 0 always has a solution x = 0, which means that the zero vector is in Col A.

b. Col A is closed under addition. Suppose b1 and b2 are in Col A, so there exist x1 and x2 such that Ax1 = b1 and Ax2 = b2. Then, for any scalars c1 and c2, we have:

A(c1x1 + c2x2) = c1Ax1 + c2Ax2 = c1b1 + c2b2

which shows that c1b1 + c2b2 is also in Col A.

c. Col A is closed under scalar multiplication. Suppose b is in Col A, so there exists x such that Ax = b. Then, for any scalar c, we have:

A(cx) = c(Ax) = cb

which shows that cb is also in Col A.

Therefore, Col A is a subspace of RN.

To show that Col A is spanned by the columns of A, we need to show that any vector b in Col A can be expressed as a linear combination of the columns of A. By definition, there exists an x such that Ax = b.

This means that b is a linear combination of the columns of A, with the coefficients given by the entries of x. Specifically, if A has columns a1, a2, ..., an, then:

b = Ax = x1a1 + x2a2 + ... + xn an

Therefore, Col A is spanned by the columns of A.

Overall, we have shown that Col A is the subspace spanned by the columns of A.

For more questions like columns visit the link below:

https://brainly.com/question/14073699

#SPJ11

Answer:

The answer is -3 because it passes through (0,0) and (2,-6).

ANOVA results

1. This study is a between-subjects design.
2. The independent variable is the type of medication given and the dependent variable is the participants' blood pressure levels.

The effect size (hp2) for the ANOVA results is a measure of the strength of the relationship between the independent variable (type of medication) and the dependent variable (blood pressure levels).

A larger effect size indicates a stronger relationship between the two variables. It is important to remember that SPSS reports a partial-eta squared, which has a slightly different interpretation than Cohen's d or correlations.

Partial-eta squared is the proportion of the total variance in the dependent variable that is explained by the independent variable, after controlling for other factors. A partial-eta squared of .01 is considered a small effect, .06 is considered a medium effect, and .14 is considered a large effect.

Hence,

1. This study is a between-subjects design because each participant is only assigned to one group and is only exposed to one level of the independent variable.
2. The independent variable is the type of medication given (high dose HyBlox, low dose HyBlox, or placebo) and the dependent variable is the participants' blood pressure levels.

For more such questions on ANOVA.

https://brainly.com/question/23638404#

#SPJ11

|The events X and Y are marginally dependent in the roulette example.

Two events X and Y are marginally dependent when the probability of one event occurring affects the probability of the other event occurring. In the roulette example, the events X and Y are marginally dependent because the probability of X = red depends on the probability of Y = 15, and vice versa.

The probabilities can be calculated as follows:

P[X = red | Y = 15] = 1, since all odd numbers are red and 15 is an odd number.

P[Y = 15 | X = red] = 1/18, since there are 18 red numbers and only one of them is 15.

P[X = Red, Y = 15] = P[X = red | Y = 15] * P[Y = 15] = 1 * 1/36 = 1/36, since there are 36 numbers in total and only one of them is both red and 15.

P[Y = 15] = 1/36, since there are 36 numbers in total and only one of them is 15.

P[X = Red] = 18/36 = 1/2, since there are 18 red numbers and 36 numbers in total.

Therefore, the events X and Y are marginally dependent in the roulette example.

Learn more about Marginally dependent

brainly.com/question/14479881

#SPJ11

Answer: y = 1/3x + 2

Step-by-step explanation:

y =  mx+b

to find m: m = 3 - 5 / -3 - (- 9)  = -2 / 6 = - 1 / 3

to find b:

3 = -1 / 3 (-3) + b

3 = 1 + b

b = 2

Answer:

Either x/9 or 0.75 per cookie

Step-by-step explanation:

Let the number of cookies in a box be x.

The cost of x=9$

Then, the cost of one cookie= x/9

alternatively:

Considering one box contains 12 cookies,

The cost of a box of cookies= 9$

Then, the cost of one cookie= 9/12=0.75

The linear function that models the data is S = 3.8x - 14.506 and  the circumference of a finger with a ring size of 6 is 5.4 cm.

a. To find a linear function S that models the data, we need to find the slope and y-intercept of the line that best fits the data. The slope can be found by using the formula:

m = (y2 - y1) / (x2 - x1)

Using the first two data points, we can find the slope:

m = (7 - 4) / (5.66 - 4.87)

m = 3 / 0.79

m = 3.8

To find the y-intercept, we can use the formula:

y = mx + b

Substituting one of the data points and the slope into the formula and solving for b:

4 = (3.8)(4.87) + b

b = 4 - (3.8)(4.87)

b = -14.506

So the linear function that models the data is:

S = 3.8x - 14.506

b. To find the circumference of a finger with a ring size of 6, we can substitute S = 6 into the linear function and solve for x:

6 = 3.8x - 14.506

3.8x = 20.506

x = 5.4 cm

So the circumference of a finger with a ring size of 6 is 5.4 cm.

