Answers
Rules Governing the Allowed Combinations of Quantum Numbers
The principal quantum range (n) can't be zero. The allowed values of n are consequently 1, 2, 3, 4, and so on. The angular quantum quantity (l) can be any integer between zero and n - 1. If n = 3, for example, l can be either 0, 1, or 2.
Which of the following units of quantum numbers are not allowed and why?The set of quantum numbers n=1,l=1,ml=0,ms=+21 is no longer viable for an electron.
Which of the following units quantum numbers is allowed?So right set of quantum numbers is n=2,l=1,m=0,s=+21.
Which of the following is an allowed set of quantum numbers for an electron in the 4p orbital?Solution : The designation `4p` indicates that the orbital has a important quantum number `n = 4` and an angular-momentum quantum wide variety `l = 1`. The magnetic quantum quantity can have any of the values `-1, 0`, or `+1`.
Learn more about quantum here;
https://brainly.com/question/2292596
#SPJ1
Related Questions
A solution of sodium acetate (NaCH3COO) has a pH of 9.41. The acid-dissociation constant for acetic acid is 1.8×10−5. What is the molarity of the solution?
Answers
Answer: The equation of the dissociation of the solution is given below:NaCH3COO -----> CH3COO- + Na+HA -----> A- + H+Using the equation of dissociation constant, Ka:Ka = [A-][H+]/[HA][H] = [A-][H+] = 10^-(pH)[H+] = 10^-9.44[H+] = 3.63 × 10^-10 MThus, [A-] = 3.63 × 10^-10 M[HA] = [A-][H+]/Ka[HA] = (3.63 × 10^-10 M)^2 / 1.8 × 10^-5[HA] = 7.32 × 10^-15 M
Therefore, the molarity of the sodium acetate (NaCH3COO) solution is 7.32 × 10^-15 M.
Explanation:
Describe metallic bonding. In your answer, state two common properties of metals, and explain how metallic bonding produces these properties.
Answers
ANSWER : Metallic bonding is a type of chemical bonding that occurs between metal atoms. It involves the sharing of valence electrons between metal atoms, resulting in a sea of electrons that surrounds a lattice of positively charged metal ions.
Two common properties of metals are malleability and conductivity. Malleability refers to the ability of a metal to be shaped into thin sheets without breaking, while conductivity refers to the ability of a metal to conduct electricity and heat.
Metallic bonding produces these properties because the sea of delocalized electrons is free to move throughout the lattice of metal ions. When a force is applied to a metal, the ions in the lattice can slide past each other, facilitated by the movement of these electrons. This ability to move and slide past each other is what gives metals their malleability.
Similarly, the delocalized electrons are able to carry an electric current through the metal lattice. As electrons move through the metal lattice, they collide with the metal ions, transferring energy and producing heat. This transfer of energy is what gives metals their high thermal conductivity. In addition, the delocalized electrons are also able to transfer electrical charge through the metal lattice, resulting in the high electrical conductivity observed in metals.
In summary, metallic bonding produces the properties of malleability and conductivity in metals by creating a sea of delocalized electrons that can move freely throughout the lattice of metal ions, allowing for the movement of ions and the transfer of energy and electrical charge.
Explanation :
there you go home this helps :)
How much heat is required to raise the temperature of 16.1 g of water from −25 °C to 175 °C?
Answers
Approximately 13,412.48 Joules of heat are required to raise the temperature of 16.1 g of water from −25 °C to 175 °C.
What is Temperature?
Temperature is a measure of the degree of hotness or coldness of a substance, object or environment. It is a physical quantity that expresses the average kinetic energy of the particles that make up a substance or system.
q = m * c * ΔT
where q is the amount of heat required (in Joules), m is the mass of the substance (in grams), c is the specific heat capacity of the substance (in J/g·°C), and ΔT is the change in temperature (in °C).
In this case, we are given the mass of water (m = 16.1 g), the initial temperature (T1 = −25 °C), and the final temperature (T2 = 175 °C).
ΔT = T2 - T1 = 175 °C - (-25 °C) = 200 °C
Next, we can use the equation above to calculate the amount of heat required:
q = m * c * ΔT
= 16.1 g * 4.184 J/g·°C * 200 °C
= 13,412.48 J
Therefore, approximately 13,412.48 Joules of heat are required to raise the temperature of 16.1 g of water from −25 °C to 175 °C.
Learn more about Temperature from given link
https://brainly.com/question/26997500
#SPJ1
Write a summary paragraph discussing this experiment and the results. Use the following questions to help guide the content of your paragraph.
What was your hypothesis? According to your data, was your hypothesis was correct?
Why did some substances require larger additions before a color change was seen? What does this indicate about the strength of the acid or base?
What happened in the final step of the experiment? What does the final color indicate?
To what extent was this experiment useful in determining pH? Could a specific pH be determined using this procedure?
Why are acid and base indicators important? How could they be used in everyday life?
Answers
Answer:
The experiment tested the pH levels of various substances by using universal indicator and observing the color change. The hypothesis was that substances with a pH closer to 7 would require smaller amounts of indicator for a color change compared to substances with more extreme pH levels. The data collected supported this hypothesis, as substances with pH closer to 7 required smaller amounts of indicator. This indicates that the strength of the acid or base affects the amount of indicator needed for a color change. In the final step of the experiment, the universal indicator was added to a substance until the color stabilized, indicating the pH level. The final color observed indicates the pH level of the substance. While this experiment is useful in determining the approximate pH level of a substance, it cannot determine a specific pH. Acid and base indicators are important as they allow us to determine the pH level of a substance, which can be useful in everyday life, such as in pool maintenance or testing the acidity of soil for gardening.
Explanation:
Answer:
A hypothesis states your predictions about what your research will find. It is a tentative answer to your research question that has not yet been tested. For some research projects, you might have to write several hypotheses that address different aspects of your research question. Some substances work only for strong bases or weak bases or strongs acids. Example, if you have a weak base solution (pH=8) and you add phenolphthalein, then you need a lot of phenolpthalein drops to see a pink color change because phenolphthalein is for stronger bases 1. liquids such as lemonade clear soda and the clear shampoo would be acidic where as the baking soda dish soap and fertilizer would be basic, my hypothesis was somewhat correct all but the soda was correct by the looks of the colors.2. Some liquids required more because the strength of the acidity or base wasn't very strong thus requiring a larger amount of liquid added to the cabbage indicator.3. At the end of the experiment when the vinegar and baking powder were added together the colors mixed into a mix of the two more purple then the cabbage indicator and there was plenty of bubbles in the solution.4. Not very useful unless you know exactly what the colors indicate. Yes, all that would be needed is a ph scale.5. Acids and base indicators help us identify whether a substance is acidic or basic. They can be used to detect the nature of soil, samples etc which can be helpful.Acid-base indicators are most often used in a titration to identify the endpoint of an acid-base reaction. They are also used to gauge pH values and for interesting color-change science demonstrations.Calculate the number of moles of Cu
( nCu
) in 2.2×1021
atoms of Cu
Answers
We can use this value to convert the given number of atoms of copper to moles of copper:
nCu = (2.2 x 10^21 atoms) / (6.022 x 10^23 atoms/mol)
nCu = 3.65 x 10^-3 mol
Therefore, there are approximately 3.65 x 10^-3 moles of copper (Cu) in 2.2 x 10^21 atoms of copper.
What is Avogadro's number?The Avogadro number, also known as Avogadro's constant, is a fundamental physical constant representing the number of particles (usually atoms or molecules) in one mole of a substance. It is defined as exactly 6.02214076 × 10^23 particles per mole.
What is the role of Avogadro's Number?The Avogadro number plays an important role in chemistry, physics, and other sciences that deal with the properties and behavior of matter at the atomic and molecular scale. It is used to convert the mass of a substance and the number of particles it contains and to determine the number of atoms or molecules involved in chemical reactions.
To learn more about atoms, visit here:
https://brainly.com/question/30898688
#SPJ1
HELPPPOP ILL MARK YOU BRAINLIST
What is the mass of 6.30 moles of
magnesium chloride, MgCl2 ? Express your answer with the appropriate units.
Answers
Answer:
Explanation:
599.8293 grams
classification, dietry source,biochemical function and specific deficiency disease of vitamins
Answers
Answer:
Vitamins are essential organic compounds that are required in small amounts to maintain various physiological processes in the human body. They are classified into two groups: fat-soluble vitamins (A, D, E, and K) and water-soluble vitamins (B-complex vitamins and vitamin C).
The dietary sources and biochemical functions of each vitamin are as follows:
Vitamin A - Found in liver, fish, eggs, and dairy products. It is required for vision, immune function, and growth.