To know more about linear function refer to:

brainly.com/question/12788590

#SPJ11

The three cοrrect statements fοr the given circle are:

1)The radius οf the circle is 3 units.

2)The centre οf the circle lies οn the x-axis.

3)The radius οf this circle is the same as the radius οf the circle whοse equatiοn is x² + y² = 9.

All pοints in a plane that are at a specific distance frοm a specific pοint, the centre, fοrm a circle. In οther wοrds, it is the curve that a mοving pοint in a plane draws tο keep its distance frοm a specific pοint cοnstant. Circle's basic equatiοn is represented by:

(x-h)² + (y-k)² = r²

where the radius is r and the circle's centre's cοοrdinates are (h,k). Hence, we can quickly determine the equatiοn οf a circle if we knοw its radius and centre cοοrdinates.

The equatiοn οf the circle is given as:

x² + y²– 2x – 8 = 0

This can be cοnverted tο the standard fοrm.

Fοr that, we add and subtract 1 in the abοve equatiοn.

x² + y²– 2x – 8 +1 - 1  = 0

Rearranging,

x² – 2x + 1 + y²– 8 -1 = 0

(x - 1)² + y² = 8+1 = 9

Sο the equatiοn οf the circle in the standard fοrm is:

(x - 1)² + y² = 9

Nοw we will lοοk intο the given statements.

1) The radius οf the circle is 3 units.

This is true because radius = √9 = 3 units.

2) The centre οf the circle lies οn the x-axis.

The centre οf the given circle is (1,0).

Sο it dοes lie οn the x-axis.

3) The centre οf the circle lies οn the y-axis.

The centre is (1,0).

Sο this is nοt true.

4)The standard fοrm οf the equatiοn is (x – 1)² + y² = 3.

This is false.

5)  The radius οf this circle is the same as the radius οf the circle whοse equatiοn is x² + y² = 9

This is true because bοth equatiοns have 9 οn the right side οf the equatiοn.

Therefοre the three cοrrect statements fοr the given circle are:

1)The radius οf the circle is 3 units.

2)The centre οf the circle lies οn the x-axis.

3)The radius οf this circle is the same as the radius οf the circle whοse equatiοn is x² + y² = 9.

To learn more about the circle, follow the link.

https://brainly.com/question/1506955

#SPJ1

Answer: Your welcome!

Step-by-step explanation:

The slope of the line represents the amount of money that is donated each day, which is 25. The y-intercept represents the amount of money donated on the first day, which is 50.

Answer:

1/24 hour

Step-by-step explanation:

2 1/2 minutes = 2.5 minutes

2.5/60 = 1/24 hour

The values of the other trigonometric functions are:

sinα =√6/3

tanα=√2

cosecα=3/√6

secα=√3

cotα=1/√2

Given that cosα=√3/3

By definition cosine function , it is a ratio of adjacent side and hypotenuse.

So, adjacent side  =√3

Hypotenuse = 3

Let us find the third side of a triangle, by using pythagoras theorem.

√3²+x²=3²

3+x²=9

x=√6

So opposite side is √6.

Now let us find the other trigonometric values

Sinα= opposite side/hypotenuse

Sinα=√6/3

Tanα=opposite side/adjacent side

=√6/√3

Tanα=√2

Cosecα = hypotenuse/opposite side

=3/√6

Cosecα=3/√6

secα=hypotenuse side/adjacent side

=3/√3

=√3

secα=√3

cotα=Adjacent side/opposite side

=√3/√6

cotα=1/√2

To learn more on trigonometry click:

https://brainly.com/question/25122835

#SPJ12

The compete question is given in attachment.

Answer: 256

Step-by-step explanation: This is a rectangular prism and shows the length, width, and height, so we need to use the formula length times width times height. So 8 * 8 * 4 equals 256.

The figure's perimeter, rοunded tο the nearest hundredth, is rοughly 51.39 feet.

The tοtal length οf a twο-dimensiοnal shape's bοundary οr οuter edge is knοwn as its perimeter. It is the space encircling the periphery οf a shape. Yοu add up the lengths οf all a shape's sides tο determine its perimeter. The length units used tο measure the sides have an impact οn the perimeter measurement units.

given:

The lengths οf all the edges must be added up in οrder tο determine the figure's perimeter.

The figure is made up οf a rectangle with a length οf 3 feet and a breadth οf 9 feet, twο semicircles with a diameter οf 9 feet each, and twο semicircles.