Vitamin D - Found in fatty fish, eggs, and fortified dairy products. It is required for bone health and helps the body absorb calcium.
Vitamin E - Found in nuts, seeds, and vegetable oils. It acts as an antioxidant and helps protect cells from damage.
Vitamin K - Found in green leafy vegetables and certain fruits. It is required for blood clotting.
B-complex vitamins - Found in meat, fish, poultry, whole grains, and fortified cereals. They play various roles in energy production, nervous system function, and red blood cell formation. Examples include:
Vitamin B1 (Thiamine) - Required for energy production and nerve function. Deficiency can cause beriberi.
Vitamin B2 (Riboflavin) - Required for energy production and cell growth. Deficiency can cause skin and eye disorders.
Vitamin B3 (Niacin) - Required for energy production and proper digestion. Deficiency can cause pellagra.
Vitamin B5 (Pantothenic Acid) - Required for energy production and hormone synthesis. Deficiency is rare.
Vitamin B6 (Pyridoxine) - Required for protein metabolism and immune function. Deficiency can cause anemia and neurological problems.
Vitamin B7 (Biotin) - Required for energy production and proper metabolism. Deficiency is rare.
Vitamin B9 (Folate) - Required for cell growth and development. Deficiency can cause anemia and birth defects.
Vitamin B12 (Cobalamin) - Required for nerve function and DNA synthesis. Deficiency can cause anemia and neurological problems.
Vitamin C - Found in citrus fruits, strawberries, kiwi, and bell peppers. It acts as an antioxidant and is required for collagen synthesis. Deficiency can cause scurvy.
In summary, vitamins are essential nutrients required for a range of functions in the body. They can be obtained through a balanced diet, and deficiency of any vitamin can lead to various health problems.
Explanation:
Find the rate law of the experiment if the slope is 13.091 ml/s. And the equation is rate=k[h2o2][I^-]^y
Answers
The rate law of the experiment is rate = k[H2O2][I-]y, where k is the rate constant, H2O2 is the concentration of hydrogen peroxide, I- is the concentration of iodide ion, and y is the reaction order with respect to iodide ion.
What is hydrogen peroxide?Hydrogen peroxide is a compound made up of two hydrogen atoms and two oxygen atoms (H2O2). It is a colorless, odorless liquid that is slightly more viscous than water and is a strong oxidizing agent. Hydrogen peroxide is highly reactive and is commonly used as a bleaching agent, disinfectant, and antiseptic. It can also be used as a fuel, oxidizer, and propellant. In the environment, hydrogen peroxide is formed naturally by the breakdown of organic matter, such as plants and animals, and is found in rain and snow.
The slope of the experiment, 13.091 ml/s, is equal to k[H2O2]y. Since the slope is 1, the rate law is rate = k[H2O2][I-]1, which means the reaction is first order with respect to iodide ion.
To learn more about hydrogen peroxide
https://brainly.com/question/25566753
#SPJ1
At what absolute temperature do the Celsius and Fahrenheit temperature scales give
the same numerical value? What is the value?
Answers
Answer: The answer to this question is negative 40 degrees Fahrenheit
Explanation:
I need help in this question, i know that the concentration of H30+ in the propanoic acid is 1.5*10^-3
Answers
The concentration of ammonia in the solution is calculated as 4.48*10⁻⁴ M.
What is meant by concentration?In chemistry, the abundance of constituent divided by total volume of a mixture is known as concentration.
C₃H₇COOH + NH⁴⁺ ⇌ C₃H₇COOH⁻ + NH⁴⁺
The propanoic acid (C3H7COOH) is a weak acid with known Ka value (1.3*10^-5), so we use the Henderson-Hasselbalch equation to calculate concentration of the acetate ion (C3H7COO-) in the solution:
pKa = -log(Ka) = -log(1.3*10⁻⁵) = 4.89
pH = pKa + log([C₃H₇COO-]/[C₃H₇COOH])
[C₃H₇COOH] = 0.18 M
[C₃H₇COOH-] = Ka*[C₃H₇COOH]/[H+] = (1.310⁻⁵)(0.18)/10^-pH
Kb = [ NH⁴⁺][OH⁻]/[NH₃]
Kb = [NH⁴⁺][OH⁻]/[NH₃] ≈ [NH⁴⁺][OH⁻]/0
[OH⁻] = Kb*[NH₃]/[NH⁴⁺] = (1.7610⁻⁵)[NH3]/0.18
[H⁺][OH-] = 1.0*10⁻¹⁴
[H⁺] = 10^-pH
NH₃] = [OH⁻] = 1.010^-14/[H⁺] - 2.4910⁻⁷
[NH₃] = 4.48*10⁻⁴ M
Therefore, the concentration of ammonia in the solution is 4.48*10⁻⁴ M.
To know more about concentration, refer
https://brainly.com/question/17206790
#SPJ1
4. What ion would form for Sodium if the electron arrangement is:
E. 2.8.6
F. 2.8.2
Answers
Sodium (Na) has 11 electrons and is located in Group 1 of the periodic table.
E. 2.8.6 - Sodium will lose one electron from its outermost shell, which has 6 electrons, to achieve the stable electron configuration of the previous noble gas, neon (2.8). This will result in the formation of a sodium ion with a +1 charge, written as Na+.
F. 2.8.2 - Sodium will lose two electrons from its outermost shell, which has 2 electrons, to achieve the stable electron configuration of the previous noble gas, neon (2.8). This will result in the formation of a sodium ion with a +2 charge, written as Na2+.
It's important to note that the formation of Na2+ is highly unlikely under normal conditions, as the ionization energy required to remove a second electron from a sodium atom is much higher than the energy required to remove the first electron.
100 POINTS I JUST NEED THE CONCLUSION THE OTHER STUFF IS THIER FOR YOU TO USE TO FIGURE OUT THE ANSWER
Properties of Light Lab Report
Instructions: In the Properties of Light—Bending Light Lab you will explore how light rays interact as they pass from one material, or medium, to another. Record your observations in the lab report below. You will submit your completed report.
Name and Title: jenna davis, Mrs.sipe, 3/2/23, 05.02
Include your name, instructor's name, date, and name of lab.
Objective(s):
In your own words, what was the purpose of this lab?
The purpose is to see how light bends in different circumstances.
Hypothesis:
In this section, please include the if/then statement you developed during your lab activity. This statement reflects your predicted outcome for the experiment.
If I project light rays through (choose one: air, water, glass), then they will refract, or bend, the most.
Procedure:
Please be sure to identify the test variable (independent variable) and the outcome variable (dependent variable) for this investigation. Remember, the test variable is what is changing in this investigation. The outcome variable is what you are measuring in this investigation.
Test variable (independent variable):
Outcome variable (dependent variable):
Select Intro to begin.
Once the simulation loads, you will drag the protractor onto the screen so that the 0 lines up with the dotted line in the center of the screen. Select the More Tools icon at the bottom of the lab interactive and be sure to select the Normal and Angles boxes. Do Not move the laser light.
You will test all three materials in the bottom, blue half of the screen: air, water, and glass. Remember, do not move the laser light.
Record your observations of how the light rays interact as they pass from air, on the top of the screen, through the three materials on the bottom of the screen
Data:
Record the data from each trial in the data chart below. Be sure to fill in the chart completely.
Material
Interactions
List any observations you made as the light rays passed from the air on the top of the screen to the selected material on the bottom of the screen.
Evidence
Using the protractor, measure the angle as the light passes from the top material to the bottom material on the screen. Also, note the index of refraction for each as indicated on the screen.
Trial One
Air on top
Laser keeps going straight
Bottom angle: 45
Bottom index of refraction:1.00
Air on bottom
The light is reflected
Trial Two
Air on top
The light is refracted
Bottom angle:31
Bottom index of refraction:1.33
Water on bottom
The reflected ray is dimmer
Trial Three
Air on top
The light is reflected
Bottom angle:29
Bottom index of refraction:1.50
Glass on bottom
The light is refracted
The reflected ray is dimmer
Conclusion:
Your conclusion will include a summary of the lab results and an interpretation of the results. Please write in complete sentences.
Did your data support your hypothesis? Use evidence to explain.
Which material refracted the light rays the most: air, water, or glass?
Which material refracted the light rays the least: air, water, or glass?
How does density affect refraction?
Diamonds are a very dense material. Predict what would happen to the light ray if you projected it from air through a diamond.
Explain where you observe reflection, refraction, and absorption of light in your everyday activities.