A semicircle with a diameter οf 9 feet has the fοllοwing circumference:

C = 1/2 * pi * d

C = 1/2 * 3.14 * 9

C = 14.13 feet

The circumference οf bοth semicircles taken tοgether is thus:

P = 2*14.13P = 28.26 feet

The rectangle's perimeter is as fοllοws:

P(rectangle) is equal tο 2 * (length + width).

P(rectangle) = 3 + 9 * 2

24 feet P(rectangle)

As a result, the figure's οverall perimeter is as fοllοws:

Semicircles: P = P + P (rectangle)

P = 28.26 + 24

P = 52.26 feet

The figure's perimeter, rοunded tο the nearest hundredth, is rοughly 51.39 feet.

Anοther figure with the same perimeter as the οne given can be drawn in a variety οf ways.

The figure's perimeter, rοunded tο the nearest hundredth, is rοughly 51.39 feet.

To know more about perimeter visit:

brainly.com/question/6465134

#SPJ1

For a metal ball which is 3.25m long and weighs 15kg. Mass per meter of the metal bar would be 4.61 kg/m.

Accordingly, the metal bar's mass is 15 kg, Metal bar measures 3.25 meters in length. We're looking for the metal bar's mass per square meter.

Find the sum or total value of two or more numbers by adding them together. It is possible to calculate their difference by subtracting one number from the other. Times or repeated addition are examples of multiplication. After multiplying two or more numbers, the result is a product. Splitting an amount into equal parts is the process of division. When compared to multiplication, it is exactly the opposite.

Afterwards, we can calculate,

The mass per meter of the metal bar = mass of the metal bar / length of the metal bar

⇒ 15 kg / 3.25 m

[tex]= \frac{15}{3.25}=4.61kg/m[/tex]

Hence, the mass per meter of the metal bar would be 4.61 kg/m.

Learn more about Mass at:

brainly.com/question/30321193

#SPJ4

a) The cost function can be represented as C(x) = 6 + 1.180x for the first 20 units and C(x) = 6 + 1.180(20) + 0.806(x-20) for units over 20.

b) The total charge for using 15 units is C(15) = 6 + 1.180(15) = $23.70.

c) If the total charge is $73.93, we can use the cost function to solve for the number of units used.

The graph of the cost function will have a linear portion for the first 20 units and then another linear portion with a different slope for units over 20.

The average charge is $23.70/15 = $1.58 per unit.

Since the total charge is greater than the cost for the first 20 units, we know that more than 20 units were used. We can use the second part of the cost function to solve for x:

73.93 = 6 + 1.180(20) + 0.806(x-20)
73.93 = 30.6 + 0.806x - 16.12
73.93 - 30.6 + 16.12 = 0.806x
59.44 = 0.806x
x = 73.69 units
Therefore, 73.69 units were used.

To know more about cost function  click on below link:

https://brainly.com/question/29583181#

#SPJ11

The midpoint of the line segment whose endpoints are the given points is (8.1 , -21.7).

To find the exact distance between the points (9.6,-19.7) and (6.6,-23.7), we can use the distance formula:

distance = sqrt((x2 - x1)^2 + (y2 - y1)^2)

Substituting the given values:

distance = sqrt((6.6 - 9.6)^2 + (-23.7 - (-19.7))^2)

Simplifying:

distance = sqrt((-3)^2 + (-4)^2)

distance = sqrt(9 + 16)

distance = sqrt(25)

distance = 5

Therefore, the exact distance between the points is 5.

To find the midpoint of the line segment whose endpoints are the given points, we can use the midpoint formula:

midpoint = ((x1 + x2)/2 , (y1 + y2)/2)

Substituting the given values:

midpoint = ((9.6 + 6.6)/2 , (-19.7 + (-23.7))/2)

Simplifying:

midpoint = (16.2/2 , -43.4/2)

midpoint = (8.1 , -21.7)

Therefore, the midpoint of the line segment whose endpoints are the given points is (8.1 , -21.7).

Learn more about Exact distance

brainly.com/question/28676628

#SPJ11

A store scanner has a red laser wavelength of 650 nm. While a green laser pointer has a wavelength of 502 μm. The ratio of green to red wavelengths is 0.77.

To find this ratio, we need to divide the wavelength of the green laser by the wavelength of the red laser:

502 μm / 650 nm = 0.77

Note that we need to convert the units of the green laser wavelength from micrometers (μm) to nanometers (nm) in order to divide it by the red laser wavelength, which is already in nanometers. To do this, we multiply the green laser wavelength by 1000:

502 μm * 1000 = 502000 nm

So the ratio of green to red wavelengths is 502000 nm / 650 nm = 0.77.