Answers
Answer:
Conclusion:
The purpose of this lab was to observe how light rays interact as they pass from one material to another. The hypothesis stated that if light rays are projected through a material, they will refract the most. The data collected in this lab supports the hypothesis. When light rays were projected through air onto the different materials, they either refracted or reflected. The angle of refraction was measured for each material and it was found that the angle decreased as the index of refraction increased.
Water refracted the light rays the most while air refracted the least. The density of a material affects refraction because it changes the speed at which light travels through the material. A more dense material causes light to travel slower and bend more, leading to greater refraction. If light was projected through a diamond, it would refract significantly due to the high density of diamond.
Reflection, refraction, and absorption of light can be observed in many everyday activities. Reflection can be seen in mirrors, windows, and other reflective surfaces. Refraction can be observed when light passes through a lens or prism, causing the light to bend and create a spectrum of colors. Absorption can be seen when certain colors of light are absorbed by objects, making them appear a different color.
he decomposition of sulfuryl
chloride (SO2Cl2) is a first-order process. The rate
constant for the decomposition at 660 K is 4.5 x 10-2 s-1.
(a) If we begin with an initial SO2Cl2 pressure of 450 torr,
what is the partial pressure of this substance after 63 s?
(b) At what time will the partial pressure of SO2Cl2 decline
to one-third its initial value?
Answers
1) The pressure is 26.4 torr
2) The time is 24.4 s
What is a decomposition reaction?A decomposition reaction is a type of chemical reaction in which a single compound breaks down into two or more simpler substances. In other words, it is the opposite of a synthesis reaction, where two or more substances combine to form a more complex substance.
We know that;
[tex]lnPt =lnPo - kt\\lnPt = ln(450) - ( 4.5 x 10^-2 * 63)\\Pt = eln(450) - ( 4.5 x 10^-2 * 63)\\Pt = 26.4 torrln[1/3(450)] = ln 450 - (4.5 x 10^-2t)\\5 = 6.1 - 0.045t\\5 - 6.1 = - 0.045t\\t = 24.4 s[/tex]
Learn more about decomposition reaction:https://brainly.com/question/16987748
#SPJ1
The system available in industry for the detection of foreign substance in cotton
Answers
Answer:
Explanation:
One system available in the industry for the detection of foreign substances in cotton is the High Volume Instrument (HVI) system. The HVI system measures several properties of cotton fibers, such as length, strength, micronaire, color, and foreign matter content. The foreign matter content measurement detects and quantifies any extraneous materials present in the cotton fibers, such as dirt, seed coat fragments, and leaf particles. The HVI system is widely used in the cotton industry for quality control and grading purposes.
How many molecules are present in 15.7 grams of zinc oxide? Show the results of 1.144 x 1023 molecules
Answers
In 15.7 grams pf zinc oxide, there are roughly 1.144 x 1023 molecules. In order to treat or prevent skin irritation from things like wounds, burns, and diaper rash, zinc oxide is a medicinal cream, ointment, or paste.
How does zinc oxide affect the skin?Diaper rash is treated and prevented using topical zinc oxide lotion. As a result of diaper use, it is also utilized to shield skin from irritation and moisture.
Does zinc oxide pose a risk to people?* "Metal fume fever" can be brought on by exposure to zinc oxide. This flu-like condition causes symptoms like a metallic taste in people's mouths, headache, fever, chills, pains, tightness in the chest, and cough. After exposure, the symptoms may not appear for some hours, and they often manifest one or two days later.
To know more about zinc oxide visit:
https://brainly.com/question/30101572
#SPJ1
Which of the following statements is true about dilute and concentrated solutions?
A. Concentrated solutions have a higher solvent-to-solute ratio than dilute solutions.
B. Concentrated solutions contain more solute than dilute solutions.
C. Dilute solutions contain more solute than concentrated solutions.
D. Dilute solutions have a higher solvent-to-solute ratio than concentrated solutions.
Answers
Answer:
Explanation:The statement that is true about dilute and concentrated solutions is: Dilute solutions have a higher solvent-to-solute ratio than concentrated solutions.
Explanation:
In dilute solutions, the amount of solute is relatively low compared to the amount of solvent. Conversely, in concentrated solutions, the amount of solute is relatively high compared to the amount of solvent.
For example, if you add a teaspoon of sugar to a cup of water, you have a dilute solution. If you add five teaspoons of sugar to the same cup of water, you have a concentrated solution.