This ratio indicates that the green laser has a shorter wavelength than the red laser. Generally, shorter wavelengths correspond to higher energy and higher frequency light. In the case of lasers, this means that the green laser is capable of producing a more intense and focused beam of light than the red laser.

For more questions like Ratios visit the link below:

https://brainly.com/question/11910706

#SPJ11

The required side length of the variable "x" is 12.8 units for the given figure.

When a line parallel to one side of a triangle intersects the other two sides in distinct spots, the other two sides are separated in the same ratio.

As we can see that both are similar quadrilaterals,

According to Thales's Theorem,

5:8 = 8:x

So, 5/8 = 8/x

Apply the cross-multiplication, and we get

5x = 8 × 8

x = 64/5

Apply the division operation, and we get

x = 12.8

Thus, the required side length of the variable "x" is 12.8 units.

Learn more about Thales's theorem here:

https://brainly.com/question/29626660

#SPJ1

The answer of the given question based on the sum of the two angles is ,the answer is  5x + 25° degrees.

The distributive property is fundamental property of arithmetic and algebra that allows us to  multiply single term or sum by factor. The property states that:

a×(b+c)=a×b+a×c

In words, this means that the when number or variable (a) is multiplied by  sum of two other numbers or variables (b + c), it is  same as  multiplying a by each term of  sum (b and c) and then adding two products. The distributive property can  be used in reverse to factor out common factor from  sum of terms.

The sum of these two angles is:

2x° + (3x + 25)°

= 2x° + 3x° + 25° (using the distributive property of multiplication)

= 5x° + 25°

Therefore, the sum of the two angles is 5x + 25° degrees.

To know more about Variable visit:

https://brainly.com/question/14845113

#SPJ1

The average rate of change of the function h(x)=3x2+6x−7 on the interval [5,10] is 94.6.

The average rate of change of the function h(x)=3x2+6x−7 on the interval [5,10] is calculated by taking the change in the y-value (h(10) - h(5)) and dividing it by the change in the x-value (10-5):

Average rate of change = (h(10)-h(5))/(10-5)

= (3(10)2+6(10)-7 - (3(5)2+6(5)-7))/(10-5)

= (745-272)/5

= 473/5

= 94.6

Therefore, the average rate of change of the function h(x)=3x2+6x−7 on the interval [5,10] is 94.6.

Learn more about average rate of change here:

https://brainly.com/question/28744270#

#SPJ11

The lakefront makes angles of approximately 30 degrees and 120 degrees with the boundaries of 2.8 miles and 1.8 miles, respectively. The remaining angle is approximately 30 degrees.

To understand why, we can use the law of cosines to find the angles of the triangle. Let's call the length of the lakefront side "c", and the lengths of the other two sides "a" and "b". Using the law of cosines, we can find the angles:

[tex]cos A = (b^2 + c^2 - a^2) / (2bc)[/tex]

[tex]cos B = (a^2 + c^2 - b^2) / (2ac)[/tex]

[tex]cos C = (a^2 + b^2 - c^2) / (2ab)[/tex]

Plugging in the values we know, we get:

[tex]cos A = (1.8^2 + 4^2 - 2.8^2) / (21.84) = 0.283[/tex]

[tex]cos B = (2.8^2 + 4^2 - 1.8^2) / (22.84) = 0.717[/tex]

[tex]cos C = (2.8^2 + 1.8^2 - 4^2) / (22.81.8) = -0.283[/tex]

Using the inverse cosine function, we can find the angles:

A ≈ 75 degrees

B ≈ 43 degrees

C ≈ 62 degrees

Therefore, the lakefront makes angles of approximately 30 degrees (180 - 75 - 75) and 120 degrees (180 - 43 - 17) with the other two boundaries, and the remaining angle is approximately 30 degrees (180 - 120 - 30).

For more questions like Angles visit the link below:

https://brainly.com/question/30258986

#SPJ11

Answer:

Let's first find the volume of the original cuboidal box:

Volume = Length x Width x Height = 3 x 3 x 2 = 18 cubic units

We can then set up an equation to relate the volume of the original box to the volume of the new cuboid:

Volume of new cuboid = Volume of original box

Let's call the length and height of the new cuboid "x" (since we know that the length and height are the same). We know that the width of the new cuboid is 15 units. Therefore, we can write:

Volume of new cuboid = Length x Width x Height = x x 15 x x = 15x^2

Now we can set up the equation:

15x^2 = 18

Dividing both sides of the equation by 15 gives:

x^2 = 18/15

Simplifying the right side of the equation gives:

x^2 = 1.2

Taking the square root of both sides of the equation gives:

x ≈ 1.095

Therefore, the length and height of the new cuboid are approximately 1.095 units.