So, the correct statement is that dilute solutions have a higher solvent-to-solute ratio than concentrated solutions.
1. Overall, do you think the Chernobyl accident has actually been ecologically beneficial for the ecosystems within the exclusion zone? Which do you think is more damaging or dangerous to the biodiversity – the contamination from the radioactive fallout, or the presence of a large human population? Justify your answer.
Answers
No, I do not think the Chernobyl accident has been ecologically beneficial for the ecosystems within the exclusion zone.
What is exclusion zone?An exclusion zone is an area that is restricted by a government or other authority, typically in response to a threat to public safety. It is used to limit or prevent access to a certain location, often due to the presence of hazardous material or a natural disaster. Exclusion zones can be created around a disaster area, a nuclear facility, or a toxic waste site, and in some cases, they can be used to protect sensitive military installations.
No, I do not think the Chernobyl accident has been ecologically beneficial for the ecosystems within the exclusion zone. The contamination from the radioactive fallout is more damaging and dangerous to biodiversity than the presence of a large human population. This is because the radiation exposure from the accident has resulted in widespread ecological damage, including the death of trees and other vegetation, disruption of food webs, and the displacement of species. Additionally, radioactive contaminants can accumulate in the tissues of plants and animals, and can be passed up the food chain, leading to further damage. In contrast, the presence of a large human population can cause localized disturbances, such as habitat destruction, but these effects are generally localized, and can be mitigated by conservation measures.
To learn more about exclusion zone
https://brainly.com/question/2521517
#SPJ1
Water has a specific heat of 4.184 J/g°C. If the temperature of 250 g of
water changes from 22.9°C to 14.7°C, how much heat energy was removed
from the water?
Answers
Q = m x c x ΔT
where Q is the amount of heat energy in Joules (J), m is the mass of the water in grams (g), c is the specific heat capacity of water in J/g°C, and ΔT is the change in temperature in °C.
In this case, we have:
m = 250 g
c = 4.184 J/g°C
ΔT = 22.9°C - 14.7°C = 8.2°C (note that the temperature change is negative because the water is losing heat)
Substituting these values into the formula:
Q = 250 g x 4.184 J/g°C x (-8.2°C)
Q = -8,188.4 J
The negative sign indicates that heat energy was removed from the water (as opposed to added). Therefore, 8,188.4 J of heat energy was removed from the water.
Which of the following is NOT an accurate way to measure wavelength?
A. crest to trough
B. trough to trough
C. half crest to half crest
D. crest to crest
Answers
Answer: D
Explanation: crest to crest to the crust to crust to the west to west.
In each row check off the boxes that apply to the highlighted reactant
HClO(aq)+(ch3)3 N(aq)->ClO-(aq)+(CH3)3(aq)NH4+ in this HCl is
Brønsted-Lowry base
Brønsted-Lowry Acid
Lewis acid
Lewis base
Answers
the checkboxes next to each row's HClO(aq)+(ch3)3 N(aq)->ClO-(aq)+(CH3)3 reactant to indicate that you agree with it (aq) In this HCl, the NH4+ is Brennstoff-Lowry Acid.
Why do people utilize HCl chemical?In the food, textile, metal, & rubber sectors, hydrogen chloride (HCl), also known as bleaching agent, is frequently used to neutralize alkaline substances. It quickly hydrolyzes if exposed to water and is neutralized if discharged into the soil.
What's the generic term for HCl?A gas at ordinary temperature and pressure, hydrogen chloride (HCl) is a combination of the metals hydrogen and chlorine. Hydrochloric acid is a gaseous mixture of the gas and water.
To know more about HCl visit:
https://brainly.com/question/29204122
#SPJ1
what quality is represented by the metric system prefix deci-?
Answers
The prefix "deci" is used to express one tenth of the unit of any measurement. For example decimeter is the one tenth of the one meter length.
What is metric system ?Metric system is a n international system of units. Under the direction of an international standards body, the historical evolution of these systems culminated in the definition of the International System of Units (SI) in the middle of the 20th century. Metrication is the process of converting to the metric system.
There are many prefix that indicates the exact measurement of a variable under different situations. There are prefix like, centi, deci, micro, milli etc. The prefix deci is used to express one tenth (1/10) of the unit.
One decimeter is one tenth of 1 m. That is 10⁻¹ m. Similarly we can use the prefix deci to other variables such as deciliter, decigram etc. Usually used to express small length in metric system.
Find more on metric system:
https://brainly.com/question/25966695
#SPJ9
Give the symbols for the following elements: nitrogen sodium chromium
Answers
nitrogen = N
sodium = Na
chromium = Cr
A game of tug-of-war, in which two teams pull on opposite ends of a rope is shown here. What needs to happen to make the center of the rope go in one direction?
The ground needs to provide more friction for both teams.
Both teams have the same amount of people.
The rope needs to have no mass of its own.
One team pulls with more force than the other.
Answers
Answer:
One team pulls with more force than the other
Lithium has an atomic mass of 6.941 amu. Lithium has two common isotopes.
Answers
Lithium has an atomic mass of 6.941 amu. Lithium has two common isotopes as lithium-6 and lithium-7.
What are isotopes?
Isotopes are the elements which have same atomic number but different mass number. For example - Carbon has three isotopes- C-12, C-13, C-14. If an element is found to have different isotopes in nature then it’s average atomic mass can be calculated as
Average atomic mass = (m×a + n×b) / (m+n)
Where a = Atomic mass of isotope A of element X
b = Atomic mass of isotope B of element X
A and B are present in m:n ratio in nature.
Therefore, Lithium has an atomic mass of 6.941 amu. Lithium has two common isotopes as lithium-6 and lithium-7.
Learn more about isotopes, here:
https://brainly.com/question/11680817
#SPJ9
A solution is made by mixing 35 g of benzene and 126 g of acetyl bromide.
Calculate the mole fraction of benzene in this solution. Round your answer to 2 significant digits.
Answers
The mole fraction of benzene in the solution is 0.415, rounded to two significant digits.
What is Moles?
Moles are a unit of measurement used in chemistry to express the amount of a substance. Whether an object becomes positively or negatively charged depends on the material it (repels/contacts).This number is known as the mole fraction of benzene in the solution is 0.415, rounded to two significant digits.
To calculate the mole fraction of benzene in the solution, we first need to calculate the total number of moles of benzene and acetyl bromide in the solution.
The molar mass of benzene (C6H6) is 78.11 g/mol.
The molar mass of acetyl bromide (CH3COBr) is 199.89 g/mol.
Number of moles of benzene = 35 g / 78.11 g/mol = 0.4482 mol
Number of moles of acetyl bromide = 126 g / 199.89 g/mol = 0.6301 mol
Total number of moles in the solution = 0.4482 mol + 0.6301 mol = 1.0783 mol
Now we can calculate the mole fraction of benzene:
Mole fraction of benzene = Number of moles of benzene / Total number of moles in solution
Mole fraction of benzene = 0.4482 mol / 1.0783 mol = 0.415
Therefore, the mole fraction of benzene in the solution is 0.415, rounded to two significant digits.
Learn more about Moles from given link
brainly.com/question/29367909
#SPJ1
what is the iupac name for the following compound? question 20 options: heptaneA. hexaneB. heptaneC. octaneD. nonane
Answers
Answer:
what is the IUPAC name for the following compound? question 20 options: heptane A. hexane B. heptane C. octane D. nonane
C. Octane
Explanation:
Glycerin has a density of 1.26
g
/
c
m
3
g/cm
3
. Which of these other liquids would sink through glycerin?
Answers
According to the question water, isopropyl alcohol, and ethanol would sink through glycerin.
Glycerine has a relative density of 1.26. This indicates that glycerine is 1.26 times more abundant than water. Therefore, the glycerine sinks water
What is glycerin?Glycerin, also known as glycerol, is a clear, odorless liquid derived from plant and animal sources. It is a sugar alcohol with three carbon atoms and is used in a variety of products, including pharmaceuticals, food, cosmetics, and personal care products.
In the pharmaceutical industry, it is used as a solvent, stabilizer, and preservative in medications. In the cosmetic industry, it is used as a skin conditioning agent, emollient, and moisturizer. Glycerin is also used to make soaps, shampoos, and lotions. It is a non-toxic and non-irritating substance, making it safe for use in many products.
To learn more about glycerin:
brainly.com/question/4463307
#SPJ1
From his experiments, J. J. Thomson concluded that
cathode ray particles can move at very fast speeds.
cathode ray particles can be moved by electric current.
atoms contain small positively charged particles that are called protons.
atoms contain small negatively charged particles that are called electrons.
Answers
J.J Thomson performed some experiments to demonstrates the structure of atom. He discovered the small negatively charged particles later called the electrons. Hence, option d is correct.
What was atomic model by J.J Thomson ?There were various atomic models to describe the structure and electronic properties of atom. J.J. Thomson conducted the cathode ray experiment where, he he hit the cathode ray to and measured the electric charge with electrometer.
From this, he concluded that the electric charge and the cathode rays was combined and are the same entity. The negatively charged particles in the atoms then called as electrons. Therefore, option d is correct.
Thomson demonstrated the plum- pudding model of atom, where the negatively charged electrons are randomly located inside the atom as the seeds in the plum-pudding. But later modern atomic models replaced this concept.
Find more on J. J. Thomson:
https://brainly.com/question/12839076
#SPJ9
I WILL MARK BRAINLIEST
Tool used for spreadsheets and analysis.
Microsoft PowerPoint
Microsoft Excel
Microsoft Word
Tool used to create presentations.
Microsoft PowerPoint
Microsoft Excel
Microsoft Word
Tool used for authoring documents.
Microsoft Word
Microsoft Excel
Microsoft PowerPoint
Choose the correct tool for the given scenario.
--You have been hired as an intern by a local library. They would like a report on which types of books tend to get borrowed the most to determine what additional books they should purchase. Which of these methods do you think would be the best approach?
Research the problem and give a presentation on how you approached the problem, and provide the different books as examples on various slides of the presentation.
Research the problem and provide a list in a spreadsheet with the book titles and the number of times they are borrowed.
Choose the correct tool for the given scenario.
--You have been working as a customer care specialist answering the phone and helping with technical support. Your manager has asked you to describe the most difficult problems you faced and how you handled them. Which of these would be best.
An email to your manager with this information.
A document describing each problem and how you handled it.
A spreadsheet with all your calls and the toughest ones highlighted using fill color.
Answers
1) Tool used fοr spreadsheets and analysis are Micrοsoft Excel. Thus, option (b) is cοrrect.
2) Tool used tο create presentations are Microsoft PowerPoint. Thus, Option a) is cοrrect.
What's is a spreadsheet?A spreadsheet is a type of cοmputer software that captures, displays, and manipulates data that is οrganized in rows and columns.
Users can style, organize, and cοmpute data in a spreadsheet using Microsoft Excel.
You can use PowerPoint on your Cοmputer, Laptop, or mobile device to: Create slideshows from inception οr from a template
Microsoft Word is a word editing sοftware that can create basic and complicated documents.
3) Tool used for authoring dοcuments are Microsoft Word. Thus, Option a) is cοrrect.
4) the best apprοach would be Research the problem and give a presentation on how yοu approached the problem, and provide the different books as examples on various slides of the presentation. Thus, Option a) is cοrrect.
5) The best wοuld be A spreadsheet with all your calls and the toughest ones highlighted using fill cοlor. Thus, Option c) is cοrrect.
Learn mοre about Microsoft Excel visit
brainly.com/question/24202382
#SPJ1
Hydrogen produced from a hydrolysis reaction was collected over water. The data is compiled in the table.
Total volume of H2(g) collected 94.27 mL
Temperature 23.0 °C
Barometric pressure 738 mmHg
Vapor pressure of water at 23.0 °
21.0 mmHg
Calculate the moles of hydrogen gas produced by the reaction.
Answers
To calculate the moles of hydrogen gas produced by the reaction, we need to use the ideal gas law equation:
PV = nRT
Where:
P = Total pressure (barometric pressure - vapor pressure of water)
V = Volume of hydrogen gas collected
n = Number of moles of hydrogen gas
R = Universal gas constant (0.08206 L·atm/mol·K)
T = Temperature in Kelvin (23°C + 273.15)
What is the moles of hydrogen gas produced by the reaction?First, let's calculate the total pressure:
Total pressure = Barometric pressure - Vapor pressure of water
Total pressure = 738 mmHg - 21.0 mmHg
Total pressure = 717.0 mmHg
Now, we can plug in the values into the ideal gas law equation:
n = PV/RT
n = (717.0 mmHg)(94.27 mL)/(0.08206 L·atm/mol·K)(23.0°C + 273.15)
n = 0.00345 mol
Therefore, the moles of hydrogen gas produced by the reaction is 0.00345 mol.
Learn more about hydrogen gas from
https://brainly.com/question/21755485
#SPJ1